There's been a report on the upstream list [1] describing we
access /sys/devices/system/cpu/present directly on the host from
within our test suite. This may end up in unpredictable results
as no all linux systems are required to have that file. Mock
access to the file.
libvirt.git/tests $ ../run strace vircgrouptest
...
access("/sys/devices/system/cpu/present", F_OK) = 0
...
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Yet again, selinux has been adding const-correctness; this change
is ABI-compatible, but breaks API, which affects us when we try to
override things in our testsuite:
../../tests/securityselinuxhelper.c:307:24: error: conflicting types for 'selabel_open'
struct selabel_handle *selabel_open(unsigned int backend,
^~~~~~~~~~~~
In file included from ../../tests/securityselinuxhelper.c:32:0:
/usr/include/selinux/label.h:73:24: note: previous declaration of 'selabel_open' was here
The problem is a new 'const' prior to the second parameter.
Fix it the same way we did in commit 292d3f2d: check for the new
const at configure time.
Signed-off-by: Eric Blake <eblake@redhat.com>
Introduce support for domainInterfaceStats API call for querying
network interface statistics. Consequently it also enables the use of
`virsh domifstat <dom> <interface name>` command plus seeing the
interfaces names instead of "-" when doing `virsh domiflist <dom>`.
After successful guest creation we fill the network interfaces names
based on domain, device id and append suffix if it's emulated in the
following form: vif<domid>.<devid>[-emu]. We extract the network
interfaces info from the libxl_domain_config object in
libxlDomainCreateIfaceNames() to generate ifname. On domain cleanup we
also clear ifname, in case it was set by libvirt (i.e. being prefixed
with "vif"). We also skip these two steps in case the name of the
interface was manually inserted by the administrator. Since the
introduction of netprefix (commit a040ba9), ifnames with a registered
prefix will be freed on virDomain{Obj,Def}Format*, thus eliminating
the migration issues observed with the reverted commit d2e5538 whereas
source and destination would have the same ifname.
For getting the interface statistics we resort to virNetInterfaceStats
and let libvirt handle the platform specific nits. Note that the
latter is not yet supported in FreeBSD.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
%zu is not always synonymous with uint64_t; on 32-bit machines,
size_t is only 32 bits. Prefer "%lld"/'unsigned long long' when
the variable is under our control, and "%"PRIu64 when we are
stuck with 'uint64_t' from RBD.
Fixes errors such as:
../../src/storage/storage_backend_rbd.c: In function 'virStorageBackendRBDVolWipe':
../../src/storage/storage_backend_rbd.c:1281:15: error: format '%zu' expects argument of type 'size_t', but argument 8 has type 'uint64_t {aka long long unsigned int}' [-Werror=format=]
VIR_DEBUG("Need to wipe %zu bytes from RBD image %s/%s",
^
../../src/util/virlog.h:90:73: note: in definition of macro 'VIR_DEBUG_INT'
virLogMessage(src, VIR_LOG_DEBUG, filename, linenr, funcname, NULL, __VA_ARGS__)
^
../../src/storage/storage_backend_rbd.c:1281:5: note: in expansion of macro 'VIR_DEBUG'
VIR_DEBUG("Need to wipe %zu bytes from RBD image %s/%s",
^
Signed-off-by: Eric Blake <eblake@redhat.com>
There's this check when building command line that whenever
domain has no graphics card configured we put -nographics onto
qemu command line. The check is 'if (!def->graphics)'. This
makes coverity think that def->graphics can be NULL, which is
true. But later in the code every access to def->graphics is
guarded by check for def->ngraphics, so no crash occurs. But this
is something that coverity fails to deduct.
In order to shut coverity up lets change the condition to
'if (!def->ngraphics)'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After 6604a3dd9f in which new helper function has been
introduced, the code calls virStringReplace and dereference the
result immediately. The string function can, however, return NULL
so this would SIGSEGV right away. Check for the return value of
the string function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After 457ff97fa there are two defects in our code. In both of
them we use a signed variable to hold up a number of snapshots
that domain has. We use a helper function to count the number.
However, the helper function may fail in which case it returns
a negative one and control jumps to cleanup label where an
unsigned variable is used to iterate over array of snapshots. The
loop condition thus compare signed and unsigned variables which
in this specific case ends up badly for us.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Imagine you have partially installed libvirt, or maybe you're
just running 'make uninstall' from a different version than 'make
install' has been ran. One way or another, we are doing plain
'rm' instead of 'rm -f' and thus not trying hard enough when
uninstalling. In the rest of our code we stick with -f switch. Do
that for docs too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
xl/libxl already supports qemu's network-based block backends
such as nbd and rbd. libvirt has supported configuring such
<disk>s for long time too. This patch adds support for rbd
disks in the libxl driver by generating a rbd device URL from
the virDomainDiskDef object. The URL is passed to libxl via the
pdev_path field of libxl_device_disk struct. libxl then passes
the URL to qemu for cosumption by the rbd backend.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The target= setting in xl disk configuration can be used to encode
meta info that is meaningful to a backend. Leverage this fact to
support qdisk network disk types such as rbd. E.g. <disk> config
such as
<disk type='network' device='disk'>
<driver name='qemu' type='raw'/>
<source protocol='rbd' name='pool/image'>
<host name='mon1.example.org' port='6321'/>
<host name='mon2.example.org' port='6322'/>
<host name='mon3.example.org' port='6322'/>
</source>
<target dev='hdb' bus='ide'/>
<address type='drive' controller='0' bus='0' target='0' unit='1'/>
</disk>
can be converted to the following xl config (and vice versa)
disk = [ "format=raw,vdev=hdb,access=rw,backendtype=qdisk,
target=rbd:pool/image:auth_supported=none:mon_host=mon1.example.org\\:6321\\;mon2.example.org\\:6322\\;mon3.example.org\\:6322"
]
Note that in xl disk config, a literal backslash in target= must
be escaped with a backslash. Conversion of <auth> config is not
handled in this patch, but can be done in a follow-up patch.
Also add a test for the conversions.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The most formal form of xl disk configuration uses key=value
syntax to define each configuration item, e.g.
format=raw, vdev=xvda, access=rw, backendtype=phy, target=disksrc
Change the xl disk formatter to produce this syntax, which allows
target= to contain meta info needed to setup a network-based
disksrc (e.g. rbd, nbd, iscsi). For details on xl disk config
format, see $xen-src/docs/misc/xl-disk-configuration.txt
Update the disk config in the tests to use the formal syntax.
But add tests to ensure disks specified with the positional
parameter syntax are correctly converted to <disk> XML.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Since we have the macro there's no need for us to unwind it by
hand and check for mutually exclusive flags ourselves.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We have macros that check and reject mutually exclusive
parameters to our commands. Use those instead of if-else tree.
At the same time, the variable @current becomes useless therefore
it is dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
It may be useful in some cases to call TristateSwitch helper with TristateBool.
Document that enum values equivalency in the code.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
In case you will specify graphics like this:
<graphics type='spice' port='-1'/>
or
<graphics type='spice' port='-1' tlsPort='6000'/>
libvirt will automatically add autoport='no'. This leads to an issue
that in qemuProcessStop() we don't release that port because we are
releasing both port if autoport=yes or only port marked as reserved.
If autoport=no but we request to generate port via '-1' we need to mark
that port as reserved in order to release it.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1299696
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Checking whether x > 0 before looping over [0..x] items doesn't make
sense and multi-line body must have curly brackets around it.
Best viewed with '-w'.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This does nothing more than adding the new device and capability.
The device is present since QEMU 2.6.0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There's a check if a domain definition has any graphics card and
if so, we iterate over each one of them. This makes no sense,
because even if it has none we can still iterate over.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When getting a list of servers registered for a daemon, it's
returned as a dynamically allocated array filled in with pointers
to constant strings. Because the array is dynamic, it should be
freed when no longer needed (but not the strings!). Even the
function that creates the array suggests that.
==19446== 48 bytes in 3 blocks are definitely lost in loss record 821 of 1,034
==19446== at 0x4C2C28E: realloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==19446== by 0x54BAFC8: virReallocN (viralloc.c:245)
==19446== by 0x54BB0BE: virExpandN (viralloc.c:294)
==19446== by 0x54BB391: virInsertElementsN (viralloc.c:436)
==19446== by 0x164E3D: virNetDaemonGetServerNames (virnetdaemon.c:217)
==19446== by 0x15616F: adminDaemonListServers (admin_server.c:52)
==19446== by 0x155B8C: adminDispatchConnectListServers (admin.c:151)
==19446== by 0x155FD8: adminDispatchConnectListServersHelper (admin_dispatch.h:101)
==19446== by 0x568E862: virNetServerProgramDispatchCall (virnetserverprogram.c:437)
==19446== by 0x568E3C3: virNetServerProgramDispatch (virnetserverprogram.c:307)
==19446== by 0x5687B5B: virNetServerProcessMsg (virnetserver.c:135)
==19446== by 0x5687C1B: virNetServerHandleJob (virnetserver.c:156)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
GIC v2 is the default, but checking against that specific version when
we want to know whether the default has been selected is potentially
error prone; using an alias instead makes it safer.
Recent changes to the handling of GIC version, specifically commit
2a7b11eafb, have clearly defined what values are acceptable for the
version attribute of the <gic> element. Update the documentation
accordingly.
Similarly to VM startup always set the legacy affinity. Additionally we
don't need to report an explicit error since virProcessSetAffinity
reports them themselves.
Similarly to VM startup always set the legacy affinity. Additionally we
don't need to report an explicit error since virProcessSetAffinity
reports them themselves.
PostParse handles it for us now.
This causes some test suite churn; qemu's custom PostParse could is
now invoked before the generic AddImplicitControllers, so PCI
controllers end up sequentially in the XML before the generically
added IDE controllers. So it's just some XML reordering
Seems like the natural fit, since we are already adding other XML bits
in the PostParse routine.
Previously AddImplicitControllers was only called at the end of XML
parsing, meaning code that builds a DomainDef by hand had to manually
call it. Now those PostParse callers get it for free.
There's some test churn here; xen xm and sexpr test suite bits weren't
calling this before, but now they are, so you'll see new IDE controllers.
I don't think this will cause problems in practice, since the code already
needs to handle these implicit controllers like in the case when a user
defines their own XML.
virDomainObjWait is designed to be called in a loop. Make sure we break
the loop in case the domain dies to avoid waiting for an event which
will never happen.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Calling qemuProcessStop without a job opens a way to race conditions
with qemuDomainObjExitMonitor called in another thread. A real world
example of such a race condition:
- migration thread (A) calls qemuMigrationWaitForSpice
- another thread (B) starts processing qemuDomainAbortJob API
- thread B signals thread A via qemuDomainObjAbortAsyncJob
- thread B enters monitor (qemuDomainObjEnterMonitor)
- thread B calls qemuMonitorSend
- thread A awakens and calls qemuProcessStop
- thread A calls qemuMonitorClose and sets priv->mon to NULL
- thread B calls qemuDomainObjExitMonitor with priv->mon == NULL
=> monitor stays ref'ed and locked
Depending on how lucky we are, the race may result in a memory leak or
it can even deadlock libvirtd's event loop if it tries to lock the
monitor to process an event received before qemuMonitorClose was called.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Stopping a domain without a job risks a race condition with another
thread which started a job a which does not expect anyone else to be
messing around with the same domain object.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Only a small portion of processGuestPanicEvent was enclosed within a
job, let's make sure we use the job for all operations to avoid race
conditions.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When destroying a domain we need to make sure we will be able to start a
job no matter what other operations are running or even stuck in a job.
This is done by killing the domain before starting the destroy job.
Let's introduce qemuProcessBeginStopJob which combines killing a domain
and starting a job in a single API which can be called everywhere we
need a job to stop a domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Ending a nested job is no different from ending any other (non-async)
job, after all the code in qemuDomainBeginJobInternal does not handle
them differently either. Thus we should call qemuDomainObjEndJob to stop
nested jobs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuDomainHelperGetVcpus would correctly return an array of
virVcpuInfoPtr structs for online vcpus even for sparse topologies, but
the loop that fills the returned typed parameters would number the vcpus
incorrectly. Fortunately sparse topologies aren't supported yet.
Rather than setting flags to -1 if none were specified, move the logic
to use the old API to the place where we need to decide. It simplifies
the logic a bit.
