The error is a hard error, so the part about fallback doesn't make
sense. Spell the attribute the same way as it's in XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A couple of links were still pointing to the obsolete Go
packages instead of the current module-aware ones.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
For x86, we invalidate qemu caps cache if the host CPUID changed.
However other cpu drivers do not have the 'getHostData' function
implemented.
Skip the comparison if we do not have host CPUData available,
since virCPUDataIsIdentical always returns an error in that case.
https://bugzilla.redhat.com/show_bug.cgi?id=2030119
Fixes: 3bc6f46d30
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Outline some of the basics and the caveats of the non-shared migration
code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After conversion the table doesn't have to custom colors, but otherwise
seems to hold well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use it to enable the 'write-blocking' mode of 'blockdev-mirror'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Non-shared storage migration of guests which are disk I/O intensive and
have fast local storage may actually never converge if the guest happens
to dirty the disk faster than it can be copied.
This patch introduces a new flag
'VIR_MIGRATE_NON_SHARED_SYNCHRONOUS_WRITES' which will instruct
hypervisors to synchronize local I/O writes with the writes to remote
storage used for migration so that the guest can't overwhelm the
migration. This comes at a cost of decreased local I/O performance for
guests which behave well on average.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make the macro useful also for cases when one of multiple flags is
required.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate the paragraphs where the topic changes to simplify further
additions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Using whitespace to align the '=' and values doesn't make sense for the
virDomainMigrateFlags enum as the visual block is interrupted by
comments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Wire up the flag to enable the 'write-blocking' 'copy-mode' of
'blockdev-mirror'.
It's not supported by all qemu versions but it is with those which we
use -blockdev with so we can use that instead of adding another custom
capability as we use blockdev for some time now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In cases when the destination storage is slower than the normal VM
storage and the VM does intensive I/O to the disk a block copy job may
never converge.
Switching it to synchronous mode will ensure that all writes done by the
guest are propagated to the destination at the cost of slowing down I/O
of the guest to the synchronous speed.
This patch adds the new API flag and implements virsh support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Forces the data to be written synchronously to both the original and the
mirrored images which ensures that the job will reach synchronized
phase.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the construction of the command from the variable declaration so
that it doesn't exceed the line length and we can also move the logic of
determining the protocol outside of the command construction.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The migration API takes specific flags which are then converted to
boolean parameters for the command. Extract the flag into helper
variables rather than using ternary operators while constructing the
command itself.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of a ternary operator we can use the existing helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the cleanup sections where not needed after we've converted to
automatic freeing of virJSONValue.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the code to use g_autoptr for the few cases sill using explicit
cleanup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor the control flow so we can remove the cleanup label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Don't use 'goto' for looping. Extract the monitor interaction code into
a new function and restructure the logic to avoid jumping back in the
code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Don't use 'goto' for looping. Extract the sync sending code into a new
function and restructure the logic to avoid jumping back in the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the unlinking of the state file right after reading it so that we
can get rid of the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the unlinking of the state file earlier and get rid of the cleanup
label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert two temp strings and one virJSONValue to g_auto(free|ptr).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virJSONValueObjectAdd instead of step-by-step construction of the
object. This also removes a handful impossible to reach errors with
translatable messages.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We use this approach for other APIs which take a virJSONValue as
argument and the logic is also simpler.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are a few uses which still explicitly free JSON objects, fix them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Whenever virPCIGetNetName() is called, it is either called with
physPortID = NULL, or with it set by the caller calling
virNetDevGetPhysPortID() soon before virPCIGetNetName(). The
physPortID is then used *only* in virPCIGetNetName().
Rather than replicating that same call to virNetDevGetPhysPortID() in
all the callers of virPCIGetNetName(), lets just have all those
callers send the NetDevName whose physPortID they want down to
virPCIGetNetName(), and let virPCIGetNetName() call
virNetDevGetPhysPortID().
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 795e9e05c3 (libvirt-7.7.0) refactored the code in virpci.c and
virnetdev.c that gathered lists of the Virtual Functions (VF) of an
SRIOV Physical Function (PF) to simplify the code.
Unfortunately the simplification made the assumption, in the new
function virPCIGetVirtualFunctionsFull(), that a VF's netdev
interface name should only be retrieved if the PF had a valid
phys_port_id. That is an incorrect assumption - only a small handful
of (now previous-generation) Mellanox SRIOV cards actually use
phys_port_id (this is for an odd design where there are multiple
physical network ports on a single PCI address); all other SRIOV cards
(including new Mellanox cards) have a file in sysfs called
phys_port_id, but it can't be read, and so the pfPhysPortID string is
NULL.
The result of this logic error is that virtual networks that are a
pool of VFs to be used for macvtap connections will be unable to
start, giving an errror like this:
VF 0 of SRIOV PF enp130s0f0 couldn't be added to the interface pool because it isn't bound to a network driver - possibly in use elsewhere
This error message is misinformed - the caller of
virNetDevGetVirtualFunctionsFull() only *thinks* that the VF isn't
bound to a network driver because it doesn't see a netdev name for the
VF in the list. But that's only because
virNetDevGetVirtualFunctionsFull() didn't even try to get the names!
We do need a way for virPCIGetVirtualFunctionsFull() to sometimes
retrieve the netdev names and sometimes not. One way of doing that
would be to send down the netdev name of the PF whenever we also want
to know the netdev names of the VFs, but send a NULL when we
don't. This can conveniently be done by just *replacing* pfPhysPortID
in the arglist with pfNetDevName - pfPhysPortID is determined by
simply calling virNetDevGetPhysPortID(pfNetDevName) so we can just
make that call down in virPCIGetVirtualFunctionsFull() (when needed).
This solves the regression introduced by commit 795e9e05c3, and also
nicely sets us up to (in a subsequent commit) move the call to
virNetDevGetPhysPortID() down one layer further to virPCIGetNetName(),
where it really belongs!
Resolves: https://bugzilla.redhat.com/2025432
Fixes: 795e9e05c3
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The Homebrew package explicitly enables this driver despite us
disabling it by default on macOS, so it must be functional to
at least some extent and certainly can't be causing any build
failures.
Additionally, if the user has explicitly asked for the network
driver to be enabled but libvirtd is disabled for whatever
reason, we should error out instead of silently disabling the
network driver.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous cleanups some labels became needless because they
contain just a return statement. There's no point in having such
labels.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of calling virDomainDefFree() explicitly, we can annotate
variables with g_autoptr().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of calling VIR_FREE() explicitly, we can annotate
variables with g_autofree.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>