The admin module is very closely tied to RPC. If we are
building without RPC support there's not much use for the
admin module, in fact it fails to build.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While some SEV info is reported in the domain capabilities,
for reasons of size, this excludes the certificates. The
nodesevinfo command provides the full set of information.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This command reports the launch security parameters for
a guest, allowing an external tool to perform a launch
attestation.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
shared_module() is intended for shared objects that are
loaded at runtime using dlopen() whereas NSS plugins need to
be full-fledged shared libraries with, among other things, a
proper SONAME.
Meson seems to have become more strict about this recently,
because libnss_libvirt.so.2 gets a SONAME when I build it with
Meson 0.59.4 on Fedora 34 but doesn't when I use Meson 0.60.2
on Debian testing instead.
Either way, shared_library() was always the right function
to use for NSS plugins.
Fixes: 36780c9319
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory freeing for the temporary bitmap and remove the
pointless 'cleanup' section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Non-shared storage migration of guests which are disk I/O intensive and
have fast local storage may actually never converge if the guest happens
to dirty the disk faster than it can be copied.
This patch introduces a new flag
'VIR_MIGRATE_NON_SHARED_SYNCHRONOUS_WRITES' which will instruct
hypervisors to synchronize local I/O writes with the writes to remote
storage used for migration so that the guest can't overwhelm the
migration. This comes at a cost of decreased local I/O performance for
guests which behave well on average.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In cases when the destination storage is slower than the normal VM
storage and the VM does intensive I/O to the disk a block copy job may
never converge.
Switching it to synchronous mode will ensure that all writes done by the
guest are propagated to the destination at the cost of slowing down I/O
of the guest to the synchronous speed.
This patch adds the new API flag and implements virsh support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The libvirt_recover_xattrs.sh tool hangs when run. When no flags
are provided OPTIND is 1, so the loop expands to 'shift 0' which
has not effect. Rewrite to just loop over $@ instead which involves
less cleverness.
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In the dissect_xdr_bytes() there's a comment that the string
allocated by xdr_bytes() can't be freed using xdr_free(). Well,
that is expected because xdr_bytes() used plain calloc() AND the
string is not an XDR struct but plain 'char *' type. Passing it
to xdr_free() must result in weird things happening.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When the dissector sees a byte sequence that is either an opaque
data (xdr_opaque) or a byte sequence (xdr_bytes) it formats the
bytes as a hex numbers using our own implementation. But
wireshark already provides a function for it: tvb_bytes_to_str().
NB, the reason why it returns a const string is so that callers
don't try to free it - the string is allocated using an allocator
which will decide when to free it.
The wireshark formatter was introduced in wireshark commit of
v1.99.2~479 and thus is present in the version we require at
least (2.6.0).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
virHostValidateGetCPUFlags returns an allocated virBitmap and
it needs to be freed.
Fixes: a0ec7165e3
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Kristína Hanicová <khanicov@redhat.com>
Trying to connect once without a polkit agent will generate an error on the
server side which seems too rough given it only serves the purpose of the client
(virsh in this case) to figure out that an agent is needed. Thankfully we can
just try running the agent. It does not break anything as we are running it
with `--fallback`, which makes sure it does not replace an existing agent in
case there is one already registered.
The second piece of code trying to start the polkit text agent is kept in order
to _really_ try out starting the agent (and error out when failing to do so)
just in case the agent was not available the first time it was ran. Even though
it should not happen it avoids a very rare race condition and really does not
add much complexity.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1945501
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It only redundantly reflects whether pkagent != NULL.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In some cases we have a label that contains nothing but a return
statement. The amount of such labels rises as we use automagic
cleanup. Anyway, such labels are pointless and can be dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In a few cases we call a public API, wrapped in an if() statement
with both branches written out explicitly. The error branch jumps
onto cleanup label, while the successful prints out a message.
Right after these ifs there's 'ret = true;' and the cleanup
label. The code is a bit more readable if only the error branch
is kept and printing happens at the same level as setting the ret
variable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Kristína Hanicová <khanicov@redhat.com>
With this program we do not have to depend on the output of `certtool -i`, which
changed the order of the fields at some point and the newest version is
incompatible with what libvirt expects in tls_allowed_dn_list configuration
option.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are a few cases where a string list is freed by an explicit
call of g_strfreev(), but the same result can be achieved by
g_atuo(GStrv).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
The new parameter group returns information about network interfaces
Signed-off-by: zhanglei <zhanglei@smartx.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When you set metadata with type element like the following:
dom.setMetadata(libvirt.VIR_DOMAIN_METADATA_ELEMENT, "<test/>", 'abc', "HAHAH", 0)
Then for `virsh event --all`, then it will output this message:
event 'metadata-change' for domain 'rhel9': element HAHAH
The message is ambiguous since it looks like the params for
metadata-change event is the element HAHAH. Actually that means the type is
element while the url is HAHAH. Let's make it more clear.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
* XML serialization and deserialization of PCI VPD;
* PCI VPD capability flags added and used in relevant places;
* XML to XML tests for the added capability.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
Issuing simple QMP commands is pain as they need to be wrapped by the
JSON wrapper:
{ "execute": "COMMAND" }
and optionally also:
{ "execute": "COMMAND", "arguments":...}
For simple commands without arguments we can add syntax sugar to virsh
which allows simple usage of QMP and additionally prepares also for
passing through of the 'arguments' section:
virsh qemu-monitor-command $VM query-status
is equivalent to
virsh qemu-monitor-command $VM '{"execute":"query-status"}'
and
virsh qemu-monitor-command $VM query-named-block-nodes '{"flat":true}'
or
virsh qemu-monitor-command $VM query-named-block-nodes '"flat":true'
is equivalent to
virsh qemu-monitor-command $VM '{"execute":"query-named-block-nodes", "arguments":{"flat":true}}'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virt-host-validate checks if AMD SEV is enabled by verifying
/sys/module/kvm_amd/parameters/sev is set to '1'. On a system
running kernel 5.13, the parameter is reported as 'Y'. To be
extra paranoid, add a check for 'y' along with 'Y' to complement
the existing check for '1'.
Fixes: https://bugzilla.opensuse.org/show_bug.cgi?id=1188715
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There are few places where we can replace explicit
VIR_FORCE_CLOSE() with VIR_AUTOCLOSE annotation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Currently the order of virshXXXFree functions in the header file
does not correspond to the order in the corresponding .c file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
The --nvram and --keep-nvram options of the undefine command can
be used regardless of the domain status (the only consumer so far
- qemuDomainUndefineFlags() doesn't care about the domain
status). Yet, their corresponding help strings say something
about inactive domains while manpage says nothing. Remove the
reference to domain state.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2007659
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
New 'update-memory-device' command is introduced which aims on
making it user friendly to change <memory/> device. So far I just
need to change <requested/> so I'm introducing --requested-size
only; but the idea is that this is extensible for other cases
too. For instance, want to change <myElement/>? A new
--my-element argument can be easily introduced.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As advertised in previous commit, this event is delivered to us
when virtio-mem module changes the allocation inside the guest.
It comes with one attribute - size - which holds the new size of
the virtio-mem (well, allocated size), in bytes.
Mind you, this is not necessarily the same number as 'requested
size'. It almost certainly will be when sizing the memory up, but
it might not be when sizing the memory down - the guest kernel
might be unable to free some blocks.
This current size is reported in the domain XML as an output
element only.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
I removed else branches after return/break as they are not
necessary and the code looks cleaner without them.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch also includes use of an early return in case of an
error. I think the changes make the functions more readable.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If there was added a new return value indicating success to the
function virDomainMigrateSetMaxDowntime() in the future, because
of the way the function is called it would be treated it as an
error state and would return false (indicating failure). This
patch fixes it, so that the call of the function follows the same
pattern as is currently set in libvirt.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Both function description and function itself mention check for
OOM which can't happen really. There was a bug in glib where
g_strdup_*() might have not aborted on OOM, but we have our own
implementation when dealing with broken glib (see
vir_g_strdup_printf()). Therefore, checking for OOM is redundant
and can never be true.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's check whether a boolean --option doesn't have completer or
completer_flags set. These options are just flags and don't
accept any value, thus they can't have any completer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If a command is an alias, then it can only have .name, .flags and
.alias set and .flags should contain just VSH_CMD_FLAG_ALIAS.
Check if that's the case in self-test.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The vol-download command takes mandatory --file argument which
points to a local (possibly non-existent) path. If the file
exists then it's overwritten. Set the argument's completer so
that self-test doesn't report it as missing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The screenshot command takes optional --file argument which can
point to an existing local path (in which case the file is
overwritten). Set the argument's completer so that self-test
doesn't report it as missing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch includes:
* removal of dead code
* simplifying nested if conditions
* removal of unnecessary variables
* usage of "direct" boolean return
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's now also used in vshCompleteHelpCommand which is outside of the
conditionally compiled code.
Fixes: 80f70c74a7
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Complete with the indexed targets (e.g. vda[3]) based on existing
indexes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For now this serves just as an annotation because readline and also the
bash completion script insist on completing local paths when an empty
list is returned.
This will serve for future reference once we'll be able to properly
refuse to suggest anything.
The completer is used for fields such as names for new objects,
description strings, password strings etc, URIs and hostnames which we
can't feasibly autocomplete.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For now the completion does the correct thing of completing a local path
if NULL is returned.
Introduce 'virshCompletePathLocalExisting' and use it in the
'VIRSH_COMMON_OPT_FILE' macro.
This for now serves as an annotation for the function which want to read
a file on the host running virsh. In the future this can be used with a
more sophisticated implementation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In cases such as the APIs for managed save management, the file path
provided via the '--file' option is passed to the API.
We'll need to make them distinct from cases for when virsh is using the
file so that different completers can be used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'--storage' of the 'undefine' command and '--migrate-disks' of the
'migrate' command take a list of disk targets as an argument.
We can simply combine 'virshDomainDiskTargetCompleter' with
'virshCommaStringListComplete' to provide the completions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Wrap 'vshReadlineCommandGenerator' into a function with proper prototype
to provide a completer for the help command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'--pool' of the 'pool-event' command and '--inputpool' of
'vol-create-from' use the above mentioned completer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When listing a snapshot tree, the '--from' option takes a name of a
snapshot to limit the subset. Use virshSnapshotNameCompleter as
completer for the option.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Make it simple to spot which options of which commands are missing
autocompletion functions by introducing this hidden option.
In the future when we'll have completers for everything this can be also
used as a hard fail so that completers are always added.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We don't need to validate the real command twice, but it's better to
check that the real command name exists and it's not an alias to prevent
loops.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce a proper flag 'VSH_CMD_FLAG_HIDDEN' for hiding commands from
output so that we can validate that there aren't any loops or
misconfigured commands.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Prevent the need to edit the function declarations to put them into the
header. There was even inconsistent use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Include the proper header instead of duplicating the declaration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
By doing so we can get rid of the code which violates our coding style
guidelines.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
I think these functions look much more readable with just simple
if conditions.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Rename the temp variable that is being returned and use automatic
pointer clearing for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
In case the specific VCPU states are not present in the XML we were
taking a fallback code path just noting that all cpus of the VM are
enabled.
This was broken by a mistake in a recent refactor where a 'goto cleanup'
was mistakenly replaced by a 'return NULL'. This broke reporting of cpus
and also caused a memory leak.
Return the fallback cpu map.
Fixes: bd1f40fe7d
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2004429
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
This is currently the only way to view the 'autostart' property for a
node device in virsh.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add ability to set node devices to autostart on boot or parent device
availability.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The domblklist command is designed to show a brief information
about the blocks of a domain. One piece of information that is
shows is "Target "and "Source". Before the modification, the
Vhost disk of SPDK is displayed as "-". After the modification,
the socket associated with it can be displayed.
Signed-off-by: dinglimin <dinglimin@cmss.chinamobile.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The variable is used inside a loop in which it's allocated in
each iteration. Bring it inside the loop so that g_autoptr()
kicks in each iteration.
Fixes: 3caa28dc50
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Recently, I wanted to attach an vhost-user interface but found
out that attach-interface command doesn't support it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Use 'g_strsplit' to split the strings and then concatenate back when the
escape sequence (',,') is used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a '--split' switch for the 'virsh echo' command and add few test
cases to the virshtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the need for temporary strings by filling the output buffer
directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Initialize the flags earlier and use VSH_EXCLUSIVE_OPTIONS_VAR to
declare the conflicting options as exclusive.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Note that it's for internal testing use and remove the manpage entry.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some variables are used in a loop and only freed in the cleanup
section because we need to be able to jump out of the loop.
Reduce their scope and free them automatically.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Use 'ostype' instead of generic 'str', to discourage
reuse. Also mark it as autofree.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Use automatic memory cleanup to get rid of the cleanup section,
and of the memory leak that happens inside the loop, because
cap, alloc and phy are only freed once per function.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Remove cleanup sections that are no longer needed, as well
as unnecessary 'ret' variables.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Do not use 'arg' which is later used for an allocated string.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Instead of using the same variable to store either a const pointer
or an allocated string, always make a copy.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Use virAppendElement instead of virInsertElementsN to implement
VIR_APPEND_ELEMENT which allows us to remove error handling as the
only relevant errors were removed when switching to aborting memory
allocation functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When we dropped virDomainSetMemory usage it got kind of tricky to
figure out the flags correctly.
Originally the logic was following:
no option | --current | --live | --config | --live --config
----------+-----------+--------+----------+----------------
LIVE | CURRENT | LIVE | CONFIG | LIVE & CONFIG
But after the commit removing virDomainSetMemory usage it changed to:
no option | --current | --live | --config | --live --config
----------+-----------+--------+-----------------+----------------
LIVE | CURRENT | LIVE | LIVE & CONFIG | LIVE & CONFIG
This commit fixes the logic back to the original behavior except for
ESX, HyperV and Virtuozzo drivers where virDomainSetMemory() default
behavior was CURRENT instead of LIVE.
Fixes: ce8138564b
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1980199
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow the tree view with --all so that we can see all inactive mdevs in
a tree structure nested under their parent devices.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
According to definition of virDomainCoreDumpFormat, the "elf" should be
the first argument in VIR_ENUM_*.
Fixes: 84cc4543be
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1981625
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
