With -blockdev it will be possible that a block job loses the disk that
was used to start it to a guest-initiated hot-unplug. Don't emit the
block job events in that case as we can't report the top level source or
disk target for an unplugged (and potentially replugged with different
source) disk.
Eventually when we add machinery for tracking jobs globally for a VM the
event will be reinstated via the domain job event.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
job->newstate is now used internally all the time so there's no need to
clear it as it already has correct value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update schema and configuration to allow specifying new video type of
'bochs'. Add implementation and tests for qemu.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Check whether qemu supports the bochs-display device and set a
capability. Update tests.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Add pool list type flag VIR_CONNECT_LIST_STORAGE_POOLS_ISCSI_DIRECT,
which was forgotten when introducing iscsi-direct pool at f0bf1be3.
https://bugzilla.redhat.com/show_bug.cgi?id=1726609
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The code to check whether a redefined snapshot/checkpoint XML is
attempting to create a cycle in the list of moments is lengthy, and
common between the two types of list. Therefore, it belongs in the
shared base file.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
With systemd activation the passed in file descriptors are required to
be numbered from STDERR_FILENO + 1 onwards. The unit tests thus require
FDs 3, 4 and 5 to be available.
This may not be the case in all environments in which the tests run. For
example on RHEL7 it was seen that a library constructor (gcrypt probably)
opens /dev/urandom and leaves the file handle open. This means FD 3 is
not available and the activation tests fail.
The best way to deal with this would be to create a standalone helper
program for the tests, but that's much more work than just skipping the
tests if we notice we have the problem.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The use of the virNetServerAutoShutdownFunc typedef was removed in
commit 79b8a56995
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Oct 31 19:03:55 2012 +0000
Replace polling for active VMs with signalling by drivers
This unused typedef was then copied into the virNetDaemon object
when that was split off from virNetServer, resulting in a typedef
virNetDaemonAutoShutdownFunc that has never been needed.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The new systemd activation APIs mean there is no longer a need to get
the UNIX socket path associated with a plain FD.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virGetListenFDs method no longer needs to be called directly, so it
can be a static function internal to the systemd code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Using the new system activation APIs allows for simpler code setting up
the network services.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Using the new system activation APIs allows for simpler code setting up
the network services.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The only use of this code was removed by:
commit be78814ae0
Author: Michal Privoznik <mprivozn@redhat.com>
Date: Thu Apr 2 14:41:17 2015 +0200
virNetSocketNewConnectUNIX: Use flocks when spawning a daemon
less than a year after it was first introduced in
commit 1b807f92db
Author: Martin Kletzander <mkletzan@redhat.com>
Date: Wed Jul 16 08:00:19 2014 +0200
rpc: pass listen FD to the daemon being started
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Certain libvirtd.conf settings are not honoured when using systemd
socket activation.
Certain systemd unit file settings must match those defined in
libvirtd.conf for systemd socket activation to work with systemd
version < 227, otherwise libvirtd cannot determine which inherited
FD to use for which service.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since we have socket activation available now, we can let the system
libvirtd exit when it is idle. This allows it to still do autostart
when the host boots up, but when nothing was started it will quickly
exit again until some mgmt app connects to the socket.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We don't do socket activation of libvirtd, since we need to
unconditionally start libvirtd in order to perform autostart. This
doesn't mean we can't have systemd socket units. Some use cases will
not need libvirt's autostart & are thus free to use activation.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virNetServerServiceNewFDOrUNIX method cannot be correctly used when
dealing with systemd activation of a service which can receive more than
one socket FD as there is not guaranteed ordering of FDs.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The current libvirtd code for systemd socket activation assumes socket
FDs are passed in the order unix-rw, unix-ro, unix-admin. There is in
fact no ordering guarantee made by systemd. Applications are expected
to check the address or name associated with each FD to figure out its
identity.
This rewrites libvirtd to make use of the new systemd activation APIs
to make it robust wrt socket ordering changes.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently code has to first create the service and then separately
register it with the server. If the socket associated with a particular
service is not passed from systemd we want to skip creating the service
altogether. This means we can't put the systemd activation logic into
the constructors for virNetServerService.
This patch thus creates some helper methods against virNetServer which
combine systemd activation, service creation and service registration
into one single operation. This operation is automatically a no-op if
systemd activation is present and no sockets were passed in.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the socket code will unlink any UNIX socket path which is
associated with a server socket. This is not fine grained enough, as we
need to avoid unlinking server sockets we were passed by systemd.
To deal with this we must explicitly track whether each socket needs to
be unlinked when closed, separately of the client vs server state.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virNetServerServiceNewFD API only accepts a single FD, but it is
easily changed to allow for an array of FDs to be passed in.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce a virNetServerServiceNewSocket API that allows the various
constructors to share more code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When receiving multiple FDs from systemd during service activation it is
neccessary to identify which purpose each FD is used for. While this
could be inferred by looking for the specific IP ports or UNIX socket
paths, this requires the systemd config to always match what is expected
by the code. Using systemd FD names we can remove this restriction and
simply identify FDs based on an arbitrary name.
The FD names are passed by systemd in the LISTEN_FDNAMES env variable
which is populated with the socket unit file names, unless overriden
by using the FileDescriptorName setting.
This is supported since the system 227 release and unfortunately RHEL7
lacks this version. Thus the code has some back compat support whereby
we look at the TCP ports or the UNIX socket paths to identify what
socket maps to which name. This back compat code is written such that
is it easly deleted when we are able to mandate newer systemd.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When the service passed to getaddrinfo is NULL the kernel will choose a
free port to bind to. In a dual stack though we will get separate
sockets for IPv4 and IPv6 and we need them to bind to the same port
number. Thus once the kerel has auto-selected a port for the first
socket, we must disable auto-select for subsequent IP sockets and force
reuse of the first port.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 035db37394
Even though we only allow using RBD with raw volumes,
removing the options and the default format causes our
parser not to fill out the volume format and the backend code
rejects creating a non-raw volume.
Re-introduce the volume options to fix volume creation while
erroring out on requests to use non-raw formats.
https://bugzilla.redhat.com/show_bug.cgi?id=1724065
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If there are more than 16 images, the memory allocated in images
might be leaked on subsequent execution(s).
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In preparation for adding the bochs display device, refactor the logic
so that each branch handles a single device type and checks its
parameters within that branch. In this case VGA and VMVGA are still
grouped into the same branch since they share device-specific parameter
names.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The cleanup label in virNetworkObjDeletePort() function serves no
purpose. Drop it and thus simplify the function a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The cleanup label in virNetworkObjAddPort() function serves no
purpose. Drop it and thus simplify the function a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The virNetworkObjGetPortStatusDir() function allocates a memory
to construct a path. None of the callers free it leading to a
memleak.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The virtlogd config is set to rollover logs every 2 MB.
Normally a logrotate config file is also installed to handle cases where
virtlogd is disabled. This is set to rollover weekly with no size
constraint.
As a result logrotate can interfere with virtlogd's, rolling over files
that virtlogd has already taken care of.
This changes logrotate configs to rollover based on a max size
constraint of 2 MB + 1 byte. When virtlogd is running the log files will
never get this large, making logrotate a no-op.
If the user changes the size in virtlogd's config to something larger,
they are responsible for also changing the logrotate config suitably.
The LXC/libxl drivers don't use virtlogd, but there logrotate config is
altered to match the QEMU driver config, for the sake of consistency.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Way back in the past, the "no_tty=1" option was added for the remote
driver to disable local password prompting by disabling use of the local
tty:
commit b32f429849
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Fri Sep 21 20:17:09 2007 +0000
Added a no_tty param to remote URIs to stop SSH prompting for password
This was done by adding "-T -o BatchMode=yes -e none" args to ssh. This
achieved the desired results but is none the less semantically flawed
because it is mixing up config parameters for the local tty vs the
remote tty.
The "-T" arg stops allocation of a TTY on the remote host. This is good
for all libvirt SSH tunnels as we never require a TTY for our usage
model, so we should have just passed this unconditionally.
The "-e none" option disables the escape character for sessions with a
TTY. If we pass "-T" this is not required, but it also not harmful to
add it, so we should just pass it unconditionally too.
Only the "-o BatchMode=yes" option is related to disabling local
password prompts and thus needs control via the no_tty URI param.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
For quite some time now it is impossible to connect to a domain
using a HMP monitor, so there is no point in formatting it in the status
XML.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
The getservent() APIs are not re-entrant safe so cannot be used in any
threaded program. Add a wrapper around getaddrinfo() for resolving the
service names to a port number.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It doesn't make sense to have the admin socket active if the main
socket is not running, so bind their lifecycle together.
This ensures that if primary socket is stopped, the corresponding
admin socket is also stopped.
In the reverse, starting the admin socket will also automatically
start the primary socket.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The split is mostly arbitrary, but we purposefully moved
the mips64el builds off sid since currently that container
is failing to build and is thus unavailable.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We really need to change this so that it fetches the image
list dynamically from Quay, but for the time being at least
make sure the static list is accurate.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Up until now, our images have been tagged as "master" instead
of the default "latest" due to the way the build process
worked, but we're using the default now.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When we allow multiple instances of the driver for the same user
account, using a separate root directory, we need to ensure mutual
exclusion. Use a pidfile to guarantee this.
In privileged libvirtd this ends up locking
/var/run/libvirt/bhyve/driver.pid
In unprivileged libvirtd this ends up locking
/run/user/$UID/libvirt/bhyve/run/driver.pid
NB, the latter can vary depending on $XDG_RUNTIME_DIR
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>