There's an if-else statement in libxlCapsInitNuma() that can
really be just two standalone if()-s. Writing it as such helps
with code readability.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Implement this behaviour by skipping the disks on traditional
commandline and hotplug them before resuming CPUs. That allows to use
the support for hotplugging of transient disks which inherently allows
sharing of the backing image as we open it read-only.
This commit implements the validation code to allow it only with buses
supporting hotplug and the hotplug code while starting up the VM.
When we have such disk we need to issue a system-reset so that firmware
tables are regenerated to allow booting from such device.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In case the user wants to share the disk image between multiple VMs the
qemu driver needs to hotplug such disks to instantiate the backends.
Since that doesn't work for all disk configs add a switch to force this
behaviour.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The qemuDomainAttachDiskGeneric will also be used on startup for
transient disks which share the overlay. The VM startup code passes the
asyncJob around so we need to pass it into qemuDomainAttachDiskGeneric.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Add code which creates the transient overlay after hotplugging the disk
backend before attaching the disk frontend.
The state of the topmost image is modified to be already read-only to
prevent the need to open the image in read-write mode.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In preparation for hotplug of <transient> disks we'll need to track
whether the overlay file was created individually per-disk.
Add 'transientOverlayCreated' to 'struct _qemuDomainDiskPrivate' and
remove 'inhibitDiskTransientDelete' from 'qemuDomainObjPrivate' and
adjust the code for the change.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Split up the monitor contexts to attach the backend of the disk and the
frontend device in preparation for hotplugging transient disks where
we'll need to add the code for adding the transient overlay between
these two steps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Modify the rollback section to use its own monitor context so that we
can later split up the hotplug into multiple steps and move the
detachment of the extension device into the rollback section rather than
doing it inline.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Similarly to previous refactors we want to move all hotplug related
setup which isn't strictly relevant to attaching the disk into
qemuDomainAttachDeviceDiskLiveInternal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Remove the 'ret' variable and 'cleanup' label in favor of directly
returning the value since we don't have anything under the 'cleanup:'
label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Remove two empty lines.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Move the auditing entry and insertion into the disk definition from the
function which deals with qemu to 'qemuDomainAttachDeviceDiskLiveInternal'
which deals with the hotplug related specifics.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
qemuDomainAttachDeviceDiskLiveInternal already sets up certain pieces of
the disk definition so it's better suited to move the setup of the
virStorageSource structs, granting access to the storage and allocation
of the alias from qemuDomainAttachDiskGeneric which will be just
handling the qemu interaction.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can call it in one place as all per-device-type subcases use the same
code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Move the validation of the SCSI device address and the attachment of the
controller into qemuDomainAttachDeviceDiskLiveInternal as there's no
specific need for a special helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Move the specific device setup and address reservation code into the
main hotplug helper as it's just one extra function call.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Move the specific device setup and address reservation code into the
main hotplug helper as it's just one extra function call.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Unify the handling of the copy-on-read filter by changing the handling
to use qemuBlockStorageSourceChainData.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Fill in the required fields in qemuBlockStorageSourceChainData to handle
the hotplug so that we can simplify the cleanup code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
qemuBlockStorageSourceChainData encapsulates the backend of the disk for
startup and hotplug operations. Add the handling for the copy-on-read
filter so that the hotplug code doesn't need to have separate cleanup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Replace the last use of the function by virDomainDiskInsert and remove
the unused helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Pre-extending the disk array size is pointless nowadays since we've
switched to memory APIs which don't return failure.
Switch all uses of reallocation of the array followed by
'virDomainDiskInsertPreAlloced' with direct virDomainDiskInsert.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The "machine-loadparm-multiple-disks-nets-s390" case now requires the
QEMU_CAPS_CCW feature to pass validation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
There were two negative tests for the keywrapping feature on s390 when
the feature flag was missing. For now both shared the error message thus
worked fine, but with the upcoming patch to move some disk validation
code from the command line formatter to validation code will change the
error message in case the disk capabilities are missing.
Drop the test cases which don't provide any capability and keep those
that have the disk capabilities present as they are sufficient to prove
the feature.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can skip the formatting of the bootindex for floppies directly at the
place where it's being formatted.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The logic assigning the bootindices from the legacy boot order
configuration was spread through the command line formatters for the
disk device and for the floppy controller.
This patch adds 'effectiveBootindex' property to the disk private data
which holds the calculated boot index and moves the logic of determining
the boot index into 'qemuProcessPrepareDomainDiskBootorder' called from
'qemuProcessPrepareDomainStorage'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Later patches will implement sharing of the backing file, so we'll need
to be able to discriminate the overlays per VM.
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The code deals with the startup of the VM and just uses the snapshot
code to achieve the desired outcome.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We store the virQEMUDriverConfig object in the context.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Remove all the arguments which are present in qemuSnapshotDiskContext.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The config is used both with the preparation and execution functions, so
we can store it in the context to simplify other helpers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Rather than filling various parts of the context from arguments pass in
the whole context.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Creating the overlay for the disk is needed when starting a new VM only.
Additionally for now migration with transient disks is forbidden
anyways.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The code will be later reused when adding support for sharing the
backing image of the snapshot.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
None of them are currently needed to pass our upstream CI, most were
either for ancient clang versions or coverity for silencing false
positives.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
They were added mostly randomly and we don't really want to keep working
around of false positives.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Using slice to cut off the end of the image is a perfectly vaid
configuration. Use 'unsignedInt' instead of 'positiveInteger' for the
'offset' attribute in the XML schema and modify one test case to cover
this use case.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1960993
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
After previous patches we have two structures:
virCapsHostNUMACellDistance and virNumaDistance which express the
same thing. And have the exact same members (modulo their names).
Drop the former in favor of the latter.
This change means that distances with value of 0 are no longer
printed out into capabilities XML, because domain XML code allows
partial distance specification and thus threats value of 0 as
unspecified by user (see virDomainNumaGetNodeDistance() which
returns the default LOCAL/REMOTE distance for value of 0).
Also, from ACPI 6.1 specification, section 5.2.17 System Locality
Distance Information Table (SLIT):
Distance values of 0-9 are reserved and have no meaning.
Thus we shouldn't be ever reporting 0 in neither domain nor
capabilities XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Expose virNumaDistance XML formatter so that it can be re-used by
other parts of the code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There's nothing domain specific about NUMA distances. Rename the
virDomainNumaDistance structure to just virNumaDistance.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The virCapsHostNUMACellSiblingInfo structure really represents
distance to other NUMA node. Rename the structure and variables
of that type to make it more obvious.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This reverts commit <1b22dd6dd44202094e0f78f887cbe790c00e9ebc>.
First of all, the reverted commit is incomplete. It only sets
cpuset.mems in the VM root cgroup when the API is used but there is no
code that would do the same when the VM is started.
Libvirt never places any process into the VM root cgroup directly. All
the supporting processes like slirp-helper or dbus-daemon are placed
into the emulator sub-cgroup and all the QEMU threads are distributed
between emulator, vcpu* and iothread* sub-cgroups. The scenario
described in the reverted commit can happen only if someone manually
adds any process there which we should not care about.
If we would like to set the limit in the VM root cgroup we need to
introduce better logic:
- set both (old and new) numa group in the VM root cgroup
- change the numa group in all sub-cgroups to new value
- finally set only the new value in the VM root cgroup
The simplest fix now is to revert the commit.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The used libxl_domain_build_info, which is contained in
libxl_domain_config, is owned and already initialized by the caller.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
The passed libxl_domain_create_info is owned, and already initialized,
by the caller.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
libxl objects are supposed to be initialized and disposed.
Correct the usage of libxl_device_disk objects which are allocated on
the stack. Initialize each one prior usage, and dispose them once done.
Adjust libxlMakeDisk to use an already initialized object, it is owned
by the caller.
Adjust libxlMakeDiskList to initialize the list of objects, before they
are filled by libxlMakeDisk. In case of error, the objects are disposed
by libxl_domain_config_dispose.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
The description of the function says that the return value is a
file descriptor on success and negative errno on failure which is
not true. If the 'if' case with check on security labels fails,
the return value is -1 not -errno. The solution is to return
'-EINVAL' instead.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
