Since we virEventRegisterDefaultImpl is now a public API, callers need
a way to invoke the default registered Handle and Timeout functions. We
already have general functions for these internally, so promote
them to the public API.
v2:
Actually add APIs to libvirt.h
Producing an xml file just for name and description fields is
overkill; this makes life easier from virsh.
* tools/virsh.c (cmdSnapshotCreateAs): New command.
(snapshotCmds): Install it.
* tools/virsh.pod: Document it.
The 'char *cur' variable was being assigned from a
'const char *' string, thus discarding constness.
As well as causing a compile warning, it masked a
piece of code which attempts to assign to the
previously const string.
* tools/virsh.c: Fix const-ness of 'cur' variable in vcpupin
When resetting vcpupin setting, we have to specify all host physical
cpus as a cpulist parameter of virsh vcpupin command. It's a little
tedious.
This patch changes to allow to receive the special keyword 'r' as a cpulist
parameter of virsh vcpupin command when resetting vcpupin setting.
If you set the following:
# virsh vcpupin VM 0 r
the vcpu0 will be pinned to all physical cpus.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
When using vcpupin command, we have to speficy comma-separated list as cpulist,
but this is tedious in case the number of phsycal cpus is large.
This patch improves this by introducing special markup "-" and "^" which are
similar to XML schema of "cpuset" attribute.
The example:
# virsh vcpupin Guest 0 0-15,^8
is identical to
# virsh vcpupin Guest 0 0,1,2,3,4,5,6,7,9,10,11,12,13,14,15
NOTE: The expression is sequentially evaluated, so "0-15,^8" is not identical
to "^8,0-15".
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
This reduces things from O(n^2) to O(n).
* tools/virsh.c (vshCommandOptArgv): Change signature.
(cmdEcho): Update caller.
Based on a patch by Lai Jiangshan.
Define two new virsh commands:
* blockpull: Perform block pull operations (incremental plus start
and stop continuous streams)
* blockpullinfo: Retrieve progress info for continuous block pull
Share print_job_progress() with the migration code.
* tools/virsh.c: implement the new commands
Signed-off-by: Adam Litke <agl@us.ibm.com>
A VSH_OFLAG_REQ_OPT option means --optionname is required when used.
It will kill any ambiguity, even a !VSH_OFLAG_REQ option listed before
a VSH_OFLAG_REQ option, if the !VSH_OFLAG_REQ option is a
VSH_OFLAG_REQ_OPT option.
It will help us use optional argument with VSH_OT_ARGV argument.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
A name will improve the usege, example
# virsh help echo
NAME
echo - echo arguments
SYNOPSIS
echo [--shell] [--xml] [<string>]...
DESCRIPTION
Echo back arguments, possibly with quoting.
OPTIONS
--shell escape for shell use
--xml escape for XML use
<string> arguments to echo
"[<string>]..." is added to SYNOPSIS.
"<string> arguments to echo" is added to OPTIONS.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Qemu once supported following memory stats which will returned by
"query_balloon":
stat_put(dict, "actual", actual);
stat_put(dict, "mem_swapped_in", dev->stats[VIRTIO_BALLOON_S_SWAP_IN]);
stat_put(dict, "mem_swapped_out", dev->stats[VIRTIO_BALLOON_S_SWAP_OUT]);
stat_put(dict, "major_page_faults", dev->stats[VIRTIO_BALLOON_S_MAJFLT]);
stat_put(dict, "minor_page_faults", dev->stats[VIRTIO_BALLOON_S_MINFLT]);
stat_put(dict, "free_mem", dev->stats[VIRTIO_BALLOON_S_MEMFREE]);
stat_put(dict, "total_mem", dev->stats[VIRTIO_BALLOON_S_MEMTOT]);
But it later disabled all the stats except "actual" by commit
07b0403dfc2b2ac179ae5b48105096cc2d03375a.
libvirt doesn't parse "actual", so user will always see a empty result
with "virsh dommemstat $domain". Even qemu haven't disabled the stats,
we should support parsing "actual".
This patch deprecates following enums:
VIR_DOMAIN_MEM_CURRENT
VIR_DOMAIN_MEM_LIVE
VIR_DOMAIN_MEM_CONFIG
VIR_DOMAIN_VCPU_LIVE
VIR_DOMAIN_VCPU_CONFIG
VIR_DOMAIN_DEVICE_MODIFY_CURRENT
VIR_DOMAIN_DEVICE_MODIFY_LIVE
VIR_DOMAIN_DEVICE_MODIFY_CONFIG
And modify internal codes to use virDomainModificationImpact.
This patch adds the new option (--live, --config and --current) to
"virsh vcpupin" command. The behavior of above aption is the same as
that of "virsh setmem", "virsh setvcpus", and whatnot.
When the --config option is specified, the command affects a persistent
domain, while --live option is specified, it affects a running (live) domain.
The --current option cannot be used with --config or --live at the same
time, and when --current is specified, it affects a "current" domain.
Coverity complained about these intentional fallthrough cases, but
not about other cases that were explicitly marked with nice comments.
For some reason, Coverity doesn't seem smart enough to parse the
up-front English comment in virsh about intentional fallthrough :)
* tools/virsh.c (cmdVolSize): Mark fallthrough in a more typical
fashion.
* src/conf/nwfilter_conf.c (virNWFilterRuleDefDetailsFormat)
(virNWFilterRuleDetailsParse): Mark explicit fallthrough.
This commit is safe precisely because there has been no release
for any of the enum values being deleted (they were added post-0.9.1).
After the 0.9.2 release, we can then take advantage of
virDomainModificationImpact in more places.
* include/libvirt/libvirt.h.in (virDomainModificationImpact): New
enum.
(virDomainSchedParameterFlags, virMemoryParamFlags): Delete, since
these were never released, and the new enum works fine here.
* src/libvirt.c (virDomainGetMemoryParameters)
(virDomainSetMemoryParameters)
(virDomainGetSchedulerParametersFlags)
(virDomainSetSchedulerParametersFlags): Update documentation.
* src/qemu/qemu_driver.c (qemuDomainSetMemoryParameters)
(qemuDomainGetMemoryParameters, qemuSetSchedulerParametersFlags)
(qemuSetSchedulerParameters, qemuGetSchedulerParametersFlags)
(qemuGetSchedulerParameters): Adjust clients.
* tools/virsh.c (cmdSchedinfo, cmdMemtune): Likewise.
Based on ideas by Daniel Veillard and Hu Tao.
I intentionally set things up so 'virsh help interface' lists
commands in alphabetical order, but 'man virsh' lists them in
topical order; this matches our practice on some other commands.
* tools/virsh.pod: Document all iface commands.
* tools/virsh.c (ifaceCmds): Sort.
The virSysinfoIsEqual method was mistakenly inside a #ifndef WIN32
conditional.
The existing virSysinfoFormat is also stubbed out on Win32, even
though the code works without any trouble. This breaks XML output
on Win32, so the stub is removed.
virsh migrate mistakenly had some variables inside the conditional
* src/util/sysinfo.c: Build virSysinfoIsEqual on Win32 and remove
Win32 stub for virSysinfoFormat
* tools/virsh.c: Fix variable declaration on Win32
Switch virsh migrate over to use virDomainMigrate2 and
virDomainMigrateToURI2. This is still compatible with
older libvirts, because these methods dynamically choose
whether to perform v1, v2 or v3 migration based on declared
RPC support from the libvirtd instances
Add a --xml arg which allows the user to pass in a custom
XML document. This XML document must be ABI compatible
with the current *live* XML document for the running guest
on the source host. ABI compatibility will be enforced by
any driver supporting this function
* tools/virsh.c: Add '--xml' arg to migrate command
Since we can now set just --live or --config, we also need to be
able to query that back.
In the case of setting both --live and --config, it shouldn't matter
which value we read back; otherwise, since querying treats the two
flags as mutually exclusive, so does this patch.
* tools/virsh.c (cmdSchedinfo): Use new API where appropriate.
The new flags allow to pick current state, config or the live
parameter, with current being the existing API default (0).
This also hooks this to --config, --live, --current parameters for
the memtune virsh command
* include/libvirt/libvirt.h.in: defines the new flags
* tools/virsh.c: adds support at virsh level
* tools/virsh.pod: updates virsh documentation
Ramon de Carvalho Valle reported a problem with:
virsh connect qemu:///system
as a non-root user. The real root problem appears to be a regression
in libvirtd being auto-started on the default qemu:///session URI;
however, the symptom points to an independent flaw in virsh - we
shouldn't be wasting efforts on making a connection if we aren't going
to be using that connection. Fixing virsh avoids Ramon's issue, while
I work in the meantime to fix the real libvirtd regression.
This patch looks big, but that's because 'gcc -Wmissing-field-initializers'
gets triggered by './autobuild.sh --enable-compile-warnings=error', so I
had to add 0 initialization to everyone (rather than my preference of
just adding the non-zero flags to virshCmds and to cmdConnect).
Meanwhile, if you use 'virsh -c URI', the connection must succeed; this
patch _only_ optimizes the default connection to be deferred to a later
point where we know if a particular command to be run needs a connection.
* tools/virsh.c (VSH_CMD_FLAG_NOCONNECT): New flag.
(vshCmdDef): Add new flags field.
(vshCommandRun): Honor new flag.
(domManagementCmds, domMonitoringCmds, storagePoolCmds)
(storageVolCmds, networkCmds, nodedevCmds, ifaceCmds)
(nwfilterCmds, secretCmds, virshCmds, snapshotCmds)
(hostAndHypervisorCmds): Populate new field.
(vshReconnect): Don't warn on initial connection.
virsh didn't call virInitialize(), which (among other things)
initializes virLastErr thread local variable. As a result of that, virsh
could just segfault in virEventRegisterDefaultImpl() since that is the
first call that touches (resets) virLastErr.
I have no idea what lucky coincidence made this bug visible but I was
able to reproduce it in 100% cases but only in one specific environment
which included building in sandbox.
We already have virAsprintf, so picking a similar name helps for
seeing a similar purpose. Furthermore, the prefix V before printf
generally implies 'va_list', even though this variant was '...', and
the old name got in the way of adding a new va_list version.
global rename performed with:
$ git grep -l virBufferVSprintf \
| xargs -L1 sed -i 's/virBufferVSprintf/virBufferAsprintf/g'
then revert the changes in ChangeLog-old.
Clang detected that vol-download will call unlink(NULL) if there
is a parse error during option parsing. Also, mingw doesn't like
unlinking an open file.
* tools/virsh.c (cmdVolDownload): Only unlink file if created.
Commit 36deff04 introduced a regression due to which virsh is not able
to log to a file - msg_buf was changed from an array to a pointer
without corresponding change to usage of "sizeof()".
Fix regression in virsh logging
Signed-off-by: Supriya Kannery <supriyak@in.ibm.com>
We don't use gnulib's sanitizations for vfprintf, but vshDebug
was used with %zu, which means that it would fail on mingw.
Thank goodness the compiler indirectly caught this for us :)
virsh.c: In function 'vshDebug':
virsh.c:12105:5: warning: function might be possible candidate for
'ms_printf' format attribute [-Wmissing-format-attribute]
since mingw <stdio.h> hasn't yet added gcc attributes to vfprintf.
* tools/virsh.c (vshDebug): Avoid vfprintf.
(vshPrintExtra): Use lighter-weight fputs.
Reported by Matthias Bolte.
This patch does the following things:
1. The return value of cmdSchedInfoUpdate() can be -1, 0 and 1. So the
type of return value should be int not bool.(This function is not a
entry of a virsh command, but the name of this function likes cmdXXX)
2. The type of cmdSchedinfo()'s, cmdFreecell()'s, cmdPoolList()'s and
cmdVolList()'s return value is bool not int, so change the type of
variable ret_val, func_ret and functionReturn.
3. Add a variable functionReturn for cmdMigrate(), cmdAttachInterface(),
cmdDetachInterface(), cmdAttachDisk() and cmdDetachDisk() to save the
return value.
4. Change the type of variable ret in the function cmdAttachDevice(),
cmdDetachDevice(), cmdUpdateDevice(), cmdAttachInterface(),
cmdDetachInterface(), cmdAttachDisk() and cmdDetachDisk() to int, as
we use it to save the return value of virXXX() and the type of virXXX()'s
return value is int not bool.
5. Do some cleanup when virBuff.error is 1.
The bug 1-4 were introduced by commit b56fa5bb.
Gnulib already guarantees <stdbool.h>, so it is easier to just
use the standardized spellings.
* tools/virsh.c (vshCmdDef): Change callback to return real bool.
(__vshControl): Change several fields to bool.
(vshCommandOptBool): Change return type.
All callers updated.
* tools/Makefile.am (virsh-net-edit.c, virsh-pool-edit.c):
Likewise.
Regression introduced in 0.8.5, commit c1564268. The command
'virsh freecell 0' quit working when it changed from an optional
string to an optional integer.
This patch introduces a slight change that specifying an option
twice is now detected as an error. It also changes things so
that a command that has more than 1 required option will not
complain about missing options if one but not all of the options
were given in long format, as in 'virsh vol-create --pool p file',
as well as making positional parsing work for all optional
options (each positional argument is associated with the earliest
option that has not yet been seen by name).
Optional boolean options can appear before required argument
options, because they don't affect positional argument parsing,
and obviously a required boolean option makes no sense.
Technically, this patch renders VSH_OT_STRING and VSH_OT_DATA
redundant; but cleaning that up can be a separate patch.
No command should ever need more than 32 options, right? :)
* tools/virsh.c (vshCmddefGetData, vshCmddefGetOption)
(vshCommandCheckOpts): Alter parameters to use bitmaps.
(vshCmddefOptParse): New function.
(vshCommandParse): Update for better handling of positional
arguments.
(vshCmddefHelp): Allow unit tests to validate options.
The current state of virsh parsing is that:
$ virsh vol-info /path/to/image
$ virsh vol-info --pool default /path/to/image
$ virsh vol-info --pool default --vol /path/to/image
all lookup the volume by path (technically, the last two also attempt
a name lookup within a pool, whereas the first skips that step, but
the end result is the same); meanwhile:
$ virsh vol-info default /path/to/image
complains about unexpected data. Why? Because the --pool option is
optional, so default was parsed as the --vol argument, and
/path/to/image.img doesn't match up with any remaining options that
require an argument. For proof, note that:
$ virsh vol-info default --vol /path/to/image
complains about looking up 'default' - the parser mis-associated both
arguments with --vol. Given the above, the only way to specify pool
is with an explicit "--pool" argument (you can't specify it
positionally). However, named arguments can appear in any order, so:
$ virsh vol-info /path/to/image --pool default
$ virsh vol-info --vol /path/to/image --pool default
have also always worked. Therefore, this patch has no functional
change on vol-info option parsing, but only on 'virsh help vol-info'
synopsis layout. However, it also allows the next patch to 1) enforce
that required options are always first (without this patch, the next
patch would fail the testsuite), and 2) allow the user to omit the
"--pool" argument. That is, the next patch makes it possible to do:
$ virsh vol-info /path/to/image default
which to date was not possible.
* tools/virsh.c (opts_vol_create_from, opts_vol_clone)
(opts_vol_upload, opts_vol_download, opts_vol_delete)
(opts_vol_wipe, opts_vol_info, opts_vol_dumpxml, opts_vol_key)
(opts_vol_path): List optional pool parameter after required
arguments.
Based on a smaller patch developed by Moritoshi Oshiro:
https://bugzilla.redhat.com/show_bug.cgi?id=693963
* tools/virsh.pod (freecell): Mention all, and clarify that
optional cellno requires --cellno.
This patch adds the new options (--live, --config, and --current) to
"virsh setmaxmem" command. The behavior of above options is the same
as that of "virsh setmem". When the --config option is specified, a
modification is effective for the persistent domain, while the --live
option is specified, a modification is effective for an active
domain. The --current option is specified, it affects a current
domain.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
This patch adds the new option (--current) to the "virsh setmem" command.
When --current option is specified, it affects a "current" domain.
The word "current" denotes that if a domain is running, it affects
a running domain only; otherwise it affects a persistent domain.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
When the new maximum memory size becomes less than the current memory size,
I think it is not the libvirt client but the each driver that decides the behavior
(reject the operation or shrink the current memory size).
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
1) Both "qemuDomainStartWithFlags" and "qemuAutostartDomain" try to
restore the domain from managedsave'ed image if it exists (by
invoking "qemuDomainObjRestore"), but it unlinks the image even
if restoring fails, which causes data loss. (This problem exists
for "virsh managedsave dom; virsh start dom").
The fix for is to unlink the managed state file only if restoring
succeeded.
2) For "virsh save dom; virsh restore dom;", it can cause data
corruption if one reuse the saved state file for restoring. Add
doc to tell user about it.
3) In "qemuDomainObjStart", if "managed_save" is NULL, we shouldn't
fallback to start the domain, skipping it to cleanup as a incidental
fix. Discovered by Eric.
Commit 78ba748ef1 claims to fix
documentation for swap_hard_limit virsh memtune option but it only fixes
documentation in formatdomain.html and libvirt.h. This patch completes
the task by fixing "virsh help memtune" output and memtune section of
virsh man page.
strcase{cmp/str} have the drawback of being sensitive to the global
locale; this is unacceptable in a library setting. Prefer a
hard-coded C locale alternative for all but virsh, which is user
facing and where the global locale isn't changing externally.
* .gnulib: Update to latest, for c-strcasestr change.
* bootstrap.conf (gnulib_modules): Drop strcasestr, add c-strcase
and c-strcasestr.
* cfg.mk (sc_avoid_strcase): New rule.
(exclude_file_name_regexp--sc_avoid_strcase): New exception.
* src/internal.h (STRCASEEQ, STRCASENEQ, STRCASEEQLEN)
(STRCASENEQLEN): Adjust offenders.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextEjectMedia):
Likewise.
* tools/virsh.c (namesorter): Document exception.
The new commands vol-upload and vol-download, allow a local file
to be transferred to/from a storage volume.
* tools/virsh.c: Add vol-upload and vol-download commands
* tools/virsh.pod: Document new commands
The Open Nebula driver has been unmaintained since it was first
introduced. The only commits have been for tree-wide cleanups.
It also has a major design flaw, in that it only knows about guests
that it has created itself, which makes it of very limited use.
Discussions wrt evolution of the VMWare ESX driver, concluded that
it should limit itself to single-node ESX operation and not try to
manage the multi-node architecture of VirtualCenter. Open Nebula
is a cluster like Virtual Center, not a single node system, so
the same reasoning applies.
The DeltaCloud project includes an Open Nebula driver and is a much
better fit architecturally, since it is explicitly targetting the
distributed multihost cluster scenario.
Thus this patch deletes the libvirt Open Nebula driver with the
recommendation that people use DeltaCloud for managing it instead.
* configure.ac: Remove probe for xmlrpc & --with-one arg
* daemon/Makefile.am, daemon/libvirtd.c, src/Makefile.am: Remove
ONE driver build
* src/opennebula/one_client.c, src/opennebula/one_client.h,
src/opennebula/one_conf.c, src/opennebula/one_conf.h,
src/opennebula/one_driver.c, src/opennebula/one_driver.c: Delete
files
* autobuild.sh, libvirt.spec.in, mingw32-libvirt.spec.in: Remove
build rules for Open Nebula
* docs/drivers.html.in, docs/sitemap.html.in: Remove reference
to OpenNebula
* docs/drvone.html.in: Delete file
"virsh connect ''" should try to connect to the default connection,
but the previous patch made it issue a warning about an invalid URI.
* tools/virsh.c (VSH_OFLAG_EMPTY_OK): New option flag.
(vshCommandOptString): Per the declaration, value is required to
be non-NULL. Honor new flag.
(opts_connect): Allow empty string connection.
At least protect the $uri variable against further expansion by properly
quoting it. While doing that, also quote all other variables to protect
against shell meta characters.
Signed-off-by: Philipp Hahn <hahn@univention.de>
Otherwise connection of hypervisor driver will be leaked when
one shutdown the guest in console. e.g.
[root@localhost]# init 0
......
init: Re-executing /sbin/init
Halting system...
Power down.
error: Failed to disconnect from the hypervisor, 1 leaked reference(s)
awk splits the line on consecutive spaces, which breaks getting the name
of a domain whose name contains spaces. Use sed instead to strip the
"Name:" prefix from the line
Signed-off-by: Philipp Hahn <hahn@univention.de>
This patch adds the new options (--live and --config) to "virsh setmem" command.
The behavior of above options is the same as that of "virsh setvcpus" and so on.
That is, when the --config option is specified, a modification is effective for
the persistent domain. Moreover we can modify the memory size of inactive domains
as well as that of active domains.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
as described at
http://wiki.debian.org/ToolChain/DSOLinkinghttps://fedoraproject.org/wiki/UnderstandingDSOLinkChange
otherwise the build fails on current Debian unstable with:
CCLD virsh
/usr/bin/ld: virsh-virsh.o: undefined reference to symbol 'xmlSaveTree@@LIBXML2_2.6.8'
/usr/bin/ld: note: 'xmlSaveTree@@LIBXML2_2.6.8' is defined in DSO //usr/lib/libxml2.so.2 so try adding it to the linker command line
//usr/lib/libxml2.so.2: could not read symbols: Invalid operation
This is needed to detect situations when optional argument was
specified with non-integer value: '--int-opt foo'. To keep functions
uniform vshCommandOptString function was also changed, because it
returns tri-state value as well. Given result pointer is updated only
in case of success. If parsing fails, result is not updated at all.
Not all applications have an existing event loop they need
to integrate with. Forcing them to implement the libvirt
event loop integration APIs is an undue burden. This just
exposes our simple poll() based implementation for apps
to use. So instead of calling
virEventRegister(....callbacks...)
The app would call
virEventRegisterDefaultImpl()
And then have a thread somewhere calling
static bool quit = false;
....
while (!quit)
virEventRunDefaultImpl()
* daemon/libvirtd.c, tools/console.c,
tools/virsh.c: Convert to public event loop APIs
* include/libvirt/libvirt.h.in, src/libvirt_private.syms: Add
virEventRegisterDefaultImpl and virEventRunDefaultImpl
* src/util/event.c: Implement virEventRegisterDefaultImpl
and virEventRunDefaultImpl using poll() event loop
* src/util/event_poll.c: Add full error reporting
* src/util/virterror.c, include/libvirt/virterror.h: Add
VIR_FROM_EVENTS
The event loop implementation is used by more than just the
daemon, so move it into the shared area.
* daemon/event.c, src/util/event_poll.c: Renamed
* daemon/event.h, src/util/event_poll.h: Renamed
* tools/Makefile.am, tools/console.c, tools/virsh.c: Update
to use new virEventPoll APIs
* daemon/mdns.c, daemon/mdns.c, daemon/Makefile.am: Update
to use new virEventPoll APIs
The daemon code calls virEventAddHandleImpl directly instead
of calling the wrapper virEventAddHandle.
* tools/console.c, daemon/libvirtd.c, daemon/mdns.c: Convert to
use primary event APIs
In a couple of commands virsh catches & ignores errors, but fails
to reset last_error. Thus the error is ignored, but still reported
to the user.
* tools/virsh.c: Reset last_error if ignoring an error
Alas, the shell is not a real programming language.
Patch generated by manual confirmation of vim's
s/[^"]\@<=\$\S\+\s\@=/"&"/gc
and
s/\(echo \)\@<=[^"].*\$.*$/"&"/c matches.
This patch generate a lot of noise and carries little benefits, as
I do not really expect $PKI to contain spaces or backticks. I'm just
fuming, and would not really mind if this patch is ignored
Right now, 'man libvirtd' includes information that depends on
configure results, so it must be generated on the fly and live
in $(builddir); however, requiring pod2man on all end user
machines is overkill. Meanwhile, 'man virsh' doesn't mention
any configure results, so it can be built at 'make dist' time.
If that situation changes in the future, we can generate virsh.1
in the same way that we generate libvirtd.8.
* daemon/Makefile.am (libvirtd.8.in): New rule, to run pod2man in
advance of distribution.
(libvirtd.8): Use only sed from tarball.
(EXTRA_DIST): Ship new file.
(libvirtd.pod): Delete unused rule.
(man8_MANS): Let automake know which section to use.
(CLEANFILES, MAINTAINERCLEANFILES): Adjust to new files.
* tools/Makefile.am (dist_man1_MANS): Distribute pre-built man
pages, fine since they don't require any substitution.
(virt-xml-validate.1, virt-pki-validate.1): Change input source.
(virsh.1): Build into srcdir.
(CLEANFILES, MAINTAINERCLEANFILES): Adjust to new build style.
* daemon/.gitignore: Update.
Reported by Diego Elio Pettenò.
Virsh freecell --all was not only getting wrong NUMA nodes count, but
even the NUMA nodes IDs. They doesn't have to be continuous, as I've
found out during testing this. Therefore a modification of
nodeGetCellsFreeMemory() error message.
Compilation on mingw was warning about %lld use in fprintf, and
in the gnulib strptime module about dead labels.
* tools/virsh.c (vshPrint): Change redirect.
(vshPrintExtra): Allow use within vshPrint. Avoid fprintf on
arbitrary formats, since we aren't using gnulib module; instead,
use virVasprintf to pre-format.
(vshError): Likewise.
* .gnulib: Update to latest, for mingw strptime warning fix.
Reported by Matthias Bolte.
Win32 doesn't have a concept of signal masks so disable that
code. It is unclear how SIGINT is delivered (if at all) on
Win32, so this might further work to provide an alternative
to pthread_sigmask
* tools/virsh.c: Avoid pthread_sigmask on Win32
Currently users who want to use virDomainQemuMonitorCommand() API or
it's virsh equivalent has to use the same protocol as libvirt uses for
communication to qemu. Since the protocol is QMP with current qemu and
HMP much more usable for humans, one ends up typing something like the
following:
virsh qemu-monitor-command DOM \
'{"execute":"human-monitor-command","arguments":{"command-line":"info kvm"}}'
which is not a very convenient way of debugging qemu.
This patch introduces --hmp option to qemu-monitor-command, which says
that the provided command is in HMP. If libvirt uses QMP to talk with
qemu, the command will automatically be converted into QMP. So the
example above is simplified to just
virsh qemu-monitor-command --hmp DOM "info kvm"
Also the result is converted from
{"return":"kvm support: enabled\r\n"}
to just plain HMP:
kvm support: enabled
If libvirt talks to qemu in HMP, --hmp flag is obviously a noop.
* src/fdstream.c (virFDStreamOpenFile, virFDStreamCreateFile):
Use VIR_FORCE_CLOSE instead of close.
* tests/commandtest.c (mymain): Likewise.
* tools/virsh.c (editFile): Use virCommand instead of system.
* src/util/util.c (__virExec): Special case preservation of std
file descriptors to child.
Use it in all places where a memory or storage request size is converted
to a larger granularity. This avoids requesting too small memory or storage
sizes that could result from the truncation done by a simple division.
This extends the round up fix in 6002e0406c
to the whole codebase.
Instead of reporting errors for odd values in the VMX code round them up.
Update the QEMU Argv tests accordingly as the original memory size 219200
isn't a even multiple of 1024 and is rounded up to 215 megabyte now. Change
it to 219100 and 219136. Use two different values intentionally to make
sure that rounding up works.
Update virsh.pod accordingly, as rounding down and rejecting are replaced
by rounding up.
If the memory of guest OS is changed constantly, the live migration
can not be ended ever for ever.
We can use the command 'virsh migrate-setmaxdowntime' to control the
live migration. But the value of maxdowntime is diffcult to calculate
because it depends on the transfer speed of network and constantly
changing memroy size. We need a easy way to control the live migration.
This patch adds the support of forcing guest to suspend at timeout.
With this patch, when we migrate the guest OS, we can specify a
timeout. If the live migration timeouts, auto-suspend the guest OS,
where the migration will complete offline.
While migration is in progress and virsh is waiting for its
completion, user may want to terminate the progress by pressing
Ctrl-C. But virsh just exits on user's Ctrl-C leaving migration
in background that user isn't even aware of. It's not reasonable.
This patch changes the behaviour for migration. For other
commands Ctrl-C still terminates virsh itself.
* .gnulib: Update to latest, for sigpipe and sigaction modules.
* bootstrap.conf (gnulib_modules): Add siaction, sigpipe, strerror_r.
* tools/virsh.c (vshSetupSignals) [!SIGPIPE]: Delete, now that
gnulib guarantees it.
(SA_SIGINFO): Define for mingw fallback.
* src/util/virterror.c (virStrerror): Simplify, now that gnulib
guarantees the POSIX interface.
* configure.ac (AC_CHECK_FUNCS_ONCE): Drop redundant check.
(AM_PROG_CC_STDC): Move earlier, to keep autoconf happy.
* tools/libvirt-guests.init.in: Rename...
* tools/libvirt-guests.init.sh: ...so that xgettext's language
detection via suffix will work.
* po/POTFILES.in: Update all references.
* tools/Makefile.am (EXTRA_DIST, libvirt-guests.init): Likewise.
* tools/libvirt-guests.init.sh: Use only POSIX shell features, which
includes using gettext.sh for translation rather than $"".
* tools/Makefile.am (libvirt-guests.init): Supply a few more substitutions.
* po/POTFILES.in: Mark that libvirt-guests.init needs translation.
Signed-off-by: Eric Blake <eblake@redhat.com>
Display or set unlimited values for memory parameters. Unlimited is
represented by INT64_MAX in memory cgroup.
Signed-off-by: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com>
Reported-by: Justin Clift <jclift@redhat.com>
The "Default-Stop" field in LSB comment in libvirt-guests is missing and should
be added. I also suggests to add runlevel 2 to the "Default-Start" field.
--
Laurent Léonard
When libvirt-guests is being stopped, I get the following message:
$Running guests on default URI: test-vm
$Suspending guests on default URI...
$Suspending test-vm: /etc/init.d/libvirt-guests: 340: Syntax error: Bad fd
number
Remove the optional option "group", as cmdHelp should accepts
only one option ("virsh help" supports both command and command
group now, and user rarely uses the options, so it doesn't matter
much for it being longer, :-)
* tools/virsh.c
* tools/virsh.c (find-storage-pool-sources-as and find-storage-pool-sources
should't be in command group "Domain Management", move them to group
"Storage Pool".
* tools/virsh.c (virsh shouldn't use 'phy' as the disk driver if
user doesn't specify "--driver", it causes bugs, as not all of
hypervisor driver supports 'phy', and actually hypervisor should
known the correct default disk driver and subdriver, so remove it)
As virsh help supports both command and command group now,
update "cmdHelp" to print consite help, (this patch is
increment of "7829052757953023b0826e0293ffe18ed4ab89e9").
And also remove redundant empty line in "vshUsage".
* tools/virsh.c
The output was previously:
-c | --connect <uri> hypervisor connection URI
-r | --readonly connect readonly
-d | --debug <num> debug level [0-5]
-h | --help this help
-q | --quiet quiet mode
-t | --timing print timing information
-l | --log <file> output logging to file
-v | --version[=short] program version
-V | --version=long version and full options
(note the blank line between the --version types)
This patch removes the extra blank line.
Change the virsh help out. The new output of "virsh help" and
"virsh --help" will be like:
Secret (help keyword 'secret'):
secret-define define or modify a secret from an XML file
secret-dumpxml secret attributes in XML
secret-set-value set a secret value
secret-get-value Output a secret value
secret-undefine undefine a secret
secret-list list secrets
Snapshot (help keyword 'snapshot'):
snapshot-create Create a snapshot
snapshot-current Get the current snapshot
snapshot-delete Delete a domain snapshot
snapshot-dumpxml Dump XML for a domain snapshot
snapshot-list List snapshots for a domain
snapshot-revert Revert a domain to a snapshot
Also support output help information of specified command group, e.g.
% ./tools/virsh help "Network Filter"
Network Filter (help keyword 'filter'):
nwfilter-define define or update a network filter from an XML file
nwfilter-undefine undefine a network filter
nwfilter-dumpxml network filter information in XML
nwfilter-list list network filters
nwfilter-edit edit XML configuration for a network filter
Each group has a help keyword, e.g.
% ./tools/virsh help filter
Network Filter (help keyword 'filter'):
nwfilter-define define or update a network filter from an XML file
nwfilter-undefine undefine a network filter
nwfilter-dumpxml network filter information in XML
nwfilter-list list network filters
nwfilter-edit edit XML configuration for a network filter
* tools/virsh.c:
- introduce new struct "vshCmdGrp" and macros to define the groups.
- split previous array "commands" into small arrays which are orgnized
by group
- changed some functions, e.g. "vshCmdDefSearch"
- Added new functions, e.g. "vshCmdGrpSearch"
- commands of each group are in "alphabetical order" now.
- command groups are in "alphabetical order" now.
- the commands are categorized with reference of
http://wiki.libvirt.org/page/VirshHelpV2 (by Justin)
- the modifications doesn't affect tests
* TODO:
- doc
Making this change makes it easier to spot the memory leaks
that will be fixed in the next patch.
* cfg.mk (sc_prohibit_xmlGetProp): New rule.
* .x-sc_prohibit_xmlGetProp: New exception.
* Makefile.am (EXTRA_DIST): Ship exception file.
* tools/virsh.c (cmdDetachInterface, cmdDetachDisk): Adjust
offenders.
* src/conf/storage_conf.c (virStoragePoolDefParseSource):
Likewise.
* src/conf/network_conf.c (virNetworkDHCPRangeDefParseXML)
(virNetworkIPParseXML): Likewise.
virsh was not checking for a error code when listing storage
volumes. So when listing volumes in a pool that was shutoff,
no output was displayed
* tools/virsh.c: Fix error handling when listing volumes
The "find-storage-pool-sources-as" command takes two arguments,
a hostname and a port number. For some reason the code would
also then look for a port number appended to the hostname
string by searching for ':'. This totally breaks if the user
gives an IPv6 address, and is redundant, since you can already
provide a port as a separate argument
* tools/virsh.c: Remove bogus port number handling code
The code generating XML for storage pool source discovery is
hardcoded to only allow a hostname and optional port number.
Refactor this code to make it easier to add support for extra
parameters.
* tools/virsh.c: Refactor XML generator
The virt-mem program is no longer shipped, but was still being
referenced at the bottom of the virsh and libvirtd man pages.
This patch removes it from those man pages, addressing
BZ# 639603:
https://bugzilla.redhat.com/show_bug.cgi?id=639603
Last time I ran ./autobuild.sh was on F13; and upgrading to F14
exposed these leftovers due to a newer gcov than what was in the stale
files, in the form of spurious messages that break 'make check':
+profiling:/home/remote/eblake/libvirt-tmp/tools/virsh-console.gcda:Version mismatch - expected 405R got 404R
and concluding with a bug in the autobuild.sh script itself:
./autobuild.sh: line 44: test: =: unary operator expected
* autobuild.sh: avoid syntax error on failed test
* tools/Makefile.am (CLEANFILES): Clean coverage files.
Per the gettext developer:
http://lists.gnu.org/archive/html/bug-gnu-utils/2010-10/msg00019.htmlhttp://lists.gnu.org/archive/html/bug-gnu-utils/2010-10/msg00021.html
gettext() doesn't work correctly on all platforms unless you have
called setlocale(). Furthermore, gnulib's gettext.h has provisions
for setting up a default locale, which is the preferred method for
libraries to use gettext without having to call textdomain() and
override the main program's default domain (virInitialize already
calls bindtextdomain(), but this is insufficient without the
setlocale() added in this patch; and a redundant bindtextdomain()
in this patch doesn't hurt, but serves as a good example for other
packages that need to bind a second translation domain).
This patch is needed to silence a new gnulib 'make syntax-check'
rule in the next patch.
* daemon/libvirtd.c (main): Setup locale and gettext.
* src/lxc/lxc_controller.c (main): Likewise.
* src/security/virt-aa-helper.c (main): Likewise.
* src/storage/parthelper.c (main): Likewise.
* tools/virsh.c (main): Fix exit status.
* src/internal.h (DEFAULT_TEXT_DOMAIN): Define, for gettext.h.
(_): Simplify definition accordingly.
* po/POTFILES.in: Add src/storage/parthelper.c.
I am replacing the last instances of close() I found with VIR_CLOSE() / VIR_FORCE_CLOSE respectively.
The first part patches virsh, which I missed out on previously.
The 2nd patch I had left out intentionally to look at it more carefully:
The 'closed' variable could be easily removed since it wasn't used anywhere else. The possible race condition that could result from the filedescriptor being closed and not set to -1 (and possibly let us write into 'something' totally different if the fd was allocated by another thread) seems to be prevented by the qemuMonitorLock() already placed around the code that reads from or writes to the fd. So the change of this code as shown in the patch should not have any side-effects.
The event watches need to be removed before the event loop
terminates, otherwise they cause a dangling reference to
be held on the virStreamPtr, which in turns holds a reference
on virConnectPtr, which in turn causes errors like
"Failed to disconnect from the hypervisor"
* tools/console.c: Remove watches before event loop quits
* tools/virsh.c: Print out dangling reference count
This re-writes the 'virsh console' command so that it uses
the new streams API. This lets it run remotely and/or as a
non-root user. This requires that virsh be linked against
the simple event loop from libvirtd in daemon/event.c
As an added bonus, it can now connect to any console device,
not just the first one.
* tools/Makefile.am: Link to event.c
* tools/console.c, tools/console.h: Rewrite to use the
virDomainOpenConsole() APIs with streams
* tools/virsh.c: Support choosing the console name
via --devname $NAME
* tools/virsh.c (vshParseArgv): Use NULL instead of 0 for pointer,
and symbolic names for has_arg. Give --version an optional arg.
(vshUsage): Document this.
* tools/virsh.pod: Likewise.
Using automated replacement with sed and editing I have now replaced all
occurrences of close() with VIR_(FORCE_)CLOSE() except for one, of
course. Some replacements were straight forward, others I needed to pay
attention. I hope I payed attention in all the right places... Please
have a look. This should have at least solved one more double-close
error.
To ease debugging this trivial patch allows to find what was compiled
in in the local version of libvirt, this doesn't work for remote access
but that's probably sufficient. With the patch I get on my machine:
paphio:~/libvirt/tools -> ./virsh -V
Virsh command line tool of libvirt 0.8.4
See web site at http://libvirt.org/
Compiled with support for:
Hypervisors: Xen QEmu/KVM UML OpenVZ LXC ESX PHYP Test
Networking: Remote Daemon Network Bridging Netcf Nwfilter
Storage: Dir Disk Filesystem SCSI Multipath iSCSI LVM
Miscellaneous: SELinux Secrets Debug Readline
paphio:~/libvirt/tools ->
* tools/virsh.c: add -V option
* tools/virsh.pod: document the extension
Now that the virsh parsing has been revamped, we can
implement qemu-monitor-command. This is basically the same
as it was in previous iterations, but has now been tested to
work both with the plain text monitor and the QMP monitor.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* tools/virsh.c (opts_freecell, opts_memtune, opts_vcpupin)
(opts_setvcpus, opts_setmaxmem, opts_setmem)
(opts_migrate_setmaxdowntime): Use VSH_OT_INT when only an integer
is expected.
(vshCmddefHelp, vshCmddefGetData): Allow mandatory VSH_OT_INT
arguments.
* tools/virsh.c: add missing option from the CLI to allows setting
up the NIC model type when attaching an interface
* tools/virsh.pod: extend documentation
* AUTHORS: add Osier Yang to the list
* tools/virsh.c (cmdSetvcpus): Add new flags. Let invalid
commands through to driver, to ease testing of hypervisor argument
validation.
(cmdMaxvcpus, cmdVcpucount): New commands.
(commands): Add new commands.
* tools/virsh.pod (setvcpus, vcpucount, maxvcpus): Document new
behavior.
* docs/formatdomain.html.in: Add memtune element details, added min_guarantee
* src/libvirt.c: Update virDomainGetMemoryParameters api description, make
it more clear that the user first needs to call the api to get the number
of parameters supported and then call again to get the values.
* tools/virsh.pod: Add usage of new command memtune in virsh manpage
* tools/virsh.c (vshCmdOptType): Add VSH_OT_ARGV. Delete
unused VSH_OT_NONE.
(vshCmddefGetData): Special case new opt flag.
(vshCmddefHelp): Display help for argv.
(vshCommandOptArgv): New function.
This makes 'virsh --conn test:///default help help' work right;
previously, the abbreviation confused our hand-rolled option parsing.
* tools/virsh.c (vshParseArgv): Use getopt_long feature, rather
than (incorrectly) reparsing options ourselves.
Some users may type command like this at the virsh shell:
virsh # somecmd 'some arg'
because they often use single quote in linux shell.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Old virsh command parsing mashes all the args back into a string and
miss the quotes, this patches fix it. It is also needed for introducing
qemu-monitor-command which is very useful.
This patches uses the new vshCommandParser abstraction and adds
vshCommandArgvParse() for arguments vector, so we don't need
to mash arguments vector into a command sting.
And the usage was changed:
old:
virsh [options] [commands]
new:
virsh [options]... [<command_string>]
virsh [options]... <command> [args...]
So we still support commands like:
"define D.xml; dumpxml D" was parsed as a commands-string.
and support commands like:
we will not mash them into a string, we use new argv parser for it.
But we don't support the command like:
"define D.xml; dumpxml" was parsed as a command-name, but we have no such command-name.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
add vshCommandParser and make vshCommandParse() accept different
parsers.
the current code for parse command string is integrated as
vshCommandStringParse().
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
in old code the following commands are equivalent:
virsh # dumpxml --update-cpu=vm1
virsh # dumpxml --update-cpu vm1
because the old code split the option argument into 2 parts:
--update-cpu=vm1 is split into update-cpu and vm1,
and update-cpu is a boolean option, so the parser takes vm1 as another
argument, very strange.
after this patch applied, the first one will become illegal.
To achieve this, we don't parse/check options when parsing command sting,
but check options when parsing a command argument. And the argument is
not split when parsing command sting.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
* tools/virsh.c (malloc, calloc, realloc, strdup): Enforce that
within this file, we use the safe vsh wrappers instead.
(cmdNodeListDevices, cmdSnapshotCreate, main): Fix violations of
this policy.
In origin code, double quote is only allowed at the begin or end
"complicated argument"
--some_opt="complicated string" (we split this argument into 2 parts,
option and data, the data is "complicated string").
This patch makes it allow double quote at any position of
an argument:
complicated" argument"
complicated" "argument
--"some opt=complicated string"
This patch is also needed for the following patches,
the following patches will not split option argument into 2 parts,
so we have to allow double quote at any position of an argument.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
The command helps to control the memory/swap parameters for the system, for
eg. hard_limit (max memory the vm can use), soft_limit (limit during memory
contention), swap_hard_limit(max swap the vm can use)
libvirt-guests init script should be started as late as possible during
host startup and stopped as early as possible during host shutdown to
make sure required services are already/still up and running at the time
libvirt-guests runs.
cmdAttachInterface and cmdAttachDisk still used vshRealloc and sprintf
for generating XML, which is hardly maintainable. Let's get rid of this
old code.
Unless --driver tap|file option was given to attach-disk, virsh would
generate <disk type='block'> XML which might be fine for Xen but not for
other hypervisors. This patch introduces a new option --sourcetype which
can be used to explicitly set the type of disk source. The option
accepts either "file" or "block" types.
Virsh shouldn't check for driver support but rather let the backend handled this.
After removing the check, I can successfully attach file-based images to a qemu
VM with attach-disk.
% virsh attach-disk vm2 /images/test02.img vdc --driver qemu --type disk --subdriver raw
Disk attached successfully
This command generates the following XML:
<disk type='block' device='disk'>
<driver name='qemu' type='raw'/>
<source dev='/images/test02.img'/>
<target dev='vdc' bus='virtio'/>
<alias name='virtio-disk2'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/>
</disk>
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Since libvirt-guests init script and its configuration do not require
libvirtd to be running/installed, it was a bad idea to put them into
daemon directory. libvirt.spec even includes these files in
libvirt-client subpackage, which may result in build failure for
client-only builds when the whole daemon directory is just skipped.
it was using atoi direct without checking leading to confusion
in case of flag error for example with -c
* tools/virsh.c: vshParseArgv() use virStrToLong_i and remove the
unchecked atoi used to parse teh parameter
After playing around with virsh setmaxmem for a bit,
I ran into some surprising behavior; if a hypervisor does
not support the virDomainSetMaxMemory() API, but the value
specified for setmaxmem is less than the current amount
of memory in the domain, the domain would be ballooned
down *before* an error was reported.
To make this more consistent, run virDomainSetMaxMemory()
before trying to shrink; that way, if an error is thrown,
no changes to the running domain are made.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The virsh command "setmem" takes as input a number that
should represent an unsigned long number of kilobytes. Fix
cmdSetmem to properly parse this as an unsigned long instead
of an int.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The virsh option error reporting was not being used
consistently; some commands would spit out errors on
missing required options while others would just silently fail.
However, vshCommandOptString knows which ones are required
and which ones aren't, so make it spit out an error where
appropriate. The rest of the patch is just cleaning up
the uses of vshCommandOptString to deal with the new error
reporting.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
This patch removes the individual author names from the libvirtd and virsh
man pages, instead referring to the main AUTHORS file distributed with
libvirt. This approach is needed, as we can't guarantee unicode support
across all versions of pod2man used with libvirt.
Additionally, this patch includes the libvirtd man page in the spec file
used with "make rpm". Without this patch "make rpm" is broken.
When printing out size_t, we need to use %zu to make sure it
will continue to compile on both 32-bit and 64-bit platforms.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
