Validate that we are able to parse back the dotted syntax arrays we were
generating in the pre-blockdev era.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For the few instances where we'd generate an array in dotted syntax we
should be able to parse it back. Add another step in deflattening of the
dotted syntax which reconstructs the arrays so that the backing store
parser can parse it.
https://bugzilla.redhat.com/show_bug.cgi?id=1466177
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extract the code so that there's a clean separation once we'll want do
do other steps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory handling to remove the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virBitmapNewEmpty can't fail now so we can make it obvious and fix all
callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virStorageEncryptionSecretPtr may have a string inside it, thus we must
copy the string too. Use virSecretLookupDefCopy to do that.
Caused by non-obvious code introduced in 756b46ddd2 and later 47e88b33b
which added a string that needed to be copied.
https://bugzilla.redhat.com/show_bug.cgi?id=1814923
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function always returns succes so there's no need for a return
value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuBlockStorageSourceGetFormatRawProps aggregated both formats but
since we now have props specific for either of those formats it's
unwanted to aggregate the code such way. Split out the 'luks' props
formatter into qemuBlockStorageSourceGetFormatLUKSProps.
The wrong separation demonstrates istself on formatting of the 'size'
and 'offset' attributes for the 'luks' driver which does not conform
to the qapi schema.
https://bugzilla.redhat.com/show_bug.cgi?id=1814975
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'luks' driver in qemu is as any other non-raw format driver and thus
doesn't support the properties for 'slice'. Since libvirt considers
luks files to be raw+encryption we need to special case them when
dealing with the slice.
https://bugzilla.redhat.com/show_bug.cgi?id=1814975
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce qemuBlockStorageSourceNeedsStorageSliceLayer which will hold
the decision logic and fix all places that open-code it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since libvirt handles the luks encryption in a weird special way
(raw+encryption) we should really test that case with slices as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A fixup to patch [1]. We need to reset await_event in all
error paths.
[1] 52532073d : qemu: remove redundant needReply argument of qemuAgentCommand
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In one of my previous commits I've introduced code that creates
all devices for given (possible) multipath target. But I've made
a mistake there - the code accesses 'next->path' without checking
if the disk source is local. Note that the 'next->path' is
NULL/doesn't make sense for VIR_STORAGE_TYPE_NVME.
Fixes: a30078cb83
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1814947
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since the removal of gnulib, HAVE_SOCKETPAIR is no more defined, making
these two tests effectively skipped.
Use the same strategy used in other generic library bits, i.e. exclude
the socketpair usage on Windows.
Semi-related change in virnetdaemontest.c to make it build: since
virutil.h does not include unistd.h anymore, we need to include it.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It seems like CD-ROMs may have no 'fileName' property specified in case
there is nothing configured as attachment for the drive. Hence, make
sure that virVMXParseDisk() do not consider it mandatory anymore,
considering it an empty block cdrom device. Sadly virVMXParseDisk() is
used also to parse disk and floppies, so make sure that a NULL fileName
is handled in cdrom- and floppy-related paths.
https://bugzilla.redhat.com/show_bug.cgi?id=1808610
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Move earlier the checks for skipping a hard disk when parsing a CD-DROM,
and for skipping a CD-ROM when parsing a hard disk. This should have no
behaviour changes, and avoids to add repeated checks in following
commits.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Many calls of qemuMonitorDelObject don't actually check the return value
or report the error from the object deletion itself since they are on
cleanup paths. In some cases this can lead to reporting of spurious
errors e.g. when qemuMonitorDelObject is used to clean up a possibly
pre-existing objects.
Add a new argument for qemuMonitorDelObject which controls whether
the internals report errors from qemu and fix all callers accordingly.
Note that some of the cases on device unplug which check the error code
don't in fact propagate the error to the user, but in this case it is
important to add the log entry anyways for tracing that the device
deletion failed.
https://bugzilla.redhat.com/show_bug.cgi?id=1784040
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In some cases we'll need to check whether there was an error but avoid
reporting an actual libvirt error. Rename qemuMonitorJSONCheckError to
qemuMonitorJSONCheckErrorFull with a new flag to suppress the error
reporting and add a wrapper with the original name so that callers don't
need to be fixed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use 'g_autoptr' and remove the cleanup label and ret variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When changing media we'd attempt to remove the managed pr daemon even if
neither of the images involved in the media change used it. This caused
libvirtd to log a spurious error:
2020-03-18 01:41:19.832+0000: 643207: error : qemuMonitorJSONCheckError:412 : internal error: unable to execute QEMU command 'object-del': object 'pr-helper0' not found
With this patch we completely avoid calling the deletion code.
https://bugzilla.redhat.com/show_bug.cgi?id=1814486
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The loop which checks whether the vcpus are in proper configuration for
the requested hot(un)plug skips the first modified vcpu. This means
that 'firstvcpu' which is used to print the error message in case the
configuration is not suitable would never point to the first modified
vcpu.
In cases such as:
<vcpu placement='auto' current='5'>8</vcpu>
<vcpus>
<vcpu id='0' enabled='yes' hotpluggable='no'/>
<vcpu id='1' enabled='yes' hotpluggable='no'/>
<vcpu id='2' enabled='yes' hotpluggable='no'/>
<vcpu id='3' enabled='yes' hotpluggable='no'/>
<vcpu id='4' enabled='yes' hotpluggable='no'/>
<vcpu id='5' enabled='no' hotpluggable='yes'/>
<vcpu id='6' enabled='no' hotpluggable='yes'/>
<vcpu id='7' enabled='no' hotpluggable='yes'/>
</vcpus>
# virsh setvcpu --config --disable upstream 1
error: invalid argument: vcpu '-1' can't be modified as it is followed by non-hotpluggable online vcpus
After this fix the proper vcpu is reported in the error message:
# virsh setvcpu --config --disable upstream 1
error: invalid argument: vcpu '1' can't be modified as it is followed by non-hotpluggable online vcpu
https://bugzilla.redhat.com/show_bug.cgi?id=1611061
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
So far, when using the qemu:///embed driver, management
applications can't chose whether they want to register their
domains in machined or not. While having that option is certainly
desired, it will require more work. What we can do meanwhile is
to generate names that include part of hash of the root
directory. This is to ensure that if two applications using
different roots but the same domain name (and ID) start the
domain no clashing name for machined is generated.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
When initializing virQEMUDriverConfig structure we are given the
root directory for possible embed connection. Save it for future
use. While we could get it later from @uri member, it's not as
easy as dereferencing a pointer (virURIParse() +
virURIGetParam() + error reporting).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The check attribute was completely ignored for host-passthrough CPUs
even if they explicitly requested some features to be enabled. For
example, a domain with the following CPU definition
<cpu mode='host-passthrough' check='full'>
<feature policy='require' name='svm'/>
</cpu>
would happily start even when 'svm' cannot be enabled.
Let's call virCPUArchUpdateLive for host-passthrough CPUs with
VIR_CPU_CHECK_FULL to make sure the architecture specific code can
validate the provided virtual CPU against the desired definition.
https://bugzilla.redhat.com/show_bug.cgi?id=1515677
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Adding more checks into the existing if statements would turn them into
an unreadable mess.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The updateLive CPU sub-driver function is supposed to be called only for
a subset of CPU definitions. Let's make it more obvious by turning a
negative test and return into a positive check.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This commit is related to RTC timer device too. HPET is being shared
from host device through `localtime` clock. This timer is available
creating a new timer using `hpet` name.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This commit share host Real Time Clock device (rtc) into LXC containers
to support hardware clock. This should be available setting up a `rtc`
timer under clock section. Since this option is not emulated, it should
be available only for `localtime` clock. This option should be readonly
due to security reasons.
Before:
root# hwclock --verbose
hwclock from util-linux 2.32.1
System Time: 1581877557.598365
Trying to open: /dev/rtc0
Trying to open: /dev/rtc
Trying to open: /dev/misc/rtc
No usable clock interface found.
hwclock: Cannot access the Hardware Clock via any known method.
Now:
root# hwclock
2020-02-16 18:23:55.374134+00:00
root# hwclock -w
hwclock: ioctl(RTC_SET_TIME) to /dev/rtc to set the time failed:
Permission denied
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some branches were not covered and thus we didn't catch that the bitmaps
are not re-enabled if nothing is merged into them. Two bitmaps are
necessary to reliably test the case due to hash table ordering.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
The function repeatedly checked the first element rather than iterating
through the array.
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Allocate space also for the terminating NULL.
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Some of the node device APIs are a little odd because they accept a
virNodeDevicePtr object but are still implemented by the virt drivers.
The first thing the virt drivers need to do is get the XML config
associated with the node device, and that means talking to the node
device driver.
This worked previously because with monolithic libvirtd, both the
virt driver and node device driver were in the same daemon and thus
a single virConnectPtr can talk to both drivers.
With the split daemon world though, the virNodeDevicePtr passed into
the APIs is associated with the QEMU driver virConnectPtr, which has
no ability to invoke APIs against the node device driver. We must thus
get a duplicate virNodeDevicePtr object which is associated with a
virConnectPtr for the node device driver.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The node device APIs are a little unusual because we don't use a
"remote_nonnull_node_device" object on the wire, instead we just
have a "remote_string" for the device name. This meant dispatcher
code generation needed special cases. In doing so we mistakenly
used the virNodeDeviceLookupByName() API which gets dispatched
into the driver, instead of get_nonnull_node_device() which
directly populates a virNodeDevicePtr object.
This wasn't a problem with monolithic libvirtd, as the
virNodeDeviceLookupByName() API call was trivially satisfied
by the registered driver, albeit with an extra (undesirable)
authentication check. With the split daemons, the call to
virNodeDeviceLookupByName() fails in virtqemud, because the
node device driver obviously doesn't exist in that daemon.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Despite their names, the following APIs:
virNodeDeviceDettach
virNodeDeviceDetachFlags
virNodeDeviceReAttach
virNodeDeviceReset
are all handled by the virt drivers, not the node device driver.
A bug in the RPC generator meant that these APIs were sent to
the nodedev driver for handling. This caused breakage with the
split daemons, since nothing was available to process them.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 7b79ee2f78 makes assumptions about die_id parsing in
the sysfs that aren't true for Power hosts. In both Power8
and Power9, running 5.6 and 4.18 kernel respectively,
'die_id' is set to -1:
$ cat /sys/devices/system/cpu/cpu0/topology/die_id
-1
This breaks virHostCPUGetDie() parsing because it is trying to
retrieve an unsigned integer, causing problems during VM start:
virFileReadValueUint:4128 : internal error: Invalid unsigned integer
value '-1' in file '/sys/devices/system/cpu/cpu0/topology/die_id'
This isn't necessarily a PowerPC only behavior. Linux kernel commit
0e344d8c70 added in the former Documentation/cputopology.txt, now
Documentation/admin-guide/cputopology.rst, that:
To be consistent on all architectures, include/linux/topology.h
provides default definitions for any of the above macros that are
not defined by include/asm-XXX/topology.h:
1) topology_physical_package_id: -1
2) topology_die_id: -1
(...)
This means that it might be expected that an architecture that
does not implement the die_id element will mark it as -1 in
sysfs.
It is not required to change die_id implementation from uInt to
Int because of that. Instead, let's change the parsing of the
die_id in virHostCPUGetDie() to read an integer value and, in
case it's -1, default it to zero like in case of file not found.
This is enough to solve the issue Power hosts are experiencing.
Fixes: 7b79ee2f78
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
During startup the udev node device driver impl uses a background thread
to populate the list of devices to avoid blocking the daemon startup
entirely. There is no synchronization to the public APIs, so it is
possible for an application to start calling APIs before the device
initialization is complete.
This was not a problem in the old approach where libvirtd was started
on boot, as initialization would easily complete before any APIs were
called.
With the use of socket activation, however, APIs are invoked from the
very moment the daemon starts. This is easily seen by doing a
'virsh -c nodedev:///system list'
the first time it runs it will only show one or two devices. The second
time it runs it will show all devices. The solution is to introduce a
flag and condition variable for APIs to synchronize against before
returning any data.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Don't rely on error check and assign hostname only when non-NULL.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If a block-commit fails we should at least re-enable the bitmaps so that
the operation can be re-tried.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Merge the bitmaps into base of the block commit after the job finishes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Active layer block commit makes the 'base' image the new top image of
the disk after it finishes. This means that all bitmap operations need
to be handled prior to this happening as we'd lose writes otherwise.
The ideal place is to handle it when pivoting to the new image as only
guest-writes would be happening after this point.
Use qemuBlockBitmapsHandleCommitFinish to calculate the merging
transaction.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
On start of the commit job, we need to disable any active bitmap in the
base. Use qemuBlockBitmapsHandleCommitStart to calculate which and call
the appropriate QMP APIs. We use blockdev-reopen to make the 'base'
writable to disable the bitmaps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add an argument to qemuBlockJobDiskNewCommit to propagate the list of
disabled bitmaps into the job data structure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Use the 'snapshots-synthetic-broken' test data for block-commit.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Test handling of more complex cases of merging bitmaps accross
snapshots.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add code for testing the two necessary steps of handling bitmaps during
block commit and exercise the code on the test data which we have for
bitmap handling.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
