For quite a long time we don't need to postpone queueing events until
the end of the function since we no longer have the big driver lock.
Let's make the code of qemuMigrationFinish simpler by queuing events at
the time we generate them.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Every single call to qemuDomainEventQueue() uses the following pattern:
if (event)
qemuDomainEventQueue(driver, event);
Let's move the check for valid event to qemuDomainEventQueue and
simplify all callers.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Finish is the final state in v2 of our migration protocol. If something
fails, we have no option to abort the migration and resume the original
domain. Non fatal errors (such as failure to start guest CPUs or make
the domain persistent) has to be treated as success. Keeping the domain
running while reporting the failure was just asking for trouble.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Whenever something fails during incoming migration in Finish phase
before we started guest CPUs, we need to kill the domain in addition to
reporting the failure.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When we save status XML at the point during migration where we have
already started the domain on destination, we can't really go back and
abort migration. Thus the only thing we can do is to log a warning and
report success.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Offline migration is quite special because we don't really need to do
anything but make the domain persistent. Let's do it separately from
normal migration to avoid cluttering the code with
!(flags & VIR_MIGRATE_OFFLINE).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If the current live definition does not have memory hotplug enabled, but
the persistent one does libvirt would reject migration if the
destination does not support memory hotplug even if the user didn't want
to persist the VM at the destination and thus the XML containing the
memory hotplug definition would not be used. To fix this corner case the
code will check for memory hotplug in the newDef only if
VIR_MIGRATE_PERSIST_DEST was used.
Commit id '2e7cea243' added a check for an error from Finish instead
of 'unexpected error'; however, if for some reason there wasn't an
error, then virGetLastError could return NULL resulting in the
NULL pointer deref to err->domain.
Libvirt doesn't reliably know the location of the backing chain when
pre-creating images for non-shared migration. This isn't a problem for
full copy, but incremental copy requires the information.
Forbid pre-creating the image in cases where incremental migration is
required. This limitation can perhaps be lifted once libvirt will fully
support loading of backing chain information from the XML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1249587
When stopping a domain on the destination host after a failed migration,
we need to avoid reseting security labels since the domain is still
running on the source host. While we were correctly doing so in some
cases, there were still some paths which did this wrong.
https://bugzilla.redhat.com/show_bug.cgi?id=1242904
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If destination libvirt doesn't support memory hotplug since all the
support was introduced by adding new elements the destination would
attempt to start qemu with an invalid configuration. The worse part is
that qemu might hang in such situation.
Fix this by sending a required migration feature called 'memory-hotplug'
to the destination. If the destination doesn't recognize it it will fail
the migration.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1248350
If we are migrating to an UNIX socket, we accept() a connection
from qemu and use that FD to set up a tunnel. However, the FD is
not closed as often as it should be.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When QEMU exits on destination during migration, the source reports
either success (if the failure happened at the very end) or unhelpful
"unexpectedly failed" error message. However, the Finish API called on
the destination may report a real error so let's use it instead of the
generic one.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virDomainMigrateFinish* APIs were unfortunately designed to return the
pointer to the domain on destination and NULL on error. This looks OK in
normal cases but the same API is also called when we know migration
failed and thus we expect Finish to return NULL even if it actually did
all it was supposed to do without any error. The call is defined to
return nonnull domain pointer over RPC, which means returning NULL will
always result in an error being send. If this was not in fact an error,
the API itself wouldn't set anything to the thread local virError, which
makes the RPC layer come up with it's own "Library function returned
error but did not set virError" error.
This is quite confusing and also hard to detect by the caller. This
patch adds a special error code which can be used to check that Finish
successfully aborted migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If QEMU fails during incoming migration, the domain disappears including
a possibly useful error message read from QEMU log file. Let's remember
the error in virQEMUDriver so that Finish can report more than just "no
such domain".
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Since we already support the MIGRATION event, we just need to make sure
the domain condition is signalled whenever a p2p connection drops or the
domain is paused due to IO error and we can avoid waking up every 50 ms
to check whether something happened.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We don't need to call query-migrate every 50ms when we get the current
migration state via MIGRATION event.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When migration fails in qemuMigrationPrepareAny, we unconditionally call
qemuDomainRemoveInactive, which should only be called for transient
domains. The check for !vm->persistent was accidentally removed by
commit 540c339.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When a connection to the destination host during a p2p migration drops,
we know we will have to cancel the migration; it doesn't make sense to
waste resources by trying to finish the migration. We already do so
after sending "migrate" command to QEMU and we should do it while
waiting for drive mirrors to become ready too.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Checking status of all part of migration and aborting it when something
failed is a complex thing which makes the waiting loop hard to read.
This patch moves all the checks into a separate function similarly to
what was done for drive mirror loops.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Instead of passing current job name to several functions which already
know what the current job is we can generate the name where we actually
need to use it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Once we start waiting for migration events instead of polling
query-migrate, priv->job.current will not be regularly updated anymore
because we will get the current status directly from the events. Thus
virDomainGetJob{Info,Stats} will have to query QEMU, but they can't just
blindly update priv->job.current structure. This patch introduces
qemuMigrationFetchJobStatus which just fills in a caller supplied
structure and makes qemuMigrationUpdateJobStatus a tiny wrapper around
it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
QEMU_CAPS_SEAMLESS_MIGRATION capability says QEMU supports
SPICE_MIGRATE_COMPLETED event. Thus we can just drop all code which
polls query-spice and replace it with waiting for the event.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When libvirtd is restarted during migration, we properly cancel the
ongoing migration (unless it managed to almost finished before the
restart). But if we were also migrating storage using NBD, we would
completely forget about the running disk mirrors.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Abort migration as soon as we detect that some of the disk mirrors
failed. There's no sense in trying to finish memory migration first.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Instead of cancelling disk mirrors sequentially, let's just call
block-job-cancel for all migrating disks and then wait until all
disappear.
In case we cancel disk mirrors at the end of successful migration we
also need to check all block jobs completed successfully. Otherwise we
have to abort the migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
By switching block jobs to use domain conditions, we can drop some
pretty complicated code in NBD storage migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Because we are polling we may detect some errors after we asked QEMU for
migration status even though they occurred before. If this happens and
QEMU reports migration completed successfully, we would happily report
the migration succeeded even though we should have cancelled it because
of the other error.
In practise it is not a big issue now but it will become a much bigger
issue once the check for storage migration status is moved inside the
loop in qemuMigrationWaitForCompletion.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1203032
Implement a `migrate_disks' parameters for the QEMU driver. This multi-
value parameter can be used to explicitly specify what block devices
are to be migrated using the NBD server. Tunnelled migration using NBD
is to be done.
Signed-off-by: Pavel Boldin <pboldin@mirantis.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When playing with disk migration lately, I've noticed this warning in
domain logs:
WARNING: Image format was not specified for 'nbd://masina:49153/drive-virtio-disk0' and probing guessed raw.
Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted.
Specify the 'raw' format explicitly to remove the restrictions.
So I started digging into qemu source code to see what has triggered
the warning. I'd expect qemu to know formats of guest's disks since we
tell them on command line. This lead me to qmp_drive_mirror() where
the following can be found:
if (!has_format) {
format = mode == NEW_IMAGE_MODE_EXISTING ? NULL : bs->drv->format_name;
}
So, format is automatically initialized from the disk iff mode !=
"existing". Unfortunately, in migration we are tied to use this mode
(NBD doesn't support creating new images). Therefore the only way to
avoid this warning is to pass format. The discussion on the mail-list [1]
resulted in the code that always forces NBD export as "raw" format.
[1] https://www.redhat.com/archives/libvir-list/2015-June/msg00153.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Pavel Boldin <pboldin@mirantis.com>
This function is returning a string (domain XML). Since d3ce7363
when it was first introduced, it was indented incorrectly:
static char
*qemuMigrationBeginPhase(..)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
By default, getaddrinfo() will return addresses for both
IPv4 and IPv6 if both protocols are enabled, and so the
RPC code will listen/connect to both protocols too. There
may be cases where it is desirable to restrict this to
just one of the two protocols, so add an 'int family'
parameter to all the TCP related APIs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Most virDomainDiskIndexByName callers do not care about the index; what
they really want is a disk def pointer.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When cancelling drive mirror, always try to do that for all disks even
if it fails for some of them. Report the first error we saw.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Instead of redoing the same filtering over and over everytime we need to
walk through all disks which are being migrated.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
As of eeb008dbfcf31 the variable is not used anymore. Drop it.
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When migrating a domain while changing its name and using
VIR_MIGRATE_PERSIST_DEST flag, libvirt would fail to properly change the
name in the persistent definition. The inconsistency results in weird
behavior when dumping domain XML, destroying the domain, restarting
libvirtd and likely in several other situations.
Since the new name is already stored in vm->def->name, we just need to
make sure the persistent definition uses this new name too.
https://bugzilla.redhat.com/show_bug.cgi?id=1076354
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In qemuMigrationDriveMirror we can start all disk mirrors in parallel.
We wait until they are all ready, or one of them aborts.
In qemuMigrationCancelDriveMirror, we wait until all mirrors are
properly stopped. This is necessary to ensure that destination VM is
fully in sync with the (paused) source VM.
If a drive mirror can not be cancelled, then the destination is not in a
consistent state. In this case it is not safe to continue with the
migration.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
virDomainGetJobStats is able to report statistics of a completed
migration, however to get usable downtime and total time statistics both
hosts have to keep synchronized time. To provide at least some
estimation of the times even when NTP daemons are not running on both
hosts we can just ignore the time needed to transfer a migration cookie
to the destination host. The result will be also inaccurate but a bit
more predictable. The total/down time will just be at least what we
report.
https://bugzilla.redhat.com/show_bug.cgi?id=1213434
This is basically turning qemuDomObjEndAPI into a more general
function. Other drivers which gets a reference to domain objects may
benefit from this function too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This needs to specified in way too many places for a simple validation
check. The ostype/arch/virttype validation checks later in
DomainDefParseXML should catch most of the cases that this was covering.
1. 'last_good_net' indicates the index of last successfully configured
net. so def->nets[last_good_net] should also be clean up if error occurs.
2. if error occurs in 'virNetDevMacVLanVPortProfileRegisterCallback'
(second 'goto err_exit' in loop), we should also do
'virNetDevVPortProfileDisassociate' cleanup for the
'virNetDevVPortProfileAssociate'(first code block in loop). So we should
consider the net is successfully configured after first code block in
loop finishes.
Signed-off-by: Huanle Han <hanxueluo@gmail.com>
