Commit Graph

21298 Commits

Author SHA1 Message Date
Martin Kletzander
1794a0103a qemu: Don't crash when create fails early
Since commit 7140807917 we are generating
socket path later than before -- when starting a domain.  That makes one
particular inconsistent state of a chardev, which was not possible
before, currently valid.  However, SELinux security driver forgot to
guard the main restoring function by a check for NULL-paths.  So make it
no-op for NULL paths, as in the DAC driver.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1300532

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-02-03 11:01:42 +01:00
Erik Skultety
1fe6d8bfa8 cfg.mk: Adjust sc_prohibit_int_ijk to support 'exempt from syntax-check'
There might be cases, like with typed params, where triggering this check isn't
desirable. But including the whole module in the exception regex is not always
to right way of doing things. By adding an option to manually disable this check
on a specific occurrence, the module itself will still be checked against the
rule.
2016-02-03 10:58:01 +01:00
Dmitry Andreev
d2dabff3a0 qemuDomainResume: allow to resume domain with guest panicked
In case of guest panicked, preserved crashed domain has stopped CPUs.
It's not possible to use tools like WinDbg for the problem investigation
until we start CPUs back.
2016-02-03 10:33:48 +01:00
Nikolay Shirokovskiy
4a67b044fb qemu: return -1 on error paths in qemuDomainSaveImageStartVM
Error paths after sending the event that domain is started written as if ret = -1
which is set at the beginning of the function. It's common idioma to keep 'ret'
equal to -1 until the end of function where it is set to 0. But here we use ret
to keep result of restore operation too and thus breaks the idioma and its users :)

Let's use different variable to hold restore result.

Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
2016-02-03 10:27:35 +01:00
John Ferlan
6ec319b84f logical: Clean up allocation when building regex on the fly
Rather than a loop reallocating space to build the regex, just allocate
it once up front, then if there's more than 1 nextent, append a comma and
another regex_unit string.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-02-02 13:13:05 -05:00
John Ferlan
c6d526f33f logical: Use 'stripes' value for mirror/raid segtype
The 'stripes' value is described as the "Number of stripes or mirrors in
a logical volume". So add "mirror" and anything that starts with "raid"
to the list of segtypes that can have an 'nextents' value greater than one.
Use of raid segtypes (raid1, raid4, raid5*, raid6*, and raid10) is favored
over mirror in more recent lvm code.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-02-02 13:13:01 -05:00
John Ferlan
69267756d0 logical: Use VIR_APPEND_ELEMENT instead of VIR_REALLOC_N
Rather than preallocating a set number of elements, then walking through
the extents and adjusting the specific element in place, use the APPEND
macros to handle that chore.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-02-02 13:12:57 -05:00
Michal Privoznik
0d0e41a719 include: Handle case when builddir == srcdir
In my previous commit a70f3b1c77 I've tried to fix case
when building from VPATH and a file wasn't being installed.
However, my fix broke non-VPATH build.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-02-02 09:31:56 +01:00
Eric Blake
041f7c9304 tests: avoid realpath in test-lib.sh
Ever since commit ace4aecd, running 'make check' on RHEL 6 produces:

./test-lib.sh: line 21: realpath: command not found

for every shell script test, because 'realpath' was not part of
coreutils back then.

* tests/test-lib.sh (_scriptdir): Compute with only portable shell.

Signed-off-by: Eric Blake <eblake@redhat.com>
2016-02-01 13:03:28 -07:00
Michael Chapman
86c4df83b9 virsh: improve waiting for block job readiness
After a block job hits 100%, we only need to apply a timeout waiting for
a block job event if exactly one of the BLOCK_JOB or BLOCK_JOB_2
callbacks were able to be registered.

If neither callback could be registered, there's clearly no need for a
timeout.

If both callbacks were registered, then we're guaranteed to eventually
get one of the events. The path being used by virsh must be exactly the
source path or target device in the domain's disk definition, and these
are the respective strings sent back in these two events.

Signed-off-by: Michael Chapman <mike@very.puzzling.org>
2016-02-01 18:04:48 +01:00
Michael Chapman
8fa216bbb4 virsh: ensure SIGINT action is reset on all errors
If virTimeMillisNow() fails, the SIGINT action must be reset back to
its previous state.

Signed-off-by: Michael Chapman <mike@very.puzzling.org>
2016-02-01 18:04:48 +01:00
Michael Chapman
15dee2ef24 virsh: be consistent with style of loop exit
When waiting for a block job, the various statuses (COMPLETED, READY,
CANCELED, etc.) should all be treated consistently by having the loop be
exited with "break". Use "goto cleanup" for the error cases only, when
no block job status is available.

Signed-off-by: Michael Chapman <mike@very.puzzling.org>
2016-02-01 18:04:48 +01:00
Michael Chapman
704dfd6b0f virsh: avoid unnecessary progress updates
There is no need to call virshPrintJobProgress() unless the block job's
cur or end cursors have changed since the last iteration.

Signed-off-by: Michael Chapman <mike@very.puzzling.org>
2016-02-01 18:04:48 +01:00
Cole Robinson
92549b3b8a qemu: Mark some functions as static 2016-02-01 10:33:25 -05:00
Michal Privoznik
c779bf8f62 fdstream: Realign
Some lines in this file are misaligned which fires up my OCD.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-02-01 16:12:22 +01:00
Boris Fiuczynski
f73ad5d47e qemu: Align dump options for watchdog and on_crash events
Having on_crash set to either coredump-destroy or coredump-restart
creates core dumps with option memory-only in the directory specified
by auto_dump_path. When a watchdog is triggered with the action dump
the core dump is also placed into the directory specified by auto_dump_path
but is created without the option memory-only.

This patch sets the option memory-only also for core dumps created by the
watchdog event.

Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
2016-02-01 13:47:56 +01:00
Michal Privoznik
a70f3b1c77 includes: Install libvirt-common.h
The libvirt-common.h is build time generated file from .in.
Obviously, it's generated into builddir and not srcdir. Problem
is, the list of header files to install, virinc_HEADERS contains
only $(srcdir)/*.h and this misses libvirt-common.h. This problem
is pretty obvious when doing a VPATH build.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-01-30 11:55:45 +01:00
John Ferlan
63e15ad5e0 logical: Create helper virStorageBackendLogicalParseVolExtents
Create a helper routine in order to parse any extents information
including the extent size, length, and the device string contained
within the generated 'lvs' output string.

A future patch would then be able to avoid the code more cleanly

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-01-29 14:13:14 -05:00
Wido den Hollander
84678267e4 rbd: Open in Read-Only mode when refreshing a volume
By opening a RBD volume in Read-Only we do not register a
watcher on the header object inside the Ceph cluster.

Refreshing a volume only calls rbd_stat() which is a operation
which does not write to a RBD image.

This allows us to use a cephx user which has no write
permissions if we would want to use the libvirt storage pool
for informational purposes only.

It also saves us a write into the Ceph cluster which should
speed up refreshing a RBD pool.

rbd_open_read_only() is available in all librbd versions which
also support rbd_open().

Signed-off-by: Wido den Hollander <wido@widodh.nl>
2016-01-29 14:09:34 -05:00
Wido den Hollander
0b15f92032 rbd: Implement buildVolFrom using RBD cloning
RBD supports cloning by creating a snapshot, protecting it and create
a child image based on that snapshot afterwards.

The RBD storage driver will try to find a snapshot with zero deltas between
the current state of the original volume and the snapshot.

If such a snapshot is found a clone/child image will be created using
the rbd_clone2() function from librbd.

rbd_clone2() is available in librbd since Ceph version Dumpling (0.67) which
dates back to August 2013.

It will use the same features, strip size and stripe count as the parent image.

This implementation will only create a single snapshot on the parent image if
never changes. This reduces the amount of snapshots created for that RBD image
which benefits the performance of the Ceph cluster.

During build the decision will be made to use either rbd_diff_iterate() or
rbd_diff_iterate2().

The latter is faster, but only available on Ceph versions after 0.94 (Hammer).

Cloning is only supported if RBD format 2 is used. All images created by libvirt
are already format 2.

If a RBD format 1 image is used as the original volume the backend will report
a VIR_ERR_OPERATION_UNSUPPORTED error.

Signed-off-by: Wido den Hollander <wido@widodh.nl>
2016-01-29 11:11:51 -05:00
Wido den Hollander
34872ca461 rbd: Add support for wiping RBD volumes using TRIM.
Using VIR_STORAGE_VOL_WIPE_ALG_TRIM a RBD volume can be trimmed down
to 0 bytes using rbd_discard()

Effectively all the data on the volume will be lost/gone, but the volume
remains available for use afterwards.

Starting at offset 0 the storage pool will call rbd_discard() in stripe
size * count increments which is usually 4MB. Stripe size being 4MB and
count 1.

rbd_discard() is available since Ceph version Dumpling (0.67) which dates
back to August 2013.

Signed-off-by: Wido den Hollander <wido@widodh.nl>
2016-01-29 11:11:32 -05:00
Wido den Hollander
63cdc92f04 storage: Add TRIM algorithm to storage volume API
This new algorithm adds support for wiping volumes using TRIM.

It does not overwrite all the data in a volume, but it tells the
backing storage pool/driver that all bytes in a volume can be
discarded.

It depends on the backing storage pool how this is handled.

A SCSI backend might send UNMAP commands to remove all data present
on a LUN.

A Ceph backend might use rbd_discard() to instruct the Ceph cluster
that all data on that RBD volume can be discarded.

Signed-off-by: Wido den Hollander <wido@widodh.nl>
2016-01-29 11:09:14 -05:00
Wido den Hollander
f226ecbfbb rbd: Add support for wiping RBD volumes
When wiping the RBD image will be filled with zeros started
at offset 0 and until the end of the volume.

This will result in the RBD volume growing to it's full allocation
on the Ceph cluster. All data on the volume will be overwritten
however, making it unavailable.

It does NOT take any RBD snapshots into account. The original data
might still be in a snapshot of that RBD volume.

Signed-off-by: Wido den Hollander <wido@widodh.nl>
2016-01-29 10:42:36 -05:00
Wido den Hollander
69535c6124 storage: Adjust fix virStorageBackendVolWipeLocal switch
Use the cast of (virStorageVolWipeAlgorithm) adding the missing case:'s
(VIR_STORAGE_VOL_WIPE_ALG_ZERO and VIR_STORAGE_VOL_WIPE_ALG_LAST).

Additionally, the old code would also still run the SCRUB command on
default since it didn't go to cleanup when a invalid flag was supplied.
We now go to cleanup and exit if a invalid flag would be provided.

Signed-off-by: Wido den Hollander <wido@widodh.nl>
2016-01-29 10:24:20 -05:00
John Ferlan
680030c42b logical: Fix comment examples for virStorageBackendLogicalFindLVs
When commit id '82c1740a' made changes to the output format (changing from
using a ',' separator to '#'), the examples in the lvs output from the
comments weren't changed.

Additionally, the two new fields added ('segtype' and 'stripes') were
not included in the output, leaving it well confusing.

This patch fixes the sample output, adds a 'striped' example, and makes
other comment related adjustments for long line and spacing between followup
'NB' remarks (while I'm there).

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-01-28 16:50:46 -05:00
Andrea Bolognani
11ef5869fb pci: Use bool return type for some virPCIDeviceGet*() functions
The affected functions are:

  virPCIDeviceGetManaged()
  virPCIDeviceGetUnbindFromStub()
  virPCIDeviceGetRemoveSlot()
  virPCIDeviceGetReprobe()

Change their return type from unsigned int to bool: the corresponding
members in struct _virPCIDevice are defined as bool, and even the
corresponding virPCIDeviceSet*() functions take a bool value as input
so there's no point in these functions having unsigned int as return
type.

Suggested-by: John Ferlan <jferlan@redhat.com>
2016-01-28 17:27:58 +01:00
Michal Privoznik
3f3f7a824c gendispatch: Don't output spaces on empty line
In our generator for some code we put empty lines in the output
to separate blocks of code. However, in some cases we put couple
of spaces on the empty line too. It's not bug, it just isn't
nice.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-01-28 17:10:54 +01:00
Andrea Bolognani
171607296d pci: Add debug messages when unbinding from stub driver
Unbinding a PCI device from the stub driver can require several steps,
and it can be useful for debugging to be able to trace which of these
steps are performed and which are skipped for each device.
2016-01-28 12:20:53 +01:00
Andrea Bolognani
771eaeb2b3 pci: Phase out virPCIDeviceReattachInit()
The name is confusing, and there are just two uses: one is a test case,
and the other will be removed as part of an upcoming refactoring of
the hostdev code.
2016-01-28 11:31:28 +01:00
Peter Krempa
d773b57d22 qemu: don't iterate vcpus using priv->nvcpupids in qemuProcessSetSchedParams
This should be the last offender.
2016-01-28 09:58:24 +01:00
Peter Krempa
763941749e conf: disallow empty cpuset for emulatorpin
It's disallowed in the API.
2016-01-27 17:27:54 +01:00
Peter Krempa
31b782a147 conf: disallow empty cpusets for vcpu pinning when parsing XML
They are disallowed in the pinning API and as default cpuset.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1293241
2016-01-27 17:27:54 +01:00
Peter Krempa
414b7eeae9 qemu: Don't use priv->ncpus to iterate cgroup setting
Iterate over all cpus skipping inactive ones.
2016-01-27 17:27:54 +01:00
Andrea Bolognani
d87f0c0052 virnetdevopenvswitch: Don't call strlen() twice on the same string
Commit 871e10f fixed a memory corruption error, but called strlen()
twice on the same string to do so. Even though the compiler is
probably smart enough to optimize the second call away, having a
single invocation makes the code slightly cleaner.

Suggested-by: Michal Privoznik <mprivozn@redhat.com>
2016-01-27 13:01:24 +01:00
Michal Privoznik
720bc953f8 virnetdevmacvlan: Provide stubs for build without macvtap
In 370608b4c7 we have introduced two new internal APIs.
However, there are no stubs for build without macvtap. Therefore
build on systems lacking macvtap support (e.g. mingw or freebds)
fails when trying to link.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-01-27 10:07:46 +01:00
Jason J. Herne
871e10fc95 Fix libvirtd free() segfault when migrating guest with deleted open vswitch port
libvirtd crashes on free()ing portData for an open vswitch port if that port
was deleted.  To reproduce:

ovs-vsctl del-port vnet0
virsh migrate --live kvm1 qemu+ssh://dstHost/system

Error message:
libvirtd: *** Error in `/usr/sbin/libvirtd': free(): invalid pointer: 0x000003ff90001e20 ***

The problem is that virCommandRun can return an empty string in the event that
the port being queried does not exist. When this happens then we are
unconditionally overwriting a newline character at position strlen()-1. When
strlen is 0, we overwrite memory that does not belong to the string.

The fix: Only overwrite the newline if the string is not empty.

Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
2016-01-27 10:01:58 +01:00
Laine Stump
370608b4c7 util: keep/use a bitmap of in-use macvtap devices
This patch creates two bitmaps, one for macvlan device names and one
for macvtap. The bitmap position is used to indicate that libvirt is
currently using a device with the name macvtap%d/macvlan%d, where %d
is the position in the bitmap. When requested to create a new
macvtap/macvlan device, libvirt will now look for the first clear bit
in the appropriate bitmap and derive the device name from that rather
than just starting at 0 and counting up until one works.

When libvirtd is restarted, the qemu driver code that reattaches to
active domains calls the appropriate function to "re-reserve" the
device names as it is scanning the status of running domains.

Note that it may seem strange that the retry counter now starts at
8191 instead of 5. This is because we now don't do a "pre-check" for
the existence of a device once we've reserved it in the bitmap - we
move straight to creating it; although very unlikely, it's possible
that someone has a running system where they have a large number of
network devices *created outside libvirt* named "macvtap%d" or
"macvlan%d" - such a setup would still allow creating more devices
with the old code, while a low retry max in the new code would cause a
failure. Since the objective of the retry max is just to prevent an
infinite loop, and it's highly unlikely to do more than 1 iteration
anyway, having a high max is a reasonable concession in order to
prevent lots of new failures.
2016-01-26 12:20:04 -05:00
Leno Hou
8c70d04bab util: increase libnl buffer size
In the following cases nl_recv() was returning the error "No buffer
space available":

* When switching CPUs to offline/online in a system more than 128 cpus
* When using virsh to destroy domain in a system with many interfaces

This patch sets the buffer size for all netlink sockets created by
libnl to 128K and turns on message peeking for nl_recv(). This
eliminates the "No buffer space available" errors seen in the cases
above, and also preempts other future errors the smaller buffers could
have caused.

Signed-off-by: Leno Hou <houqy@linux.vnet.ibm.com>
Signed-off-by: Laine Stump <laine@laine.org>
2016-01-26 12:20:04 -05:00
Pavel Hrdina
36785c7e77 device: cleanup input device code
The current code was a little bit odd.  At first we've removed all
possible implicit input devices from domain definition to add them later
back if there was any graphics device defined while parsing XML
description.  That's not all, while formating domain definition to XML
description we at first ignore any input devices with bus different to
USB and VIRTIO and few lines later we add implicit input devices to XML.

This seems to me as a lot of code for nothing.  This patch may look
to be more complicated than original approach, but this is a preferred
way to modify/add driver specific stuff only in those drivers and not
deal with them in common parsing/formating functions.

The update is to add those implicit input devices into config XML to
follow the real HW configuration visible by guest OS.

There was also inconsistence between our behavior and QEMU's in the way,
that in QEMU there is no way how to disable those implicit input devices
for x86 architecture and they are available always, even without graphics
device.  This applies also to XEN hypervisor.  VZ driver already does its
part by putting correct implicit devices into live XML.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-01-26 17:53:33 +01:00
Pavel Hrdina
2686e44e05 tests: add some missing tests to qemuxml2xmltest
Those tests are in qemuargv2xmltest and it makes sense to include them
also in qemuxml2xmltest and qemuxml2argvtest.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-01-26 17:53:33 +01:00
Pavel Hrdina
2d446b6eeb tests: use virtTestDifferenceFull in tests where we have output file
This will enable regenerate functionality for those tests to make
developer lives easier while updating tests.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-01-26 17:53:33 +01:00
Michal Privoznik
c7f5e26b5f vircgroup: Finish renaming of virCgroupIsolateMount
In dc576025c3 we renamed virCgroupIsolateMount function to
virCgroupBindMount. However, we forgot about one occurrence in
section of the code which provides stubs for platforms without
support for CGroups like *BSD for instance.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-01-26 17:39:47 +01:00
Daniel P. Berrange
dc576025c3 lxc: don't try to hide parent cgroups inside container
On the host when we start a container, it will be
placed in a cgroup path of

   /machine.slice/machine-lxc\x2ddemo.scope

under /sys/fs/cgroup/*

Inside the containers' namespace we need to setup
/sys/fs/cgroup mounts, and currently will bind
mount /machine.slice/machine-lxc\x2ddemo.scope on
the host to appear as / in the container.

While this may sound nice, it confuses applications
dealing with cgroups, because /proc/$PID/cgroup
now does not match the directory in /sys/fs/cgroup

This particularly causes problems for systems and
will make it create repeated path components in
the cgroup for apps run in the container eg

  /machine.slice/machine-lxc\x2ddemo.scope/machine.slice/machine-lxc\x2ddemo.scope/user.slice/user-0.slice/session-61.scope

This also causes any systemd service that uses
sd-notify to fail to start, because when systemd
receives the notification it won't be able to
identify the corresponding unit it came from.
In particular this break rabbitmq-server startup

Future kernels will provide proper cgroup namespacing
which will handle this problem, but until that time
we should not try to play games with hiding parent
cgroups.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-01-26 16:11:32 +00:00
Daniel P. Berrange
511e7c5bba qemu: add reporting of vCPU wait time
The VIR_DOMAIN_STATS_VCPU flag to virDomainListGetStats
enables reporting of stats about vCPUs. Currently we
only report the cumulative CPU running time and the
execution state.

This adds reporting of the wait time - time the vCPU
wants to run, but the host scheduler has something else
running ahead of it.

The data is reported per-vCPU eg

$ virsh domstats --vcpu demo
 Domain: 'demo'
   vcpu.current=4
   vcpu.maximum=4
   vcpu.0.state=1
   vcpu.0.time=1420000000
   vcpu.0.wait=18403928
   vcpu.1.state=1
   vcpu.1.time=130000000
   vcpu.1.wait=10612111
   vcpu.2.state=1
   vcpu.2.time=110000000
   vcpu.2.wait=12759501
   vcpu.3.state=1
   vcpu.3.time=90000000
   vcpu.3.wait=21825087

In implementing this I notice our reporting of CPU execute
time has very poor granularity, since we are getting it
from /proc/$PID/stat. As a future enhancement we should
prefer to get CPU execute time from /proc/$PID/schedstat
or /proc/$PID/sched (if either exist on the running kernel)

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-01-26 14:34:23 +00:00
Luyao Huang
985f01a65f virsh: fix cpu-stats command output format issue
After commit 57177f1, the cpu-stats command format change to:

CPU0:
    cpu_time         14401.507878990 seconds
    vcpu_time    14378732785511

vcpu_time is not user friendly. After this patch, it will
change back:
CPU0:
    cpu_time         14401.507878990 seconds
    vcpu_time        14378.732785511 seconds

https://bugzilla.redhat.com/show_bug.cgi?id=1301807

Signed-off-by: Luyao Huang <lhuang@redhat.com>
2016-01-26 09:23:49 +01:00
Peter Krempa
356e28b35e util: buffer: Sanitize comment for virBufferAddBuffer
Idioms are usually weird and obscure when translated literally.
2016-01-25 17:53:08 +01:00
Peter Krempa
7141fc7a27 test: Touch up error message when attempting to pin invalid vCPU
Report
error: invalid argument: requested vcpu '100' is not present in the domain
instead of
error: invalid argument: requested vcpu is higher than allocated vcpus
2016-01-25 17:53:08 +01:00
Peter Krempa
f82a8014c0 tests: qemuxml2xml: Order pinning information numerically
A future patch will refactor the storage of the pinning information in a
way where the ordering will be lost. Order them numerically to avoid
changing the tests later.
2016-01-25 17:53:07 +01:00
Peter Krempa
a2e80549a2 virsh: cpu-stats: Remove unneeded flags
virDomainGetCPUStats doesn't support flags so there's no need to carry
the 'flags' variable around. Additionally since the API is poorly
designed I doubt that it will be extended.
2016-01-25 17:45:09 +01:00
Peter Krempa
57177f1abd virsh: cpu-stats: Extract common printing code into a function
Simplify the code by extracting a common code path.
2016-01-25 17:45:09 +01:00