Commit Graph

1031 Commits

Author SHA1 Message Date
Ján Tomko
15911ab820 qemuxml2xmltest: add virtio-options test
Add a test case with all the virtio devices we know to demonstrate
the addition of new options.

https://bugzilla.redhat.com/show_bug.cgi?id=1283251

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2017-06-08 16:31:32 +02:00
Ján Tomko
240e443afd qemu: format device-iotlb on intel-iommu command line
Format the device-iotlb attribute.

https://bugzilla.redhat.com/show_bug.cgi?id=1283251

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2017-06-08 16:31:28 +02:00
Ján Tomko
27b187be39 conf: add iotlb attribute to iommu
Add a new iotlb attribute to the iommu device
to control the device IOTLB support for intel-iommu.

https://bugzilla.redhat.com/show_bug.cgi?id=1283251

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2017-06-08 16:31:09 +02:00
Ján Tomko
381e638d81 qemu: format eim on intel-iommu command line
This option turns on extended interrupt mode,
which allows more than 255 vCPUs.

https://bugzilla.redhat.com/show_bug.cgi?id=1451282

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2017-05-26 08:16:29 +02:00
Ján Tomko
dc61d92758 conf: add eim attribute to <iommu><driver>
Add an attribute to control extended interrupt mode.

https://bugzilla.redhat.com/show_bug.cgi?id=1451282

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2017-05-26 08:11:25 +02:00
Andrea Bolognani
bc07101a7c qemu: Use GICv2 for aarch64/virt TCG guests
There are currently some limitations in the emulated GICv3
that make it unsuitable as a default. Use GICv2 instead.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1450433

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
2017-05-16 16:48:30 +02:00
Andrea Bolognani
b24eaf6210 tests: Check default GIC version for aarch64/virt TCG guests
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
2017-05-16 16:48:30 +02:00
Pavel Hrdina
ed99660446 qemu: improve detection of UNIX path generated by libvirt
Currently we consider all UNIX paths with specific prefix as generated
by libvirt, but that's a wrong assumption.  Let's make the detection
better by actually checking whether the whole path matches one of the
paths that we generate or generated in the past.

The UNIX path isn't stored in config XML since libvirt-1.3.1.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1446980

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2017-05-16 11:33:49 +02:00
Ján Tomko
a56914486c qemu: format caching-mode on iommu command line
Format the caching-mode option for the intel-iommu device,
based on its <driver caching> attribute value.

https://bugzilla.redhat.com/show_bug.cgi?id=1427005
2017-05-15 15:44:11 +02:00
Ján Tomko
d12781b47e conf: add caching_mode attribute to iommu device
Add a new attribute to control the caching mode.

https://bugzilla.redhat.com/show_bug.cgi?id=1427005
2017-05-15 15:44:11 +02:00
Ján Tomko
04028a9db9 qemu: format intel-iommu,intremap on the command line
https://bugzilla.redhat.com/show_bug.cgi?id=1427005
2017-05-15 15:44:11 +02:00
Ján Tomko
2020e2c6f2 conf: add <driver intremap> to <iommu>
Add a new attribute to control interrupt remapping.

https://bugzilla.redhat.com/show_bug.cgi?id=1427005
2017-05-15 15:44:11 +02:00
Ján Tomko
6b5c6314b2 qemu: format kernel_irqchip on the command line
Add kernel_irqchip=split/on to the QEMU command line
and a capability that looks for it in query-command-line-options
output. For the 'split' option, use a version check
since it cannot be reasonably probed.

https://bugzilla.redhat.com/show_bug.cgi?id=1427005
2017-05-15 15:44:11 +02:00
Ján Tomko
8023b21a95 conf: add <ioapic driver> to <features>
Add a new <ioapic> element with a driver attribute.

Possible values are qemu and kvm. With 'qemu', the I/O
APIC can be put in the userspace even for KVM domains.

https://bugzilla.redhat.com/show_bug.cgi?id=1427005
2017-05-15 15:41:17 +02:00
Pavel Hrdina
568887a32f qemu: use qemu-xhci USB controller by default for ppc64 and aarch64
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1438682

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Acked-by: Andrea Bolognani <abologna@redhat.com>
2017-04-28 10:47:12 +02:00
Pavel Hrdina
278e70f8f8 qemu: add support for qemu-xhci USB controller
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1438682

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Acked-by: Andrea Bolognani <abologna@redhat.com>
2017-04-28 10:44:36 +02:00
Pavel Hrdina
233f8d0bd4 qemu: use nec-usb-xhci as a default controller for aarch64 if available
This is a USB3 controller and it's a better choice than piix3-uhci.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Acked-by: Andrea Bolognani <abologna@redhat.com>
2017-04-28 10:42:26 +02:00
Jiri Denemark
df13c0b477 qemu: Add support for guest CPU cache
This patch maps /domain/cpu/cache element into -cpu parameters:

- <cache mode='passthrough'/> is translated to host-cache-info=on
- <cache level='3' mode='emulate'/> is transformed into l3-cache=on
- <cache mode='disable'/> is turned in host-cache-info=off,l3-cache=off

Any other <cache> element is forbidden.

The tricky part is detecting whether QEMU supports the CPU properties.

The 'host-cache-info' property is introduced in v2.4.0-1389-ge265e3e480,
earlier QEMU releases enabled host-cache-info by default and had no way
to disable it. If the property is present, it defaults to 'off' for any
QEMU until at least 2.9.0.

The 'l3-cache' property was introduced later by v2.7.0-200-g14c985cffa.
Earlier versions worked as if l3-cache=off was passed. For any QEMU
until at least 2.9.0 l3-cache is 'off' by default.

QEMU 2.9.0 was the first release which supports probing both properties
by running device-list-properties with typename=host-x86_64-cpu. Older
QEMU releases did not support device-list-properties command for CPU
devices. Thus we can't really rely on probing them and we can just use
query-cpu-model-expansion QMP command as a witness.

Because the cache property probing is only reliable for QEMU >= 2.9.0
when both are already supported for quite a few releases, we let QEMU
report an error if a specific cache mode is explicitly requested. The
other mode (or both if a user requested CPU cache to be disabled) is
explicitly turned off for QEMU >= 2.9.0 to avoid any surprises in case
the QEMU defaults change. Any older QEMU already turns them off so not
doing so explicitly does not make any harm.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2017-04-27 22:41:10 +02:00
Martin Kletzander
523c996062 conf, docs: Add support for coalesce setting(s)
We are currently parsing only rx/frames/max because that's the only
value that makes sense for us.  The tun device just added support for
this one and the others are only supported by hardware devices which
we don't need to worry about as the only way we'd pass those to the
domain is using <hostdev/> or <interface type='hostdev'/>.  And in
those cases the guest can modify the settings itself.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2017-04-21 13:34:41 +02:00
Ján Tomko
b003b9781b qemu: do not crash on USB address with no port and invalid bus
Properly error out when the user requests a port from a bus
that does not have a controller present in the domain XML.

https://bugzilla.redhat.com/show_bug.cgi?id=1441589
2017-04-13 10:45:28 +02:00
Pavel Hrdina
e6e26a899d tests: unify qemu binary paths for all qemu related tests
Our test data used a lot of different qemu binary paths and some
of them were based on downstream systems.

Note that there is one file where I had to add "accel=kvm" because
the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm".

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2017-04-11 14:06:47 +02:00
Pavel Hrdina
e9a85a6e4f tests: don't use different QEMU binary paths for different virt types
The virt type for QEMU can be modified by -machine attribute "accel"
so there is no need to have different QEMU binary paths.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2017-04-11 14:06:47 +02:00
Pavel Hrdina
2bc7600c33 tests/qemuxml2argvtest: remove unnecessary machine canonicalization
This is not required to run our tests.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2017-04-11 14:06:47 +02:00
Erik Skultety
c3272e5e12 qemu: Add device id for mediated devices on qemu command line
Like all devices, add the 'id' option for mdevs as well. Patch also
adjusts the test accordingly.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1438431

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2017-04-04 08:15:43 +02:00
Andrea Bolognani
deb38c4503 tests: Test ACPI, UEFI requirements
Make sure every combination of ACPI and UEFI works, or fails to
work, as expected.
2017-04-03 10:58:00 +02:00
Andrea Bolognani
396ca36cb0 qemu: Enforce ACPI, UEFI requirements
Depending on the architecture, requirements for ACPI and UEFI can
be different; more specifically, while on x86 UEFI requires ACPI,
on aarch64 it's the other way around.

Enforce these requirements when validating the domain, and make
the error message more accurate by mentioning that they're not
necessarily applicable to all architectures.

Several aarch64 test cases had to be tweaked because they would
have failed the validation step otherwise.
2017-04-03 10:58:00 +02:00
Andrea Bolognani
560335c35c qemu: Advertise ACPI support for aarch64 guests
So far, libvirt has assumed that only x86 supports ACPI,
but that's inaccurate since aarch64 supports it too.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1429509
2017-04-03 10:58:00 +02:00
Andrea Bolognani
1cf3e52abb tests: Initialize basic capabilities properly
The capabilities used in test cases should match those used
during normal operation for the tests to make any sense.

This results in the generated command line for a few test
cases (most notably non-x86 test cases that were wrongly
assuming they could use -no-acpi) changing.
2017-04-03 10:58:00 +02:00
Andrea Bolognani
4b67e7a377 Revert "qemu: Forbid <memoryBacking><locked> without <memtune><hard_limit>"
This reverts commit c2e60ad0e5.

Turns out this check is excessively strict: there are ways
other than <memtune><hard_limit> to raise the memory locking
limit for QEMU processes, one prominent example being
tweaking /etc/security/limits.conf.

Partially-resolves: https://bugzilla.redhat.com/1431793
2017-03-28 10:44:25 +02:00
Jiri Denemark
7373c4e48f qemu: Add support for setting TSC frequency
QEMU allows for TSC frequency to be explicitly set to enable migration
with invtsc (migration fails if the destination QEMU cannot set the
exact same frequency used when starting the domain on the source host).

Libvirt already supports setting the TSC frequency in the XML using

    <clock>
      <timer name='tsc' frequency='1234567890'/>
    </clock>

which will be transformed into

    -cpu Model,tsc-frequency=1234567890

QEMU command line.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2017-03-27 20:16:32 +02:00
Erik Skultety
1696806ff1 test: Add some test cases for our test suite regarding the mdevs
For now, these only cover the unmanaged, i.e. user pre-created devices.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2017-03-27 15:39:35 +02:00
Jiri Denemark
fcd56ce866 qemu: Set default values for CPU check attribute
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2017-03-17 11:50:48 +01:00
Andrea Bolognani
96f54b86d6 tests: Test generic PCIe Root Ports
We want pcie-root-ports to be used when available in QEMU,
but at the same time we need to ensure that hosts running
older QEMU releases keep working and that the user can
override the default at any time.

Add a comment for the original pcie-root-port test cases
to make it clear how these new test cases are different.
2017-03-17 10:06:11 +01:00
Michal Privoznik
e433546bef qemu: Introduce label-size for NVDIMMs
For NVDIMM devices it is optionally possible to specify the size
of internal storage for namespaces. Namespaces are a feature that
allows users to partition the NVDIMM for different uses.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-03-15 14:39:22 +01:00
Michal Privoznik
04dc668a31 qemu: Implement @access for <memory/> banks
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-03-15 14:20:18 +01:00
Michal Privoznik
80af11d3dd conf: Introduce @access to <memory/>
Now that NVDIMM has found its way into libvirt, users might want
to fine tune some settings for each module separately. One such
setting is 'share=on|off' for the memory-backend-file object.
This setting - just like its name suggest already - enables
sharing the nvdimm module with other applications. Under the hood
it controls whether qemu mmaps() the file as MAP_PRIVATE or
MAP_SHARED.

Yet again, we have such config knob in domain XML, but it's just
an attribute to numa <cell/>. This does not give fine enough
tuning on per-memdevice basis so we need to have the attribute
for each device too.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-03-15 14:18:58 +01:00
Michal Privoznik
1bc173199e qemu: Implement NVDIMM
So, majority of the code is just ready as-is. Well, with one
slight change: differentiate between dimm and nvdimm in places
like device alias generation, generating the command line and so
on.

Speaking of the command line, we also need to append 'nvdimm=on'
to the '-machine' argument so that the nvdimm feature is
advertised in the ACPI tables properly.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-03-15 14:16:32 +01:00
Michal Privoznik
b4e8a49f8d Introduce NVDIMM memory model
NVDIMM is new type of memory introduced into QEMU 2.6. The idea
is that we have a Non-Volatile memory module that keeps the data
persistent across domain reboots.

At the domain XML level, we already have some representation of
'dimm' modules. Long story short, NVDIMM will utilize the
existing <memory/> element that lives under <devices/> by adding
a new attribute 'nvdimm' to the existing @model and introduce a
new <path/> element for <source/> while reusing other fields. The
resulting XML would appear as:

    <memory model='nvdimm'>
      <source>
        <path>/tmp/nvdimm</path>
      </source>
      <target>
        <size unit='KiB'>523264</size>
        <node>0</node>
      </target>
      <address type='dimm' slot='0'/>
    </memory>

So far, this is just a XML parser/formatter extension. QEMU
driver implementation is in the next commit.

For more info on NVDIMM visit the following web page:

    http://pmem.io/

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-03-15 13:30:58 +01:00
Laine Stump
66c806009d test: fix pcie-root-port-too-many test
While reviewing a patch from Andrea that modified this test case, I
realized that although it was "properly failing" (it's a negative
test), that it was failing for the wrong reason (the MULTIFUNCTION cap
wasn't set in the test case, so it was saying that multifunction=on
wasn't supported by the QEMU binary; instead it should have been
complaining that it had run out of PCI slots of the appropriate type
and couldn't automatically add any more).

This improper failure had started when I added the patch to
automatically aggregate pcie-root-ports onto multiple functions of
each pcie-root slot, but I hadn't noticed it because the test still
failed.

This patch corrects the test case to 1) set the MULTIFUNCTION flag in
the caps, and 2) attempt to add 241 pcie-root-ports to a domain. Since
there are 30 slots available on a pcie-root (slot 0 is reserved, and
slot 31 is used by the integrated SATA controller), and a
pcie-root-port can only be placed on a function of a slot on
pcie-root, the maximum number of pcie-root-ports in any domain is 240.
2017-03-03 12:15:32 -05:00
Andrea Bolognani
3a37af1e41 tests: Fix aliases for pSeries buses
virQEMUCapsHasPCIMultiBus() performs a version check on
the QEMU binary to figure out whether multiple buses are
supported, so to get the correct aliases assigned when
dealing with pSeries guests we need to spoof the version
accordingly in the test suite.
2017-03-03 12:55:13 +01:00
Pavel Hrdina
824272cb28 qemu: properly escape socket path for graphics
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1352529

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2017-02-24 12:58:51 +01:00
Andrea Bolognani
38dc0f6782 tests: Sync tests between qemuxml2argv and qemuxml2xml
In some cases, only one of the two transformations was
checked; in other cases, the capabilities set differed.
2017-02-24 11:18:07 +01:00
Andrea Bolognani
d4393c4293 tests: Reduce usage of legacy PCI controllers on PCIe machines
Up until a while ago, libvirt would automatically add a legacy
PCI controllers combo (dmi-to-pci-bridge + pci-bridge) to any
PCIe machine type (x86_64/q35 and aarch64/virt).

As a result, a number of input and output files in the test
suite ended up containing the legacy PCI controllers, even
though they are not needed or in any way relevant to the
feature being tested.

Get rid of most of the occurrences. Most of the time, this
just means removing the controllers from the input file and
regenerating the output files; in a few instances, some
minor tweaking is performed on the input file, most notably
removing the memory balloon: as memory balloon support was
not the scope of the test being changed, there is no loss
of test coverage from doing so.

Several occurrences of the legacy PCI controllers remain in
the test suite, both because removing their usage would have
required even more tweaking, and because we still want to
have coverage of this perfectly valid combination.
2017-02-22 18:55:55 +01:00
Marc-André Lureau
e5bda10141 qemu: add rendernode argument
Add a new attribute 'rendernode' to <gl> spice element.

Give it to QEMU if qemu supports it (queued for 2.9).

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-02-17 15:47:58 +01:00
Ján Tomko
723fef99c0 qemu: enforce maximum ports value for nec-xhci
This controller only allows up to 15 ports.

https://bugzilla.redhat.com/show_bug.cgi?id=1375417
2017-02-13 16:34:09 +01:00
Ján Tomko
384504f7ba qemu: assign USB port on a selected hub for all devices
Due to a logic error, the autofilling of USB port when a bus is
specified:
    <address type='usb' bus='0'/>
does not work for non-hub devices on domain startup.

Fix the logic in qemuDomainAssignUSBPortsIterator to also
assign ports for USB addresses that do not yet have one.

https://bugzilla.redhat.com/show_bug.cgi?id=1374128
2017-02-13 09:46:15 +01:00
Jaroslav Safka
1c4f3b56f8 qemu: Add args generation for file memory backing
This patch add support for file memory backing on numa topology.

The specified access mode in memoryBacking can be overriden
by specifying token memAccess in numa cell.
2017-02-09 14:27:19 +01:00
Jaroslav Safka
bc6d3121a4 conf: Add new xml elements for file memorybacking support
This part introduces new xml elements for file based
memorybacking support and their parsing.
(It allows vhost-user to be used without hugepages.)

New xml elements:
<memoryBacking>
  <source type="file|anonymous"/>
  <access mode="shared|private"/>
  <allocation mode="immediate|ondemand"/>
</memoryBacking>
2017-02-09 14:27:19 +01:00
Andrea Bolognani
c2e60ad0e5 qemu: Forbid <memoryBacking><locked> without <memtune><hard_limit>
In order for memory locking to work, the hard limit on memory
locking (and usage) has to be set appropriately by the user.

The documentation mentions the requirement already: with this
patch, it's going to be enforced by runtime checks as well,
by forbidding a non-compliant guest from being defined as well
as edited and started.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1316774
2017-02-07 18:43:10 +01:00
Ján Tomko
3ac97c2ded qemu: Add enough USB hubs to accomodate all devices
Commit 815d98a started auto-adding one hub if there are more USB devices
than available USB ports.

This was a strange choice, since there might be even more devices.
Before USB address allocation was implemented in libvirt, QEMU
automatically added a new USB hub if the old one was full.

Adjust the logic to try adding as many hubs as will be needed
to plug in all the specified devices.

https://bugzilla.redhat.com/show_bug.cgi?id=1410188
2017-01-31 13:09:08 +01:00
Michal Privoznik
b020cf73fe domain_conf: Introduce <mtu/> to <interface/>
So far we allow to set MTU for libvirt networks. However, not all
domain interfaces have to be plugged into a libvirt network and
even if they are, they might want to have a different MTU (e.g.
for testing purposes).

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-01-26 09:59:56 +01:00
Laine Stump
147ebe6ddf conf: aggregate multiple pcie-root-ports onto a single slot
Set the VIR_PCI_CONNECT_AGGREGATE_SLOT flag for pcie-root-ports so
that they will be assigned to all the functions on a slot.

Some qemu test case outputs had to be adjusted due to the
pcie-root-ports now being put on multiple functions.
2017-01-11 04:45:57 -05:00
Laine Stump
8f4008713a qemu: use virDomainPCIAddressSetAllMulti() to set multi when needed
If there are multiple devices assigned to the different functions of a
single PCI slot, they will not work properly if the device at function
0 doesn't have its "multi" attribute turned on, so it makes sense for
libvirt to turn it on during PCI address assignment. Setting multi
then assures that the new setting is stored in the config (so it will
be used next time the domain is started), preventing any potential
problems in the case that a future change in the configuration
eliminates the devices on all non-0 functions (multi will still be set
for function 0 even though it is the only function in use on the slot,
which has no useful purpose, but also doesn't cause any problems).

(NB: If we were to instead just decide on the setting for
multifunction at runtime, a later removal of the non-0 functions of a
slot would result in a silent change in the guest ABI for the
remaining device on function 0 (although it may seem like an
inconsequential guest ABI change, it *is* a guest ABI change to turn
off the multi bit).)
2017-01-11 04:42:08 -05:00
Andrea Bolognani
1d8454639f qemu: Use virtio-pci by default for mach-virt guests
virtio-pci is the way forward for aarch64 guests: it's faster
and less alien to people coming from other architectures.
Now that guest support is finally getting there (Fedora 24,
CentOS 7.3, Ubuntu 16.04 and Debian testing all support
virtio-pci out of the box), we'd like to start using it by
default instead of virtio-mmio.

Users and applications can already opt-in by explicitly using

  <address type='pci'/>

inside the relevant elements, but that's kind of cumbersome and
requires all users and management applications to adapt, which
we'd really like to avoid.

What we can do instead is use virtio-mmio only if the guest
already has at least one virtio-mmio device, and use virtio-pci
in all other situations.

That means existing virtio-mmio guests will keep using the old
addressing scheme, and new guests will automatically be created
using virtio-pci instead. Users can still override the default
in either direction.

Existing tests such as aarch64-aavmf-virtio-mmio and
aarch64-virtio-pci-default already cover all possible
scenarios, so no additions to the test suites are necessary.
2017-01-10 12:33:53 +01:00
Maxim Nestratov
245d9ba21e tests: Add "no-kvm-pit-device" testcase
Add a test case for when the QEMU_CAPS_NO_KVM_PIT capability is set.
This capability is mutually exclusive to QEMU_CAPS_KVM_PIT_TICK_POLICY
and results in the same output regardless of whether "discard" or
"delay" was specified in the guest XML for 'tickpolicy'.

Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
2017-01-06 18:27:06 -05:00
Maxim Nestratov
af78cb0486 qemu: Allow to specify pit timer tick policy=discard
Separate out the "policy=discard" into it's own specific
qemu command line.

We'll rename "kvm-pit-device" test case to be "kvm-pit-discard"
since it has the syntax we'd be using.

Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
2017-01-06 18:27:06 -05:00
Maxim Nestratov
ef5c8bb412 qemu: Fix pit timer tick policy=delay
By a mistake, for the VIR_DOMAIN_TIMER_TICKPOLICY_DELAY qemu
command line creation, 'discard' was used instead of 'delay'
in commit id '1569fa14'.

Test "kvm-pit-delay" is fixed accordingly to show the correct
option being generated.

Remove the (now) redundant kvm-pit-device tests. As it turns
out there is no need to specify both QEMU_CAPS_NO_KVM_PIT and
QEMU_CAPS_KVM_PIT_TICK_POLICY since they are mutually exclusive
and "kvm-pit-device" becomes just the same as "kvm-pit-delay".

Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
2017-01-06 18:27:06 -05:00
Collin L. Walling
d47db7b16d qemu: command: Support new cpu feature argument syntax
Qemu has abandoned the +/-feature syntax in favor of key=value. Some
architectures (s390) do not support +/-feature. So we update libvirt to handle
both formats.

If we detect a sufficiently new Qemu (indicated by support for qmp
query-cpu-model-expansion) we use key=value else we fall back to +/-feature.

Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
2017-01-06 12:24:57 +01:00
Jason J. Herne
27e411fa83 tests: qemuxml2argv s390x cpu model
Test cases for qemu s390x cpu model argument generation.

Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
2017-01-06 12:24:57 +01:00
Marc Hartmayer
86fd4e305e tests: Add tests for disk configuration validation
Add tests for controller based disks to check disk address compatibility
with disk bus types.

Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
2016-12-20 11:34:30 +01:00
Michal Privoznik
f55afd83b1 qemu: Create hugepage path on per domain basis
If you've ever tried running a huge page backed guest under
different user than in qemu.conf, you probably failed. Problem is
even though we have corresponding APIs in the security drivers,
there's no implementation and thus we don't relabel the huge page
path. But even if we did, so far all of the domains share the
same path:

   /hugepageMount/libvirt/qemu

Our only option there would be to set 0777 mode on the qemu dir
which is totally unsafe. Therefore, we can create dir on
per-domain basis, i.e.:

   /hugepageMount/libvirt/qemu/domainName

and chown domainName dir to the user that domain is configured to
run under.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-12-08 15:45:52 +01:00
John Ferlan
1ff38366b8 qemu: Add the group name option to the iotune command line
Add in the block I/O throttling group parameter to the command line
if supported. If not supported, fail command creation.

Add the xml2argvtest for testing.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-12-05 18:30:38 -05:00
John Ferlan
32d99cb772 conf: Add support for blkiotune group_name option
Modify _virDomainBlockIoTuneInfo and rng schema to support the group_name
option for iotune throttling. Document the new value.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-12-05 18:30:34 -05:00
Marc Hartmayer
36d9965af0 tests: add test cases for address conflicts
Add test cases for address conflicts between disks and hostdevs that are
using drive addresses.

Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
2016-12-05 10:45:46 +01:00
Marc Hartmayer
b39d3a7eb6 tests: don't use duplicate disk addresses
Don't use duplicate disk addresses in test cases unless it's useful. At
least the test case will break once we have a check for uniqueness of
addresses at time of domain definition.

Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
2016-12-05 10:45:46 +01:00
Ján Tomko
2650d5e1f5 qemu: error out on USB ports out of range
My overly sophisticated address reservation code forgot
to add an error message for user-requested ports out of range.

https://bugzilla.redhat.com/show_bug.cgi?id=1399260
2016-11-30 10:59:01 +01:00
Ján Tomko
a101588921 tests: Fix USB ports in usb-redir-filter
This test case references ports 4 and 5 on the PIIX3 UHCI
controller which only has two.
2016-11-30 10:59:01 +01:00
Eric Farman
ae5d30a0b3 conf: Wire up the vhost-scsi connection from/to XML
With the QEMU components in place, provide the XML parsing to
invoke that code when given the following XML snippet:

    <hostdev mode='subsystem' type='scsi_host'>
      <source protocol='vhost' wwpn='naa.501234567890abcd'/>
    </hostdev>

An optional address element can be specified within the hostdev
(pick CCW or PCI as necessary):

    <address type='ccw' cssid='0xfe' ssid='0x0' devno='0x0625'/>
    <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>

Add basic vhost-scsi tests which were cloned from hostdev-scsi-virtio-scsi
in both xml2argv and xml2xml. Added ones for both vhost-scsi-ccw and
vhost-scsi-pci since the syntaxes are slightly different between them.

Also adjusted the docs to describe the changes.

Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
2016-11-24 12:22:25 -05:00
Laine Stump
70d15c9ac6 qemu: initially reserve one open pcie-root-port for hotplug
For machinetypes with a pci-root bus (all legacy PCI), libvirt will
make a "fake" reservation for one extra slot prior to assigning
addresses to unaddressed PCI endpoint devices in the domain. This will
trigger auto-adding of a pci-bridge for the final device to be
assigned an address *if that device would have otherwise instead been
the last device on the last available pci-bridge*; thus it assures
that there will always be at least one slot left open in the domain's
bus topology for expansion (which is important both for hotplug (since
a new pci-bridge can't be added while the guest is running) as well as
for offline additions to the config (since adding a new device might
otherwise in some cases require re-addressing existing devices, which
we want to avoid)).

It's important to note that for the above case (legacy PCI), we must
check for the special case of all slots on all buses being occupied
*prior to assigning any addresses*, and avoid attempting to reserve
the extra address in that case, because there is no free address in
the existing topology, so no place to auto-add a pci-bridge for
expansion (i.e. it would always fail anyway). Since that condition can
only be reached by manual intervention, this is acceptable.

For machinetypes with pcie-root (Q35, aarch64 virt), libvirt's
methodology for automatically expanding the bus topology is different
- pcie-root-ports are plugged into slots (soon to be functions) of
pcie-root as needed, and the new endpoint devices are assigned to the
single slot in each pcie-root-port. This is done so that the devices
are, by default, hotpluggable (the slots of pcie-root don't support
hotplug, but the single slot of the pcie-root-port does). Since
pcie-root-ports can only be plugged into pcie-root, and we don't
auto-assign endpoint devices to the pcie-root slots, this means
topology expansion doesn't compete with endpoint devices for slots, so
we don't need to worry about checking for all "useful" slots being
free *prior* to assigning addresses to new endpoint devices - as a
matter of fact, if we attempt to reserve the open slots before the
used slots, it can lead to errors.

Instead this patch just reserves one slot for a "future potential"
PCIe device after doing the assignment for actual devices, but only
if the only PCI controller defined prior to starting address
assignment was pcie-root, and only if we auto-added at least one PCI
controller during address assignment. This assures two things:

1) that reserving the open slots will only be done when the domain is
   initially defined, never at any time after, and

2) that if the user understands enough about PCI controllers that they
   are adding them manually, that we don't mess up their plan by
   adding extras - if they know enough to add one pcie-root-port, or
   to manually assign addresses such that no pcie-root-ports are
   needed, they know enough to add extra pcie-root-ports if they want
   them (this could be called the "libguestfs clause", since
   libguestfs needs to be able to create domains with as few
   devices/controllers as possible).

This is set to reserve a single free port for now, but could be
increased in the future if public sentiment goes in that direction
(it's easy to increase later, but essentially impossible to decrease)
2016-11-14 14:23:48 -05:00
Laine Stump
8d873a5a47 qemu: try to put ich9 sound device at 00:1B.0
Real Q35 hardware has an ICH9 chip that includes several integrated
devices at particular addresses (see the file docs/q35-chipset.cfg in
the qemu source). libvirt already attempts to put the first two sets
of ich9 USB2 controllers it finds at 00:1D.* and 00:1A.* to match the
real hardware. This patch does the same for the ich9 "HD audio"
device.

The main inspiration for this patch is that currently the *only*
device in a reasonable "workstation" type virtual machine config that
requires a legacy PCI slot is the audio device, Without this patch,
the standard Q35 machine created by virt-manager will have a
dmi-to-pci-bridge and a pci-bridge just for the sound device; with the
patch (and if you change the sound device model from the default
"ich6" to "ich9"), the machine definition constructed by virt-manager
has absolutely no legacy PCI controllers - any legacy PCI devices
(e.g. video and sound) are on pcie-root as integrated devices.
2016-11-14 14:23:01 -05:00
Laine Stump
d8bd837669 qemu: add a USB3 controller to Q35 domains by default
Previously we added a set of EHCI+UHCI controllers to Q35 machines to
mimic real hardware as closely as possible, but recent discussions
have pointed out that the nec-usb-xhci (USB3) controller is much more
virtualization-friendly (uses less CPU), so this patch switches the
default for Q35 machinetypes to add an XHCI instead (if it's
supported, which it of course *will* be).

Since none of the existing test cases left out USB controllers in the
input XML, a new Q35 test case was added which has *no* devices, so
ends up with only the defaults always put in by qemu, plus those added
by libvirt.
2016-11-14 14:22:23 -05:00
Laine Stump
807232203a qemu: don't force-add a dmi-to-pci-bridge just on principle
Now the a dmi-to-pci-bridge is automatically added just as it's needed
(when a pci-bridge is being added), we no longer have any need to
force-add one to every single Q35 domain.
2016-11-14 14:21:43 -05:00
Laine Stump
815b51d97a qemu: update tests to not assume dmi-to-pci-bridge is always added
A few of the qemu test cases assume that a dmi-to-pci-bridge will
always be added at index 1, and so they omit it from the input data
even though a pci-bridge is present at index 2, e.g.:

   <controller type='pci' index='0' model='pcie-root'/>
   <controller type='pci' index='2' model='pci-bridge'/>

Support for this odd practice was discussed on libvir-list and we
decided that the complex code required to make this continue was not
worth the headache of maintaining. So instead, this patch modifies the
test cases to manually add a dmi-to-pci-bridge at index 1 (since an
upcoming patch is going to eliminate the unconditional adding of
dmi-to-pci-bridge).

Because the auto-add was placing the dmi-to-pci-bridge later in the
list (even though it has a lower index) the test output is also
updated to take account for the new order (which puts the pci
controllers in index-order)
2016-11-14 14:21:15 -05:00
Laine Stump
0702f48ef4 qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed
Previously libvirt would only add pci-bridge devices automatically
when an address was requested for a device that required a legacy PCI
slot and none was available. This patch expands that support to
dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a
machine with a pcie-root), and pcie-root-port (which is needed to add
a hotpluggable PCIe device). It does *not* automatically add
pcie-switch-upstream-ports or pcie-switch-downstream-ports (and
currently there are no plans for that).

Given the existing code to auto-add pci-bridge devices, automatically
adding pcie-root-ports is fairly straightforward. The
dmi-to-pci-bridge support is a bit tricky though, for a few reasons:

1) Although the only reason to add a dmi-to-pci-bridge is so that
   there is a reasonable place to plug in a pci-bridge controller,
   most of the time it's not the presence of a pci-bridge *in the
   config* that triggers the requirement to add a dmi-to-pci-bridge.
   Rather, it is the presence of a legacy-PCI device in the config,
   which triggers auto-add of a pci-bridge, which triggers auto-add of
   a dmi-to-pci-bridge (this is handled in
   virDomainPCIAddressSetGrow() - if there's a request to add a
   pci-bridge we'll check if there is a suitable bus to plug it into;
   if not, we first add a dmi-to-pci-bridge).

2) Once there is already a single dmi-to-pci-bridge on the system,
   there won't be a need for any more, even if it's full, as long as
   there is a pci-bridge with an open slot - you can also plug
   pci-bridges into existing pci-bridges. So we have to make sure we
   don't add a dmi-to-pci-bridge unless there aren't any
   dmi-to-pci-bridges *or* any pci-bridges.

3) Although it is strongly discouraged, it is legal for a pci-bridge
   to be directly plugged into pcie-root, and we don't want to
   auto-add a dmi-to-pci-bridge if there is already a pci-bridge
   that's been forced directly into pcie-root.

Although libvirt will now automatically create a dmi-to-pci-bridge
when it's needed, the code still remains for now that forces a
dmi-to-pci-bridge on all domains with pcie-root (in
qemuDomainDefAddDefaultDevices()). That will be removed in a future
patch.

For now, the pcie-root-ports are added one to a slot, which is a bit
wasteful and means it will fail after 31 total PCIe devices (30 if
there are also some PCI devices), but helps keep the changeset down
for this patch. A future patch will have 8 pcie-root-ports sharing the
functions on a single slot.
2016-11-14 14:19:36 -05:00
Laine Stump
5266426b21 qemu: assign nec-xhci (USB3) controller to a PCIe address when appropriate
The nec-usb-xhci device (which is a USB3 controller) has always
presented itself as a PCI device when plugged into a legacy PCI slot,
and a PCIe device when plugged into a PCIe slot, but libvirt has
always auto-assigned it to a legacy PCI slot.

This patch changes that behavior to auto-assign to a PCIe slot on
systems that have pcie-root (e.g. Q35 and aarch64/virt).

Since we don't yet auto-create pcie-*-port controllers on demand, this
means a config with an nec-xhci USB controller that has no PCI address
assigned will also need to have an otherwise-unused pcie-*-port
controller specified:

   <controller type='pci' model='pcie-root-port'/>
   <controller type='usb' model='nec-xhci'/>

(this assumes there is an otherwise-unused slot on pcie-root to accept
the pcie-root-port)
2016-11-14 14:18:06 -05:00
Laine Stump
9dfe733e99 qemu: assign e1000e network devices to PCIe slots when appropriate
The e1000e is an emulated network device based on the Intel 82574,
present in qemu 2.7.0 and later. Among other differences from the
e1000, it presents itself as a PCIe device rather than legacy PCI. In
order to get it assigned to a PCIe controller, this patch updates the
flags setting for network devices when the model name is "e1000e".

(Note that for some reason libvirt has never validated the network
device model names other than to check that there are no dangerous
characters in them. That should probably change, but is the subject of
another patch.)

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1343094
2016-11-14 14:17:14 -05:00
Laine Stump
c7fc151eec qemu: assign virtio devices to PCIe slot when appropriate
libvirt previously assigned nearly all devices to a "hotpluggable"
legacy PCI slot even on machines with a PCIe root bus (and even though
most such machines don't even support hotplug on legacy PCI slots!)
Forcing all devices onto legacy PCI slots means that the domain will
need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a
pci-bridge (to provide hotpluggable legacy PCI slots which, again,
usually aren't hotpluggable anyway).

To help reduce the need for these legacy controllers, this patch tries
to assign virtio-1.0-capable devices to PCIe slots whenever possible,
by setting appropriate connectFlags in
virDomainCalculateDevicePCIConnectFlags(). Happily, when that function
was written (just a few commits ago) it was created with a
"virtioFlags" argument, set by both of its callers, which is the
proper connectFlags to set for any virtio-*-pci device - depending on
the arch/machinetype of the domain, and whether or not the qemu binary
supports virtio-1.0, that flag will have either been set to PCI or
PCIe. This patch merely enables the functionality by setting the flags
for the device to whatever is in virtioFlags if the device is a
virtio-*-pci device.

NB: the first virtio video device will be placed directly on bus 0
slot 1 rather than on a pcie-root-port due to the override for primary
video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not
to change that is a topic of discussion, but this patch doesn't change
that particular behavior.

NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root
complex) does *not* support hotplug, this means that suitable
controllers must also be in the config (i.e. either pcie-root-port, or
pcie-downstream-port). For now, libvirt doesn't add those
automatically, so if you put virtio devices in a config for a qemu
that has PCIe-capable virtio devices, you'll need to add extra
pcie-root-ports yourself. That requirement will be eliminated in a
future patch, but for now, it's simple to do this:

   <controller type='pci' model='pcie-root-port'/>
   <controller type='pci' model='pcie-root-port'/>
   <controller type='pci' model='pcie-root-port'/>
   ...

Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-11-14 14:16:12 -05:00
Peter Krempa
b7798a07f9 qemu: Generate memory device aliases according to slot number
The memory device alias needs to be treated as machine ABI as qemu is
using it in the migration stream for section labels. To simplify this
generate the alias from the slot number unless an existing broken
configuration is detected.

With this patch the aliases are predictable and even certain
configurations which would not be migratable previously are fixed.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1359135
2016-11-10 17:36:55 +01:00
Peter Krempa
ce1ee02a25 qemu: Assign slots to memory devices prior to usage
As with other devices assign the slot number right away when adding the
device. This will make the slot numbers static as we do with other
addressing elements and it will ultimately simplify allocation of the
alias in a static way which does not break with qemu.
2016-11-10 17:36:55 +01:00
Peter Krempa
810e9a8061 conf: Allow specifying only the slot number for hotpluggable memory
Simplify handling of the 'dimm' address element by allowing to specify
the slot number only. This will allow libvirt to allocate slot numbers
before starting qemu.
2016-11-10 17:36:55 +01:00
Martin Kletzander
5672a265ce qemu: Make sure shmem memory is shared
Even though using /dev/shm/asdf as the backend, we still need to make
the mapping shared.  The original patch forgot to add that parameter.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1392031

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-11-10 08:31:19 +01:00
Prasanna Kumar Kalever
e66603539b qemu: command: Add debug option for gluster volumes
Propagate the selected or default level to qemu if it's supported.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1376009

Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2016-11-09 16:52:40 +01:00
Martin Kletzander
06524fd52c qemu: Support newer ivshmem device variants
QEMU added support for ivshmem-plain and ivshmem-doorbell.  Those are
reworked varians of legacy ivshmem that are compatible from the guest
POV, but not from host's POV and have sane specification and handling.

Details about the newer device type can be found in qemu's commit
5400c02b90bb:

  http://git.qemu.org/?p=qemu.git;a=commit;h=5400c02b90bb

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-11-02 17:36:17 +01:00
Martin Kletzander
acf0ec024a qemu: Save various defaults for shmem
We're keeping some things at default and that's not something we want to
do intentionally.  Let's save some sensible defaults upfront in order to
avoid having problems later.  The details for the defaults (of the newer
implementation) can be found in qemu's commit 5400c02b90bb:

  http://git.qemu.org/?p=qemu.git;a=commit;h=5400c02b90bb

Since we are merely saving the defaults it will not change the guest ABI
and thanks to the fact that we're doing it in the PostParse callback it
will not break the ABI stability checks.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-11-02 16:05:39 +01:00
Martin Kletzander
3c06aa7b30 conf, qemu: Add newer shmem models
The old ivshmem is deprecated in QEMU, so let's use the better
ivshmem-{plain,doorbell} variants instead.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-11-02 16:05:39 +01:00
Martin Kletzander
64530a9c66 conf, qemu: Add support for shmem model
Just the default one now, new ones will be added in following commits.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-11-02 16:05:39 +01:00
Gema Gomez
0701abcb3b qemu: Add support for using AES secret for SCSI hotplug
Support for virtio disks was added in commit id 'fceeeda', but not for
SCSI drives. Add the secret for the server when hotplugging a SCSI drive.
No need to make any adjustments for unplug since that's handled during
the qemuDomainDetachDiskDevice call to qemuDomainRemoveDiskDevice in
the qemuDomainDetachDeviceDiskLive switch.

Added a test to/for the command line processing to show the command line
options when adding a SCSI drive for the guest.
2016-10-26 08:07:15 -04:00
John Ferlan
daf5c651f0 qemu: Add a secret object to/for a char source dev
Add the secret object so the 'passwordid=' can be added if the command line
if there's a secret defined in/on the host for TCP chardev TLS objects.

Preparation for the secret involves adding the secinfo to the char source
device prior to command line processing. There are multiple possibilities
for TCP chardev source backend usage.

Add test for at least a serial chardev as an example.
2016-10-26 07:18:25 -04:00
John Ferlan
2db108c766 qemu: Add the length options to the iotune command line
Add in the block I/O throttling length/duration parameter to the command
line if supported. If not supported, fail command creation.

Add the xml2argvtest for testing.
2016-10-25 17:20:17 -04:00
John Ferlan
8dcf355973 conf: Add support for blkiotune "_length" options
Modify _virDomainBlockIoTuneInfo and rng schema to support the _length
options for bps/iops throttling values. Document the new values.
2016-10-25 17:20:17 -04:00
Pavel Hrdina
0298531b29 domain: Add optional 'tls' attribute for TCP chardev
Add an optional "tls='yes|no'" attribute for a TCP chardev.

For QEMU, this will allow for disabling the host config setting of the
'chardev_tls' for a domain chardev channel by setting the value to "no" or
to attempt to use a host TLS environment when setting the value to "yes"
when the host config 'chardev_tls' setting is disabled, but a TLS environment
is configured via either the host config 'chardev_tls_x509_cert_dir' or
'default_tls_x509_cert_dir'

Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-10-24 16:05:33 +02:00
Pavel Hrdina
df93b5f5f5 qemu: always generate the same alias for tls-creds-x509 object
There was inconsistency between alias used to create tls-creds-x509
object and alias used to link that object to chardev while hotpluging.
Hotplug ends with this error:

  error: Failed to detach device from channel-tcp.xml
  error: internal error: unable to execute QEMU command 'chardev-add':
  No TLS credentials with id 'objcharchannel3_tls0'

In XML we have for example alias "serial0", but on qemu command line we
generate "charserial0".

The issue was that code, that creates QMP command to hotplug chardev
devices uses only the second alias "charserial0" and that alias is also
used to link the tls-creds-x509 object.

This patch unifies the aliases for tls-creds-x509 to be always generated
from "charserial0".

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-10-18 17:01:26 +02:00
John Ferlan
40b6f91900 qemu: Add 'verify-peer=yes' test for chardev TCP TLS
Missing the option to set verify-peer to yes

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-10-17 15:38:32 -04:00
Andrea Bolognani
61e101437b conf: Explain some code in more detail
The code is entirely correct, but it still managed to trip me
up when I first ran into it because I did not realize right away
that VIR_PCI_CONNECT_TYPES_ENDPOINT was not a single flag, but
rather a mask including both VIR_PCI_CONNECT_TYPE_PCI_DEVICE and
VIR_PCI_CONNECT_TYPE_PCIE_DEVICE.

In order to save the next distracted traveler in PCI Address Land
some time, document this fact with a comment. Add a test case for
the behavior as well.
2016-10-17 10:04:54 +02:00
Michal Privoznik
e1844d85cb qemuBuildHostNetStr: Support VIR_DOMAIN_NET_TYPE_VHOSTUSER
https://bugzilla.redhat.com/show_bug.cgi?id=1366505

So far, this function lacked support for
VIR_DOMAIN_NET_TYPE_VHOSTUSER leaving callers to hack around the
problem by constructing the command line on their own. This is
not ideal as it blocks hot plug support.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-10-14 11:45:01 +08:00
Michal Privoznik
b093e85224 qemuBuildVhostuserCommandLine: Unify -netdev creation
Currently, what we do for vhost-user network is generate the
following part of command line:

-netdev type=vhost-user,id=hostnet0,chardev=charnet0

There's no need for 'type=' it is the default. Drop it.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-10-14 11:45:01 +08:00
Michal Privoznik
4a74ccdb92 qemuBuildInterfaceCommandLine: Move vhostuser handling a bit further
The idea is to have function that does some checking of the
arguments at its beginning and then have one big switch for all
the interface types it supports. Each one of them generating the
corresponding part of the command line.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-10-14 10:15:51 +08:00
Michal Privoznik
ec7f612a56 qemuBuildInterfaceCommandLine: Move hostdev handling a bit further
The idea is to have function that does some checking of the
arguments at its beginning and then have one big switch for all
the interface types it supports. Each one of them generating the
corresponding part of the command line.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-10-14 10:15:51 +08:00
Pavel Hrdina
fb8f3b1c22 qemu_command: add support to use virtio as secondary video device
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1369633

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-10-12 17:46:48 +02:00
Pavel Hrdina
4c029e8cfa qemu_command: properly detect which model to use for video device
This improves commit 706b5b6277 in a way that we check qemu capabilities
instead of what architecture we are running on to detect whether we can
use *virtio-vga* model or not.  This is not a case only for arm/aarch64.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-10-12 17:46:48 +02:00
Pavel Hrdina
34a4447bd4 qemu_capabilities: join capabilities for qxl and qxl-vga devices
This patch simplifies QEMU capabilities for QXL video device.  QEMU
exposes this device as *qxl-vga* and *qxl* and they are both the same
device with the same set of parameters, the only difference is that
*qxl-vga* includes VGA compatibility.

Based on QEMU code they are tied together so it's safe to check only for
presence of only one of them.

This patch also removes an invalid test case "video-qxl-sec-nodevice"
where there is only *qxl-vga* device and *qxl* device is not present.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-10-12 17:46:47 +02:00
Pavel Hrdina
e3bbdd9b06 tests: fix some QXL capability combinations that don't make sense
If one of QEMU_CAPS_DEVICE_QXL_VGA or QEMU_CAPS_DEVICE_QXL is set the
other one will always be set as well because both devices are tied
together in QEMU.

The change of args files is caused by the presence of capability
QEMU_CAPS_DEVICE_VIDEO_PRIMARY which means it's safe to use
"-device qxl-vga" instead of "-vga qxl", see commit (e3f2686b) and
by the fact that if QEMU_CAPS_VGA_QXL is set QEMU_CAPS_DEVICE_QXL_VGA
and QEMU_CAPS_DEVICE_QXL would be set too (since we support only qemu
with "-device" option).

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-10-12 17:46:47 +02:00
Daniel P. Berrange
5dee668632 qemu: fix command line building for iommu devices
The intel-iommu device has existed since QEMU 2.2.0, but
it was only possible to create it with -device since
QEMU 2.7.0, thanks to:

  commit 621d983a1f9051f4cfc3f402569b46b77d8449fc
  Author: Marcel Apfelbaum <marcel@redhat.com>
  Date:   Mon Jun 27 18:38:34 2016 +0300

    hw/iommu: enable iommu with -device

    Use the standard '-device intel-iommu' to create the IOMMU device.
    The legacy '-machine,iommu=on' can still be used.

The libvirt capability check & command line formatting code
is thus broken for all QEMU versions 2.2.0 -> 2.6.0 inclusive.

This fixes it to use iommu=on instead.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-10-07 16:52:35 +01:00
John Ferlan
a1417d5305 qemu: Convert from shorthand to longer throttling names
We're about to add 6 new options and it appears (from testing) one cannot
utilize both the shorthand (alias) and (much) longer names for the arguments.
So modify the command builder to use the longer name and of course alter the
test output .args to have the similarly innocuous long name.

Also utilize a macro to build that name makes it so much more visually
appealing and saves a few characters or potential cut-n-paste issues.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-10-05 18:53:55 -04:00
John Ferlan
c3584265ba tests: Add blkdeviotune-max xml2xmltest
It was missing... Also since I'm using the soft link from qemuxml2xmloutdata
to the qemuxml2argvdata file, modify the output file to have the necessary
<address> elements plus the mouse and keyboard.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-10-05 18:53:55 -04:00
Martin Kletzander
ff3112f3dc qemu: Only use memory-backend-file with NUMA if needed
If this reminds you of a commit message from around a year ago, it's
41c2aa729f and yes, we're dealing with
"the same thing" again.  Or f309db1f4d and
it's similar.

There is a logic in place that if there is no real need for
memory-backend-file, qemuBuildMemoryBackendStr() returns 0.  However
that wasn't the case with hugepage backing.  The reason for that was
that we abused the 'pagesize' variable for storing that information, but
we should rather have a separate one that specifies whether we really
need the new object for hugepage backing.  And that variable should be
set only if this particular NUMA cell needs special treatment WRT
hugepages.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1372153

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-09-29 15:43:13 +02:00
Jiri Denemark
7ce711a30e qemu: Update guest CPU def in live XML
Storing the updated CPU definition in the live domain definition saves
us from having to update it over and over when we need it. Not to
mention that we will soon further update the CPU definition according to
QEMU once it's started.

A highly wanted side effect of this patch, libvirt will pass all CPU
features explicitly specified in domain XML to QEMU, even those that are
already included in the host model.

This patch should fix the following bugs:
    https://bugzilla.redhat.com/show_bug.cgi?id=1207095
    https://bugzilla.redhat.com/show_bug.cgi?id=1339680
    https://bugzilla.redhat.com/show_bug.cgi?id=1371039
    https://bugzilla.redhat.com/show_bug.cgi?id=1373849
    https://bugzilla.redhat.com/show_bug.cgi?id=1375524
    https://bugzilla.redhat.com/show_bug.cgi?id=1377913

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2016-09-22 15:40:09 +02:00
Jiri Denemark
0b7cf7f744 qemuxml2argvtest: Reorder CPU features
The x86 CPU driver translated each CPU definition from domain XML into
CPUID data and then back to CPU definition. This effectively sorted the
list of CPU features according to their CPUID values. Since this is
going to change, we need to reorder CPU features in a few test files to
make sure the generated QEMU command lines will not change.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2016-09-22 15:40:08 +02:00
Jiri Denemark
b89fa6d1b6 qemuxml2argvtest: Properly setup CPU models in qemuCaps
Adding x86 CPU models into a list of supported CPUs for non-x86
architectures is not a very good idea. Each architecture we test needs
to maintain its own list of supported CPU models.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2016-09-22 15:40:08 +02:00
Martin Kletzander
6b5622e4b5 qemu: Reorder shmem params nicely
Always format id first so that we don't need to do that twice in
different code paths.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-09-20 15:42:43 +02:00
Laszlo Ersek
706b5b6277 qemu: map "virtio" video model to "virt" machtype correctly (arm/aarch64)
Most of QEMU's PCI display device models, such as:

  libvirt video/model/@type  QEMU -device
  -------------------------  ------------
  cirrus                     cirrus-vga
  vga                        VGA
  qxl                        qxl-vga
  virtio                     virtio-vga

come with a linear framebuffer (sometimes called "VGA compatibility
framebuffer"). This linear framebuffer lives in one of the PCI device's
MMIO BARs, and allows guest code (primarily: firmware drivers, and
non-accelerated OS drivers) to display graphics with direct memory access.

Due to architectural reasons on aarch64/KVM hosts, this kind of
framebuffer doesn't / can't work in

  qemu-system-(arm|aarch64) -M virt

machines. Cache coherency issues guarantee a corrupted / unusable display.
The problem has been researched by several people, including kvm-arm
maintainers, and it's been decided that the best way (practically the only
way) to have boot time graphics for such guests is to consolidate on
QEMU's "virtio-gpu-pci" device.

>From <https://bugzilla.redhat.com/show_bug.cgi?id=1195176>, libvirt
supports

  <devices>
    <video>
      <model type='virtio'/>
    </video>
  </devices>

but libvirt unconditionally maps @type='virtio' to QEMU's "virtio-vga"
device model. (See the qemuBuildDeviceVideoStr() function and the
"qemuDeviceVideo" enum impl.)

According to the above, this is not right for the "virt" machine type; the
qemu-system-(arm|aarch64) binaries don't even recognize the "virtio-vga"
device model (justifiedly). Whereas "virtio-gpu-pci", which is a pure
virtio device without a compatibility framebuffer, is available, and works
fine.

(The ArmVirtQemu ("AAVMF") platform of edk2 -- that is, the UEFI firmware
for "virt" -- supports "virtio-gpu-pci", as of upstream commit
3ef3209d3028. See
<https://tianocore.acgmultimedia.com/show_bug.cgi?id=66>.)

Override the default mapping of "virtio", from "virtio-vga" to
"virtio-gpu-pci", if qemuDomainMachineIsVirt() evaluates to true.

Cc: Andrea Bolognani <abologna@redhat.com>
Cc: Drew Jones <drjones@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Martin Kletzander <mkletzan@redhat.com>
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1372901
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Martin Kletzander <mkletzan@redhat.com>
2016-09-16 14:13:07 +02:00
Daniel P. Berrange
e043ecc82d tests: use a fixed chardev TLS path
The test qemuxml2argv-serial-tcp-tlsx509-chardev.args
will fail if libvirt is built with a --sysconfdir
arg that is not /etc.  Fix this by setting a hardcoded
path in the test code.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-09-14 10:46:09 +01:00
Michal Privoznik
2692304c94 qemu: Implement virtio-net rx_queue_size
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-09-09 16:16:59 +02:00
Michal Privoznik
c56cdf2593 conf: Add support for virtio-net.rx_queue_size
https://bugzilla.redhat.com/show_bug.cgi?id=1366989

QEMU added another virtio-net tunable [1]. It basically allows
users to set the size of RX virtio ring. But because virtio-net
uses two separate ring buffers to pass data from/to guest they
named it explicitly rx_queue_size. We should expose it in our XML
too.

1: http://lists.nongnu.org/archive/html/qemu-devel/2016-08/msg02029.html

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-09-09 16:16:59 +02:00
John Ferlan
ce61c16450 qemu: Add support for TLS X.509 path to TCP chardev backend
When building a chardev device string for tcp, add the necessary pieces to
access provide the TLS X.509 path to qemu.  This includes generating the
'tls-creds-x509' object and then adding the 'tls-creds' parameter to the
VIR_DOMAIN_CHR_TYPE_TCP command line.

Finally add the tests for the qemu command line. This test will make use
of the "new(ish)" /etc/pki/qemu setting for a TLS certificate environment
by *not* "resetting" the chardevTLSx509certdir prior to running the test.
Also use the default "verify" option (which is "no").

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-09-09 08:09:47 -04:00
John Ferlan
3f60a9c32f conf: Introduce chartcp_tls_x509_cert_dir
Add a new TLS X.509 certificate type - "chardev". This will handle the
creation of a TLS certificate capability (and possibly repository) for
properly configured character device TCP backends.

Unlike the vnc and spice there is no "listen" or "passwd" associated. The
credentials eventually will be handled via a libvirt secret provided to
a specific backend.

Make use of the default verify option as well.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-09-09 08:09:03 -04:00
Daniel P. Berrange
a116e58f99 tests: add missing data files for core config
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-09-06 13:38:08 +01:00
Peter Krempa
9eb9106ea5 qemu: command: Add support for sparse vcpu topologies
Add support for using the new approach to hotplug vcpus using device_add
during startup of qemu to allow sparse vcpu topologies.

There are a few limitations imposed by qemu on the supported
configuration:
- vcpu0 needs to be always present and not hotpluggable
- non-hotpluggable cpus need to be ordered at the beginning
- order of the vcpus needs to be unique for every single hotpluggable
  entity

Qemu also doesn't really allow to query the information necessary to
start a VM with the vcpus directly on the commandline. Fortunately they
can be hotplugged during startup.

The new hotplug code uses the following approach:
- non-hotpluggable vcpus are counted and put to the -smp option
- qemu is started
- qemu is queried for the necessary information
- the configuration is checked
- the hotpluggable vcpus are hotplugged
- vcpus are started

This patch adds a lot of checking code and enables the support to
specify the individual vcpu element with qemu.
2016-08-24 15:44:47 -04:00
John Ferlan
d53d465083 qemu: Fix the command line generation for rbd auth using aes secrets
https://bugzilla.redhat.com/show_bug.cgi?id=1182074

Since libvirt still uses a legacy qemu arg format to add a disk, the
manner in which the 'password-secret' argument is passed to qemu needs
to change to prepend a 'file.' If in the future, usage of the more
modern disk format, then the prepended 'file.' can be removed.

Fix based on Jim Fehlig <jfehlig@suse.com> posting and subsequent
upstream list followups, see:

http://www.redhat.com/archives/libvir-list/2016-August/msg00777.html

for details. Introduced by commit id 'a1344f70'.
2016-08-17 08:03:48 -04:00
Ján Tomko
ef66bd5df8 conf: report an error message for non-existing USB hubs
If any of the devices referenced a USB hub that does not exist,
defining the domain would either fail with:
error: An error occurred, but the cause is unknown
(if only the last hub in the path is missing)
or crash.

Return a proper error instead of crashing.

https://bugzilla.redhat.com/show_bug.cgi?id=1367130
2016-08-16 12:31:41 +02:00
Laine Stump
a220f43a65 conf: restrict expander buses to connect only to a root bus
More misunderstanding/mistaken assumptions on my part - I had thought
that a pci-expander-bus could be plugged into any legacy PCI slot, and
that pcie-expander-bus could be plugged into any PCIe slot. This isn't
correct - they can both be plugged ontly into their respective root
buses. This patch adds that restriction.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1358712
2016-08-10 10:29:34 -04:00
Laine Stump
b70e3d0123 conf: restrict where dmi-to-pci-bridge can be connected
libvirt had allowed a dmi-to-pci-bridge to be plugged in anywhere a
normal PCIe endpoint can be connected, but this is wrong - it will
only work if it's plugged into pcie-root (the PCIe root complex) or a
pcie-expander-bus (the qemu device pxb-pcie). This patch adjusts the
connection flags accordingly.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1363648
2016-08-10 10:27:37 -04:00
Jiri Denemark
300f668c66 cpu_x86: Fix host-model CPUs on hosts with CMT
Since the introduction of CMT features (commit v1.3.5-461-gf294b83)
starting a domain with host-model CPU on a host which supports CMT fails
because QEMU complains about unknown 'cmt' feature:

    qemu-system-x86_64: CPU feature cmt not found

https://bugzilla.redhat.com/show_bug.cgi?id=1355857

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2016-08-10 14:25:24 +02:00
Jiri Denemark
58ba240df8 tests: Add a test for host-model CPU with CMT feature
The generated command line wouldn't work since QEMU doesn't know what
'cmt' is. The following patch will fix this issue.

https://bugzilla.redhat.com/show_bug.cgi?id=1355857

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2016-08-10 14:25:24 +02:00
Michal Privoznik
9c1524a01c qemu: Enable secure boot
In qemu, enabling this feature boils down to adding the following
onto the command line:

  -global driver=cfi.pflash01,property=secure,value=on

However, there are some constraints resulting from the
implementation. For instance, System Management Mode (SMM) is
required to be enabled, the machine type must be q35-2.4 or
later, and the guest should be x86_64. While technically it is
possible to have 32 bit guests with secure boot, some non-trivial
CPU flags tuning is required (for instance lm and nx flags must
be prohibited). Given complexity of our CPU driver, this is not
trivial. Therefore I've chosen to forbid 32 bit guests for now.
If there's ever need, we can refine the check later.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-08-04 17:22:20 +02:00
Michal Privoznik
64c2480043 Introduce @secure attribute to os loader element
This element will control secure boot implemented by some
firmwares. If the firmware used in <loader/> does support the
feature we must tell it to the underlying hypervisor. However, we
can't know whether loader does support it or not just by looking
at the file. Therefore we have to have an attribute to the
element where users can tell us whether the firmware is secure
boot enabled or not.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-08-04 17:14:20 +02:00
Michal Privoznik
d0e4be9d02 Introduce SMM feature
Since its release of 2.4.0 qemu is able to enable System
Management Module in the firmware, or disable it. We should
expose this capability in the XML. Unfortunately, there's no good
way to determine whether the binary we are talking to supports
it. I mean, if qemu's run with real machine type, the smm
attribute can be seen in 'qom-list /machine' output. But it's not
there when qemu's run with -M none. Therefore we're stuck with
version based check.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-08-04 17:14:20 +02:00
John Ferlan
2197ea56d7 conf: Add IOThread quota and period scheduler/cputune defs
https://bugzilla.redhat.com/show_bug.cgi?id=1356937

Add the definitions to allow for viewing/setting cgroup period and quota
limits for IOThreads.

This is similar to the work done for emulator quota and period by
commit ids 'b65dafa' and 'e051c482'.

Being able to view/set the IOThread specific values is related to more
recent changes adding global period (commmit id '4d92d58f') and global
quota (commit id '55ecdae') definitions and qemu support (commit id
'4e17ff79' and 'fbcbd1b2'). With a global setting though, if somehow
the IOThread value in the cgroup hierarchy was set "outside of libvirt"
to a value that is incompatible with the global value.

Allowing control over IOThread specific values provides the capability
to alter the IOThread values as necessary.
2016-08-03 06:36:22 -04:00
Daniel P. Berrange
a48c714115 storage: remove "luks" storage volume type
The current LUKS support has a "luks" volume type which has
a "luks" encryption format.

This partially makes sense if you consider the QEMU shorthand
syntax only requires you to specify a format=luks, and it'll
automagically uses "raw" as the next level driver. QEMU will
however let you override the "raw" with any other driver it
supports (vmdk, qcow, rbd, iscsi, etc, etc)

IOW the intention though is that the "luks" encryption format
is applied to all disk formats (whether raw, qcow2, rbd, gluster
or whatever). As such it doesn't make much sense for libvirt
to say the volume type is "luks" - we should be saying that it
is a "raw" file, but with "luks" encryption applied.

IOW, when creating a storage volume we should use this XML

  <volume>
    <name>demo.raw</name>
    <capacity>5368709120</capacity>
    <target>
      <format type='raw'/>
      <encryption format='luks'>
        <secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
      </encryption>
    </target>
  </volume>

and when configuring a guest disk we should use

  <disk type='file' device='disk'>
    <driver name='qemu' type='raw'/>
    <source file='/home/berrange/VirtualMachines/demo.raw'/>
    <target dev='sda' bus='scsi'/>
    <encryption format='luks'>
      <secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
    </encryption>
  </disk>

This commit thus removes the "luks" storage volume type added
in

  commit 318ebb36f1
  Author: John Ferlan <jferlan@redhat.com>
  Date:   Tue Jun 21 12:59:54 2016 -0400

    util: Add 'luks' to the FileTypeInfo

The storage file probing code is modified so that it can probe
the actual encryption formats explicitly, rather than merely
probing existance of encryption and letting the storage driver
guess the format.

The rest of the code is then adapted to deal with
VIR_STORAGE_FILE_RAW w/ VIR_STORAGE_ENCRYPTION_FORMAT_LUKS
instead of just VIR_STORAGE_FILE_LUKS.

The commit mentioned above was included in libvirt v2.0.0.
So when querying volume XML this will be a change in behaviour
vs the 2.0.0 release - it'll report 'raw' instead of 'luks'
for the volume format, but still report 'luks' for encryption
format.  I think this change is OK because the storage driver
did not include any support for creating volumes, nor starting
guets with luks volumes in v2.0.0 - that only since then.
Clearly if we change this we must do it before v2.1.0 though.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-07-27 18:59:15 +01:00
Prasanna Kumar Kalever
7b7da9e283 qemu: command: Add support for multi-host gluster disks
To allow using failover with gluster it's necessary to specify multiple
volume hosts. Add support for starting qemu with such configurations.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2016-07-27 13:38:53 +02:00
Ján Tomko
815d98ac0b Auto-add one hub if there are too many USB devices
When parsing a command line with USB devices that have
no address specified, QEMU automatically adds a USB hub
if the device would fill up all the available USB ports.

To help most of the users, add one hub if there are more
USB devices than available ports. For wilder configurations,
expect the user to provide us with more hubs and/or controllers.
2016-07-21 08:30:26 +02:00
Ján Tomko
bf182078d9 Assign addresses to USB devices
Automatically assign addresses to USB devices.

Just like reserving, this is only done for newly defined domains.

https://bugzilla.redhat.com/show_bug.cgi?id=1215968
2016-07-21 08:30:26 +02:00
Ján Tomko
69f5ce45ab Add tests for USB address assignment
Introduce tests with the ich9, xhci and the default (piix3) usb
controller to demonstrate the effect of the next patch.
2016-07-21 08:30:26 +02:00
Ján Tomko
ddd31fd7dc Reserve existing USB addresses
Check if they fit on the USB controllers the domain has,
and error out if two devices try to use the same address.
2016-07-21 08:30:26 +02:00
John Ferlan
da86c6c226 qemu: Add luks support for domain disk
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1301021

Generate the luks command line using the AES secret key to encrypt the
luks secret. A luks secret object will be in addition to a an AES secret.

For hotplug, check if the encinfo exists and if so, add the AES secret
for the passphrase for the secret object used to decrypt the device.

Modify/augment the fakeSecret* in qemuxml2argvtest in order to handle
find a uuid or a volume usage with a specific path prefix in the XML
(corresponds to the already generated XML tests). Add error message
when the 'usageID' is not 'mycluster_myname'. Commit id '1d632c39'
altered the error message generation to rely on the errors from the
secret_driver (or it's faked replacement).

Add the .args output for adding the LUKS disk to the domain

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-07-19 09:40:10 -04:00
Ján Tomko
4f90364318 Allow omitting USB port
We were requiring a USB port path in the schema, but not enforcing it.
Omitting the USB port would lead to libvirt formatting it as (null).
Such domain cannot be started and will disappear after libvirtd restart
(since it cannot parse back the XML).

Only format the port if it has been specified and mark it as optional
in the XML schema.
2016-07-18 10:55:35 +02:00
John Ferlan
a8d0afc75a tests: Adjust LUKS tests to use 'volume' secret type
Commit id's '9bbf0d7e6' and '2552fec24' added some XML parsing tests
for a LUKS volume to use a 'passphrase' secret format. After commit,
this was deemed to be incorrect, so covert the various tests to use
the volume usage format where the 'usage' is the path to the volume
rather than a user defined name string.

Also, removed the qemuxml2argv-luks-disk-cipher.xml since it was
just a duplicate of qemuxml2argv-luks-disks.xml.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-07-14 13:01:58 -04:00
Ján Tomko
4c382376da qemu: format intel-iommu on the command line
<devices>
  <iommu model='intel'/>
</devices>

results in:

-device intel-iommu

https://bugzilla.redhat.com/show_bug.cgi?id=1235580
2016-07-12 12:36:13 +02:00
Ján Tomko
ea0ed35d6e Introduce <iommu> device
A device with an attribute 'model', with just one model
so far:

<devices>
  ...
  <iommu model='intel'/>
</devices>

https://bugzilla.redhat.com/show_bug.cgi?id=1235580
2016-07-12 12:36:13 +02:00
Ján Tomko
4808ebdef6 test-wrap-argv: set cutoff at 78 characters
For every but the last argument, we also need space for a space
and a backslash.

Rewrap everything longer than 78 characters.
2016-07-12 12:35:41 +02:00
Ján Tomko
45ff2362e4 qemuxml2argvtest: drop empty pseries-vio-address-clash.args
Unused since its introduction in commit 4b942fe.
2016-07-12 12:15:50 +02:00
Tomasz Flendrich
ec5dcf2a5d qemuhotplugtest: Move all XMLs to one directory
This makes the search for related XMLs easier, plus they are not used in
the xml2argv tests anyway.  This also makes future patches cleaner.
While on that remove unnecessary '-hotplug' from the filenames.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-07-11 17:09:29 +02:00
Peter Krempa
e114b09157 qemu: caps: Always assume QEMU_CAPS_SMP_TOPOLOGY
Support for SMP topology was added by qemu commit dc6b1c09849484fbbc50
prior to 0.12.0, our minimum supported qemu version.

$ git describe --tags dc6b1c09849484fbbc50803307e4c7a3d81eab62
v0.11.0-rc0-449-gdc6b1c0
$ git describe --tags --contains dc6b1c09849484fbbc50803307e4c7a3d81eab
v0.12.0-rc0~1477
2016-07-07 15:08:35 +02:00
Paolo Bonzini
7a97676b96 qemu: generate -display none
This is preferrable to -nographic which (in addition to disabling
graphics output) redirects the serial port to stdio and on OpenBIOS
enables the firmware's serial console.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-07 11:51:39 +02:00
Laine Stump
fe8567f6ad qemu: support setting host-side IP addresses/routes
For type='ethernet' interfaces only.

(This patch had been pushed earlier in
commit 0b4645a7e0, but was reverted in
commit 84d47a3cce because it had been
accidentally pushed during the freeze for release 2.0.0)
2016-07-01 21:13:31 -04:00
John Ferlan
2552fec248 encryption: Add <cipher> and <ivgen> to encryption
For a luks device, allow the configuration of a specific cipher to be
used for encrypting the volume.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-07-01 15:46:57 -04:00
John Ferlan
9bbf0d7e64 encryption: Add luks parsing for storageencryption
Add parse and format of the luks/passphrase secret including tests for
volume XML parsing.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-07-01 15:46:52 -04:00
John Ferlan
47e88b33be util: Add 'usage' for encryption
In order to use more common code and set up for a future type, modify the
encryption secret to allow the "usage" attribute or the "uuid" attribute
to define the secret. The "usage" in the case of a volume secret would be
the path to the volume as dictated by the backwards compatibility brought
on by virStorageGenerateQcowEncryption where it set up the usage field as
the vol->target.path and didn't allow someone to provide it. This carries
into virSecretObjListFindByUsageLocked which takes the secret usage attribute
value from from the domain disk definition and compares it against the
usage type from the secret definition. Since none of the code dealing
with qcow/qcow2 encryption secrets uses usage for lookup, it's a mostly
cosmetic change. The real usage comes in a future path where the encryption
is expanded to be a luks volume and the secret will allow definition of
the usage field.

This code will make use of the virSecretLookup{Parse|Format}Secret common code.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-07-01 15:46:24 -04:00
Ján Tomko
3681e0a9fe Add USB addresses to qemuhotplug test cases
This test assumes the XML will be the same after formatting.
Add USB addresses to it to keep it working when we autoassign them.
2016-07-01 12:25:18 +02:00
Jiri Denemark
0dd67acfa7 qemu: Use bootindex whenever possible
I'm not sure why our code claimed "-boot menu=on" cannot be used in
combination with per-device bootindex, but it was proved wrong about
four years ago by commit 8c952908. Let's always use bootindex when QEMU
supports it.

https://bugzilla.redhat.com/show_bug.cgi?id=1323085

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2016-07-01 12:20:54 +02:00
Marc Hartmayer
cdf4ae6ae3 tests: Add test cases for SCSI disk hot-plug with QEMU
Verify that SCSI controllers get created automatically when a SCSI disk
is hot-plugged to a domain that doesn't have a matching SCSI controller
defined already.

Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
2016-06-30 12:48:51 +02:00
Ján Tomko
84d47a3cce Revert "qemu: support setting host-side IP addresses/routes"
This reverts commit 0b4645a7e0.

This feature was accidentally pushed in the feature freeze.
2016-06-27 12:54:55 +02:00
Laine Stump
0b4645a7e0 qemu: support setting host-side IP addresses/routes
For type='ethernet' interfaces only.
2016-06-26 19:33:10 -04:00
Ján Tomko
b3ee621e94 Add a USB hub to controller order test
The test has too many USB devices.
2016-06-23 07:45:31 +02:00
Ján Tomko
e9843279cc Add a test for long USB port paths
We support up to four levels of nested USB devices in the guest.

Add a test for a domain using all four and a negative test for a domain
using five.
2016-06-22 21:33:57 +02:00
John Ferlan
f06e45d578 tests: Adjust tests for encrypted storage
Make them work again...  The xml2xml had been working, but the xml2argv
were not working. Making the xml2argv work required a few adjustments to
the xml to update to more recent times.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-06-21 14:31:19 -04:00
Ján Tomko
f17a49564a Fix USB port in input-usbmouse test
The default USB controller only has two ports.
2016-06-21 18:23:56 +02:00
Andrea Bolognani
dc5821d743 qemu: Don't use legacy USB for aarch64 mach-virt guests
The '-usb' option doesn't have any effect for aarch64 mach-virt
guests, so the fact that it's currently enabled by default is not
really causing any issue.

However, that might change in the future (although unlikely), and
having it as part of the QEMU command line can cause confusion to
someone looking through the process list.

Avoid it completely, like it's already happening for q35.
2016-06-20 09:58:48 +02:00
Andrea Bolognani
86a68bdb0c qemu: Permit PCI-free aarch64 mach-virt guests
There has been some progress lately in enabling virtio-pci on
aarch64 guests; however, guest OS support is still spotty at best,
so most guests are going to be using virtio-mmio instead.

Currently, mach-virt guests are closely modeled after q35 guests,
and that includes always adding a dmi-to-pci-bridge that's just
impossible to get rid of. While that's acceptable (if suboptimal)
for q35, where you will always need some kind of PCI device anyway,
mach-virt guests should be allowed to avoid it.
2016-06-17 18:30:04 +02:00
Laine Stump
d5fb8f4564 qemu: don't add pci-bridge to Q35/arm domains unless it's needed
Until now, a Q35 domain (or arm/virt, or any other domain that has a
pcie-root bus) would always have a pci-bridge added, so that there
would be a hotpluggable standard PCI slot available to plug in any PCI
devices that might be added. This patch removes the explicit add,
instead relying on the pci-bridge being auto-added during PCI address
assignment (it will add a pci-bridge if there are no free slots).

This doesn't eliminate the dmi-to-pci-bridge controller that is
explicitly added whether or not a standard PCI slot is required (and
that is almost never used as anything other than a converter between
pcie.0's PCIe slots and standard PCI). That will be done separately.
2016-06-16 13:48:25 -04:00
Martin Kletzander
6445ad488f qemu: Add support for zero-detection writes
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-06-14 08:25:25 +02:00
Martin Kletzander
d3c784999d conf: Add support of zero-detection for disks
This option allows or disallows detection of zero-writes if it is set to
"on" or "off", respectively.  It can be also set to "unmap" in which
case it will try discarding that part of image based on the value of the
"discard" option.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-06-14 08:25:25 +02:00
Pavel Hrdina
93a2fb230a vnc: add support for listen type none
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-06-09 14:46:45 +02:00
Pavel Hrdina
c34ada0996 spice: introduce listen type none
This new listen type is currently supported only by spice graphics.
It's introduced to make it easier and clearer specify to not listen
anywhere in order to start a guest with OpenGL support.

The old way to do this was set spice graphics autoport='no' and don't
specify any ports.  The new way is to use <listen type='none'/>.  In
order to be able to migrate to old libvirt the migratable XML will be
generated without the listen element and with autoport='no'.  Also the
old configuration will be automatically converted to the this listen
type.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-06-09 14:44:08 +02:00
Pavel Hrdina
ffac505639 spice: introduce spice_auto_unix_socket config option
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-06-09 14:43:39 +02:00
Pavel Hrdina
e0c309b2dc spice: add support for listen type socket
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1335832

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-06-09 14:43:15 +02:00
Pavel Hrdina
acc83afe33 vnc: add support for listen type 'socket'
VNC graphics already supports sockets but only via 'socket' attribute.
This patch coverts that attribute into listen type 'socket'.

For backward compatibility we need to handle listen type 'socket' and 'socket'
attribute properly to support old XMLs and new XMLs.  If both are provided they
have to match, if only one of them is provided we need to be able to parse that
configuration too.

To not break migration back to old libvirt if the socket is provided by user we
need to generate migratable XML without the listen element and use only 'socket'
attribute.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-06-09 14:42:48 +02:00
Martin Kletzander
f371704708 qemuhotplugtest: Test live data
Until now, the only hot thing in this test was the name.  That's because
we set the id to '-1' before every test.  With this change, we test the
hotplug on live domains as the name suggests and as it should be.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-06-09 13:23:15 +02:00
Martin Kletzander
3484c05ce0 qemu: Add support to QXL's max_outputs parameter
Historically, we added heads=1 to videos, but for example for qxl, we
did not reflect that on the command line.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1283207

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-06-07 12:42:54 +02:00
Laine Stump
4d100c7a41 conf: permit auto-assignment of controller indexes
Hand-entering indexes for 20 PCI controllers is not as tedious as
manually determining and entering their PCI addresses, but it's still
annoying, and the algorithm for determining the proper index is
incredibly simple (in all cases except one) - just pick the lowest
unused index.

The one exception is USB2 controllers because multiple controllers in
the same group have the same index. For these we look to see if 1) the
most recently added USB controller is also a USB2 controller, and 2)
the group *that* controller belongs to doesn't yet have a controller
of the exact model we're just now adding - if both are true, the new
controller gets the same index, but in all other cases we just assign
the lowest unused index.

With this patch in place and combined with the automatic PCI address
assignment, we can define a PCIe switch with several ports like this:

  <controller type='pci' model='pcie-root-port'/>
  <controller type='pci' model='pcie-switch-upstream-port'/>
  <controller type='pci' model='pcie-switch-downstream-port'/>
  <controller type='pci' model='pcie-switch-downstream-port'/>
  <controller type='pci' model='pcie-switch-downstream-port'/>
  <controller type='pci' model='pcie-switch-downstream-port'/>
  <controller type='pci' model='pcie-switch-downstream-port'/>
  ...

These will each get a unique index, and PCI addresses that connect
them together appropriately with no pesky numbers required.
2016-05-25 15:00:25 -04:00
Ján Tomko
ea04d1a659 qemu: format SLIC ACPI table command line
<os>
  <acpi>
    <table type="slic">/path/to/acpi/table/file</table>
  </acpi>
</os>

will result in:

-acpitable sig=SLIC,file=/path/to/acpi/table/file

This option was introduced by QEMU commit 8a92ea2 in 2009.

https://bugzilla.redhat.com/show_bug.cgi?id=1327537
2016-05-25 17:15:21 +02:00
Ján Tomko
72f652da63 conf: add <acpi><table> to <os>
Add a new element to <domain> XML:
<os>
  <acpi>
    <table type="slic">/path/to/acpi/table/file</table>
  </acpi>
</os>

To supply a path to a SLIC (Software Licensing) ACPI
table blob.

https://bugzilla.redhat.com/show_bug.cgi?id=1327537
2016-05-25 17:15:21 +02:00
Ján Tomko
ec9d19952a tests: always assume QEMU_CAPS_DRIVE_READONLY 2016-05-23 10:34:16 +02:00
Ján Tomko
b88f5f1af9 tests: remove <readonly/> from IDE disks
Read-only IDE disks are not supported, but the error
is raised only when QEMU_CAPS_DRIVE_READONLY is set.
2016-05-23 09:39:40 +02:00
Ján Tomko
1e463880c9 tests: remove disk-drive-fat test
This test requests a read-only virtual FAT drive on the IDE bus.
Read-only IDE drives are unsupported, but libvirt only displays
the error if it has the QEMU_CAPS_DRIVE_READONLY capability.
Read-write FAT drives are also unsupported.
2016-05-23 09:39:40 +02:00
Cole Robinson
f3d5e255cb tests: qemu: test <address type='pci'/> with aarch64
This is an interesting test case since PCI isn't the default for
aarch64.
2016-05-20 13:54:26 -04:00
Laine Stump
c026f8f1c2 qemu: auto-assign addresses when <address type='pci'/> is specified
Rather than only assigning a PCI address when no address is given at
all, also do it when the config says that the address type is 'pci',
but it gives no address (virDeviceInfoPCIAddressWanted()).

There are also several places after parsing but prior to address
assignment where code previously expected that any info with address
type='pci' would have a *valid* PCI address, which isn't always the
case - now we check not only for type='pci', but also for a valid
address (virDeviceInfoPCIAddressPresent()).

The test case added in this patch was directly copied from Cole's patch titled:

    qemu: Wire up address type=pci auto_allocate
2016-05-20 13:54:26 -04:00
John Ferlan
a1344f70a1 qemu: Utilize qemu secret objects for RBD auth/secret
https://bugzilla.redhat.com/show_bug.cgi?id=1182074

If they're available and we need to pass secrets to qemu, then use the
qemu domain secret object in order to pass the secrets for RBD volumes
instead of passing the base64 encoded secret on the command line.

The goal is to make AES secrets the default and have no user interaction
required in order to allow using the AES mechanism. If the mechanism
is not available, then fall back to the current plain mechanism using
a base64 encoded secret.

New APIs:

qemu_domain.c:
  qemuDomainGetSecretAESAlias:
    Generate/return the secret object alias for an AES Secret Info type.
    This will be called from qemuDomainSecretAESSetup.

  qemuDomainSecretAESSetup: (private)
    This API handles the details of the generation of the AES secret
    and saves the pieces that need to be passed to qemu in order for
    the secret to be decrypted. The encrypted secret based upon the
    domain master key, an initialization vector (16 byte random value),
    and the stored secret. Finally, the requirement from qemu is the IV
    and encrypted secret are to be base64 encoded.

qemu_command.c:
  qemuBuildSecretInfoProps: (private)
    Generate/return a JSON properties object for the AES secret to
    be used by both the command building and eventually the hotplug
    code in order to add the secret object. Code was designed so that
    in the future perhaps hotplug could use it if it made sense.

  qemuBuildObjectSecretCommandLine (private)
    Generate and add to the command line the -object secret for the
    secret. This will be required for the subsequent RBD reference
    to the object.

  qemuBuildDiskSecinfoCommandLine (private)
    Handle adding the AES secret object.

Adjustments:

qemu_domain.c:
  The qemuDomainSecretSetup was altered to call either the AES or Plain
  Setup functions based upon whether AES secrets are possible (we have
  the encryption API) or not, we have secrets, and of course if the
  protocol source is RBD.

qemu_command.c:
  Adjust the qemuBuildRBDSecinfoURI API's in order to generate the
  specific command options for an AES secret, such as:

    -object secret,id=$alias,keyid=$masterKey,data=$base64encodedencrypted,
            format=base64
    -drive file=rbd:pool/image:id=myname:auth_supported=cephx\;none:\
           mon_host=mon1.example.org\:6321,password-secret=$alias,...

  where the 'id=' value is the secret object alias generated by
  concatenating the disk alias and "-aesKey0". The 'keyid= $masterKey'
  is the master key shared with qemu, and the -drive syntax will
  reference that alias as the 'password-secret'. For the -drive
  syntax, the 'id=myname' is kept to define the username, while the
  'key=$base64 encoded secret' is removed.

  While according to the syntax described for qemu commit '60390a21'
  or as seen in the email archive:

    https://lists.gnu.org/archive/html/qemu-devel/2016-01/msg04083.html

  it is possible to pass a plaintext password via a file, the qemu
  commit 'ac1d8878' describes the more feature rich 'keyid=' option
  based upon the shared masterKey.

Add tests for checking/comparing output.

NB: For hotplug, since the hotplug code doesn't add command line
    arguments, passing the encoded secret directly to the monitor
    will suffice.
2016-05-20 11:09:05 -04:00
Pavel Hrdina
858d7b6cf0 qemu_command: move sasl parameter after port and addr definition
This is required for following patches where new listen types will be
introduced.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-05-20 10:14:36 +02:00
Pavel Hrdina
2faa13560c tests: cleanup vnc auto socket test
Commit 55320c23 introduced a new test for VNC to test if
vnc_auto_unix_socket is set in qemu.conf, but forget to enable it in
qemuxml2argvtest.c.

This patch also moves the code in qemuxml2xmltest.c next to other VNC
tests and refactor the test so we also check the case for parsing active
XML.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-05-20 10:05:55 +02:00
Jiri Denemark
3a7cd180a5 cpu_x86: Use array of features in CPU map
There's no reason for keeping the features in a linked list. Especially
when we know upfront the total number of features we are loading.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2016-05-20 09:18:56 +02:00
Ján Tomko
936b86528d Remove DISK_BUS_XEN support from qemuBuildDiskDriveCommandLine
We have stopped supporting Xenner some time ago.
2016-05-20 09:02:08 +02:00
Andrea Bolognani
f6ececa68d tests: Try different usable GIC versions
The only case where the hardware capabilities influence the result
is when no <gic/> element was provided.

The test programs now ensure both that the correct GIC version is
picked in that case, and that hardware capabilities are not taken
into account when the user has already picked a GIC version.
2016-05-18 11:27:56 +02:00
Cole Robinson
e3a6859019 qemu: command: Use -name guest= if available
-name guest= is the explicit parameter for passing a VM name. Using
it is required to allow a VM with an '=' in the name

https://bugzilla.redhat.com/show_bug.cgi?id=1276485
2016-05-16 10:30:38 -04:00
Cole Robinson
7dbbc0ca07 qemu: command: escape commas in chardev socket path
After this, a default virt-manager VM will startup with a comma
in the VM name:

https://bugzilla.redhat.com/show_bug.cgi?id=639926
2016-05-16 10:30:38 -04:00
Cole Robinson
077ba95677 qemu: command: escape commas in VNC socket path
This path can be dependent on the VM libdir, which contains its name
2016-05-16 10:30:38 -04:00
Cole Robinson
3153ac08c9 qemu: command: escape commas in secret master path
Need to convert the local function to virBuffer usage, so we
can use qemuBufferEscapeComma
2016-05-16 10:30:38 -04:00
Cole Robinson
0f377eb1b0 qemu: command: escape commas in VM name
This isn't sufficient on its own, since the VM name is used for things
like monitor paths, which we don't escape yet
2016-05-16 10:30:38 -04:00
Laine Stump
e5aecc2f80 conf: log error when incorrect PCI root controller is added to domain
libvirt may automatically add a pci-root or pcie-root controller to a
domain, depending on the arch/machinetype, and it hopefully always
makes the right decision about which to add (since in all cases these
controllers are an implicit part of the virtual machine).

But it's always possible that someone will create a config that
explicitly supplies the wrong type of PCI controller for the selected
machinetype. In the past that would lead to an error later when
libvirt was trying to assign addresses to other devices, for example:

  XML error: PCI bus is not compatible with the device at
  0000:00:02.0. Device requires a PCI Express slot, which is not
  provided by bus 0000:00

(that's the error message that appears if you replace the pcie-root
controller in a Q35 domain with a pci-root controller).

This patch adds a check at the same place that the implicit
controllers are added (to ensure that the same logic is used to check
which type of pci root is correct). If a pci controller with index='0'
is already present, we verify that it is of the model that we would
have otherwise added automatically; if not, an error is logged:

  The PCI controller with index='0' must be " model='pcie-root' for
  this machine type, " but model='pci-root' was found instead.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1004602
2016-05-10 17:03:24 -04:00
Pavel Hrdina
9f51c1c7c7 graphics: generate fake ports also for tests
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-05-10 10:44:45 +02:00
John Ferlan
d0b5845952 qemu: Add 'iothread' to command line for supported controller
https://bugzilla.redhat.com/show_bug.cgi?id=1286709

Now that we have all the pieces in place, we can add the 'iothread=#' to
the command line for the (two) controllers that support it (virtio-scsi-pci
and virtio-scsi-ccw). Add the tests as well...
2016-05-04 09:59:14 -04:00
John Ferlan
e0d0e53086 conf: Add support for virtio-scsi iothreads
Add the ability to add an 'iothread' to the controller which will be how
virtio-scsi-pci and virtio-scsi-ccw iothreads have been implemented in qemu.

Describe the new functionality and add tests to parse/validate that the
new attribute can be added.
2016-05-04 09:59:14 -04:00
Cole Robinson
600977e293 qemu: support configuring usb3 controller port count
This adds a ports= attribute to usb controller XML, like

  <controller type='usb' model='nec-xhci' ports='8'/>

This maps to:

  qemu -device nec-usb-xhci,p2=8,p3=8

Meaning, 8 ports that support both usb2 and usb3 devices. Gerd
suggested to just expose them as one knob.

https://bugzilla.redhat.com/show_bug.cgi?id=1271408
2016-05-03 08:58:30 -04:00
Boris Fiuczynski
383c6f7f4d tests: add tests for panic device model s390
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
2016-05-02 17:01:40 +02:00
Martin Kletzander
55320c23dd qemu: Regenerate VNC socket paths
Similarly to what commit 7140807917 did with some internal paths,
clear vnc socket paths that were generated by us.  Having such path in
the definition can cause trouble when restoring the domain.  The path is
generated to the per-domain directory that contains the domain ID.
However, that ID will be different upon restoration, so qemu won't be
able to create that socket because the directory will not be prepared.

To be able to migrate to older libvirt, skip formatting the socket path
in migratable XML if it was autogenerated.  And mark it as autogenerated
if it already exists and we're parsing live XML.

Best viewed with '-C'.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1326270

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-04-28 16:13:45 +02:00
Cole Robinson
67f2b72723 conf: Drop restrictions on rng backend path
Currently we only allow /dev/random and /dev/hwrng as host input
for <rng><backend model='random'/> device. This was added after
various upstream discussions in commit 4932ef45

However this restriction has generated quite a few complaints over
the years, so a new discussion was initiated:

http://www.redhat.com/archives/libvir-list/2016-April/msg00987.html

Several people suggested removing the restriction, and nobody really
spoke up to defend it. So this patch drops the path restriction
entirely

https://bugzilla.redhat.com/show_bug.cgi?id=1074464
2016-04-26 11:43:33 -04:00
Cole Robinson
600a666ce5 schema: Allow space character in disk vendor/product
The hex range already tried to allow for it, but it wasn't using
the correct XML hex syntax. Fix it, and test it
2016-04-26 10:29:44 -04:00
John Ferlan
dd1400280e tests: Fix syntax in iSCSI auth/secret tests
While working on the tests for the secret initialization vector, I found
that the existing iSCSI tests were lacking in how they defined the IQN.
Many had IQN's of just 'iqn.1992-01.com.example' for one disk while using
'iqn.1992-01.com.example/1' for the second disk (same for hostdevs - guess
how they were copied/generated).

Typically (and documented this way), IQN's would include be of the form
'iqn.1992-01.com.example:storage/1' indicating an IQN using "storage" for
naming authority specific string and "/1" for the iSCSI LUN.

So modify the input XML's to use the more proper format - this of course
has a ripple effect on the output XML and the args.

Also note that the "%3A" is generated by the virURIFormat/xmlSaveUri
to represent the colon.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-04-18 12:31:50 -04:00
Laine Stump
8b62c65d24 qemu: support new pci controller model "pcie-expander-bus"
This is backed by the qemu device pxb-pcie, which will be available in
qemu 2.6.0.

As with pci-expander-bus (which uses qemu's pxb device), the busNr
attribute and <node> subelement of <target> are used to set the bus_nr
and numa_node options.

During post-parse we validate that the domain's machinetype is
q35-based (since the device shows up for 440fx-based machinetypes, but
is unusable), as well as checking that <node> specifies a node that is
actually configured on the guest.
2016-04-14 14:00:34 -04:00
Laine Stump
bc07251f59 conf: new pci controller model pcie-expander-bus
This controller provides a single PCIe port on a new root. It is
similar to pci-expander-bus, intended to provide a bus that can be
associated with a guest-identifiable NUMA node, but is for
machinetypes with PCIe rather than PCI (e.g. q35-based machinetypes).

Aside from PCIe vs. PCI, the other main difference is that a
pci-expander-bus has a companion pci-bridge that is automatically
attached along with it, but pcie-expander-bus has only a single port,
and that port will only connect to a pcie-root-port, or to a
pcie-switch-upstream-port. In order for the bus to be of any use in
the guest, it must have either a pcie-root-port or a
pcie-switch-upstream-port attached (and one or more
pcie-switch-downstream-ports attached to the
pcie-switch-upstream-port).
2016-04-14 14:00:34 -04:00