First, we don't need to call prlsdkApplyConfig after
creating new VM or containers, because it's done in
functions prlsdkCreateVm and prlsdkCreateCt.
No need to check, if domain exists in the list after
prlsdkAddDomain.
Also organize code, so that we can call virObjectUnlock
in one place.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
This patch replaces code, which creates domains by
running prlctl command.
prlsdkCreateVm/Ct will do prlsdkApplyConfig, because
we send request to the server only once in this case.
But prlsdkApplyConfig will be called also from
parallelsDomainDefineXML function. There is no problem with
it, parallelsDomainDefineXML will be refactored later.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Rewrite code, which applies domain configuration given
to virDomainDefineXML function to the VM of container
registered in PCS.
This code first check if there are unsupported parameters
in domain XML and if yes - reports error. Some of such
parameters are not supported by PCS, for some - it's not
obvious, how to convert them into PCS's corresponding params,
so let's put off it, and implement only basic params in
this patch.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Change domain state using parallels SDK functions instead of
prlctl command.
We don't need to send events from these functions now, becase
events handler will send them. But we still need to update
virDomainObj in privconn->domains.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Subscribe to events from parallels server. It's
needed for 2 things: to update cached domains list
and to send corresponding libvirt events.
Parallels server sends a lot of different events, in
this patch we handle only some of them. In the future
we can handle for example, changes in a host network
configuration or devices states.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Move macro parallelsDomNotFoundError to file parallels_utils.h, because
it will be used in parallels_sdk.c.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Obtain information about domains using parallels sdk instead of prlctl.
prlsdkLoadDomains functions behaves as former parallelsLoadDomains with
NULL as second parameter (name) - it fills parallelsConn.domains list.
prlsdkLoadDomain is now able to update specified domain by given
virDomainObjPtr.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
virConnect.privateData is void *, so we can't access
fields of parallelsConn, pointer to which is stored in
virConnect.privateData. So replace all occurences of
conn->privateData->storageState with privconn->storageState.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1159180
The virStoragePoolSourceFindDuplicate only checks the incoming definition
against the same type of pool as the def; however, for "scsi_host" and
"fc_host" adapter pools, it's possible that either some pool "scsi_host"
adapter definition is already using the scsi_hostN that the "fc_host"
adapter definition wants to use or some "fc_host" pool adapter definition
is using a vHBA scsi_hostN or parent scsi_hostN that an incoming "scsi_host"
definition is trying to use.
This patch adds the mismatched type checks and adds extraneous comments
to describe what each check is determining.
This patch also modifies the documentation to be describe what scsi_hostN
devices a "scsi_host" source adapter should use and which to avoid. It also
updates the parent definition to specifically call out that for mixed
environments it's better to define which parent to use so that the duplicate
pool checks can be done properly.
Since the secondary drivers are only active when the primary
driver is also the Parallels driver, there is no need to use the
different type specific privateData fields. The object that was
being stored in the storagePrivateData can easily be kept in the
parallelsConn struct instead.
To prepare for introducing a single global driver, rename the
virDriver struct to virHypervisorDriver and the registration
API to virRegisterHypervisorDriver()
Add files parallels_sdk.c and parallels_sdk.h for code
which works with SDK, so libvirt's code will not mix with
dealing with parallels SDK.
To use Parallels SDK you must first call PrlApi_InitEx function,
and then you will be able to connect to a server with
PrlSrv_LoginLocalEx function. When you've done you must call
PrlApi_Deinit. So let's call PrlApi_InitEx on first .connectOpen,
count number of connections and deinitialize, when this counter
becomes zero.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Coverity complains that calling virNetworkDefFree(def), then jumping
to the cleanup: label which calls virNetworkDefFree(def) could result
in a double_free. Just remove the call from the if statement.
Libvirt measures vram in Kbytes, not in bytes, so calculation
of Mbytes was incorrect. PCS server can take vram argument
with units, so I added K postfix to make params a little bit clearer.
There were numerous places where numatune configuration (and thus
domain config as well) was changed in different ways. On some
places this even resulted in persistent domain definition not to be
stable (it would change with daemon's restart).
In order to uniformly change how numatune config is dealt with, all
the internals are now accessible directly only in numatune_conf.c and
outside this file accessors must be used.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
So far, we only report an error if formatting the siblings bitmap
in NUMA topology fails.
Be consistent and always report error in virCapabilitiesFormatXML.
Only three other callers possibly call closedir on a NULL argument.
Even though these probably won't be used on FreeBSD where this crashes,
let's be nice and only call closedir on an actual directory stream.
4d06af97d3 introduced a possible memory
leak of the memory allocated into the "cpu" pointer in
parallelsBuildCapabilities in the case "nodeGetInfo()" would fail right
after the allocation. Rearrange the code to avoid the possibility of the
leak.
Found by Coverity.
A future patch wants to create disk definitions with non-zero
default contents; to avoid crashes, all callers that allocate
a disk definition should go through a common point.
I found allocation points by looking for any code that increments
ndisks, as well as any matches for ALLOC.*disk. Most places that
modified ndisks were covered by the parse from XML to domain/device
definition by initial domain creation or device hotplug; I also
hand-checked all drivers that generate a device struct on the
fly during getXMLDesc.
* src/conf/domain_conf.h (virDomainDiskDefNew): New prototype.
* src/conf/domain_conf.c (virDomainDiskDefNew): New function.
(virDomainDiskDefParseXML): Use it.
* src/parallels/parallels_driver.c (parallelsAddHddInfo):
Likewise.
* src/qemu/qemu_command.c (qemuParseCommandLine): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc): Likewise.
* src/vmx/vmx.c (virVMXParseDisk): Likewise.
* src/xenxs/xen_sxpr.c (xenParseSxprDisks, xenParseSxpr):
Likewise.
* src/xenxs/xen_xm.c (xenParseXM): Likewise.
* src/libvirt_private.syms (domain_conf.h): Export it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Openstack uses (or will start to using) CPU info from the
capabilities XML. So this section is expanded, added CPU info
about arch, type and info about number of cores, sockets and threads.
Signed-off-by: Eric Blake <eblake@redhat.com>
OpenStack Nova requires this function
to start VM instance. Cpumask info is obtained via prlctl utility.
Unlike KVM, Parallels Cloud Server is unable to set cpu affinity
mask for every VCpu. Mask is unique for all VCpu. You can set it
using 'prlctl set <vm_id|vm_name> --cpumask <{n[,n,n1-n2]|all}>'
command. For example, 'prlctl set SomeDomain --cpumask 0,1,5-7'
would set this mask to yy---yyy.
Signed-off-by: Eric Blake <eblake@redhat.com>
Each VM consists of a set of files in PCS: config, hard
disk images, log file, memory dump. All these files are stored
in a per-vm directory. When we create a new VM, we can ether specify
path to the VM or create the VM in a default path
(<default path>/<vm name>.pvm). This default path can be configured
with command
prlsrvctl user set --def-vm-home <path> command.
Currenty parallels driver creates VM in the same place, where first
hard disk is located. Let's change this logic and create VMs in
the default path. It will be much clearer and allow us to create
VMs without hard disks.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Disks support in this driver was implemented with an assumption,
that disk images can't be created by hand, without VM. So
complex storage driver was implemented with workaround.
This is not true, we can create new disks using ploop tool.
So the first step to reimplement disks support in parallels
driver is to do not use information from the storage driver,
until we will implement VIR_STORAGE_TYPE_VOLUME disks.
So after this patch disks can be added in the same way as
in any other driver: you create a disk image and then add
an entry to the XML definition of the domain with path to that
image file, for example:
<disk type='file' device='disk'>
<driver type='ploop'/>
<source file='/storage/harddisk1.hdd'/>
<target dev='sda' bus='sata'/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
This patch makes parallels storage driver useless, but I'll fix it
later. Now you can create an image by hand, using ploop tool,
and then add it to some domain.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Set file format in virDomainDef structure to produce correct
XML in virDomainGetXMLDesc function.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Add functions parallelsIsAlive, parallelsIsEncrypted,
parallelsIsSecure which are very simple to implement, but
may be required by some libvirt users. Almost all other
drivers have these functions.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
There is a problem with function parallelsDomainDefineXML. If we
are defining a new domain, then we need to do 2 things: aclually
create a VM in PCS and add new domain to the cached list of domains
_parallelsConn.domains.
This is done in the function parallelsLoadDomains. So call to
virDomainObjListAdd will return a error, because a domain
with the same name and id will already be in the list.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
I added this code year ago, instead of implementing ability
to change VNC configuration, which was not trivial, I added
extra call to prlctl, which sets up VNC with auto port, despite
VNC configuration given by a user.
Let's remove this hack, because, first, it doesn't work on the
latest Parallels Cloud Server release (you have to either specify
--vnc-nopasswd option or password). And also has problem with
error handling. If second call to prlctl fails, VM, created by
first call to prlctl, will not be removed.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
virDomainDef.features became an array, so now we can't simply
compare one features variable to another. We need to compare
each each element from the array.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Convert all remaining clients of readdir to use the new
interface, so that we can ensure (unlikely) errors while
reading a directory are reported.
* src/openvz/openvz_conf.c (openvzAssignUUIDs): Use new
interface.
* src/parallels/parallels_storage.c (parallelsFindVolumes)
(parallelsFindVmVolumes): Report readdir failures.
* src/qemu/qemu_driver.c (qemuDomainSnapshotLoad): Ignore readdir
failures.
* src/secret/secret_driver.c (loadSecrets): Likewise.
* src/qemu/qemu_hostdev.c
(qemuHostdevHostSupportsPassthroughVFIO): Report readdir failures.
* src/xen/xen_inotify.c (xenInotifyOpen): Likewise.
* src/xen/xm_internal.c (xenXMConfigCacheRefresh): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Experimentation showed that if virNetworkCreateXML() was called for a
network that was already defined, and then the network was
subsequently shutdown, the network would continue to be persistent
after the shutdown (expected/desired), but the original config would
be lost in favor of the transient config sent in with
virNetworkCreateXML() (which would then be the new persistent config)
(obviously unexpected/not desired).
To fix this, virNetworkObjAssignDef() has been changed to
1) properly save/free network->def and network->newDef for all the
various combinations of live/active/persistent, including some
combinations that were previously considered to be an error but didn't
need to be (e.g. setting a "live" config for a network that isn't yet
active but soon will be - that was previously considered an error,
even though in practice it can be very useful).
2) automatically set the persistent flag whenever a new non-live
config is assigned to the network (and clear it when the non-live
config is set to NULL). the libvirt network driver no longer directly
manipulates network->persistent, but instead relies entirely on
virNetworkObjAssignDef() to do the right thing automatically.
After this patch, the following sequence will behave as expected:
virNetworkDefineXML(X)
virNetworkCreateXML(X') (same name but some config different)
virNetworkDestroy(X)
At the end of these calls, the network config will remain as it was
after the initial virNetworkDefine(), whereas previously it would take
on the changes given during virNetworkCreateXML().
Another effect of this tighter coupling between a) setting a !live def
and b) setting/clearing the "persistent" flag, is that future patches
which change the details of network lifecycle management
(e.g. upcoming patches to fix detection of "active" networks when
libvirtd is restarted) will find it much more difficult to break
persistence functionality.
One of the features of qcow2 is that a wrapper file can have
more capacity than its backing file from the guest's perspective;
what's more, sparse files make tracking allocation of both
the active and backing file worthwhile. As such, it makes
more sense to show allocation numbers for each file in a chain,
and not just the top-level file. This sets up the fields for
the tracking, although it does not modify XML to display any
new information.
* src/util/virstoragefile.h (_virStorageSource): Add fields.
* src/conf/storage_conf.h (_virStorageVolDef): Drop redundant
fields.
* src/storage/storage_backend.c (virStorageBackendCreateBlockFrom)
(createRawFile, virStorageBackendCreateQemuImgCmd)
(virStorageBackendCreateQcowCreate): Update clients.
* src/storage/storage_driver.c (storageVolDelete)
(storageVolCreateXML, storageVolCreateXMLFrom, storageVolResize)
(storageVolWipeInternal, storageVolGetInfo): Likewise.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget)
(virStorageBackendFileSystemRefresh)
(virStorageBackendFileSystemVolResize)
(virStorageBackendFileSystemVolRefresh): Likewise.
* src/storage/storage_backend_logical.c
(virStorageBackendLogicalMakeVol)
(virStorageBackendLogicalCreateVol): Likewise.
* src/storage/storage_backend_scsi.c
(virStorageBackendSCSINewLun): Likewise.
* src/storage/storage_backend_mpath.c
(virStorageBackendMpathNewVol): Likewise.
* src/storage/storage_backend_rbd.c
(volStorageBackendRBDRefreshVolInfo)
(virStorageBackendRBDCreateImage): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskMakeDataVol)
(virStorageBackendDiskCreateVol): Likewise.
* src/storage/storage_backend_sheepdog.c
(virStorageBackendSheepdogBuildVol)
(virStorageBackendSheepdogParseVdiList): Likewise.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Likewise.
* src/conf/storage_conf.c (virStorageVolDefFormat)
(virStorageVolDefParseXML): Likewise.
* src/test/test_driver.c (testOpenVolumesForPool)
(testStorageVolCreateXML, testStorageVolCreateXMLFrom)
(testStorageVolDelete, testStorageVolGetInfo): Likewise.
* src/esx/esx_storage_backend_iscsi.c (esxStorageVolGetXMLDesc):
Likewise.
* src/esx/esx_storage_backend_vmfs.c (esxStorageVolGetXMLDesc)
(esxStorageVolCreateXML): Likewise.
* src/parallels/parallels_driver.c (parallelsAddHddByVolume):
Likewise.
* src/parallels/parallels_storage.c (parallelsDiskDescParseNode)
(parallelsStorageVolDefineXML, parallelsStorageVolCreateXMLFrom)
(parallelsStorageVolDefRemove, parallelsStorageVolGetInfo):
Likewise.
* src/vbox/vbox_tmpl.c (vboxStorageVolCreateXML)
(vboxStorageVolGetXMLDesc): Likewise.
* tests/storagebackendsheepdogtest.c (test_vdi_list_parser):
Likewise.
* src/phyp/phyp_driver.c (phypStorageVolCreateXML): Likewise.
Currently, <cputune><shares>0</shares></cputune> is treated
as if it were not specified.
Treat is as a valid value if it was explicitly specified
and write it to the cgroups.
Part of a series of cleanups to use new accessor methods.
* src/parallels/parallels_driver.c (parallelsGetHddInfo)
(parallelsAddHdd, parallelsApplyDisksParams, parallelsCreateVm):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
