While I'm at it, use more g_autofree and g_autoptr() in this
file. This also fixes a possible mem-leak in
virNetDevGetVirtualFunctions().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
I've just got a new machine and I'm still converging on the
kernel config. Anyway, since I don't have enabled any of SRIO-V
drivers, my kernel doesn't have NET_DEVLINK enabled (i.e.
virNetDevGetFamilyId() returns 0). But this makes nodedev driver
ignore all interfaces, because when enumerating all devices via
udev, the control reaches virNetDevSwitchdevFeature() eventually
and subsequently virNetDevGetFamilyId() which 'fails'. Well, it's
not really a failure - the virNetDevSwitchdevFeature() stub
simply returns 0.
Also, move the call a few lines below, just around the place
where it's needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in v3.8.0-rc1~96, the virNetDevGetFamilyId() gets
netlink family ID for passed family name (even though it's used
only for getting "devlink" ID). Nevertheless, the function
returns 0 on an error or if no family ID was found. This makes it
harder for a caller to distinguish these two. Change the retval
so that a negative value is returned upon error, zero is no ID
found (but no error encountered) and a positive value is returned
on successful translation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As explained in the previous commit, we need to relabel the file
we are restoring the domain from. That is the FD that is passed
to QEMU. If the file is not under /dev then the file inside the
namespace is the very same as the one in the host. And regardless
of using transactions, the file will be relabeled. But, if the
file is under /dev then when using transactions only the copy
inside the namespace is relabeled and the one in the host is not.
But QEMU is reading from the one in the host, actually.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1772838
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This API allows drivers to separate out handling of @stdin_path
of virSecurityManagerSetAllLabel(). The thing is, the QEMU driver
uses transactions for virSecurityManagerSetAllLabel() which
relabels devices from inside of domain's namespace. This is what
we usually want. Except when resuming domain from a file. The
file is opened before any namespace is set up and the FD is
passed to QEMU to read the migration stream from. Because of
this, the file lives outside of the namespace and if it so
happens that the file is a block device (i.e. it lives under
/dev) its copy will be created in the namespace. But the FD that
is passed to QEMU points to the original living in the host and
not in the namespace. So relabeling the file inside the namespace
helps nothing.
But if we have a separate API for relabeling the restore file
then the QEMU driver can continue calling
virSecurityManagerSetAllLabel() with transactions enabled and
call this new API without transactions.
We already have an API for relabeling a single file
(virSecurityManagerDomainSetPathLabel()) but in case of SELinux
it uses @imagelabel (which allows RW access) and we want to use
@content_context (which allows RO access).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This commit partially reverts
commit c360ea28dc
Refs: v6.2.0-rc1-1-gc360ea28dc
Author: Rafael Fonseca <r4f4rfs@gmail.com>
AuthorDate: Fri Mar 27 18:40:47 2020 +0100
Commit: Michal Prívozník <mprivozn@redhat.com>
CommitDate: Mon Mar 30 09:48:22 2020 +0200
util: virdaemon: fix compilation on mingw
The daemons are not supported on Win32 and therefore were not compiled
in that platform. However, with the daemon code sharing, all the code in
utils *is* compiled and it failed because `waitpid`, `fork`, and
`setsid` are not available. So, as before, let's not build them on
Win32 and make the code more portable by using existing vir* wrappers.
Not compiling virDaemonForkIntoBackground on Win32 is good, but the
second part of the original patch incorrectly replaced waitpid and fork
with our virProcessWait and virFork APIs. These APIs are more than just
simple wrappers and we don't want any of the extra functionality.
Especially virFork would reset any setup made before
virDaemonForkIntoBackground is called, such as logging, signal handling,
etc.
As a result of the change the additional fix in v6.2.0-67-ga87e4788d2
(util: virdaemon: fix waiting for child processes) is no longer
needed and it is effectively reverted by this commit.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Improving the zPCI example by choosing more distinct values and
adding explanation for fid.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Changing the introduction to bring the idea of this document better across.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
The use of 32favicon.png was removed when the new favicons were
introduced in
commit 40cb5581c4
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Wed Jul 26 18:22:11 2017 +0100
docs: add full set of "favicon" files to support modern clients
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The various favicon files were missing from the favicon list, so never
installed, as was an example code diagram.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We previously added a hack to symlink CSS files from the source dir into
the build dir, to allow the website to be browsed locally. We should
have also done this for any images.
This change merges several variables into one "$(assets)" so that we
treat all static files in the root dir the same way.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Fixes build error introduced in
commit aa15e9259f
Author: Laine Stump <laine@redhat.com>
Date: Sun Apr 5 22:40:37 2020 -0400
qemu/conf: set HOTPLUGGABLE connect flag during PCI address set init
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Trivial comment fix, reflecting the changes in
4ee2b31804.
Signed-off-by: Leonid Bloch <lb.workbox@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Previously, we used virCapabilitiesDomainDataLookup() to fill
machine type in post parse callback if none was provided in the
domain XML. If machine type couldn't be filled in an error was
reported. After 4a4132b462 we've changed it to
virQEMUCapsGetPreferredMachine() which returns NULL, but we no
longer report an error and proceed with the post parse callbacks
processing. This may lead to a crash because the code later on
assumes def->os.machine is not NULL.
Fixes: 4a4132b462
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
When preparing to do a blockcopy, the mirror image is modified so
that QEMU can access it. For instance, the mirror has seclabels
set, if it is a NVMe disk it is detached from the host and so on.
And usually, the restore is done upon successful finish of the
blockcopy operation. But, if something fails then we need to
explicitly revoke the access to the mirror image (and thus
reattach NVMe disk back to the host).
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1822538
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
The idea behind this document is to show, with actual examples,
that users should not expect PCI addresses in the domain XML and
in the guest OS to match.
The first zPCI example already serves this purpose perfectly, so
in the interest of keeping the page as brief and easy to digest
as possible the second one is removed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
The section about VFIO devices is kept separate from the rest
because it's less about domain XML and guest OS disagreeing on the
PCI address of a device, and more about which of the two PCI
addresses in the domain XML is even relevant to the guest OS.
The section on zPCI addresses, on the other hand, falls squarely
in the "more complex cases" category, so it should live in the
corresponding section.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Indent all code snippets by the same number of spaces, and don't
embed the :: marker in the line preceding a code block.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
When we do parallel migration, The multifd-channels migration parameter
needs to be set on the destination side as well before incoming migration
URI, unless we accept the default number of connections(2).
Usually, This can be correctly handled by libvirtd. But in this case if
we use p2p + xbzrle compression without parameter '--comp-xbzrle-cache',
qemuMigrationParamsDump returns too early, The corresponding migration
parameter will not be set on the destination side, It results QEMU hangs.
Reproducer:
virsh migrate --live --p2p --comp-methods xbzrle \
--parallel --parallel-connections 3 GUEST qemu+ssh://dsthost/system
or
virsh migrate --live --p2p --compressed \
--parallel --parallel-connections 3 GUEST qemu+ssh://dsthost/system
Signed-off-by: Lin Ma <lma@suse.com>
Message-Id: <20200416044451.21134-1-lma@suse.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Setting CC="ccache cc" works in most cases, but sometimes it will
break the build: in particular, we have experienced issues in the
past with that approach when using cgo to build our Go bindings.
A more robust approach is to have a directory containing symlinks
from the compiler name to the ccache binary: in that case, ccache
itself will invoke the compiler, and the build system will be none
the wiser.
Since libvirt-ci commit 2563aebb6c5c, container images contain a
suitable symlink directory, so all that's needed to enable the new
approach is to add this directory to $PATH.
Since we're touching this anyway, we make a few more changes:
$CCACHE_DIR is no longer created manually, because ccache will
take care of creating it for us if it doesn't already exist; the
ccache setup is moved out of the job template and into
script_variables, removing unnecessary duplication; a limit is
set on the size of the cache (500 MB, which is twice the amount
used by a fresh build on my Fedora 31 machine).
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since libvirt-ci commit 27cfddee8835, paths to build tools such as
ninja and make are exported in the container's environment and can
be used directly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add some information on how pci address work on s390x.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With libpmem support compiled into qemu it will trigger the following
denials on every startup.
apparmor="DENIED" operation="open" name="/"
apparmor="DENIED" operation="open" name="/sys/bus/nd/devices/"
This is due to [1] that tries to auto-detect if the platform supports
auto flush for all region.
Once we know all the paths that are potentially needed if this feature
is really used we can add them conditionally in virt-aa-helper and labelling
calls in case </pmem> is enabled.
But until then the change here silences the denial warnings seen above.
[1]: https://github.com/pmem/pmdk/blob/master/src/libpmem2/auto_flush_linux.c#L131
Bug: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1871354
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Jamie Strandboge <jamie@canonical.com>
This document describes the relationship between PCI addresses as
seen in the domain XML and by the guest OS, which is a topic that
people get confused by time and time again.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Add the appropriate entries into the schema to allow encryption of the
backup or scratch image. Since we use blockdev internals for everything
no changes to the code are actually necessary.
https://bugzilla.redhat.com/show_bug.cgi?id=1811906
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It was never implemented and for now I don't think there's demand to do
it. Remove the reference.
https://bugzilla.redhat.com/show_bug.cgi?id=1812100
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Starting with 3b076391be
(v6.1.0-122-g3b076391be) we support http cookies. Since they may contain
somewhat sensitive information we should not format them into the XML
unless VIR_DOMAIN_DEF_FORMAT_SECURE is asserted.
Reported-by: Han Han <hhan@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We want to format even the secure information in tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Commit 86608f787e added the above flag as an alias for ambiguous
'delete-snapshots' flag, but forgot to actually change the code that
extracts it, thus the new version actually doesn't work.
https://bugzilla.redhat.com/show_bug.cgi?id=1821988
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We always tried to install backing store for the image even if it didn't
make sense, e.g. for a full backup into a raw image. Additionally we
didn't record the backing file into the qcow2 metadata so the image
itself contained the diff of data but reading from it would be
incomplete as it depends on the backing image.
This patch fixes both issues by carefully installing the correct backing
file when appropriate and also recording it into the metadata when
creating the image.
https://bugzilla.redhat.com/show_bug.cgi?id=1813310
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We've adopted reStructuredText as the primary markup language for
our documentation and, given that both GitLab and GitHub can render
documents in this format just fine, it makes sense to get rid of
the few last remaining bits of Markdown and standardize on
reStructuredText across the board.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is the last missing g_autofree conversion change in the module after
commit 1e2ae2e311 took care of the VIR_AUTOFREE conversion.
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Travis CI reports
root: deprecated key sudo (The key `sudo` has no effect anymore.)
so let's drop it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
All information, except for osx_image image, is identical between
the two jobs so we can avoid repeating it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The newly-introduced CONTRIBUTING.rst serves the same purposes and
lives in the path where most people would look for it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's generally expected that a git repository will contain this file,
which serves as an entry point for people interested in contributing
to the project.
In our case, we have extensive documentation available on the
website which we don't want to duplicate, so let's just point people
there.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Before this patch we would simply rely on QEMU failing to attach the
device. Since we have a flag in the address set telling us which
controllers support hotplug, we can fail the operation sooner.
This also assures that when hotplugging with no provided PCI address,
that we skip any controllers with hotplug='off', and attempt to assign
the device to a controller that not only supports hotplug, but also
has it enabled.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The HOTPLUGGABLE flag is set for appropriates buses in a PCI address
set, and thnis patch updates virDomainPCIAddressFlagsCompatible() to
check the HOTPLUGGABLE flag when searching for a suitable bus/slot for
a device. No devices request HOTPLUGGABLE though (yet), so there is no
observable effect.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virDomainPCIAddressBusSetModel() is called for each PCI controller
when building an address set prior to assiging PCI addresses to
devices.
This patch adds a new argument, allowHotplug, to that function that
can be set to false if we know for certain that a particular
controller won't support hotplug
The most interesting case is in qemuDomainPCIAddressSetCreate(), where
the config of each existing controller is available while building the
address set, so we can appropriately set allowHotplug = false when the
user has "hotplug='off'" in the config of a controller that normally
would support hotplug. In all other cases, it is set to true or false
in accordance with the capability of the controller model.
So far we aren't doing anything with this bus flag in the address set.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Old behavior: If the address was manually provided by config, copy
device AUTOASSIGN flag into the bus flag, and then later on in the
function *always* check for a match of the flags (which will always
match if the address came from config, since we just copied it).
New behavior: Don't mess with the bus flags - just directly check if
the AUTOASSIGN flag matches in bus and dev, but only make the check if
the address didn't come from config (i.e. it was auto-assigned by
libvirt).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When the HOTPLUGGABLE flag was originally added, it was set for all
the PCI controllers that accepted hotplugged devices, and requested
for all devices that were auto-assigned to a controller. While we're
still autoassigning to the same list of controllers, those controllers
may or may not support hotplug, so let's use the flag that fits what
we're actually doing.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This new flag will be set for any controller that we decide can have
devices assigned to it automatically during PCI device assignment. In
the past PCI_CONNECT_TYPE_HOTPLUGGABLE was used for this purpose, but
that is overloading that flag, and no longer technically correct; what
we *really* want is to auto-assign devices to any pcie-root-port or
pcie-switch-downstream-port regardless of whether or not that
controller happens to have hotplug enabled.
This patch just adds the flag, but doesn't use it at all. Note that
the numbering of all the other flags was changed in order to insert
the new flag near the beginning of the list; that doesn't cause any
problem because the connect flags aren't stored anywhere between runs
of libvirtd.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
