This is convenience macro, use it more. This commit was generated
using the following spatch:
@@
symbol node;
identifier old;
identifier ctxt;
type xmlNodePtr;
@@
- xmlNodePtr old;
+ VIR_XPATH_NODE_AUTORESTORE(ctxt);
...
- old = ctxt->node;
... when != old
- ctxt->node = old;
@@
symbol node;
identifier old;
identifier ctxt;
type xmlNodePtr;
@@
- xmlNodePtr old = ctxt->node;
+ VIR_XPATH_NODE_AUTORESTORE(ctxt);
... when != old
- ctxt->node = old;
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This partially reverts fe65e9c8b5.
In the referenced commit I removed @ret from
virHostValidateBhyve() thinking it wasn't used when in fact it is
- it's usage is hidden under MODULE_STATUS_WARN(). Reintroduce
the variable back.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are few places where a return variable is introduced (ret
or retval), but then is never changed and is then passed to
return. Well, we can return the value that the variable is
initialized to directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
After the commit dc0771c, ret variable no longer
represents the status of the return code, use
data->ret replace it.
Signed-off-by: Xu Yandong <xuyandong2@huawei.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In some cases it's useful to report the error which caused the domain
job to fail. Add an optional field for holding the error message so that
it can be later retrieved from statistics of a completed job.
Add the field name macro and code for extracting it in virsh.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When the job monitoring logic was refactored, these two commands
were not converted properly and the result is that a successful
dump or migration (char '0') would be reported as a failed one
(int 48) instead.
Fixes: dc0771cfa2
Reported-by: Brian Rak <brak@gameservers.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 86608f787e added the above flag as an alias for ambiguous
'delete-snapshots' flag, but forgot to actually change the code that
extracts it, thus the new version actually doesn't work.
https://bugzilla.redhat.com/show_bug.cgi?id=1821988
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We've adopted reStructuredText as the primary markup language for
our documentation and, given that both GitLab and GitHub can render
documents in this format just fine, it makes sense to get rid of
the few last remaining bits of Markdown and standardize on
reStructuredText across the board.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Redeclared variables in script functions marked as local.
Variables `guest_running` and `guests_shutting_down` in the
functions 'guest_is_on` and `check_guests_shutdown` were
untouched, as the functions returned values in these
variables.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We're going to add many more later, so start by adjusting the
existing ones to more closely follow the example set by libvirtd.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Unfortunately, yajl_free() is not NOP on NULL. It really does
expect a valid pointer. Therefore, check whether the pointer we
want to pass to it is NULL or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
POWER hosts does not implement CPU virtualization extensions like
x86 or s390x. Instead, all bare-metal POWER hosts are considered
to be virtualization ready.
For POWER, the validation is done by checking if the virtualization
module kvm_hv is loaded in the host. If not, we should warn the
user about it.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
wire-up virAdmServerUpdateTlsFiles API into virt-admin client.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: Wu Qingliang <wuqingliang4@huawei.com>
Use 'g_autoptr' which mandates initialization for 'hostname' and also
for 'domain' to allow full refactor of the cleanup path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Include virutil.h in all files that use it,
instead of relying on it being pulled in somehow.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
After the introduction of virenum.h in commit 285c5f28c4,
it is only needed in the C file.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Historically, this file was a dump for most of our helper
functions and needed almost everywhere.
With the introduction of virfile.h and virstring.h,
and more importantly, virenum.h and the introduction
of GLib, that is no longer true.
Remove its include from C files that don't even use it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Simplify gathering the actual return value from a passed-through QMP
command when using 'qemu-monitor-command' by adding '--return-value'
switch which just extracts the 'return' section and alternatively
reports an error if the section is not present.
This simplifies gathering of some test data where the full reply would
need to be trimmed just for the actual return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This deletes all trace of gnulib from libvirt. We still
have the keycodemapdb submodule to deal with. The simple
solution taken was to update it when running autogen.sh.
Previously gnulib could auto-trigger refresh when running
'make' too. We could figure out a solution for this, but
with the pending meson rewrite it isn't worth worrying
about, given how infrequently keycodemapdb changes.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
For long running jobs (save, managed save, dump & live migrate)
virsh runs a background thread for executing the job and then
has the main thread catch Ctrl-C for graceful shutdown, as well
as displaying progress info.
The monitoring code is written using poll, with a pipe used
to get the completion status from the thread. Using a pipe
and poll is problematic for Windows portability. This rewrites
the code to use a GMainLoop instance for monitoring stdin and
doing progress updates. The use of a pipe is entirely eliminated,
instead there is just a shared variable between both threads
containing the job completion status.
No mutex locking is used because the background thread writes
to the variable only when the main loop is still running,
while the foreground thread only reads it after the main loop
has exited.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Pvpanic device supports bit 1 as crashloaded event, it means that
guest actually panicked and run kexec to handle error by guest side.
Handle crashloaded as a lifecyle event in libvirt.
Test case:
Guest side:
before testing, we need make sure kdump is enabled,
1, build new pvpanic driver (with commit from upstream
e0b9a42735f2672ca2764cfbea6e55a81098d5ba
191941692a3d1b6a9614502b279be062926b70f5)
2, insmod new kmod
3, enable crash_kexec_post_notifiers,
# echo 1 > /sys/module/kernel/parameters/crash_kexec_post_notifiers
4, trigger kernel panic
# echo 1 > /proc/sys/kernel/sysrq
# echo c > /proc/sysrq-trigger
Host side:
1, build new qemu with pvpanic patches (with commit from upstream
600d7b47e8f5085919fd1d1157f25950ea8dbc11
7dc58deea79a343ac3adc5cadb97215086054c86)
2, build libvirt with this patch
3, handle lifecycle event and trigger guest side panic
# virsh event stretch --event lifecycle
event 'lifecycle' for domain stretch: Crashed Crashloaded
events received: 1
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
The O_SYNC flag is not defined on Windows platforms.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This addreses portability to Windows and standardizes
error reporting. This fixes a number of places which
failed to set O_CLOEXEC or failed to report errors.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Always trim the full specified suffix.
All of the callers outside of tests were passing either
strlen or the actual length of the string.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Replace all the cases that only supply the length
and do not care about matching a suffix, as well
as that one test case that does.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
rpmlint complains about "script-without-shebang" due to the execute
permissions on /usr/share/bash-completion/completions/vsh. Use
INSTALL_DATA instead of INSTALL_SCRIPT to avoid the unnecessary
execute permissions.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The Windows platform does not have the signal handling
support we need, so it must be disabled in several parts
of the codebase.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The combination of g_unichar_iszerowidth and
g_unichar_iswide is sufficient to replicate the logic
of wcwidth() for libvirt.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently we rely on gnulib creating configmake.h, but we
can easily create it ourselves instead.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This imports a simpler version of GNULIB's getpass() function
impl for Windows. Note that GNULIB's impl was buggy as it
returned a static string on UNIX, and a heap allocated string
on Windows. This new impl always heap allocates.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Simplify human usage of secret-set-value by adding --interactive which
will read the value of the secret from the terminal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Allow using the contents of --file without base64 decoding.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Print a warning if users pass in secrets as command line arguments and
mention it in the man page.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The necessity to specify the secret value as command argument is
insecure. Allow reading the secret from a file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Users might want to get the raw value instead of dealing with base64
encoding. This might be useful for redirection to file and also for
simple human-readable secrets.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Automatically clean the secret object and get rid of the cleanup label
and 'ret' valiable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Automatically clean the secret object and get rid of the cleanup label
and 'ret' valiable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Similarly to other libvirt object freeing APIs the function resets the
libvirt error when called and doesn't take NULL gracefully. Install the
workaround and g_autoptr handlers similarly to the 'virshDomain' type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
gmtime_r/localtime_r are mostly used in combination with
strftime to format timestamps in libvirt. This can all
be replaced with GDateTime resulting in simpler code
that is also more portable.
There is some boundary condition problem in parsing POSIX
timezone offsets in GLib which tickles our test suite.
The test suite is hacked to avoid the problem. The upsteam
GLib bug report is
https://gitlab.gnome.org/GNOME/glib/issues/1999
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The GNULIB termios module ensures termios.h exists (but
is none the less empty) when building for Windows. We
already exclude usage of the functions that would exist
in a real termios.h, so having an empty termios.h is
not especially useful.
It is simpler to just put all use of termios.h related
functions behind a "#ifndef WIN32" conditional.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
G_STATIC_ASSERT() is a drop-in functional equivalent of
the GNULIB verify() macro.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce a vastly simpler VIR_INT64_STR_BUFLEN constant
which is large enough for all cases where we currently
use INT_BUFSIZE_BOUND. This eliminates most use of the
gnulib intprops.h header.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Our virsh already has 'domhostname' command. Add '--source'
argument to it so that users can chose between 'lease' and
'agent' sources. Also, implement completer for the argument.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
--tls-destination would be just ignored unless --tls is not specified,
which is correct, but let's provide a bit of a guidance is a user
forgets to add --tls.
This is just a virsh-only check targeted to end users as we don't
currently have such checks at the API level for migration parameters
that depend on flags.
https://bugzilla.redhat.com/show_bug.cgi?id=1784345
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
