Rather than VIR_ALLOC() the data, use virDomainChrSourceDefNew in order
to get the private data if necessary.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Use a pointer and the virDomainChrSourceDefNew() function in order to
allocate the structure for _virDomainRedirdevDef.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Use a pointer and the virDomainChrSourceDefNew() function in order to
allocate the structure for _virDomainSmartcardDef.
Signed-off-by: John Ferlan <jferlan@redhat.com>
For some reason the values of memballoon model are set using an
anonymous enum, making it impossible to perform nice tricks like
demanding there are cases for all possible values in a switch. This
patch turns the anonymous enum into virDomainMemballoonModel.
Commit id '5f2a132786' should have placed the data in the host source
def structure since that's also used by smartcard, redirdev, and rng in
order to provide a backend tcp channel. The data in the private structure
will be necessary in order to provide the secret properly.
This also renames the previous names from "Chardev" to "ChrSource" for
the private data structures and API's
Change the virDomainChrDef to use a pointer to 'source' and allocate
that pointer during virDomainChrDefNew.
This has tremendous "fallout" in the rest of the code which mainly
has to change source.$field to source->$field.
Signed-off-by: John Ferlan <jferlan@redhat.com>
New util function virXMLCheckIllegalChars is now used to test if
parsed network contains illegal char '/' in it's name.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Modeled after the qemuDomainHostdevPrivatePtr (commit id '27726d8c'),
create a privateData pointer in the _virDomainChardevDef to allow storage
of private data for a hypervisor in order to at least temporarily store
secret data for usage during qemuBuildCommandLine.
NB: Since the qemu_parse_command (qemuParseCommandLine) code is not
expecting to restore the secret data, there's no need to add code
code to handle this new structure there.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The code is entirely correct, but it still managed to trip me
up when I first ran into it because I did not realize right away
that VIR_PCI_CONNECT_TYPES_ENDPOINT was not a single flag, but
rather a mask including both VIR_PCI_CONNECT_TYPE_PCI_DEVICE and
VIR_PCI_CONNECT_TYPE_PCIE_DEVICE.
In order to save the next distracted traveler in PCI Address Land
some time, document this fact with a comment. Add a test case for
the behavior as well.
A pci-bridge has *almost* the same rules as a legacy PCI endpoint
device for where it can be automatically connected, and until now both
had been considered identical. There is one pairing that is okay when
specifically requested by the user (i.e. manual assignment), but we
want to avoid it when auto-assigning addresses - plugging a pci-bridge
directly into pcie-root (it is cleaner to plug in a dmi-to-pci-bridge,
then plug the pci-bridge into that).
In order to allow that difference, this patch makes a separate
CONNECT_TYPE for pci-bridge, and uses it to restrict auto-assigned
addresses for pci-bridges to be only on pci-root, pci-expander-bus,
dmi-to-pci-bridge, or on another pci-bridge.
NB: As with other discouraged-but-seem-to-work configurations
(e.g. plugging a legacy PCI device into a pcie-root-port) if someone
*really* wants to, they can still force a pci-bridge to be plugged
into pcie-root (by manually specifying its PCI address.)
This function for some weird reason returns integer instead of
virDomainNetType type. It is important to return the correct type
so that we know what values we can expect.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Due to the switch of parameters in a call to virDomainShmemDefEquals()
no device was found when looking for device with all the information
except address. Also fix the indentation.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If the last event callback is unregistered while the event loop is
dispatching, it is only marked as deleted, but not removed. The number
of callbacks is more than zero in that case, so the timer is not
removed. Because it can be removed in this function now (but also
accessed afterwards so that we set 'isDispatching = false' and have it
locked), we need to temporarily increase the reference counter of the
state for the duration of this function.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There is a repeating pattern of code that removes the timer if it's not
needed. So let's move it to a new function. We'll also use it later.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There should be one more reference because it is being kept in the list
of callbacks as an opaque. We also unref it properly using
virObjectFreeCallback.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Make sure that the topology results into a sane number of cpus (up to
UINT_MAX) so that it can be sanely compared to the vcpu count of the VM.
Additionally the helper added in this patch allows to fetch the total
number the topology results to so that it does not have to be
reimplemented later.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1378290
Sometimes virObjectEventStateFlush can be called without timer (if the
last event was unregistered right when the timer fired). There is a
check for timer == -1, but that triggers warning and other log messages,
which is unnecessary.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Rather than copy-paste - use a macro
Unfortunately due to how the RNG schema was written keeping the 'value'
and 'value'_max next to each other in the XML causes a schema failure,
so the FORMAT has to write out singly rather than optimizing to write
out both values at once
Signed-off-by: John Ferlan <jferlan@redhat.com>
When I added support for the pcie-expander-bus controller in commit
bc07251f, I incorrectly thought that it only had a single slot
available. Actually it has 32 slots, just like the root complex aka
pcie-root (the part that I *did* get correct is that unlike pcie-root
a pcie-expander-bus doesn't allow any integrated endpoint devices -
only pcie-root-ports and dmi-to-pci-controllers are allowed).
This breaks vCPU hotplug, because when starting a domain, we
create a copy of domain definition (which becomes live XML) and
during the post parse callbacks we might adjust some tunings so
that vCPU hotplug is possible.
This reverts commit 581b7756af18dcf84b57d9947978725d2dfbfc18.
This breaks vCPU hotplug, because when starting a domain, we
create a copy of domain definition (which becomes live XML) and
during the post parse callbacks we might adjust some tunings so
that vCPU hotplug is possible.
This reverts commit c0f90799bc7fa4b690ead6a592806378a243873c.
Certain operations may make the vcpu order information invalid. Since
the order is primarily used to ensure migration compatibility and has
basically no other user benefits, clear the order prior to certain
operations and document that it may be cleared.
All the operations that would clear the order can still be properly
executed by defining a new domain configuration rather than using the
helper APIs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1370357
So far only guestfwd and virtio were supported. Add an additional
for Xen as libxl channels create a Xen console visible to the guest.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
When creating a copy of virDomainDef we save ourselves the
trouble of writing deep-copy functions and just format and parse
back domain/device XML. However, the XML we are parsing was
already fully formatted - there is no reason to run post parse
callbacks (which fill in blanks - there are none!).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is an internal flag that prevents our two entry points to
XML parsing (virDomainDefParse and virDomainDeviceDefParse) from
running post parse callbacks. This is expected to be used in
cases when we already have full domain/device XML and we are just
parsing it back (i.e. virDomainDefCopy or virDomainDeviceDefCopy)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Just like virDomainDefPostParseCallback has gained new
parseOpaque argument, we need to follow the logic with
virDomainDeviceDefPostParse.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We want to pass the proper opaque pointer instead of NULL to
virDomainDefParse and subsequently virDomainDefParseNode too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We want to pass the proper opaque pointer instead of NULL to
virDomainDefParseXML and subsequently virDomainDefPostParse too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Some callers might want to pass yet another pointer to opaque
data to post parse callbacks. The driver generic one is not
enough because two threads executing post parse callback might
want to see different data (e.g. domain object pointer that
domain def belongs to).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The domain capabilities XML is capable of showing whether each guest CPU
mode is supported or not with a possibility to provide additional
details. This patch enhances host-model capability to advertise the
exact CPU model which will be used as a host-model:
<cpu>
...
<mode name='host-model' supported='yes'>
<model fallback='allow'>Broadwell</model>
<vendor>Intel</vendor>
<feature policy='disable' name='aes'/>
<feature policy='require' name='vmx'/>
</mode>
...
</cpu>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The function filters all CPU features through a given callback while
copying CPU model related parts of a CPU definition.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The function moves CPU model related parts from one CPU definition to
another. It can be used to avoid unnecessary copies from a temporary CPU
definitions which will be freed anyway.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Useful for copying a CPU definition without model related parts (i.e.,
without model name, feature list, vendor).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In case a hypervisor is able to tell us a list of supported CPU models
and whether each CPU models can be used on the current host, we can
propagate this to domain capabilities. This is a better alternative
to calling virConnectCompareCPU for each supported CPU model.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Listing all CPU models supported by QEMU in domain capabilities makes
little sense when libvirt will refuse any model it doesn't know about.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The patch adds <cpu> element to domain capabilities XML:
<cpu>
<mode name='host-passthrough' supported='yes'/>
<mode name='host-model' supported='yes'/>
<mode name='custom' supported='yes'>
<model>Broadwell</model>
<model>Broadwell-noTSX</model>
...
</mode>
</cpu>
Applications can use it to inspect what CPU configuration modes are
supported for a specific combination of domain type, emulator binary,
guest architecture and machine type.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
