Commit Graph

4419 Commits

Author SHA1 Message Date
Peter Krempa
07780553f6 conf: domain_addr: Refactor hash usage in zpci reservation code
Rewrite using GHashTable which already has interfaces for using a number
as hash key.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2020-10-22 15:02:46 +02:00
Jonathon Jongsma
08f8fd8413 conf: Add support for vDPA network devices
This patch adds new schema and adds support for parsing and formatting
domain configurations that include vdpa devices.

vDPA network devices allow high-performance networking in a virtual
machine by providing a wire-speed data path. These devices require a
vendor-specific host driver but the data path follows the virtio
specification.

When a device on the host is bound to an appropriate vendor-specific
driver, it will create a chardev on the host at e.g.  /dev/vhost-vdpa-0.
That chardev path can then be used to define a new interface with
type='vdpa'.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
2020-10-20 14:46:52 -04:00
Erik Skultety
2508d10f67 conf: domain: sev: Make 'cbitpos' & 'reducedPhysBits' attrs optional
These XML attributes have been mandatory since the introduction of SEV
support to libvirt. This design decision was based on QEMU's
requirement for these to be mandatory for migration purposes, as
differences in these values across platforms must result in the
pre-migration checks failing (not that migration with SEV works at the
time of this patch).

Expecting the user to specify these is cumbersome and the same XML
cannot be re-used across different revisions of SEV. Since
we have SEV platform information saved in QEMU capabilities, we can
make the attributes optional and should fill them in automatically
in the QEMU driver right before starting it.

Resolves: https://gitlab.com/libvirt/libvirt/-/issues/57

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2020-10-19 11:03:39 +02:00
Erik Skultety
ccb40cf288 qemu: process: sev: Fill missing 'cbitpos' & 'reducedPhysBits' from caps
These XML attributes have been mandatory since the introduction of SEV
support to libvirt. This design decision was based on QEMU's
requirement for these to be mandatory for migration purposes, as
differences in these values across platforms must result in the
pre-migration checks failing (not that migration with SEV works at the
time of this patch).

This patch enables autofill of these attributes right before launching
QEMU and thus updating the live XML.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2020-10-19 11:03:27 +02:00
Michal Privoznik
76db9e8bcd lib: s/free-page-reporting/freePageReporting/
In fee8a61d29 a new attribute to <memballoon/> was introduced:
free-page-reporting. We don't really like hyphens in attribute
names. Use camelCase instead.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-10-15 10:57:11 +02:00
Nico Pache
fee8a61d29 Document and parser support for the Virtio free page reporting feature.
This will add the proper documentation and parser support for the free page
reporting feature that is introduced in QEMU 5.1.

Signed-off-by: Nico Pache <npache@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-10-13 17:01:38 +02:00
Pavel Hrdina
71a6522e4f conf: virsecretobj: fix g_new0 allocation
Fixes commit <d5b05614dfbc9bd60ea1a31a9cc32aaf3c771ddc> which changed
allocation from VIR_ALLOC_N to g_new0 but missed one +1 on number of
allocated elements.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
2020-10-13 09:10:11 +02:00
Pavel Hrdina
8a666dccda conf: fix g_new0 allocation
Fixes commit <a5d88ffe0ad9b5d5314ab0058c5b363f9f79b8ee> which changed
allocation from VIR_ALLOC_N to g_new0 but missed some +1 on number of
allocated elements.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
2020-10-13 09:10:11 +02:00
Ján Tomko
366682c5e3 conf: virDomainUSBAddressHubNew: refactor
Remove the pointless variable and pointer stealing.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-10-08 11:09:27 +02:00
Ján Tomko
a5d88ffe0a conf: use g_new0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-10-08 11:09:27 +02:00
Ján Tomko
7ff9f76a2e conf: cpu: use g_new0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-10-08 11:09:27 +02:00
Ján Tomko
1eb1413410 conf: nwfilter_params: use g_new0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-10-08 11:09:27 +02:00
Ján Tomko
d5b05614df conf: virsecretobj: use g_new0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-10-08 11:09:27 +02:00
Ján Tomko
cbe919915e conf: storage: use g_new0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-10-08 11:09:27 +02:00
Ján Tomko
1030b0aba1 conf: numa: use g_new0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-10-08 11:09:27 +02:00
Ján Tomko
6dc231438f conf: interface: use g_new0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-10-08 11:09:27 +02:00
Ján Tomko
ba6cc0fc7a conf: domain_addr: use g_new0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-10-08 11:09:27 +02:00
Ján Tomko
a62b07641e conf: node_device: use g_new0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-10-08 11:09:27 +02:00
Ján Tomko
a5fce5897c conf: network: use g_new0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-10-08 11:09:26 +02:00
Ján Tomko
9225b4f116 conf: capabilities: use g_new0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-10-08 11:09:26 +02:00
Ján Tomko
9b0c71a39b conf: domain: use g_new0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-10-08 11:09:26 +02:00
Tim Wiederhake
4c3ed3b84e cpu: Wire in XML validation
This adds a new value to virConnectCompareCPUFlags,
"VIR_CONNECT_CPU_VALIDATE_XML", that governs XML document validation in
virCPUDefParseXML.

In src/conf/cpu_conf.c, include configmake.h for PKGDATADIR and
virfile.h for virFileFindResource.

Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2020-10-07 11:26:27 +02:00
Cole Robinson
0fa5c23865 qemu: Taint cpu host-passthrough only after migration
From a discussion last year[1], Dan recommended libvirt drop the tain
flag for cpu host-passthrough, unless the VM has been migrated.

This repurposes the existing host-cpu taint flag to do just that.

[1]: https://www.redhat.com/archives/virt-tools-list/2019-February/msg00041.html

https://bugzilla.redhat.com/show_bug.cgi?id=1673098

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2020-10-05 10:08:26 -04:00
Peter Krempa
f12f4e2658 virDomainResctrlNew: Refactor allocation to remove 'cleanup' label
If we use g_new0 there's no need for the 'cleanup' label as there's
nothing to fail after the allocation.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-10-05 15:50:45 +02:00
Peter Krempa
d8a354954a Use 'virBitmapNewCopy' instead of 'virBitmapCopy'
There are only 3 places using the function. Two can use virBitmapNewCopy
directly. In case of the qemu capabilities code we need to free the old
bitmap first.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-10-05 15:50:45 +02:00
Peter Krempa
faa88866f5 Don't check return value of virBitmapNewCopy
The function will not fail any more.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-10-05 15:50:45 +02:00
Peter Krempa
cb6fdb0125 virBitmapNew: Don't check return value
Remove return value check from all callers.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-10-05 15:38:47 +02:00
Peter Krempa
bab5a79d6a util: bitamp: Remove virBitmapNewEmpty
It can be replaced by virBitmapNew(0).

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-10-05 15:38:47 +02:00
Laine Stump
be0791039e conf: use g_free() instead of VIR_FREE in virDomainNetDefFree()
All these lines were moved over from the now-defunct
virDomainNetDefClear(), which required all pointers to be cleared
after free, but virDomainNetDefFree() doesn't have that restriction -
after free'ing the pointers are never again referenced, so g_free() is
safe.

Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-10-01 14:02:33 -04:00
Laine Stump
47d622b560 conf: eliminate virDomainNetDefClear()
This function is no longer used anywhere except virDomainNetDefFree(),
so just inline its contents there.

Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-10-01 14:02:33 -04:00
Ján Tomko
fdaa14c3a3 conf: introduce virDomainDefControllersParse
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-10-01 17:35:29 +02:00
Ján Tomko
55e18ab4ac conf: introduce virDomainDefClockParse
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-10-01 17:35:29 +02:00
Ján Tomko
85a1c1a563 conf: introduce virDomainDefLifecycleParse
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-10-01 17:35:29 +02:00
Ján Tomko
b06441500b conf: introduce virDomainDefTunablesParse
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-10-01 17:35:29 +02:00
Ján Tomko
a025a0484d conf: split out virDomainDefParseMemory
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-10-01 17:35:29 +02:00
Ján Tomko
ec8dafd01e conf: split out virDomainDefParseIDs
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-10-01 17:35:29 +02:00
Michal Privoznik
2752a67826 virDomainNumaFillCPUsInNode: Skip over NUMA nodes without vCPUs
After v6.5.0-rc1~148 we started to rectify vCPU to guest NUMA
assignment - if there is a vCPU not assigned to any guest NUMA
node it is automatically assigned to node #0.

A month later I've made it possible to define guest NUMA nodes
without vCPUs (v6.6.0-rc1~250) - this is needed because of HMAT.
As a part of that I fixed all callers of
virDomainNumaGetNodeCpumask() (which returns a bitmap of vCPUs for
given node) to handle case when NULL is returned (i.e. no vCPUs
assigned to given node). But of course my patch was written
before aforementioned vCPU rectify patch but merged afterwards
and hence I missed the virDomainNumaFillCPUsInNode() caller.

And because we are dealing with a NULL pointer, of course this
leads to a crash. Just try to define a domain with at least two
NUMA nodes and no vCPU assignment to any of the nodes.

Fixes: a26f61ee0c
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1880289
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2020-10-01 10:36:17 +02:00
Peter Krempa
797ee40b21 virDomainSnapshotDiskDefFree: Export and register as autoptr func
Allow using the function for creating temporary snapshot disk
definitions for creating <transient/> disk overlays.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
2020-10-01 09:55:02 +02:00
Cornelia Huck
2fefbd03ab virDomainNetFindIdx: add support for CCW addresses
Allow to match with CCW addresses in addition to PCI addresses
(and MAC addresses).

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2020-09-24 13:48:31 +02:00
Sebastian Mitterle
f3954c5537 virDomainCCWAddressAssign: Drop spurious space at end of error message
Signed-off-by: Sebastian Mitterle <smitterl@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2020-09-23 22:45:45 +02:00
Peter Krempa
bd7601282c virDomainSnapshotDiskDef: Remove 'idx' field
It's no longer needed and is valid only after virDomainSnapshotAlignDisks
is called while holding the lock.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-09-23 22:39:42 +02:00
Peter Krempa
d3c029bb10 virDomainSnapshotAlignDisks: refactor extension to all disks
Last step of the algorithm in virDomainSnapshotAlignDisks is to extend
the array of disks to all VM's disk and provide defaults. This was done
by extending the array, adding defaults at the end and then sorting it.
This requires the 'idx' variable and also a separate sorting function.

If we store the pointer to existing snapshot disk definitions in a hash
table and create a new array of snapshot disk definitions, we can fill
the new array directly by either copying the definition from the old
array or adding the default.

This avoids the sorting step and thus even the need to store the index
of the domain disk altogether.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2020-09-23 22:39:24 +02:00
Peter Krempa
17c238626b virDomainSnapshotAlignDisks: clarify handing of snapshot location
Remove the use of the 'disk_snapshot' temporary variable since accessing
the disk definition now isn't that much longer to write and use explicit
value checks instead of the (non-)zero check to make it more obvious
what the code is doing.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2020-09-23 22:39:13 +02:00
Peter Krempa
98d856dcf9 virDomainSnapshotAlignDisks: remove unnecessary 'tmp' variable
The converted string is used exactly once so we can call the conversion
without storing the result in a variable.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-09-23 22:38:49 +02:00
Peter Krempa
df35821978 virDomainSnapshotAlignDisks: Extract domain disk definition to a local variable
Extract the disk def to a local variable so that it's more obvious
what's happening and it will also allow further simplification.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-09-23 22:38:49 +02:00
Peter Krempa
e2f1919907 virDomainSnapshotAlignDisks: Add 'domdef' local variable
There are multiple places accessing the domain definition. Extract it to
a local variable so that it's more clear what's happening.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-09-23 22:38:49 +02:00
Peter Krempa
ec725d31bd virDomainSnapshotAlignDisks: Rename 'disk' -> 'snapdisk'
The 'disk' variable usually refers to a definition of a disk from the
domain definition. Rename it to 'snapdisk' to be clear that we are
talking about the snapshot disk definition especially since this
function also accesses the domain disk definition.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-09-23 22:38:49 +02:00
Peter Krempa
d6ffb70df2 virDomainSnapshotAlignDisks: Rename 'def' -> 'snapdef'
While this function resides in the snapshot config module, the 'def'
variable is referencing the VM definition in most places. Change the
name to 'snapdef' to avoid ambiguity especially since we are also
dealing with the domain definition in this function.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-09-23 22:38:27 +02:00
Peter Krempa
c4e320d6cf virDomainSnapshotAlignDisks: Refactor cleanup
Use automatic pointer for the bitmap and get rid of the 'cleanup' label
and 'ret' variable.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-09-23 22:37:56 +02:00
Peter Krempa
18cc8bb3f6 virStorageVolDefParseXML: Use g_steal_pointer
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-09-23 22:37:56 +02:00