Previously we generated all source files into $srcdir which is no
longer true. This means that we can't just blindly prepend each
source file with $srcdir.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Previously we generated all source files into $srcdir which is no
longer true. This means that we can't just blindly prepend each
source file with $srcdir.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When libvirt first implemented a stable and configurable MAC address
for the bridges created for libvirt virtual networks (commit
5754dbd56d, in libvirt v0.8.8) most distro stable releases didn't
support explicitly setting the MAC address of a bridge; the bridge
just always assumed the lowest numbered MAC of all attached
interfaces. Because of this, we stabilized the bridge MAC address by
creating a "dummy" tap interface with a MAC address guaranteed to be
lower than any of the guest tap devices' MACs (which all started with
0xFE, so it's not difficult to do) and attached it to the bridge -
this was the inception of the "virbr0-nic" device that has confused so
many people over the years.
Even though the linux kernel had recently gained support for
explicitly setting a bridge MAC, we deemed it unnecessary to set the
MAC that way, because the other (indirect) method worked everywhere.
But recently there have been reports that the bridge MAC address was
not following the setting in the network config, and mismatched the
MAC of the dummy tap device (which was still correct). It turns out
that this is due to a change in systemd-242 that persists whatever MAC
address is set for a bridge when it's initially started. According to
the systemd NEWS file entry for version 242
(https://github.com/systemd/systemd/blob/master/NEWS):
"if a bridge interface is created without any slaves, and gains
a slave later, then now the bridge does not inherit slave's MAC."
This change was the result of:
https://github.com/systemd/systemd/issues/3374
(apparently if there is no MAC saved for a bridge by the name of a
bridge being created, the random MAC generated during creation is
saved, and then that same MAC is used to explicitly set the MAC each
time it is created). Once a bridge has an explicitly set MAC, the "use
the lowest numbered MAC of attached devices" rule is ignored, so our
dummy tap device is like the goggles - it does nothing! (well, almost).
We could whine about changes in default behavior, etc. etc., but
because the change was in response to actual user problems, that seems
likely a fruitless task. Fortunately, time has marched on, and even
distro releases that are old enough that they are no longer supported
by upstream libvirt (e.g. RHEL6) have support for explicitly setting a
bridge device MAC address, either during creation or with a separate
ioctl after creation, so we can now do that.
To enable explicitly setting the mac during bridge creation, we add a
mac arg to virNetDevBridgeCreate(). In the case of platforms where
the bridge is created with a netlink RTM_NEWLINK message, we just add
that mac to the message. For platforms that still use an ioctl (either
SIOCBRADDBR or SIOCIFCREATE2), we make a separate call to
virNetDevSetMAC() after creating the bridge.
(NB: I was unable to test the calling of virNetDevSetMAC() from the
SIOCIFCREATE2 (BSD) version of virNetDevBridgeCreate(); even though I
managed to get a FreeBSD system setup and libvirt built there, when I
tried to start the default network the SIOCIFCREATE2 ioctl itself
failed, so it never even got to the virNetDevSetMAC(). That leaves the
FreeBSD implementation untested.)
This makes the dummy tap pointless for purposes of setting the MAC
address, but it is still useful for IPv6 DAD initialization (which
apparently requires at least one interface to be attached to the
bridge and online), as well as for setting an initial MTU for the
bridge, so it hasn't been removed.
(NB: we can safely *always* call virNetDevBridgeCreate() with
&def->mac from the network driver because, in spite of the existence
of a "mac_specified" bool in the config suggesting that it may not
always be present, in reality a mac address will always be added to
any network that doesn't have one - this is guaranteed in all cases by
commit a47ae7c004)
https://bugzilla.redhat.com/show_bug.cgi?id=1760851
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The function now does not return an error so we can drop it fully.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In few places we have the following code pattern:
int ret;
... /* @ret is not accessed here */
ret = f(...);
return ret;
This pattern can be written less verbose:
...
return f(...);
This patch was generated with following coccinelle spatch:
@@
type T;
constant C;
expression f;
identifier ret;
@@
-T ret = C;
... when != ret
-ret = f;
-return ret;
+return f;
Afterwards I needed to fix a few places, e.g. comment in
virDomainNetIPParseXML() was removed too because coccinelle
thinks it refers to @ret while in fact it doesn't. Also in few
places it replaced @ret declaration with a few spaces instead of
removing the line. But nothing terribly wrong.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all the occurrences of
ignore_value(VIR_STRDUP(a, b));
with
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While the default iptables setup used by Fedora/RHEL distros
only restricts traffic on the INPUT and/or FORWARD rules,
some users might have custom firewalls that restrict the
OUTPUT rules too.
These can prevent DHCP/DNS/TFTP responses from dnsmasq
from reaching the guest VMs. We should thus whitelist
these protocols in the OUTPUT chain, as well as the
INPUT chain.
Signed-off-by: Malina Salina <malina.salina@protonmail.com>
Initial patch then modified to add unit tests and IPv6
support
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The use of $(AUG_GENTEST) as a dependency in the makefiles is
a problem because this was assumed to be the filename of the
script, but is in fact a full shell command line.
Split it into two variables, so it can be correctly used for
dependencies.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOPTR aliases to g_autoptr. Replace all of its use by the GLib
macro version.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOFREE is just an alias for g_autofree. Use the GLib macros
directly instead of our custom aliases.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Also define the macro for building with GLib older than 2.60
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove all usage of ATTRIBUTE_NORETURN in favor of GLib's
G_GNUC_NORETURN.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The usleep function was missing on older mingw versions, but we can rely
on it existing everywhere these days. It may only support times upto 1
second in duration though, so we'll prefer to use g_usleep instead.
The commandhelper program is not changed since that can't link to glib.
Fortunately it doesn't need to build on Windows platforms either.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add the main glib.h to internal.h so that all common code can use it.
Historically glib allowed applications to register an alternative
memory allocator, so mixing g_malloc/g_free with malloc/free was not
safe.
This was feature was dropped in 2.46.0 with:
commit 3be6ed60aa58095691bd697344765e715a327fc1
Author: Alexander Larsson <alexl@redhat.com>
Date: Sat Jun 27 18:38:42 2015 +0200
Deprecate and drop support for memory vtables
Applications are still encourged to match g_malloc/g_free, but it is no
longer a mandatory requirement for correctness, just stylistic. This is
explicitly clarified in
commit 1f24b36607bf708f037396014b2cdbc08d67b275
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Thu Sep 5 14:37:54 2019 +0100
gmem: clarify that g_malloc always uses the system allocator
Applications can still use custom allocators in general, but they must
do this by linking to a library that replaces the core malloc/free
implemenentation entirely, instead of via a glib specific call.
This means that libvirt does not need to be concerned about use of
g_malloc/g_free causing an ABI change in the public libary, and can
avoid memory copying when talking to external libraries.
This patch probes for glib, which provides the foundation layer with
a collection of data structures, helper APIs, and platform portability
logic.
Later patches will introduce linkage to gobject which provides the
object type system, built on glib, and gio which providing objects
for various interesting tasks, most notably including DBus client
and server support and portable sockets APIs, but much more too.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1755303
With the recent work in daemon split and socket activation
daemons can come and go. They can and will be started many times
during a session which results in objects being autostarted
multiple times. This is not optimal. Use
virDriverShouldAutostart() to determine if autostart should be
done or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
define a VIR_DEFINE_AUTOPTR_FUNC() to autofree virNetworkPortDefs, and
convert all uses of virNetworkPortDefPtr that are appropriate to use
it.
This coincidentally fixes multiple potential memory leaks (in failure
cases) in networkPortCreateXML()
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The filename match rule was accidentally excluding the
Makefile.inc.am files from the long lines check.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Neither virThreadInitialize or virThreadOnExit do anything since we
dropped the Win32 threads impl, in favour of win-pthreads with:
commit 0240d94c36
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Jan 22 16:17:10 2014 +0000
Remove windows thread implementation in favour of pthreads
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To aid in troubleshooting add some debug messages wrt
bandwidth settings and networks.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We previously allowed bandwidth settings when attaching NICs
to networks with forward mode=bridge:
commit 42a92ee93d
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Tue Nov 20 11:30:05 2018 +0000
network: add missing bandwidth limits for bridge forward type
In the case of a network with forward=bridge, which has a bridge device
listed, we are capable of setting bandwidth limits but fail to call the
function to register them.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Unfortunately the wrong version of this patch was posted and
reviewed and thus it lacked the code to actually apply the
bandwidth settings to the bridge itself.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since the introduction of the virNetworkPort object, the network driver
has a persistent record of ports that have been created against the
networks. Thus the hypervisor drivers no longer communicate to the
network driver during libvirtd restart.
This change, however, meant that the connection usage counts were
no longer re-initialized during a libvirtd restart. To deal with this we
must iterate over all virNetworkPortDefPtr objects we have and invoke
the notify callback to record the connection usage count.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All code using LOCALSTATEDIR "/run" is updated to use RUNSTATEDIR
instead. The exception is the remote driver client which still
uses LOCALSTATEDIR "/run". The client needs to connect to remote
machines which may not be using /run, so /var/run is more portable
due to the /var/run -> /run symlink.
Some duplicate paths in the apparmor code are also purged.
There's no functional change by default yet since both expressions
expand to the same value.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Creating various directories using $(runstatedir) instead of
$(localstatedir)/run.
There's no functional change by default yet since both expressions
expand to the same value.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Store the namespace URI as const char*, instead of in a function.
Suggested-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
There is no need to copy and paste the same types pointing
to void all over the place.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
virErrorPreserveLast()/virErrorRestore() (added in commit 8333e7455
back in 2017), do a better better job of saving and restoring the last
libvirt error than virSaveLastError()/virErrorRestore() (they're
simpler, and they also save/restore the system errno).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
During networkPortCreateXML, if networkAllocatePort() failed,
networkReleasePort() would be called, which would (in the case of
network pools of macvtap passthrough devices) attempt to find the
allocated device by comparing port->plug.direct.linkdev to each device
in the pool. Since port->plug.direct.linkdev was still NULL, the
attempted strcmp would result in a SEGV.
Calling networkReleasePort() during error cleanup is something that
should only be done if networkAllocatePort() has already succeeded. It
turns out there is one other possible error exit from
networkPortCreateXML() that happens after networkAllocatePort() has
succeeded, so the code to call networkReleasePort() was just moved
down to there.
Resolves: https://bugzilla.redhat.com/1741390
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The virtnetworkd daemon will be responsible for providing the network API
driver functionality. The network driver is still loaded by the main
libvirtd daemon at this stage, so virtnetworkd must not be running at
the same time.
Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When running in libvirtd, we are happy for any of the drivers to simply
skip their initialization in virStateInitialize, as other drivers are
still potentially useful.
When running in per-driver daemons though, we want the daemon to abort
startup if the driver cannot initialize itself, as the daemon will be
useless without it.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use the correct enum constant when validating vlan usage.
This fixes a merge error in
commit 6cb0ec48bd
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Mon Sep 3 17:34:22 2018 +0100
network: convert networkAllocateActualDevice to virNetworkPortDef
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that 100% of libvirt code is forbidden in a SUID environment,
we no longer need to worry about whether env variables are
trustworthy or not. The virt-login-shell setuid program, which
does not link to any libvirt code, will purge all environment
variables, except $TERM, before invoking the virt-login-shell-helper
program which uses libvirt.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since fb9f6ce625 we are including a libxml header file in the
network driver but never link with it. This hasn't caused an
immediate problem because in the end the network driver links
with libvirt.la. But apparently, it's causing a build issue on
old Ubuntu.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Pass an xmlopt argument through all the needed network conf
functions, like is done for domain XML handling. No functional
change for now
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Just a stub for now that is unused. Add init+cleanup plumbing and
demostrate it in bridge_driver.c
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
When the drivers acquire their pidfile lock we don't want to wait if the
lock is already held. We need the driver to immediately report error,
causing the daemon to exit.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When we allow multiple instances of the driver for the same user
account, using a separate root directory, we need to ensure mutual
exclusion. Use a pidfile to guarantee this.
In privileged libvirtd this ends up locking
/var/run/libvirt/network/driver.pid
In unprivileged libvirtd this ends up locking
/run/user/$UID/libvirt/network/run/driver.pid
NB, the latter can vary depending on $XDG_RUNTIME_DIR
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The sys/sysctl.h header is only needed on BSD platforms to get
the sysctlbyname() function declaration. On Linux we talk to
procfs instead to change sysctls.
Unfortunately a legacy sys/sysctl.h header does exist on Linux
and including it has recently started triggering a deprecation
warning from glibc.
Protect its inclusion with a HAVE_SYSCTLBYNAME check instead
so that it only gets used on platforms where we need that
function declaration.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Change the domain conf so invoke the new network port public APIs instead
of the network callbacks.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This initial implementation just wires up the APIs and does tracking of
the port XML definitions. It is not yet integrated into the resource
allocation logic.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Separate network port bandwidth update code from the domain driver
network callback implementation.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Separate network port deletion code from the domain driver network
callback implementation.
Reivewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Separate network port notification code from the domain driver network
callback implementation.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Separate network port allocation code from the domain driver network
callback implementation.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The current qemu driver code for changing bandwidth on a NIC first asks
the network driver if the change is supported, then changes the
bandwidth on the VIF, and then tells the network driver to update the
bandwidth on the bridge.
This is potentially racing if a parallel API call causes the network
driver to allocate bandwidth on the bridge between the check and the
update phases.
Change the code to just try to apply the network bridge update
immediately and rollback at the end if something failed.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When (un)plugging an interface into a network, the 'plugged'
and 'unplugged' operations are invoked in the hook script.
The data provided to the script contains the network XML, the
domain XML and the domain interface XML. When we strictly split the
drivers up this will no longer be possible and thus breakage is
unavoidable. The hook scripts are not considered to be covered by the
API guarantee so this is OK.
To avoid existing scripts taking the wrong action, the existing
operations are changed to 'port-created' and 'port-deleted'
instead. These will receive the network XML and the network port
XML.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Convert the virDomainNetDef object into a virNetworkPortDef object
at the start of networkReleaseActualDevice. This largely decouples
the method impl from the domain object type.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Convert the virDomainNetDef object into a virNetworkPortDef object
at the start of networkNotifyActualDevice. This largely decouples
the method impl from the domain object type.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Convert the virDomainNetDef object into a virNetworkPortDef object
at the start of networkAllocateActualDevice. This largely decouples
the method impl from the domain object type.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Stop passing a virDomainNetDefPtr parameter to networkLogAllocation,
instead just pass in the MAC address. The actual device type is also not
required, since virNetworkForwardIfDefPtr has a type field that can be
used instead.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Creating firewall rules for the virtual networks causes the kernel to
load the conntrack module. This imposes a significant performance
penalty on Linux network traffic. Thus we want to only take that hit if
we actually have virtual networks running.
We need to create global firewall rules during startup in order to
"upgrade" rules for any running networks created by older libvirt.
If no running networks are present though, we can safely delay setup
until the time we actually start a network.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Pull the logic for creating global iptables chains into a separate
method and protect its invocation with virOnce, to make it possible
to reuse it in non-startup paths.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In attempt to getting rid of errN labels let's start with the
most upper one and rename it to 'error'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Various binaries are statically linking to libvirt_util.la and
other intermediate libraries we build. These intermediate libs
all get built into the main libvirt.so shared library eventually,
so we can dynamically link to that instead and reduce the on disk
footprint.
In libvirt-daemon RPM:
virtlockd: 1.6 MB -> 153 KB
virtlogd: 1.6 MB -> 157 KB
libvirt_iohelper: 937 KB -> 23 KB
In libvirt-daemon-driver-network RPM:
libvirt_leaseshelper: 940 KB -> 26 KB
In libvirt-daemon-driver-storage-core RPM:
libvirt_parthelper: 926 KB -> 21 KB
IOW, about 5.6 MB total space saving in a build done on Fedora 30
x86_64 architecture.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This caused the live XML to report the 'bridge' type instead of the
'network' type, which is a behavioural regression.
It also breaks 'virsh domif-setlink', 'virsh update-device' and
'virsh domiftune'
This reverts commit 518026e159.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If there's an error when setting up QoS on a bridge the control
jumps over to 'err5' label. Here, the virNetDevBandwidthClear()
is called to clear out any partially set QoS. This function can
also report an error which would overwrite the actual error that
caused us jumping here. Use virErrorPreserveLast() to preserve
the original error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Replaced usage of virSaveLastError and virSetError/virFreeError with
virErrorPreserveLast and virErrorRestore respectively.
Signed-off-by: Syed Humaid <syedhumaidbinharoon@gmail.com>
During initial NIC setup the hypervisor drivers are responsible for
attaching the TAP device to the bridge device. Any fixup after libvirtd
restarts should thus also be their responsibility.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Ports allocated on virtual networks with type=nat|route|open all get
given an actual type of 'network'.
Only ports in networks with type=bridge use an actual type of 'bridge'.
This distinction makes little sense since the virtualization drivers
will treat both actual types in exactly the same way, as they're all
just bridge devices a VM needs to be connected to.
This doesn't affect user visible XML since the "actual" device XML
is internal only, but we need code to convert the data upgrades.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reword error messages to make it clear that the combined floor settings
of all NICs are exceeding the network inbound peak/average
settings. Including the actual values being checked helps to diagnose
what is actually wrong.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In extreme cases libvirt can get mixed up about what VMs are running and
attached to a network leading to the cached floor sum value being
outdated. When this happens the only option is to destroy the network
and then restart libvirtd. If we set floor sum back to zero when
starting the network, we avoid the need for a libvirtd restart at least.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The networkPlugBandwidth & networkUnplugBandwidth methods currently take
a virDomainNetDefPtr. To remove the dependency on the domain config
struct, pass individual parameters instead.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All but one of the network types supports port profiles. Rather than
duplicating the code to merge profiles 3 times, do it once and then
later report an error if used from the wrong place.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Switch over to use the new API for re-attaching the bridge device
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In the case of a network with forward=bridge, which has a bridge device
listed, we are capable of setting bandwidth limits but fail to call the
function to register them.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
hostdevs have a link back to the original network device. This is fairly
generic accepting any type of device, however, we don't intend to make
use of this approach in future. It can thus be specialized to network
devices.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The actual network def was updated to save the bridge name back
in 1.2.11:
commit a360912179
Author: Laine Stump <laine@laine.org>
Date: Fri Nov 21 12:20:37 2014 -0500
network: save bridge name in ActualNetDef when actualType==network too
The chance that someone is running libvirt < 1.2.11 and wants
todo a live upgrade to 5.3.0 without a host reboot is essentially
zero. We can thus reasonably drop the back compat code now.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The APIs for allocating/notifying/removing network ports just take
an internal domain interface struct right now. As a step towards
turning these into public facing APIs, add a virNetworkPtr argument
to all of them.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The port allocation APIs are currently called unconditionally for all
types of NIC, but (mostly) only do anything for NICs with type=network.
The exception is the port allocate API which does some validation even
for NICs with type!=network. Relying on this validation is flawed,
however, since the network driver may not even be installed. IOW virt
drivers must not delegate validation to the network driver for NICs
with type != network.
This change allows us to report errors when the virtual network driver
is not registered.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The network driver used to reload the firewall rules whenever a dbus
NameOwnerChanged message for org.fedoraproject.FirewallD1 was
received. Presumably at some point in the past this was successful at
reloading our rules after a firewalld restart. Recently though I
noticed that once firewalld was restarted, libvirt's logs would get this
message:
The name org.fedoraproject.FirewallD1 was not provided by any .service files
After this point, no networks could be started until libvirtd itself
was restarted.
The problem is that the NameOwnerChanged message is sent twice during
a firewalld restart - once when the old firewalld is stopped, and
again when the new firewalld is started. If we try to reload at the
point the old firewalld is stopped, none of the firewalld dbus calls
will succeed.
The solution is to check the new_owner field of the message - we
should reload our firewall rules only if new_owner is non-empty (it is
set to "" when firewalld is stopped, and some sort of epoch number
when it is again started).
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since:
commit 9f4e35dc73
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Mon Mar 18 17:31:21 2019 +0000
network: improve error report when firewall chain creation fails
We cache an error when failing to create the top level firewall chains.
This commit failed to account for fact that we may invoke
networkPreReloadFirewallRules() many times while libvirtd is running.
For example when firewalld is restarted.
When this happens the original failure may no longer occurr and we'll
successfully create our top level chains. We failed to clear the cached
error resulting in us failing to start virtual networks.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Vim has trouble figuring out the filetype automatically because
the name doesn't follow existing conventions; annotations like
the ones we already have in Makefile.ci help it out.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Standardize on putting the _LAST enum value on the second line
of VIR_ENUM_IMPL invocations. Later patches that add string labels
to VIR_ENUM_IMPL will push most of these to the second line anyways,
so this saves some noise.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This reverts commit a5e1602090.
Getting rid of unistd.h from our headers will require more work than
just fixing the broken mingw build. Revert it until I have a more
complete proposal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
util/virutil.h bogously included unistd.h. Drop it and replace it by
including it directly where needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virutil.(c|h) is a very gross collection of random code. Remove the enum
handlers from there so we can limit the scope where virtutil.h is used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The unprivileged libvirtd does not have permission to create firewall
rules, or bridge devices, or do anything to the host network in
general. Historically we still activate the network driver though and
let the network start API call fail.
The startup code path which reloads firewall rules on active networks
would thus effectively be a no-op when unprivileged as it is impossible
for there to be any active networks
With the change to use a global set of firewall chains, however, we now
have code that is run unconditionally.
Ideally we would not register the network driver at all when
unprivileged, but the entanglement with the virt drivers currently makes
that impractical. As a temporary hack, we just make the firewall reload
into a no-op.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
During startup libvirtd creates top level chains for both ipv4
and ipv6 protocols. If this fails for any reason then startup
of virtual networks is blocked.
The default virtual network, however, only requires use of ipv4
and some servers have ipv6 disabled so it is expected that ipv6
chain creation will fail. There could equally be servers with
no ipv4, only ipv6.
This patch thus makes error reporting a little more fine grained
so that it works more sensibly when either ipv4 or ipv6 is
disabled on the server. Only the protocols that are actually
used by the virtual network have errors reported.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
During startup we create some top level chains in which all
virtual network firewall rules will be placed. The upfront
creation is done to avoid slowing down creation of individual
virtual networks by checking for chain existance every time.
There are some factors which can cause this upfront creation
to fail and while a message will get into the libvirtd log
this won't be seen by users who later try to start a virtual
network. Instead they'll just get a message saying that the
libvirt top level chain does not exist. This message is
accurate, but unhelpful for solving the root cause.
This patch thus saves any error during daemon startup and
reports it when trying to create a virtual network later.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
According to the official documentation for autoconf[1], the
correct names for these variables are abs_top_{src,build}dir
rather than abs_top{src,build}dir; in fact, we're already
using the correct names in various places, so let's just make
everything nice and consistent.
[1] https://www.gnu.org/software/autoconf/manual/autoconf-2.69/html_node/Preset-Output-Variables.html
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1685151
This reverts commit cefb97fb81.
The stateAutoStart callback will be removed in the next commit.
Therefore move autostarting of domains, networks and storage
pools back into stateInitialize callbacks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
dnsmasq documentation says that the *IPv4* prefix/network
address/broadcast address sent to dhcp clients will be automatically
determined by dnsmasq by looking at the interface it's listening on,
so the original libvirt code did not add a netmask to the dnsmasq
commandline (or later, the dnsmasq conf file).
For *IPv6* however, dnsmasq apparently cannot automatically determine
the prefix (functionally the same as a netmask), and it must be
explicitly provided in the conf file (as a part of the dhcp-range
option). So many years after IPv4 DHCP support had been added, when
IPv6 dhcp support was added the prefix was included at the end of the
dhcp-range setting, but only for IPv6.
A user had reported a bug on a host where one of the interfaces was a
superset of the libvirt network where dhcp is needed (e.g., the host's
ethernet is 10.0.0.20/8, and the libvirt network is 10.10.0.1/24). For
some reason dnsmasq was supplying the netmask for the /8 network to
clients requesting an address on the /24 interface.
This seems like a bug in dnsmasq, but even if/when it gets fixed
there, it looks like there is no harm in just always adding the
netmask to all IPv4 dhcp-range options similar to how prefix is added
to all IPv6 dhcp-range options.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The libvirt zonefile for firewalld (added in commit 3b71f2e4) does the
following:
1) lists specific services it wants to allow, then
2) uses a lower priority <reject/> rule to block all other services to
the host, and then finally,
3) relies on the zone's default "accept" policy to, accept all
forwarded traffic (since forwarded traffic is ignored by the
slightly higher priority <reject/> rule in (2)).
I had assumed that icmp traffic was either being allowed at the top of
the rules, or that it would be ignored by the <reject/> rule and
passed by the default accept policy (similar to forwarded traffic),
but this assumption was incorrect; the <reject/> rule does block icmp
traffic. This became apparent when DHCPv6 which requires ICMPv6 in
addition to udp/dhcpv6) failed to work.
This all means that in order to achieve our original goal of "similar
behavior to a default reject policy, but also allowing forwarded
traffic", we need to add rules to allow all icmp and icmpv6 traffic to
the libvirt zone, and that's what this patch does.
This is a further refinement of the resolution to
https://bugzilla.redhat.com/1650320
Signed-off-by: Laine Stump <laine@laine.org>
Acked-by: Eric Garver <eric@garver.life>
