Introducing keepalive similarly to Guannan around 2 years ago. Since
we want to introduce keepalive for every connection, it makes sense to
wrap the connecting function into new virsh one that can deal
keepalive as well.
Function vshConnect() is now used for connecting and keepalive added
in that function (if possible) helps preventing long waits e.g. while
nework goes down during migration.
This patch also adds the options for keepalive tuning into virsh and
fails connecting only when keepalives are explicitly requested and
cannot be set (whether it is due to missing support in connected
driver or remote server). If not explicitely requested, a debug
message is printed (hence the addition to virsh-optparse test).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1073506
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=822839
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
'virsh lxc-enter-namespace' does not have a way to reflect exit
status to the caller in single-command mode, but we might as well
at least report the exit status. Prior to this patch,
$ virsh -c lxc:/// lxc-enter-namespace shell /bin/sh 'exit 3'; echo $?
1
now it gives some details:
$ virsh -c lxc:/// lxc-enter-namespace shell /bin/sh -c 'exit 3'; echo $?
error: internal error: Child process (31557) unexpected exit status 3
1
Also useful:
$ virsh -c lxc:/// lxc-enter-namespace shell /bin/sh -c 'kill $$'; echo $?
error: internal error: Child process (31585) unexpected fatal signal 15
1
* tools/virsh-domain.c (cmdLxcEnterNamespace): Avoid magic numbers.
Dispatch any error.
* tools/virsh.pod: Document that non-zero exit status is collapsed.
Signed-off-by: Eric Blake <eblake@redhat.com>
Similar to our event-test demo program, it's nice to be able to
have a mode where we can sniff all events at once, rather than
having to spawn multiple virsh in parallel with one for each
event type.
(Can I just say our RegisterAny design is lousy? The fact that
the majority of our callback pointers have a function signature
with the opaque data in a different position, and that we have
to cast the function signature before registering it, makes it
hard to write a generic callback function; we have to write one
for every type of event id. Life would have been easier if we
had designed the callback as a fixed signature with a void*
and size parameter, and then allowed the caller to downcast
the void* to a particular struct for data specific to their
callback id, where we could have then had a single function
with a switch statement for each event id, and register that
one function for all types of events. It would also be nicer
if the callback functions knew which callbackID was being used
when invoking that callback, so that I could use a common data
structure among all registrations instead of having to create
an array of one data per callback. But I really don't want to
go add yet another event API design.)
* tools/virsh-domain.c (cmdEvent): Add --all parameter; convert
all callbacks to support shared counter.
* tools/virsh.pod (event): Document it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add 'virsh net-event --list' and 'virsh net-event [net] --event=name
[--loop] [--timeout]'. Very similar to 'virsh event'.
* tools/virsh.pod (net-event): Document new command.
* tools/virsh-network.c (vshNetworkEventToString, vshNetEventData)
(vshEventLifecyclePrint, cmdNetworkEvent): New struct and
functions.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add 'virsh event --list' and 'virsh event [dom] --event=name
[--loop] [--timeout]'. Borrows somewhat from event-test.c,
but defaults to a one-shot notification, and takes advantage
of the event loop integration to allow Ctrl-C to interrupt the
wait for an event. For now, this just does lifecycle events.
* tools/virsh.pod (event): Document new command.
* tools/virsh-domain.c (vshDomainEventToString)
(vshDomainEventDetailToString, vshDomEventData)
(vshEventLifecyclePrint, cmdEvent): New struct and functions.
Signed-off-by: Eric Blake <eblake@redhat.com>
Recent autotest/virt-test testing on f20 discovered an anomaly in how
the bandwidth options are documented and used. This was discovered due
to a bug fix in the /sbin/tc utility found in iproute-3.11.0.1 (on f20)
in which overflow was actually caught and returned as an error. The fix
was first introduced in iproute-3.10 (search on iproute2 commit 'a303853e').
The autotest/virt-test test for virsh domiftune was attempting to send
the largest unsigned integer value (4294967295) for maximum value
testing. The libvirt xml implementation was designed to manage values
in kilobytes thus when this value was passed to /sbin/tc, it (now)
properly rejected the 4294967295kbps value.
Investigation of the problem discovered that formatdomain.html.in and
formatnetwork.html.in described the elements and property types slightly
differently, although they use the same code - virNetDevBandwidthParseRate()
(shared by portgroups, domains, and networks xml parsers). Rather than
have the descriptions in two places, this patch will combine and reword
the description under formatnetwork.html.in and have formatdomain.html.in
link to that description.
This documentation faux pas was continued into the virsh man page where
the bandwidth description for both 'attach-interface' and 'domiftune'
did not indicate the format of each value, thus leading to the test using
largest unsigned integer value assuming "bps" rather than "kbps", which
ultimately was wrong.
And provide domain summary stat in that case, for lxc backend.
Use case is a container inheriting all devices from the host,
e.g. when doing application containerization.
For pool which relies on remote resources, such as a "iscsi" type
pool, since how long it takes to export the corresponding devices
to host's sysfs is really depended, it could depend on the network
connection, it also could depend on the host's udev procedures. So
it's likely that the volumes are not able to be detected during pool
starting process, polling the sysfs doesn't work, since we don't
know how much time is best for the polling, and even worse, the
volumes could still be not detected or partly not detected even after
the polling. So we end up with a documentation to prompt the fact,
in virsh manual.
And as a small improvement, let's explicitly say no LUNs found in
the debug log in that case.
Explicitly lists the possible values for "--target" option;
Gets rid of the confused strings like "Suspend-to-RAM";
Emphasises the node *has to* be suspended in the time duration
specified by "--duration". And rewords the entire document a
bit according to the API's implementation and document.
With this patch, user can setup the throttle blkio cgorup
for domain through the virsh cmd, such as:
virsh blkiotune domain1 --device-read-bytes-sec /dev/sda1,1000000,/dev/sda2,2000000
--device-write-bytes-sec /dev/sda1,1000000 --device-read-iops-sec /dev/sda1,10000
--device-write-iops-sec /dev/sda1,10000,/dev/sda2,0
This patch also add manpage for these new options.
Signed-off-by: Guan Qiang <hzguanqiang@corp.netease.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Recent addition of the gluster pool type omitted fixing the virsh and
virConnectListAllStoragePool filters. A typecast of the converting
function in virsh showed that also the sheepdog pool was omitted in the
command parser.
This patch adds gluster pool filtering support and fixes virsh to
properly convert all supported storage pool types. The added typecast
should avoid doing such mistakes in the future.
https://bugzilla.redhat.com/show_bug.cgi?id=1044445
When undefining a VM with storage the man page doesn't explicitly
mention that the volumes need to be a part of the storage pool otherwise
it won't work.
Though trying to destroy a physical HBA doesn't make sense at all,
it's still a bit misleading with saying "only works for HBA".
Signed-off-by: Osier Yang <jyang@redhat.com>
Allow adjust the number of commands to remember in the command
history.
* tools/virsh.c (vshReadlineInit): Read and sanity the
VIRSH_HISTSIZE variable.
(VIRSH_HISTSIZE_MAX): New constant.
* tools/virsh.pod: Document VIRSH_HISTSIZE variable.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit e962a57 added 'attach-disk --shareable', even though we
already had 'attach-disk --mode=shareable'. Worse, if the user
types 'attach-disk --mode=readonly --shareable', we create
non-sensical XML. The best solution is just to undocument the
duplicate spelling, by having it fall back to the preferred
spelling.
* tools/virsh-domain.c (cmdAttachDisk): Let alias handling fix our
mistake in exposing a second spelling for an existing option.
* tools/virsh.pod: Fix documentation.
Signed-off-by: Eric Blake <eblake@redhat.com>
The parameter allows overriding default listen address for '-incoming'
cmd line argument on destination.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After commit 8aecd35126 it'll detect
that a required option is not defined and it will assert and exit with:
virsh.c:1364: vshCommandOpt: Assertion `valid->name' failed.
Problem has been latent since commit ed23b106.
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently the virConnectBaselineCPU API does not expose the CPU features
that are part of the CPU's model. This patch adds a new flag,
VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES, that causes the API to explicitly
list all features that are part of that model.
Signed-off-by: Don Dugger <donald.d.dugger@intel.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Add a "--pass-fds N,M,..." arg to the virsh start/create
methods. This allows pre-opened file descriptors from the
shell to be passed on into the guest
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Use the virDomainSetMemoryStatsPeriodFlags() to pass a period defined by
usage of a new --period option in order to set the collection period for the
balloon driver. This may enable or disable the collection based on the value.
Add the --current, --live, & --config options to dommemstat.
Paolo Bonzini pointed out that it's actually possible to migrate a qemu
instance that was paused due to I/O error and it will be able to work on
the destination if the storage is accessible.
This patch introduces flag VIR_MIGRATE_ABORT_ON_ERROR that cancels the
migration in case an I/O error happens while it's being performed and
allows migration without this flag. This flag can be possibly used for
other error reasons that may be introduced in the future.
This patch fixes changes done in commit 29c1e913e4
that was pushed without implementing review feedback.
The flag introduced by the patch is changed to VIR_DOMAIN_VCPU_GUEST and
documentation makes the difference between regular hotplug and this new
functionality more explicit.
The virsh options that enable the use of the new flag are changed to
"--guest" and the documentation is fixed too.
This flag will allow to use qemu guest agent commands to disable
(offline) and enable (online) processors in a live guest that has the
guest agent running.
Explicitly state that using incomplete XML definition snippets for hot-management
commands may have unexpected results due to autogenerating values for some of
the fields if they aren't specified explicitly.
Newer pod (hello rawhide) complains if you attempt to mix bullets
and non-bullets in the same list:
virsh.pod around line 3177: Expected text after =item, not a bullet
As our intent was to nest an inner list, we make that explicit to
keep pod happy.
* tools/virsh.pod (ENVIRONMENT): Use correct pod syntax.
virsh schedinfo was able to set only one parameter at a time (not
counting the deprecated options), but it is useful to set more at
once, so this patch adds the possibility to do stuff like this:
virsh schedinfo <domain> cpu_shares=0 vcpu_period=0 vcpu_quota=0 \
emulator_period=0 emulator_quota=0
Invalid scheduler options are reported as well. These were previously
reported only if the command hadn't updated any values (when
cmdSchedInfoUpdate returned 0).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=810078
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=919372
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=919375
The virsh(1) man page wasn't saying anything about the 'migrateuri'
parameter other than it can be usually omitted. A patched version of
docs/migrate.html.in is taken in this patch to fix that up in the man
page.
The man page states that with --config the next boot is affected. This
can be understood as if _only_ the next boot was affected. This isn't
true if the machine is running.
This patch adds the full --live, --config, --current infrastructure and
tweaks stuff to correctly support the obsolete --persistent flag.
Note that this patch changes the the behavior of the --config flag to match the
use of this flag in rest of libvirt. This flag was mistakenly renamed from
--persistent that originaly had different semantics.
VIR_CONNECT_LIST_NODE_DEVICES_CAP_FC_HOST to filter the FC HBA,
and VIR_CONNECT_LIST_NODE_DEVICES_CAP_VPORTS to filter the FC HBA
which supports vport.
The docs assumed the command works always for QEMU and other
hypervisors. As this is done using the balloon mechainism live increase
of the maximum memory limit isn't supported. Fix the docs to mention
this limitation.
Clarify that net-create deals with a transient virtual
network whereas net-define defines a persistent virtual
network definition and will create the network (xml)
definition file.
Clarify that net-destroy works with both transient and
persistent virtual networks.
Signed-off-by: Gene Czarcinski <gene@czarc.net>
Only nodedev-destroy and nodedev-dumpxml can benifit from the
new API, other commands like nodedev-detach only works for
PCI devices, WWN makes no sense for them.
When a disk-only snapshot is requested the domain is treated as if it
was offline. This forbids to mix memory checkpoints with the DISK_ONLY
flag.
This patch improves the error message and mentions the restriction in
the virsh man page.
Add a 'lxc-enter-namespace' command which accepts a domain name
and then a command + args to run, attached to the container
eg
virsh -c lxc:/// lxc-enter-namespace demo -- /bin/ps -auxf
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Offline migration transfers inactive definition of a domain (which may
or may not be active). After successful completion, the domain remains
in its current state on source host and is defined but inactive on
destination host. It's a bit more clever than virDomainGetXMLDesc() on
source host followed by virDomainDefineXML() on destination host, as
offline migration will run pre-migration hook to update the domain XML
on destination host. Currently, copying non-shared storage is not
supported during offline migration.
Offline migration can be requested with a new migration flag called
VIR_MIGRATE_OFFLINE (which has to be combined with
VIR_MIGRATE_PERSIST_DEST flag).
As we enable more modes of snapshot creation, it becomes more important
to be able to quickly filter based on snapshot properties. This patch
introduces new filter flags; subsequent patches will introduce virsh
back-compat filtering, as well as actual libvirt filtering.
* include/libvirt/libvirt.h.in (virDomainSnapshotListFlags): Add
five new flags in two new groups.
* src/libvirt.c (virDomainSnapshotNum, virDomainSnapshotListNames)
(virDomainListAllSnapshots, virDomainSnapshotNumChildren)
(virDomainSnapshotListChildrenNames)
(virDomainSnapshotListAllChildren): Document them.
* src/conf/snapshot_conf.h (VIR_DOMAIN_SNAPSHOT_FILTERS_STATUS)
(VIR_DOMAIN_SNAPSHOT_FILTERS_LOCATION): Add new convenience filter
collection macros.
* tools/virsh-snapshot.c (cmdSnapshotList): Add 5 new flags.
* tools/virsh.pod (snapshot-list): Document them.
This reverts commits 5f63a5cb42
and ff86b0c97b. After much list
discussion, consensus was that libvirt aliases should be reserved
to correct typos, otherwise it risks confusion. Rather, we
should implement a way for users to provide their own aliases
as part of their virsh configuration preferences.
External checkpoints could be created with snapshot-create, but
without libvirt supplying a default name for the memory file,
it is essential to add a new argument to snapshot-create-as to
allow the user to choose the memory file name. This adds the
option --memspec [file=]name[,snapshot=type], where type can
be none, internal, or external. For an example,
virsh snapshot-create-as $dom --memspec /path/to/file
is the shortest possible command line for creating an external
checkpoint, named after the current timestamp.
* tools/virsh-snapshot.c (vshParseSnapshotMemspec): New function.
(cmdSnapshotCreateAs): Use it.
* tests/virsh-optparse (test_url): Test it.
* tools/virsh.pod (snapshot-create-as): Document it.
Make it clear that the alternate terms have no difference except
for length of time they were supported.
* tools/virsh.pod (start, shutdown, reboot): More documentation.
https://bugzilla.redhat.com/show_bug.cgi?id=873344 suggested that
the grouping 'boot', 'shutdown', 'reboot'; as well as the grouping
'start', 'stop', 'restart'; might be easier to remember than the
current mix of 'start', 'shutdown', 'reboot'.
Also, touch up the wording of 'reboot' to be more accurate.
* tools/virsh-domain.c (domManagementCmds): Add other command names.
* tools/virsh.pod (start, shutdown, reboot): Document the aliases.
The default behavior while creating external checkpoints is to pause the
guest while the memory state is captured. We want the users to sacrifice
space saving for creating the memory save image while the guest is live
to minimize downtime.
This patch adds a flag that causes the guest not to be paused before
taking the snapshot.
*include/libvirt/libvirt.h.in:
- add new paused reason: VIR_DOMAIN_PAUSED_SNAPSHOT
- add new flag for taking snapshot: VIR_DOMAIN_SNAPSHOT_CREATE_LIVE
*tools/virsh-domain-monitor.c:
- add string representation for VIR_DOMAIN_PAUSED_SNAPSHOT
*tools/virsh-snapshot.c:
- add support for VIR_DOMAIN_SNAPSHOT_CREATE_LIVE
*tools/virsh.pod:
- add docs for --live option added to use
VIR_DOMAIN_SNAPSHOT_CREATE_LIVE flag
We always expose individual bits from flags as separate options rather
than exposing a raw flags options. Since virNodeSuspendForDuration does
not currently support any flags, the only way of using this --flags
options that would not fail is "--flags 0", which is equivalent to
omitting the option. Thus it is highly unlikely anyone would actually be
using it and removing it should be safe.
https://bugzilla.redhat.com/show_bug.cgi?id=869100 mentioned some
confusion about 'virsh snapshot-list' errors. Clean up a
misleading error message, and add some documentation.
* tools/virsh-snapshot.c (cmdSnapshotList): Mention --current
rather than --from when appropriate.
* tools/virsh.pod (snapshot-list): Mention that the named starting
point is NOT part of the list except under --tree.
Upstream kernel introduced new sysfs knob "merge_across_nodes" to
specify if pages from different numa nodes can be merged. When set
to 0, only pages which physically reside in the memory area of
same NUMA node can be merged. When set to 1, pages from all nodes
can be merged.
This patch supports the tuning by adding new param field
"shm_merge_across_nodes".
Using VIR_DOMAIN_XML_MIGRATABLE flag, one can request domain's XML
configuration that is suitable for migration or save/restore. Such XML
may contain extra run-time stuff internal to libvirt and some default
configuration may be removed for better compatibility of the XML with
older libvirt releases.
This flag may serve as an easy way to get the XML that can be passed
(after desired modifications) to APIs that accept custom XMLs, such as
virDomainMigrate{,ToURI}2 or virDomainSaveFlags.
I was using qemu-monitor-command during development, and found it quite
hard to use. Compare the results of this patch on ease of reading:
$ virsh qemu-monitor-command dom '{"execute":"query-version"}'
{"return":{"qemu":{"micro":1,"minor":12,"major":0},"package":"(qemu-kvm-0.12.1.2)"},"id":"libvirt-7683"}
$ virsh qemu-monitor-command --pretty dom '{"execute":"query-version"}'
{
"return": {
"qemu": {
"micro": 1,
"minor": 12,
"major": 0
},
"package": "(qemu-kvm-0.12.1.2)"
},
"id": "libvirt-7674"
}
* tools/virsh-host.c (cmdQemuMonitorCommand): New option.
* tools/virsh.pod (qemu-monitor-command): Document it.
This command uses the new virNetworkUpdate() API to modify an existing
network definition, and optionally have those modifications take
effect immediately without restarting the network.
An example usage:
virsh net-update mynet add-last ip-dhcp-host \
"<host mac='00:11:22:33:44:55' ip='192.168.122.45'/>" \
--live --config
If you like, you can instead put the xml into a file, and call like
this:
virsh net-update mynet add ip-dhcp-host /tmp/myxml.xml
--live --config
virsh will autodetect whether the argument is itself an xml element,
or if it's a file, by looking at the first character - the first
character of an xml element is always "<", and the first character of
a file is almost always *not* "<" (in the rare case that it is, the
user could specify "./<filename...").
A --parent-index option is also available (to give the index within a
list of parent objects, e.g. the index of the parent <ip> element when
updating ip-dhcp-host elements), but is optional and at least for now
will probably be used rarely.
--live, --config, and --current options - if you specify --live, only
the live state of the network will be updated. If you also specify
--config, then the persistent configuration will also be updated;
these two commands can be given separately, or both together. If you
don't specify either (you can optionally specify "--current" for the
same effect), then the "current" config will be updated (i.e. if the
network is active, then only its live config is affected, but if the
network is inactive, only the persistent config is affected).
The new command 'virsh blockcommit $dom $disk' requests the start
of an asynchronous commit operation across the entire chain of
$disk. Further arguments can fine-tune which portion of the
chain is committed. Existing 'virsh blockjob' commands can then
track the status, change the bandwidth, or abort the commit job.
With a bit more on the command line, 'virsh blockcommit $dom $disk
--wait --verbose' can be used for blocking behavior, with visual
feedback on the overall status, and can be canceled with Ctrl-C.
The overall design, including the wait loop logic, borrows heavily
from the existing blockpull command.
* tools/virsh-domain.c (cmdBlockCommit): New function.
* tools/virsh.pod (blockcommit): Document it.
New command node-memory-tune to get/set the node memory parameters,
only two parameters are allowed to set (pages_to_scan, and sleep_millisecs,
see documents in this patch for more details).
Example of node-memory-tune's output:
Shared memory:
pages_to_scan 100
sleep_millisecs 20
pages_shared 0
pages_sharing 0
pages_unshared 0
pages_volatile 0
full_scans 0
This introduces four new options for secret-list, to filter the
returned secrets by whether it's ephemeral or not, and/or by
whether it's private or not.
* tools/virsh-secret.c: (New helper vshSecretSorter,
vshSecretListFree, and vshCollectSecretList; Use the new
API for secret-list; error out if flags are specified,
because there is no way to filter the results when using
old APIs (no APIs to get the properties (ephemeral, private)
of a secret yet).
* tools/virsh.pod: Document the 4 new options.
tools/virsh-nodedev.c:
* vshNodeDeviceSorter to sort node devices by name
* vshNodeDeviceListFree to free the node device objects list.
* vshNodeDeviceListCollect to collect the node device objects, trying
to use new API first, fall back to older APIs if it's not supported.
* Change option --cap to accept multiple capability types.
tools/virsh.pod
* Update document for --cap
tools/virsh-network.c:
* vshNetworkSorter to sort networks by name
* vshNetworkListFree to free the network objects list.
* vshNetworkListCollect to collect the network objects, trying
to use new API first, fall back to older APIs if it's not supported.
* New options --persistent, --transient, --autostart, --no-autostart,
for net-list, and new field 'Persistent' for its output.
tools/virsh.pod:
* Add documents for the new options.
tools/virsh-pool.c:
* vshStoragePoolSorter to sort the pool list by pool name.
* struct vshStoragePoolList to present the pool list, pool info
is collected by list->poolinfo if 'details' is specified by
user.
* vshStoragePoolListFree to free the pool list
* vshStoragePoolListCollect to collect the pool list, new API
virStorageListAllPools is tried first, if it's not supported,
fall back to older APIs.
* New options --persistent, --transient, --autostart, --no-autostart
and --type for pool-list. --persistent or --transient is to filter
the returned pool list by whether the pool is persistent or not.
--autostart or --no-autostart is to filter the returned pool list
by whether the pool is autostarting or not. --type is to filter
the pools by pool types. E.g.
% virsh pool-list --all --persistent --type dir,disk
tools/virsh.pod:
* Add documentations for the new options.
The storage pool's management doesn't relate with a domain, it
probably was an intention, but not achieved yet. And the fact
is only active pools are listed by default.
The bandwidth units for blockpull and blockcopy are in Megabytes per
Second, not Megabits per Second.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch adds two macros: VIR_DOMAIN_SCHEDULER_EMULATOR_PERIOD,
VIR_DOMAIN_SCHEDULER_EMULATOR_QUOTA for controlling cpu bandwidth
for emulator activities not tied to vcpus
Change the permissible minimum value of nodesuspend duration time
to 60 seconds. If option is less than the value, reports error.
Update virsh help and manpage the infomation.
When --direct is used when migrating a domain running on a hypervisor
that does not support direct migration (such as QEMU), the caller would
get the following error message:
this function is not supported by the connection driver:
virDomainMigrateToURI2
which is a complete nonsense since qemu driver implements
virDomainMigrateToURI2. This patch would emit a more sensible error in
this case:
Requested operation is not valid: direct migration is not supported
by the connection driver
v2:
- Refactored to use virBuffer
- Refactored to use virXPath wrappers
- Added support for tls-port and password for SPICE
- Added optional flag to disable SPICE password to the URI
- Added support for RDP
- Fixed code reviews
Add a new 'domdisplay' command that provides a URI for VNC, SPICE and
RDP connections. Presently the 'vncdisplay' command provides you with
the port info that QEMU is listening on but there is no counterpart for
SPICE and RDP. Additionally this provides you with the bind address as
specified in the XML, which the existing 'vncdisplay' lacks. For SPICE
connections it supports secure and unsecure channels and optionally
providing the password for the SPICE channel.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Storage is one of the last domains in libvirt where we don't fully
utilize inactive and live XML. Okay, it might be because we don't
have support for that. So implement such support. However, we need
to fallback when talking to old daemon which doesn't support this
new flag called VIR_STORAGE_XML_INACTIVE.
This patch makes use of the newly added api virConnectListAllDomains()
to list domains in virsh.
Virsh now represents lists of domains using an internal structure
vshDomainList. This structure contains the virDomainPtr list as provided
by virConnectListAllDomains() and the count of domains in the list.
For backwards compatibility, the function vshDomainListCollect was added
that tries to enumerate the domains using the new API and if the API is
not supported falls back to the older approach with the two list
functions. The helper function also simulates filtering by all
currently supported flags added with virConnectListAllDomains().
This patch also cleans up the "list" command handler to use the new
helpers and adds new command line flags to make use of filtering.
Previously, to get the name of all snapshots with children, it was
necessary to get the name of all snapshots and then remove the
name of leaf snapshots. This is racy, and somewhat inefficient
compared to planned API additions. We can emulate --no-metadata on
0.9.5-0.9.12, but for now, there is no emulation of --no-leaves.
* tools/virsh.c (cmdSnapshotList): Add new options --no-leaves and
--no-metadata.
(vshSnapshotList): Emulate where possible.
* tools/virsh.pod (snapshot-list): Document them.
as we are missing:
attach-disk: --type can accept 'lun' too, not just cdrom or floppy.
attach-disk: --target specify logical device name, not path
attach-interface: --target silently drops strings with vnet* prefix
commit 52d064f42d added
VIR_NETWORK_XML_INACTIVE in order to allow suppressing the
auto-generated list of VFs in network definitions, and a --inactive
flag to virsh net-dumpxml to take advantage of the flag. However, it
missed out on two opportunities:
1) Use INACTIVE to get the current config of the network as it
exists on disk, rather than the currently active config.
2) Add INACTIVE to the flags used for the virsh net-edit command, so
that it won't include the forward-pool interfaces that were
autogenerated, and so that a re-edit of the network prior to
restarting it will show any other edits made since the last restart
of the network. (prior to this patch, if you edited a network a 2nd
time without restarting, all of the previous edits would magically
disappear).
In order to fit with the new #define-based generic edit function in
virsh.c, a new function vshNetworkGetXMLDesc() was added. This
function first tries to call virNetworkGetXMLDesc with the INACTIVE
flag added, then retries without if the first attempt fails (in the
manner expected when the server doesn't support it).
Expose the recent API additions in virsh. Borrows ideas from 'dominfo'
for the general type of information to display.
Output looks like:
$ tools/virsh snapshot-info fedora-local tmp
Name: tmp
Domain: fedora-local
Current: no
State: disk-snapshot
Parent: -
Children: 1
Descendants: 2
Metadata: yes
possibly with fewer lines when talking to older servers.
* tools/virsh.c (cmdSnapshotInfo): New command.
* tools/virsh.pod (snapshot-info): Document it.
Rather than further overloading 'blockpull', I decided to create a
new virsh command to expose the new flags of virDomainBlockRebase.
Blocking until the command completes naturally is pointless, since
the block copy job is intended to run indefinitely. Instead, I
made the command support three --wait modes: by default, it runs until
mirroring is started; with --pivot, it pivots as soon as mirroring
is started; and with --finish, it aborts (for a clean copy) as
soon as mirroring is started.
* tools/virsh.c (VSH_CMD_BLOCK_JOB_COPY): New mode.
(blockJobImpl): Support new flags.
(cmdBlockCopy): New command.
(cmdBlockJob): Support new job info, new abort flag.
* tools/virsh.pod (blockcopy, blockjob): Document the new command
and flags.
I'm tired of shell-scripting to wait for completion of a block pull,
when virsh can be taught to do the same. I couldn't quite reuse
vshWatchJob, as this is not a case of a long-running command where
a second thread must be used to probe job status (at least, not unless
I make virsh start doing blocking waits for an event to fire), but it
served as inspiration for my simpler single-threaded loop. There is
up to a half-second delay between sending SIGINT and the job being
aborted, but I didn't think it worth the complexity of a second thread
and use of poll() just to minimize that delay.
* tools/virsh.c (cmdBlockPull): Add new options to wait for
completion.
(blockJobImpl): Add argument.
(cmdBlockJob): Adjust caller.
* tools/virsh.pod (blockjob): Document new mode.
Block job cancellation can take a while. Now that upstream qemu 1.1
has asynchronous block cancellation, we want to expose that to the user.
Therefore, the following updates are made to the virDomainBlockJob API:
A new block job event type VIR_DOMAIN_BLOCK_JOB_CANCELED is managed by
libvirt. Regardless of the flags used with virDomainBlockJobAbort, this
event will be raised: 1. when using synchronous block_job_cancel (the
event will be synthesized by libvirt), and 2. whenever it is received
from qemu (via asynchronous block-job-cancel). Note that the event
may be detected by libvirt even before the virDomainBlockJobAbort
completes (always true when it is synthesized, but also possible if
cancellation was fast).
A new extension flag VIR_DOMAIN_BLOCK_JOB_ABORT_ASYNC is added to the
virDomainBlockJobAbort API. When enabled, this function will allow
(but not require) asynchronous operation (ie, it returns as soon as
possible, which might be before the job has actually been canceled).
When the API is used in this mode, it is the responsibility of the
caller to wait for a VIR_DOMAIN_BLOCK_JOB_CANCELED event or poll via
the virDomainGetBlockJobInfo API to check the cancellation status.
This patch also exposes the new flag through virsh, and makes virsh
slightly easier to use (--async implies --abort, and lack of any options
implies --info), although it leaves the qemu implementation for later
patches.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The documentation for the flag doesn't clearly state that the flag only
enhances the output and the user needs to specify other flags to list
inactive domains, that are enhanced by this flag.
Currently, we put no strains on escape sequence possibly leaving users
with console that cannot be terminated. However, not all ASCII
characters can be used as escape sequence. Only those falling in
@ - _ can be; implement and document this constraint.
Commit d42a2ff forgot to touch up virsh documentation, and commit
4e9953a mis-spelled the option name.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Fix typo
and match recent change in flag meaning.
Right now, it is appallingly easy to cause qemu disk snapshots
to alter a domain then fail; for example, by requesting a two-disk
snapshot where the second disk name resides on read-only storage.
In this failure scenario, libvirt reports failure, but modifies
the live domain XML in-place to record that the first disk snapshot
was taken; and places a difficult burden on the management app
to grab the XML and reparse it to see which disks, if any, were
altered by the partial snapshot.
This patch adds a new flag where implementations can request that
the hypervisor make snapshots atomically; either no changes to
XML occur, or all disks were altered as a group. If you request
the flag, you either get outright failure up front, or you take
advantage of hypervisor abilities to make an atomic snapshot. Of
course, drivers should prefer the atomic means even without the
flag explicitly requested.
There's no way to make snapshots 100% bulletproof - even if the
hypervisor does it perfectly atomic, we could run out of memory
during the followup tasks of updating our in-memory XML, and report
a failure. However, these sorts of catastrophic failures are rare
and unlikely, and it is still nicer to know that either all
snapshots happened or none of them, as that is an easier state to
recover from.
* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_CREATE_ATOMIC): New flag.
* src/libvirt.c (virDomainSnapshotCreateXML): Document it.
* tools/virsh.c (cmdSnapshotCreate, cmdSnapshotCreateAs): Expose it.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Document
it.
This introduces a new domain state pmsuspended to represent
the domain which has been suspended by guest power management,
e.g. (entered itno s3 state). Because a "running" state could
be confused in this case, one will see the guest is paused
actually while playing. And state "paused" is for the domain
which was paused by virDomainSuspend.
virsh.pod had several instances in which it referred to "the
documentation" which was a little puzzling to me since it is
documentation. Reading the document from end to end makes it clear
that it means a specific URI which was noted previously in the text,
but I had never noticed those URIs in several years of referring to
the man page. This patch adds those URIs to several additional places
in the text.
Currently if the URI passed to virConnectOpen* is NULL, then we
- Look for LIBVIRT_DEFAULT_URI env var
- Probe for drivers
This changes it so that
- Look for LIBVIRT_DEFAULT_URI env var
- Look for 'uri_default' in $HOME/.libvirt/libvirt.conf
- Probe for drivers
Since VIR_DOMAIN_AFFECT_{LIVE,CONFIG,CURRENT} was created,
all new virsh commands use "--config" to represents the
persistent changing. This patch add "--config" option
for the old commands which still use "--persistent",
and "--persistent" is now alias of "--config".
tools/virsh.c: (use "--config", and "--persistent" is
alias of "--config" now).
cmdDomIfSetLink, cmdDomIfGetLink, cmdAttachDevice,
cmdDetachDevice, cmdUpdateDevice, cmdAttachInterface,
cmdDetachInterface, cmdAttachDisk, cmdDetachDisk
toos/virsh.pod: Update docs of the changed commands, and
add some missed docs for "--config" (detach-interface,
detach-disk, and detach-device).
The last vestige of the inaccurate 'kilobytes' when we meant 1024 is
now gone. And virsh is now useful for setting memory in units other
than KiB.
* tools/virsh.c (cmdSetmem, cmdSetmaxmem): Use new helper routine,
allow passing bogus arguments on to hypervisor to test driver
sanity checking, and fix leak on parse error.
(vshMemtuneGetSize): New helper.
(cmdMemtune): Use it.
* tools/virsh.pod (setmem, setmaxmem, memtune): Document this.
Now can now do:
virsh vol-resize $vol 10M
virsh blockresize $dom $vol 10M
to get both interfaces to resize to 10MiB. The remaining wart
is that vol-resize defaults to bytes, but blockresize defaults
to KiB, but we can't break existing scripts; oh well, it's no
worse than the same wart of the underlying virDomainBlockResize.
The API for virStorageVolResize states that capacity must always
be positive, and that the presence of shrink and delta flags is
what implies a negative change.
* tools/virsh.c (vshCommandOptScaledInt): New function.
(cmdVolResize): Don't pass negative size.
(cmdVolSize): Rename...
(vshVolSize): ...and use new helper routine.
(cmdBlockResize): Use new helper routine, and support new bytes
flag.
* tools/virsh.pod (NOTES): Document suffixes.
(blockresize, vol-create-as, vol-resize): Point to notes.
Just because our public API has a typo doesn't mean that virsh
has to keep the typo.
* tools/virsh.c (VSH_CMD_FLAG_ALIAS): New flag.
(nodedevCmds): Use it.
(cmdHelp): Omit alias commands.
(cmdNodeDeviceDettach): Rename...
(cmdNodeDeviceDetach): ...to this.
* tools/virsh.pod (nodedev-detach): Document it.
Command line interfaces should use dash, not underscore, as many
keyboard layouts allow that to be typed with fewer shift key presses.
Also, the US spelling of --tunneled gets more google hits than the
UK spelling of --tunnelled.
* tools/virsh.c (opts_migrate): Allow US variant.
(opts_blkdeviotune): Prefer - over _.
* tools/virsh.pod (blkdeviotune): Fix spelling.
In the past, we have created some virsh options with less-than-stellar
names. For back-compat reasons, those names must continue to parse,
but we don't want to document them in help output. This introduces
a new option type, an alias, which points to a canonical option name
later in the option list.
I'm actually quite impressed that our code has already been factored
to do all option parsing through common entry points, such that I
got this added in relatively few lines of code!
* tools/virsh.c (VSH_OT_ALIAS): New option type.
(opts_echo): Hook up an alias, for easy testing.
(vshCmddefOptParse, vshCmddefHelp, vshCmddefGetOption): Allow for
aliases.
* tools/virsh.pod (NOTES): Document promise of back-compat.
* tests/virshtest.c (mymain): Test new feature.
Now virsh can call virDomainBlockRebase.
* tools/virsh.c (cmdBlockPull): Add --base parameter.
(blockJobImpl): Use it to expose BlockRebase API.
* tools/virsh.pod (blockpull): Document it.
The current scrub version doesn't support pfitzner7, pfitzner33 and schneier
patterns on RHEL, we should comment it in virsh man page.
* tools/virsh.pod: update wiping algorithms docs.
Signed-off-by: Alex Jia <ajia@redhat.com>
This patch adds support for the newly introduced
VIR_DOMAIN_CONSOLE_FORCE and VIR_DOMAIN_CONSOLE_SAFE flags. The console
command now has an optional parameter --force that specifies that the
user wants to forcibly interrupt an ongoing console session and create
a new one. Flag --safe requests that the console should be opened only
if the hypervisor driver supports safe console handling.
The behaviour to this point was that the daemon opened two streams to
the console, that competed for data from the pipe, and the result was
that both of the consoles ended up scrambled.
This patch doesn't modify operation of other commands dealing with
console connections (start, create) as those open connections to newly
started domains making it virtually impossible for another client to race
for the console and steal it.
* tools/console.c:
- add support for flag passthrough
* tools/console.h:
- modify function prototypes to match impl.
* tools/virsh.c:
- add flag --force for the console command
This patch adds new options to the "virsh list" command enabling
filtering of persistent and transient domains along with the option to
print only UUIDs or names of domains instead of printing the table.
Option --name prints domain names (one per line) instead of the default
table. Similarly --uuid prints domain's UUID. The option --table is
an alias for the default behavior.
Aditionally --persistent and/or --transient may be specified to filter
the output of domains.
Commit fad5cd2108 introduced option to
display domain's title in the list command output. There was a mistake
in the virsh man page example for this command stating --note instead of
--title.
When blkdeviotune was first committed in 0.9.8, we had the limitation
that setting one value reset all others. But bytes and iops should
be relatively independent. Furthermore, setting tuning values on
a live domain followed by dumpxml did not output the new settings.
* src/qemu/qemu_driver.c (qemuDiskPathToAlias): Add parameter, and
update callers.
(qemuDomainSetBlockIoTune): Don't lose previous unrelated
settings. Make live changes reflect to dumpxml output.
* tools/virsh.pod (blkdeviotune): Update documentation.
This patch adds a new command "desc" to show and modify titles and
description for the domains using the new API.
This patch also adds a new flag for the "list" command to show titles in
the domain list, to allow easy identification of VMs by storing a short
description.
Example:
virsh # list --title
Id Name State Title
-----------------------------------------------
0 Domain-0 running Mailserver 1
2 fedora paused
