For the new VIR_DOMAIN_EVENT_ID_TUNABLE event we have a bunch of
constants added
VIR_DOMAIN_EVENT_CPUTUNE_<blah>
VIR_DOMAIN_EVENT_BLKDEVIOTUNE_<blah>
This naming convention is bad for two reasons
- There is no common prefix unique for the events to both
relate them, and distinguish them from other event
constants
- The values associated with the constants were chosen
to match the names used with virConnectGetAllDomainStats
so having EVENT in the constant name is not applicable in
that respect
This patch proposes renaming the constants to
VIR_DOMAIN_TUNABLE_CPU_<blah>
VIR_DOMAIN_TUNABLE_BLKDEV_<blah>
ie, given them a common VIR_DOMAIN_TUNABLE prefix.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=993411
On some systems (using libtirpc instead of glibc's
implementation), xdr_uint64_t exists rather under different name:
xdr_u_int64_t. This makes compilation fail then:
libvirt_lxc-lxc_monitor_protocol.o: In function `xdr_virLXCMonitorInitEventMsg':
/usr/local/src/libvirt/libvirt-1.1.1/src/./lxc/lxc_monitor_protocol.c:31: undefined reference to `xdr_uint64_t'
Therefore we rather mirror the d707c866 commit and redefine
xdr_uint64_t if needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
On a domain startup, the variable store path is generated if needed.
The path is intended to be generated only once. However, the updated
domain definition is not saved into config dir rather than state XML
only. So later, whenever the domain is destroyed and the daemon is
restarted, the generated path is forgotten and the file may be left
behind on virDomainUndefine() call.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's no one to free() it anyway. Instead, we can just pass the
provided array pointer directly.
==20039== 48 bytes in 4 blocks are definitely lost in loss record 658 of 787
==20039== at 0x4C2A700: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==20039== by 0x4EA661F: virAllocN (viralloc.c:191)
==20039== by 0x50386EF: remoteNodeGetFreePages (remote_driver.c:7625)
==20039== by 0x5003504: virNodeGetFreePages (libvirt.c:21379)
==20039== by 0x154625: cmdFreepages (virsh-host.c:374)
==20039== by 0x12F718: vshCommandRun (virsh.c:1935)
==20039== by 0x1339FB: main (virsh.c:3747)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since 363e9a68 we track backing chain metadata when creating snapshots
the right way even for the inactive configuration. As we did not yet
update other code paths that modify the backing chain (blockpull) the
newDef backing chain gets out of sync.
After stopping of a VM the new definition gets copied to the next start
one. The new VM then has incorrect backing chain info. This patch
switches the backing chain detector to always purge the existing backing
chain and forces re-detection to avoid this issue until we'll have full
backing chain tracking support.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1144922
Due to a missing check the API can be successfully called even if
the connection is ReadOnly. Fortunately, the API hasn't been
released yet, so there's no need for a CVE.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add files parallels_sdk.c and parallels_sdk.h for code
which works with SDK, so libvirt's code will not mix with
dealing with parallels SDK.
To use Parallels SDK you must first call PrlApi_InitEx function,
and then you will be able to connect to a server with
PrlSrv_LoginLocalEx function. When you've done you must call
PrlApi_Deinit. So let's call PrlApi_InitEx on first .connectOpen,
count number of connections and deinitialize, when this counter
becomes zero.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Executing prlctl command is not an optimal way to interact with
Parallels Cloud Server (PCS), it's better to use parallels SDK,
which is a remote API to paralles dispatcher service.
We prepared opensource version of this SDK and published it on
github, it's distributed under LGPL license. Here is a git repo:
https://github.com/Parallels/parallels-sdk.
To build with parallels SDK user should get compiler and linker
options from pkg-config 'parallels-sdk' file. So fix checks in
configure script and build with parallels SDK, if that pkg-config
file exists and add gcc options to makefile.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
We have these configuration knobs, like max_clients and
max_anonymous_clients. They limit the number of clients
connected. Whenever the limit is reached, the daemon stops
accepting new ones and resumes if one of the connected clients
disconnects. If that's the case, a debug message is printed into
the logs. And when the daemon starts over to accept new clients
too. However, the problem is the messages have debug priority.
This may be unfortunate, because if the daemon stops accepting
new clients all of a sudden, and users don't have debug logs
enabled they have no idea what's going on. Raise the messages
level to INFO at least.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The changes in commit c7542573 introduced possible segfault. Looking
deeper into the code and the original code before the patch series were
applied I think that we should report error for each function failure
and also we shouldn't call some of the function twice.
Found by coverity.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Use the universal tunable event to report changes to user. All
blkdeviotune values are prefixed with "blkdeviotune".
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When you updated some blkdeviotune values for running domain the values
were stored only internally, but not saved into the live XML so they
won't survive restarting the libvirtd.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The commit 1b854c76 introduced a new function 'virPolkitCheckAuth' and
in the #else section when you don't have polkit all attributes should be
follwed by ATTRIBUTE_UNUSED.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
It would be nice to also print a params pointer and number of params in
the debug message and the previous limit for number of params in the rpc
message was too large. The 2048 params will be enough for future events.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
A long time ago in a galaxy far, far away it has been decided
that libvirt will manage not only domains but host as well. And
with my latest work on qemu driver supporting huge pages, we miss
the cherry on top: an API to allocate huge pages on the run.
Currently users are forced to log into the host and adjust the
huge pages pool themselves. However, with this API the problem
is gone - they can both size up and size down the pool.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the previous patch I've changed the for loop bounds but forgot
to 'git add' changes that adapt the rest of the code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The check for ISCSI devices was missing a check of subsys type, which
meant we could skip labelling of other host devices as well. This fixes
USB hotplug on F21
https://bugzilla.redhat.com/show_bug.cgi?id=1145968
Spawning the pkcheck program every time a permission check is
required is hugely expensive on CPU. The pkcheck program is just
a dumb wrapper for the DBus API, so rewrite the code to use the
DBus API directly. This also simplifies error handling a bit.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert the remote daemon auth check and the access control
code to use the common polkit API for checking auth.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert virAccessDriverPolkitFormatProcess to use typesafe API
for getting process ID attribute.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update virNetServerClientCreateIdentity and virIdentityGetSystem
to use the new typesafe APIs for setting identity attributes
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are now two places in libvirt which use polkit. Currently
they use pkexec, which is set to be replaced by direct DBus API
calls. Add a common API which they will both be able to use for
this purpose.
No tests are added at this time, since the impl will be gutted
in favour of a DBus API call shortly.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add options for tuning segment offloading:
<driver>
<host csum='off' gso='off' tso4='off' tso6='off'
ecn='off' ufo='off'/>
<guest csum='off' tso4='off' tso6='off' ecn='off' ufo='off'/>
</driver>
which control the respective host_ and guest_ properties
of the virtio-net device.
In nodeGetFreePages, if startCell is given by '0',
and the max node number is '0' too. The for-loop
wouldn't be executed.
So convert it to while-loop.
Before:
> virsh freepages --cellno 0 --pagesize 4
error: internal error: no suitable info found
After:
> virsh freepages --cellno 0 --pagesize 4
4KiB: 472637
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If you have a bridge network in running domain and libvirtd is restarted
the information about host bridge interface is lost from live xml.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140085
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Request erroring out from the backing chain traveller and drop qemu's
internal backing chain integrity tester.
The backing chain traveller reports errors by itself with possibly more
detail than qemuDiskChainCheckBroken ever could.
We also need to make sure that we reconnect to existing qemu instances
even at the cost of losing the backing chain info (this really should be
stored in the XML rather than reloaded from disk, but that needs some
work).
Add a new parameter to virStorageFileGetMetadata that will break the
backing chain detection process and report useful error message rather
than having to use virStorageFileChainGetBroken.
This patch just introduces the option, usage will be provided
separately.
Now we have universal tunable event so we can use it for reporting
changes to user. The cputune values will be prefixed with "cputune" to
distinguish it from other tunable events.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This new event will use typedParameters to expose what has been actually
updated and the reason is that we can in the future extend any tunable
values or add new tunable values. With typedParameters we don't have to
worry about creating some other events, we will just use this universal
event to inform user about updates.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In the function at one place we check if def->cpu is NULL prior
to accessing def->cpu->ncells. Then, later in the code,
def->cpu->ncells is accessed directly, without the check. This
makes coverity unhappy, because the first check makes it think
def->cpu can be NULL. However, the function is not called if
def->cpu is NULL. Therefore, remove the first check and hopefully
make coverity cheer again.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Cleanup virDomanDef structure from other nested structure and create
separate type definition for them.
Fix a typo in virDomainHugePage.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
RDMA Live migration requires registering memory with the hardware, and
thus QEMU offers a new 'capability' to pre-register / mlock() the guest
memory in advance for higher RDMA performance before the migration
begins. This capability is disabled by default, which means QEMU will
register the memory with the hardware in an on-demand basis.
This patch exposes this capability with the following example usage:
virsh migrate --live --rdma-pin-all --migrateuri rdma://hostname domain qemu+ssh://hostname/system
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This patch adds support for RDMA protocol in migration URIs.
USAGE: $ virsh migrate --live --migrateuri rdma://hostname domain qemu+ssh://hostname/system
Since libvirt runs QEMU in a pretty restricted environment, several
files needs to be added to cgroup_device_acl (in qemu.conf) for QEMU to
be able to access the host's infiniband hardware. Full documenation of
the feature can be found on QEMU wiki:
http://wiki.qemu.org/Features/RDMALiveMigration
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Currently we only support TCP protocol for native QEMU migration but
this is going to be changed. Let's make the code more general and remove
hardcoded TCP protocol from several places.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
For compatibility with old libvirt we need to support both tcp:host and
tcp://host migration URIs. Let's make the code that parses them a bit
cleaner.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
RDMA migration uses the 'setup' state in QEMU to optionally lock
all memory before the migration starts. The total time spent in
this state is exposed as VIR_DOMAIN_JOB_SETUP_TIME.
Additionally, QEMU also exports migration throughput (mbps) for both
memory and disk, so let's add them too: VIR_DOMAIN_JOB_MEMORY_BPS,
VIR_DOMAIN_JOB_DISK_BPS.
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
commit 72f919f558 introduced an user
friendly error message when trying to use IDE disks as readonly.
Do the same thing for the SATA bus.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1112939
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Add a new parameter that will allow to return the XML stored in the save
image for further manipulation and adjust the callers. This option will
be used in later patches.
There is no need to acquire the driver-wide lock in
libxlDomainDefineXML. When switching to jobs in the libxl
driver, most driver-wide locks were removed. The locking here
was preserved since I mistakenly thought virDomainObjListAdd
needed protection. This is not the case, so remove the
unnecessary locking.
Commit id '9a2f36ec' added a build conditional of CAP_SYS_RAWIO
in order to determine whether or not a disk definition using rawio
should be allowed on platforms without CAP_SYS_RAWIO. If one was
found, virReportError was used but the code didn't goto cleanup.
This patch adds the goto.
We are not detecting the presence of FIPS from QEMU, but from procfs and
that means it's not QEMU capability. It was decided that we will pass
this flag to QEMU even if it's not supported by old QEMU binaries.
This patch also reverts changes done by commit a21cfb0f to
qemucapabilitestest and implements a new test case in qemuxml2argvtest.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1135431
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1141879
A long time ago I've implemented support for so called multiqueue
net. The idea was to let guest network traffic be processed by
multiple host CPUs and thus increasing performance. However, this
behavior is enabled by QEMU via special ioctl() iterated over the
all tap FDs passed in by libvirt. Unfortunately, SELinux comes in
and disallows the ioctl() call because the /dev/net/tun has label
system_u:object_r:tun_tap_device_t:s0 and 'attach_queue' ioctl()
is not allowed on tun_tap_device_t type. So after discussion with
a SELinux developer we've decided that the FDs passed to the QEMU
should be labelled with svirt_t type and SELinux policy will
allow the ioctl(). Therefore I've made a patch
(cf976d9dcf) that does exactly this. The patch
was fixed then by a443193139 and
b635b7a1af. However, things are not
that easy - even though the API to label FD is called
(fsetfilecon_raw) the underlying file is labelled too! So
effectively we are mangling /dev/net/tun label. Yes, that broke
dozen of other application from openvpn, or boxes, to qemu
running other domains.
The best solution would be if SELinux provides a way to label an
FD only, which could be then labeled when passed to the qemu.
However that's a long path to go and we should fix this
regression AQAP. So I went to talk to the SELinux developer again
and we agreed on temporary solution that:
1) All the three patches are reverted
2) SELinux temporarily allows 'attach_queue' on the
tun_tap_device_t
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
- Provide an implementation for buildPool and deletePool operations
for the ZFS storage backend.
- Add VIR_STORAGE_POOL_SOURCE_DEVICE flag to ZFS pool poolOptions
as now we can specify devices to build pool from
- storagepool.rng: add an optional 'sourceinfodev' to 'sourcezfs' and
add an optional 'target' to 'poolzfs' entity
- Add a couple of tests to storagepoolxml2xmltest
If the qemu being used doesn't support JSON, then querying for IOThread
data would fail. In that case, ensure the *iothreads is NULL and return 0
as the count of iothreads available.
Currently, build with clang fails with:
CC qemu/libvirt_driver_qemu_impl_la-qemu_command.lo
qemu/qemu_command.c:6580:58: error: implicit conversion from enumeration type
'virMemAccess' to different enumeration type 'virTristateSwitch'
[-Werror,-Wenum-conversion]
virTristateSwitch memAccess = def->cpu->cells[i].memAccess;
~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~^~~~~~~~~
1 error generated.
Fix that by using virMemAccess instead of virTristateSwitch.
Commit f05b6a91 added virQEMUDriverConfigPtr argument to the
virQEMUCapsFillDomainCaps function and it uses forward declaration
of virQEMUDriverConfig and virQEMUDriverConfigPtr that casues clang
build to fail:
gmake[3]: Entering directory `/usr/home/novel/code/libvirt/src'
CC qemu/libvirt_driver_qemu_impl_la-qemu_capabilities.lo
In file included from qemu/qemu_capabilities.c:43:
In file included from qemu/qemu_hostdev.h:27:
qemu/qemu_conf.h:63:37: error: redefinition of typedef 'virQEMUDriverConfig'
is a C11 feature [-Werror,-Wtypedef-redefinition]
typedef struct _virQEMUDriverConfig virQEMUDriverConfig;
^
qemu/qemu_capabilities.h:328:37: note: previous definition is here
typedef struct _virQEMUDriverConfig virQEMUDriverConfig;
^
Fix that by passing loader and nloader config attributes directly
instead of passing complete config.
Commit f36a94f introduced a double free on all success paths
in qemuSharedDeviceEntryInsert.
Only call qemuSharedDeviceEntryFree on the error path and
set entry to NULL before jumping there if the entry already
is in the hash table.
https://bugzilla.redhat.com/show_bug.cgi?id=1142722
Clean up all _virDomainMemoryStat.
Signed-off-by: James <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Clean up all _virDomainBlockStats.
Signed-off-by: James <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Clean up all _virDomainInterfaceStats.
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Live definition was used to look up the disk index while persistent one
was indexed leading to a crash in qemuDomainGetBlockIoTune. Use the
correct def and report a nice error.
Unfortunately it's accessible via read-only connection, though it can
only crash libvirtd in the cases where the guest is hot-plugging disks
without reflecting those changes to the persistent definition. So
avoiding hotplug, or doing hotplug where persistent is always modified
alongside live definition, will avoid the out-of-bounds access.
Introduced in: eca96694a7f992be633d48d5ca03cedc9bbc3c9aa (v0.9.8)
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140724
Reported-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1135396
There are two ways how to tell qemu to use huge pages. The first one
is suitable for domains with NUMA nodes: the path to hugetlbfs mount
is appended to NUMA node definition on the command line. The second
one is suitable for UMA domains: here there's this global '-mem-path'
argument that accepts path to the hugetlbfs mount point. However, the
latter case was not used for all the cases that it should be. For
instance:
<memoryBacking>
<hugepages>
<page size='2048' unit='KiB' nodeset='0'/>
</hugepages>
</memoryBacking>
didn't trigger the '-mem-path' so the huge pages - despite being
configured - were not used at all.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
As of 136ad4974 it is possible to specify different huge pages per
guest NUMA node. However, there's no check if nodeset specified in
./hugepages/page contains only those guest NUMA nodes that exist.
In other words with current code it is possible to define meaningless
combination:
<memoryBacking>
<hugepages>
<page size='1048576' unit='KiB' nodeset='0,2-3'/>
<page size='2048' unit='KiB' nodeset='1,4'/>
</hugepages>
</memoryBacking>
<vcpu placement='static'>4</vcpu>
<cpu>
<numa>
<cell id='0' cpus='0' memory='1048576'/>
<cell id='1' cpus='1' memory='1048576'/>
<cell id='2' cpus='2' memory='1048576'/>
<cell id='3' cpus='3' memory='1048576'/>
</numa>
</cpu>
Notice the node 4 in <hugepages/>?
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch implements the VIR_DOMAIN_STATS_BLOCK group of statistics.
To do so, a helper function to get the block stats of all the disks of
a domain is added.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This patch implements the VIR_DOMAIN_STATS_INTERFACE group of
statistics.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This patch implements the VIR_DOMAIN_STATS_VCPU group of statistics. To
do so, this patch also extracts a helper to gather the vCPU information.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This patch implements the VIR_DOMAIN_STATS_CPU_TOTAL group of
statistics.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Future patches which will implement more bulk stats groups for QEMU will
need to access the connection object.
To accommodate that, a few changes are needed:
* enrich internal prototype to pass qemu driver object
* add per-group flag to mark if one collector needs monitor access or not
* If at least one collector of the requested stats needs monitor access
we must start a query job for each domain. The specific collectors
will run nested monitor jobs inside that.
* If the job can't be acquired we pass flags to the collector so
specific collectors that need monitor access can be skipped in order
to gather as much data as is possible.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Check to see if the UEFI binary mentioned in qemu.conf actually
exists, and if so expose it in domcapabilities like
<loader ...>
<value>/path/to/ovmf</value>
</loader>
We introduce some generic domcaps infrastructure for handling
a dynamic list of string values, it may be of use for future bits.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Up till now the virQEMUCapsFillDomainCaps() was type of void as
there was no way for it to fail. This is, however, going to
change in the next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
qemu for IBM Power processor architecture is adding functionality for
supporting multiple 'pseries' machine type versions, each with different
capabilities. This patch is for supporting the same
Signed-off-by: Pradipta Kr. Banerjee <bpradip@in.ibm.com>
As of 542899168c we learned libvirt to use UEFI for domains.
However, management applications may firstly query if libvirt
supports it. And this is where virConnectGetDomainCapabilities()
API comes handy.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
virStorageSourceInitChainElement initializes a new storage chain element
for use as a new disk source. If the new element doesn't contain the
driver name, copy it from the old source.
This fixes issue where a disk would forget the driver after a snapshot.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140984
