Move the tests to DO_TEST_CAPS_LATEST. Since switch to blockdev stopped
us formatting the tunning parameters on the command line let's also add
version cases for qemu-4.1 data which doesn't enable blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When firewalld is stopped, it removes *all* iptables rules and chains,
including those added by libvirt. Since restarting firewalld means
stopping and then starting it, any time it is restarted, libvirt needs
to recreate all the private iptables chains it uses, along with all
the rules it adds.
We already have code in place to call networkReloadFirewallRules() any
time we're notified of a firewalld start, and
networkReloadFirewallRules() will call
networkPreReloadFirewallRules(), which calls
networkSetupPrivateChains(); unfortunately that last call is called
using virOnce(), meaning that it will only be called the first time
through networkPreReloadFirewallRules() after libvirtd starts - so of
course when firewalld is later restarted, the call to
networkSetupPrivateChains() is skipped.
The neat and tidy way to fix this would be if there was a standard way
to reset a pthread_once_t object so that the next time virOnce was
called, it would think the function hadn't been called, and call it
again. Unfortunately, there isn't any official way of doing that (we
*could* just fill it with 0 and hope for the best, but that doesn't
seem very safe.
So instead, this patch just adds a static variable called
chainInitDone, which is set to true after networkSetupPrivateChains()
is called for the first time, and then during calls to
networkPreReloadFirewallRules(), if chainInitDone is set, we call
networkSetupPrivateChains() directly instead of via virOnce().
It may seem unsafe to directly call a function that is meant to be
called only once, but I think in this case we're safe - there's
nothing in the function that is inherently "once only" - it doesn't
initialize anything that can't safely be re-initialized (as long as
two threads don't try to do it at the same time), and it only happens
when responding to a dbus message that firewalld has been started (and
I don't think it's possible for us to be processing two of those at
once), and even then only if the initial call to the function has
already been completed (so we're safe if we receive a firewalld
restart call at a time when we haven't yet called it, or even if
another thread is already in the process of executing it. The only
problematic bit I can think of is if another thread is in the process
of adding an iptable rule at the time we're executing this function,
but 1) none of those threads will be trying to add chains, and 2) if
there was a concurrency problem with other threads adding iptables
rules while firewalld was being restarted, it would still be a problem
even without this change.
This is yet another patch that fixes an occurrence of this error:
COMMAND_FAILED: '/usr/sbin/iptables -w10 -w --table filter --insert LIBVIRT_INP --in-interface virbr0 --protocol tcp --destination-port 67 --jump ACCEPT' failed: iptables: No chain/target/match by that name.
In particular, this resolves: https://bugzilla.redhat.com/1813830
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
networkSetupPrivateChains() is currently called only once per run of
libvirtd, so it can assume that errInitV4 and errInitV6 are empty/null
when it is called. In preparation for potentially calling this
function multiple times during one run, this patch moves the reset of
errInitV[46] to the top of the function, to assure no memory is
leaked.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
As suggested in the linked bug, libvirt should firstly check
whether the major number of the device is device mapper major.
Because if it isn't subsequent DM_DEVICE_DEPS task may not only
fail, but also yield different results. In the bugzilla this is
demonstrated by creating a devmapper target named 'loop0' and
then creating loop target /dev/loop0. When the latter is then
passed to a domain, our virDevMapperGetTargetsImpl() function
blindly asks devmapper to provide target dependencies for
/dev/loop0 and because of the way devmapper APIs work, it will
'sanitize' the input by using the last component only which is
'loop0' and thus return different results than expected.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1823976
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This format is much easier to tweak and update.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It's been more than six months since we adopted GLib and we've
been pretty aggressive at replacing our homegrown APIs with more
standard ones, so by now most of the symbols mentioned in this
document haven't been around for quite a long time already.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
With the move to GitLab CI one of the things we miss from Jenkins is a
single page dashboard showing CI status across all projects. This is a
very simple replacement that uses badges for CI pipeline status.
A CSS tweak is needed because RST->HTML adds redundant <p> tags inside
table cells which causes excessive vertical whitespace to appear.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We have a framework to register cleanup callbacks that are run
when a domain is shut down. The idea is to run callbacks in
reverse order than they were registered. However, looking at the
code this is not the case. Fortunately, this framework is used to
register a single callback and a single callback only -
qemuMigrationDstPrepareCleanup() - therefore there was no problem
just yet.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit a13b2905f7 missed an adjustment to a test that is only run when
building against xen <= 4.9, where LIBXL_HAVE_BUILDINFO_NESTED_HVM is
not defined. Adjust fullvirt-cpuid-legacy-nest test similar to the others.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
When no video device is specified in config we should set both
hvm.nographic to 1 and hvm.vga.kind to NONE.
Without hvm.vga.kind=LIBXL_VGA_INTERFACE_TYPE_NONE both -nographic and
-device 'cirrus-vga' are on qemu cmdline.
Signed-off-by: Artur Puzio <contact@puzio.waw.pl>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Turns out that it's not enough to pass the qemu:///embed root to
virQEMUDriverConfigNew(), you also have to make sure the same
string is copied into the virQEMUDriver structure yourself, and
not doing so in our case resulted in the cleanup never happening
and in distcheck failing because of that.
On the other hand, actually setting config->embeddedRoot would
result in different paths being generated for each test run, which
would obviously break qemuxml2argvtest, so that's not an option
either.
This reverts commit d98cc1968e.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Now that the QEMU driver natively supports storing all its runtime
data inside an arbitrary directory, we can avoid having multiple
copies of the same logic in the test suite.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
To attempt to catch unit tests which accidentally create files in $HOME,
or $XDG_RUNTIME_DIR, poison these env vars by pointing them to
directories which don't exist. This should give easier to debug test
failures. For example:
$ VIR_TEST_DEBUG=1 ./qemuhotplugtest
Could not initialize HostdevManager - operation failed: Failed to create state dir '/bad-test-used-env-xdg-runtime-dir/libvirt/hostdevmgr'
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We need to prevent accidental deletion of release tags and maint
branches.
We need to ensure that shared CI runners are enabled on all repos.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We need this for all tests that use virHostdevManager, because
during creation of this object for unprivileged connections
like those used in the test suite we would end up writing inside
the user's home directory.
That's bad manners in general, but when running the test suite
inside a purposefully constrained environment such as the one
exposed by pbuilder, it turns into an outright test failure:
Could not initialize HostdevManager - operation failed: Failed
to create state dir '/nonexistent/.cache/libvirt/hostdevmgr'
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The churn in the output files is caused primarily by the fact that
blockdev support has been introduced.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The churn in the output files is caused primarily by the fact that
replies were generated on a POWER9 machine, which is good because
we didn't have coverage of that before.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
So that we don't have to chase frequent Fedora releases, move the
non-build related jobs onto the long life CentOS 8 distro.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently, qemucapsprobe fails when libvirt is not already installed
on the system:
$ ./tests/qemucapsprobe /path/to/qemu-system-ppc64 >/dev/null
I/O warning : failed to load external entity "/usr/share/libvirt/cpu_map/index.xml"
2020-05-06 09:49:59.136+0000: 269822: info : libvirt version: 6.4.0
2020-05-06 09:49:59.136+0000: 269822: info : hostname: [...]
2020-05-06 09:49:59.136+0000: 269822: warning : virQEMUCapsLogProbeFailure:5127 :
Failed to probe capabilities for /path/to/qemu-system-ppc64: XML error: failed to
parse xml document '/usr/share/libvirt/cpu_map/index.xml'
It would be great if the tool could work entirely out of the build
directory, and this patch achieves just that.
Suggested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We never supported host-model CPUs on ARM and we don't want to support
them even once patches for direct detection of host CPU are merged. And
since using host CPU definition for host-model CPUs exists only for
backward compatibility, we should not use it for any host-model support
added in the future. Such enhancement should exclusively use the result
of query-cpu-model-expansion. Until proper host-model support is
implemented for ARM (if ever), we need to make sure the detected host
CPU is not accidentally used for host-model CPUs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Start the new capability file for the new development cycle of QEMU.
Note that compared to previous version this was generated on an AMD cpu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When a system has enabled the iptables/ip6tables services rather than
firewalld, there is no explicit ordering of the start of those
services vs. libvirtd. This creates a problem when libvirtd.service is
started before ip[6]tables, as the latter, when it finally is started,
will remove all of the iptables rules that had previously been added
by libvirt, including the custom chains where libvirt's rules are
kept. This results in an error message similar to the following when a
user subsequently tries to start a new libvirt network:
"Error while activating network: Call to virNetworkCreate failed:
internal error: Failed to apply firewall rules
/usr/sbin/ip6tables -w --table filter --insert LIBVIRT_FWO \
--in-interface virbr2 --jump REJECT:
ip6tables: No chain/target/match by that name."
(Prior to logging this error, it also would have caused failure to
forward (or block) traffic in some cases, e.g. for guests on a NATed
network, since libvirt's rules to forward/block had all been deleted
and libvirt didn't know about it, so it couldn't fix the problem)
When this happens, the problem can be remedied by simply restarting
libvirtd.service (which has the side-effect of reloading all
libvirt-generated firewall rules)
Instead, we can just explicitly stating in the libvirtd.service file
that libvirtd.service should start after ip6tables.service and
ip6tables.service, eliminating the race condition that leads to the
error.
There is also nothing (that I can see) in the systemd .service files
to guarantee that firewalld.service will be started (if enabled) prior
to libvirtd.service. The same error scenario given above would occur
if libvirtd.service started before firewalld.service. Even before
that, though libvirtd would have detected that firewalld.service was
disabled, and then turn off all firewalld support. So, for example,
firewalld's libvirt zone wouldn't be used, and most likely traffic
from guests would therefore be blocked (all with no external
indication of the source of the problem other than a debug-level log
when libvirtd was started saying that firewalld wasn't in use); also
libvirtd wouldn't notice when firewalld reloaded its rules (which also
simultaneously deletes all of libvirt's rules).
I'm not aware of any reports that have been traced back to
libvirtd.service starting before firewalld.service, but have seen that
error reported multiple times, and also don't see an existing
dependency that would guarantee firewalld.service starts before
libvirtd.service, so it's possible it's been happening and we just
haven't gotten to the bottom of it.
This patch adds an After= line to the libvirtd.service file for each
of iptables.service, ip6tables.service, and firewalld.servicee, which
should guarantee that libvirtd.service isn't started until systemd has
started whichever of the others is enabled.
This race was diagnosed, and patch proposed, by Jason Montleon in
https://bugzilla.redhat.com/1723698 . At the time (April 2019) danpb
agreed with him that this change to libvirtd.service was a reasonable
thing to do, but I guess everyone thought someone else was going to
post a patch, so in the end nobody did.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
To make it simpler to answer questions of "Why doesn't this thing work
for me?"
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
In formatdomain, using 'libxl' and 'xen' is redundant since they now
both refer to the same driver. 'xen' predates 'libxl' and unambiguously
identifies the Xen hypervisor, so drop the use of 'libxl'.
In aclpolkit, the connection URI was erroneously identified as 'libxl'
and the name 'xenlight'. Change the URI to 'xen' and driver name to 'Xen'.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The libxl driver has suffered an identity crisis since its introduction.
It took on the name 'libxl' since at the time libvirt already contained
a 'xen' driver for the old Xen toolstack implementation. 'libxl' is short
for libxenlight, which is often called xenlight. Unfortunately all forms
of the name are used in the libxl driver.
The only remaining use of the 'xenlight' form is when interacting with
the host device manager, which is difficult to change since it would
cause problems when upgrading the driver.
Rename the #define to make it clear the 'xenlight' form is internal and
add a comment describing why the name exists and that its use should be
discouraged.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The libxl driver declares its name as 'Xen' through the public
virConnectGetType() API. In the virHypervisorDriver table the name is
set to 'xenlight'. To add more confusion, the name is set to 'LIBXL'
in the virStateDriver. For consistency, use the same name in the driver
tables as reported in the public virConnectGetType() API.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The virConnectGetType() returns "Xen" for libxl, not "LIBXL".
This prevents users opening a connection to the libxl driver when using
the modular daemons.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This partially reverts fe65e9c8b5.
In the referenced commit I removed @ret from
virHostValidateBhyve() thinking it wasn't used when in fact it is
- it's usage is hidden under MODULE_STATUS_WARN(). Reintroduce
the variable back.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In a few places we use 0 and false, or 1 and true interchangeably
even though the variable or return type in question is boolean.
Fix those places.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are few places where a return variable is introduced (ret
or retval), but then is never changed and is then passed to
return. Well, we can return the value that the variable is
initialized to directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are few functions that currently return an integer but in
fact they always return the same integer (zero). Make them void.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since it's introduction in v0.9.7-147-gf4324e3292 the
virNetServerClientInitKeepAlive() function returned nothing than
a negative one. Fortunately, this did not pose any problem
because we ignored the retval happily. Well, it's time to check
for the retval because the function might fail regularly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of the following pattern:
type ret;
...
ret = func();
return ret;
we can use:
return func()
directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Debian always runs autoreconf at package build time, which means
that apt-get build-dep will bring in everything that's needed to
build libvirt from a git clone; Fedora and RHEL, however, skip
this step, so we have to install some extra packages manually.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This is the proper way to do it according to our reStructuredText
style guidelines.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Replace Fedora 30 with Fedora 32
Replace Ubuntu 16.04 with Ubuntu 20.04
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This removes the locally maintained DCO checking script in favour of the
shared container image provided by libvirt-ci.git.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
After the commit dc0771c, ret variable no longer
represents the status of the return code, use
data->ret replace it.
Signed-off-by: Xu Yandong <xuyandong2@huawei.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In the past we added 1024 bytes of padding to saved state images so that
users can run "virsh managedsave-edit $GUEST" and make XML changes which
increase the size of the XML document. This padding was accidentally
lost a while back
commit 6b9b21db70
Author: Peter Krempa <pkrempa@redhat.com>
Date: Wed Feb 17 13:10:11 2016 +0100
qemu: Remove unnecessary calculations in qemuDomainSaveMemory
The original 1024 bytes was unreasonably stingy when we consider that
the QEMU state is typically going to be many 100's of MB in size. Thus
this adds 64 KB of padding after the XML which should cope with any
plausible modifications a user will want to make.
https://bugzilla.redhat.com/show_bug.cgi?id=1229255
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Only probe QEMU binary with accel=tcg if TCG is not disabled.
Similarly, only add a VIR_DOMAIN_VIRT_QEMU guest if TCG
is available.
Signed-off-by: Tobin Feldman-Fitzthum <tobin@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since QEMU 2.10 it is possible to disable TCG when building
QEMU. Introduce a capability that reflects this.
Signed-off-by: Tobin Feldman-Fitzthum <tobin@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
