Prefer firmwares specified via --with-loader-nvram configure
option. If none are specified, use the Xen-provided default
firmwares found in LIBXL_FIRMWARE_DIR.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
In libxl driver we do virObjectRef in libxlDomainObjBeginJob,
If virCondWaitUntil failed, it goes to error, do virObjectUnref,
There's a chance that someone undefine the vm at the same time,
and refs unref to zero, vm is freed in libxlDomainObjBeginJob.
But the vm outside function is not Null, we do virObjectUnlock(vm).
That's how we overwrite the vm memory after it's freed. I fix it.
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The virConnectOpenInternal method opens the libvirt client
config file and uses it to resolve things like URI aliases.
There may be driver specific things that are useful to
store in the config file too, so rather than have them
re-parse the same file, pass the virConfPtr down to the
drivers.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Similarly to the domain definition validator add a device validator. The
change to the prototype of the domain validator is necessary as
virDomainDeviceInfoIterateInternal requires a non-const pointer.
Until now we weren't able to add checks that would reject configuration
once accepted by the parser. This patch adds a new callback and
infrastructure to add such checks. In this patch all the places where
rejecting a now-invalid configuration wouldn't be a good idea are marked
with a new parser flag.
Remove the live attribute and mark the definition as transient
whether the domain is runing or not.
There were only two callers left calling with live=false:
* testDomainStartState, where the domain already is active
because we assigned vm->def->id just a few lines above the call
* virDomainObjGetPersistentDef, which now only calls
virDomainObjSetDefTransient for an active domain
Add .domainInterfaceAddresses so that user can have a way to
get domain interface address by 'virsh domifaddr'. Currently
it only supports '--source lease'.
Signed-off: Chunyan Liu <cyliu@suse.com>
Xen only supports network-based disks with the qemu (aka qdisk) driver.
Set the driverName to 'qemu' in libxlDomainDeviceDefPostParse() if
not already set. When starting a domain with network-based disks,
ensure the driverName is 'qemu'.
Resolves: https://bugzilla.opensuse.org/show_bug.cgi?id=981094
Commit id 'f9edcfa4' added cookie manipulation for libxl; however, some
cookie crumb cleanup was missed. Found by Coverity.
In libxlDomainMigrationBegin, the cookie is allocated and baked; however,
the mig ingredients weren't cleaned up.
In libxlDomainMigrationPrepare, when the 'mig' cookie is added to the
args, set the 'mig = NULL'; otherwise, other failure paths between when
the code ate the cookie data and when it was added to args would fail
to clean up the crumbs.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than returning a "char *" indicating perhaps some sized set of
characters that is NUL terminated, alter the function to return 0 or -1
for success/failure and add two parameters to handle returning the
buffer and it's size.
The function no longer encodes the returned secret, rather it returns
the unencoded secret forcing callers to make the necessary adjustments.
Alter the callers to handle the adjusted model.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Call the internal driver callbacks rather than the public APIs to avoid
calling unnecessarily the error dispatching code and don't overwrite
the error messages provided by the APIs. They are good enough to
describe which secret is missing either by UUID or the usage (basically
name).
When probing the <emulator> with '-help' to determine if
it is the old qemu, errors are reported if the emulator
doesn't exist
libvirt: error : internal error: Child process
(/usr/lib/xen/bin/qemu-dm -help) unexpected exit status 127:
libvirt: error : cannot execute binary /usr/lib/xen/bin/qemu-dm:
No such file or directory
Avoid the probe if the specified emulator doesn't exist,
squelching the error. There is no behavior change since
libxlDomainGetEmulatorType() would return
LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN if the probe failed
via virCommandRun().
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Similar to "support Xen migration stream V2 in save/restore",
add support for indicating the migration stream version in
the migration code. To accomplish this, add a minimal migration
cookie in the libxl driver that is passed between source and
destination hosts. Initially, the cookie is only used in
the Begin and Prepare phases of migration to communicate the
version of the migration stream produced by the source.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Xen 4.6 introduced a new migration stream commonly referred to as
"migration V2". Xen 4.6 and newer always produce this new stream,
whereas Xen 4.5 and older always produce the legacy stream.
Support for migration stream V2 can be detected at build time with
LIBXL_HAVE_SRM_V2 from libxl.h. The legacy and V2 streams are not
compatible, but a V2 host can accept and convert a legacy stream.
Commit e7440656 changed the libxl driver to use the lowest libxl
API version possible (version 0x040200) to ensure the driver
builds against older Xen releases. The old 4.2 restore API does
not support specifying a stream version and assumes a legacy
stream, even if the incoming stream is migration V2. Thinking it
has been given a legacy stream, libxl will fail to convert an
incoming stream that is already V2, which causes the entire
restore operation to fail. Xen's libvirt-related OSSTest has been
failing since commit e7440656 landed in libvirt.git master. One
of the more recent failures can be seen here
http://lists.xenproject.org/archives/html/xen-devel/2016-05/msg00071.html
This patch changes the call to libxl_domain_create_restore() to
include the stream version if LIBXL_HAVE_SRM_V2 is defined. The
version field of the libxlSavefileHeader struct is also updated
to '2' when LIBXL_HAVE_SRM_V2 is defined, ensuring the stream
version in the header matches the actual stream version produced
by Xen. Along with bumping the libxl API requirement to 0x040400,
this patch fixes save/restore on a migration V2 Xen host.
Oddly, migration has never used the libxlSavefileHeader. It
handles passing configuration in the Begin and Prepare phases,
and then calls libxl directly to transfer domain state/memory
in the Perform phase. A subsequent patch will add stream
version handling in the Begin and Prepare phase handshaking,
which will fix the migration related OSSTest failures.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
In LIBXL_API_VERSION 0x040400, the libxl_domain_create_restore API
gained a parameter for specifying restore parameters. Switch to
using version 0x040400, which will be useful in a subsequent commit
to specify the Xen migration stream version when restoring.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
To ensure the libvirt libxl driver will build with future versions
of Xen where the libxl API may change in incompatible ways,
explicitly use LIBXL_API_VERSION 0x040200. The libxl driver
does use new libxl APIs that have been added since Xen 4.2, but
currently it does not make use of any changes made to existing
APIs such as libxl_domain_create_restore or libxl_set_vcpuaffinity.
The version can be bumped if/when the libxl driver consumes the
changed APIs.
Further details can be found in the following discussion thread
https://www.redhat.com/archives/libvir-list/2016-April/msg00178.html
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Add codes to support creating domain with network defition of assigning
SRIOV VF from a pool.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
GCC in RHEL-6 complains about listen:
../../src/conf/domain_conf.c:23718: error: declaration of 'listen' shadows a global declaration [-Wshadow]
/usr/include/sys/socket.h:204: error: shadowed declaration is here [-Wshadow]
This renames all the listen to gListen.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In the latest libxenlight code, libxl_domain_create_restore accepts a
new argument. Update libvirt's libxl driver for that. Use the macro
provided by libxenlight to detect which version should be used.
The new parameter (send_back_fd) is set to -1 because libvirt provides
no such fd.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Message-id: 1459866012-27081-1-git-send-email-wei.liu2@citrix.com
Commit id 'fb2bd208' essentially copied the qemuGetSecretString
creating an libxlGetSecretString. Rather than have multiple copies
of the same code, create src/secret/secret_util.{c,h} files and
place the common function in there.
Modify the the build in order to build the module as a library
which is then pulled in by both the qemu and libxl drivers for
usage from both qemu_command.c and libxl_conf.c
Chunyan sent a nice cleanup patch for libxlDomainDetachNetDevice
https://www.redhat.com/archives/libvir-list/2016-March/msg00926.html
which I incorrectly modified before pushing as commit b5534e53. My
modification caused network devices of type hostdev to no longer
be removed. This patch changes b5534e53 to resemble Chunyan's
original, correct patch.
Chunyan sent a correct patch to fix a resource leak on error in
libxlDomainAttachNetDevice
https://www.redhat.com/archives/libvir-list/2016-March/msg00924.html
I made what was thought to be an improvement and pushed the patch as
commit e6336442. As it turns out, my change broke adding net devices
that are actually hostdevs to the list of nets in virDomainDef. This
patch changes e6336442 to resemble Chunyan's original, correct
patch.
Remove disabling domain death events from libxlDomainStart error
path. The domain death event is already disabled in libxlDomainCleanup.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
libxlDomainStart allocates and reserves resources that were not
being released in error paths. libxlDomainCleanup already handles
the job of releasing resources, and libxlDomainStart should call
it when encountering a failure.
Change the error handling logic to call libxlDomainCleanup on
failure. This includes acquiring the lease sooner and allowing
it to be released in libxlDomainCleanup on failure, similar to
the way other resources are reclaimed. With the lease now
released in libxlDomainCleanup, the release_dom label can be
renamed to cleanup_dom to better reflect its changed semantics.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Commit e6336442 changed the 'out:' label to 'cleanup' in
libxlDomainAttachNetDevice(), but missed a comment referencing
the 'out:' label. Remove it from the comment since it is no
longer accurate anyhow.
For those VF allocated from a network pool, we need to set its backend
to be VIR_DOMAIN_HOSTDEV_PCI_BACKEND_XEN so that later work can be
correct.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
When hostdev parent is network device, should call
libxlDomainDetachNetDevice to detach the device from a higher level.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
When AttachNetDevice failed, should call networkReleaseActualDevice
to release actual device, and if actual device is hostdev, should
remove the hostdev from vm->def->hostdevs.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Until now, the libxl driver ignored any <hap> setting in domain XML
and deferred to libxl, which enables hap if not specified. While
this is a good default, it prevents disabling hap if desired.
This change allows disabling hap with <hap state='off'/>. hap is
explicitly enabled with <hap/> or <hap state='on/>. Absense of <hap>
retains current behavior of deferring default state to libxl.
Introduce a helper to check supported device and domain config and move
the memory hotplug checks to it.
The advantage of this approach is that by default all new features are
considered unsupported by all hypervisors unless specifically changed
rather than the previous approach where every hypervisor would need to
declare that a given feature is unsupported.
Original current flag expansion does not filter out non
_CONFIG and _LIVE flags explicitly but they are prohibited
earlier by virCheckFlags.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Flag expansion is the same as in virDomainObjUpdateModificationImpact
which virDomainLiveConfigHelperMethod calls internally. The difference
is merely in implementation. Note that VIR_DOMAIN_MEM_CONFIG is the
same as VIR_DOMAIN_AFFECT_CONFIG. Additionally, the called functions
will properly use flag OR and thus handle the VIR_DOMAIN_MEM_MAXIMUM case.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
libxlDomainPinVcpuFlags calls virDomainLiveConfigHelperMethod which will
call virDomainObjUpdateModificationImpact make the same AFFECT_LIVE flags
and !active check, so remove this duplicated check.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
libxlMakeNic opens a virConnect object and takes a reference on a
virNetwork object, but doesn't drop the references on all error
paths. Rework the function to follow the standard libvirt pattern
of using a local 'ret' variable to hold the function return value,
performing all cleanup and returning 'ret' at a 'cleanup' label.
Introduce support for domainInterfaceStats API call for querying
network interface statistics. Consequently it also enables the use of
`virsh domifstat <dom> <interface name>` command plus seeing the
interfaces names instead of "-" when doing `virsh domiflist <dom>`.
After successful guest creation we fill the network interfaces names
based on domain, device id and append suffix if it's emulated in the
following form: vif<domid>.<devid>[-emu]. We extract the network
interfaces info from the libxl_domain_config object in
libxlDomainCreateIfaceNames() to generate ifname. On domain cleanup we
also clear ifname, in case it was set by libvirt (i.e. being prefixed
with "vif"). We also skip these two steps in case the name of the
interface was manually inserted by the administrator. Since the
introduction of netprefix (commit a040ba9), ifnames with a registered
prefix will be freed on virDomain{Obj,Def}Format*, thus eliminating
the migration issues observed with the reverted commit d2e5538 whereas
source and destination would have the same ifname.
For getting the interface statistics we resort to virNetInterfaceStats
and let libvirt handle the platform specific nits. Note that the
latter is not yet supported in FreeBSD.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
xl/libxl already supports qemu's network-based block backends
such as nbd and rbd. libvirt has supported configuring such
<disk>s for long time too. This patch adds support for rbd
disks in the libxl driver by generating a rbd device URL from
the virDomainDiskDef object. The URL is passed to libxl via the
pdev_path field of libxl_device_disk struct. libxl then passes
the URL to qemu for cosumption by the rbd backend.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This patch introduces keep alive messages support for P2P migration
and it adds two new configuration entries namely 'keepalive_interval'
'keepalive_count' to control it. Behavior of these entries is the
same as qemu driver thus the description is copied from there
with just a few simplifications.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Introduce support for VIR_MIGRATE_PEER2PEER in libvirt migration.
Most of the changes occur at the source and no modifications at
the receiver.
In P2P mode there is only the Perform phase so we must handle the
connection with the destination and actually perform the
migration. libxlDomainPerformP2P implements the connection to the
destination and libxlDoMigrateP2P implements the actual migration
logic with virConnectPtr. In this function we take care of doing
all phases of migration in the destination similar to
virDomainMigrateVersion3Full. We appropriately save the last
error reported in each of the phases to provide proper reporting.
We don't yet support VIR_MIGRATE_TUNNELED and we always use V3
with extensible params, thus it also makes the implementation
simpler.
It is worth noting that the receiver didn't have any changes, and
since it's still the v3 sequence thus it is possible to migrate
from a P2P to non-P2P host.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
The virDomainObjFormat and virDomainSaveStatus methods
both call into virDomainDefFormat, so should be providing
a non-NULL virCapsPtr instance.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Use the newly added virCapabilitiesSetNetPrefix to set
the network prefix for the driver. This in return will
be use by NetDefFormat() and NetDefParseXML() routines
to free any interface name that start with the registered
prefix.
Acked-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
virDomainSaveConfig calls virDomainDefFormat which was setting the caps
to NULL, thus keeping the old behaviour (i.e. not looking at
netprefix). This patch adds the virCapsPtr to the function and allows
the configuration to be saved and skipping interface names that were
registered with virCapabilitiesSetNetPrefix().
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
And use the newly added caps->host.netprefix (if it exists) for
interface names that match the autogenerated target names.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
The current code was a little bit odd. At first we've removed all
possible implicit input devices from domain definition to add them later
back if there was any graphics device defined while parsing XML
description. That's not all, while formating domain definition to XML
description we at first ignore any input devices with bus different to
USB and VIRTIO and few lines later we add implicit input devices to XML.
This seems to me as a lot of code for nothing. This patch may look
to be more complicated than original approach, but this is a preferred
way to modify/add driver specific stuff only in those drivers and not
deal with them in common parsing/formating functions.
The update is to add those implicit input devices into config XML to
follow the real HW configuration visible by guest OS.
There was also inconsistence between our behavior and QEMU's in the way,
that in QEMU there is no way how to disable those implicit input devices
for x86 architecture and they are available always, even without graphics
device. This applies also to XEN hypervisor. VZ driver already does its
part by putting correct implicit devices into live XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
As suggested in a previous thread [0] this patch adds some missing calls
to libxl_dominfo_{init,dispose} when doing some of the libxl_domain_info
operations which would otherwise lead to memory leaks.
[0]
https://www.redhat.com/archives/libvir-list/2015-September/msg00519.html
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
The libxl_device_nic structure supports specifying an outgoing rate
limit based on a time interval and bytes allowed per interval. In xl
config a rate limit is specified as "<RATE>/s@<INTERVAL>". INTERVAL
is optional and defaults to 50ms.
libvirt expresses outgoing limits by average (required), peak, burst,
and floor attributes in units of KB/s. This patch supports the outgoing
bandwidth limit by converting the average KB/s to bytes per interval
based on the same default interval (50ms) used by xl.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This replaces the virPCIKnownStubs string array that was used
internally for stub driver validation.
Advantages:
* possible values are well-defined
* typos in driver names will be detected at compile time
* avoids having several copies of the same string around
* no error checking required when setting / getting value
The names used mirror those in the
virDomainHostdevSubsysPCIBackendType enumeration.
Remove use of xendConfigVersion in the s-expresion config formatter/parser
in src/xenconfig/. Adjust callers in the xen and libxl drivers accordingly.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Remove use of xendConfigVersion in the xm and xl config formatter/parsers
in src/xenconfig/. Adjust callers in the xen and libxl drivers accordingly.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Introduces support for domainGetJobStats which has the same
info as domainGetJobInfo but in a slightly different format.
Another difference is that virDomainGetJobStats can also
retrieve info on the most recently completed job. Though so
far this is only used in the source node to know if the
migration has been completed. But because we don't support
completed jobs we will deliver an error.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Introduce support for domainGetJobInfo to get info about the
ongoing job. If the job is active it will update the
timeElapsed which is computed with the "started" field added to
struct libxlDomainJobObj. For now we support just the very basic
info and all jobs have VIR_DOMAIN_JOB_UNBOUNDED (i.e. no completion
time estimation) plus timeElapsed computed.
Openstack Kilo uses the Job API to monitor live-migration
progress which is currently nonexistent in libxl driver and
therefore leads to a crash in the nova compute node. Right
now, migration doesn't use jobs in the source node and will
return VIR_DOMAIN_JOB_NONE. Though nova handles this case and
will migrate it properly instead of crashing.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
We should make a copy of current definition to preserve a persistent
definition, because we later update the definition with live changes.
The live definition is discarded on domain shutdown and replaced by the
copy we make before starting the domain.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This change ensures to call driver specific post-parse code to modify
domain definition after parsing hypervisor config the same way we do
after parsing XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This reverts commit d2e5538b16.
A migration regression was introduced by this commit. When migrating
a domain, its active XML is sent to the destination libvirtd, where
it is parsed as inactive XML. d2e5538b copied the libxl generated
interface name into the active config, which was being passed to the
migration destination and being parsed into inactive config. Attempting
to start the config could result in failure if an interface with the
same generated name already exists.
The qemu driver behaves similarly, but the parser contains a hack to
skip interface names starting with 'vnet' when parsing inactive XML.
We could extend the hack to skip names starting with 'vif' too, but a
better fix would be to expose these hypervisor-specific interface name
prefixes in capabilities. See the following discussion thread for more
details
https://www.redhat.com/archives/libvir-list/2015-December/msg00262.html
For the pending 1.3.0 release, it is best to revert d2e5538b. It can
be added again post release, after moving the prefix to capabilities.
Introduce support for domainInterfaceStats API call for querying
network interface statistics. Consequently it also enables the
use of `virsh domifstat <dom> <interface name>` command plus
seeing the interfaces names instead of "-" when doing
`virsh domiflist <dom>`.
After successful guest creation we fill the network
interfaces names based on domain, device id and append suffix
if it's emulated in the following form: vif<domid>.<devid>[-emu].
We extract the network interfaces info from the libxl_domain_config
object in libxlDomainCreateIfaceNames() to generate ifname. On domain
cleanup we also clear ifname, in case it was set by libvirt (i.e.
being prefixed with "vif"). We also skip these two steps in case the name
of the interface was manually inserted by the adminstrator.
For getting the interface statistics we resort to virNetInterfaceStats
and let libvirt handle the platform specific nits. Note that the latter
is not yet supported in FreeBSD.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Our domain_conf.* files are big enough. Not only they contain XML
parsing code, but they served as a storage of all functions whose
name is virDomain prefixed. This is just wrong as it gathers not
related functions (and modules) into one big file which is then
harder to maintain. Split virDomainObjList module into a separate
file called virdomainobjlist.[ch].
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 6472e54a unlocks the virDomainObj even if libxlDomainObjEndJob
returns false, indicating that its refcnt has dropped to 0.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Commits b6e19cf4 and 6472e54a missed unref'ing the
libxlDriverConfig object. Add missing calls to virObjectUnref.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Introduce support for domainMemoryStats API call, which
consequently enables the use of `virsh dommemstat` command to
query for memory statistics of a domain. We support
the following statistics: balloon info, available and currently
in use. swap-in, swap-out, major-faults, minor-faults require
cooperation of the guest and thus currently not supported.
We build on the data returned from libxl_domain_info and deliver
it in the virDomainMemoryStat format.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Introduce support for domainGetCPUStats API call and consequently
allow us to use `virsh cpu-stats`. The latter returns a more brief
output than the one provided by`virsh vcpuinfo`.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Since the strtok_r call in libxlCapsInitGuests expects a non NULL first
parameter when the third parameter is NULL, we need to check that
the returned 'capabilities' from a libxl_get_version_info call is
not NULL and error out if so since the code expects it.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=871452
So, you want to create a domain from XML. The domain already
exists in libvirt's database of domains. It's okay, because name
and UUID matches. However, on domain startup, internal
representation of the domain is overwritten with your XML even
though we claim that the XML you've provided is a transient one.
The bug is to be found across nearly all the drivers.
Le sigh.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After attach-device a <hostdev> with --config, new device doesn't
show up in dumpxml and in guest.
To fix that, set dev->data.hostdev = NULL after work so that the
pointer is not freed, since vmdef has the pointer and still need it.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
libxl/libxl_conf.c: In function 'libxlDriverConfigNew':
libxl/libxl_conf.c:1560:30: error: 'log_level' may be used uninitialized
in this function [-Werror=maybe-uninitialized]
Instead of a hardcoded DEBUG log level, use the overall
daemon log level specified in libvirtd.conf when opening
a log stream with libxl. libxl is very verbose when DEBUG
log level is set, resulting in huge log files that can
potentially fill a disk. Control of libxl verbosity should
be placed in the administrator's hands.
commit 4b53d0d4ac "libxl: don't remove persistent domain on start
failure" cleans up the vm object and sets it to NULL if the vm is not
persistent, however at end job vm (now NULL) is dereferenced via the call to
libxlDomainObjEndJob. Avoid this by skipping "endjob" and going
straight to "cleanup" in this case.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Adds a new interface type using UDP sockets, this seems only applicable
to QEMU but have edited tree-wide to support the new interface type.
The interface type required the addition of a "localaddr" (local
address), this then maps into the following xml and qemu call.
<interface type='udp'>
<mac address='52:54:00:5c:67:56'/>
<source address='127.0.0.1' port='11112'>
<local address='127.0.0.1' port='22222'/>
</source>
<model type='virtio'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
</interface>
QEMU call:
-net socket,udp=127.0.0.1:11112,localaddr=127.0.0.1:22222
Notice the xml "local" entry becomes the "localaddr" for the qemu call.
reference:
http://lists.gnu.org/archive/html/qemu-devel/2011-11/msg00629.html
Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Commit f86ae403 moved acquiring a job from libxlDomainStart()
to its callers. One spot missed was in libxlDoMigrateReceive().
Acquire a job in libxlDoMigrateReceive() before calling
libxlDomainStart().
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Failure of libxl_domain_suspend() does not leave the domain in
a suspended state, so no need to call libxl_domain_resume(),
which btw will fail with "domain not suspended".
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This patch fixes some flawed logic around ref counting the
libxlMigrationDstArgs object.
First, when adding sockets to the event loop with
virNetSocketAddIOCallback(), the generic virObjectFreeCallback()
was registered as a free function, with libxlMigrationDstArgs as
its parameter. A reference was also taken on
libxlMigrationDstArgs for each successful call to
virNetSocketAddIOCallback(). The rational behind this logic was
that the libxlMigrationDstArgs object had to out-live the socket
objects. But virNetSocketAddIOCallback() already takes a
reference on socket objects, ensuring their life until removed
from the event loop and unref'ed in virNetSocketEventFree(). We
only need to ensure libxlMigrationDstArgs lives until
libxlDoMigrateReceive() finishes, which can be done by simply
unref'ing libxlMigrationDstArgs at the end of
libxlDoMigrateReceive().
The second flaw was unref'ing the sockets in the failure path of
libxlMigrateReceive() and at the end of libxlDoMigrateReceive().
As mentioned above, the sockets are already unref'ed by
virNetSocketEventFree() when removed from the event loop.
Attempting to unref the socket a second time resulted in a
libvirtd crash since the socket was previously unref'ed and
disposed.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Commit 45697fe5 added dom0 to driver->domains, but missed
setting its state to 'running'
$ virsh list
Id Name State
----------------------------------------------------
0 Domain-0 shut off
Set the state of virDomainObj in the functions that
actually change the domain state, instead of the generic
libxlDomainCleanup function. This approach gives functions
calling libxlDomainCleanup more flexibility wrt when and
how they change virDomainObj state via virDomainObjSetState.
The prior approach of calling virDomainObjSetState in
libxlDomainCleanup resulted in the following incorrect
coding pattern in the various functions that change
domain state
libxlDomain<DoStateTransition>
call libxl function to do state transition
emit lifecycle event
libxlDomainCleanup
virDomainObjSetState
Once simple manifestation of this bug is seeing a domain
running in virt-manager after selecting the shutdown button,
even after the domain has long shutdown.
In Xen, dom0 is really just another domain that supports ballooning,
adding/removing devices, changing vcpu configuration, etc. This patch
adds support to the libxl driver for managing dom0. Note that the
legacy xend driver has long supported managing dom0.
Operations that are not supported on dom0 are filtered in libvirt
where a sensible error is reported. Errors from libxl are not
always helpful. E.g., attempting a save on dom0 results in
2015-06-23 15:25:05 MDT libxl: debug: libxl_dom.c:1570:libxl__toolstack_save: domain=0 toolstack data size=8
2015-06-23 15:25:05 MDT libxl: debug: libxl.c:979:do_libxl_domain_suspend: ao 0x7f7e68000b70: inprogress: poller=0x7f7e68000930, flags=i
2015-06-23 15:25:05 MDT libxl-save-helper: debug: starting save: Success
2015-06-23 15:25:05 MDT xc: detail: xc_domain_save_suse: starting save of domid 0
2015-06-23 15:25:05 MDT xc: error: Couldn't map live_shinfo (3 = No such process): Internal error
2015-06-23 15:25:05 MDT xc: detail: Save exit of domid 0 with errno=3
2015-06-23 15:25:05 MDT libxl-save-helper: debug: complete r=1: No such process
2015-06-23 15:25:05 MDT libxl: error: libxl_dom.c:1876:libxl__xc_domain_save_done: saving domain: domain did not respond to suspend request: No such process
2015-06-23 15:25:05 MDT libxl: error: libxl_dom.c:2033:remus_teardown_done: Remus: failed to teardown device for guest with domid 0, rc -8
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
def->vcpus was never updated after successfully changing the live
vcpu count of a domain. Subsequent queries for vcpu info would
return incorrect results. E.g.:
virsh vcpucount test
maximum config 4
maximum live 4
current config 4
current live 4
virsh setvcpus test 2
virsh vcpucount test
maximum config 4
maximum live 4
current config 4
current live 4
After patch, live current config is reported correctly:
virsh vcpucount test
maximum config 4
maximum live 4
current config 4
current live 2
While fixing this, noticed that the live config was not saved
to cfg->stateDir via virDomainSaveStatus. Save the live config
and change error handling of virDomainSave{Config,Status} to
log a message via VIR_WARN, instead of failing the entire
DomainSetVcpusFlags operation.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The libxl driver always uses virDomainObj->def when formatting
the domain XML description. Use virDomainObj->newDef when
--inactive flag is set.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
libxlDomainCreateXML() would remove a persistent domain if
libxlDomainStart() failed. Check if domain is persistent
before removing.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
When restarting libvirtd and reconnecting to running domains,
libxlReconnectDomain() would unconditionally set the domain state
to VIR_DOMAIN_RUNNING, overwriting the state maintained in
$statedir/<domname>.xml. A domain in a paused state would have
the state changed to running, even though it was actually in a
paused state.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Functions like virDomainOpenConsole() and virDomainOpenChannel() accept
NULL as a dev_name parameter. Try using alias for the error message if
dev_name is not specified.
Before:
error: internal error: character device <null> is not using a PTY
After:
error: internal error: character device serial0 is not using a PTY
Signed-off-by: Luyao Huang <lhuang@redhat.com>
If vm->def->cputune.nvcpupin is 0 in libxlDomainSetVcpuAffinities (as
seems to be the case on arm) then the VIR_FREE after cleanup: would be
operating on an uninitialised pointer in map.map.
Fix this by using libxl_bitmap_init and libxl_bitmap_dispose in the
appropriate places (like VIR_FREE, libxl_bitmap_dispose is also
idempotent, so there is no double free on exit from the loop).
libxl_bitmap_dispose is slightly preferable since it also sets
map.size back to 0, avoiding a potential source of confusion.
This fixes the crashes we've been seeing in the Xen automated tests on
ARM.
I had a glance at the handful of other users of libxl_bitmap and none
of them looked to have a similar issue.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
So that they can format private data (e.g., disk private data) stored
elsewhere in the domain object.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
By default, getaddrinfo() will return addresses for both
IPv4 and IPv6 if both protocols are enabled, and so the
RPC code will listen/connect to both protocols too. There
may be cases where it is desirable to restrict this to
just one of the two protocols, so add an 'int family'
parameter to all the TCP related APIs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The vCPU pinning definition gets removed when the domain definition is
being freed later. If there is no next configuration it would remove the
configured pinning.
In the pre-NUMA ages pinning a vCPU to all pCPUs was eaqual to deleting
the pinning info. Now it does not entirely work that way. Pinning a vCPU
to all pCPUs might be a desired operation. Additionally removal of the
pinning will result into using the default pinning information at the
next boot which might be different from all vcpus.
This patch removes the false assumption that we should remove the
pinning after pinning to all vCPUs and tweaks the documentation for
virsh.
A later patch will implement a new flag for the virDomainPinVcpuFlags
API that will allow to remove the pinning in a sane way.
The libxl tries to check if it's running in dom0 by parsing
/proc/xen/capabilities and if that fails it doesn't load.
There's no procfs interface in Xen on FreeBSD, so this check always
fails.
In addition to checking procfs, check if /dev/xen/xenstored, that's enough to
check if we're running in dom0 in FreeBSD case.
For HVM domains, vfb info must be populated in the libxl_domain_build_info
struct. Currently this is done in the libxlMakeVfbList function, but IMO
it would be cleaner to populate the build_info vfb in a separate
libxlMakeBuildInfoVfb function. libxlMakeVfbList would then handle only
vfb devices, simiar to the other libxlMake<device>List functions.
A future patch will extend libxlMakeBuildInfoVfb to support SPICE.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Most virDomainDiskIndexByName callers do not care about the index; what
they really want is a disk def pointer.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
For some reason a union (_virNodeDevCapData) that had only been
declared inside the toplevel struct virNodeDevCapsDef was being used
as an argument to functions all over the place. Since it was only a
union, the "type" attribute wasn't necessarily sent with it. While
this works, it just seems wrong.
This patch creates a toplevel typedef for virNodeDevCapData and
virNodeDevCapDataPtr, making it a struct that has the type attribute
as a member, along with an anonymous union of everything that used to
be in union _virNodeDevCapData. This way we only have to change the
following:
s/union _virNodeDevCapData */virNodeDevCapDataPtr /
and
s/caps->type/caps->data.type/
This will make me feel less guilty when adding functions that need a
pointer to one of these.
Currently, the libxl driver does not support any security drivers.
When the qemu driver has no security driver configued,
nodeGetSecurityModel succeeds but returns an empty virSecurityModel
object. Do the same in the libxl driver instead of reporting
this function is not supported by the connection driver:
virNodeGetSecurityModel
While implementing support for SPICE, I noticed VNC passwd was
never copied to libxl_device_vfb's vnc.passwd field.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Rearrange code so that the local variable is always initialized and
disposed.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Jim Fehlig <jfehlig@suse.com>
Commit bf32462b missed initializing sdl.opengl. Without the
initialization, libvirtd will be terminated by an assert from libxl:
Assertion `!libxl_defbool_is_default(db)' failed.
Reported-by: Olaf Hering <olaf@aepfle.de>
If the domU configu has sdl enabled libvirtd crashes:
libvirtd[5158]: libvirtd: libxl.c:343: libxl_defbool_val:
Assertion `!libxl_defbool_is_default(db)' failed.
Initialize the relevant defbool variables in libxl_device_vfb.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Jim Fehlig <jfehlig@suse.com>
Every domain that grabs a domain object to work over should
reference it to make sure it won't disappear meanwhile.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Introduce libxl.conf configuration file, adding the 'autoballoon'
setting as the first knob for controlling the libxl driver.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This needs to specified in way too many places for a simple validation
check. The ostype/arch/virttype validation checks later in
DomainDefParseXML should catch most of the cases that this was covering.
A destroy operation can take considerable time on large memory
domains due to scrubbing the domain's memory. Unlock the
virDomainObj while libxl_domain_destroy is executing.
Implement libxlDomainDestroyInternal wrapper to handle unlocking,
calling destroy, and locking. Change all callers of
libxl_domain_destroy to use the wrapper.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
A job should be acquired at the beginning of a domain destroy operation,
not at the end when cleaning up the domain. Fix two occurrences of this
late job acquisition in the libxl driver. Doing so renders
libxlDomainCleanupJob unused, so it is removed.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Let callers of libxlDomainStart decide when it is appropriate to
acquire a job on the associated virDomainObj.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Add support for HVM direct kernel boot in libxl. Also add a
test to verify domXML <-> native conversions.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Recent testing on large memory systems revealed a bug in the Xen xl
tool's freemem() function. When autoballooning is enabled, freemem()
is used to ensure enough memory is available to start a domain,
ballooning dom0 if necessary. When ballooning large amounts of memory
from dom0, freemem() would exceed its self-imposed wait time and
return an error. Meanwhile, dom0 continued to balloon. Starting the
domain later, after sufficient memory was ballooned from dom0, would
succeed. The libvirt implementation in libxlDomainFreeMem() suffers
the same bug since it is modeled after freemem().
In the end, the best place to fix the bug on the Xen side was to
slightly change the behavior of libxl_wait_for_memory_target().
Instead of failing after caller-provided wait_sec, the function now
blocks as long as dom0 memory ballooning is progressing. It will return
failure only when more memory is needed to reach the target and wait_sec
have expired with no progress being made. See xen.git commit fd3aa246.
There was a dicussion on how this would affect other libxl apps like
libvirt
http://lists.xen.org/archives/html/xen-devel/2015-03/msg00739.html
If libvirt containing this patch was build against a Xen containing
the old libxl_wait_for_memory_target() behavior, libxlDomainFreeMem()
will fail after 30 sec and domain creation will be terminated.
Without this patch and with old libxl_wait_for_memory_target() behavior,
libxlDomainFreeMem() does not succeed after 30 sec, but returns success
anyway. Domain creation continues resulting in all sorts of fun stuff
like cpu soft lockups in the guest OS. It was decided to properly fix
libxl_wait_for_memory_target(), and if anything improve the default
behavior of apps using the freemem reference impl in xl.
xl was patched to accommodate the change in libxl_wait_for_memory_target()
with xen.git commit 883b30a0. This patch does the same in the libxl
driver. While at it, I changed the logic to essentially match
freemem() in $xensrc/tools/libxl/xl_cmdimpl.c. It was a bit cleaner
IMO and will make it easier to spot future, potentially interesting
divergences.
Although needed in the Xen 4.1 libxl days, there is no longer any
benefit to having per-domain libxl_ctx. On the contrary, their use
makes the code unecessarily complicated and prone to deadlocks under
load. As suggested by the libxl maintainers, use a single libxl_ctx
as a handle to libxl instead of per-domain ctx's.
One downside to using a single libxl_ctx is there are no longer
per-domain log files for log messages emitted by libxl. Messages
for all domains will be sent to /var/log/libvirt/libxl/libxl-driver.log.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
libxlDomainFreeMem() is only used in libxl_domain.c and thus should
be declared static. While at it, change the signature to take a
libxl_ctx instead of libxlDomainObjPrivatePtr, since only the
libxl_ctx is needed.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This function now only enables domain death events. Simply call
libxl_evenable_domain_death() instead of an unnecessary wrapper.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Informing libxl how to handle its child proceses should be done once
during driver initialization, not once for each domain-specific
libxl_ctx object. The related libxl documentation in
$xen-src/tools/libxl/libxl_event.h even mentions that "it is best to
call this at initialisation".
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Long ago I incorrectly associated libxl fd and timer registrations
with per-domain libxl_ctx objects. When creating a libxlDomainObjPrivate,
a libxl_ctx is allocated, and libxl_osevent_register_hooks is called
passing a pointer to the libxlDomainObjPrivate. When an fd or timer
registration occurred, the registration callback received the
libxlDomainObjPrivate, containing the per-domain libxl_ctx. This
libxl_ctx was then used when informing libxl about fd events or
timer expirations.
The problem with this approach is that fd and timer registrations do not
share the same lifespan as libxlDomainObjPrivate, and hence the per-domain
libxl_ctx ojects. The result is races between per-domain libxl_ctx's being
destoryed and events firing on associated fds/timers, typically manifesting
as an assert in libxl
libxl_internal.h:2788: libxl__ctx_unlock: Assertion `!r' failed
There is no need to associate libxlDomainObjPrivate objects with libxl's
desire to use libvirt's event loop. Instead, the driver-wide libxl_ctx can
be used for the fd and timer registrations.
This patch moves the fd and timer handling code away from the
domain-specific code in libxl_domain.c into libxl_driver.c. While at it,
function names were changed a bit to better describe their purpose.
The unnecessary locking was also removed since the code simply provides a
wrapper over the event loop interface. Indeed the locks may have been
causing some deadlocks when repeatedly creating/destroying muliple domains.
There have also been rumors about such deadlocks during parallel OpenStack
Tempest runs.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This patch adds code that parses and formats configuration for memory
devices.
A simple configuration would be:
<memory model='dimm'>
<target>
<size unit='KiB'>524287</size>
<node>0</node>
</target>
</memory>
A complete configuration of a memory device:
<memory model='dimm'>
<source>
<pagesize unit='KiB'>4096</pagesize>
<nodemask>1-3</nodemask>
</source>
<target>
<size unit='KiB'>524287</size>
<node>1</node>
</target>
</memory>
This patch preemptively forbids use of the <memory> device in individual
drivers so the users are warned right away that the device is not
supported.
Add a XML element that will allow to specify maximum supportable memory
and the count of memory slots to use with memory hotplug.
To avoid possible confusion and misuse of the new element this patch
also explicitly forbids the use of the maxMemory setting in individual
drivers's post parse callbacks. This limitation will be lifted when the
support is implemented.
With the current control flow the post parse callback returned success
right away for fully virtualized VMs. To allow adding additional checks
into the post parse callback tweak the conditions so that the function
doesn't return early except for error cases.
To clarify the original piece of code borrow the wording from the commit
message for the patch that introduced the code.
xen.git commit babeca32 added a pkgconfig file for libxenlight,
allowing libxl apps to determine the location of Xen binaries
such as firmware blobs, device emulator, etc.
This patch adds support for xenlight.pc in the libxl driver, falling
back to the previous configure logic if not found. It introduces
LIBXL_FIRMWARE_DIR and LIBXL_EXECBIN_DIR to define the firmware and
libexec_bin locations. If xenlight.pc does not exist, the defines
are set to the current hardcoded paths. The capabilities'
<emulator> and <loader> elements are updated to use the paths.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
When converting domXML from native, the libxl driver was overwriting
useful errors from the xenconfig parsing code with a useless, generic
error. E.g. "internal error: parsing xm config failed" vs
"internal error: config value usbdevice was malformed". Remove the
redundant (and useless) error reporting in the libxl driver.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Commit 4ab8cd77 added a check requiring input devices to have
a bus type of VIR_DOMAIN_INPUT_BUS_USB, failing to start the
domain otherwise. But virDomainDefParseXML adds implicit mouse
and keyboard if a graphics device is configured. See calls to
virDomainDefMaybeAddInput.
The regression is fixed by removing the check requiring USB input
devices, and skipping non-USB input devices when populating USB
'usbdevice' in libxl_domain_build_info struct.
As pointed out by jtomko in his review of the IOThreads pinning code:
http://www.redhat.com/archives/libvir-list/2015-March/msg00495.html
there are some comments sprinkled in indicating IOThreads were using
the same structure as the VcpuPin code...
This is the first patch of a few that will change the virDomainVcpuPin*
structures and code to just virDomainPin* - starting with the data
structure naming...
As there are two possible approaches to define a domain's memory size -
one used with legacy, non-NUMA VMs configured in the <memory> element
and per-node based approach on NUMA machines - the user needs to make
sure that both are specified correctly in the NUMA case.
To avoid this burden on the user I'd like to replace the NUMA case with
automatic totaling of the memory size. To achieve this I need to replace
direct access to the virDomainMemtune's 'max_balloon' field with
two separate getters depending on the desired size.
The two sizes are needed as:
1) Startup memory size doesn't include memory modules in some
hypervisors.
2) After startup these count as the usable memory size.
Note that the comments for the functions are future aware and document
state that will be present after a few later patches.
It will not be possible to detach such device later. Also improve
logging in such cases.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
A helper that never returns an error and treats bits out of bitmap range
as false.
Use it everywhere we use ignore_value on virBitmapGetBit, or loop over
the bitmap size.
In the old days of a global driver lock, it was necessary to unlock
the driver after a domain restore operation. When the global lock
was removed from the driver, some remnants were left behind in
libxlDomainRestoreFlags. Remove this unneeded (and incorrect) code.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Domain death watch is already disabled in libxlDomainCleanup. No
need to disable it a second and third time.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This implement handling of <backenddomain name=''/> parameter introduced
in previous patch.
Works on Xen >= 4.3, because only there libxl supports setting backend
domain by name. Specifying backend domain by ID or UUID is currently not
supported.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Periodically my Coverity scan will return a checked_return failure
for libxlDomainShutdownThread call to libxlDomainStart. Followed the
libxlAutostartDomain example in order to check the status, emit a
message, and continue on.
When initializing a libxl_domain_build_info struct with
libxl_domain_build_info_init(), VNC is enabled by default. As a
result, VMs configured with no graphics still have VNC enabled.
This behavior is a regression wrt to the legacy Xen driver.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Do not silently ignore its value. LibXL support only one address, so
refuse multiple IPs.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
For stateless, client side drivers, it is never correct to
probe for secondary drivers. It is only ever appropriate to
use the secondary driver that is associated with the
hypervisor in question. As a result the ESX & HyperV drivers
have both been forced to do hacks where they register no-op
drivers for the ones they don't implement.
For stateful, server side drivers, we always just want to
use the same built-in shared driver. The exception is
virtualbox which is really a stateless driver and so wants
to use its own server side secondary drivers. To deal with
this virtualbox has to be built as 3 separate loadable
modules to allow registration to work in the right order.
This can all be simplified by introducing a new struct
recording the precise set of secondary drivers each
hypervisor driver wants
struct _virConnectDriver {
virHypervisorDriverPtr hypervisorDriver;
virInterfaceDriverPtr interfaceDriver;
virNetworkDriverPtr networkDriver;
virNodeDeviceDriverPtr nodeDeviceDriver;
virNWFilterDriverPtr nwfilterDriver;
virSecretDriverPtr secretDriver;
virStorageDriverPtr storageDriver;
};
Instead of registering the hypervisor driver, we now
just register a virConnectDriver instead. This allows
us to remove all probing of secondary drivers. Once we
have chosen the primary driver, we immediately know the
correct secondary drivers to use.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The path to the pty of a Xen PV console is set only in
virDomainOpenConsole. But this is done too late. A call to
virDomainGetXMLDesc done before OpenConsole will not have the path to
the pty, but a call after OpenConsole will.
e.g. of the current issue.
Starting a domain with '<console type="pty"/>'
Then:
virDomainGetXMLDesc():
<devices>
<console type='pty'>
<target type='xen' port='0'/>
</console>
</devices>
virDomainOpenConsole()
virDomainGetXMLDesc():
<devices>
<console type='pty' tty='/dev/pts/30'>
<source path='/dev/pts/30'/>
<target type='xen' port='0'/>
</console>
</devices>
The patch intend to have the TTY path on the first call of GetXMLDesc.
This is done by setting up the path at domain start up instead of in
OpenConsole.
https://bugzilla.redhat.com/show_bug.cgi?id=1170743
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
The virDomainDefineXMLFlags and virDomainCreateXML APIs both
gain new flags allowing them to be told to validate XML.
This updates all the drivers to turn on validation in the
XML parser when the flags are set
Now that xenconfig supports parsing and formatting Xen's
XL config format, integrate it into the libxl driver's
connectDomainXML{From,To}Native functions.
Signed-off-by: Kiarie Kahurani <davidkiarie4@gmail.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The virDomainDefParse* and virDomainDefFormat* methods both
accept the VIR_DOMAIN_XML_* flags defined in the public API,
along with a set of other VIR_DOMAIN_XML_INTERNAL_* flags
defined in domain_conf.c.
This is seriously confusing & error prone for a number of
reasons:
- VIR_DOMAIN_XML_SECURE, VIR_DOMAIN_XML_MIGRATABLE and
VIR_DOMAIN_XML_UPDATE_CPU are only relevant for the
formatting operation
- Some of the VIR_DOMAIN_XML_INTERNAL_* flags only apply
to parse or to format, but not both.
This patch cleanly separates out the flags. There are two
distint VIR_DOMAIN_DEF_PARSE_* and VIR_DOMAIN_DEF_FORMAT_*
flags that are used by the corresponding methods. The
VIR_DOMAIN_XML_* flags received via public API calls must
be converted to the VIR_DOMAIN_DEF_FORMAT_* flags where
needed.
The various calls to virDomainDefParse which hardcoded the
use of the VIR_DOMAIN_XML_INACTIVE flag change to use the
VIR_DOMAIN_DEF_PARSE_INACTIVE flag.
Now that xenconfig supports parsing and formatting Xen's
XL config format, integrate it into the libxl driver's
connectDomainXML{From,To}Native functions.
Signed-off-by: Kiarie Kahurani <davidkiarie4@gmail.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Since virNetworkFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Commit id 'cb88d433' refactored the calling sequence to use a thread;
however, in doing so "lost" the check for if virNetSocketAccept returns
failure. Since other code makes that check, Coverity complains. Although
a false positive, adding back the failure check pacifies Coverity
This patch contains three domain cleanup improvements in the migration
finish phase, ensuring a domain is properly disposed when a failure is
detected or the migration is cancelled.
The check for virDomainObjIsActive is moved to libxlDomainMigrationFinish,
where cleanup can occur if migration failed and the domain is inactive.
The 'cleanup' label was missplaced in libxlDomainMigrationFinish, causing
a migrated domain to remain in the event of an error or cancelled migration.
In cleanup, the domain was not removed from the driver's list of domains.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
During the perform phase of migration, the domain is started on
the dst host in a running state if VIR_MIGRATE_PAUSED flag is not
specified. In the finish phase, the domain is also unpaused if
VIR_MIGRATE_PAUSED flag is unset. I've noticed this second unpause
fails if the domain was already unpaused following the perform phase.
This patch changes the perform phase to always start the domain
paused, and defers unpausing, if requested, to the finish phase.
Unpausing should occur in the finish phase anyhow, where the domain
can be properly destroyed if the perform phase fails and migration
is cancelled.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Moving data reception of the perform phase of migration to a
thread introduces a race with the finish phase, where checking
if the domain is active races with the thread finishing the
perform phase. The race is easily solved by acquiring a job in
the finish phase, which must wait for the perform phase job to
complete.
While wrapping the finish phase in a job, noticed the virDomainObj
was being unlocked in a callee - libxlDomainMigrationFinish. Move
the unlocking to libxlDomainMigrateFinish3Params, where the lock
is acquired.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The libxl driver receives migration data within an IO callback invoked
by the event loop, effectively disabling the event loop while migration
occurs.
This patch moves receving of the migration data to a thread. The
incoming connection is still accepted in the IO callback, but control
is immediately returned to the event loop after spawning the thread.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Specifying an explicit path to pygrub (e.g. BINDIR "/pygrub") only works if
Xen and libvirt happen to be installed to the same prefix. A more flexible
approach is to simply specify "pygrub" which will cause libxl to use the
correct path which it knows (since it is built with the same prefix as pygrub).
This is particular problematic in the Debian packaging, since the Debian Xen
package relocates pygrub into a libexec dir, however I think this change makes
sense upstream.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
On error, libxlMakeDomBuildInfo() frees the caller-provided
libxl_domain_build_info struct embedded in libxl_domain_config,
causing a segfault
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7f9c13020700 (LWP 40988)]
(gdb) bt
0 0x00007f9c162f95b4 in free () from /lib64/libc.so.6
1 0x00007f9c0d0965ad in libxl_bitmap_dispose () from
/usr/lib64/libxenlight.so.4.4
2 0x00007f9c0d0a73bf in libxl_domain_build_info_dispose ()
from /usr/lib64/libxenlight.so.4.4
3 0x00007f9c0d0a7974 in libxl_domain_config_dispose () from
/usr/lib64/libxenlight.so.4.4
4 0x00007f9c0d2e00c5 in libxlDomainStart (driver=0x7f9c0400e4e0,
vm=0x7f9c0412b0d0, start_paused=false, restore_fd=-1) at
libxl/libxl_domain.c:1323
5 0x00007f9c0d2e1d4b in libxlDomainCreateXML (conn=0x7f9c000009a0,...)
at libxl/libxl_driver.c:660
Remove the call to libxl_domain_build_info_dispose() from
libxlMakeDomBuildInfo(). On error, callers will dispose the
libxl_domain_config object, which in turn disposes the build info.
With the introduction of the libxlDomainGetEmulatorType function,
it is trivial to support a user-specfied <emulator> in the libxl
driver. This patch is based loosely on David Scott's old patch
to do the same
https://www.redhat.com/archives/libvir-list/2013-April/msg02119.html
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
To prepare for introducing a single global driver, rename the
virDriver struct to virHypervisorDriver and the registration
API to virRegisterHypervisorDriver()
This started as an investigation into an issue where libvirt (using the
libxl driver) and the Xen host, like an old couple, could not agree on
who is responsible for selecting the VNC port to use.
Things usually (and a bit surprisingly) did work because, just like that
old couple, they had the same idea on what to do by default. However it
was possible that this ended up in a big argument.
The problem is that display information exists in two different places:
in the vfbs list and in the build info. And for launching the device model,
only the latter is used. But that never gets initialized from libvirt. So
Xen allows the device model to select a default port while libvirt thinks
it has told Xen that this is done by libvirt (though the vfbs config).
While fixing that, I made a stab at actually evaluating the configuration
of the video device. So that it is now possible to at least decide between
a Cirrus or standard VGA emulation and to modify the VRAM within certain
limits using libvirt.
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This patch introduces a function to detect whether the specified
emulator is QEMU_XEN or QEMU_XEN_TRADITIONAL. Detection is based on the
string "Options specific to the Xen version:" in '$qemu -help' output.
AFAIK, the only qemu containing that string in help output is the
old Xen fork (aka qemu-dm).
Note:
QEMU_XEN means a qemu that contains support for Xen.
QEMU_XEN_TRADITIONAL means Xen's old forked qemu 0.10.2
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Commit 4dfc34c3 missed copying the user-specified keymap to
libxl_domain_build_info struct when creating a VFB device.
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
There is no need to acquire the driver-wide lock in
libxlDomainDefineXML. When switching to jobs in the libxl
driver, most driver-wide locks were removed. The locking here
was preserved since I mistakenly thought virDomainObjListAdd
needed protection. This is not the case, so remove the
unnecessary locking.
The libxl driver was blindly assigning libvirt's
virDomainLifecycleAction to libxl's libxl_action_on_shutdown, when
in fact the various actions take on different values in these enums.
Introduce helpers to properly map the enum values.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Test suites using the port allocator don't want to have different
behaviour depending on whether a port is in use on the host. Add
a VIR_PORT_ALLOCATOR_SKIP_BIND_CHECK which test suites can use
to skip the bind() test. The port allocator will thus only track
ports in use by the test suite process itself. This is fine when
using the port allocator to generate guest configs which won't
actually be launched
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
With all the changes in my previous foray into this code, I forgot to
remove the libxlDomainEventQueue(driver, event); call inside the
dom == NULL condition.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Coverity noted that all callers to libxlDomainEventQueue() could ensure
the second parameter (event) was true before calling except this case.
As I look at the code and how events are used - it seems that prior to
generating an event for the dom == NULL condition, the resume/suspend
event should be queue'd after the virDomainSaveStatus() call which will
goto cleanup and queue the saved event anyway.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In libxlDomainMigrationPrepare() if the uri_in is false, then
'hostname' is allocated and used "generically" in the routine,
but not freed. Conversely, if uri_in is true, then a uri is
allocated and hostname is set to the uri->hostname value and
likewise generically used.
At function exit, hostname wasn't free'd in the !uri_in path,
so that was added. To just make it clearer on usage the else
path became the call to virURIFree() although I suppose technically
it didn't have to since it would be a call using (NULL)
Commit b55cc5f4e did a shallow copy of libxl_{sdl,vnc}_info from the
domain config to the build info, which resulted in double-freeing
strings contained in the structures during cleanup, which later
resulted in a libvirtd crash. Fix by performing a deep copy of the
structure, VIR_STRDUP'ing embedded strings instead of simply copying
their pointers.
Fixes the following issue reported on the libvirt dev list
https://www.redhat.com/archives/libvir-list/2014-August/msg01112.html
This patch adds support for the QEMU vhost-user feature to libvirt.
vhost-user enables the communication between a QEMU virtual machine
and other userspace process using the Virtio transport protocol.
It uses a char dev (e.g. Unix socket) for the control plane,
while the data plane based on shared memory.
The XML looks like:
<interface type='vhostuser'>
<mac address='52:54:00:3b:83:1a'/>
<source type='unix' path='/tmp/vhost.sock' mode='server'/>
<model type='virtio'/>
</interface>
Signed-off-by: Michele Paolino <m.paolino@virtualopensystems.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Code logic in libxlDomainAttachDeviceFlags and libxlDomainDetachDeviceFlags
is wrong with return value in error cases.
'ret' was being set to 0 if 'flags & VIR_DOMAIN_DEVICE_MODIFY_CONFIG' was
false. Then if something like virDomainDeviceDefParse() failed in the
VIR_DOMAIN_DEVICE_MODIFY_LIVE logic, the error would be reported but the
function would return success.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
This was converted to a typedef in 5a2bd4c917 "conf: more enum
cleanups in "src/conf/domain_conf.h"" causing:
libxl/libxl_conf.c: In function 'libxlDiskSetDiscard':
libxl/libxl_conf.c:724:19: error: conversion to incomplete type
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
In libxlDomainMigrationConfirm(), a transient domain is removed
from the domain list after successful migration. Later in cleanup,
the domain object is unlocked, resulting in a crash
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7fb4208ed700 (LWP 12044)]
0x00007fb4267251e6 in virClassIsDerivedFrom (klass=0xdeadbeef,
parent=0x7fb42830d0c0) at util/virobject.c:169
169 if (klass->magic == parent->magic)
(gdb) bt
0 0x00007fb4267251e6 in virClassIsDerivedFrom (klass=0xdeadbeef,
parent=0x7fb42830d0c0) at util/virobject.c:169
1 0x00007fb42672591b in virObjectIsClass (anyobj=0x7fb4100082b0,
klass=0x7fb42830d0c0) at util/virobject.c:365
2 0x00007fb42672583c in virObjectUnlock (anyobj=0x7fb4100082b0)
at util/virobject.c:338
3 0x00007fb41a8c7d7a in libxlDomainMigrationConfirm (driver=0x7fb4100404c0,
vm=0x7fb4100082b0, flags=1, cancelled=0) at libxl/libxl_migration.c:583
Fix by setting the virDomainObjPtr to NULL after removing it from
the domain list.
During migration, the libxl driver starts a modify job in the
begin phase, ending the job in the confirm phase. This is
essentially VIR_MIGRATE_CHANGE_PROTECTION semantics, but the
driver does not support that flag. Without CHANGE_PROTECTION
support, the job would never be terminated in error conditions
where migrate confirm phase is not executed. Further attempts
to modify the domain would result in failure to acquire a job
after LIBXL_JOB_WAIT_TIME.
Similar to the qemu driver, end the job in the begin phase.
Protecting the domain object across all phases of migration can
be done in a future patch adding CHANGE_PROTECTION support.
In libxlDomainMigrationPrepare(), a new virDomainObj is created
from the incoming domain def and added to the driver's domain
list, but never removed if there are subsequent failures during
the prepare phase.
targethost# virsh list --all
sourcehost# virsh migrate --live dom xen+ssh://targethost/system
error: operation failed: Fail to create socket for incoming migration.
targethost# virsh list --all
error: Failed to list domains
error: name in virGetDomain must not be NULL
After adding code to remove the domain on prepare failure, noticed
that libvirtd crashed due to double free of the virDomainDef. Similar
to the qemu driver, pass a pointer to virDomainDefPtr so it can be set
to NULL once a virDomainObj is created from it.
In the future we might need to track state of individual images. Move
the readonly and shared flags to the virStorageSource struct so that we
can keep them in a per-image basis.
Replace:
if (virBufferError(&buf)) {
virBufferFreeAndReset(&buf);
virReportOOMError();
...
}
with:
if (virBufferCheckError(&buf) < 0)
...
This should not be a functional change (unless some callers
misused the virBuffer APIs - a different error would be reported
then)
So far, we only report an error if formatting the siblings bitmap
in NUMA topology fails.
Be consistent and always report error in virCapabilitiesFormatXML.
Xen PV domains always have a PV console, so add one to the domain
config via post-parse callback if not explicitly specified in
the XML. The legacy Xen driver behaves similarly, causing a
regression when switching to the new Xen toolstack. I.e.
virsh console pv-domain
will no longer work after upgrading a xm/xend stack to xl/libxl.
libxl interface for vcpu pinning is changing in Xen 4.5. Basically,
libxl_set_vcpuaffinity() now wants one more parameter. That is
representative of 'VCPU soft affinity', which libvirt does not use.
To mark such change, the macro LIBXL_HAVE_VCPUINFO_SOFT_AFFINITY is
defined. Use it as a gate and, if present, re-#define the calls from
the old to the new interface, to avoid breaking the build.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
libxl does not support save, restore, or migrate on all architectures,
notably ARM. Detect whether libxl supports these operations using
LIBXL_HAVE_NO_SUSPEND_RESUME. If not supported, drop advertisement of
<migration_features>.
Found by Ian Campbell while improving Xen's OSSTEST infrastructure
http://lists.xen.org/archives/html/xen-devel/2014-06/msg02171.html
Currently, only LXC has hostdev mode 'capabilities' support,
so the other drivers should forbid to define it in XML.
The hostdev mode check is added to devicesPostParseCallback()
for each hypervisor driver.
But there are some drivers lack function devicesPostParseCallback(),
so only add check for qemu, libxl, openvz, uml, xen, xenapi.
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
The libxl driver currently sets the disk backend to
LIBXL_DISK_BACKEND_TAP when <driver name='file'> is specified
in the <disk> config. qdisk should be prefered with this
configuration, otherwise existing configuration such as the
following, which worked with the old Xen driver, will not work
with the libxl driver
<disk type='file' device='cdrom'>
<driver name='file'/>
<source file='/path/to/some/iso'/>
<target dev='hdc' bus='ide'/>
<readonly/>
</disk>
In addition, tap performs poorly compared to qdisk.
Migration code specifies the problematic non-cooperative resume mode
which is a known issue with Xen's libxl [1]. Instead, use the better
supported cooperative mode.
Without this, guests BUG() in xen_irq_resume after failing to bind
still-bound event channels.
[1] http://bugs.xenproject.org/xen/bug/30
Generally, <interface> ... <script> is only supported for
type='ethernet'. Due to the long and pervasive use of
<interface type='bridge'>
...
<script path='foo'/>
</interface>
in Xen domain configuration, it was agreed to allow the use
of <script> with type='bridge' for backwards compatibility. See
the following discussion thread
http://www.redhat.com/archives/libvir-list/2013-April/msg00755.html
This patch limits the use of <script> to interface types ethernet
and bridge, raising an unsupported config error if <script> is
specified for all other interface types.
While at it, use VIR_ERR_CONFIG_UNSUPPORTED instead of
VIR_ERR_INTERNAL_ERROR when reporting unsupported interface types.
There are two places where you'll find info on page sizes. The first
one is under <cpu/> element, where all supported pages sizes are
listed. Then the second one is under each <cell/> element which refers
to concrete NUMA node. At this place, the size of page's pool is
reported. So the capabilities XML looks something like this:
<capabilities>
<host>
<uuid>01281cda-f352-cb11-a9db-e905fe22010c</uuid>
<cpu>
<arch>x86_64</arch>
<model>Westmere</model>
<vendor>Intel</vendor>
<topology sockets='1' cores='1' threads='1'/>
...
<pages unit='KiB' size='4'/>
<pages unit='KiB' size='2048'/>
<pages unit='KiB' size='1048576'/>
</cpu>
...
<topology>
<cells num='4'>
<cell id='0'>
<memory unit='KiB'>4054408</memory>
<pages unit='KiB' size='4'>1013602</pages>
<pages unit='KiB' size='2048'>3</pages>
<pages unit='KiB' size='1048576'>1</pages>
<distances/>
<cpus num='1'>
<cpu id='0' socket_id='0' core_id='0' siblings='0'/>
</cpus>
</cell>
<cell id='1'>
<memory unit='KiB'>4071072</memory>
<pages unit='KiB' size='4'>1017768</pages>
<pages unit='KiB' size='2048'>3</pages>
<pages unit='KiB' size='1048576'>1</pages>
<distances/>
<cpus num='1'>
<cpu id='1' socket_id='0' core_id='0' siblings='1'/>
</cpus>
</cell>
...
</cells>
</topology>
...
</host>
<guest/>
</capabilities>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This simplifies the usage in {libxl,qemu}DomainGetNumaParameters
and it's needed for consistent error reporting in virBitmapFormat.
Also remove the forgotten ATTRIBUTE_NONNULL marker.
This patch adds initial migration support to the libxl driver,
using the VIR_DRV_FEATURE_MIGRATION_PARAMS family of migration
functions.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Introduce a simple libxlDomainDefCheckABIStability() function that
can be used check ABI stability between two virDomainDef objects.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
If user or management application wants to create a guest,
it may be useful to know the cost of internode latencies
before the guest resources are pinned. For example:
<capabilities>
<host>
...
<topology>
<cells num='2'>
<cell id='0'>
<memory unit='KiB'>4004132</memory>
<distances>
<sibling id='0' value='10'/>
<sibling id='1' value='20'/>
</distances>
<cpus num='2'>
<cpu id='0' socket_id='0' core_id='0' siblings='0'/>
<cpu id='2' socket_id='0' core_id='2' siblings='2'/>
</cpus>
</cell>
<cell id='1'>
<memory unit='KiB'>4030064</memory>
<distances>
<sibling id='0' value='20'/>
<sibling id='1' value='10'/>
</distances>
<cpus num='2'>
<cpu id='1' socket_id='0' core_id='0' siblings='1'/>
<cpu id='3' socket_id='0' core_id='2' siblings='3'/>
</cpus>
</cell>
</cells>
</topology>
...
</host>
...
</capabilities>
We can see the distance from node1 to node0 is 20 and within nodes 10.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The 'libxl_domain_config' object is stack allocated which means its
memory contents are undefined. The libxl_domain_config_dispose() call
is only safe if the memory is initialized to a defined state. Not all
code paths which reach libxl_domain_config_dispose() will ensure that
libxl_domain_config_init() is called. Move the libxl_domain_config_init()
call earlier in the function to ensure all codepaths have defined
memory state.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To allow the test suite to creat the XML option object,
move the virDomainXMLOptionNew call into a libxlCreateXMLConf
method.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To make it easier to test, change libxlBuildDomainConfig so
that it takes a virPortAllocatorPtr instead of the larger
libxlDriverPrivatePtr object.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To make it easier to unit test, change libxlBuildDomainConfig
so that it takes 'virDomainDefPtr' and 'libxl_ctx *' objects
as separate parameters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In "src/conf/domain_conf.h" there are many enum declarations. The
cleanup in this header filer was started, but it wasn't enough and
there are many other files that has enum variables declared. So, the
commit was starting to be big. This commit finish the cleanup in this
header file and in other files that has enum variables, parameters,
or functions declared.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
A VIR_DOMAIN_NET_TYPE_HOSTDEV interface device is really a hostdev
device, which is created by the libxl driver in libxlMakePCIList().
There is no need to create a libxl_device_nic for such hostdev
devices, so skip interfaces of type VIR_DOMAIN_NET_TYPE_HOSTDEV in
libxlMakeNicList().
Signed-off-by: Chunyan Liu <cyliu@suse.com>
With xend on the way out, installations may not even have
/usr/sbin/xend, which results in the following error when the
drivers are probed
2014-04-28 18:21:19.271+0000: 22129: error : virCommandWait:2426 :
internal error: Child process (/usr/sbin/xend status) unexpected exit
status 127: libvirt: error : cannot execute binary /usr/sbin/xend:
No such file or directory
Check for existence of /usr/sbin/xend before trying to run it with
the 'status' option.
Currently the driver only exposes the ability to connect to the serial console
of a Xen guest, which doesn't work for a PV guest. Since for an HVM guest the
serial devices are duplicated as consoles it is sufficient to just use the
console devices unconditionally.
Tested with the following bit of config XML:
<domain type='xen'>
...
<devices>
<console type='pty'>
<target type='xen'/>
</console>
</devices>
</domain>
I have observed and tested this on ARM but I believe it also applies to x86 PV
guests.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Clark Laughlin <clark.laughlin@linaro.org>
