In case when we are testing a QMP command we can try to schema check it
so that we catch inconsistencies.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This configuration can be used by gitdm to generate reports about
libvirt development.
The goal I was working with was being able to generate a report
for every single libvirt release and having zero "email address
as company" entries; picking different commit ranges might result
in some contributions not being accounted for.
I had to make some judgement calls when the situation was not
entirely clear-cut: when in doubt, and not finding any obvious
signs of the opposite being true, I mostly ended up dumping
people in the "unaffiliated contributions" bin. If I got it
wrong, and companies want to get recognition for their sponsored
contributions to libvirt, they can send patches.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fabiano Fidencio was working for Red Hat when he contributed to
libvirt, Shi Lei's non-company email address contains the company
name so it's fair to assume contributions using it were made on
company time, and Adrian Brzezinski's personal email was used
for the S-o-b while the git authorship information clearly pointed
at the company being involved.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Validate @keycodes before successfully returning. Since this is test
driver, @holdtime is being unused here.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Commit 2f2254c7f4 attempted to fix a memory leak by ensuring
cpumapToSet is always a freshly allocated bitmap, but regrettably
introduced a NULL pointer access while doing so, because it called
virBitmapCopy() without allocating the destination bitmap first.
Solve the issue by using virBitmapNewCopy() instead.
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The flag causes undefine to fail if trying to remove a non-RBD disk. Add
a warning about that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
The old flag name confused some users into thinking it's the correct way
to undefine a VM with libvirt (not storage volume) snapshots.
The correct flag in that case is way less obvious: --snapshots-metadata.
Rename the flag (by adding an alias) to something which will promote
looking up the actual purpose of the flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Reword the end of the help string to make it more obvious that the VM
must be inactive.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Due to this bug the following command would fail on any host where TSC
frequency can be probed:
$ virsh capabilities | virsh cpu-baseline /dev/stdin
error: unsupported configuration: Invalid TSC frequency
https://bugzilla.redhat.com/show_bug.cgi?id=1641702
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's a premature optimization. It's perfectly acceptable for
'error' label to deal with @vm == NULL case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
We're using VIR_AUTOPTR() for everything now, plus the
cleanup section was not doing anything useful anyway.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In two out of three scenarios we are cleaning up properly after
ourselves, but commit 5f2212c062 has changed the remaining one
in a way that caused it to start leaking cpumapToSet.
Refactor the logic so that cpumapToSet is always a freshly
allocated bitmap that gets cleaned up automatically thanks to
VIR_AUTOPTR(); this also allows us to remove the hostcpumap
variable.
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Right now, if numad fails, we raise an error but return an
empty string to the caller instead of a NULL pointer, which
means processing will continue and the user will see
# virsh start guest
error: Failed to start domain guest
error: invalid argument: Failed to parse bitmap ''
instead of a more reasonable
# virsh start guest
error: Failed to start domain guest
error: operation failed: Failed to query numad for the advisory nodeset
Make sure the user gets a better error message.
https://bugzilla.redhat.com/show_bug.cgi?id=1716387
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Ever since the feature was introduced with commit 0f8e7ae33a,
it has contained a logic error in that it attempted to use a NUMA
node map where a CPU map was expected.
Because of that, guests using <numatune> might fail to start:
# virsh start guest
error: Failed to start domain guest
error: cannot set CPU affinity on process 40055: Invalid argument
This was particularly easy to trigger on POWER 8 machines, where
secondary threads always show up as offline in the host: having
<numatune>
<memory mode='strict' placement='static' nodeset='1'/>
</numatune>
in the guest configuration, for example, would result in libvirt
trying to set the process affinity so that it would prefer
running on CPU 1, but since that's a secondary thread and thus
shows up as offline, the operation would fail, and so would
starting the guest.
Use the newly introduced virNumaNodesetToCPUset() to convert the
NUMA node map to a CPU map, which in the example above would be
48,56,64,72,80,88 - a valid input for virProcessSetAffinity().
https://bugzilla.redhat.com/show_bug.cgi?id=1703661
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This helper converts a set of NUMA node to the set of CPUs
they contain.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This argument wasn't validated anywhere, neither in the generic
implementation nor in the individual drivers. As a result a call to this
function with a large enough codeset value prior to this change causes
libvirtd to crash.
This happens because all drivers call virKeycodeValueTranslate which
uses codeset as an index to the virKeymapValues array, causing an
out-of-bounds error.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When migrating a domain with invtsc CPU feature enabled, the TSC
frequency of the destination host must match the frequency used when the
domain was started on the source host or the destination host has to
support TSC scaling.
If the frequencies do not match and the destination host does not
support TSC scaling, QEMU will fail to set the right TSC frequency when
starting vCPUs on the destination and thus migration will fail. However,
this is quite late since both host might have spent significant time
transferring memory and perhaps even storage data.
By adding the check to libvirt we can let migration fail before any data
starts to be sent over. If for some reason libvirt is unable to detect
the host's TSC frequency or scaling support, we'll just let QEMU try and
the migration will either succeed or fail later.
Luckily, we mandate TSC frequency to be explicitly set in the domain XML
to even allow migration of domains with invtsc. We can just check
whether the requested frequency is compatible with the current host
before starting QEMU.
https://bugzilla.redhat.com/show_bug.cgi?id=1641702
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When the host CPU supports invariant TSC the host CPU definition created
by virCPUx86GetHost will contain (unless probing fails for some reason)
addition TSC related data.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit 0a97486e09 moved them outside #ifdef, but after virCPUx86GetHost,
which will start calling them in the following patch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This patch adds a new
<counter name='tsc' frequency='N' scaling='on|off'/>
element into the host CPU capabilities XML.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
On a KVM x86_64 host which supports invariant TSC this function can be
used to detect the TSC frequency and the availability of TSC scaling.
The magic MSR numbers required to check if VMX scaling is supported on
the host are documented in Volume 3 of the Intel® 64 and IA-32
Architectures Software Developer’s Manual.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The qemuTestParseCapabilitiesArch call would eventually lead to the host
CPU being probed via virCPUGetHost. Let's divert this to a mocked
version already used by the qemuxml2argvtest.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The function is renamed as virQEMUCapsProbeHostCPU and it does not get
the list of allowed CPU models from qemuCaps anymore. This is
responsibility is moved to the caller. The result is just a very thin
wrapper around virCPUGetHost mostly required mocking in tests.
The generic function is used in place of a direct call to virCPUGetHost
in virQEMUCapsInitHostCPUModel to make sure tests don't accidentally
probe host CPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1426162
Turns out, some aarch64 systems have SMBIOS info. That means we
can use dmidecode to fetch some information. If that fails, fall
back to the old behaviour.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There's nothing x86 specific about this function. Rename the
function so that it has DMI suffix which enables it to be reused
on different arches (as using X86 from say ARM would look
suspicious).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This test case uses (anonimized) data pulled from a
GIGABYTE R120-T34 server.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
We have a single mock dmidecode script right now, but we're
going to add another one soon, so we need to make sure its
name contains the test case name as a prefix, just like we
already do with all data files.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
All current IOMMU features are specific to Intel IOMMU, so
understandably we check for the corresponding capabilities
inside the Intel-specific switch() branch; however, we want
to make sure SMMUv3 IOMMU users get an error if they try to
enable any of those features in their guest, and performing
the capability checks unconditionally is both the easiest
way to achieve that, as well as the one least likely to
result in us inadvertently letting users enable some new
Intel-specific IOMMU feature for ARM guests later on.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
SMMUv3 is an IOMMU implementation for ARM virt guests.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This capability can be used to figure out whether the
QEMU binary at hand supports the machine type property
we need in order to enable SMMUv3 IOMMU support.
Unfortunately we can't avoid probing the RISC-V binaries
along with the ARM ones, since both architectures have
their own 'virt' machine type.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Current capability checks are specific to Intel IOMMU, so
we need to move them inside the switch() statement before
we can introduce more virDomainIOMMUModel values.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This doesn't make a whole lot of difference now, but once
we introduce more virDomainIOMMUModel values the current
structure will no longer work.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Ensure unexpected values are dealt with correctly, that
is by invoking virReportEnumRangeError() and immediately
returning a negative value to the caller.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All other examples are organized using the either the format/
or the format/category/ hierarchy already, and grouping all
C programs together removes the last remaining outliers.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Now that all C examples are neatly sorted into only three
categories, getting rid of our custom installation machinery
and replacing it with the standard autotools mechanism
finally becomes feasible.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Most C examples live in their own directory, which seems a
bit unnecessary especially considering that all virt-admin
related examples share a single admin/ directory. Reorganize
non-admin C examples in two categories: domain/ for those
that act on a domain, and misc/ for everything else.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
The virt-lxc-convert shell script is at this point the
only example we don't install on the target system.
Create a sh/ subdirectory, following the example set by
the existing polkit/, systemtap/ and xml/, and move the
script there; then add rules that will install all example
shell scripts as documentation.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Right now we install the files in RPMs only, and we include
them in the -daemon package which is probably not the best
option either. Start installing them via autotools; the RPMs
will get them automatically in the -docs package.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>