Handle information about filesystems in domain config
and add corresponding devices to container via
parallels sdk.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
PCS removes disk image from filesystem, if you remove it
from config. There is a special flag PVCF_DETACH_HDD_BUNDLE
which allow to remove disk only from VM/CT config.
If you call virDomainDefine and remove some disk from
config it should be preserved, so call PrlVm_CommitEx
always with flag PVCF_DETACH_HDD_BUNDLE.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Obtain information about container's filesystems and
store it in virDomainDef structure.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The virDomainDefineXMLFlags and virDomainCreateXML APIs both
gain new flags allowing them to be told to validate XML.
This updates all the drivers to turn on validation in the
XML parser when the flags are set
The virDomainDefParse* and virDomainDefFormat* methods both
accept the VIR_DOMAIN_XML_* flags defined in the public API,
along with a set of other VIR_DOMAIN_XML_INTERNAL_* flags
defined in domain_conf.c.
This is seriously confusing & error prone for a number of
reasons:
- VIR_DOMAIN_XML_SECURE, VIR_DOMAIN_XML_MIGRATABLE and
VIR_DOMAIN_XML_UPDATE_CPU are only relevant for the
formatting operation
- Some of the VIR_DOMAIN_XML_INTERNAL_* flags only apply
to parse or to format, but not both.
This patch cleanly separates out the flags. There are two
distint VIR_DOMAIN_DEF_PARSE_* and VIR_DOMAIN_DEF_FORMAT_*
flags that are used by the corresponding methods. The
VIR_DOMAIN_XML_* flags received via public API calls must
be converted to the VIR_DOMAIN_DEF_FORMAT_* flags where
needed.
The various calls to virDomainDefParse which hardcoded the
use of the VIR_DOMAIN_XML_INACTIVE flag change to use the
VIR_DOMAIN_DEF_PARSE_INACTIVE flag.
Add missing VNC setup via Parallels SDK.
Parallels Cloud Server starts one VNC server per domain,
so we could process only one VNC server definition.
Network-based listening currently is unimplemented.
Signed-off-by: Alexander Burluka <aburluka@parallels.com>
VIR_STORAGE_FILE_AUTO should be used only in xml provided to
libvirt by user, if I understood correctly. Driver should
set storage source format to specific disk format in
*DomainGetXMLDesc.
CDROMs in PCS use raw image format.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
For SCSI and SATA devices controller and unit are used
to specify drive address. For IDE devices - bus specifies
IDE bus, becase usually there are 2 IDE buses on IDE
controller.
Parallels SDK allows to set drive position by calling
PrlVmDev_SetStackIndex. Since PCS VMs have only one
controller of each type, for SATA and SCSI devices it
simple means position on bus, for IDE devices -
2 * bus_number + position_on_bus.
This patch fixes mapping from libvirt's disk->info.addr.drive
to parallels's 'StackIndex'.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
It seems file format is usually specified event for
real block devices. So report that file format is
raw in virDomainGetXMLDesc and add checks for proper
file format to prlsdkAddDisk.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
NULL value of virDomainVideoAccelDefPtr means default
values for video acceleration, so don't report error in
this case.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
If we want to perform some operation and domain state is not suitable
for that operation, we should report error VIR_ERR_OPERATION_INVALID.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
When PrlJob_GetRetCode sets second argument to
error value it means sdk function failed and we
must return error from getJobResultHelper.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Return error code, returned by parallels SDK from
waitJob and getJobResult, so that caller can handle
different errors.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Get cdrom devices list from parallels server in
prlsdkLoadDomains and add ability to define a domain
with cdroms.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
First, we don't need to call prlsdkApplyConfig after
creating new VM or containers, because it's done in
functions prlsdkCreateVm and prlsdkCreateCt.
No need to check, if domain exists in the list after
prlsdkAddDomain.
Also organize code, so that we can call virObjectUnlock
in one place.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
This patch replaces code, which creates domains by
running prlctl command.
prlsdkCreateVm/Ct will do prlsdkApplyConfig, because
we send request to the server only once in this case.
But prlsdkApplyConfig will be called also from
parallelsDomainDefineXML function. There is no problem with
it, parallelsDomainDefineXML will be refactored later.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Rewrite code, which applies domain configuration given
to virDomainDefineXML function to the VM of container
registered in PCS.
This code first check if there are unsupported parameters
in domain XML and if yes - reports error. Some of such
parameters are not supported by PCS, for some - it's not
obvious, how to convert them into PCS's corresponding params,
so let's put off it, and implement only basic params in
this patch.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Change domain state using parallels SDK functions instead of
prlctl command.
We don't need to send events from these functions now, becase
events handler will send them. But we still need to update
virDomainObj in privconn->domains.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Subscribe to events from parallels server. It's
needed for 2 things: to update cached domains list
and to send corresponding libvirt events.
Parallels server sends a lot of different events, in
this patch we handle only some of them. In the future
we can handle for example, changes in a host network
configuration or devices states.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Move macro parallelsDomNotFoundError to file parallels_utils.h, because
it will be used in parallels_sdk.c.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Obtain information about domains using parallels sdk instead of prlctl.
prlsdkLoadDomains functions behaves as former parallelsLoadDomains with
NULL as second parameter (name) - it fills parallelsConn.domains list.
prlsdkLoadDomain is now able to update specified domain by given
virDomainObjPtr.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
virConnect.privateData is void *, so we can't access
fields of parallelsConn, pointer to which is stored in
virConnect.privateData. So replace all occurences of
conn->privateData->storageState with privconn->storageState.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1159180
The virStoragePoolSourceFindDuplicate only checks the incoming definition
against the same type of pool as the def; however, for "scsi_host" and
"fc_host" adapter pools, it's possible that either some pool "scsi_host"
adapter definition is already using the scsi_hostN that the "fc_host"
adapter definition wants to use or some "fc_host" pool adapter definition
is using a vHBA scsi_hostN or parent scsi_hostN that an incoming "scsi_host"
definition is trying to use.
This patch adds the mismatched type checks and adds extraneous comments
to describe what each check is determining.
This patch also modifies the documentation to be describe what scsi_hostN
devices a "scsi_host" source adapter should use and which to avoid. It also
updates the parent definition to specifically call out that for mixed
environments it's better to define which parent to use so that the duplicate
pool checks can be done properly.
Since the secondary drivers are only active when the primary
driver is also the Parallels driver, there is no need to use the
different type specific privateData fields. The object that was
being stored in the storagePrivateData can easily be kept in the
parallelsConn struct instead.
To prepare for introducing a single global driver, rename the
virDriver struct to virHypervisorDriver and the registration
API to virRegisterHypervisorDriver()
Add files parallels_sdk.c and parallels_sdk.h for code
which works with SDK, so libvirt's code will not mix with
dealing with parallels SDK.
To use Parallels SDK you must first call PrlApi_InitEx function,
and then you will be able to connect to a server with
PrlSrv_LoginLocalEx function. When you've done you must call
PrlApi_Deinit. So let's call PrlApi_InitEx on first .connectOpen,
count number of connections and deinitialize, when this counter
becomes zero.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Coverity complains that calling virNetworkDefFree(def), then jumping
to the cleanup: label which calls virNetworkDefFree(def) could result
in a double_free. Just remove the call from the if statement.
Libvirt measures vram in Kbytes, not in bytes, so calculation
of Mbytes was incorrect. PCS server can take vram argument
with units, so I added K postfix to make params a little bit clearer.
There were numerous places where numatune configuration (and thus
domain config as well) was changed in different ways. On some
places this even resulted in persistent domain definition not to be
stable (it would change with daemon's restart).
In order to uniformly change how numatune config is dealt with, all
the internals are now accessible directly only in numatune_conf.c and
outside this file accessors must be used.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
So far, we only report an error if formatting the siblings bitmap
in NUMA topology fails.
Be consistent and always report error in virCapabilitiesFormatXML.
Only three other callers possibly call closedir on a NULL argument.
Even though these probably won't be used on FreeBSD where this crashes,
let's be nice and only call closedir on an actual directory stream.
4d06af97d3 introduced a possible memory
leak of the memory allocated into the "cpu" pointer in
parallelsBuildCapabilities in the case "nodeGetInfo()" would fail right
after the allocation. Rearrange the code to avoid the possibility of the
leak.
Found by Coverity.
A future patch wants to create disk definitions with non-zero
default contents; to avoid crashes, all callers that allocate
a disk definition should go through a common point.
I found allocation points by looking for any code that increments
ndisks, as well as any matches for ALLOC.*disk. Most places that
modified ndisks were covered by the parse from XML to domain/device
definition by initial domain creation or device hotplug; I also
hand-checked all drivers that generate a device struct on the
fly during getXMLDesc.
* src/conf/domain_conf.h (virDomainDiskDefNew): New prototype.
* src/conf/domain_conf.c (virDomainDiskDefNew): New function.
(virDomainDiskDefParseXML): Use it.
* src/parallels/parallels_driver.c (parallelsAddHddInfo):
Likewise.
* src/qemu/qemu_command.c (qemuParseCommandLine): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc): Likewise.
* src/vmx/vmx.c (virVMXParseDisk): Likewise.
* src/xenxs/xen_sxpr.c (xenParseSxprDisks, xenParseSxpr):
Likewise.
* src/xenxs/xen_xm.c (xenParseXM): Likewise.
* src/libvirt_private.syms (domain_conf.h): Export it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Openstack uses (or will start to using) CPU info from the
capabilities XML. So this section is expanded, added CPU info
about arch, type and info about number of cores, sockets and threads.
Signed-off-by: Eric Blake <eblake@redhat.com>
OpenStack Nova requires this function
to start VM instance. Cpumask info is obtained via prlctl utility.
Unlike KVM, Parallels Cloud Server is unable to set cpu affinity
mask for every VCpu. Mask is unique for all VCpu. You can set it
using 'prlctl set <vm_id|vm_name> --cpumask <{n[,n,n1-n2]|all}>'
command. For example, 'prlctl set SomeDomain --cpumask 0,1,5-7'
would set this mask to yy---yyy.
Signed-off-by: Eric Blake <eblake@redhat.com>
Each VM consists of a set of files in PCS: config, hard
disk images, log file, memory dump. All these files are stored
in a per-vm directory. When we create a new VM, we can ether specify
path to the VM or create the VM in a default path
(<default path>/<vm name>.pvm). This default path can be configured
with command
prlsrvctl user set --def-vm-home <path> command.
Currenty parallels driver creates VM in the same place, where first
hard disk is located. Let's change this logic and create VMs in
the default path. It will be much clearer and allow us to create
VMs without hard disks.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Disks support in this driver was implemented with an assumption,
that disk images can't be created by hand, without VM. So
complex storage driver was implemented with workaround.
This is not true, we can create new disks using ploop tool.
So the first step to reimplement disks support in parallels
driver is to do not use information from the storage driver,
until we will implement VIR_STORAGE_TYPE_VOLUME disks.
So after this patch disks can be added in the same way as
in any other driver: you create a disk image and then add
an entry to the XML definition of the domain with path to that
image file, for example:
<disk type='file' device='disk'>
<driver type='ploop'/>
<source file='/storage/harddisk1.hdd'/>
<target dev='sda' bus='sata'/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
This patch makes parallels storage driver useless, but I'll fix it
later. Now you can create an image by hand, using ploop tool,
and then add it to some domain.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Set file format in virDomainDef structure to produce correct
XML in virDomainGetXMLDesc function.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Add functions parallelsIsAlive, parallelsIsEncrypted,
parallelsIsSecure which are very simple to implement, but
may be required by some libvirt users. Almost all other
drivers have these functions.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
There is a problem with function parallelsDomainDefineXML. If we
are defining a new domain, then we need to do 2 things: aclually
create a VM in PCS and add new domain to the cached list of domains
_parallelsConn.domains.
This is done in the function parallelsLoadDomains. So call to
virDomainObjListAdd will return a error, because a domain
with the same name and id will already be in the list.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
I added this code year ago, instead of implementing ability
to change VNC configuration, which was not trivial, I added
extra call to prlctl, which sets up VNC with auto port, despite
VNC configuration given by a user.
Let's remove this hack, because, first, it doesn't work on the
latest Parallels Cloud Server release (you have to either specify
--vnc-nopasswd option or password). And also has problem with
error handling. If second call to prlctl fails, VM, created by
first call to prlctl, will not be removed.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
virDomainDef.features became an array, so now we can't simply
compare one features variable to another. We need to compare
each each element from the array.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Convert all remaining clients of readdir to use the new
interface, so that we can ensure (unlikely) errors while
reading a directory are reported.
* src/openvz/openvz_conf.c (openvzAssignUUIDs): Use new
interface.
* src/parallels/parallels_storage.c (parallelsFindVolumes)
(parallelsFindVmVolumes): Report readdir failures.
* src/qemu/qemu_driver.c (qemuDomainSnapshotLoad): Ignore readdir
failures.
* src/secret/secret_driver.c (loadSecrets): Likewise.
* src/qemu/qemu_hostdev.c
(qemuHostdevHostSupportsPassthroughVFIO): Report readdir failures.
* src/xen/xen_inotify.c (xenInotifyOpen): Likewise.
* src/xen/xm_internal.c (xenXMConfigCacheRefresh): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Experimentation showed that if virNetworkCreateXML() was called for a
network that was already defined, and then the network was
subsequently shutdown, the network would continue to be persistent
after the shutdown (expected/desired), but the original config would
be lost in favor of the transient config sent in with
virNetworkCreateXML() (which would then be the new persistent config)
(obviously unexpected/not desired).
To fix this, virNetworkObjAssignDef() has been changed to
1) properly save/free network->def and network->newDef for all the
various combinations of live/active/persistent, including some
combinations that were previously considered to be an error but didn't
need to be (e.g. setting a "live" config for a network that isn't yet
active but soon will be - that was previously considered an error,
even though in practice it can be very useful).
2) automatically set the persistent flag whenever a new non-live
config is assigned to the network (and clear it when the non-live
config is set to NULL). the libvirt network driver no longer directly
manipulates network->persistent, but instead relies entirely on
virNetworkObjAssignDef() to do the right thing automatically.
After this patch, the following sequence will behave as expected:
virNetworkDefineXML(X)
virNetworkCreateXML(X') (same name but some config different)
virNetworkDestroy(X)
At the end of these calls, the network config will remain as it was
after the initial virNetworkDefine(), whereas previously it would take
on the changes given during virNetworkCreateXML().
Another effect of this tighter coupling between a) setting a !live def
and b) setting/clearing the "persistent" flag, is that future patches
which change the details of network lifecycle management
(e.g. upcoming patches to fix detection of "active" networks when
libvirtd is restarted) will find it much more difficult to break
persistence functionality.
One of the features of qcow2 is that a wrapper file can have
more capacity than its backing file from the guest's perspective;
what's more, sparse files make tracking allocation of both
the active and backing file worthwhile. As such, it makes
more sense to show allocation numbers for each file in a chain,
and not just the top-level file. This sets up the fields for
the tracking, although it does not modify XML to display any
new information.
* src/util/virstoragefile.h (_virStorageSource): Add fields.
* src/conf/storage_conf.h (_virStorageVolDef): Drop redundant
fields.
* src/storage/storage_backend.c (virStorageBackendCreateBlockFrom)
(createRawFile, virStorageBackendCreateQemuImgCmd)
(virStorageBackendCreateQcowCreate): Update clients.
* src/storage/storage_driver.c (storageVolDelete)
(storageVolCreateXML, storageVolCreateXMLFrom, storageVolResize)
(storageVolWipeInternal, storageVolGetInfo): Likewise.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget)
(virStorageBackendFileSystemRefresh)
(virStorageBackendFileSystemVolResize)
(virStorageBackendFileSystemVolRefresh): Likewise.
* src/storage/storage_backend_logical.c
(virStorageBackendLogicalMakeVol)
(virStorageBackendLogicalCreateVol): Likewise.
* src/storage/storage_backend_scsi.c
(virStorageBackendSCSINewLun): Likewise.
* src/storage/storage_backend_mpath.c
(virStorageBackendMpathNewVol): Likewise.
* src/storage/storage_backend_rbd.c
(volStorageBackendRBDRefreshVolInfo)
(virStorageBackendRBDCreateImage): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskMakeDataVol)
(virStorageBackendDiskCreateVol): Likewise.
* src/storage/storage_backend_sheepdog.c
(virStorageBackendSheepdogBuildVol)
(virStorageBackendSheepdogParseVdiList): Likewise.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Likewise.
* src/conf/storage_conf.c (virStorageVolDefFormat)
(virStorageVolDefParseXML): Likewise.
* src/test/test_driver.c (testOpenVolumesForPool)
(testStorageVolCreateXML, testStorageVolCreateXMLFrom)
(testStorageVolDelete, testStorageVolGetInfo): Likewise.
* src/esx/esx_storage_backend_iscsi.c (esxStorageVolGetXMLDesc):
Likewise.
* src/esx/esx_storage_backend_vmfs.c (esxStorageVolGetXMLDesc)
(esxStorageVolCreateXML): Likewise.
* src/parallels/parallels_driver.c (parallelsAddHddByVolume):
Likewise.
* src/parallels/parallels_storage.c (parallelsDiskDescParseNode)
(parallelsStorageVolDefineXML, parallelsStorageVolCreateXMLFrom)
(parallelsStorageVolDefRemove, parallelsStorageVolGetInfo):
Likewise.
* src/vbox/vbox_tmpl.c (vboxStorageVolCreateXML)
(vboxStorageVolGetXMLDesc): Likewise.
* tests/storagebackendsheepdogtest.c (test_vdi_list_parser):
Likewise.
* src/phyp/phyp_driver.c (phypStorageVolCreateXML): Likewise.
Currently, <cputune><shares>0</shares></cputune> is treated
as if it were not specified.
Treat is as a valid value if it was explicitly specified
and write it to the cgroups.
Part of a series of cleanups to use new accessor methods.
* src/parallels/parallels_driver.c (parallelsGetHddInfo)
(parallelsAddHdd, parallelsApplyDisksParams, parallelsCreateVm):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'uuid' field in virDomainDefPtr is not a pointer, it is a
fixed length array. Calling VIR_ALLOC on it is thus wrong and
leaks memory.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
These all existed before virfile.c was created, and for some reason
weren't moved.
This is mostly straightfoward, although the syntax rule prohibiting
write() had to be changed to have an exception for virfile.c instead
of virutil.c.
This movement pointed out that there is a function called
virBuildPath(), and another almost identical function called
virFileBuildPath(). They really should be a single function, which
I'll take care of as soon as I figure out what the arglist should look
like.
The individual hypervisor drivers were directly referencing
APIs in src/nodeinfo.c in their virDriverPtr struct. Separate
these methods, so there is always a wrapper in the hypervisor
driver. This allows the unused virConnectPtr args to be
removed from the nodeinfo.c file. Again this will ensure that
ACL checks will only be performed on invocations that are
directly associated with public API usage.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the virGetHostname() API has a bogus virConnectPtr
parameter. This is because virtualization drivers directly
reference this API in their virDriverPtr tables, tieing its
API design to the public virConnectGetHostname API design.
This also causes problems for access control checks since
these must only be done for invocations from the public
API, not internal invocation.
Remove the bogus virConnectPtr parameter, and make each
hypervisor driver provide a dedicated function for the
driver API impl. This will allow access control checks
to be easily inserted later.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
POSIX says that both basename() and dirname() may return static
storage (aka they need not be thread-safe); and that they may but
not must modify their input argument. Furthermore, <libgen.h>
is not available on all platforms. For these reasons, you should
never use these functions in a multi-threaded library.
Gnulib instead recommends a way to avoid the portability nightmare:
gnulib's "dirname.h" provides useful thread-safe counterparts. The
obvious dir_name() and base_name() are GPL (because they malloc(),
but call exit() on failure) so we can't use them; but the LGPL
variants mdir_name() (malloc's or returns NULL) and last_component
(always points into the incoming string without modifying it,
differing from basename semantics only on corner cases like the
empty string that we shouldn't be hitting in the first place) are
already in use in libvirt. This finishes the swap over to the safe
functions.
* cfg.mk (sc_prohibit_libgen): New rule.
* src/util/vircgroup.c: Fix offenders.
* src/parallels/parallels_storage.c (parallelsPoolAddByDomain):
Likewise.
* src/parallels/parallels_network.c (parallelsGetBridgedNetInfo):
Likewise.
* src/node_device/node_device_udev.c (udevProcessSCSIHost)
(udevProcessSCSIDevice): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskDeleteVol): Likewise.
* src/util/virpci.c (virPCIGetDeviceAddressFromSysfsLink):
Likewise.
* src/util/virstoragefile.h (_virStorageFileMetadata): Avoid false
positive.
Signed-off-by: Eric Blake <eblake@redhat.com>
Ensure that all drivers implementing public APIs use a
naming convention for their implementation that matches
the public API name.
eg for the public API virDomainCreate make sure QEMU
uses qemuDomainCreate and not qemuDomainStart
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It will simplify later work if the sub-drivers have dedicated
APIs / field names. ie virNetworkDriver should have
virDrvNetworkOpen and virDrvNetworkClose methods
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure that the driver struct field names match the public
API names. For an API virXXXX we must have a driver struct
field xXXXX. ie strip the leading 'vir' and lowercase any
leading uppercase letters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Detected by a simple Shell script:
for i in $(git ls-files -- '*.[ch]'); do
awk 'BEGIN {
fail=0
}
/# *include.*\.h/{
match($0, /["<][^">]*[">]/)
arr[substr($0, RSTART+1, RLENGTH-2)]++
}
END {
for (key in arr) {
if (arr[key] > 1) {
fail=1
printf("%d %s\n", arr[key], key)
}
}
if (fail == 1)
exit 1
}' $i
if test $? != 0; then
echo "Duplicate header(s) in $i"
fi
done;
A later patch will add the syntax-check to avoid duplicate
headers.
This patch refactors various places to allow removing of the
defaultConsoleTargetType callback from the virCaps structure.
A new console character device target type is introduced -
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_NONE - to mark that no type was
specified in the XML. This type is at the end converted to the standard
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL. Other types that are
different from this default have to be processed separately in the
device post parse callback.
Use the virDomainXMLConf structure to hold this data and tweak the code
to avoid semantic change.
Without configuration the KVM mac prefix is used by default. I chose it
as it's in the privately administered segment so it should be usable for
any purposes.
This patch adds instrumentation that will allow hypervisor drivers to
fill and validate domain and device definitions after parsed by the XML
parser.
With this patch, after the XML is parsed, a callback to the driver is
issued requesting to fill and validate driver specific details of the
configuration. This allows to use sensible defaults and checks on a per
driver basis at the time the XML is parsed.
Two callback pointers are stored in the new virDomainXMLConf object:
* virDomainDeviceDefPostParseCallback (devicesPostParseCallback)
- called for a single device parsed and for every single device in a
domain config. A virDomainDeviceDefPtr is passed along with the
domain definition and virCaps.
* virDomainDefPostParseCallback, (domainPostParseCallback)
- A callback that is meant to process the domain config after it's
parsed. A virDomainDefPtr is passed along with virCaps.
Both types of callbacks support arbitrary opaque data passed for the
callback functions.
Errors may be reported in those callbacks resulting in a XML parsing
failure.
This patch is the result of running:
for i in $(git ls-files | grep -v html | grep -v \.po$ ); do
sed -i -e "s/virDomainXMLConf/virDomainXMLOption/g" -e "s/xmlconf/xmlopt/g" $i
done
and a few manual tweaks.
The virCaps structure gathered a ton of irrelevant data over time that.
The original reason is that it was propagated to the XML parser
functions.
This patch aims to create a new data structure virDomainXMLConf that
will contain immutable data that are used by the XML parser. This will
allow two things we need:
1) Get rid of the stuff from virCaps
2) Allow us to add callbacks to check and add driver specific stuff
after domain XML is parsed.
This first attempt removes pointers to private data allocation functions
to this new structure and update all callers and function that require
them.
The parallels storage driver declared some loop variables
inside the for(;;). This is not allowed by libvirt coding
standards
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The bfree and blocks fields are supposed to be in units of frsize. We were
calculating capacity correctly using those units, but the available
calculation was using bsize instead. Most file systems report these as the
same value specifically because many programs are buggy, but that is no
reason to rely on that behavior, or to behave inconsistently.
This bug has been present since e266ded (2008) and aa296e6c, when the code
was originally introduced (the latter via cut and paste).
Signed-off-by: Sage Weil <sage@newdream.net>
To enable virCapabilities instances to be reference counted,
turn it into a virObject. All cases of virCapabilitiesFree
turn into virObjectUnref
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The duplicate VM checking should be done atomically with
virDomainObjListAdd, so shoud not be a separate function.
Instead just use flags to indicate what kind of checks are
required.
This pair, used in virDomainCreateXML:
if (virDomainObjListIsDuplicate(privconn->domains, def, 1) < 0)
goto cleanup;
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def, false)))
goto cleanup;
Changes to
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def,
VIR_DOMAIN_OBJ_LIST_ADD_CHECK_LIVE,
NULL)))
goto cleanup;
This pair, used in virDomainRestoreFlags:
if (virDomainObjListIsDuplicate(privconn->domains, def, 1) < 0)
goto cleanup;
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def, true)))
goto cleanup;
Changes to
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def,
VIR_DOMAIN_OBJ_LIST_ADD_LIVE |
VIR_DOMAIN_OBJ_LIST_ADD_CHECK_LIVE,
NULL)))
goto cleanup;
This pair, used in virDomainDefineXML:
if (virDomainObjListIsDuplicate(privconn->domains, def, 0) < 0)
goto cleanup;
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def, false)))
goto cleanup;
Changes to
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def,
0, NULL)))
goto cleanup;
As a step towards making virDomainObjList thread-safe turn it
into an opaque virObject, preventing any direct access to its
internals.
As part of this a new method virDomainObjListForEach is
introduced to replace all existing usage of virHashForEach
Be sure to VIR_FREE(accel) and moved virDomainVideoDefFree() within no_memory
label to be consistent
Resolve resource leak in parallelsApplyIfaceParams() when the 'oldnet' is
allocated locally. Also virCommandFree(cmd) as necessary.
