Put it into qemuDomainPrepareShmemChardev() so it can be used later.
Also don't fill in the path unless the server option is enabled.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Some checks will need to be performed for newer device types as well, so
let's not duplicate them.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit 839a060 tied the lifecycle of virtlogd more
closely to that of libvirtd. Unfortunately, while starting
virtlogd when libvirtd is started is definitely a good idea,
restarting virtlogd or shutting it down at any time outside
of system poweroff is not.
Revert part of that commit by removing the PartOf= lines,
meaning that only startup requests will be propagated from
libvirtd to virtlogd.
Resolves: https://bugzilla.redhat.com/1372576
Now that we have two same implementations for getting path for
huge pages backed guest memory, lets merge them into one function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When trying to migrate a huge page enabled guest, I've noticed
the following crash. Apparently, if no specific hugepages are
requested:
<memoryBacking>
<hugepages/>
</memoryBacking>
and there are no hugepages configured on the destination, we try
to dereference a NULL pointer.
Program received signal SIGSEGV, Segmentation fault.
0x00007fcc907fb20e in qemuGetHugepagePath (hugepage=0x0) at qemu/qemu_conf.c:1447
1447 if (virAsprintf(&ret, "%s/libvirt/qemu", hugepage->mnt_dir) < 0)
(gdb) bt
#0 0x00007fcc907fb20e in qemuGetHugepagePath (hugepage=0x0) at qemu/qemu_conf.c:1447
#1 0x00007fcc907fb2f5 in qemuGetDefaultHugepath (hugetlbfs=0x0, nhugetlbfs=0) at qemu/qemu_conf.c:1466
#2 0x00007fcc907b4afa in qemuBuildMemoryBackendStr (size=4194304, pagesize=0, guestNode=0, userNodeset=0x0, autoNodeset=0x0, def=0x7fcc70019070, qemuCaps=0x7fcc70004000, cfg=0x7fcc5c011800, backendType=0x7fcc95087228, backendProps=0x7fcc95087218,
force=false) at qemu/qemu_command.c:3297
#3 0x00007fcc907b4f91 in qemuBuildMemoryCellBackendStr (def=0x7fcc70019070, qemuCaps=0x7fcc70004000, cfg=0x7fcc5c011800, cell=0, auto_nodeset=0x0, backendStr=0x7fcc70020360) at qemu/qemu_command.c:3413
#4 0x00007fcc907c0406 in qemuBuildNumaArgStr (cfg=0x7fcc5c011800, def=0x7fcc70019070, cmd=0x7fcc700040c0, qemuCaps=0x7fcc70004000, auto_nodeset=0x0) at qemu/qemu_command.c:7470
#5 0x00007fcc907c5fdf in qemuBuildCommandLine (driver=0x7fcc5c07b8a0, logManager=0x7fcc70003c00, def=0x7fcc70019070, monitor_chr=0x7fcc70004bb0, monitor_json=true, qemuCaps=0x7fcc70004000, migrateURI=0x7fcc700199c0 "defer", snapshot=0x0,
vmop=VIR_NETDEV_VPORT_PROFILE_OP_MIGRATE_IN_START, standalone=false, enableFips=false, nodeset=0x0, nnicindexes=0x7fcc95087498, nicindexes=0x7fcc950874a0, domainLibDir=0x7fcc700047c0 "/var/lib/libvirt/qemu/domain-1-fedora") at qemu/qemu_command.c:9547
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Both qemu monitor and agent print the same
log on HUANGUP event, which would be confusing
when reading libvirtd log.
This patch will give a different log message to them.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Most of QEMU's PCI display device models, such as:
libvirt video/model/@type QEMU -device
------------------------- ------------
cirrus cirrus-vga
vga VGA
qxl qxl-vga
virtio virtio-vga
come with a linear framebuffer (sometimes called "VGA compatibility
framebuffer"). This linear framebuffer lives in one of the PCI device's
MMIO BARs, and allows guest code (primarily: firmware drivers, and
non-accelerated OS drivers) to display graphics with direct memory access.
Due to architectural reasons on aarch64/KVM hosts, this kind of
framebuffer doesn't / can't work in
qemu-system-(arm|aarch64) -M virt
machines. Cache coherency issues guarantee a corrupted / unusable display.
The problem has been researched by several people, including kvm-arm
maintainers, and it's been decided that the best way (practically the only
way) to have boot time graphics for such guests is to consolidate on
QEMU's "virtio-gpu-pci" device.
>From <https://bugzilla.redhat.com/show_bug.cgi?id=1195176>, libvirt
supports
<devices>
<video>
<model type='virtio'/>
</video>
</devices>
but libvirt unconditionally maps @type='virtio' to QEMU's "virtio-vga"
device model. (See the qemuBuildDeviceVideoStr() function and the
"qemuDeviceVideo" enum impl.)
According to the above, this is not right for the "virt" machine type; the
qemu-system-(arm|aarch64) binaries don't even recognize the "virtio-vga"
device model (justifiedly). Whereas "virtio-gpu-pci", which is a pure
virtio device without a compatibility framebuffer, is available, and works
fine.
(The ArmVirtQemu ("AAVMF") platform of edk2 -- that is, the UEFI firmware
for "virt" -- supports "virtio-gpu-pci", as of upstream commit
3ef3209d3028. See
<https://tianocore.acgmultimedia.com/show_bug.cgi?id=66>.)
Override the default mapping of "virtio", from "virtio-vga" to
"virtio-gpu-pci", if qemuDomainMachineIsVirt() evaluates to true.
Cc: Andrea Bolognani <abologna@redhat.com>
Cc: Drew Jones <drjones@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Martin Kletzander <mkletzan@redhat.com>
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1372901
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Martin Kletzander <mkletzan@redhat.com>
There is nothing Linux-specific in that function. Also since commit
8c3b5bf481 mingw build is broken due to
the fact that this function is not compiled in the library.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In testOpenDefault we create a virtual computer that is later
presented to user. We also pretend to have NUMA cells and
initialize them somehow. But whilst doing so a magical constant
is used. Drop it.
Signed-off-by: Tomáš Ryšavý <tom.rysavy.0@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We will need this function shortly when implementing
nodeGetCPUStats in the test driver.
Signed-off-by: Tomáš Ryšavý <tom.rysavy.0@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Use the state information (online, hotpluggable) provided by the monitor
code rather than trying to infer it. This fixes an issue where on
architectures that require hotplug of multiple threads at once the
sub-cores would get updated as offline on daemon restart thus creating
an invalid configuration.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1375783
Return whether a vcpu entry is hotpluggable or online so that upper
layers don't have to infer the information from other data.
Advantage is that this code can be tested by unit tests.
The algorithm that matches data from query-cpus and
query-hotpluggable-cpus is quite complex. Start using descriptive
iterator names to avoid confusion.
https://bugzilla.redhat.com/show_bug.cgi?id=1372613
Apparently, some management applications use the following code
pattern when waiting for a block job to finish:
while (1) {
virDomainGetBlockJobInfo(dom, disk, info, flags);
if (info.cur == info.end)
break;
sleep(1);
}
Problem with this approach is in its corner cases. In case of
QEMU, libvirt merely pass what has been reported on the monitor.
However, if the block job hasn't started yet, qemu reports cur ==
end == 0 which tricks mgmt apps into thinking job is complete.
The solution is to mangle cur/end values as described here [1].
1: https://www.redhat.com/archives/libvir-list/2016-September/msg00017.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Even though we merely just pass to users whatever qemu provided
on the monitor, we still do some translation. For instance we
turn bytes into mebibytes, or fix job type if needed. However, in
the future there is more fixing to be done so this code deserves
its own function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Name it virNumaGetHostMemoryNodeset and return only NUMA nodes which
have memory installed. This is necessary as the kernel is not very happy
to set the memory cgroup setting for nodes which do not have any memory.
This would break vcpu hotplug with following message on such
configruation:
Invalid value '0,8' for 'cpuset.mems': Invalid argument
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1375268
In a full domain config, libvirt allows overriding the normal PCI
vs. PCI Express rules when a device address is explicitly provided
(so, e.g., you can force a legacy PCI device to plug into a PCIe port,
although libvirt would never do that on its own). However, due to a
bug libvirt doesn't give this same leeway when hotplugging devices. On
top of that, current libvirt assumes that *all* devices are legacy
PCI. The result of all this is that it's impossible to hotplug a
device into a PCIe port, even if you manually add the PCI address.
This can all be traced to the function
virDomainPCIAddressEnsureAddr(), and the fact that it calls
virDomainPCIaddressReserveSlot() for manually set addresses, and that
function hardcodes the argument "fromConfig" to false (meaning "this
address was auto-assigned, so it should be subject to stricter
validation").
Since virDomainPCIAddressReserveSlot() is just a one line simple
wrapper around virDomainPCIAddressReserveAddr() (adding in a hardcoded
reserveEntireSlot = true and fromConfig = false), all that's needed to
solve the problem with no unwanted side effects is to replace that
call for virDomainPCIAddressReserveSlot() with a direct call to
virDomainPCIAddressReserveAddr(), but with reserveEntireSlot = true,
fromConfig = true. That's what this patch does.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1337490
virQEMUDriverConfigNew() always initializes the bitmap in its
cgroupControllers member to -1 (i.e. all 1's).
Prior to commit a9331394, if qemu.conf had a line with
"cgroup_controllers", cgroupControllers would get reset to 0 before
going through a loop setting a bit for each named cgroup controller.
commit a9331394 left out the "reset to 0" part, so cgroupControllers
would always be -1; if you didn't want a controller included, there
was no longer a way to make that happen.
This was discovered by users who were using qemu commandline
passthrough to use the "input-linux" method of directing
keyboard/mouse input to a virtual machine:
https://www.redhat.com/archives/vfio-users/2016-April/msg00105.html
Here's the first report I found of the problem encountered after
upgrading libvirt beyond v2.0.0:
https://www.redhat.com/archives/vfio-users/2016-August/msg00053.html
Thanks to sL1pKn07 SpinFlo <sl1pkn07@gmail.com> for bringing the
problem up in IRC, and then taking the time to do a git bisect and
find the patch that started the problem.
previous commit:
commit 2c3223785c
Author: John Ferlan <jferlan@redhat.com>
Date: Mon Jun 13 12:30:34 2016 -0400
qemu: Add the ability to hotplug the TLS X.509 environment
added a parameter "bool listen" in some methods. This
unfortunately clashes with the listen() method, causing
compile failures on certain platforms (RHEL-6 for example)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit id 'a48c7141' altered how to determine if a volume was encrypted
by adding a peek at an offset into the file at a specific buffer location.
Unfortunately, all that was compared was the first "char" of the buffer
against the expect "int" value.
Restore the virReadBufInt32BE to get the complete field in order to
compare against the expected value from the qcow2EncryptionInfo or
qcow1EncryptionInfo "modeValue" field.
This restores the capability to create a volume with encryption, then
refresh the pool, and still find the encryption for the volume.
A LUKS volume uses the volume secret type just like the QCOW2 secret, so
adjust the loading of the default secrets to handle any volume that the
virStorageFileGetMetadataFromBuf code has deemed to be an encrypted volume
to search for the volume's secret. This lookup is done by volume usage
where the usage is expected to be the path to volume.
When a new filter is being defined, the return code is not handled properly,
thus triggering OOM error reporting routine (bug introduced by 51b2606f).
Signed-off-by: Erik Skultety <eskultet@redhat.com>
When migration fails, we need to poke QEMU monitor to check for a reason
of the failure. We did this using query-migrate QMP command, which is
not supposed to return any meaningful result on the destination side.
Thus if the monitor was still functional when we detected the migration
failure, parsing the answer from query-migrate always failed with the
following error message:
"info migration reply was missing return status"
This irrelevant message was then used as the reason for the migration
failure replacing any message we might have had.
Let's use harmless query-status for poking the monitor to make sure we
only get an error if the monitor connection is broken.
https://bugzilla.redhat.com/show_bug.cgi?id=1374613
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit id 'b00d7f29' shifted the opening of the /sys/devices/intel_cqm/type
file from event enable to perf event initialization. If the file did not
exist, then an error would be written to the domain log:
2016-09-06 20:51:21.677+0000: 7310: error : virFileReadAll:1360 : Failed to open file '/sys/devices/intel_cqm/type': No such file or directory
Since the error is now handled in virPerfEventEnable by checking if the
event_attr->attrType == 0 for CMT, MBML, and MBMT events - we can just
use the Quiet API in order to not log the error we're going to throw away.
Additionally, rather than using virReportSystemError, use virReportError
and VIR_ERR_ARGUMENT_UNSUPPORTED in order to signify that support isn't there
for that type of perf event - adjust the error message as well.
Akin to previous commit but for "virsh cpu-baseline" which
computes a baseline CPU for a set of host cpu elements.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Implement support for "virsh cpu-compare" so that we can calculate
common cpu element between a pool of hosts, which had a requirement
of providing host cpu description.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Parse libxl_hwcap accounting for versions since Xen 4.4 - Xen 4.7.
libxl_hwcaps is a set of cpuid leaves output that is described in [0] or
[1] in Xen 4.7. This is a collection of CPUID leaves that we version
in libvirt whenever feature words are reordered or added. Thus we keep the
common ones in one struct and others for each version. Since
libxl_hwcaps doesn't appear to have a stable format across all supported
versions thus we need to keep track of changes as a compromise until it's
exported in xen libxl API. We don't fail in initializing the driver in case
parsing of hwcaps failed for that reason. In addition, change the notation
on PAE feature such that is easier to read which bit it corresponds.
[0] xen/include/asm-x86/cpufeature.h
[1] xen/include/public/arch-x86/cpufeatureset.h
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Add support for describing cpu topology in host cpu element. In doing
so, refactor hwcaps part to its own helper namely libxlCapsInitCPU to
handle all host cpu related operations, including topology.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Qemu always opens the tray if forced to. Skip the waiting step in such
case.
This also helps if qemu does not report the tray change event when
opening the cdrom forcibly (the documentation says that the event will
not be sent although qemu in fact does trigger it even if @force is
selceted).
This is a workaround for a qemu issue where qemu does not send the tray
change event in some cases (after migration with empty closed locked
drive) and thus renders the cdrom useless from libvirt's point of view.
Partially resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1368368
When a source image is dropped when missing due to startup policy the
policy needs to be cleared since it was relevant only for the given
storage source. New sources need to update it if needed.
Just like in the previous commit, teach qemu driver to detect
whether qemu supports this configuration knob or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
