Commit Graph

32611 Commits

Author SHA1 Message Date
Eric Blake
9884b2d185 snapshot: Avoid infloop during REDEFINE
Commit 55c2ab3e accidentally introduced an infinite loop while
checking whether a redefined snapshot would cause an infinite loop in
chasing its parents back to a root.  Alas, 'make check' did not catch
it, so my next patch will be a testsuite improvement that would have
hung and prevented the bug from being checked in to begin with.

Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
2019-03-25 08:50:45 -05:00
Daniel Henrique Barboza
f1d6585300 domain_conf: check device address before attach
In a case where we want to hotplug the following disk:

<disk type='file' device='disk'>
    (...)
    <address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>

In a QEMU guest that has a single OS disk, as follows:

<disk type='file' device='disk'>
    (...)
    <address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>

What happens is that the existing guest disk will receive the ID
'scsi0-0-0-0' due to how Libvirt calculate the alias based on
the address in qemu_alias.c, qemuAssignDeviceDiskAlias. When hotplugging
a disk that happens to have the same address, Libvirt will calculate
the same ID to it and attempt to device_add. QEMU will refuse it:

$ virsh attach-device ub1810 hp-disk-dup.xml
error: Failed to attach device from hp-disk-dup.xml
error: internal error: unable to execute QEMU command 'device_add': Duplicate ID 'scsi0-0-0-0' for device

And Libvirt follows it up with a cleanup code in qemuDomainAttachDiskGeneric
that ends up removing what supposedly is a faulty hotplugged disk but, in
this case, ends up being the original guest disk.

This patch adds an address verification for all attached devices, avoid
calling the driver attach() function using a device with duplicated address.
The change is done in virDomainDefCompatibleDevice when @action is equal
to VIR_DOMAIN_DEVICE_ACTION_ATTACH. The affected callers are:

- qemuDomainAttachDeviceLiveAndConfig, both LIVE and CONFIG cases;
- lxcDomainAttachDeviceFlags, both LIVE and CONFIG.

The check is done using the virDomainDefHasDeviceAddress, a generic
function that can check address duplicates for all supported device
types, not limiting just to DeviceDisk type.

After this patch, this is the result of the previous attach-device call:

$ ./run tools/virsh attach-device ub1810 hp-disk-dup.xml
error: Failed to attach device from hp-disk-dup.xml
error: Requested operation is not valid: Domain already contains a device with the same address

Reported-by: Srikanth Aithal <bssrikanth@in.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2019-03-25 10:23:59 +01:00
Cole Robinson
530c1671e1 tests: qemuxml2argv: add DO_TEST_INTERNAL
Base macro to unify the actual testCompareXMLToArgv test calls

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-22 11:51:47 -04:00
Cole Robinson
6fa656384e tests: qemuxml2argv: report error on ARG_* collisions
* ARG_CAPS_ARCH must be specified with ARG_CAPS_VER
* ARG_QEMU_CAPS shouldn't be specified with ARG_CAPS_*

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-22 11:51:47 -04:00
Cole Robinson
bb66ff2677 tests: qemuxml2argv: move DO_CAPS_TEST* qemuCaps init
Move DO_CAPS_TEST* qemuCaps init and all the associated setup
into testInfoSetArgs, adding ARG_CAPS_ARCH and ARG_CAPS_VER
options and using those to build the capsfile path locally

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-22 11:51:47 -04:00
Cole Robinson
710990ec41 tests: qemuxml2argv: Tweak TEST_CAPS_PATH
Make it an actual path and not a string prefix

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-22 11:51:47 -04:00
Cole Robinson
8d09acf66d spec: Remove libvirt < 0.9.4 upgrade compat
These blocks are only triggered when updating from a libvirt version
less than 0.9.4, which was released in August 2011. I think it's been
long enough that we can say this upgrade path is unsupported without
an intermediate step.

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-22 11:32:46 -04:00
Cole Robinson
769eab7d78 spec: Only call ldconfig on RHEL7
Since Fedora 28 (our minimum supported build), ldconfig is called
automatically for us:

https://fedoraproject.org/wiki/Changes/Removing_ldconfig_scriptlets

These changes appear to be implemented for RHEL > 7 as well, so only
run ldconfig on RHEL7

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-22 11:32:45 -04:00
Andrea Bolognani
9d3aa7c6e9 tests: Add s390x-ccw-graphics test case
We have tests for simple guests with graphics for basically
all other architectures, so it makes sense to include s390x
too.

The input file was generated by running

  $ virt-install \
    --name guest --os-variant fedora29 \
    --vcpus 4 --memory 4096 --disk size=5 \
    --graphics vnc \
    --print-xml

followed by minor tweaks, using a version of virt-manager
that includes commit 7b9de27a990f.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
2019-03-22 16:30:59 +01:00
Andrea Bolognani
9f33f4772b tests: Update aarch64-virt-graphics for virtio-blk
As of commit db6c7070e25a, virt-manager will default to using
virtio-blk rather than virtio-scsi for aarch64/virt guests,
bringing them in line with other architectures. Update our test
case to reflect this change.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
2019-03-22 16:30:59 +01:00
Michal Privoznik
5e752513d8 virDomainMomentAssignDef: Don't dereference a NULL pointer
This functions tries to add a domain moment (love the name!) onto
a list of domain moments. Firstly, it checks if another moment
with the same name already exists. Then, it creates an empty
moment (without initializing its definition) and tries to add the
moment onto the list dereferencing moment definition in that
process. If it succeeds (which it never can), only after that it
sets moment->def.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-22 11:19:41 +01:00
Nikolay Shirokovskiy
1193d9737b xml: nodedev: make pci capability class element optional
Commit 3bd4ed46 introduced this element as required which
breaks backcompat for test driver. Let's make the element optional.

Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
2019-03-22 12:59:56 +03:00
Nikolay Shirokovskiy
01e11ebcb6 nwfilter: fix adding std MAC and IP values to filter binding
Commit d1a7c08eb changed filter instantiation code to ignore MAC and IP
variables explicitly specified for filter binding. It just replaces
explicit values with values associated with the binding. Before the
commit virNWFilterCreateVarsFrom was used so that explicit value
take precedence. Let's bring old behavior back.

This is useful. For example if domain has two interfaces it makes
sense to list both mac adresses in MAC var of every interface
filterref. So that if guest make a bond of these interfaces
and start sending frames with one of the mac adresses from
both interfaces we can pass outgress traffic from both
interfaces too.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
2019-03-22 12:03:00 +03:00
Eric Blake
ac0379043a snapshot: Make virDomainSnapshotObjList use MomentObjList
Now that the generic moment code does pretty much everything that both
snapshots and checkpoints will need, it's time to replace the
now-duplicate code in virdomainsnapshotobjlist.c with simpler calls
into the generic code. I considered using sub-classing (a
'virDomainMomentObjList parent;' member, but that requires making the
opaque type visible in headers; so for now, I stuck with a container
instead (a 'virDomainMomentObjListPtr base;' member).

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-03-22 01:18:34 -05:00
Eric Blake
dc8d3dc6cd snapshot: Create new virDomainMomentObjList type
The new code here very heavily resembles the code in
virDomainSnapshotObjList. There are still a couple of spots that are
tied a little too heavily to snapshots (the free function lacks a
polymorphic cleanup until we refactor code to use virObject; and an
upcoming patch will add internal VIR_DOMAIN_MOMENT_LIST flags to
replace the snapshot flag bits), but in general this is fairly close
to the state needed to add checkpoint lists.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-03-22 01:18:34 -05:00
Eric Blake
5d23cd1c52 snapshot: Rename file for virDomainMomentObj
Now that we have made virDomainMomentObj sufficiently generic to
support both snapshots and checkpoints, it is time to rename the file
that it lives in. The split between a generic object and a list of the
generic objects doesn't buy us as much, so it will be easier to stick
all the moment list code in one file, with more code moving in the
next patch.  The changes during the move are fairly minor, although it
is worth pointing out that the log/error messages for the new file
report that they are from "domain", since the file will eventually be
shared by both "domain snapshot" and "domain checkpoint".

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-03-22 01:18:34 -05:00
Eric Blake
e055a816af snapshot: Rename virDomainSnapshotObjPtr
Now that the core of SnapshotObj is agnostic to snapshots and can be
shared with upcoming checkpoint code, it is time to rename the struct
and the functions specific to list operations. A later patch will
shuffle which file holds the common code. This is a fairly mechanical
patch.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-03-22 01:18:34 -05:00
Eric Blake
1ab05da228 snapshot: Switch type of virDomainSnapshotObj.def
Another step towards making the object list reusable for both
snapshots and checkpoints: the list code only ever needs items that
are in the common virDomainMomentDef base type. This undoes a lot of
the churn in accessing common members added in the previous patch, and
the bulk of the patch is mechanical. But there was one spot where I
had to unroll a VIR_STEAL_PTR to work around changed types.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-03-22 01:18:34 -05:00
Eric Blake
ffc0fbebe2 snapshot: Factor out virDomainMomentDef class
Pull out the common parts of virDomainSnapshotDef that will be reused
for virDomainCheckpointDef into a new base class.  Adjust all callers
that use the direct fields (some of it is churn that disappears when
the next patch refactors virDomainSnapshotObj; oh well...).

Someday, I hope to switch this type to be a subclass of virObject, but
that requires a more thorough audit of cleanup paths, and besides
minimal incremental changes are easier to review.

As for the choice of naming:
I promised my teenage daughter Evelyn that I'd give her credit for her
contribution to this commit. I asked her "What would be a good name
for a base class for DomainSnapshot and DomainCheckpoint". After
explaining what a base class was (using the classic OOB Square and
Circle inherit from Shape), she came up with "DomainMoment", which is
way better than my initial thought of "DomainPointInTime" or
"DomainPIT".

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-03-22 01:18:34 -05:00
Eric Blake
de80cdbcc9 snapshot: Refactor list filtering
Separate the algorithm for which list members to vist (which is
generic and can be shared with checkpoints, provided that common
filtering bits are either declared with the same value or have a
mapping from public API to common value) from the decision on which
members to return (which is specific to snapshots).  The typedef for
the callback function feels a bit heavy here, but will make it easier
to move the common portions in a later patch.

As part of the refactoring, note that the macros for selecting filter
bits are specific to listing functionality, so they belong better in
virdomainsnapshotobjlist.h (missed in commit 9b75154c).

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-03-22 01:18:33 -05:00
Eric Blake
55c2ab3e2b snapshot: Access snapshot def directly when needed
An upcoming patch will rework virDomainSnapshotObjList to be generic
for both snapshots and checkpoints; reduce the churn by adding a new
accessor virDomainSnapshotObjGetDef() which returns the
snapshot-specific definition even when the list is rewritten to
operate only on a base class, then using it at sites that that are
specific to snapshots.  Use VIR_STEAL_PTR when appropriate in the
affected lines.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-03-22 01:18:33 -05:00
Eric Blake
02c4e24db7 snapshot: Add accessors for updating snapshot list relations
Rather than allowing a leaky abstraction where multiple drivers have
to open-code operations that update the relations in a
virDomainSnapshotObjList, it is better to add accessor functions so
that updates to relations are maintained closer to the internals.
This patch finishes the job started in the previous patch, by getting
rid of all direct access to nchildren, first_child, or sibling outside
of the lowest level functions, making it easier to refactor later on.

The lone new caller to virDomainSnapshotObjListSize() checks for a
return != 0, because it wants to handles errors (-1, only possible if
the hash table wasn't allocated) and existing snapshots (> 0) in the
same manner; we can drop the check for a current snapshot on the
grounds that there shouldn't be one if there are no snapshots.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-03-22 01:18:33 -05:00
Eric Blake
ced0898f86 snapshot: Add accessor for reparenting snapshot children
Rather than allowing a leaky abstraction where multiple drivers have
to open-code operations that update the relations in a
virDomainSnapshotObjList, it is better to add accessor functions so
that updates to relations are maintained closer to the internals.
This patch starts the task with a single new function:
virDomainSnapshotMoveChildren(). The logic might not be immediately
obvious [okay, that's an understatement - the existing code uses black
magic ;-)], so here's an overview: The old code has an implicit for
loop around each call to qemuDomainSnapshotReparentChildren() by using
virDomainSnapshotForEachChild() (you'll need a wider context than
git's default of 3 lines to see that); the new code has a more visible
for loop. Then it helps if you realize that the code is making two
separate changes to each child object: STRDUP of the new parent name
prior to writing XML files (unchanged), and touching up the pointer to
the parent object (refactored); the end result is the same whether a
single pass made both changes (both in driver code), or whether it is
split into two passes making one change each (one in driver code, the
other in the new accessor).

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-03-22 01:18:25 -05:00
Eric Blake
4819f54bd3 snapshot: Track current snapshot in virDomainSnapshotObjList
It is easier to track the current snapshot as part of the list of
snapshots. In particular, doing so lets us guarantee that the current
snapshot is cleared if that snapshot is removed from the list (rather
than depending on the caller to do so, and risking a use-after-free
problem, such as the one recently patched in 1db9d0efbf).  This
requires the addition of several new accessor functions, as well as a
useful return type for virDomainSnapshotObjListRemove().  A few error
handling sites that were previously setting vm->current_snapshot =
NULL can now be dropped, because the previous function call has now
done it already.  Also, qemuDomainRevertToSnapshot() was setting the
current vm twice, so keep only the one used on the success path.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-03-22 01:15:20 -05:00
Eric Blake
40bc98ddaf snapshot: Rework parse logic during libvirt startup
Rework the logic in qemuDomainSnapshotLoad() to set
vm->current_snapshot only once at the end of the loop, rather than
repeatedly querying it during the loop, to make it easier for the next
patch to use accessor functions rather than direct manipulation of
vm->current_snapshot.  When encountering multiple snapshots claiming
to be current (based on the presence of an <active>1</active> element
in the XML, which libvirt only outputs for internal use and not for
any public API), this changes behavior from warning only once and
running with no current snapshot, to instead warning on each duplicate
and selecting the last one encountered (which is arbitrary based on
readdir() ordering, but actually stands a fair chance of being the
most-recently created snapshot whether by timestamp or by the
propensity of humans to name things in ascending order).

Note that the code in question is only run by libvirtd when it first
starts, reading state from disk from the previous run into memory for
this run. Since the data resides somewhere that only libvirt should be
touching (typically /var/lib/libvirt/qemu/snapshot/*), it should be
clean.  So in the common case, the code touched here is unreachable.
But if someone is actually messing with files behind libvirt's back,
they deserve the change in behavior.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-03-22 01:15:20 -05:00
Eric Blake
f105627992 snapshot: Drop virDomainSnapshotDef.current
The only use for the 'current' member of virDomainSnapshotDef was with
the PARSE/FORMAT_INTERNAL flag for controlling an internal-use
<active> element marking whether a particular snapshot definition was
current, and even then, only by the qemu driver on output, and by qemu
and test driver on input. But this duplicates vm->snapshot_current,
and gets in the way of potential simplifications to have qemu store a
single file for all snapshots rather than one file per snapshot.  Get
rid of the member by adding a bool* parameter during parse (ignored if
the PARSE_INTERNAL flag is not set), and by adding a new flag during
format (if FORMAT_INTERNAL is set, the value printed in <active>
depends on the new FORMAT_CURRENT).

Then update the qemu driver accordingly, which involves hoisting
assignments to vm->current_snapshot to occur prior to any point where
a snapshot XML file is written (although qemu kept
vm->current_snapshot and snapshot->def_current in sync by the end of
the function, they were not always identical in the middle of
functions, so the shuffling gets a bit interesting). Later patches
will clean up some of that confusing churn to vm->current_snapshot.

Note: even if later patches refactor qemu to no longer use
FORMAT_INTERNAL for output (by storing bulk snapshot XML instead), we
will always need PARSE_INTERNAL for input (because on upgrade, a new
libvirt still has to parse XML left from a previous libvirt).

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-03-22 01:15:20 -05:00
Eric Blake
0baf6945ed snapshot: Minor cleanup to virDomainSnapshotAssignDef
When a future patch converts virDomainSnapshotDef to be a virObject,
we need to be careful that converting VIR_FREE() to virObjectUnref()
does not result in double frees. Reorder the assignment of def into
the object to the point after object is in the hash table (as
otherwise the virHashAddEntry() error path would have a shot at
freeing def prematurely).

Suggested-by: John Ferlan <ferlan@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2019-03-22 01:15:20 -05:00
Eric Blake
967eef2b95 snapshot: Tweaks to bulk dumpxml/import internals
Change the return value of virDomainSnapshotObjListParse() to return
the number of snapshots imported, and allow a return of 0 (the
original proposal of adding a flag to virDomainSnapshotCreateXML
required returning an arbitrary non-NULL snapshot, but that idea was
abandoned; and by returning a count, we are no longer constrained to a
non-empty list).

Document which flags are supported (namely, just SECURE) in
virDomainSnapshotObjListFormat().

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-03-22 01:15:20 -05:00
Eric Blake
063042c7d0 vbox: Clean up some snapshot usage
An upcoming patch will be reworking virDomainSnapshotDef to have a
base class; minimize the churn by using a local variable to reduce the
number of dereferences required when acessing the domain definition
associated with the snapshot.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-03-22 01:15:20 -05:00
Cole Robinson
320a1480d0 tests: qemuxml2argv: move DO_TEST qemuCaps init
Move DO_TEST* qemuCaps init into testInfoSetArgs. This is a step
towards unifying the different test macro implementations

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-21 12:43:02 -04:00
Cole Robinson
f32d4e3e71 tests: qemuxml2argv: add testInfoClear
This is closer to the pattern of qemuxml2xml tests, and will make
things easier if we extend testInfo to contain more freeable data

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-21 12:43:02 -04:00
Cole Robinson
5eaaa10679 tests: qemuxml2argv: build capsfile in DO_TEST_CAPS_INTERNAL
Rather than make callers do it. The operative info is just arch
and ver which we are passing in already.

Fold in stripmachinealiases too since it is just dependent on
ver value

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-21 12:43:02 -04:00
Cole Robinson
e911de2a30 tests: qemuxml2argv: centralize CAPS suffix building
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-21 12:43:02 -04:00
Cole Robinson
504492a63d tests: qemuxml2argv: remove full testInfo initialization
Only initialize the fields that are passed in

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-21 12:43:02 -04:00
Cole Robinson
c824ce1ba0 tests: qemuxml2argv: use varargs for CAPS flags
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-21 12:43:02 -04:00
Cole Robinson
24bba8797f tests: qemuxml2argv: remove unused CAPS migrateFrom
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-21 12:43:02 -04:00
Cole Robinson
a8bf6194fa tests: qemuxml2argv: add a comment separating DO_TEST* macros
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-21 12:43:02 -04:00
Cole Robinson
0ea2bd054f tests: qemuxml2argv: remove unused DO_TEST_CAPS* macros
They are potentially useful at the moment, but we will be making
things much more flexible

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-21 12:43:02 -04:00
Cole Robinson
d68c9068c9 tests: qemuxml2argv: remove DO_TEST_PARSE_FLAGS_ERROR
It only has one caller. Just use DO_TEST_FULL

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-21 12:43:01 -04:00
Cole Robinson
8bffb1fcd5 tests: qemuxml2argv: handle parseFlags with varargs
This allows us to drop parseFlags from DO_TEST_FULL

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-21 12:43:01 -04:00
Cole Robinson
4cbf6830c1 tests: qemuxml2argv: handle flags with varargs
This allows us to drop flags from DO_TEST_FULL

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-21 12:43:01 -04:00
Cole Robinson
0ecf885be1 tests: qemuxml2argv: handle migrate* with varargs
This allows us to drop migrateFrom and migrateFd from DO_TEST_FULL

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-21 12:43:01 -04:00
Cole Robinson
5a1e05b427 tests: qemuxml2argv: handle GIC with varargs
This allows us to drop stub GIC values from DO_TEST_FULL calls

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-21 12:43:01 -04:00
Cole Robinson
646eb207eb tests: qemuxml2argv: break apart testInitQEMUCaps
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-21 12:43:01 -04:00
Cole Robinson
c1202cbc92 tests: qemuxml2argv: push ARG_QEMU_CAPS to callers
This is necessary before we can start adding more optional parameter
implementations to DO_TEST_FULL

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-21 12:43:01 -04:00
Cole Robinson
fdf6c89ee7 tests: qemuxml2argv: add va_arg enum handling
This establishes a pattern that will allow us to make test macros
more general purpose, by taking optional arguments. The general
format will be:

DO_TEST_FULL(...
             ARG_FOO, <value1>,
             ARG_BAR, <value2>)

ARG_X are just enum values that we look for in the va_args and know
how to interpret.

Implement this for the existing implicit qemuCaps va_args

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-21 12:43:01 -04:00
Cole Robinson
6433783be3 tests: qemuxml2argv: add testInfoSetArgs
For now it just fills in the qemuCaps list. We will expand it
in future patches

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-21 12:43:01 -04:00
Cole Robinson
05be8d8b06 qemu: add virQEMUCapsSetVAList
And adjust virQEMUCapsSetList to use it. It will also be used in future
patches.

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-21 12:43:01 -04:00
Eric Blake
1db9d0efbf test: Avoid use-after-free on virDomainSnapshotDelete
The following virsh command was triggering a use-after-free:

$ virsh -c test:///default '
  snapshot-create-as test s1
  snapshot-create-as test s2
  snapshot-delete --children-only test s1
  snapshot-current --name test'
Domain snapshot s1 created
Domain snapshot s2 created
Domain snapshot s1 children deleted

error: name in virGetDomainSnapshot must not be NULL

I got lucky on that run - although the error message is quite
unexpected.  On other runs, I was able to get a core dump, and
valgrind confirms there is a definitive problem.

The culprit? We were inconsistent about whether we set
vm->current_snapshot, snap->def->current, or both when updating how
the current snapshot was being tracked.  As a result, deletion did not
see that snapshot s2 was previously current, and failed to update
vm->current_snapshot, so that the next API using the current snapshot
failed because it referenced stale memory for the now-gone s2 (instead
of the intended s1).

The test driver code was copied from the qemu code (which DOES track
both pieces of state everywhere), but was purposefully simplified
because the test driver does not have to write persistent snapshot
state to the file system.  But when you realize that the only reason
snap->def->current needs to exist is when writing out one file per
snapshot for qemu, it's just as easy to state that the test driver
never has to mess with the field (rather than chasing down which
places forgot to set the field), and have vm->current_snapshot be the
sole source of truth in the test driver.

Ideally, I'd get rid of the 'current' member in virDomainSnapshotDef,
as well as the 'current_snapshot' member in virDomainDef, and instead
track the current member in virDomainSnapshotObjList, coupled with
writing ALL snapshot state for qemu in a single file (where I can use
<snapshots current='...'> as a wrapper, rather than
VIR_DOMAIN_SNAPSHOT_FORMAT_INTERNAL to output <current>1</current> XML
on a per-snapshot file basis).  But that's a bigger change, so for now
I'm just patching things to avoid the test driver segfault.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-03-20 12:24:25 -05:00
Daniel P. Berrangé
fc65c22b73 rpm: fix upgrades when RBD is disabled in a new version
We previously had to disable RBD on 32-bit platforms since Ceph has
dropped all support for 32-bit. Unfortunately anyone with the RPM
libvirt-daemon-driver-storage-rbd installed on 32-bit now has a
broken upgrade path.

To fix this we must make libvirt-daemon-driver-storage-core
have an Obsoletes: libvirt-daemon-driver-storage-rbd < $VER-$REL

Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-20 17:05:23 +00:00