The multipath pool is documented as not using the volume type,
so let's just remove it.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The iscsi and iscsi-direct pools are documented as not using
the volume type, so let's just remove it. Besides it would
have produced bad output since formatting uses the Disk types.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The scsi pool is documented as not using the volume type,
so let's just remove it.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The rbd pool is documented as not using the volume type,
so let's just remove it.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The sheepdog pool is documented as not using the volume type,
so let's just remove it. Besides it would have produced bad
results since the defaultType is FILE but the formatting used
the Disk types.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Rather than moving the XPath root node in the caller and then still
passing it down, make sure that the callees move the node themselves.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove logic necessary to figure out whether to format the 'features'
element by using virXMLFormatElement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virXMLFormatElement for the formatting which allows us to avoid
looking through the array to see if any feature is enabled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If none of the 'capabilities' features are enabled we'd still format the
opening and closing tag for the <capabilities element.
The implementation is suboptimal but will be refactored for a better
approach. This is done prior to the refactor to show that tests are not
impacted.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use VIR_AUTOCLEAN to avoid leaking the buffer on error path and get rid
of resetting mid loop since virXMLFormatElement does the reset
internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'i' is always in range of the enum, thus the name is always populated by
virDomainFeatureTypeToString.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
These buffers are used temporarily for some of the partial formatters
but not globally. Prefix the name with 'tmp' to be explicit.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Pure code motion of code for formatting domain features to a function
called virDomainDefFormatFeatures. Best viewed with the '--patience'
option for git show.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Split out the code into a separate function named
virDomainDefFormatBlkiotune and use virXMLFormatElement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virXMLFormatElement to format the internals along with simplifying
cleanup code paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virXMLFormatElement to format the internals along with simplifying
cleanup code paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virXMLFormatElement to format the internals along with simplifying
cleanup code paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virXMLFormatElement to format the internals along with simplifying
cleanup code paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virXMLFormatElement to format the internals along with simplifying
cleanup code paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virXMLFormatElement to format the internals along with simplifying
cleanup code paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor the function to use the XML formatting aid and use automatic
cleaning to simplify the control flow.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function does not transfer errors from 'attrBuf' and 'childBuf'
arguments into 'buf', but rather reports them right away, thus we need
to make sure that it's always checked.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemuMigrationParamsApply internal API was designed to apply all
migration parameters and capabilities before we start to migrate a
domain. While migration parameters are only passed to QEMU when we
explicitly want to set a specific value, capabilities are always either
enabled or disabled.
Thus when this API is called outside migration job, e.g., via a call to
qemuDomainMigrateSetMaxSpeed with VIR_DOMAIN_MIGRATE_MAX_SPEED_POSTCOPY
flag, we would call migrate-set-capabilities and disable all
capabilities. However, changing capabilities while migration is already
running does not make sense and our code should never be trying to do
so. In fact QEMU even reports an error if migrate-set-capabilities is
called during migration and qemuDomainMigrateSetMaxSpeed would fail
with:
internal error: unable to execute QEMU command
migrate-set-capabilities: There's a migration process in progress
With this patch qemuMigrationParamsApply never tries to call
migrate-set-capabilities outside of migration job. When the capabilities
bitmap is all zeros (which is its initial value after
qemuMigrationParamsNew), we just skip the command. But when any
capability bit is set to 1 by a non-migration job, we report an error to
highlight a bug in our code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Further testing with more devices showed that we sometimes have a
different depth of pci device paths when accessing sysfs for device
attributes.
But since the access is limited to a set of filenames and read only it
is safe to use a wildcard for that.
Related apparmor denies - while we formerly had only considered:
apparmor="DENIED" operation="open"
name="/sys/devices/pci0000:00/0000:00:02.1/uevent"
requested_mask="r"
We now also know of cases like:
apparmor="DENIED" operation="open"
name="/sys/devices/pci0000:00/0000:00:03.1/0000:1c:00.0/uevent"
requested_mask="r"
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1817943
Acked-by: Jamie Strandboge <jamie@canonical.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Further testing with different devices showed that we need more rules
to drive gl backends with nvidia cards. Related denies look like:
apparmor="DENIED" operation="open"
name="/usr/share/egl/egl_external_platform.d/"
requested_mask="r"
apparmor="DENIED" operation="open"
name="/proc/modules"
requested_mask="r"
apparmor="DENIED" operation="open"
name="/proc/driver/nvidia/params"
requested_mask="r"
apparmor="DENIED" operation="mknod"
name="/dev/nvidiactl"
requested_mask="c"
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1817943
Acked-by: Jamie Strandboge <jamie@canonical.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1685151
This reverts commit e4a969092b.
Now that drivers may call virConnectOpen() on secondary drivers, it
doesn't make much sense to have autostart separated from driver
initialization callback. In fact, it creates a problem because one
driver during its initialization might try to fetch an object from
another driver but since the object is yet to be autostarted the fetch
fails. This has been observed in reality: qemu driver performs
qemuProcessReconnect() during qemu's stateInitialize phase which may
call virDomainDiskTranslateSourcePool() which connects to the storage
driver to look up the volume. But the storage driver did not autostart
its pools yet therefore volume lookup fails and the domain is killed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1685151
This reverts commit cefb97fb81.
The stateAutoStart callback will be removed in the next commit.
Therefore move autostarting of domains, networks and storage
pools back into stateInitialize callbacks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The stateAutoStart callback will go away shortly. Therefore, move
the autostart call into state initialize callback.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The order in which drivers are registered is important because
their stateInitialize and stateAutoStart callback are called in
that order. Well, stateAutoStart is going away and therefore if
there is some dependency between two drivers (e.g. when
initializing storage driver expects secret driver to be available
already), the registration of such drivers must happen in correct
order.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This fixes several CPUs which were incorrectly detected as
Skylake-Client.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This fixes several CPUs which were incorrectly detected as a different
CPU model.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The family/model numbers are nice for humans or for comparing with
/proc/cpuinfo, but sometimes there's a need to see the CPUID
representation of the signature. Let's add it into a comment for each
signature in out cpu_map XMLs as the conversion is not exactly
straightforward.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function exports the functionality of x86DataToSignatureFull and
x86MakeSignature to the test suite.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Most places in qemu_capabilities.c which call virQEMUCapsGetHostCPUData
actually need qemuMonitorCPUModelInfoPtr from QEMU caps. Let's use the
wrapper introduced in the previous commit instead.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is a simple wrapper around virQEMUCapsGetHostCPUData usable in
tests for getting qemuMonitorCPUModelInfoPtr from QEMU caps.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code for transforming qemuMonitorCPUModelInfo data from QEMU into
virCPUDefPtr consumable by virCPU* APIs was hidden inside
virQEMUCapsInitCPUModelX86. This patch moves it into a new function to
make it usable in tests.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The log message may be useful when debugging why a specific CPU model
was selected for a given set of CPUID data.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
