The duplicate VM checking should be done atomically with
virDomainObjListAdd, so shoud not be a separate function.
Instead just use flags to indicate what kind of checks are
required.
This pair, used in virDomainCreateXML:
if (virDomainObjListIsDuplicate(privconn->domains, def, 1) < 0)
goto cleanup;
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def, false)))
goto cleanup;
Changes to
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def,
VIR_DOMAIN_OBJ_LIST_ADD_CHECK_LIVE,
NULL)))
goto cleanup;
This pair, used in virDomainRestoreFlags:
if (virDomainObjListIsDuplicate(privconn->domains, def, 1) < 0)
goto cleanup;
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def, true)))
goto cleanup;
Changes to
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def,
VIR_DOMAIN_OBJ_LIST_ADD_LIVE |
VIR_DOMAIN_OBJ_LIST_ADD_CHECK_LIVE,
NULL)))
goto cleanup;
This pair, used in virDomainDefineXML:
if (virDomainObjListIsDuplicate(privconn->domains, def, 0) < 0)
goto cleanup;
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def, false)))
goto cleanup;
Changes to
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def,
0, NULL)))
goto cleanup;
As a step towards making virDomainObjList thread-safe turn it
into an opaque virObject, preventing any direct access to its
internals.
As part of this a new method virDomainObjListForEach is
introduced to replace all existing usage of virHashForEach
A followon to commit id: 68dceb635 - if iface->iname is NULL, then
neither virNetDevOpenvswitchRemovePort() nor virNetDevVethDelete()
should be called. Found by Coverity.
The use of switch statements inside a bounded for loop resulted in some
false positives regarding the "default:" label which cannot be reached
since each of the other case statements use the possible for loop values.
The virDomainObj, qemuAgent, qemuMonitor, lxcMonitor classes
all require a mutex, so can be switched to use virObjectLockable
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently all classes must directly inherit from virObject.
This allows for arbitrarily deep hierarchy. There's not much
to this aside from chaining up the 'dispose' handlers from
each class & providing APIs to check types.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
libvirt lxc will fail to start when selinux is disabled.
error: Failed to start domain noroot
error: internal error guest failed to start: PATH=/bin:/sbin TERM=linux container=lxc-libvirt container_uuid=b9873916-3516-c199-8112-1592ff694a9e LIBVIRT_LXC_UUID=b9873916-3516-c199-8112-1592ff694a9e LIBVIRT_LXC_NAME=noroot /bin/sh
2013-01-09 11:04:05.384+0000: 1: info : libvirt version: 1.0.1
2013-01-09 11:04:05.384+0000: 1: error : lxcContainerMountBasicFS:546 : Failed to mkdir /sys/fs/selinux: No such file or directory
2013-01-09 11:04:05.384+0000: 7536: info : libvirt version: 1.0.1
2013-01-09 11:04:05.384+0000: 7536: error : virLXCControllerRun:1466 : error receiving signal from container: Input/output error
2013-01-09 11:04:05.404+0000: 7536: error : virCommandWait:2287 : internal error Child process (ip link del veth1) unexpected exit status 1: Cannot find device "veth1"
fix this problem by checking if selinuxfs is mounted
in host before we try to create dir /sys/fs/selinux.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
The virDomainLxcOpenNamespace method needs to open every file
in /proc/$INITPID/ns and return the open file descriptor to the
client application.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch introduces support for LXC specific public APIs. In
common with what was done for QEMU, this creates a libvirt_lxc.so
library and libvirt/libvirt-lxc.h header file.
The actual APIs are
int virDomainLxcOpenNamespace(virDomainPtr domain,
int **fdlist,
unsigned int flags);
int virDomainLxcEnterNamespace(virDomainPtr domain,
unsigned int nfdlist,
int *fdlist,
unsigned int *noldfdlist,
int **oldfdlist,
unsigned int flags);
which provide a way to use the setns() system call to move the
calling process into the container's namespace. It is not
practical to write in a generically applicable manner. The
nearest that we could get to such an API would be an API which
allows to pass a command + argv to be executed inside a
container. Even if we had such a generic API, this LXC specific
API is still useful, because it allows the caller to maintain
the current process context, in particular any I/O streams they
have open.
NB the virDomainLxcEnterNamespace() API is special in that it
runs client side, so does not involve the internal driver API.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
when we has no host's src mapped to container.
there is no .oldroot dir,so libvirt lxc will fail
to start when mouting meminfo.
in this case,the parameter srcprefix of function
lxcContainerMountProcFuse should be NULL.and make
this method handle NULL correctly.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
To avoid confusion between the LXC driver <-> controller
monitor RPC protocol and the libvirt-lxc.so <-> libvirtd public
RPC protocol, rename the former to lxc_monitor_protocol.x
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The code for setting up a private /dev/pts for the containers
is also responsible for making the LXC controller have a
private mount namespace. Unfortunately the /dev/pts code is
not run if launching a container without a custom root. This
causes the LXC FUSE mount to leak into the host FS.
To bring in line with new naming practice, rename the=
src/util/cgroup.{h,c} files to vircgroup.{h,c}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert the host capabilities and domain config structs to
use the virArch datatype. Update the parsers and all drivers
to take account of datatype change
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Wire up the attach/detach device drivers in LXC to support the
hotplug/unplug of host misc devices.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Wire up the attach/detach device drivers in LXC to support the
hotplug/unplug of host storage devices.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Wire up the attach/detach device drivers in LXC to support the
hotplug/unplug of USB host devices.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Wire up the attach/detach/update device APIs to support changing
of hostdevs in the persistent config file
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Wire up the attach/detach/update device APIs to support changing
of disks in the persistent config file
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Wire up the attach/detach/update device APIs to support changing
of network interfaces in the persistent config file
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This wires up the LXC driver to support the domain device attach/
detach/update APIs, following the same code design as used in
the QEMU driver. No actual changes are possible with this commit,
it is only providing the framework
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This extends support for host device passthrough with LXC to
cover misc devices. In this case all we need todo is a
mknod in the container's /dev and whitelist the device in
cgroups
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This extends support for host device passthrough with LXC to
cover storage devices. In this case all we need todo is a
mknod in the container's /dev and whitelist the device in
cgroups
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This adds support for host device passthrough with the
LXC driver. Since there is only a single kernel image,
it doesn't make sense to pass through PCI devices, but
USB devices are fine. For the latter we merely need to
make the /dev/bus/usb/NNN/MMM character device exist
in the container's /dev
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently LXC guests can be given arbitrary pre-mounted
filesystems, however, for some usecases it is more appropriate
to provide block devices which the container can mount itself.
This first impl only allows for <disk type='block'>, in other
words exposing a host disk device to a container. Since LXC
does not have device namespace virtualization, we are cheating
a little bit. If the XML specifies /dev/sdc4 to be given to
the container as /dev/sda1, when we do the mknod /dev/sda1
in the container's /dev, we actually use the major:minor
number of /dev/sdc4, not /dev/sda1.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The code for creating veth/macvlan devices is part of the
LXC process startup code. Refactor this a little and export
the methods to the rest of the LXC driver. This allows them
to be reused for NIC hotplug code
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
These classes can borrow unused bandwidth. Basically,
only egress qdsics can have classes, therefore we can
do this kind of traffic shaping only on host's outgoing,
that is domain's incoming traffic.
Currently to deal with auto-shutdown libvirtd must periodically
poll all stateful drivers. Thus sucks because it requires
acquiring both the driver lock and locks on every single virtual
machine. Instead pass in a "inhibit" callback to virStateInitialize
which drivers can invoke whenever they want to inhibit shutdown
due to existance of active VMs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add support for doing controlled shutdown / reboot in the LXC
driver. The default behaviour is to try talking to /dev/initctl
inside the container's virtual root (/proc/$INITPID/root). This
works with sysvinit or systemd. If that file does not exist
then send SIGTERM (for shutdown) or SIGHUP (for reboot). These
signals are not any kind of particular standard for shutdown
or reboot, just something apps can choose to handle. The new
virDomainSendProcessSignal allows for sending custom signals.
We might allow the choice of SIGTERM/HUP to be configured for
LXC containers via the XML in the future.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virStateInitialize method and several cgroups methods were
using an 'int privileged' parameter or similar for dual-state
values. These are better represented with the bool type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Implement the new API for sending signals to processes in a guest
for the LXC driver. Only support sending signals to the init
process for now, because
- The kernel does not appear to expose the mapping between
container PID numbers and host PID numbers anywhere in the
host OS namespace
- There is no race-free way to validate whether a host PID
corresponds to a process in a container.
* src/lxc/lxc_driver.c: Allow sending processes signals
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
we already have virtualize meminfo for container through fuse filesystem,
add function lxcContainerMountProcFuse to mount this meminfo file to
the container's /proc/meminfo.
So we can isolate container's /proc/meminfo from host now.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
with this patch,container's meminfo will be shown based on
containers' mem cgroup.
Right now,it's impossible to virtualize all values in meminfo,
I collect some values such as MemTotal,MemFree,Cached,Active,
Inactive,Active(anon),Inactive(anon),Active(file),Inactive(anon),
Active(file),Inactive(file),Unevictable,SwapTotal,SwapFree.
if I miss something, please let me know.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
this patch addes fuse support for libvirt lxc.
we can use fuse filesystem to generate sysinfo dynamically,
So we can isolate /proc/meminfo,cpuinfo and so on through
fuse filesystem.
we mount fuse filesystem for every container.
the mount name is libvirt,mount point is
localstatedir/run/libvirt/lxc/containername.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
When starting an LXC guest with a virNetwork based NIC device,
if the network was not active, the virNetworkPtr device would
be leaked
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When starting a container, newDef is initialized to a
copy of 'def', but when startup fails newDef is never
removed. This cause later attempts to use 'virDomainDefine'
to lose the new data being defined.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A mistaken initialization of 'ret' caused failure to create
macvtap devices to be ignored. The libvirt_lxc process
would later fail to start due to missing devices
Also make sure code checks '< 0' and not '!= 0' since only
-1 is considered an error condition
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the <interface> device did not contain any <target>
element, LXC would crash on a NULL pointer if starting
the container failed
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The LXC driver relies on use of cgroups to kill off LXC processes
in shutdown. If cgroups aren't available, we're unable to kill
off processes, so we must treat lack of cgroups as a fatal startup
error.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The code setting up LXC cgroups used an 'rc' variable both
for capturing the return value of methods it calls, and
its own return status. The result was that several failures
in setting up cgroups would actually result in success being
returned.
Use a separate 'ret' for tracking return value as per normal
code design in other parts of libvirt
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The initpid will be required long term to enable LXC to
implement various hotplug operations. Thus it needs to be
persisted in the domain status XML. LXC has not used the
domain status XML before, so this introduces use of the
helpers.
Currently the lxcContainerSetupMounts method uses the
virSecurityManagerPtr instance to obtain the mount options
string and then only passes the string down into methods
it calls. As functionality in LXC grows though, those
methods need to have direct access to the virSecurityManagerPtr
instance. So push the code down a level.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The impls of virSecurityManagerGetMountOptions had no way to
return errors, since the code was treating 'NULL' as a success
value. This is somewhat pointless, since the calling code did
not want NULL in the first place and has to translate it into
the empty string "". So change the code so that the impls can
return "" directly, allowing use of NULL for error reporting
once again
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When no security driver is specified libvirt_lxc segfaults as a debug
message tries to access security labels for the container that are not
present.
This problem was introduced in commit 6c3cf57d6c.
Early jumps to the cleanup label caused a crash of the libvirt_lxc
container helper as the cleanup section called
virLXCControllerDeleteInterfaces(ctrl) without checking the ctrl argument
for NULL. The argument was de-referenced soon after.
$ /usr/libexec/libvirt_lxc
/usr/libexec/libvirt_lxc: missing --name argument for configuration
Segmentation fault
The virLXCControllerClientCloseHook method was mistakenly
assuming that the private data associated with the network
client was the virLXCControllerPtr. In fact it was just a
dummy int, so we were derefencing a bogus struct. The
frequent result of this was that we would never quit, because
we tried to arm a non-existant timer.
Fix the code by removing the dummy private data and just
using the virLXCControllerPtr instance as private data
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the LXC driver logs audit messages when a container
is started or stopped. These audit messages, however, contain
the PID of the libvirt_lxc supervisor process. To enable
sysadmins to correlate with audit messages generated by
processes /inside/ the container, we need to include the
container init process PID.
We can't do this in the main 'start' audit message, since
the init PID is not available at that point. Instead we output
a completely new audit record, that lists both PIDs.
type=VIRT_CONTROL msg=audit(1353433750.071:363): pid=20180 uid=0 auid=501 ses=3 subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 msg='virt=lxc op=init vm="busy" uuid=dda7b947-0846-1759-2873-0f375df7d7eb vm-pid=20371 init-pid=20372 exe="/home/berrange/src/virt/libvirt/daemon/.libs/lt-libvirtd" hostname=? addr=? terminal=pts/6 res=success'
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The LXC controller code currently directly invokes the
libvirt main loop code. The problem is that this misses
the cleanup of virNetServerClient connections that
virNetServerRun takes care of.
The result is that when libvirtd is stopped, the
libvirt_lxc controller process gets stuck in a I/O loop.
When libvirtd is then started again, it fails to connect
to the controller and thus kills off the entire domain.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
For S390, the default console target type cannot be of type 'serial'.
It is necessary to at least interpret the 'arch' attribute
value of the os/type element to produce the correct default type.
Therefore we need to extend the signature of defaultConsoleTargetType
to account for architecture. As a consequence all the drivers
supporting this capability function must be updated.
Despite the amount of changed files, the only change in behavior is
that for S390 the default console target type will be 'virtio'.
N.B.: A more future-proof approach could be to to use hypervisor
specific capabilities to determine the best possible console type.
For instance one could add an opaque private data pointer to the
virCaps structure (in case of QEMU to hold capsCache) which could
then be passed to the defaultConsoleTargetType callback to determine
the console target type.
Seems to be however a bit overengineered for the use case...
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This needs to be done before the container starts. Turning
off the mknod capability is noticed by systemd, which will
no longer attempt to create device nodes.
This eliminates SELinux AVC messages and ugly failure messages in the journal.
Add two new APIs virNetServerClientNewPostExecRestart and
virNetServerClientPreExecRestart which allow a virNetServerClientPtr
object to be created from a JSON object and saved to a
JSON object, for the purpose of re-exec'ing a process.
This includes serialization of the connected socket associated
with the client
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There was an inverted return value in lxcCgroupControllerActive().
The function assumes cgroups are active and do couple of checks
to prove that. If any of them fails, false is returned. Therefore,
at the end, after all checks are done we must return true, not false.
Many parts of virDomainDefPtr were using 'int' variables as
array length counts. Replace all these with size_t and update
various format strings & API signatures to adapt
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Depending on the scenario in which LXC containers exit, it is
possible for the EOF callback of the LXC monitor to deadlock
the driver.
#0 0x00000038a0a0de4d in __lll_lock_wait () from /lib64/libpthread.so.0
#1 0x00000038a0a09ca6 in _L_lock_840 () from /lib64/libpthread.so.0
#2 0x00000038a0a09ba8 in pthread_mutex_lock () from /lib64/libpthread.so.0
#3 0x00007f4bd9579d55 in virMutexLock (m=<optimized out>) at util/threads-pthread.c:85
#4 0x00007f4bcacc7597 in lxcDriverLock (driver=0x7f4bc40c8290) at lxc/lxc_conf.h:81
#5 virLXCProcessMonitorEOFNotify (mon=<optimized out>, vm=0x7f4bb4000b00) at lxc/lxc_process.c:581
#6 0x00007f4bd9645c91 in virNetClientCloseLocked (client=client@entry=0x7f4bb4009e60)
at rpc/virnetclient.c:554
#7 0x00007f4bd96460f8 in virNetClientIOEventLoopPassTheBuck (thiscall=0x0, client=0x7f4bb4009e60)
at rpc/virnetclient.c:1306
#8 virNetClientIOEventLoopPassTheBuck (client=0x7f4bb4009e60, thiscall=0x0)
at rpc/virnetclient.c:1287
#9 0x00007f4bd96467a2 in virNetClientCloseInternal (reason=3, client=0x7f4bb4009e60)
at rpc/virnetclient.c:589
#10 virNetClientCloseInternal (client=0x7f4bb4009e60, reason=3) at rpc/virnetclient.c:561
#11 0x00007f4bcacc4a82 in virLXCMonitorClose (mon=0x7f4bb4000a00) at lxc/lxc_monitor.c:201
#12 0x00007f4bcacc55ac in virLXCProcessCleanup (reason=<optimized out>, vm=0x7f4bb4000b00,
driver=0x7f4bc40c8290) at lxc/lxc_process.c:240
#13 virLXCProcessStop (driver=0x7f4bc40c8290, vm=vm@entry=0x7f4bb4000b00,
reason=reason@entry=VIR_DOMAIN_SHUTOFF_DESTROYED) at lxc/lxc_process.c:735
#14 0x00007f4bcacc5bd2 in virLXCProcessAutoDestroyDom (payload=<optimized out>,
name=0x7f4bb4003c80, opaque=0x7fff41af2df0) at lxc/lxc_process.c:94
#15 0x00007f4bd9586649 in virHashForEach (table=0x7f4bc409b270,
iter=iter@entry=0x7f4bcacc5ab0 <virLXCProcessAutoDestroyDom>, data=data@entry=0x7fff41af2df0)
at util/virhash.c:514
#16 0x00007f4bcacc52d7 in virLXCProcessAutoDestroyRun (driver=driver@entry=0x7f4bc40c8290,
conn=conn@entry=0x7f4bb8000ab0) at lxc/lxc_process.c:120
#17 0x00007f4bcacca628 in lxcClose (conn=0x7f4bb8000ab0) at lxc/lxc_driver.c:128
#18 0x00007f4bd95e67ab in virReleaseConnect (conn=conn@entry=0x7f4bb8000ab0) at datatypes.c:114
When the driver calls virLXCMonitorClose, there is really no
need for the EOF callback to be invoked in this case, since
the caller can easily handle events itself. In changing this,
the monitor needs to take a deep copy of the callback list,
not merely a reference.
Also adds debug statements in various places to aid
troubleshooting
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Asynchronously setting priv->mon to NULL was pointless,
just remove the destroy callback entirely.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Continue consolidation of process functions by moving some
helpers out of command.{c,h} into virprocess.{c,h}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Some kernel versions (at least RHEL-6 2.6.32) do not let you over-mount
an existing selinuxfs instance with a new one. Thus we must unmount the
existing instance inside our namespace.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
The introduction of /sys/fs/cgroup came in fairly recent kernels.
Prior to that time distros would pick a custom directory like
/cgroup or /dev/cgroup. We need to auto-detect where this is,
rather than hardcoding it
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This bug was revealed by the crash described in
https://bugzilla.redhat.com/show_bug.cgi?id=852383
The vlan info pointer sent to virNetDevOpenvswitchAddPort should never
be non-NULL unless there is at least one tag. The factthat such a vlan
info pointer was receveid pointed out that a caller was passing the
wrong pointer. Instead of sending &net->vlan, the result of
virDomainNetGetActualVlan(net) should be sent - that function will
look for vlan info in net->data.network.actual->vlan, and in cany case
return NULL instead of a pointer if the vlan info it finds has no
tags.
Aside from causing the crash, sending a hardcoded &net->vlan has the
effect of ignoring vlan info from a <network> or <portgroup> config.
This patch updates the structures that store information about each
domain and each hypervisor to support multiple security labels and
drivers. It also updates all the remaining code to use the new fields.
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Add the ability to support VLAN tags for Open vSwitch virtual port
types. To accomplish this, modify virNetDevOpenvswitchAddPort and
virNetDevTapCreateInBridgePort to take a virNetDevVlanPtr
argument. When adding the port to the OVS bridge, setup either a
single VLAN or a trunk port based on the configuration from the
virNetDevVlanPtr.
Signed-off-by: Kyle Mestery <kmestery@cisco.com>
Currently there is a hook function that is invoked when a
new client connection comes in, which allows an app to
setup private data. This setup will make it difficult to
serialize client state during process re-exec(). Change to
a model where the app registers a callback when creating
the virNetServerPtr instance, which is used to allocate
the client private data immediately during virNetClientPtr
construction.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the virNetClientPtr constructor will always register
the async IO event handler and the keepalive objects. In the
case of the lock manager, there will be no event loop available
nor keepalive support required. Split this setup out of the
constructor and into separate methods.
The remote driver will enable async IO and keepalives, while
the LXC driver will only enable async IO
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As the consensus in:
https://www.redhat.com/archives/libvir-list/2012-July/msg01692.html,
this patch is to destroy conf/virdomainlist.[ch], folding the
helpers into conf/domain_conf.[ch].
* src/Makefile.am:
- Various indention fixes incidentally
- Add macro DATATYPES_SOURCES (datatypes.[ch])
- Link datatypes.[ch] for libvirt_lxc
* src/conf/domain_conf.c:
- Move all the stuffs from virdomainlist.c into it
- Use virUnrefDomain and virUnrefDomainSnapshot instead of
virDomainFree and virDomainSnapshotFree, which are defined
in libvirt.c, and we don't want to link to it.
- Remove "if" before "free" the object, as virObjectUnref
is in the list "useless_free_options".
* src/conf/domain_conf.h:
- Move all the stuffs from virdomainlist.h into it
- s/LIST_FILTER/LIST_DOMAINS_FILTER/
* src/libxl/libxl_driver.c:
- s/LIST_FILTER/LIST_DOMAINS_FILTER/
- no (include "virdomainlist.h")
* src/libxl/libxl_driver.c: Likewise
* src/lxc/lxc_driver.c: Likewise
* src/openvz/openvz_driver.c: Likewise
* src/parallels/parallels_driver.c: Likewise
* src/qemu/qemu_driver.c: Likewise
* src/test/test_driver.c: Likewise
* src/uml/uml_driver.c: Likewise
* src/vbox/vbox_tmpl.c: Likewise
* src/vmware/vmware_driver.c: Likewise
* tools/virsh-domain-monitor.c: Likewise
* tools/virsh.c: Likewise
The meat of this patch is just moving the calls to
virNWFilterRegisterCallbackDriver from each hypervisor's "register"
function into its "initialize" function. The rest is just code
movement to allow that, and a new virNWFilterUnRegisterCallbackDriver
function to undo what the register function does.
The long explanation:
There is an array in nwfilter called callbackDrvArray that has
pointers to a table of functions for each hypervisor driver that are
called by nwfilter. One of those function pointers is to a function
that will lock the hypervisor driver. Entries are added to the table
by calling each driver's "register" function, which happens quite
early in libvirtd's startup.
Sometime later, each driver's "initialize" function is called. This
function allocates a driver object and stores a pointer to it in a
static variable that was previously initialized to NULL. (and here's
the important part...) If the "initialize" function fails, the driver
object is freed, and that pointer set back to NULL (but the entry in
nwfilter's callbackDrvArray is still there).
When the "lock the driver" function mentioned above is called, it
assumes that the driver was successfully loaded, so it blindly tries
to call virMutexLock on "driver->lock".
BUT, if the initialize never happened, or if it failed, "driver" is
NULL. And it just happens that "lock" is always the first field in
driver so it is also NULL.
Boom.
To fix this, the call to virNWFilterRegisterCallbackDriver for each
driver shouldn't be called until the end of its (*already guaranteed
successful*) "initialize" function, not during its "register" function
(which is currently the case). This implies that there should also be
a virNWFilterUnregisterCallbackDriver() function that is called in a
driver's "shutdown" function (although in practice, that function is
currently never called).
Switch virDomainObjPtr to use the virObject APIs for reference
counting. The main change is that virObjectUnref does not return
the reference count, merely a bool indicating whether the object
still has any refs left. Checking the return value is also not
mandatory.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
All callers used the same initialization seed (well, the new
viratomictest forgot to look at getpid()); so we might as well
make this value automatic. And while it may feel like we are
giving up functionality, I documented how to get it back in the
unlikely case that you actually need to debug with a fixed
pseudo-random sequence. I left that crippled by default, so
that a stray environment variable doesn't cause a lack of
randomness to become a security issue.
* src/util/virrandom.c (virRandomInitialize): Rename...
(virRandomOnceInit): ...and make static, with one-shot call.
Document how to do fixed-seed debugging.
* src/util/virrandom.h (virRandomInitialize): Drop prototype.
* src/libvirt_private.syms (virrandom.h): Don't export it.
* src/libvirt.c (virInitialize): Adjust caller.
* src/lxc/lxc_controller.c (main): Likewise.
* src/security/virt-aa-helper.c (main): Likewise.
* src/util/iohelper.c (main): Likewise.
* tests/seclabeltest.c (main): Likewise.
* tests/testutils.c (virtTestMain): Likewise.
* tests/viratomictest.c (mymain): Likewise.
Otherwise, a build may fail with:
lxc/lxc_conatiner.c: In function 'lxcContainerDropCapabilities':
lxc/lxc_container.c:1662:46: error: unused parameter 'keepReboot' [-Werror=unused-parameter]
* src/lxc/lxc_container.c (lxcContainerDropCapabilities): Mark
parameter unused.
If an LXC container is using a virtual network and that network
is not active, currently the user gets a rather unhelpful
error message about tap device setup failure. Add an explicit
check for whether the network is active, in exactly the same
way as the QEMU driver
The reboot() syscall is allowed by new kernels for LXC containers.
The LXC controller can detect whether a reboot was requested
(instead of a normal shutdown) by looking at the "init" process
exit status. If a reboot was triggered, the exit status will
record SIGHUP as the kill reason.
The LXC controller has cleared all its capabilities, and the
veth network devices will no longer exist at this time. Thus
it cannot restart the container init process itself. Instead
it emits an event which is picked up by the LXC driver in
libvirtd. This will then re-create the container, using the
same configuration as it was previously running with (ie it
will not activate 'newDef').
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Check whether the reboot() system call is virtualized, and if
it is, then allow the container to keep CAP_SYS_REBOOT.
Based on an original patch by Serge Hallyn
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This defines a new RPC protocol to be used between the LXC
controller and the libvirtd LXC driver. There is only a
single RPC message defined thus far, an asynchronous "EXIT"
event that is emitted just before the LXC controller process
exits. This provides the LXC driver with details about how
the container shutdown - normally, or abnormally (crashed),
thus allowing the driver to emit better libvirt events.
Emitting the event in the LXC controller requires a few
little tricks with the RPC service. Simply calling the
virNetServiceClientSendMessage does not work, since this
merely queues the message for asynchronous processing.
In addition the main event loop is no longer running at
the point the event is emitted, so no I/O is processed.
Thus after invoking virNetServiceClientSendMessage it is
necessary to mark the client as being in "delayed close"
mode. Then the event loop is run again, until the client
completes its close - this happens only after the queued
message has been fully transmitted. The final complexity
is that it is not safe to run virNetServerQuit() from the
client close callback, since that is invoked from a
context where the server is locked. Thus a zero-second
timer is used to trigger shutdown of the event loop,
causing the controller to finally exit.
* src/Makefile.am: Add rules for generating RPC protocol
files and dispatch methods
* src/lxc/lxc_controller.c: Emit an RPC event immediately
before exiting
* src/lxc/lxc_domain.h: Record the shutdown reason
given by the controller
* src/lxc/lxc_monitor.c, src/lxc/lxc_monitor.h: Register
RPC program and event handler. Add callback to let
driver receive EXIT event.
* src/lxc/lxc_process.c: Use monitor exit event to decide
what kind of domain event to emit
* src/lxc/lxc_protocol.x: Define wire protocol for LXC
controller monitor.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the code that handles the LXC monitor out of the
lxc_process.c file and into lxc_monitor.{c,h}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update the LXC driver to use the virNetClient APIs for
connecting to the libvirt_lxc monitor, instead of the
low-level socket APIs. This is a step towards running
a full RPC protocol with libvirt_lxc
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Rename the lxc_driver_t struct typedef to virLXCDriver to more
closely follow normal libvirt naming conventions
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
For consistency all the APIs in the lxc_domain.c file should
have a virLXCDomain prefix in their name
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
For consistency all the APIs in the lxc_process.c file should
have a virLXCProcess prefix in their name
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Any time we have a string with no % passed through gettext, a
translator can inject a % to cause a stack overread. When there
is nothing to format, it's easier to ask for a string that cannot
be used as a formatter, by using a trivial "%s" format instead.
In the past, we have used --disable-nls to catch some of the
offenders, but that doesn't get run very often, and many more
uses have crept in. Syntax check to the rescue!
The syntax check can catch uses such as
virReportError(code,
_("split "
"string"));
by using a sed script to fold context lines into one pattern
space before checking for a string without %.
This patch is just mechanical insertion of %s; there are probably
several messages touched by this patch where we would be better
off giving the user more information than a fixed string.
* cfg.mk (sc_prohibit_diagnostic_without_format): New rule.
* src/datatypes.c (virUnrefConnect, virGetDomain)
(virUnrefDomain, virGetNetwork, virUnrefNetwork, virGetInterface)
(virUnrefInterface, virGetStoragePool, virUnrefStoragePool)
(virGetStorageVol, virUnrefStorageVol, virGetNodeDevice)
(virGetSecret, virUnrefSecret, virGetNWFilter, virUnrefNWFilter)
(virGetDomainSnapshot, virUnrefDomainSnapshot): Add %s wrapper.
* src/lxc/lxc_driver.c (lxcDomainSetBlkioParameters)
(lxcDomainGetBlkioParameters): Likewise.
* src/conf/domain_conf.c (virSecurityDeviceLabelDefParseXML)
(virDomainDiskDefParseXML, virDomainGraphicsDefParseXML):
Likewise.
* src/conf/network_conf.c (virNetworkDNSHostsDefParseXML)
(virNetworkDefParseXML): Likewise.
* src/conf/nwfilter_conf.c (virNWFilterIsValidChainName):
Likewise.
* src/conf/nwfilter_params.c (virNWFilterVarValueCreateSimple)
(virNWFilterVarAccessParse): Likewise.
* src/libvirt.c (virDomainSave, virDomainSaveFlags)
(virDomainRestore, virDomainRestoreFlags)
(virDomainSaveImageGetXMLDesc, virDomainSaveImageDefineXML)
(virDomainCoreDump, virDomainGetXMLDesc)
(virDomainMigrateVersion1, virDomainMigrateVersion2)
(virDomainMigrateVersion3, virDomainMigrate, virDomainMigrate2)
(virStreamSendAll, virStreamRecvAll)
(virDomainSnapshotGetXMLDesc): Likewise.
* src/nwfilter/nwfilter_dhcpsnoop.c (virNWFilterSnoopReqLeaseDel)
(virNWFilterDHCPSnoopReq): Likewise.
* src/openvz/openvz_driver.c (openvzUpdateDevice): Likewise.
* src/openvz/openvz_util.c (openvzKBPerPages): Likewise.
* src/qemu/qemu_cgroup.c (qemuSetupCgroup): Likewise.
* src/qemu/qemu_command.c (qemuBuildHubDevStr, qemuBuildChrChardevStr)
(qemuBuildCommandLine): Likewise.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Likewise.
* src/rpc/virnetsaslcontext.c (virNetSASLSessionGetIdentity):
Likewise.
* src/rpc/virnetsocket.c (virNetSocketNewConnectUNIX)
(virNetSocketSendFD, virNetSocketRecvFD): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskBuildPool): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemProbe)
(virStorageBackendFileSystemBuild): Likewise.
* src/storage/storage_backend_rbd.c
(virStorageBackendRBDOpenRADOSConn): Likewise.
* src/storage/storage_driver.c (storageVolumeResize): Likewise.
* src/test/test_driver.c (testInterfaceChangeBegin)
(testInterfaceChangeCommit, testInterfaceChangeRollback):
Likewise.
* src/vbox/vbox_tmpl.c (vboxListAllDomains): Likewise.
* src/xenxs/xen_sxpr.c (xenFormatSxprDisk, xenFormatSxpr):
Likewise.
* src/xenxs/xen_xm.c (xenXMConfigGetUUID, xenFormatXMDisk)
(xenFormatXM): Likewise.
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)
You should have received a copy of the GNU General Public License
along with Foobar. If not, see <http://www.gnu.org/licenses/>.
This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').
Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:
src/security/security_selinux.h
src/security/security_driver.h
src/security/security_selinux.c
src/security/security_apparmor.h
src/security/security_apparmor.c
src/security/security_driver.c
The 'lxc_driver' global variable is now used from several of
the LXC sources files. Thus it needs to be non-static to
avoid runtime linkage errors
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Move all the code that manages stop/start of LXC processes
into separate lxc_process.{c,h} file to make the lxc_driver.c
file smaller
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the cgroup setup code out of the lxc_controller.c file
and into lxc_cgroup.{c,h}. This reduces the size of the
lxc_controller.c file and paves the way to invoke cgroup
setup from lxc_driver.c instead of lxc_controller.c in the
future
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the LXC driver code related to the virDomainObjPtr
private data into separate lxc_domain.{c,h} files
to reduce the size of lxc_driver.c
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When sending SIGHUP to libvirtd, it will trigger the virStateDriver
reload operation. This is intended to reload the configuration files
for guests. For unknown historical reasons this is also triggering
autostart of all guests. Autostart is generally expected to be
something that happens on OS startup. Starting VMs on SIGHUP will
violate that expectation and potentially cause dangerous scenarios
if the admin has explicitly shutdown a misbehaving VM that has
been marked as autostart
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Basically within a Secure Linux Container (virt-sandbox) we want all content
that the process within the container can write to be labeled the same. We
are labeling the physical disk correctly but when we create "RAM" based file
systems
libvirt is not labeling them, and they are defaulting to tmpfs_t, which will
will not allow the processes to write. This patch labels the RAM based file
systems correctly.
Introduce new members in the virMacAddr 'class'
- virMacAddrSet: set virMacAddr from a virMacAddr
- virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer
- virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer
- virMacAddrCmp: comparing two virMacAddr
- virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer
then replace raw MAC addresses by replacing
- 'unsigned char *' with virMacAddrPtr
- 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr
and introduce usage of above functions where necessary.
Since we are not yet using the virNetServerPtr object for running
the event loop, we can't use virNetServerQuit(). Instead set the
global 'quit' flag in libvirt_lxc
The only useful translation of "%s" as a format string is "%s" (I
suppose you could claim "%1$s" is also valid, but why bother). So
it is not worth translating; fixing this exposes some instances
where we were failing to translate real error messages. This makes
the fix of commit 097da1ab more generic, as well as ensuring no
future regressions.
* cfg.mk (sc_prohibit_useless_translation): New rule.
* src/lxc/lxc_driver.c (lxcSetVcpuBWLive): Fix offender.
* src/openvz/openvz_conf.c (openvzReadFSConf): Likewise.
* src/qemu/qemu_cgroup.c (qemuSetupCgroupForVcpu): Likewise.
* src/qemu/qemu_driver.c (qemuSetVcpusBWLive): Likewise.
* src/xenapi/xenapi_utils.c (xenapiSessionErrorHandle): Likewise.
Previous commits added code to unmount the existing /proc,
/sys and /dev hierarchies on the root filesystem of the
container. This should only have been done if the container's
root filesystem was the same as the host's root. ie if
the root source is '/'. As it is, this causes LXC containersr
to fail to start if their root source is not '/'
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In preparation for introducing a full RPC protocol for
libvirt_lxc, switch over to using the virNetServer APIs
for the monitor connection
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
While it is not currently used elsewhere in libvirt, the code
for finding a free loop device & associating a file with it
is not LXC specific. Move it into the viffile.{c,h} file where
potentially shared code is more commonly kept.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the cgroup object into virLXCControllerPtr and rename
all the setup methods to include 'Cgroup' in their name
if appropriate
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the monitor FDs into the virLXCControllerPtr object
removing the need for the 'struct lxcMonitor' object
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virLXCControllerRun method is getting a little too large,
and about 50% of its code is related to setting up a /dev/pts
mount. Move the latter out into a dedicated method
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the security manager object into the virLXCControllerPtr
object. Also simplify the code creating it in the first place
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the list of loop device FDs into the virLXCControllerPtr
object and make sure that virLXCControllerStopInit will
close them all
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Turn 'struct lxc_console' into virLXCControllerConsolePtr and make it
a part of virLXCControllerPtr
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Keep a record of the init PID in the virLXCController object
and create a virLXCControllerStopInit method for killing this
process
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the veth device name state into the virLXCControllerPtr
object and stop passing it around. Also use size_t instead
of unsigned int for the array length parameters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The LXC controller code is having to pass around an ever increasing
number of parameters between methods. To make the code more managable
introduce a virLXCControllerPtr to hold all this state, starting with
the container name and virDomainDefPtr object
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since we are mounting a new /dev in the container, we must
remove any sub-mounts like /dev/shm, /dev/mqueue, etc,
otherwise they'll be recorded in /proc/mounts, but not be
accessible to applications.
Currently libvirt-lxc checks to see if the destination exists and is a
directory. If it is not a directory then the mount fails. Since
libvirt-lxc can bind mount files on an inode, this patch is needed to
allow us to bind mount files on files. Currently we want to bind mount
on top of /etc/machine-id, and /etc/adjtime
If the destination of the mount point does not exists, it checks if the
src is a directory and then attempts to create a directory, otherwise it
creates an empty file for the destination. The code will then bind mount
over the destination.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently you can configure LXC to bind a host directory to
a guest directory, but not to bind a guest directory to a
guest directory. While the guest container init could do
this itself, allowing it in the libvirt XML means a stricter
SELinux policy can be written
Introduce a new syntax for filesystems to allow use of a RAM
filesystem
<filesystem type='ram'>
<source usage='10' units='MiB'/>
<target dir='/mnt'/>
</filesystem>
The usage units default to KiB to limit consumption of host memory.
* docs/formatdomain.html.in: Document new syntax
* docs/schemas/domaincommon.rng: Add new attributes
* src/conf/domain_conf.c: Parsing/formatting of RAM filesystems
* src/lxc/lxc_container.c: Mounting of RAM filesystems
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The lxc contoller eventually makes use of virRandomBits(), which was
segfaulting since virRandomInitialize() is never invoked.
Program received signal SIGSEGV, Segmentation fault.
0x00007ffff554d560 in random_r () from /lib64/libc.so.6
(gdb) bt
0 0x00007ffff554d560 in random_r () from /lib64/libc.so.6
1 0x0000000000469eaa in virRandomBits (nbits=32) at util/virrandom.c:80
2 0x000000000045bf69 in virHashCreateFull (size=256,
dataFree=0x4aa2a2 <hashDataFree>, keyCode=0x45bd40 <virHashStrCode>,
keyEqual=0x45bdad <virHashStrEqual>, keyCopy=0x45bdfa <virHashStrCopy>,
keyFree=0x45be37 <virHashStrFree>) at util/virhash.c:134
3 0x000000000045c069 in virHashCreate (size=0, dataFree=0x4aa2a2 <hashDataFree>)
at util/virhash.c:164
4 0x00000000004aa562 in virNWFilterHashTableCreate (n=0)
at conf/nwfilter_params.c:686
5 0x00000000004aa95b in virNWFilterParseParamAttributes (cur=0x711d30)
at conf/nwfilter_params.c:793
6 0x0000000000481a7f in virDomainNetDefParseXML (caps=0x702c90, node=0x7116b0,
ctxt=0x7101b0, bootMap=0x0, flags=0) at conf/domain_conf.c:4589
7 0x000000000048cc36 in virDomainDefParseXML (caps=0x702c90, xml=0x710040,
root=0x7103b0, ctxt=0x7101b0, expectedVirtTypes=16, flags=0)
at conf/domain_conf.c:8658
8 0x000000000048f011 in virDomainDefParseNode (caps=0x702c90, xml=0x710040,
root=0x7103b0, expectedVirtTypes=16, flags=0) at conf/domain_conf.c:9360
9 0x000000000048ee30 in virDomainDefParse (xmlStr=0x0,
filename=0x702ae0 "/var/run/libvirt/lxc/x.xml", caps=0x702c90,
expectedVirtTypes=16, flags=0) at conf/domain_conf.c:9310
10 0x000000000048ef00 in virDomainDefParseFile (caps=0x702c90,
filename=0x702ae0 "/var/run/libvirt/lxc/x.xml", expectedVirtTypes=16, flags=0)
at conf/domain_conf.c:9332
11 0x0000000000425053 in main (argc=5, argv=0x7fffffffe2b8)
at lxc/lxc_controller.c:1773
This patch adds support for listing all domains into drivers that use
the common virDomainObj implementation: libxl, lxc, openvz, qemu, test,
uml, vmware.
For drivers that don't support managed save images the guests are
treated as if they had none, so filtering guests that do have such an
image on this driver succeeds and produces 0 results.
when lxcContainerIdentifyCGroups failed, the memory it allocated
has been freed, so we should not free this memory again in
lxcContainerSetupPivortRoot and lxcContainerSetupExtraMounts.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
when libvirt_lxc trigger oom error in lxcContainerGetSubtree
we should free the alloced memory for mounts.
so when lxcContainerGetSubtree failed,we should do some
memory cleanup in lxcContainerUnmountSubtree.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
we alloc the memory for format in lxcContainerMountDetectFilesystem
but without free it in lxcContainerMountFSBlockHelper.
this patch just call VIR_FREE to free it.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
This reverts
commit c16b4c43fc
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Fri May 11 15:09:27 2012 +0100
Avoid LXC pivot root in the root source is still /
This commit broke setup of /dev, because the code which
deals with setting up a private /dev and /dev/pts only
works if you do a pivotroot.
The original intent of avoiding the pivot root was to
try and ensure the new root has a minimumal mount
tree. The better way todo this is to just unmount the
bits we don't want (ie old /proc & /sys subtrees.
So apply the logic from
commit c529b47a75
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Fri May 11 11:35:28 2012 +0100
Trim /proc & /sys subtrees before mounting new instances
to the pivot_root codepath as well
A core use case of the hook scripts is to be able to do things
to a guest's network configuration. It is possible to hook into
the 'start' operation for a QEMU guest which runs just before
the guest is started. The TAP devices will exist at this point,
but the QEMU process will not. It can be desirable to have a
'started' hook too, which runs once QEMU has started.
If libvirtd is restarted it will re-populate firewall rules,
but there is no QEMU hook to trigger for existing domains.
This is solved with a 'reconnect' hook.
Finally, if attaching to an external QEMU process there needs
to be an 'attach' hook script.
This all also applies to the LXC driver
* docs/hooks.html.in: Document new operations
* src/util/hooks.c, src/util/hooks.c: Add 'started', 'reconnect'
and 'attach' operations for QEMU. Add 'prepare', 'started',
'release' and 'reconnect' operations for LXC
* src/lxc/lxc_driver.c: Add hooks for 'prepare', 'started',
'release' and 'reconnect' operations
* src/qemu/qemu_process.c: Add hooks for 'started', 'reconnect'
and 'reconnect' operations
when do remount,the source and target should be the same
values specified in the initial mount() call.
So change fs->dst to src.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
When getting number of CPUs the host has assigned, there was always
number "1" returned. Even though all lxc domains with no pinning
launched by libvirt run on all pCPUs (by default, no matter what's the
number), we should at least return the same number as the user
specified when creating the domain.
When adding new config file parameters, the corresponding
additions to the augeas lens' are constantly forgotten.
Also there are augeas test cases, these don't catch the
error, since they too are never updated.
To address this, the augeas test cases need to be auto-generated
from the example config files.
* build-aux/augeas-gentest.pl: Helper to generate an
augeas test file, substituting in elements from the
example config files
* src/Makefile.am, daemon/Makefile.am: Switch to
auto-generated augeas test cases
* daemon/test_libvirtd.aug, daemon/test_libvirtd.aug.in,
src/locking/test_libvirt_sanlock.aug,
src/locking/test_libvirt_sanlock.aug.in,
src/lxc/test_libvirtd_lxc.aug,
src/lxc/test_libvirtd_lxc.aug.in,
src/qemu/test_libvirtd_qemu.aug,
src/qemu/test_libvirtd_qemu.aug.in: Remove example
config file data, replacing with a ::CONFIG:: placeholder
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of doing
# example_config
use
#example_config
so it is possible to programatically uncomment example config
options, as distinct from their comment/descriptions
Also delete rogue trailing comma not allowed by lens
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When the last reference to a virConnectPtr is released by
libvirtd, it was possible for a deadlock to occur in the
virDomainEventState functions. The virDomainEventStatePtr
holds a reference on virConnectPtr for each registered
callback. When removing a callback, the virUnrefConnect
function is run. If this causes the last reference on the
virConnectPtr to be released, then virReleaseConnect can
be run, which in turns calls qemudClose. This function has
a call to virDomainEventStateDeregisterConn which is intended
to remove all callbacks associated with the virConnectPtr
instance. This will try to grab a lock on virDomainEventState
but this lock is already held. Deadlock ensues
Thread 1 (Thread 0x7fcbb526a840 (LWP 23185)):
Since each callback associated with a virConnectPtr holds a
reference on virConnectPtr, it is impossible for the qemudClose
method to be invoked while any callbacks are still registered.
Thus the call to virDomainEventStateDeregisterConn must in fact
be a no-op. Thus it is possible to just remove all trace of
virDomainEventStateDeregisterConn and avoid the deadlock.
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Delete virDomainEventStateDeregisterConn
* src/libxl/libxl_driver.c, src/lxc/lxc_driver.c,
src/qemu/qemu_driver.c, src/uml/uml_driver.c: Remove
calls to virDomainEventStateDeregisterConn
Normal practice is for cgroups controllers to be mounted at
/sys/fs/cgroup. When setting up a container, /sys is mounted
with a new sysfs instance, thus we must re-mount all the
cgroups controllers. The complexity is that we must mount
them in the same layout as the host OS. ie if 'cpu' and 'cpuacct'
were mounted at the same location in the host we must preserve
this in the container. Also if any controllers are co-located
we must setup symlinks from the individual controller name to
the co-located mount-point
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Both /proc and /sys may have sub-mounts in them from the host
OS. We must explicitly unmount them all before mounting the
new instance over that location. If we don't then /proc/mounts
will show the sub-mounts as existing, even though nothing will
be able to access them, due to the over-mount.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the LXC config has a filesystem
<filesystem>
<source dir='/'/>
<target dir='/'/>
</filesystem>
then there is no need to go down the pivot root codepath.
We can simply use the existing root as needed.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently to make sysfs readonly, we remount the existing
instance and then bind it readonly. Unfortunately this means
sysfs is still showing device objects wrt the host OS namespace.
We need it to reflect the container namespace, so we must mount
a completely new instance of it. Do the same for selinuxfs since
there is no benefit to bind mounting & this lets us simplify
the code.
* src/lxc/lxc_container.c: Mount fresh sysfs instance
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of hardcoding use of SELinux contexts in the LXC driver,
switch over to using the official security driver API.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To allow the security drivers to apply different configuration
information per hypervisor, pass the virtualization driver name
into the security manager constructor.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Once lxcContainerSetStdio is invoked, logging will not work as
expected in libvirt_lxc. So make sure this is the last thing to
be called, in particular after setting the security process label
The virLogSetFromEnv call was done too late in startup to
catch many log messages (eg from security driver initialization).
To assist debugging also explicitly log the security details
at startup
The driver->securityDriverName field may be NULL, if automatic
probing is used to determine security driver. This meant that
unless selinux was explicitly requested in lxc.conf, it was
not being sent to the libvirt_lxc process.
The driver->securityManager field is guaranteed non-NULL, since
there will always be the 'none' security driver present if
nothing else exists. So use that to set the driver name for
libvirt_lxc
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the libvirt_lxc process uses VIR_DOMAIN_XML_INACTIVE
when loading the XML for the container. This means it loses
any dynamic data such as the, just allocated, SELinux label.
Further there is an inconsistency in the libvirt LXC driver
whereby it saves the live config XML and then later overwrites
the file with the live status XML instead. Add a comment about
this for future reference.
* src/lxc/lxc_controller.c: Remove VIR_DOMAIN_XML_INACTIVE
when loading XML
* src/lxc/lxc_driver.c: Add comment about inconsistent
config file formats
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Error: UNINIT:
/libvirt/src/lxc/lxc_driver.c:1412:
var_decl: Declaring variable "fd" without initializer.
/libvirt/src/lxc/lxc_driver.c:1460:
uninit_use_in_call: Using uninitialized value "fd" when calling "virFileClose".
/libvirt/src/util/virfile.c:50:
read_parm: Reading a parameter value.
Error: DEADCODE:
/libvirt/src/lxc/lxc_controller.c:960:
dead_error_condition: On this path, the condition "ret == 4" cannot be true.
/libvirt/src/lxc/lxc_controller.c:959:
at_most: After this line, the value of "ret" is at most -1.
/libvirt/src/lxc/lxc_controller.c:959:
new_values: Noticing condition "ret < 0".
/libvirt/src/lxc/lxc_controller.c:961:
dead_error_line: Execution cannot reach this statement "continue;".
Error: UNINIT:
/libvirt/src/lxc/lxc_controller.c:1104:
var_decl: Declaring variable "consoles" without initializer.
/libvirt/src/lxc/lxc_controller.c:1237:
uninit_use: Using uninitialized value "consoles".
The code is splattered with a mix of
sizeof foo
sizeof (foo)
sizeof(foo)
Standardize on sizeof(foo) and add a syntax check rule to
enforce it
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Pass argv to the init binary of LXC, using a new <initarg> element.
* docs/formatdomain.html.in: Document <os> usage for containers
* docs/schemas/domaincommon.rng: Add <initarg> element
* src/conf/domain_conf.c, src/conf/domain_conf.h: parsing and
formatting of <initarg>
* src/lxc/lxc_container.c: Setup LXC argv
* tests/Makefile.am, tests/lxcxml2xmldata/lxc-systemd.xml,
tests/lxcxml2xmltest.c, tests/testutilslxc.c,
tests/testutilslxc.h: Test parsing/formatting of LXC related
XML parts
The SELinux mount point moved from /selinux to /sys/fs/selinux
when systemd came along.
* configure.ac: Probe for SELinux mount point
* src/lxc/lxc_container.c: Use SELinux mount point determined
by configure.ac
Return statements with parameter enclosed in parentheses were modified
and parentheses were removed. The whole change was scripted, here is how:
List of files was obtained using this command:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$'
Found files were modified with this command:
sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
Then checked for nonsense.
The whole command looks like this:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$' | xargs sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
If no <interface> elements are included in an LXC guest XML
description, then the LXC guest will just see the host's
network interfaces. It is desirable to be able to hide the
host interfaces, without having to define any guest interfaces.
This patch introduces a new feature flag <privnet/> to allow
forcing of a private network namespace for LXC. In the future
I also anticipate that we will add <privuser/> to force a
private user ID namespace.
* src/conf/domain_conf.c, src/conf/domain_conf.h: Add support
for <privnet/> feature. Auto-set <privnet> if any <interface>
devices are defined
* src/lxc/lxc_container.c: Honour request for private network
namespace
This patch will allow OpenFlow controllers to identify which interface
belongs to a particular VM by using the Domain UUID.
ovs-vsctl get Interface vnet0 external_ids
{attached-mac="52:54:00:8C:55:2C", iface-id="83ce45d6-3639-096e-ab3c-21f66a05f7fa", iface-status=active, vm-id="142a90a7-0acc-ab92-511c-586f12da8851"}
V2 changes:
Replaced vm-uuid with vm-id. There was a discussion in Open vSwitch
mailinglist that we should stick with the same DB key postfixes for the
sake of consistency (e.g iface-id, vm-id ...).
On 64-bit platforms, unsigned long and unsigned long long are
identical, so we don't have to worry about overflow checks.
On 32-bit platforms, anywhere we narrow unsigned long long back
to unsigned long, we have to worry about overflow; it's easier
to do this in one place by having most of the code use the same
or wider types, and only doing the narrowing at the last minute.
Therefore, the memory set commands remain unsigned long, and
the memory get command now centralizes the overflow check into
libvirt.c, so that drivers don't have to repeat the work.
This also fixes a bug where xen returned the wrong value on
failure (most APIs return -1 on failure, but getMaxMemory
must return 0 on failure).
* src/driver.h (virDrvDomainGetMaxMemory): Use long long.
* src/libvirt.c (virDomainGetMaxMemory): Raise overflow.
* src/test/test_driver.c (testGetMaxMemory): Fix driver.
* src/rpc/gendispatch.pl (name_to_ProcName): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorGetMaxMemory): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainGetMaxMemory): Likewise.
* src/xen/xend_internal.c (xenDaemonDomainGetMaxMemory):
Likewise.
* src/xen/xend_internal.h (xenDaemonDomainGetMaxMemory):
Likewise.
* src/xen/xm_internal.c (xenXMDomainGetMaxMemory): Likewise.
* src/xen/xm_internal.h (xenXMDomainGetMaxMemory): Likewise.
* src/xen/xs_internal.c (xenStoreDomainGetMaxMemory): Likewise.
* src/xen/xs_internal.h (xenStoreDomainGetMaxMemory): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainGetMaxMemory):
Likewise.
* src/esx/esx_driver.c (esxDomainGetMaxMemory): Likewise.
* src/libxl/libxl_driver.c (libxlDomainGetMaxMemory): Likewise.
* src/qemu/qemu_driver.c (qemudDomainGetMaxMemory): Likewise.
* src/lxc/lxc_driver.c (lxcDomainGetMaxMemory): Likewise.
* src/uml/uml_driver.c (umlDomainGetMaxMemory): Likewise.
Function xmlParseURI does not remove square brackets around IPv6
address when parsing. One of the solutions is making wrappers around
functions working with xmlURI*. This assures that uri->server will be
always properly assigned and it doesn't have to be changed when used
on some new place in the code.
For this purpose, functions virParseURI and virSaveURI were
added. These function are wrappers around xmlParseURI and xmlSaveUri
respectively.
Also there is one new syntax check function to prohibit these functions
anywhere else.
File changes:
- src/util/viruri.h -- declaration
- src/util/viruri.c -- definition
- src/libvirt_private.syms -- symbol export
- src/Makefile.am -- added source and header files
- cfg.mk -- added sc_prohibit_xmlURI
- all others -- ID name and include fixes
This patch allows libvirt to add interfaces to already
existing Open vSwitch bridges. The following syntax in
domain XML file can be used:
<interface type='bridge'>
<mac address='52:54:00:d0:3f:f2'/>
<source bridge='ovsbr'/>
<virtualport type='openvswitch'>
<parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'/>
</virtualport>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x03' function='0x0'/>
</interface>
or if libvirt should auto-generate the interfaceid use
following syntax:
<interface type='bridge'>
<mac address='52:54:00:d0:3f:f2'/>
<source bridge='ovsbr'/>
<virtualport type='openvswitch'>
</virtualport>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x03' function='0x0'/>
</interface>
It is also possible to pass an optional profileid. To do that
use following syntax:
<interface type='bridge'>
<source bridge='ovsbr'/>
<mac address='00:55:1a:65:a2:8d'/>
<virtualport type='openvswitch'>
<parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'
profileid='test-profile'/>
</virtualport>
</interface>
To create Open vSwitch bridge install Open vSwitch and
run the following command:
ovs-vsctl add-br ovsbr
This patch fixes the access of variable "con" in two files where the
variable was declared only on SELinux builds and thus the build failed
without SELinux. It's a rather nasty fix but helps fix the build
quickly and without any major changes to the code.
To allow the container to access /dev and /dev/pts when under
sVirt, set an explicit mount option. Also set a max size on
the /dev mount to prevent DOS on memory usage
* src/lxc/lxc_container.c: Set /dev mount context
* src/lxc/lxc_controller.c: Set /dev/pts mount context
For the sake of backwards compat, LXC guests are *not*
confined by default. This is because it is not practical
to dynamically relabel containers using large filesystem
trees. Applications can create confined containers though,
by giving suitable XML configs
* src/Makefile.am: Link libvirt_lxc to security drivers
* src/lxc/libvirtd_lxc.aug, src/lxc/lxc_conf.h,
src/lxc/lxc_conf.c, src/lxc/lxc.conf,
src/lxc/test_libvirtd_lxc.aug: Config file handling for
security driver
* src/lxc/lxc_driver.c: Wire up security driver functions
* src/lxc/lxc_controller.c: Add a '--security' flag to
specify which security driver to activate
* src/lxc/lxc_container.c, src/lxc/lxc_container.h: Set
the process label just before exec'ing init.
Systemd detects containers based on whether they have
an environment variable starting with 'container=lxc';
using a longer name fits the expectations, while also
allowing detection of who created the container.
Requested by Lennart Poettering, in response to
https://bugs.freedesktop.org/show_bug.cgi?id=45175
* src/lxc/lxc_container.c (lxcContainerBuildInitCmd): Add another
env-var.
The current setup code for LXC is bind mounting /dev/pts/ptmx
on top of a character device /dev/ptmx. This is denied by SELinux
policy and is just wrong. The target of a bind mount should just
be a plain file
* src/lxc/lxc_container.c: Don't bind /dev/pts/ptmx onto
a char device
Reusing common code makes things smaller; it also buys us some
additional safety, such as now rejecting duplicate parameters
during a set operation.
* src/qemu/qemu_driver.c (qemuDomainSetBlkioParameters)
(qemuDomainSetMemoryParameters, qemuDomainSetNumaParameters)
(qemuSetSchedulerParametersFlags)
(qemuDomainSetInterfaceParameters, qemuDomainSetBlockIoTune)
(qemuDomainGetBlkioParameters, qemuDomainGetMemoryParameters)
(qemuDomainGetNumaParameters, qemuGetSchedulerParametersFlags)
(qemuDomainBlockStatsFlags, qemuDomainGetInterfaceParameters)
(qemuDomainGetBlockIoTune): Use new helpers.
* src/esx/esx_driver.c (esxDomainSetSchedulerParametersFlags)
(esxDomainSetMemoryParameters)
(esxDomainGetSchedulerParametersFlags)
(esxDomainGetMemoryParameters): Likewise.
* src/libxl/libxl_driver.c
(libxlDomainSetSchedulerParametersFlags)
(libxlDomainGetSchedulerParametersFlags): Likewise.
* src/lxc/lxc_driver.c (lxcDomainSetMemoryParameters)
(lxcSetSchedulerParametersFlags, lxcDomainSetBlkioParameters)
(lxcDomainGetMemoryParameters, lxcGetSchedulerParametersFlags)
(lxcDomainGetBlkioParameters): Likewise.
* src/test/test_driver.c (testDomainSetSchedulerParamsFlags)
(testDomainGetSchedulerParamsFlags): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorSetSchedulerParameters)
(xenHypervisorGetSchedulerParameters): Likewise.
Based on qemu changes made in commits ae523427 and 659ded58.
* src/lxc/lxc_driver.c (lxcSetSchedulerParametersFlags)
(lxcGetSchedulerParametersFlags, lxcDomainSetBlkioParameters)
(lxcDomainGetBlkioParameters): Use helpers.
(lxcDomainSetBlkioParameters): Allow setting live and config at
once.
Given an LXC guest with a root filesystem path of
/export/lxc/roots/helloworld/root
During startup, we will pivot the root filesystem to end up
at
/.oldroot/export/lxc/roots/helloworld/root
We then try to open
/.oldroot/export/lxc/roots/helloworld/root/dev/pts
Now consider if '/export/lxc' is an absolute symlink pointing
to '/media/lxc'. The kernel will try to open
/media/lxc/roots/helloworld/root/dev/pts
whereas it should be trying to open
/.oldroot//media/lxc/roots/helloworld/root/dev/pts
To deal with the fact that the root filesystem can be moved,
we need to resolve symlinks in *any* part of the filesystem
source path.
* src/libvirt_private.syms, src/util/util.c,
src/util/util.h: Add virFileResolveAllLinks to resolve
all symlinks in a path
* src/lxc/lxc_container.c: Resolve all symlinks in filesystem
paths during startup
Currently the LXC controller attempts to deal with EOF on a
tty by spawning a thread to do an edge triggered epoll_wait().
This avoids the normal event loop spinning on POLLHUP. There
is a subtle mistake though - even after seeing POLLHUP on a
master PTY, it is still perfectly possible & valid to write
data to the PTY. There is a buffer that can be filled with
data, even when no client is present.
The second mistake is that the epoll_wait() thread was not
looking for the EPOLLOUT condition, so when a new client
connects to the LXC console, it had to explicitly send a
character before any queued output would appear.
Finally, there was in fact no need to spawn a new thread to
deal with epoll_wait(). The epoll file descriptor itself
can be poll()'d on normally.
This patch attempts to deal with all these problems.
- The blocking epoll_wait() thread is replaced by a poll
on the epoll file descriptor which then does a non-blocking
epoll_wait() to handle events
- Even if POLLHUP is seen, we continue trying to write
any pending output until getting EAGAIN from write.
- Once write returns EAGAIN, we modify the epoll event
mask to also look for EPOLLOUT
* src/lxc/lxc_controller.c: Avoid stalled I/O upon
connected to an LXC console
The lifetime of the virDomainEventState object is tied to
the lifetime of the driver, which in stateless drivers is
tied to the lifetime of the virConnectPtr.
If we add & remove a timer when allocating/freeing the
virDomainEventState object, we can get a situation where
the timer still triggers once after virDomainEventState
has been freed. The timeout callback can't keep a ref
on the event state though, since that would be a circular
reference.
The trick is to only register the timer when a callback
is registered with the event state & remove the timer
when the callback is unregistered.
The demo for the bug is to run
while true ; do date ; ../tools/virsh -q -c test:///default 'shutdown test; undefine test; dominfo test' ; done
prior to this fix, it will frequently hang and / or
crash, or corrupt memory
Currently all drivers using domain events need to provide a callback
for handling a timer to dispatch events in a clean stack. There is
no technical reason for dispatch to go via driver specific code. It
could trivially be dispatched directly from the domain event code,
thus removing tedious boilerplate code from all drivers
Also fix the libxl & xen drivers to pass 'true' when creating the
virDomainEventState, since they run inside the daemon & thus always
expect events to be present.
* src/conf/domain_event.c, src/conf/domain_event.h: Internalize
dispatch of events from timer callback
* src/libxl/libxl_driver.c, src/lxc/lxc_driver.c,
src/qemu/qemu_domain.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c: Remove all timer dispatch functions
When registering a callback for a particular event some callers
need to know how many callbacks already exist for that event.
While it is possible to ask for a count, this is not free from
race conditions when threaded. Thus the API for registering
callbacks should return the count of callbacks. Also rename
virDomainEventStateDeregisterAny to virDomainEventStateDeregisterID
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Return count of callbacks when
registering callbacks
* src/libxl/libxl_driver.c, src/libxl/libxl_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/remote/remote_driver.c, src/uml/uml_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xen_driver.c: Update
for change in APIs
A preparatory patch for DHCP snooping where we want to be able to
differentiate between a VM's interface using the tuple of
<VM UUID, Interface MAC address>. We assume that MAC addresses could
possibly be re-used between different networks (VLANs) thus do not only
want to rely on the MAC address to identify an interface.
At the current 'final destination' in virNWFilterInstantiate I am leaving
the vmuuid parameter as ATTRIBUTE_UNUSED until the DHCP snooping patches arrive.
(we may not post the DHCP snooping patches for 0.9.9, though)
Mostly this is a pretty trivial patch. On the lowest layers, in lxc_driver
and uml_conf, I am passing the virDomainDefPtr around until I am passing
only the VM's uuid into the NWFilter calls.
The virTimestamp and virTimeMs functions in src/util/util.h
duplicate functionality from virtime.h, in a non-async signal
safe manner. Remove them, and convert all code over to the new
APIs.
* src/util/util.c, src/util/util.h: Delete virTimeMs and virTimestamp
* src/lxc/lxc_driver.c, src/qemu/qemu_domain.c,
src/qemu/qemu_driver.c, src/qemu/qemu_migration.c,
src/qemu/qemu_process.c, src/util/event_poll.c: Convert to use
virtime APIs
After the previous patch, there are now some redundant checks.
* src/qemu/qemu_driver.c (qemudDomainGetVcpuPinInfo)
(qemuGetSchedulerParametersFlags): Drop checks now guaranteed by
libvirt.c.
* src/lxc/lxc_driver.c (lxcGetSchedulerParametersFlags):
Likewise.
Add the core functions that implement the functionality of the API.
Suspend is done by using an asynchronous mechanism so that we can return
the status to the caller before the host gets suspended. This asynchronous
operation is achieved by suspending the host in a separate thread of
execution. However, returning the status to the caller is only best-effort,
but not guaranteed.
To resume the host, an RTC alarm is set up (based on how long we want to
suspend) before suspending the host. When this alarm fires, the host
gets woken up.
Suspend-to-RAM operation on a host running Linux can take upto more than 20
seconds, depending on the load of the system. (Freezing of tasks, an operation
preceding any suspend operation, is given up after a 20 second timeout).
And Suspend-to-Disk can take even more time, considering the time required
for compaction, creating the memory image and writing it to disk etc.
So, we do not allow the user to specify a suspend duration of less than 60
seconds, to be on the safer side, since we don't want to prematurely declare
failure when we only had to wait for some more time.
To make lxcSetContainerResources smaller, pull the mem tune
and device ACL setup code out into separate methods
* src/lxc/lxc_controller.c: Introduce lxcSetContainerMemTune
and lxcSetContainerDeviceACL
While LXC does not have the concept of VCPUS, so we can't do
per-VCPU pCPU placement, we can support the VM level CPU
placement. Todo this simply set the CPU affinity of the LXC
controller at startup. All child processes will inherit this
affinity.
* src/lxc/lxc_controller.c: Set process affinity
Support creation of macvlan devices for LXC containers. Do not
allow setting of bandwidth controls or vport profiles due to the
complication that there is no host side visible device to work
with.
* src/lxc/lxc_driver.c: Support type=direct interfaces
The current lxcSetupInterfaces() method directly performs setup
of the bridge devices. Since it will shortly need to also create
macvlan devices, move the bridge related code into a separate
method
* src/lxc/lxc_driver.c: Split lxcSetupInterfaces() to create a
new lxcSetupInterfaceBridge()
Move the virNetDevSetName and virNetDevSetNamespace APIs out
of LXC's veth.c and into virnetdev.c.
Move the remaining content of the file to src/util/virnetdevveth.c
* src/lxc/veth.c: Rename to src/util/virnetdevveth.c
* src/lxc/veth.h: Rename to src/util/virnetdevveth.h
* src/util/virnetdev.c, src/util/virnetdev.h: Add
virNetDevSetName and virNetDevSetNamespace
* src/lxc/lxc_container.c, src/lxc/lxc_controller.c,
src/lxc/lxc_driver.c: Update include paths
The src/lxc/veth.c file contains APIs for managing veth devices,
but some of the APIs duplicate stuff from src/util/virnetdev.h.
Delete thed duplicate APIs and rename the remaining ones to
follow virNetDevVethXXXX
* src/lxc/veth.c, src/lxc/veth.h: Rename APIs & delete duplicates
* src/lxc/lxc_container.c, src/lxc/lxc_controller.c,
src/lxc/lxc_driver.c: Update for API renaming
Following the renaming of the bridge management APIs, we can now
split the source file into 3 corresponding pieces
* src/util/virnetdev.c: APIs for any type of network interface
* src/util/virnetdevbridge.c: APIs for bridge interfaces
* src/util/virnetdevtap.c: APIs for TAP interfaces
* src/util/virnetdev.c, src/util/virnetdev.h,
src/util/virnetdevbridge.c, src/util/virnetdevbridge.h,
src/util/virnetdevtap.c, src/util/virnetdevtap.h: Copied
from bridge.{c,h}
* src/util/bridge.c, src/util/bridge.h: Split into 3 pieces
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
src/openvz/openvz_driver.c, src/qemu/qemu_command.c,
src/qemu/qemu_conf.h, src/uml/uml_conf.c, src/uml/uml_conf.h,
src/uml/uml_driver.c: Update #include directives
The existing brXXX APIs in src/util/bridge.h are renamed to
follow one of three different conventions
- virNetDevXXX - operations for any type of interface
- virNetDevBridgeXXX - operations for bridge interfaces
- virNetDevTapXXX - operations for tap interfaces
* src/util/bridge.h, src/util/bridge.c: Rename all APIs
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
src/qemu/qemu_command.c, src/uml/uml_conf.c,
src/uml/uml_driver.c: Update for API renaming
Currently every caller of the brXXX APIs has to store the returned
errno value and then raise an error message. This results in
inconsistent error messages across drivers, additional burden on
the callers and makes the error reporting inaccurate since it is
hard to distinguish different scenarios from 1 errno value.
* src/util/bridge.c: Raise errors instead of returning errnos
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
src/qemu/qemu_command.c, src/uml/uml_conf.c,
src/uml/uml_driver.c: Remove error reporting code
The bridge management APIs in src/util/bridge.c require a brControl
object to be passed around. This holds the file descriptor for the
control socket. This extra object complicates use of the API for
only a minor efficiency gain, which is in turn entirely offset by
the need to fork/exec the brctl command for STP configuration.
This patch removes the 'brControl' object entirely, instead opening
the control socket & closing it again within the scope of each method.
The parameter names for the APIs are also made to consistently use
'brname' for bridge device name, and 'ifname' for an interface
device name. Finally annotations are added for non-NULL parameters
and return check validation
* src/util/bridge.c, src/util/bridge.h: Remove brControl object
and update API parameter names & annotations.
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
src/uml/uml_conf.h, src/uml/uml_conf.c, src/uml/uml_driver.c,
src/qemu/qemu_command.c, src/qemu/qemu_conf.h,
src/qemu/qemu_driver.c: Remove reference to 'brControl' object
I got this weird failure:
error: Failed to start domain simple
error: internal error cannot mix caller fds with blocking execution
and tracked it down to a use-after-free - virCommandSetOutputFD
was storing the address of a stack-local variable, which then
went out of scope before the virCommandRun that dereferenced it.
Bug introduced in commit 451cfd05 (0.9.2).
* src/lxc/lxc_driver.c (lxcBuildControllerCmd): Move log fd
registration...
(lxcVmStart): ...to caller.
Based on a Coverity report - the return value of waitpid() should
always be checked, to avoid problems with leaking resources.
* src/lxc/lxc_controller.c (lxcControllerRun): Use simpler virPidAbort.
The default console type may vary based on the OS type. ie a Xen
paravirt guests wants a 'xen' console, while a fullvirt guests
wants a 'serial' console.
A plain integer default console type in the capabilities does
not suffice. Instead introduce a callback that is passed the
OS type.
* src/conf/capabilities.h: Use a callback for default console
type
* src/conf/domain_conf.c, src/conf/domain_conf.h: Use callback
for default console type. Add missing LXC/OpenVZ console types.
* src/esx/esx_driver.c, src/libxl/libxl_conf.c,
src/lxc/lxc_conf.c, src/openvz/openvz_conf.c,
src/phyp/phyp_driver.c, src/qemu/qemu_capabilities.c,
src/uml/uml_conf.c, src/vbox/vbox_tmpl.c,
src/vmware/vmware_conf.c, src/xen/xen_hypervisor.c,
src/xenapi/xenapi_driver.c: Set default console type callback
To allow virDomainOpenConsole to access non-primary consoles,
device aliases are required to be set. Until now only the QEMU
driver has done this. Update LXC & UML to set aliases for any
console devices
* src/lxc/lxc_driver.c, src/uml/uml_driver.c: Set aliases
for console devices
Currently the LXC controller only supports setup of a single
text console. This is wired up to the container init's stdio,
as well as /dev/console and /dev/tty1. Extending support for
multiple consoles, means wiring up additional PTYs to /dev/tty2,
/dev/tty3, etc, etc. The LXC controller is passed multiple open
file handles, one for each console requested.
* src/lxc/lxc_container.c, src/lxc/lxc_container.h: Wire up
all the /dev/ttyN links required to symlink to /dev/pts/NN
* src/lxc/lxc_container.h: Open more container side /dev/pts/NN
devices, and adapt event loop to handle I/O from all consoles
* src/lxc/lxc_driver.c: Setup multiple host side PTYs
The current I/O code for LXC uses a hand crafted event loop
to forward I/O between the container & host app, based on
epoll to handle EOF on PTYs. This event loop is not easily
extensible to add more consoles, or monitor other types of
file descriptors.
Remove the custom event loop and replace it with a normal
libvirt event loop. When detecting EOF on a PTY, disable
the event watch on that FD, and fork off a background thread
that does a edge-triggered epoll() on the FD. When the FD
finally shows new incoming data, the thread re-enables the
watch on the FD and exits.
When getting EOF from a read() on the PTY, the existing code
would do waitpid(WNOHANG) to see if the container had exited.
Unfortunately there is a race condition, because even though
the process has closed its stdio handles, it might still
exist.
To deal with this the new event loop uses a SIG_CHILD handler
to perform the waitpid only when the container is known to
have actually exited.
* src/lxc/lxc_controller.c: Rewrite the event loop to use
the standard APIs.
While Xen only has a single paravirt console, UML, and
QEMU both support multiple paravirt consoles. The LXC
driver can also be trivially made to support multiple
consoles. This patch extends the XML to allow multiple
<console> elements in the XML. It also makes the UML
and QEMU drivers support this config.
* src/conf/domain_conf.c, src/conf/domain_conf.h: Allow
multiple <console> devices
* src/lxc/lxc_driver.c, src/xen/xen_driver.c,
src/xenxs/xen_sxpr.c, src/xenxs/xen_xm.c: Update for
internal API changes
* src/security/security_selinux.c, src/security/virt-aa-helper.c:
Only label consoles that aren't a copy of the serial device
* src/qemu/qemu_command.c, src/qemu/qemu_driver.c,
src/qemu/qemu_process.c, src/uml/uml_conf.c,
src/uml/uml_driver.c: Support multiple console devices
* tests/qemuxml2xmltest.c, tests/qemuxml2argvtest.c: Extra
tests for multiple virtio consoles. Set QEMU_CAPS_CHARDEV
for all console /channel tests
* tests/qemuxml2argvdata/qemuxml2argv-channel-virtio-auto.args,
tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.args
tests/qemuxml2argvdata/qemuxml2argv-console-virtio.args: Update
for correct chardev syntax
* tests/qemuxml2argvdata/qemuxml2argv-console-virtio-many.args,
tests/qemuxml2argvdata/qemuxml2argv-console-virtio-many.xml: New
test file
Allow the user to call with nparams too small, per API documentation.
Also, libvirt.c filters out nparams of 0 for scheduler parameters.
* src/lxc/lxc_driver.c (lxcDomainGetMemoryParameters): Allow fewer
than max.
(lxcGetSchedulerParametersFlags): Drop redundant check.
Document the parameter names that will be used by
virDomain{Get,Set}SchedulerParameters{,Flags}, rather than
hard-coding those names in each driver, to match what is
done with memory, blkio, and blockstats parameters.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_SCHEDULER_CPU_SHARES)
(VIR_DOMAIN_SCHEDULER_VCPU_PERIOD)
(VIR_DOMAIN_SCHEDULER_VCPU_QUOTA, VIR_DOMAIN_SCHEDULER_WEIGHT)
(VIR_DOMAIN_SCHEDULER_CAP, VIR_DOMAIN_SCHEDULER_RESERVATION)
(VIR_DOMAIN_SCHEDULER_LIMIT, VIR_DOMAIN_SCHEDULER_SHARES): New
field name macros.
* src/qemu/qemu_driver.c (qemuSetSchedulerParametersFlags)
(qemuGetSchedulerParametersFlags): Use new defines.
* src/test/test_driver.c (testDomainGetSchedulerParamsFlags)
(testDomainSetSchedulerParamsFlags): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorGetSchedulerParameters)
(xenHypervisorSetSchedulerParameters): Likewise.
* src/xen/xend_internal.c (xenDaemonGetSchedulerParameters)
(xenDaemonSetSchedulerParameters): Likewise.
* src/lxc/lxc_driver.c (lxcSetSchedulerParametersFlags)
(lxcGetSchedulerParametersFlags): Likewise.
* src/esx/esx_driver.c (esxDomainGetSchedulerParametersFlags)
(esxDomainSetSchedulerParametersFlags): Likewise.
* src/libxl/libxl_driver.c (libxlDomainGetSchedulerParametersFlags)
(libxlDomainSetSchedulerParametersFlags): Likewise.
If an LXC VM fails to start, quite a few cleanup paths will
result in the original error message being overwritten. Some
other cleanup paths also forgot to actually terminate the VM.
* src/lxc/lxc_driver.c: Ensure VM is terminated on startup
failure and preserve original error
The LXC code for mounting container filesystems from block devices
tries all filesystems in /etc/filesystems and possibly those in
/proc/filesystems. The regular mount binary, however, first tries
using libblkid to detect the format. Add support for doing the same
in libvirt, since Fedora's /etc/filesystems is missing many formats,
most notably ext4 which is the default filesystem Fedora uses!
* src/Makefile.am: Link libvirt_lxc to libblkid
* src/lxc/lxc_container.c: Probe filesystem format with libblkid
If we looped through /etc/filesystems trying to mount with each
type and failed all options, we forget to actually raise an
error message.
* src/lxc/lxc_container.c: Raise error if unable to detect
the filesystems. Also fix existing error message
The kernel automounter is mostly broken wrt to containers. Most
notably if you start a new filesystem namespace and then attempt
to unmount any autofs filesystem, it will typically fail with a
weird error message like
Failed to unmount '/.oldroot/sys/kernel/security':Too many levels of symbolic links
Attempting to detach the autofs mount using umount2(MNT_DETACH)
will also fail with the same error. Therefore if we get any error on
unmount()ing a filesystem from the old root FS when starting a
container, we must immediately break out and detach the entire
old root filesystem (ignoring any mounts below it).
This has the effect of making the old root filesystem inaccessible
to anything inside the container, but at the cost that the mounts
live on in the kernel until the container exits. Given that SystemD
uses autofs by default, we need LXC to be robust this scenario and
thus this tradeoff is worthwhile.
* src/lxc/lxc_container.c: Detach root filesystem if any umount
operation fails.
The /etc/filesystems file can contain a '*' on the last line to
indicate that /proc/filessystems should be tried next. We have
a check that this '*' only occurs on the last line. Unfortunately
when we then start reading /proc/filesystems, we mistakenly think
we've seen '*' in /proc/filesystems and fail
* src/lxc/lxc_container.c: Skip '*' validation when we're reading
/proc/filesystems
Only some of the return paths of lxcContainerWaitForContinue will
have set errno. In other paths we need to set it manually to avoid
the caller getting a random stale errno value
* src/lxc/lxc_container.c: Set errno in lxcContainerWaitForContinue
Previous commit clears number of items alocated in lxcSetupLoopDevices
if VIR_REALLOC_N fails. In that case, the pointer is not NULL, and
causes leaking FDs that have been allocated.
* src/lxc/lxc_controller.c: revert zeroing array size
If the function lxcSetupLoopDevices(def, &nloopDevs, &loopDevs) failed,
the variable loopDevs will keep a initial NULL value, however, the
function VIR_FORCE_CLOSE(loopDevs[i]) will directly deref it.
This patch also fixes returning a bogous number of devices from
lxcSetupLoopDevices on an error path.
* rc/lxc/lxc_controller.c: fixed a null pointer dereference.
Signed-off-by: Alex Jia <ajia@redhat.com>
Cppcheck detected a syntaxError on lxcDomainInterfaceStats.
* src/lxc/lxc_driver.c: fixed missing '{' in the function lxcDomainInterfaceStats.
Signed-off-by: Alex Jia <ajia@redhat.com>
Based on a report by Coverity. waitpid() can leak resources if it
fails with EINTR, so it should never be used without checking return
status. But we already have a helper function that does that, so
use it in more places.
* src/lxc/lxc_container.c (lxcContainerAvailable): Use safer
virWaitPid.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput, virtTestMain):
Likewise.
* src/libvirt.c (virConnectAuthGainPolkit): Simplify with virCommand.
The glibc ones (intentionally) cannot handle ptys opened in a
devpts not mounted at /dev/pts.
Drop the (un-exported, unused) virFileOpenTtyAt.
Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We recently added support for VIR_DOMAIN_START_AUTODESTROY and
an impl to the QEMU driver. It is very desirable to support in
other drivers, so this adds it to LXC and UML
* src/lxc/lxc_conf.h, src/lxc/lxc_driver.c,
src/uml/uml_conf.h, src/uml/uml_driver.c: Wire up autodestroy
functions
Detected by Coverity. We want to increment the size_t counter,
not the pointer to the counter. Bug present since 5f5c6fde (0.9.5).
* src/lxc/lxc_controller.c (lxcSetupLoopDevices): Use correct
precedence.
If using one of the new non-NAT/routed virtual network
configurations, the LXC driver would not know how to
setup the VETH devices. Adding in calls to setup the
"actual" network configuration at VM startup and cleanup
when shutting down fixes this.
* src/lxc/lxc_driver.c: Setup/cleanup actual net devs
When booting a virtual machine with a kernel/initrd it is possible
to pass command line arguments using the <cmdline>...args...</cmdline>
element in the guest XML. These appear to the kernel / init process
in /proc/cmdline.
When booting a container we do not have a custom /proc/cmdline,
but we can easily set an environment variable for it. Ideally
we could pass individual arguments to the init process as a
regular set of 'char *argv[]' parameters, but that would involve
libvirt parsing the <cmdline> XML text. This can easily be added
later, even if we add the env variable now
* docs/drvlxc.html.in: Document env variables passed to LXC
* src/conf/domain_conf.c: Add <cmdline> to be parsed for
guests of type='exe'
* src/lxc/lxc_container.c: Set LIBVIRT_LXC_CMDLINE env var
Currently, the lxc implementation invokes 'ip' and 'ifconfig' commands
inside a container using 'virRun'. That has the side effect of requiring
those commands to be present and to function in a manner consistent with
the usage. Some small roots (such as ttylinux) may not have 'ip' or
'ifconfig'.
This patch replaces the use of these commands with usage of
netdevice. The result is that lxc containers do not have to implement
those commands, and lxc in libvirt is only dependent on the netdevice
interface.
I've tested this patch locally against the ubuntu libvirt version enough
to verify its generally sane. I attempted to build upstream today, but
failed with:
/usr/bin/ld:
../src/.libs/libvirt_driver_qemu.a(libvirt_driver_qemu_la-qemu_domain.o):
undefined reference to symbol 'xmlXPathRegisterNs@@LIBXML2_2.4.30
Thats probably a local issue only, but I wanted to get this patch up and
see what others thought of it. This is ubuntu bug
https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/828211 .
Hi,
I'm seeing an issue with udev and libvirt-lxc. Libvirt-lxc creates
/dev/ptmx as a symlink to /dev/pts/ptmx. When udev starts up, it
checks the device type, sees ptmx is 'not right', and replaces it
with a 'proper' ptmx.
In lxc, /dev/ptmx is bind-mounted from /dev/pts/ptmx instead of being
symlinked, so udev sees the right device type and leaves it alone.
A patch like the following seems to work for me. Would there be
any objections to this?
>From 4c5035de52de7e06a0de9c5d0bab8c87a806cba7 Mon Sep 17 00:00:00 2001
From: Ubuntu <ubuntu@domU-12-31-39-14-F0-B3.compute-1.internal>
Date: Wed, 31 Aug 2011 18:15:54 +0000
Subject: [PATCH 1/1] make ptmx a bind mount rather than symlink
udev on some systems checks the device type of /dev/ptmx, and replaces it if
not as expected. The symlink created by libvirt-lxc therefore gets replaced.
By creating it as a bind mount, the device type is correct and udev leaves it
alone.
Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
s/VIR_ERR_NO_SUPPORT/VIR_ERR_OPERATION_INVALID/
Special case is changes on lxcDomainInterfaceStats, if it's not
implemented on the platform, prints error like:
lxcError(VIR_ERR_OPERATION_INVALID, "%s",
_("interface stats not implemented on this platform"));
As the function is supported by driver actually, error like
VIR_ERR_NO_SUPPORT is confused.
The functions for manipulating pidfiles are in util/util.{c,h}.
We will shortly be adding some further pidfile related functions.
To avoid further growing util.c, this moves the pidfile related
functions into a dedicated virpidfile.{c,h}. The functions are
also all renamed to have 'virPidFile' as their name prefix
* util/util.h, util/util.c: Remove all pidfile code
* util/virpidfile.c, util/virpidfile.h: Add new APIs for pidfile
handling.
* lxc/lxc_controller.c, lxc/lxc_driver.c, network/bridge_driver.c,
qemu/qemu_process.c: Add virpidfile.h include and adapt for API
renames
A previous commit gave the LXC driver the ability to mount
block devices for the container filesystem. Through use of
the loopback device functionality, we can build on this to
support use of plain file images for LXC filesytems.
By setting the LO_FLAGS_AUTOCLEAR flag we can ensure that
the loop device automatically disappears when the container
dies / shuts down
* src/lxc/lxc_container.c: Raise error if we see a file
based filesystem, since it should have been turned into
a loopback device already
* src/lxc/lxc_controller.c: Rewrite any filesystems of
type=file, into type=block, by binding the file image
to a free loop device
Currently the LXC driver can only populate filesystems from
host filesystems, using bind mounts. This patch allows host
block devices to be mounted. It autodetects the filesystem
format at mount time, and adds the block device to the cgroups
ACL. Example usage is
<filesystem type='block' accessmode='passthrough'>
<source dev='/dev/sda1'/>
<target dir='/home'/>
</filesystem>
* src/lxc/lxc_container.c: Mount block device filesystems
* src/lxc/lxc_controller.c: Add block device filesystems
to cgroups ACL
An application container shouldn't get a private /dev. Fix
the regression from 6d37888e6a
* src/lxc/lxc_container.c: Don't mount /dev for app containers
Revert 6a1f5f568f. Now that libvirt_iohelper takes fds by
inheritance rather than by open() (commit 1eb66479), there is
no longer a race where the parent can unlink() a file prior to
the iohelper open()ing the same file. From there, it makes
more sense to have the callers both create and unlink, rather
than the caller create and the stream unlink, since the latter
was only needed when iohelper had to do the unlink.
* src/fdstream.h (virFDStreamOpenFile, virFDStreamCreateFile):
Callers are responsible for deletion.
* src/fdstream.c (virFDStreamOpenFileInternal): Don't leak created
file on failure.
(virFDStreamOpenFile, virFDStreamCreateFile): Drop parameter.
* src/lxc/lxc_driver.c (lxcDomainOpenConsole): Update callers.
* src/qemu/qemu_driver.c (qemuDomainScreenshot)
(qemuDomainOpenConsole): Likewise.
* src/storage/storage_driver.c (storageVolumeDownload)
(storageVolumeUpload): Likewise.
* src/uml/uml_driver.c (umlDomainOpenConsole): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainScreenshot): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainOpenConsole): Likewise.
Although most functions in libvirt return 0 on success and < 0 on
failure, there are a few functions lingering around that return errno
(a positive value) on failure, and sometimes code calling those
functions incorrectly assumes the <0 standard. I noticed one of these
the other day when auditing networkStartDhcpDaemon after Guido Gunther
found a place where success was improperly returned on failure (that
patch has been acked and is pending a push). The problem was that it
expected the return value from virFileReadPid to be < 0 on failure,
but it was actually positive (it was also neglected to set the return
code in this case, similar to the bug found by Guido).
This all led to the fact that *all* of the virFile*Pid functions in
util.c are returning errno on failure. This patch remedies that
problem by changing them all to return -errno on failure, and makes
any necessary changes to callers of the functions. (In the meantime, I
also properly set the return code on failure of virFileReadPid in
networkStartDhcpDaemon).
A container should not be allowed to modify stuff in /sys
or /proc/sys so make them readonly. Make /selinux readonly
so that containers think that selinux is disabled.
Honour the readonly flag when mounting container filesystems
from the guest XML config
* src/lxc/lxc_container.c: Support readonly mounts
Even in non-virtual root filesystem mode we should be mounting
more than just a new /proc. Refactor lxcContainerMountBasicFS
so that it does everything except for /dev and /dev/pts moving
that into lxcContainerMountDevFS. Pass in a source prefix
to lxcContainerMountBasicFS() so it can be used in both shared
root and private root modes.
* src/lxc/lxc_container.c: Unify mounting code for special
filesystems
The bind mount setup is about to get more complicated.
To avoid having to deal with several copies, pull it
out into a separate lxcContainerMountFSBind method.
Also pull out the iteration over container filesystems,
so that it will be easier to drop in support for non-bind
mount filesystems
* src/lxc/lxc_container.c: Pull bind mount code out into
lxcContainerMountFSBind
When libvirtd restarts it will attempt to reconnect to existing
LXC containers. If it loads a XML state file for the container
the container will appear running. If we fail to read the PID
file, or fail to connect to the LXC monitor, we should be killing
off the guest, but if the VMs cgroup does not exist any more,
cleanup will get skipped. Reading the PID file is also pointless
since the PID is in the XML statefile
In lxcReconnectVM we do not need to read the PID file. If part
of the reconnect process fails we need to run the VM terminate
code as a safety net.
In lxcVMTerminate, if we can't obtain the VM cgroup, we know
the process has died, but we must still run lxcVMCleanup to
clear out the virDomainObjPtr live state
* src/lxc/lxc_driver.c: Fix cleanup of dead VMs on restart
The previous patches only cleaned up ATTRIBUTE_UNUSED flags cases;
auditing the drivers found other places where flags was being used
but not validated. In particular, domainGetXMLDesc had issues with
clients accepting a different set of flags than the common
virDomainDefFormat helper function.
* src/conf/domain_conf.c (virDomainDefFormat): Add common flag check.
* src/uml/uml_driver.c (umlDomainAttachDeviceFlags)
(umlDomainDetachDeviceFlags): Reject unknown
flags.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc)
(vboxDomainAttachDeviceFlags)
(vboxDomainDetachDeviceFlags): Likewise.
* src/qemu/qemu_driver.c (qemudDomainMemoryPeek): Likewise.
(qemuDomainGetXMLDesc): Document common flag handling.
* src/libxl/libxl_driver.c (libxlDomainGetXMLDesc): Likewise.
* src/lxc/lxc_driver.c (lxcDomainGetXMLDesc): Likewise.
* src/openvz/openvz_driver.c (openvzDomainGetXMLDesc): Likewise.
* src/phyp/phyp_driver.c (phypDomainGetXMLDesc): Likewise.
* src/test/test_driver.c (testDomainGetXMLDesc): Likewise.
* src/vmware/vmware_driver.c (vmwareDomainGetXMLDesc): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainGetXMLDesc): Likewise.
* src/lxc/lxc_driver.c (lxcOpen, lxcDomainSetMemoryParameters)
(lxcDomainGetMemoryParameters): Reject unknown flags.
* src/lxc/lxc_container.c (lxcContainerStart): Rename flags to
cflags to reflect that it is not tied to libvirt.
The drivers were accepting domain configs without checking if those
were actually meant for them. For example the LXC driver happily
accepts configs with type QEMU.
Add a check for the expected domain types to the virDomainDefParse*
functions.
Some callers expected virFileMakePath to set errno, some expected
it to return an errno value. Unify this to return 0 on success and
-1 on error. Set errno to report detailed error information.
Also optimize virFileMakePath if stat fails with an errno different
from ENOENT.
To avoid regressions, we let callers specify whether to require a
minor and micro version. Callers that were parsing uname() output
benefit from defaulting to 0, whereas callers that were parsing
version strings from other sources should not change in behavior.
* src/util/util.c (virParseVersionString): Allow caller to choose
whether to fail if minor or micro is missing.
* src/util/util.h (virParseVersionString): Update signature.
* src/esx/esx_driver.c (esxGetVersion): Update callers.
* src/lxc/lxc_driver.c (lxcVersion): Likewise.
* src/openvz/openvz_conf.c (openvzExtractVersionInfo): Likewise.
* src/uml/uml_driver.c (umlGetVersion): Likewise.
* src/vbox/vbox_MSCOMGlue.c (vboxLookupVersionInRegistry):
Likewise.
* src/vbox/vbox_tmpl.c (vboxExtractVersion): Likewise.
* src/vmware/vmware_conf.c (vmwareExtractVersion): Likewise.
* src/xenapi/xenapi_driver.c (xenapiGetVersion): Likewise.
Reported by Matthias Bolte.
Since we virEventRegisterDefaultImpl is now a public API, callers need
a way to invoke the default registered Handle and Timeout functions. We
already have general functions for these internally, so promote
them to the public API.
v2:
Actually add APIs to libvirt.h
The LXC driver networking uses veth device pairs. These can
be easily hooked into the network filtering code.
* src/lxc/lxc_driver.c: Add calls to setup/teardown nwfilter
The algorithm for autoassigning vethXXX devices, was always
skipping over the starting dev index when finding a free
name for the guest device. This should only be done if the host
device was autoallocated.
* src/lxc/veth.c: Don't skip over veth indexes
Add a simple handshake with the lxc_controller process so we can detect
process startup failures. We do this by adding a new --handshake cli arg
to lxc_controller for passing a file descriptor. If the process fails to
launch, we scrape all output from the logfile and report it to the user.
