CVE-2013-6458
Generally, every API that is going to begin a job should do that before
fetching data from vm->def. However, qemuDomainGetBlockInfo does not
know whether it will have to start a job or not before checking vm->def.
To avoid using disk alias that might have been freed while we were
waiting for a job, we use its copy. In case the disk was removed in the
meantime, we will fail with "cannot find statistics for device '...'"
error message.
(cherry picked from commit b799259583)
CVE-2013-6458
https://bugzilla.redhat.com/show_bug.cgi?id=1043069
When virDomainDetachDeviceFlags is called concurrently to
virDomainBlockStats: libvirtd may crash because qemuDomainBlockStats
finds a disk in vm->def before getting a job on a domain and uses the
disk pointer after getting the job. However, the domain in unlocked
while waiting on a job condition and thus data behind the disk pointer
may disappear. This happens when thread 1 runs
virDomainDetachDeviceFlags and enters monitor to actually remove the
disk. Then another thread starts running virDomainBlockStats, finds the
disk in vm->def, and while it's waiting on the job condition (owned by
the first thread), the first thread finishes the disk removal. When the
second thread gets the job, the memory pointed to be the disk pointer is
already gone.
That said, every API that is going to begin a job should do that before
fetching data from vm->def.
(cherry picked from commit db86da5ca2)
If there's a migration cancelled, the bitmap of migration port should be
cleaned up too.
Signed-off-by: Zeng Junliang <zengjunliang@huawei.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
(cherry picked from commit c92ca769af)
Commit e3ef20d7 allows user to configure migration ports range via
qemu.conf. However, it forgot to update augeas definition file and
even the test data was malicious.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
(cherry picked from commit d9be5a7157)
Conflicts:
src/qemu/libvirtd_qemu.aug
src/qemu/test_libvirtd_qemu.aug.in
https://bugzilla.redhat.com/show_bug.cgi?id=1019053
When we migrate vms concurrently, there's a chance that libvirtd on
destination assigns the same port for different migrations, which will
lead to migration failure during prepare phase on destination. So we use
virPortAllocator here to solve the problem.
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
(cherry picked from commit 0196845d3a)
Conflicts:
missing support for changing the migration listen address
src/qemu/qemu_migration.c
by, in libxlDomainGetNumaParameters(), calling libxl_bitmap_init() as soon as
possible, which avoids getting to 'cleanup:', where libxl_bitmap_dispose()
happens, without having initialized the nodemap, and hence crashing after some
invalid free()-s:
# ./daemon/libvirtd -v
*** Error in `/home/xen/libvirt.git/daemon/.libs/lt-libvirtd': munmap_chunk(): invalid pointer: 0x00007fdd42592666 ***
======= Backtrace: =========
/lib64/libc.so.6(+0x7bbe7)[0x7fdd3f767be7]
/lib64/libxenlight.so.4.3(libxl_bitmap_dispose+0xd)[0x7fdd2c88c045]
/home/xen/libvirt.git/daemon/.libs/../../src/.libs/libvirt_driver_libxl.so(+0x12d26)[0x7fdd2caccd26]
/home/xen/libvirt.git/src/.libs/libvirt.so.0(virDomainGetNumaParameters+0x15c)[0x7fdd4247898c]
/home/xen/libvirt.git/daemon/.libs/lt-libvirtd(+0x1d9a2)[0x7fdd42ecc9a2]
/home/xen/libvirt.git/src/.libs/libvirt.so.0(virNetServerProgramDispatch+0x3da)[0x7fdd424e9eaa]
/home/xen/libvirt.git/src/.libs/libvirt.so.0(+0x1a6f38)[0x7fdd424e3f38]
/home/xen/libvirt.git/src/.libs/libvirt.so.0(+0xa81e5)[0x7fdd423e51e5]
/home/xen/libvirt.git/src/.libs/libvirt.so.0(+0xa783e)[0x7fdd423e483e]
/lib64/libpthread.so.0(+0x7c53)[0x7fdd3febbc53]
/lib64/libc.so.6(clone+0x6d)[0x7fdd3f7e1dbd]
Signed-off-by: Dario Faggili <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
(cherry picked from commit f9ee91d355)
The function doesn't check whether the request is made for active or
inactive domain. Thus when the domain is not running it still tries
accessing non-existing cgroups (priv->cgroup, which is NULL).
I re-made the function in order for it to work the same way it's qemu
counterpart does.
Reproducer:
1) Define an LXC domain
2) Do 'virsh memtune <domain> --hard-limit 133T'
Backtrace:
Thread 6 (Thread 0x7fffec8c0700 (LWP 26826)):
#0 0x00007ffff70edcc4 in virCgroupPathOfController (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", path=0x7fffec8bf718) at util/vircgroup.c:1764
#1 0x00007ffff70e9206 in virCgroupSetValueStr (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", value=0x7fffe409f360 "1073741824")
at util/vircgroup.c:669
#2 0x00007ffff70e98b4 in virCgroupSetValueU64 (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", value=1073741824) at util/vircgroup.c:740
#3 0x00007ffff70ee518 in virCgroupSetMemory (group=0x0, kb=1048576) at util/vircgroup.c:1904
#4 0x00007ffff70ee675 in virCgroupSetMemoryHardLimit (group=0x0, kb=1048576)
at util/vircgroup.c:1944
#5 0x00005555557d54c8 in lxcDomainSetMemoryParameters (dom=0x7fffe40cc420,
params=0x7fffe409f100, nparams=1, flags=0) at lxc/lxc_driver.c:774
#6 0x00007ffff72c20f9 in virDomainSetMemoryParameters (domain=0x7fffe40cc420,
params=0x7fffe409f100, nparams=1, flags=0) at libvirt.c:4051
#7 0x000055555561365f in remoteDispatchDomainSetMemoryParameters (server=0x555555eb7e00,
client=0x555555ec4b10, msg=0x555555eb94e0, rerr=0x7fffec8bfb70, args=0x7fffe40b8510)
at remote_dispatch.h:7621
#8 0x00005555556133fd in remoteDispatchDomainSetMemoryParametersHelper (server=0x555555eb7e00,
client=0x555555ec4b10, msg=0x555555eb94e0, rerr=0x7fffec8bfb70, args=0x7fffe40b8510,
ret=0x7fffe40b84f0) at remote_dispatch.h:7591
#9 0x00007ffff73b293f in virNetServerProgramDispatchCall (prog=0x555555ec3ae0,
server=0x555555eb7e00, client=0x555555ec4b10, msg=0x555555eb94e0)
at rpc/virnetserverprogram.c:435
#10 0x00007ffff73b207f in virNetServerProgramDispatch (prog=0x555555ec3ae0,
server=0x555555eb7e00, client=0x555555ec4b10, msg=0x555555eb94e0)
at rpc/virnetserverprogram.c:305
#11 0x00007ffff73a4d2c in virNetServerProcessMsg (srv=0x555555eb7e00, client=0x555555ec4b10,
prog=0x555555ec3ae0, msg=0x555555eb94e0) at rpc/virnetserver.c:165
#12 0x00007ffff73a4e8d in virNetServerHandleJob (jobOpaque=0x555555ec3e30, opaque=0x555555eb7e00)
at rpc/virnetserver.c:186
#13 0x00007ffff7187f3f in virThreadPoolWorker (opaque=0x555555eb7ac0) at util/virthreadpool.c:144
#14 0x00007ffff718733a in virThreadHelper (data=0x555555eb7890) at util/virthreadpthread.c:161
#15 0x00007ffff468ed89 in start_thread (arg=0x7fffec8c0700) at pthread_create.c:308
#16 0x00007ffff3da26bd in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:113
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
(cherry picked from commit 9faf3f2950)
The function doesn't check whether the request is made for active or
inactive domain. Thus when the domain is not running it still tries
accessing non-existing cgroups (priv->cgroup, which is NULL).
I re-made the function in order for it to work the same way it's qemu
counterpart does.
Reproducer:
1) Define an LXC domain
2) Do 'virsh memtune <domain>'
Backtrace:
Thread 6 (Thread 0x7fffec8c0700 (LWP 13387)):
#0 0x00007ffff70edcc4 in virCgroupPathOfController (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", path=0x7fffec8bf750) at util/vircgroup.c:1764
#1 0x00007ffff70e958c in virCgroupGetValueStr (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", value=0x7fffec8bf7c0) at util/vircgroup.c:705
#2 0x00007ffff70e9d29 in virCgroupGetValueU64 (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", value=0x7fffec8bf810) at util/vircgroup.c:804
#3 0x00007ffff70ee706 in virCgroupGetMemoryHardLimit (group=0x0, kb=0x7fffec8bf8a8)
at util/vircgroup.c:1962
#4 0x00005555557d590f in lxcDomainGetMemoryParameters (dom=0x7fffd40024a0,
params=0x7fffd40027a0, nparams=0x7fffec8bfa24, flags=0) at lxc/lxc_driver.c:826
#5 0x00007ffff72c28d3 in virDomainGetMemoryParameters (domain=0x7fffd40024a0,
params=0x7fffd40027a0, nparams=0x7fffec8bfa24, flags=0) at libvirt.c:4137
#6 0x000055555563714d in remoteDispatchDomainGetMemoryParameters (server=0x555555eb7e00,
client=0x555555ebaef0, msg=0x555555ebb3e0, rerr=0x7fffec8bfb70, args=0x7fffd40024e0,
ret=0x7fffd4002420) at remote.c:1895
#7 0x00005555556052c4 in remoteDispatchDomainGetMemoryParametersHelper (server=0x555555eb7e00,
client=0x555555ebaef0, msg=0x555555ebb3e0, rerr=0x7fffec8bfb70, args=0x7fffd40024e0,
ret=0x7fffd4002420) at remote_dispatch.h:4050
#8 0x00007ffff73b293f in virNetServerProgramDispatchCall (prog=0x555555ec3ae0,
server=0x555555eb7e00, client=0x555555ebaef0, msg=0x555555ebb3e0)
at rpc/virnetserverprogram.c:435
#9 0x00007ffff73b207f in virNetServerProgramDispatch (prog=0x555555ec3ae0,
server=0x555555eb7e00, client=0x555555ebaef0, msg=0x555555ebb3e0)
at rpc/virnetserverprogram.c:305
#10 0x00007ffff73a4d2c in virNetServerProcessMsg (srv=0x555555eb7e00, client=0x555555ebaef0,
prog=0x555555ec3ae0, msg=0x555555ebb3e0) at rpc/virnetserver.c:165
#11 0x00007ffff73a4e8d in virNetServerHandleJob (jobOpaque=0x555555ebc7e0, opaque=0x555555eb7e00)
at rpc/virnetserver.c:186
#12 0x00007ffff7187f3f in virThreadPoolWorker (opaque=0x555555eb7ac0) at util/virthreadpool.c:144
#13 0x00007ffff718733a in virThreadHelper (data=0x555555eb7890) at util/virthreadpthread.c:161
#14 0x00007ffff468ed89 in start_thread (arg=0x7fffec8c0700) at pthread_create.c:308
#15 0x00007ffff3da26bd in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:113
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
(cherry picked from commit f8c1cb9021)
The array of sasl_callback_t callbacks which is passed to sasl_client_new()
must be kept alive as long as the created sasl_conn_t object is alive as
cyrus-sasl uses this structure internally for things like logging, so
the memory used for callbacks must only be freed after sasl_dispose() has
been called.
During testing of successful SASL logins with
virsh -c qemu+tls:///system list --all
I've been getting invalid read reports from valgrind
==9237== Invalid read of size 8
==9237== at 0x6E93B6F: _sasl_getcallback (common.c:1745)
==9237== by 0x6E95430: _sasl_log (common.c:1850)
==9237== by 0x16593D87: digestmd5_client_mech_dispose (digestmd5.c:4580)
==9237== by 0x6E91653: client_dispose (client.c:332)
==9237== by 0x6E9476A: sasl_dispose (common.c:851)
==9237== by 0x4E225A1: virNetSASLSessionDispose (virnetsaslcontext.c:678)
==9237== by 0x4CBC551: virObjectUnref (virobject.c:262)
==9237== by 0x4E254D1: virNetSocketDispose (virnetsocket.c:1042)
==9237== by 0x4CBC551: virObjectUnref (virobject.c:262)
==9237== by 0x4E2701C: virNetSocketEventFree (virnetsocket.c:1794)
==9237== by 0x4C965D3: virEventPollCleanupHandles (vireventpoll.c:583)
==9237== by 0x4C96987: virEventPollRunOnce (vireventpoll.c:652)
==9237== by 0x4C94730: virEventRunDefaultImpl (virevent.c:274)
==9237== by 0x12C7BA: vshEventLoop (virsh.c:2407)
==9237== by 0x4CD3D04: virThreadHelper (virthreadpthread.c:161)
==9237== by 0x7DAEF32: start_thread (pthread_create.c:309)
==9237== by 0x8C86EAC: clone (clone.S:111)
==9237== Address 0xe2d61b0 is 0 bytes inside a block of size 168 free'd
==9237== at 0x4A07577: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==9237== by 0x4C73827: virFree (viralloc.c:580)
==9237== by 0x4DE4BC7: remoteAuthSASL (remote_driver.c:4219)
==9237== by 0x4DE33D0: remoteAuthenticate (remote_driver.c:3639)
==9237== by 0x4DDBFAA: doRemoteOpen (remote_driver.c:832)
==9237== by 0x4DDC8DC: remoteConnectOpen (remote_driver.c:1031)
==9237== by 0x4D8595F: do_open (libvirt.c:1239)
==9237== by 0x4D863F3: virConnectOpenAuth (libvirt.c:1481)
==9237== by 0x12762B: vshReconnect (virsh.c:337)
==9237== by 0x12C9B0: vshInit (virsh.c:2470)
==9237== by 0x12E9A5: main (virsh.c:3338)
This commit changes virNetSASLSessionNewClient() to take ownership of the SASL
callbacks. Then we can free them in virNetSASLSessionDispose() after the corresponding
sasl_conn_t has been freed.
(cherry picked from commit 13fdc6d63e)
The previous attempt (commit d65e0e1) removed just one of two
libvirt-guests restarts that happened on libvirt-client update. Let's
remove the last one too :-)
https://bugzilla.redhat.com/show_bug.cgi?id=962225
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
(cherry picked from commit 604f79b360)
This Python interface code is returning a -1 on errors for the
`baselineCPU' API. Since this API is supposed to return a pointer
the error return value should really be VIR_PY_NONE.
NB: I've checked all the other APIs in this file and this is the
only pointer API that is returning -1.
Signed-off-by: Don Dugger <donald.d.dugger@intel.com>
(crobinso: Upstream in libvirt-python.git)
We were unconditionally removing the device from the host list, when it
should only be done on error.
This fixes USB collision detection when hotplugging the same device to
two guests.
(cherry picked from commit 586b0ed818)
If we hit a collision, we free the USB device while it is still part
of our temporary USBDeviceList. When the list is unref'd, the device
is free'd again.
Make the initial device freeing dependent on whether it is present
in the temporary list or not.
(cherry picked from commit 5953a73787)
Similar to what Jiri did for cgroup setup/teardown in 05e149f94, push
it all into the device handler functions so we can do the necessary prep
work before claiming the device.
This also fixes hotplugging USB devices by product/vendor (virt-manager's
default behavior):
https://bugzilla.redhat.com/show_bug.cgi?id=1016511
(cherry picked from commit ee414b5d6d)
https://bugzilla.redhat.com/show_bug.cgi?id=1025108
So far qemuSetupHostdevCGroup was called very early during hotplug, even
before we knew the device we were about to hotplug was actually
available. By calling the function later, we make sure QEMU won't be
allowed to access devices used by other domains.
Another important effect of this change is that hopluging USB devices
specified by vendor and product (but not by their USB address) works
again. This was broken since v1.0.5-171-g7d763ac, when the call to
qemuFindHostdevUSBDevice was moved after the call to
qemuSetupHostdevCGroup, which then used an uninitialized USB address.
(cherry picked from commit 05e149f94c)
When doing an internal snapshot on a VM with sheepdog or RBD disks we
would not set a flag to mark the domain is using internal snapshots and
might end up creating a mixed snapshot. Move the setting of the variable
to avoid this problem.
(cherry picked from commit d8cf91ae38)
Restarting an active libvirt-guests.service is the equivalent of
doing:
/usr/libexec/libvirt-guests.sh stop
/usr/libexec/libvirt-guests.sh start
Which in a default configuration will managedsave every running VM,
and then restore them. Certainly not something we should do every
time the libvirt-client RPM is updated.
Just drop the try-restart attempt, I don't know what purpose it
serves anyways.
https://bugzilla.redhat.com/show_bug.cgi?id=962225
(cherry picked from commit d65e0e1466)
If the host side of an LXC container console disconnected
and the guest side continued to write data, until the PTY
buffer filled up, the LXC controller would busy wait. It
would repeatedly see POLLHUP from poll() and not disable
the watch.
This was due to some bogus logic detecting blocking
conditions. Upon seeing a POLLHUP we must disable all
reading & writing from the PTY, and setup the epoll to
wake us up again when the connection comes back.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 5087a5a009)
QEMU 1.6.0 introduced new migration status: setup
Libvirt does not expect such string in QMP and refuses to migrate with error
"unexpected migration status in setup"
This patch fixes it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
(cherry picked from commit d35ae4143d)
Rather than casting the virBitmap pointer to uint8_t* and then using
the structure contents as a byte array, use the virBitmap API to determine
the bitmap size and test each bit.
Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
(cherry picked from commit ba1bf10063)
This should resolve:
https://bugzilla.redhat.com/show_bug.cgi?id=1012085
libvirt previously recognized NFS, GFS2, OCFS2, and AFS filesystems as
"shared", and thus eligible for exceptions to certain rules/actions
about chowning image files before handing them off to a guest. This
patch widens the definition of "shared filesystem" to include SMB and
CIFS filesystems (aka "Windows file sharing"); both of these use the
same protocol, but different drivers so there are different magic
numbers for each.
(cherry picked from commit e4e73337e5)
When opening a new connection to the driver, nwfilterOpen
only succeeds if the driverState has been allocated.
Move the privilege check in driver initialization before
the state allocation to disable the driver.
This changes the nwfilter-define error from:
error: cannot create config directory (null): Bad address
To:
this function is not supported by the connection driver:
virNWFilterDefineXML
https://bugzilla.redhat.com/show_bug.cgi?id=1029266
(cherry picked from commit b7829f959b)
Since 86d90b3a (yes, my patch; again) we are supporting NBD storage
migration. However, on error recovery path we got the steps reversed.
The correct order is: return NBD port to the virPortAllocator and then
either unlock the vm or remove it from the driver. Not vice versa.
==11192== Invalid write of size 4
==11192== at 0x11488559: qemuMigrationPrepareAny (qemu_migration.c:2459)
==11192== by 0x11488EA6: qemuMigrationPrepareDirect (qemu_migration.c:2652)
==11192== by 0x114D1509: qemuDomainMigratePrepare3Params (qemu_driver.c:10332)
==11192== by 0x519075D: virDomainMigratePrepare3Params (libvirt.c:7290)
==11192== by 0x1502DA: remoteDispatchDomainMigratePrepare3Params (remote.c:4798)
==11192== by 0x12DECA: remoteDispatchDomainMigratePrepare3ParamsHelper (remote_dispatch.h:5741)
==11192== by 0x5212127: virNetServerProgramDispatchCall (virnetserverprogram.c:435)
==11192== by 0x5211C86: virNetServerProgramDispatch (virnetserverprogram.c:305)
==11192== by 0x520A8FD: virNetServerProcessMsg (virnetserver.c:165)
==11192== by 0x520A9E1: virNetServerHandleJob (virnetserver.c:186)
==11192== by 0x50DA78F: virThreadPoolWorker (virthreadpool.c:144)
==11192== by 0x50DA11C: virThreadHelper (virthreadpthread.c:161)
==11192== Address 0x1368baa0 is 576 bytes inside a block of size 688 free'd
==11192== at 0x4A07F5C: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==11192== by 0x5079A2F: virFree (viralloc.c:580)
==11192== by 0x11456C34: qemuDomainObjPrivateFree (qemu_domain.c:267)
==11192== by 0x50F41B4: virDomainObjDispose (domain_conf.c:2034)
==11192== by 0x50C2991: virObjectUnref (virobject.c:262)
==11192== by 0x50F4CFC: virDomainObjListRemove (domain_conf.c:2361)
==11192== by 0x1145C125: qemuDomainRemoveInactive (qemu_domain.c:2087)
==11192== by 0x11488520: qemuMigrationPrepareAny (qemu_migration.c:2456)
==11192== by 0x11488EA6: qemuMigrationPrepareDirect (qemu_migration.c:2652)
==11192== by 0x114D1509: qemuDomainMigratePrepare3Params (qemu_driver.c:10332)
==11192== by 0x519075D: virDomainMigratePrepare3Params (libvirt.c:7290)
==11192== by 0x1502DA: remoteDispatchDomainMigratePrepare3Params (remote.c:4798)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
(cherry picked from commit 1f2f879ed1)
https://bugzilla.redhat.com/show_bug.cgi?id=1018897
If a PCI deivce is not binded to any driver (e.g. there's yet no PCI
driver in the linux kernel) but still users want to passthru the device
we fail the whole operation as we fail to resolve the 'driver' link
under the PCI device sysfs tree. Obviously, this is not a fatal error
and it shouldn't be error at all.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
(cherry picked from commit df4283a55b)
https://bugzilla.redhat.com/show_bug.cgi?id=1027096
If there's the following snippet in the domain XML, the domain will be
lost upon the daemon restart (if the domain is started prior restart):
<seclabel type='dynamic' relabel='yes'/>
The problem is, the 'label', 'imagelabel' and 'baselabel' are parsed
whenever the VIR_DOMAIN_XML_INACTIVE is *not* present or the label is
static. The latter is not our case, obviously. So, when libvirtd starts
up, it finds domain state xml and parse it. During parsing, many XML
flags are enabled but VIR_DOMAIN_XML_INACTIVE. Hence, our parser tries
to extract 'label', 'imagelabel' and 'baselabel' from the XML which
fails for model='none'. Err, this model - even though not specified in
XML - can be taken from qemu wide config file: /etc/libvirtd/qemu.conf.
However, in order to know we are dealing with model='none' the code in
question must be moved forward a bit. Then a new check must be
introduced. This is what the first two chunks are doing.
But this alone is not sufficient. The domain state XML won't contain the
model attribute without slight modification. The model should be
inserted into the XML even if equal to 'none' and the state XML is being
generated - what if the origin (the @security_driver variable in
qemu.conf) changes during libvirtd restarts?
At the end, a test to catch this scenario is introduced.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
(cherry picked from commit 9fb3f9571d)
For inexplicable reasons, many of the 3rd party package deps
were left against the 'libvirt-daemon' RPM when the drivers
were split out. This makes a minimal install heavier that
it should be. Push them all down into libvirt-daemon-driver-XXX
so they're only pulled in when truly needed
With this change applied, a minimal install of just the
libvirt-daemon-driver-lxc RPM is reduced by 41 MB on a
Fedora 19 host.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 23142ac91a)
The following sequence
1. Define a persistent QMEU guest
2. Start the QEMU guest
3. Stop libvirtd
4. Kill the QEMU process
5. Start libvirtd
6. List persistent guests
At the last step, the previously running persistent guest
will be missing. This is because of a race condition in the
QEMU driver startup code. It does
1. Load all VM state files
2. Spawn thread to reconnect to each VM
3. Load all VM config files
Only at the end of step 3, does the 'virDomainObjPtr' get
marked as "persistent". There is therefore a window where
the thread reconnecting to the VM will remove the persistent
VM from the list.
The easy fix is to simply switch the order of steps 2 & 3.
In addition to this though, we must only attempt to reconnect
to a VM which had a non-zero PID loaded from its state file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit f26701f565)
The 'error' cleanup block in qemuProcessReconnect() had a
'return' statement in the middle of it. This caused a leak
of virConnectPtr & virQEMUDriverConfigPtr instances. This
was identified because netcf recently started checking its
refcount in libvirtd shutdown:
netcfStateCleanup:109 : internal error: Attempt to close netcf state driver with open connections
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 54a2411220)
virDomainObjListLoadAllConfigs sets dom->persistent after
having released its lock on the domain object. This exposes
a possible race condition.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit b260a77e34)
Avoid people introducing security flaws in their apps by
forbidding the use of libvirt.so in setuid programs, with
a check in virInitialize.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 9cd6a57db6)
Most of the usage of getuid()/getgid() is in cases where we are
considering what privileges we have. As such the code should be
using the effective IDs, not real IDs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 9b0af09240)
We already have stubs for getuid, geteuid, getgid but
not for getegid. Something in gnulib already does a
check for it during configure, so we already have the
HAVE_GETEGID macro defined.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit c566fa1ad0)
We don't want setuid programs automatically spawning libvirtd,
so disable any use of autostart when setuid.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 171bb12911)
We don't know enough about quality of external libraries used
for non-UNIX transports, nor do we want to spawn external
commands when setuid. Restrict to the bare minimum which is
UNIX transport for local usage. Users shouldn't need to be
running setuid if connecting to remote hypervisors in any
case.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit e22b0232c7)
The use of getenv is typically insecure, and we want people
to use our wrappers, to force them to think about setuid
needs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 71b21f12be)
Unconditional use of getenv is not secure in setuid env.
While not all libvirt code runs in a setuid env (since
much of it only exists inside libvirtd) this is not always
clear to developers. So make all the code paranoid, even
if it only ever runs inside libvirtd.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 1e4a02bdfe)
When running setuid, we must be careful about what env vars
we allow commands to inherit from us. Replace the
virCommandAddEnvPass function with two new ones which do
filtering
virCommandAddEnvPassAllowSUID
virCommandAddEnvPassBlockSUID
And make virCommandAddEnvPassCommon use the appropriate
ones
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 9b8f307c6a)
In Fedora 20, libvirt_lxc crashes immediately at startup with a
trace
#0 0x00007f0cddb653ec in free () from /lib64/libc.so.6
#1 0x00007f0ce0e16f4a in virFree (ptrptr=ptrptr@entry=0x7f0ce1830058) at util/viralloc.c:580
#2 0x00007f0ce0e2764b in virResetError (err=0x7f0ce1830030) at util/virerror.c:354
#3 0x00007f0ce0e27a5a in virResetLastError () at util/virerror.c:387
#4 0x00007f0ce0e28858 in virEventRegisterDefaultImpl () at util/virevent.c:233
#5 0x00007f0ce0db47c6 in main (argc=11, argv=0x7fff4596c328) at lxc/lxc_controller.c:2352
Normally virInitialize calls virErrorInitialize and
virThreadInitialize, but we don't link to libvirt.so
in libvirt_lxc, and nor did we ever call the error
or thread initializers.
I have absolutely no idea how this has ever worked, let alone
what caused it to stop working in Fedora 20.
In addition not all code paths from virLogSetFromEnv will
ensure virLogInitialize is called correctly, which is another
possible crash scenario.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 97973ebb7a)
The log message regex has been
[0-9]{4}-[0-9]{2}-[0-9]{2} [0-9]{2}:[0-9]{2}:[0-9]{2}\.[0-9]{3}\+[0-9]{4}: [0-9]+: debug|info|warning|error :
The precedence of '|' is high though, so this is equivalent to matching
[0-9]{4}-[0-9]{2}-[0-9]{2} [0-9]{2}:[0-9]{2}:[0-9]{2}\.[0-9]{3}\+[0-9]{4}: [0-9]+: debug
Or
info
Or
warning
Or
error :
Which is clearly not what it should have done. This caused the code to
skip over things which are not log messages. The solution is to simply
add brackets.
A test case is also added to validate correctness.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 5787f0b95e)
Many people will not want the setuid virt-login-shell binary
installed by default, so move it into a separate sub-RPM
named libvirt-login-shell. This RPM is only generated if
LXC is enabled
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 8adc92694f)
