Generated using the following spatch:
@@
expression path;
@@
- virFileMakePath(path)
+ g_mkdir_with_parents(path, 0777)
However, 14 occurrences were not replaced, e.g. in
virHostdevManagerNew(). I don't really understand why.
Fixed by hand afterwards.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our implementation was inspired by glib anyways. The difference is only
the order of arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Our implementation was heavily inspired by the glib version so it's a
drop-in replacement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, nmdm console device requires user to specify master and slave
path attributes (such as /dev/nmdm0A and /dev/nmdm0B respectively).
However, making user find a non-occupied device name might be not
convenient, especially for the remote connections.
Update the logic to make these attributes optional. In case if not
specified, use /dev/nmdm$UUID[AB], where $UUID is a domain's UUID.
With this schema it's unlikely nmdm device will clash with other domains
or even other non-bhyve nmdm devices.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, requesting domain capabilities fails when the specified
emulator binary does not equal to "/usr/sbin/bhyve". As we're
not using user-specified emulator anyway, drop this check to avoid
showing errors for values like "bhyve" (without absolute path).
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The FreeBSD version of virNetDevTapCreate() now calls
virNetDevGenerateName(), and virNetDevGenerateName() understands that
a blank ifname should be replaced with a generated name based on a
device-type-specific template - so there is no longer any need for the
higher level functions to stuff a template name ("vnet%d") into
ifname.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extract ReserveName/GenerateName from netdevtap and netdevmacvlan as
common helper functions.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Laine Stump <laine@redhat.com>
virDomainDefPostParse infrastructure has apart from the global opaque
data also per-run data, but this was not duplicated into the validation
callbacks.
This is important when drivers want to use correct run-state for the
validation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All of these conversions are trivial - VIR_DIR_CLOSE() (aka
virDirClose()) is called only once on the DIR*, and it happens just
before going out of scope.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add the proper video device type when parsing bhyve's commandline into a
XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
For the virtio-9p bhyve command line argument, the proper order
is mount_tag=/path/to/host/dir, not the opposite.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Recently virtio-9p support was added to bhyve.
On the host side it looks this way:
bhyve .... -s 25:0,virtio-9p,sharename=/path/to/shared/dir
It could also have ",ro" suffix to make share read-only.
In the Linux guest, this share is mounted with:
mount -t 9p sharename /mnt/sharename
In the guest user will see the same permissions and ownership
information for this directory as on the host. No uid/gid remapping is
supported, so those could resolve to wrong user or group names.
The same applies to the other side: chowning/chmodding in the guest will
set specified ownership and permissions on the host.
In libvirt domain XML it's modeled using the 'filesystem' element:
<filesystem type='mount'>
<source dir='/path/to/shared/dir'/>
<target dir='sharename'/>
</filesystem>
Optional 'readonly' sub-element enables read-only mode.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We don't use the lib prefix for all libraries but in these cases it
makes sense to use the prefix.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This adds a new value to virConnectCompareCPUFlags,
"VIR_CONNECT_CPU_VALIDATE_XML", that governs XML document validation in
virCPUDefParseXML.
In src/conf/cpu_conf.c, include configmake.h for PKGDATADIR and
virfile.h for virFileFindResource.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Support setting a password for the VNC framebuffer using the passwd
attribute on the <graphics/> element, if the driver has the
BHYVE_CAP_VNC_PASSWORD capability.
Note that virsh domxml-from-native does not output the password in the
generated XML, as VIR_DOMAIN_DEF_FORMAT_SECURE is not set when
formatting the domain definition.
Signed-off-by: Fabian Freyer <fabian.freyer@physik.tu-berlin.de>
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introduces the BHYVE_CAP_VNC_PASSWORD capability, which is probed by
parsing the error message from the bhyve command. When it is not
supported, bhyve -s 0,fbuf,password= will return an error message.
Signed-off-by: Fabian Freyer <fabian.freyer@physik.tu-berlin.de>
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The resolution of the VNC framebuffer can now be set via the resolution
definition introduced in 5.9.0.
Also, add "gop" to the list of model types the <resolution/>
sub-element is valid for.
Signed-off-by: Fabian Freyer <fabian.freyer@physik.tu-berlin.de>
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a new helper function, bhyveParsePCIFbuf, to parse the bhyve-argv
parameters for a frame-buffer device to <graphics/> and <video/>
definitions.
For now, only the listen address, port, and vga mode are detected.
Unsupported parameters are silently skipped.
This involves upgrading the private API to expose the
virDomainGraphicsDefNew helper function, which is used by
bhyveParsePCIFbuf.
Signed-off-by: Fabian Freyer <fabian.freyer@physik.tu-berlin.de>
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Currently, slot 1 is only allowed to be used by the LPC device.
Relax this requirement and allow to use slot 1 if it was explicitly
specified by the user for any other device type. In this case the LPC
device will have the next available address.
If slot 1 was not used by the user, it'll be reserved for the LPC
device, even if it is not configured to make address assignment
consistent in case the LPC device becomes necessary (e.g. the user
adds a console or a video device which require LPC).
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Support modeling of the 'isa' controller for bhyve. User can manually
define any PCI slot for the 'isa' controller, including PCI slot 1,
but other devices are not allowed to use this address.
When domain configuration requires the 'isa' controller to be present,
automatically add it on domain post-parse stage.
Now, as this controller is always available when needed, it's not
necessary to implicitly add it to the bhyve command line, so remove
bhyveBuildLPCArgStr().
Also, make bhyveDomainDefNeedsISAController() static as it's no longer
used outside of bhyve_domain.c.
As more than one ISA controller is not supported by bhyve,
and multiple controllers with the same index are forbidden,
so forbid ISA controllers with non-zero index for bhyve.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We are currently adding -lutil and -lkvm to the linker using the
add_project_link_arguments method. On FreeBSD 11.4, this results in
build errors because the args appear too early in the command line.
We need to pass the libraries as dependencies so that they get placed
at the same point in the linker args as other dependencies.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Allow to map sound playback and recording devices to host devices
using "<audio type='oss'/>" OSS audio backend.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
bhyve supports intel hda sound devices that could be specified
on the command like using "-1:0,hda,play=$play_dev,rec=$rec_dev",
where "1:0" is a PCI address, and "$play_dev" and "$rec_dev"
point to the playback and recording device on the host respectively.
Currently, schema of the 'sound' element doesn't allow specifying
neither playback nor recording devices, so for now hardcode
/dev/dsp0, which is the first audio device on the host.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Most of our augeas files are generated during meson setup into build
directory and we were running augeas tests only for these files.
However, we have some other augeas and config files that are not
modified during meson setup and they are only in source directories.
In order to run tests for these files we need to provide different path
to both source and build directories.
Reported-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
src/bhyve/bhyve_parse_command.c:437:9: warning: Either the condition
'!config' is redundant or there is possible null pointer dereference:
config. [nullPointerRedundantCheck]
src/bhyve/bhyve_parse_command.c:280:23: warning: Either the condition
'!separator' is redundant or there is pointer arithmetic
with NULL pointer. [nullPointerArithmeticRedundantCheck]
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Both accept a NULL value gracefully and virStringFreeList
does not zero the pointer afterwards, so a straight replace
is safe.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
EXTRA_DIST is not relevant because meson makes a git copy when creating
dist archive so everything tracked by git is part of dist tarball.
The remaining ones are not converted to meson files as they are
automatically tracked by meson.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
In most cases this eliminates one or more calls to
virBufferClearAndReset(), but even when it doesn't it's better because:
1) it makes the code more consistent, making it more likely that new
contributors who are "learning by example" will to the right thing.
2) it protects against future modifications that might have otherwise
needed to add a virBufferClearAndReset()
3) Currently some functions don't call virBufferClearAndReset() only
because they're relying on some subordinate function to call it for
them (e.g. bhyveConnectGetSysinfo() in this patch relies on
virSysinfoFormat() to clear out the buffer when there is an
error). I think this is sloppy behavior, and that the toplevel
function that defines and initializes the buffer should be the
function clearing it at the end.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fixes build error introduced in
commit aa15e9259f
Author: Laine Stump <laine@redhat.com>
Date: Sun Apr 5 22:40:37 2020 -0400
qemu/conf: set HOTPLUGGABLE connect flag during PCI address set init
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This fixes a FreeBSD build error from
commit a11a0e6e84
Author: Rafael Fonseca <r4f4rfs@gmail.com>
Date: Tue Mar 24 17:14:30 2020 +0100
bhyve: move video default logic to driver
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The logic setting a device default should be in the post parse function
of individual driver code.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Include virutil.h in all files that use it,
instead of relying on it being pulled in somehow.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When moving virclosecallbacks to src/hypervisor, I did not
adjust all the possible includes in Makefiles.
Use a path relative to src to fix the build.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 25c29ac2f5
This *is* a no-op, but there was a period of sickening dread while
auditing to be sure that no actual confusion between bus and slot had
occurred. I hope to avoid that by following the conventional order.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Reduce the complexity by isolating loop bodies in separate functions.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
