Commit Graph

38881 Commits

Author SHA1 Message Date
Lin Ma
10841b6cb6 qemu: Return perf status that affect next boot for shutoff domains
While we set up perf events for a shutoff domain and check the settings,
All of perf events are reported as 'disabled', unless we add --config,
This is redundant for a shutoff domain.

 # virsh domstate $GUEST
shut off

 # virsh perf --domain $GUEST
cmt            : disabled
mbmt           : disabled
mbml           : disabled
......

 # virsh perf --domain $GUEST --enable mbmt
mbmt           : enabled

 # virsh perf --domain $GUEST
cmt            : disabled
mbmt           : disabled
mbml           : disabled
......

Use virDomainObjGetOneDefState instead of virDomainObjGetOneDef to fix
the issue. After patch, The perf event status of a shutoff domain is
reported correctly:

 # virsh domstate $GUEST
shut off

 # virsh perf --domain $GUEST
cmt            : disabled
mbmt           : disabled
mbml           : disabled
......

 # virsh perf --domain $GUEST --enable mbmt
mbmt           : enabled

 # virsh perf --domain $GUEST
cmt            : disabled
mbmt           : enabled
mbml           : disabled
......

Signed-off-by: Lin Ma <lma@suse.de>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2020-09-12 12:49:31 +02:00
Lin Ma
308ec831bb qemu: qemuDomainPMSuspendForDuration: Check availability of agent
It requires a guest agent configured and running in the domain's guest
OS, So check qemu agent during qemuDomainPMSuspendForDuration().

Signed-off-by: Lin Ma <lma@suse.de>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2020-09-12 12:49:31 +02:00
Jim Fehlig
6de6d6c771 daemon: Fix a comment typo in libvirtd.conf.in
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2020-09-11 14:55:59 -06:00
Tim Wiederhake
f4debada70 util: Remove VIR_REALLOC_N_QUIET
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2020-09-11 18:19:59 +02:00
Tim Wiederhake
569fcd6e2e util: Use glib memory functions in virFileGetXAttrQuiet
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2020-09-11 18:19:59 +02:00
Tim Wiederhake
b668054209 tools: Use glib memory functions in vshCompleterFilter
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2020-09-11 18:19:59 +02:00
Tim Wiederhake
d91faa4fc3 tests: Use glib memory functions in pci_driver_new
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2020-09-11 18:19:59 +02:00
Tim Wiederhake
f3bfebb0b4 tests: Use glib memory functions in add_fd
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2020-09-11 18:19:59 +02:00
Tim Wiederhake
caf5a88e59 qemu: Use glib memory functions in qemuProcessReadLog
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2020-09-11 18:19:58 +02:00
Tim Wiederhake
3e60deeed3 qemu: Use glib memory functions in qemuDomainLogContextRead
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2020-09-11 18:19:58 +02:00
Tim Wiederhake
42459f0b01 qemu: Use glib memory functions in qemuDomainMasterKeyReadFile
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2020-09-11 18:19:58 +02:00
Tim Wiederhake
e5c2b25075 util: Use glib memory functions in virDevMapperGetTargetsImpl
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2020-09-11 18:19:58 +02:00
Tim Wiederhake
85e4418502 util: Use glib memory functions in virThreadCreateFull
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2020-09-11 18:19:58 +02:00
Tim Wiederhake
51b97132b1 util: Use glib memory functions in virLogFilterNew
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2020-09-11 18:19:58 +02:00
Tim Wiederhake
38f7fdfdb4 util: Use glib memory functions in virSaveLastError
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2020-09-11 18:19:58 +02:00
Tim Wiederhake
18216abcfe util: Use glib memory functions in virBitmapNewQuiet
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2020-09-11 18:19:58 +02:00
Tim Wiederhake
a922e72756 rpc: Use glib memory functions in virNetMessageSaveError
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2020-09-11 18:19:58 +02:00
Tim Wiederhake
e228d6b92a tests: Use glib memory functions in virpcimock.c
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2020-09-11 18:19:58 +02:00
Tim Wiederhake
603b97cb32 cpu: Replace VIR_FREE with g_free
Note the use of g_clear_pointer(..., g_free) in ppc64DataClear and virCPUx86Baseline.

Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2020-09-11 15:33:55 +02:00
Tim Wiederhake
eb67d83100 cpu: Replace VIR_ALLOC_N with g_new0
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2020-09-11 15:33:55 +02:00
Tim Wiederhake
ed83c6d9e9 cpu: Replace VIR_ALLOC with g_new0
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2020-09-11 15:33:55 +02:00
Tim Wiederhake
535b4a56d2 cpu_map: Remove unnecessary variable in loadData
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2020-09-11 15:33:55 +02:00
Tim Wiederhake
af7ffa4834 cpu_x86: Use g_auto* in virX86CpuIncompatible
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2020-09-11 15:33:55 +02:00
Tim Wiederhake
ffa6dc0519 cpu_map: Use g_auto* in loadIncludes
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2020-09-11 15:33:55 +02:00
Tim Wiederhake
fc8e0cad0c cpu_map: Use g_auto* in loadData
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2020-09-11 15:33:55 +02:00
Tim Wiederhake
43250af8dd cpu_ppc64: Use g_auto* in ppc64MakeCPUData
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2020-09-11 15:33:55 +02:00
Erik Skultety
9824a82198 qemu: qemuDomainPMSuspendAgent: Don't assign to 'ret' in a conditional
When the guest agent isn't running, we still report success on a PM
suspend action even though we logged an error correctly, this is because
we poisoned the 'ret' value a few lines above.

Fixes: a663a86081

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2020-09-11 14:48:40 +02:00
Michal Privoznik
551fb778f5 virnuma: Use numa_nodes_ptr when checking available NUMA nodes
In v6.7.0-rc1~86 I've tried to fix a problem where we were not
detecting NUMA nodes properly because we misused behaviour of a
libnuma API and as it turned out the behaviour was correct for
hosts with 64 CPUs in one NUMA node. So I changed the code to use
nodemask_isset(&numa_all_nodes, ..) instead and it fixed the
problem on such hosts. However, what I did not realize is that
numa_all_nodes does not reflect all NUMA nodes visible to
userspace, it contains only those nodes that the process
(libvirtd) an allocate memory from, which can be only a subset of
all NUMA nodes. The bitmask that contains all NUMA nodes visible
to userspace and which one I should have used is: numa_nodes_ptr.
For curious ones:

4a22f22382

And as I was fixing virNumaGetNodeCPUs() I came to realize that
we already have a function that wraps the correct bitmask:
virNumaNodeIsAvailable().

Fixes: 24d7d85208
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1876956
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-09-11 13:57:29 +02:00
Michal Privoznik
a2df82b621 virnuma: Assume numa_bitmask_isbitset() exists
This function was introduced in the 2.0.6 release which happened
in December 2010. I think it is safe to assume that all libnuma
we deal with have the function.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-09-11 13:57:21 +02:00
Yi Li
b1f10ed031 tools: virsh-domain: Remove redundant conditional before virshDomainFree
virshDomainFree handles NULL pointers gracefully, so there's no need to
check the pointer before the call.

Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-09-11 10:12:09 +02:00
Laine Stump
b4c0fcd5cc util: remove unused virNetDevIPWaitDadFinish()
Since we no longer need to wait for IPv6 DAD to complete, we never
call this function.

Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-09-10 11:47:35 -04:00
Laine Stump
362cab1d53 network: don't wait for IPv6 DAD completion when starting a network
0f7436ca54 added code during virtual network startup to wait for DAD
(Duplicate Address Detection) to complete if there were any IPv6
addresses on the network. This wait was needed because (according to
the commit log) "created problems when [the "dummy" tap device] is set
to IFF_DOWN prior to DAD completing".

That commit in turn referenced commit db488c7917, which had added the
code to set the dummy tap device IFF_DOWN, commenting "DAD has
happened (dnsmasq waits for it)", and in its commit message pointed
out that if we just got rid of the dummy tap device this wouldn't be
needed.

Now that the dummy tap device has indeed been removed (commit
ee6c936fbb), there is no longer any need to set it IFF_DOWN, and thus
nothing requiring us to wait for DAD to complete. At any rate, with
the dummy tap device removed, leaving nothing else on the bridge when
it is first started, DAD never completes, leading to failure to start
any IPv6 network.

So, yes, this patch removes the wait for DAD completion, and IPv6
networks can once again start, and their associated dnsmasq process
starts successfully (this is the problem that the DAD wait was
originally intended to fix)

Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-09-10 11:41:08 -04:00
Erik Skultety
c7228e4a9c docs: kbase: Tune how CPU support for SEV should be queried
#useless_use_of_cat + avoid accidental substring matches.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-09-10 15:42:40 +02:00
Daniel P. Berrangé
417e556147 Add FreeBSD 11.4 CI job on Cirrus
The previous 11.3 image provided by Cirrus did not boot, but they have
now provided a working 11.4 image

Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-09-10 13:11:46 +01:00
Daniel P. Berrangé
863fce796e Fix linkage to libutil and libkvm on FreeBSD 11
We are currently adding -lutil and -lkvm to the linker using the
add_project_link_arguments method. On FreeBSD 11.4, this results in
build errors because the args appear too early in the command line.

We need to pass the libraries as dependencies so that they get placed
at the same point in the linker args as other dependencies.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-09-10 13:11:46 +01:00
Matt Coleman
2f64aa1c8d Fix a typo in hacking.rst: "contirbute" -> "contribute"
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-09-10 09:13:52 +02:00
Matt Coleman
bc62980eaf Fix errors in contribute.html.in
* Add a period to the end of the page's introductory sentence.
* Correct a spelling error: "Evangalism"/"evangalise" -> "Evangelism"/"evangelize"

Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-09-10 09:13:52 +02:00
Matt Coleman
fdca940619 Fix a typo in compiling.html.in: that -> from
The original author intended to write "different than".
"Different" is commonly followed by "from", "than", and "to".
Globally, "from" is the most common.

Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-09-10 09:13:52 +02:00
Daniel P. Berrangé
ceabe0f4cc remote: fix error reporting for invalid daemon mode
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-09-09 16:46:22 +01:00
Daniel P. Berrangé
f8ec7c842d rpc: use new virt-ssh-helper binary for remote tunnelling
This wires up support for using the new virt-ssh-helper binary with the ssh,
libssh and libssh2 protocols.

The new binary will be used preferentially if it is available in $PATH,
otherwise we fall back to traditional netcat.

The "proxy" URI parameter can be used to force use of netcat e.g.

  qemu+ssh://host/system?proxy=netcat

or the disable fallback e.g.

  qemu+ssh://host/system?proxy=native

With use of virt-ssh-helper, we can now support remote session URIs

  qemu+ssh://host/session

and this will only use virt-ssh-helper, with no fallback. This also lets
the libvirtd process be auto-started, and connect directly to the
modular daemons, avoiding use of virtproxyd back-compat tunnelling.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-09-09 16:46:22 +01:00
Daniel P. Berrangé
6e4143c851 rpc: switch order of args in virNetClientNewSSH
Switch keyfile and netcat parameters, since the netcat path and
socket path are a logical pair that belong together. This patches
the other constructors.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-09-09 16:46:22 +01:00
Daniel P. Berrangé
dfad1b551d remote: introduce virt-ssh-helper binary
When accessing libvirtd over a SSH tunnel, the remote driver needs a way
to proxy the SSH input/output stream to a suitable libvirt daemon. This
is currently done by spawning netcat, pointing it to the libvirtd socket
path. This is problematic for a number of reasons:

 - The socket path varies according to the --prefix chosen at build
   time. The remote client is seeing the local prefix, but what we
   need is the remote prefix

 - The socket path varies according to remote env variables, such as
   the XDG_RUNTIME_DIR location. Again we see the local XDG_RUNTIME_DIR
   value, but what we need is the remote value (if any)

 - The remote driver doesn't know whether it must connect to the legacy
   libvirtd or the modular daemons, so must always assume legacy
   libvirtd for back-compat. This means we'll always end up using the
   virtproxyd daemon adding an extra hop in the RPC layer.

 - We can not able to autospawn the libvirtd daemon for session mode
   access

To address these problems this patch introduces the 'virtd-ssh-helper'
program which takes the URI for the remote driver as a CLI parameter.
It then figures out which daemon to connect to and its socket path,
using the same code that the remote driver client would on the remote
host's build of libvirt.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-09-09 16:46:22 +01:00
Daniel P. Berrangé
1ba30bc1e5 remote: extract logic for determining daemon to connect to
We'll shortly want to reuse code for determining whether to connect to
the system or session daemon from places outside the remote driver
client. Pulling it out into a self contained function facilitates reuse.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-09-09 16:46:22 +01:00
Daniel P. Berrangé
7ce887989a remote: split out function for constructing socket path
The remoteGetUNIXSocketHelper method will be needed by source files
beyond the remote driver client.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-09-09 16:46:22 +01:00
Daniel P. Berrangé
3dfd0cbf25 remote: parse the remote transport string earlier
We delay converting the remote transport string to enum form until
fairly late. As a result we're doing string comparisons when we
could be just doing enum comparisons.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-09-09 16:46:22 +01:00
Daniel P. Berrangé
849de2b844 remote: split out function for parsing URI scheme
The remoteSplitURISCheme method will be needed by source files beyond
the remote driver client.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-09-09 16:46:22 +01:00
Daniel P. Berrangé
9949d9b28f remote: split off enums into separate source file
The remoteDriverTransport and remoteDriverMode enums are going to be
needed by source files beyond the remote driver client.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-09-09 16:46:22 +01:00
Daniel P. Berrangé
5cd80b04d9 remote: push logic for default netcat binary into common helper
We don't want to repeat the choice of default netcat binary setting in
three different places. This will also make it possible to do better
error reporting in the helper.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-09-09 16:46:22 +01:00
Daniel P. Berrangé
019b13dd20 rpc: merge logic for generating remote SSH shell script
Three parts of the code all build up the same SSH shell script
snippet for remote tunneling the RPC protocol, but in slightly
different ways. Combine them all into one helper method in the
virNetClient code, since this logic doesn't really belong in
the virNetSocket code.

Note that the this change means the shell snippet is passed to
the SSH binary as a single arg, instead of three separate args,
but this is functionally identical, as the three separate args
were combined into one already when passed to the remote system.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-09-09 16:46:22 +01:00
Sebastian Mitterle
653fdf48e3 disk storage: fix allocation size for pool format dos
The changed condition was always false because the function was always
called with boundary values 0.

Use the free extent's start value to get its start offset from the
cylinder boundary and determine if the needed size for allocation
needs to be expanded too in case the offset doesn't fit within extra
bytes for alignment.

This fixes an issue where vol-create-from will call qemu-img convert
to create a destination volume of same capacity as the source volume
and qemu-img will error 'Cannot grow device files' due to the partition
being too small for the source although both destination partition and
source volume have the same capacity.

Signed-off-by: Sebastian Mitterle <smitterl@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-09-09 16:53:40 +02:00