Function daemonConfigFilePath() will assign a path to
remote_config_file definitely and the path will be validated
in following codes. So, it's unnecessary to return value
from daemonConfigFilePath() and check the returned value.
Signed-off-by: jiangjiacheng <jiangjiacheng@huawei.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
The password may not be valid in the error branch, but for
higher security, it's better to clean up the memory before
freeing it.
Signed-off-by: jiangjiacheng <jiangjiacheng@huawei.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
We have always considered "migrate_cancel" QMP command to return after
successfully cancelling the migration. But this is no longer true (to be
honest I'm not sure it ever was) as it just changes the migration state
to "cancelling". In most cases the migration is canceled pretty quickly
and we don't really notice anything, but sometimes it takes so long we
even get to clearing migration capabilities before the migration is
actually canceled, which fails as capabilities can only be changed when
no migration is running. So to avoid this issue, we can wait for the
migration to be really canceled after sending migrate_cancel. The only
place where we don't need synchronous behavior is when we're cancelling
migration on user's request while it is actively watched by another
thread.
https://bugzilla.redhat.com/show_bug.cgi?id=2114866
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We will need a little bit more code around qemuMonitorMigrateCancel to
make sure it works as expected. The new qemuMigrationSrcCancel helper
will avoid repeating the code in several places.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Let's call this qemuMigrationSrcCancelUnattended as the function is
supposed to be used when no other thread is watching the migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Just before pushing my earlier commit I've switch order of two
arguments of virProcessGetStatInfo() (as suggested in review).
However, I forgot to swap the arguments in
qemuDomainGetStatsCpuProc() which leads to userTime and sysTime
being swapped.
Fixes: 044b8744d6
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Use approach similar to virFileIsSharedFsFUSE to declaratively handle
the filesystem magic numbers mapping to libvirt's fstypes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The filesystem type magic constant was added for the 'quobyte' shared
filesystem in commit 451094bd15 but is present neither in the kernel
sources nor in coreutils which we've historically used as source of
information.
Since the code dealing with FUSE-based filesystems doesn't need the
constant we can remove it and the now-dead check for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While the code works properly as no code path is specifically wanting to
check for glusterfs, we should properly declare glusterfs as a separate
from GFS2.
Fixes: 478da65fb4
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virFileIsSharedFixFUSE' was used to update the 'f_type' field for
certain shared filesystem types.
This patch renames it to 'virFileIsSharedFsFUSE' and makes it directly
return whether the FUSE filesystem is shared or not and simplifies
additions to the list of shared FUSE filesystems.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Automatically free memory of 'canonPath' so that the failure of
'setmntent' doesn't have to go to 'cleanup'. This allows us to remove
the cleanup section and the 'ret' variable as the rest of the function
can't fail.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Expand some of the uncommon or unobvious filesystem names in a comment.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We populate the bits individually so unsigned is the proper type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit d7ae7ce363 forgot to clean up unused error output files
'boot-dev+order.err' and 'boot-menu-enable-with-timeout-invalid'
after converting tests to DO_TEST_CAPS_LATEST.
Fixes: d7ae7ce363
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
For domains started under session URI, we don't set up CGroups
(well, how could we since we're not running as root anyways).
Nevertheless, fetching CPU statistics exits early because of
lacking cpuacct controller. But with recent extension to
virProcessGetStatInfo() we can get the values we need from the
proc filesystem. Implement the fallback for the session URI as
some of virt tools rely on cpu.* stats to be reported (virt-top,
virt-manager).
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/353
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1693707
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virProcessGetStatInfo() helper parses /proc stat file for
given PID and/or TID and reports cumulative cpuTime which is just
a sum of user and sys times. But in near future, we'll need those
times separately, so make the function return them too (if caller
desires).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After support for the sheepdog storage driver backend was removed we
don't need to install it any longer in the containers.
Regenerate the dockerfiles after:
https://gitlab.com/libvirt/libvirt-ci/-/merge_requests/314
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
qemu-7.1 is released now. Update the capabilities for the final time.
Notable change since last update:
- 'exit-failure' action for 'panic' lifecycle action added
The 'min-xlevel' change is related to upgrade of the host kernel.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Split up the condition and report a different error message when the
host or host config results in S390 PV launch security being
unavailable.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2122534
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
The replacement is 'serial' and 'parallel' respectively introduced at
least in qemu-2.9 and the old versions are deprecated since qemu-6.0
(qemu commit 5965243641d797b22 ).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All of the properties use '-1' as default and the code omits formatting
them when the property is '-1'. Additionally subsequent validation code
rejects all other negative values anyways.
Since we've never formatted '-1' into an XML formatted by libvirt we can
make the parser more strict, as we will never fail to parse existing
on-disk libvirt-owned XMLs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2121627
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move some checks earlier so that they are not tucked at the back of the
block of code doing the actual parsing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'index' is parsed to fit into a signed int but not have negative values.
virXMLPropInt can do that internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor all cases which use virXMLPropInt and then subsequently check
that the parsed value is not '-1'/negative by using the VIR_XML_PROP_NONNEGATIVE
flag for virXMLPropInt.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code attempted to report an error if the user added the 'index'
attribute to the 'target' element, but neglected to actually return an
error code.
Fix it by using the VIR_XML_PROP_NONNEGATIVE flag for virXMLPropInt
which refuses user passed negative numbers.
Fixes: 020dd80ecb
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Code was not indented properly for one of the nested conditions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rewrite the code to use virXMLFormat element so that we can avoid a
bunch of unnecessary checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the PCI controller code into virDomainControllerDefFormatPCI.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Typecast the controller type variable and add all cases to the switch
statement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virtio-*-(non-)-transitional device models which replace the use of
'disable-legacy'/'disable-modern' features were introduced in qemu-4.0.
This means we can remove the specific parts of the code for formatting
the old-style device options and replace all other code to solely depend
on the QEMU_CAPS_VIRTIO_PCI_TRANSITIONAL flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Turn them into DO_TEST_CAPS_LATEST tests so that we are closer to real
world.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As noted by the comments the only difference was the qemu capabilities
asserted. Now that we use only real caps for this test case it makes no
sense to have two copies.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Turn them into DO_TEST_CAPS_VER bound to qemu-4.2 to show the minimum
amount of change. We already have DO_TEST_CAPS_LATEST versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Further patches will try to remove QEMU_CAPS_VIRTIO_PCI_DISABLE_LEGACY,
so add few more modern tests before doing that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Switch from QEMU_CAPS_VIRTIO_PCI_DISABLE_LEGACY to
QEMU_CAPS_VIRTIO_PCI_TRANSITIONAL as it has no impact on the test
output.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU_CAPS_VIRTIO_PCI_TRANSITIONAL is the evolution of
QEMU_CAPS_VIRTIO_PCI_DISABLE_LEGACY from qemu's point of view. Make sure
that we consider both when assesing whether a device belongs on PCIe.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The '<inactiveDomain>' element stores the next-start definition of a VM
on snapshot. It was not covered by the schema when it was introduced.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2121276
Fixes: 152c165d34
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move all definition under the <domain> element into a separate
definition so that it can be referenced from elements with other names.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the overrides into a single file so that later patches can add
another top level element 'inactiveDomain' used in snapshots.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replacing the 'virTestLoadFile' + 'virTestDifferenceFull' by '
virTestCompareToFile' allows to use the VIR_TEST_REGENERATE_OUTPUT=1
option to also generate the output file if it doesn't exist.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Illustrate the problem in the schema fixed by previous commit.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code (since 448be8f706) useds 'vport_ops' in XML.
Later commit cc17f09246 added schema for 'vports_ops' (extra 's').
Fix the schema and the corresponding docs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2121262
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
