When a VM is being migrated to a destination host it can be made
persistent on the destination by using VIR_MIGRATE_PERSIST_DEST. That
may not work as intended if VIR_MIGRATE_PARAM_DEST_XML or the 'xmlin'
parameter is used as that allows overriding certain aspects of the VM
xml, but does not involve the persistent definition.
In most cases users will need to supply also VIR_MIGRATE_PARAM_PERSIST_XML
with the same set of modification.
Modify the man page to clarify the above so that users don't end up with
broken VM after migrating and restarting it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The migration parameter causes zero detection to be enabled and zero
blocks are *not* transferred to the destination. This means that users
must provide pre-cleared images that read all zero, otherwise the
non-zero blocks on destination which reside in places where the source
has zero blocks would be kept intact corrupting the image.
As not transferring and overwriting the zero blocks is what the feature
is supposed to do the users need to provide the proper environment.
Document the requirement, both in API and in the virsh man page for the
'--migrate-disks-detect-zeroes' option.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The new 'VIR_MIGRATE_PARAM_MIGRATE_DISKS_DETECT_ZEROES' migration
parameter allows users of migration to pass in a list of disks where
zero-detection (which avoids transferring the zeroed-blocks) should be
enabled for the migration connection. This comes at the cost of extra
CPU cycles needed to check each block if it's all-zero.
This is useful for storage backends where information about the
allocation state of a block is not available and thus without this the
image would become fully allocated on the destination.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
As of now, libvirt supports few essential stats as
part of virDomainGetJobStats for Live Migration such
as memory transferred, dirty rate, number of iteration
etc. Currently it does not have support for the vfio
stats returned via QEMU. This patch adds support for that.
Signed-off-by: Kshitij Jha <kshitij.jha@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The new virDomainGraphicsReload API is used to make the domain reload
its certificates without restart, and avoid service interruption.
Currently, only QEMU VNC TLS certificates are supported, but
flags are also reserved for subsequent scenarios.
To reload QEMU VNC TLS certificates as an example, we can call:
virDomainGraphicsReload(domain, 0, 0);
Then the specified QMP message would be send to QEMU:
{"execute": "display-reload", "arguments":{"type": "vnc", "tls-certs": true}}
Signed-off-by: Zheng Yan <yanzheng759@huawei.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
A public API method which allows to update or modify objects is
implemented for almost all other objects that have a concept of
persistent definition and activatability. Currently node devices of type
mdev can be persistent and active. This new method allows to update
defined and active node devices as well.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow to filter node devices based on their persistent or transient
states.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The configuration of a defined mdev can be modified after the mdev is
started. The defined configuration and the active configuration can
therefore run out of sync. Handle this by storing the modifiable data
which is the mdev type and attributes in two separate active and
defined configurations. mdevctl supports with callout scripts to do an
attribute retrieval of started mdevs which is already implemented in
libvirt.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow users to easily resize 'raw' images on block devices to the full
capacity of the block device. Obviously this won't work on file-backed
storage (filling the remaining capacity is most likely wrong) or for
formats with metadata due to the overhead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When changing the metadata via virNetworkSetMetadata(), we can
now emit an event to notify the app of changes. This is useful
when co-ordinating different applications read/write of custom
metadata.
Signed-off-by: K Shiva Kiran <shiva_kr@riseup.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch introduces public Get and Set APIs for modifying <title>,
<description> and <metadata> elements of the Network object.
- Added enum virNetworkMetadataType to select one of the above
elements to operate on.
- Added error code and messages for missing metadata.
- Added public API implementation.
- Added driver support.
Signed-off-by: K Shiva Kiran <shiva_kr@riseup.net>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In v9.3.0-98-g150ae3e62b two new macros were introduced:
VIR_MIGRATE_PARAM_COMPRESSION_ZLIB_LEVEL and
VIR_MIGRATE_PARAM_COMPRESSION_ZSTD_LEVEL. But both list 9.1.0 as
the version they were introduced in (this is because the patch
was sent in that release time frame). Change the version to the
current release.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
I was approached by a KubeVirt developer to clarify what value
does VIR_DOMAIN_MEMORY_STAT_DISK_CACHES report, whether it's from
the guest or the host POV. And since I didn't know the answer
even after reading the docs I think we can do better. Clarify the
POV then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add description for VIR_MIGRATE_PARAM_COMPRESSION, it will
be reused in choosing compression method during parallel migration.
Add public API VIR_MIGRATE_PARAM_COMPRESSION_ZLIB_LEVEL,
VIR_MIGRATE_PARAM_COMPRESSION_ZSTD_LEVEL for migration APIs
to support set compress level during parallel migration.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Convert the internal types to unsigned long long. Luckily we can also
covert the external types too:
- 'qemuDomainSetIOThreadParams' can accept both _UINT and _ULLONG by
converting to 'virTypedParamsGetUnsigned'
- querying is handled via the bulk stats API which is flexible:
- we use virTypedParamListAddUnsigned to use the bigger type only if
necessary
- most users don't even notice because the bindings abstract the
data types
Apart from the code modifications we also improve the documentation
which was missing for the setters.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some APIs (migration, save/restore, snapshot, ...) require a domain to
be suspended temporarily. In case resuming the domain fails, the domain
will be unexpectedly left paused when the API finishes. This situation
is reported via VIR_DOMAIN_EVENT_SUSPENDED event with
VIR_DOMAIN_EVENT_SUSPENDED_API_ERROR detail. But we do not have a
corresponding reason for VIR_DOMAIN_PAUSED state and the reason would
remain set to the value used when the domain was paused. So the state
reason would suggest the operation is still running.
This patch changes the state reason to a new VIR_DOMAIN_PAUSED_API_ERROR
to make it clear the API that paused the domain already finished, but
failed to resume the domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The API can be used to associate one or more (e.g. a RO and RW fd for a
disk backend image) FDs to a VM. They can be then used per definition.
The primary use case for now is for complex deployment where
libvirtd/virtqemud may be run inside a container and getting the image
into the container is complicated.
In the future it will also allow passing e.g. vhost FDs and other
resources to a VM without the need to have a filesystem representation
for it.
Passing raw FDs has few intricacies and thus libvirt will by default not
restore security labels.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Allow users to request validation of the storage volume XML. Add new
flag and virsh support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The node device APIs which get XML from the user don't yet support XML
validation flags. Introduce virNodeDeviceCreateXMLFlags and
virNodeDeviceDefineXMLFlags with the appropriate flags and add virsh
support for the new flags.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
This patch adds a new worker qemuDomainGetStatsVm which reports the
stats returned by "query-stats" via qemuMonitorQueryStats for the VM
target.
Signed-off-by: Amneesh Singh <natto@weirdnatto.in>
Add UNDEFINE_TPM and UNDEFINE_KEEP_TPM flags to qemuDomainUndefineFlags()
API and --tpm and --keep-tpm to 'virsh undefine'. Pass the
virDomainUndefineFlagsValues via qemuDomainRemoveInactive()
from qemuDomainUndefineFlags() all the way down to
qemuTPMEmulatorCleanupHost() and delete TPM storage there considering that
the UNDEFINE_TPM flag has priority over the persistent_state attribute
from the domain XML. Pass 0 in all other API call sites to
qemuDomainRemoveInactive() for now.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use of the admin APIs to modify logging temporarily has a rather serious
deficiency when the daemon whose config is being changed is using
auto-shutdown (default with socket-activated deployments) as the
configuration is discarded if there is no client or VM/other object
blocking auto shutdown.
This API allows users to disable/postpone shutdown timeout so that the
configuration doesn't change under their hands.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When introducing VIR_DOMAIN_IOTHREAD_THREAD_POOL_MIN and
VIR_DOMAIN_IOTHREAD_THREAD_POOL_MAX typed parameters, I've made a
shortcut. Since at the monitor level these two are set in two
separate calls and minimum has to be always smaller than maximum
(or equal to it), it may happen that one of the values we want to
set violates this restriction. So I've put a little note in the
public API description warning users about this.
However, the proper solution is to have a logic that checks the
current values and based on that set either minimum or maximum
value first. But until we get there, remove that note from the
public API before it gets released.
Related: https://gitlab.com/libvirt/libvirt/-/issues/339
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The flag can be used to enable zero-copy mechanism for migrating memory
pages.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our public API offers virDomainSetIOThreadParams() function which
allows users to set various aspects of IOThreads. Introduce two
new typed parameters: VIR_DOMAIN_IOTHREAD_THREAD_POOL_MIN and
VIR_DOMAIN_IOTHREAD_THREAD_POOL_MAX which will allow users to
modify the thread-pool-min and thread-pool-max attributes of an
iothread.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The original virDomainAbortJob did not support flags.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This flag can be used to restart post-copy migration once it failed
because of a broken connection.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This new "post-copy failed" reason for the running state will be used on
the destination host when post-copy migration fails while the domain is
already running there.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
A few commits ago new APIs were introduced (virDomainSaveParams()
and virDomainRestoreParams()) and with them new typed parameters:
VIR_SAVE_PARAM_FILE and VIR_SAVE_PARAM_DXML. But their name does
not suggest they apply to either of the APIs nor that they are
intended for domain related APIs. Switch to
VIR_DOMAIN_SAVE_PARAM prefix to make it obvious.
It's true we already have VIR_DOMAIN_SAVE_* symbols which are
part of virDomainSaveRestoreFlags enum, therefore stick also with
'_PARAM_ ' part of the name to differentiate the two.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
add new API in order to be able to extend parameters to the domain
restore operation. We will use it to fit the existing arguments of
VirDomainRestoreFlags for now.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
create an alternative to virDomainSaveFlags that is more
extendible via parameters.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It allows libvirt to provide the value of cpu0-id retuned by the Qemu QMP
command query-sev-capabilities as implemented by the Qemu Patch [1] which
is merged to Qemu master branch and should be available with Qemu 7.1.
This is used to get the signed Chip Endorsement Key (CEK) of the CPU of AMD
system from AMD's Key Distribution Service (KDS).
Similar to cbitpos, reducedPhysBits, maxGuests & maxESGuests;
the value of cpu0-id is also provided using 'virsh domcapability'.
[1] https://lore.kernel.org/all/20220228093014.882288-1-dovmurik@linux.ibm.com/
Signed-off-by: Niteesh Dubey <niteesh@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It belongs to the comment for VIR_DOMAIN_AFFECT_CONFIG, not to
the unrelated one immediately after it.
Fixes: 807cdbf759
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Either create or append to existing docstring, the version (git tag)
that a given function was introduced in the format:
Since: v1.2.3
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Either create or append to existing docstring, the version (git tag)
that a given function was introduced in the format:
Since: v1.2.3
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Either create or append to existing docstring, the version (git tag)
that a given typedef was introduced in the format:
Since: v1.2.3
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Either create or append to existing docstring, the version (git tag)
that a given macro was introduced in the format:
Since: v1.2.3
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Either create or append to existing docstring, the version (git tag)
that a given enum value was introduced in the format:
Since: v1.2.3
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Either create or append to existing docstring, the version (git tag)
that a given enum value was introduced in the format:
Since: v1.2.3
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Follow up patch will add Since metadata to enum values of
virStorageVolWipeAlgorithm.
This patch is necessary to avoid breaking the build with
syntax-check.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
