The variable holds formatted suffix to each line printed out
(address type, address and prefix). However, the variable is
never freed. At the same time, honour fact, that data held in
the variable is not constant.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we allow HW address to be not present on our RPC layer,
don't error out if qemu-ga hasn't provided any.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Make sure we don't print (null) (which in fact is printf()'s
cleverness anyway, not ours). If no HW address is present, print
"N/A" string just like we do for other fields.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Not all NICs (esp. the virtual ones like TUN) must have a hardware
address. Teach our RPC that it's possible.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1199182 documents that
after a series of disk snapshots into existing destination images,
followed by active commits of the top image, it is possible for
qemu 2.2 and earlier to end up tracking a different name for the
image than what it would have had when opening the chain afresh.
That is, when starting with the chain 'a <- b <- c', the name
associated with 'b' is how it was spelled in the metadata of 'c',
but when starting with 'a', taking two snapshots into 'a <- b <- c',
then committing 'c' back into 'b', the name associated with 'b' is
now the name used when taking the first snapshot.
Sadly, older qemu doesn't know how to treat different spellings of
the same filename as identical files (it uses strcmp() instead of
checking for the same inode), which means libvirt's attempt to
commit an image using solely the names learned from qcow2 metadata
fails with a cryptic:
error: internal error: unable to execute QEMU command 'block-commit': Top image file /tmp/images/c/../b/b not found
even though the file exists. Trying to teach libvirt the rules on
which name qemu will expect is not worth the effort (besides, we'd
have to remember it across libvirtd restarts, and track whether a
file was opened via metadata or via snapshot creation for a given
qemu process); it is easier to just always directly ask qemu what
string it expects to see in the first place.
As a safety valve, we validate that any name returned by qemu
still maps to the same local file as we have tracked it, so that
a compromised qemu cannot accidentally cause us to act on an
incorrect file.
* src/qemu/qemu_monitor.h (qemuMonitorDiskNameLookup): New
prototype.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDiskNameLookup):
Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorDiskNameLookup): New function.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDiskNameLookup)
(qemuMonitorJSONDiskNameLookupOne): Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit)
(qemuDomainBlockJobImpl): Use it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Use the utilities introduced in the previous patches so the qemu
driver is able to create tap devices that are bound (and unbound
on domain destroyal) to Midonet virtual ports.
Signed-off-by: Antoni Segura Puimedon <toni+libvirt@midokura.com>
Midonet is an opensource virtual networking that over lays the IP
network between hypervisors. Currently, such networks can be made
with the openvswitch virtualport type.
This patch, defines the schema and documentation that will serve
as basis for the follow up patches that will add support to libvirt
for using Midonet virtual ports for its interfaces. The schema
definition requires that the port profile expresses its interfaceid
as part of the port profile. For that reason, this is part of the
patch too.
Signed-off-by: Antoni Segura Puimedon <toni+libvirt@midokura.com>
Adds the port type definitions and methods that will be used to bind
interfaces to the Midonet virtual ports.
virtnetdevmidonet.c adds the way to bind and unbind the ports by
calling into the Midonet Host Agent control command line (installed
with the midolman package).
Signed-off-by: Antoni Segura Puimedon <toni+libvirt@midokura.com>
Previously we had to check for 3 fields to see if the source was filled.
Repurpose one of the variables as a boolean flag and use it instead of
combining multiple sources.
For the condition that checks that only CDROM/FLOPPY drives can be empty
we can use the virStorageSourceIsEmpty() helper.
If the storage device type is parsed as network our parser still allows
it to omit the <source> element. The empty drive check would not trigger
on such device as it expects that every network storage source is valid.
Use VIR_STORAGE_NET_PROTOCOL_NONE as a marker that the storage source is
empty.
Only selected fields from the disk source were copied when cold updating
source in a CDROM drive. When such drive was backed by a network file
this resulted into corruption of the definition:
<disk type='network' device='cdrom'>
<driver name='qemu' type='raw' cache='none'/>
<source protocol='gluster' name='gluster-vol1(null)'>
<host name='localhost'/>
</source>
<target dev='vdc' bus='virtio'/>
<readonly/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
</disk>
Update the whole source instead of cherry-picking elements.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1166024
The command did not modify the disk type and thus didn't allow to change
media from a file image to a block backed image or vice versa. In
addition when operating on a network backed removable devices the
command would replace the while <source> subelement with an invalid one.
This patch adds the --block option that allows to specify that the new
image is block backed and assumes that without that option all images
are file backed. Since network backends were always mangled it should
not cause problems.
Since cmdDetachDisk() calls into vshPrepareDiskXML() with
type == VSH_PREPARE_DISK_XML_NONE && source == NULL this would result
into skipping all the checks and effectively turn the function into a
XML formatter.
This patch changes the code to use the formatter directly so that the
function can be refactored in a easier way.
By querying the qemu guest agent with the QMP command
"guest-network-get-interfaces" and converting the received JSON
output to structured objects.
Although "ifconfig" is deprecated, IP aliases created by "ifconfig"
are supported by this API. The legacy syntax of an IP alias is:
"<ifname>:<alias-name>". Since we want all aliases to be clubbed
under parent interface, simply stripping ":<alias-name>" suffices.
Note that IP aliases formed by "ip" aren't visible to "ifconfig",
and aliases created by "ip" do not have any specific name. But
we are lucky, as qemu guest agent detects aliases created by both.
src/qemu/qemu_agent.h:
* Define qemuAgentGetInterfaces
src/qemu/qemu_agent.c:
* Implement qemuAgentGetInterface
src/qemu/qemu_driver.c:
* New function qemuGetDHCPInterfaces
* New function qemuDomainInterfaceAddresses
src/remote_protocol-sructs:
* Define new structs
tests/qemuagenttest.c:
* Add new test: testQemuAgentGetInterfaces
Test cases for IP aliases, 0 or multiple ipv4/ipv6 address(es)
Signed-off-by: Nehal J Wani <nehaljw.kkd1@gmail.com>
daemon/remote.c
* Define remoteSerializeDomainInterface, remoteDispatchDomainInterfaceAddresses
src/remote/remote_driver.c
* Define remoteDomainInterfaceAddresses
src/remote/remote_protocol.x
* New RPC procedure: REMOTE_PROC_DOMAIN_INTERFACE_ADDRESSES
* Define structs remote_domain_ip_addr, remote_domain_interface,
remote_domain_interfaces_addresse_args, remote_domain_interface_addresses_ret
* Introduce upper bounds (to handle DoS attacks):
REMOTE_DOMAIN_INTERFACE_MAX = 2048
REMOTE_DOMAIN_IP_ADDR_MAX = 2048
Restrictions on the maximum number of aliases per interface were
removed after kernel v2.0, and theoretically, at present, there
are no upper limits on number of interfaces per virtual machine
and on the number of IP addresses per interface.
src/remote_protocol-structs
* New structs added
Signed-off-by: Nehal J Wani <nehaljw.kkd1@gmail.com>
Define helper function virDomainInterfaceFree, which allows
the upper layer application to free the domain interface object
conveniently.
The API is going to provide multiple methods by flags, e.g.
* Query guest agent
* Parse DHCP lease file
include/libvirt/libvirt-domain.h
* Define virDomainInterfaceAddresses, virDomainInterfaceFree
* Define structs virDomainInterface, virDomainIPAddress
src/driver-hypervisor.h:
* Define domainInterfaceAddresses
src/libvirt-domain.c:
* Implement virDomainInterfaceAddresses
* Implement virDomainInterfaceFree
src/libvirt_public.syms:
* Export the new symbols
Signed-off-by: Nehal J Wani <nehaljw.kkd1@gmail.com>
Failures of parallelsStorageOpen occured because we incorrectly treated
path to VM' configuration file as a directory. Now initialization of
parallels VM domains home directory is fixed.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
Otherwise exporting existing domain config and defining a new one like this:
virsh -c parallels:///system dumpxml instance01 > my.xml
virsh -c parallels:///system define my.xml
leads to an error because PCS default x64 mode turns to x32.
Thus, we need to set correct cpuMode in prlsdkDoApplyConfig() explicitly.
Signed-off-by: Mikhail Feoktistov <mfeoktistov@parallels.com>
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We're parsing memballoon status period as unsigned int, but when we're
trying to set it, both we and qemu use signed int. That means large
values will get wrapped around to negative one resulting in error.
Basically the same problem as commit e3a7b874 was dealing with when
updating live domain.
QEMU changed the accepted value to int64 in commit 1f9296b5, but even
values as INT_MAX don't make sense since the value passed means seconds.
Hence adding capability flag for this change isn't worth it.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140958
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In order not to leave old error messages set, this patch refactors the
code so the error is reported only when acted upon. The only such place
already rewrites any error, so cleaning up all the error reporting in
qemuMonitorSetMemoryStatsPeriod() is enough.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
All the devices we have format their address as its last sub-element, so
let's change memballoon to follow suit. Also adjust RNG to allow any
order of them so 'virsh edit' doesn't shout at us.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Wireshark supports pkg-config since 1.11.3. Right now we build
wireshark-dissectior tool as default trough rpm build only on
fedora >= 21 and there is new wireshark that supports pkg-config.
If someone wants to build libvirt with wireshark-dissector against old
wireshark, they should specify the location by hand.
This patch is mainly to fix wrong dependency on wireshark binary as it
doesn't make sense to require that binary file to just get version info
of that package in makefile.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commit 4ab8cd77 added a check requiring input devices to have
a bus type of VIR_DOMAIN_INPUT_BUS_USB, failing to start the
domain otherwise. But virDomainDefParseXML adds implicit mouse
and keyboard if a graphics device is configured. See calls to
virDomainDefMaybeAddInput.
The regression is fixed by removing the check requiring USB input
devices, and skipping non-USB input devices when populating USB
'usbdevice' in libxl_domain_build_info struct.
Patch 51f9f03a4c introduces a regression
where if a blockCommit operation fails the disk is still marked as being
part of a block job but can't be unmarked later.
Commit 4f25146 (v1.2.8) managed to silence Coverity, but at the
cost of a memory leak detected by valgrind:
==24129== 40 bytes in 5 blocks are definitely lost in loss record 355 of 637
==24129== at 0x4A08B1C: realloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==24129== by 0x5084B8E: virReallocN (viralloc.c:245)
==24129== by 0x514D5AA: virDomainObjListExport (domain_conf.c:22200)
==24129== by 0x201227DB: qemuConnectListAllDomains (qemu_driver.c:18042)
==24129== by 0x51CC1B6: virConnectListAllDomains (libvirt-domain.c:6797)
==24129== by 0x14173D: remoteDispatchConnectListAllDomains (remote.c:1580)
==24129== by 0x121BE1: remoteDispatchConnectListAllDomainsHelper (remote_dispatch.h:1072)
In short, every time a client calls a ListAll variant and asks
for the resulting list, but there are 0 elements to return, we
end up leaking the 1-entry array that holds the NULL terminator.
What's worse, a read-only client can access these functions in a
tight loop to cause libvirtd to eventually run out of memory; and
this can be considered a denial of service attack against more
privileged clients. Thankfully, the leak is so small (8 bytes per
call) that you would already have some other denial of service with
any guest calling the API that frequently, so an out-of-memory
crash is unlikely enough that this did not warrant a CVE.
* daemon/remote.c (remoteDispatchConnectListAllDomains)
(remoteDispatchDomainListAllSnapshots)
(remoteDispatchDomainSnapshotListAllChildren)
(remoteDispatchConnectListAllStoragePools)
(remoteDispatchStoragePoolListAllVolumes)
(remoteDispatchConnectListAllNetworks)
(remoteDispatchConnectListAllInterfaces)
(remoteDispatchConnectListAllNodeDevices)
(remoteDispatchConnectListAllNWFilters)
(remoteDispatchConnectListAllSecrets)
(remoteDispatchNetworkGetDHCPLeases): Plug leak.
Signed-off-by: Eric Blake <eblake@redhat.com>
As pointed out by jtomko in his review of the IOThreads pinning code:
http://www.redhat.com/archives/libvir-list/2015-March/msg00495.html
there are some comments sprinkled in indicating IOThreads were using
the same structure as the VcpuPin code...
This is the first patch of a few that will change the virDomainVcpuPin*
structures and code to just virDomainPin* - starting with the data
structure naming...
During his review of the iothreads pin setting code, Pavel noted that
there was a potential memory leak with respect to how the newVcpuPin
is handled and the goto endjob's in failure paths which would not free
the memory. For reference, See:
http://www.redhat.com/archives/libvir-list/2015-March/msg00415.html
Now that the size of guest's memory can be inferred from the NUMA
configuration (if present) make it optional to specify <memory>
explicitly.
To make sure that memory is specified add a check that some form of
memory size was specified. One side effect of this change is that it is
no longer possible to specify 0KiB as memory size for the VM, but I
don't think it would be any useful to do so. (I can imagine embedded
systems without memory, just registers, but that's far from what libvirt
is usually doing).
Forbidding 0 memory for guests also fixes a few corner cases where 0 was
not interpreted correctly and caused failures. (Arguments for numad when
using automatic placement, size of the balloon). This fixes problems
described in https://bugzilla.redhat.com/show_bug.cgi?id=1161461
Test case changes are added to verify that the schema change and code
behave correctly.
Use the NUMA total instead of the configured size both in XML and for
uses in the code once NUMA is enabled for a domain.
One test case change is necessary as the rounding of the individual cell
sizes was not matching the rounding of the total size.
The memory sizes in qemu are aligned up to 1 MiB boundaries. There are
two places where this was done once for the total size and then for
individual NUMA cell sizes.
Add a function that will align the sizes in one place so that it's clear
where the sizes are aligned.
As there are two possible approaches to define a domain's memory size -
one used with legacy, non-NUMA VMs configured in the <memory> element
and per-node based approach on NUMA machines - the user needs to make
sure that both are specified correctly in the NUMA case.
To avoid this burden on the user I'd like to replace the NUMA case with
automatic totaling of the memory size. To achieve this I need to replace
direct access to the virDomainMemtune's 'max_balloon' field with
two separate getters depending on the desired size.
The two sizes are needed as:
1) Startup memory size doesn't include memory modules in some
hypervisors.
2) After startup these count as the usable memory size.
Note that the comments for the functions are future aware and document
state that will be present after a few later patches.
