Since we'd disallow migration of a guest that would have possibly
invalid config but still be able to work, relax the WWN check to be
performed only on new starts of the VM.
If a system has a large number of active or active interfaces, it can
be a big waste of time to retrieve and qualify all interfaces if the
caller only wanted one subset. Since netcf has a simple flag for this,
translate the libvirt flag into a netcf flag and let netcf pre-filter.
Getting the MAC address of an interface is actually fairly expensive,
and we've already gotten it and stored it into def, so just keep def
around a bit longer and retrieve it from there.
This reduces the time for "virsh iface-list --all" from 28 to 23
seconds when there are 400 interfaces.
The spec for virConnectListAllInterfaces says that if the pointer that
is supposed to hold the list of interfaces is NULL, the function
should just return the count of interfaces that matched the filter,
but the code never increments the count if the list pointer is NULL.
We are using memory-backing-file even when it's not needed, for example
if user requests hugepages for memory backing, but does not specify any
pagesize or memory node pinning. This causes migrations to fail when
migrating from older libvirt that did not do this. So similarly to
commit 7832fac847 which does it for
memory-backend-ram, this commit makes is more generic and
backend-agnostic, so the backend is not used if there is no specific
pagesize of hugepages requested, no nodeset the memory node should be
bound to, no memory access change required, and so on.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1266856
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
So since the introduction of the memory-backend-file object until now we
only added '-mem-path' for non-NUMA guests and we used the parameters of
the memory-backend-file object to specify the path to the hugetlbfs
mount. But hugepages can be also used without memory-backend-file
object, as it used to be before its introduction. Let's just get this
part of the code back and properly append the '-mem-path' for NUMA
guests as well, but only when the memory backend is not needed.
This parameter is already being applied when no numa is requested and
because we still use memory-object-file unconditionally for
hugepage-backed NUMA guests, this should not fire until later.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
That function is called qemuBuildMemPathStr() and will be used in
other places in the future. The change in the test suite is proper due
to the fact that -mem-prealloc makes only sense with -mem-path (from
qemu documentation -- html/qemu-doc.html).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Support for GICv3 has been recently introduced in qemu using gic-version
option for the 'virt' machine. The option can actually take values of
'2', '3' and 'host', however, since in libvirt this is a numeric
parameter, we limit it only to 2 and 3. Value of 2 is not added to the
command line in order to keep backward compatibility with older qemu
versions.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Unfortunately qemu currently doesn't offer introspection for machine types,
so we have to rely on version number, similar to QEMU_CAPS_MACHINE_USB_OPT.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Commit 307fb904 (Sep 10) added a 'privileged' variable when creating
the DAC driver:
@@ -153,6 +157,7 @@ virSecurityManagerNewDAC(const char *virtDriver,
bool defaultConfined,
bool requireConfined,
bool dynamicOwnership,
+ bool privileged,
virSecurityManagerDACChownCallback chownCallback)
But argument order is mixed up at the caller, swapping dynamicOwnership
and privileged values. This corrects the argument order
https://bugzilla.redhat.com/show_bug.cgi?id=1266628
Since commit e0139e3, we update the pool allocation with
the user-provided allocation values.
For qcow2, the allocation is ignored for volume building,
but we still subtracted it from pool's allocation.
This can result in interesting values if the user-provided
allocation is large enough:
Capacity: 104.71 GiB
Allocation: 109.13 GiB
Available: 16.00 EiB
We already do a VolRefresh on volume creation. Also refresh
the volume after creating and use the new value to update the pool.
https://bugzilla.redhat.com/show_bug.cgi?id=1163091
Commit id '7383b8cc' changed virDomainDef 'virtType' to an enum, that
caused a build failure on some archs due to comparing an unsigned value
to < 0. Adjust the fetch of 'type' to be into temporary 'int virtType'
and then assign that virtType to the def->virtType
Introduce VIR_DOMAIN_VIRT_NONE to give domaintype the default value of zero.
This is specially helpful in constructing better error messages
when we don't want to look up the default emulator by virtType.
The test data in vircapstest.c is also modified to reflect this change.
As of commit 6992994, we set graphics/@listen attribute according to the
first listen child element even if that element is of type='network'.
This was done for backward compatibility with applications which only
support the original listen attribute. However, by doing so we broke
migration to older libvirt which tried to check that the listen
attribute matches one of the listen child elements but which did not
take type='network' elements into account.
We are not concerned about compatibility with old applications when
formatting domain XML for migration for two reasons. The XML is consumed
only by libvirtd and the IP address associated with type='network'
listen address on the source host is just useless on the destination
host. Thus, we can safely avoid propagating the type='network' IP
address to graphics/@listen attribute when creating migratable XML.
https://bugzilla.redhat.com/show_bug.cgi?id=1265111
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This seemed to be more of a false positive as for some reason Coverity
was missing the "ret < 0" goto error condition and somehow believing that
event could be overwritten. At first I thought it was just the ret != 0
condition difference, but it wasn't.
In any case, make use of the recent change to qemuDomainEventQueue to
check event == NULL and just pass it as a parameter directly in the
error path. That avoids the error.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Coverity complains that return from virHookCall is not checked in
one place in qemuProcessStop. Since the comment notes that we cannot
stop the operation even it if fails, just added the ignore_value.
So while working on my previous patches, I've noticed that
virDomainRestore implementation in qemu and test drivers has the
same problem as I am fixing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far we have the following pattern occurring over and over
again:
if (!vm->persistent)
qemuDomainRemoveInactive(driver, vm);
It's safe to put the check into the function and save some LoC.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=871452
So, you want to create a domain from XML. The domain already
exists in libvirt's database of domains. It's okay, because name
and UUID matches. However, on domain startup, internal
representation of the domain is overwritten with your XML even
though we claim that the XML you've provided is a transient one.
The bug is to be found across nearly all the drivers.
Le sigh.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=871452
Okay, so we allow users to 'virsh create' an already existing
domain, providing completely different XML than the one stored in
Libvirt. Well, as long as name and UUID matches. However, in some
drivers the code that handles errors unconditionally removes the
domain that failed to start even though the domain might have
been persistent. Fortunately, the domain is removed just from the
internal list of domains and the config file is kept around.
Steps to reproduce:
1) virsh dumpxml $dom > /tmp/dom.xml
2) change XML so that it is still parse-able but won't boot, e.g.
change guest agent path to /foo/bar
3) virsh create /tmp/dom.xml
4) virsh dumpxml $dom
5) Observe "No such domain" error
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I initially added this in order to keep the code more error-prone to
following additions, but it seems it's still frowned upon.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Now that virQEMUDriverCreateXMLConf is never called with NULL
(after 086f37e97a) we can safely drop useless check in
qemuDomainDeviceDefPostParse as we are guaranteed to be always
called with the driver initialized. Therefore checking if driver
is NULL makes no sense. Moreover, if we mix it with direct driver
dereference. And after that, we are sure that nor @cfg will be
NULL, therefore we can drop checks for that too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Qemu unfortunately doesn't update internal state right after migration
and so the actual balloon size as returned by 'query-balloon' are
invalid for a while after the CPUs are started after migration. If we'd
refresh our internal state at this point we would report invalid current
memory size until the next balloon event would arrive.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1242940
My original implementation was based on a qemu version that still did
not have all the checks in place. Using sizes that would align to odd
megabyte increments will produce the following error:
qemu-kvm: -device pc-dimm,node=0,memdev=memdimm0,id=dimm0: backend memory size must be multiple of 0x200000
qemu-kvm: -device pc-dimm,node=0,memdev=memdimm0,id=dimm0: Device 'pc-dimm' could not be initialized
Introduce an alignment retrieval function for memory devices and use it
to align the devices separately and modify a test case to verify it.
Even though we hit an error in client's IO loop, we still want to
process any pending data. So instead of reporting the error right away,
we can finish the current iteration and report the error once we're done
with it. Note that the error is stored in client->error by
virNetClientMarkClose so we don't need to worry about it being reset or
rewritten by any API we call in the meantime.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Whenever a connection was closed due to keepalive timeout, we would log
a warning but the interrupted API would return rather useless generic
error:
internal error: received hangup / error event on socket
Let's report a proper keepalive timeout error and make sure it is
propagated to all pending APIs. The error should be better now:
internal error: connection closed due to keepalive timeout
Based on an old patch from Martin Kletzander.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Build fail and error like this:
CC qemu/libvirt_driver_qemu_impl_la-qemu_command.lo
qemu/qemu_capabilities.c:46:27: fatal error: qemu_capspriv.h: No such file or directory
#include "qemu_capspriv.h"
Add qemu_capspriv.h to source.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
For some machine types ppc64 machines now require that memory sizes are
aligned to 256MiB increments (due to the dynamically reconfigurable
memory). As now we treat existing configs reasonably in regards to
migration, we can round all the sizes unconditionally. The only drawback
will be that the memory size of a VM can potentially increase by
(256MiB - 1byte) * number_of_NUMA_nodes.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1249006
When we are starting a qemu process for an incomming migration or
snapshot reloading we should not modify the memory sizes in the domain
since we could potentially change the guest ABI that was tediously
checked before. Additionally the function now updates the initial memory
size according to the NUMA node size, which should not happen if we are
restoring state.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1252685
When implementing memory hotplug I've opted to recalculate the initial
memory size (contents of the <memory> element) as a sum of the sizes of
NUMA nodes when NUMA was enabled. This was based on an assumption that
qemu did not allow starting when the NUMA node size total didn't equal
to the initial memory size. Unfortunately the check was introduced to
qemu just lately.
This patch uses the new XML parser flag to decide whether it's safe to
update the memory size total from the NUMA cell sizes or not.
As an additional improvement we now report an error in case when the
size of hotplug memory would exceed the total memory size.
The rest of the changes assures that the function is called with correct
flags.
Add 'initial_memory' member to struct virDomainMemtune so that the
memory size can be pre-calculated once instead of inferring it always
again and again.
Separating of the fields will also allow finer granularity of decisions
in later patches where it will allow to keep the old initial memory
value in cases where we are handling incomming migration from older
versions that did not always update the size from NUMA as the code did
previously.
The change also requires modification of the qemu memory alignment
function since at the point where we are modifying the size of NUMA
nodes the total size needs to be recalculated too.
The refactoring done in this patch also fixes a crash in the hyperv
driver that did not properly initialize def->numa and thus
virDomainNumaGetMemorySize(def->numa) crashed.
In summary this patch should have no functional impact at this point.
The post parse func is growing rather large. Since later patches will
introduce more logic in the memory post parse code, split it into a
separate handler.
Add a new parser flag that will mark code paths that parse XML files
wich will not be used with existing VM state so that post parse
callbacks can possibly do ABI incompatible changes if needed.
The flag was used only for formatting the XML and once the parser and
formatter flags were split in 0ecd685109
it doesn't make sense any more to have it.
Extract the size determination into a separate function and reuse it
across the memory device alignment functions. Since later we will need
to decide the alignment size according to architecture let's pass def to
the functions.
Since test suite now correctly creates capabilities cache, the hack is not
needed any more.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The main purpose of this patch is to introduce test mode to
virQEMUCapsCacheLookup(). This is done by adding a global variable, which
effectively overrides binary name. This variable is supposed to be set by
test suite.
The second addition is qemuTestCapsCacheInsert() function which allows the
test suite to actually populate the cache.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Invalid read of size 4
at 0x945CA30: __pthread_mutex_unlock_full (in /lib64/libpthread-2.20.so)
by 0x4F0404B: virMutexUnlock (virthread.c:94)
by 0x4F7161B: virStoragePoolObjUnlock (storage_conf.c:2603)
by 0x4FE0476: testStoragePoolUndefine (test_driver.c:4328)
by 0x4FCF086: virStoragePoolUndefine (libvirt-storage.c:656)
by 0x15A7F5: cmdPoolUndefine (virsh-pool.c:1721)
by 0x12F48D: vshCommandRun (vsh.c:1212)
by 0x132AA7: main (virsh.c:943)
Address 0xfda56a0 is 16 bytes inside a block of size 104 free'd
at 0x4C2BA6C: free (vg_replace_malloc.c:473)
by 0x4EA5C96: virFree (viralloc.c:582)
by 0x4F70B69: virStoragePoolObjFree (storage_conf.c:412)
by 0x4F7167B: virStoragePoolObjRemove (storage_conf.c:437)
by 0x4FE0468: testStoragePoolUndefine (test_driver.c:4323)
by 0x4FCF086: virStoragePoolUndefine (libvirt-storage.c:656)
by 0x15A7F5: cmdPoolUndefine (virsh-pool.c:1721)
by 0x12F48D: vshCommandRun (vsh.c:1212)
by 0x132AA7: main (virsh.c:943)
Similar to commit id '35847860', it's possible to attempt to create
a 'netfs' directory in an NFS root-squash environment which will cause
the 'vol-delete' command to fail. It's also possible error paths from
the 'vol-create' would result in an error to remove a created directory
if the permissions were incorrect (and disallowed root access).
Thus rename the virFileUnlink to be virFileRemove to match the C API
functionality, adjust the code to following using rmdir or unlink
depending on the path type, and then use/call it for the VIR_STORAGE_VOL_DIR
As far as not every call of prlsdkUUIDParse assume correct UUID
supplied, there is no use to complain about wrong format in it.
Otherwise our log is flooded with false error messages.
For instance, calling prlsdkUUIDParse from prlsdkEventsHandler
works as a filter and in case of uuid absence for event issuer,
we simply know that we shouldn't continue further processing.
Instead of error logging for all calls we should explicitly take
into accaunt where it is called from.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far this function was not kept in sync with changing
virDomainDiskDef. Fill in all the missing checks and reorganize
their order so it's easier to track which items are not being
checked for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I always felt like this function is qemu specific rather than
libvirt-wide. Other drivers may act differently on virDomainDef
change and in fact may require talking to underlying hypervisor
even if something else's than disk->src has changed. I know that
the function is still incomplete, but lets break that into two
commits that are easier to review. This one is pure code
movement.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Firstly, our coding guidelines suggest using 'cleanup' label
instead of 'end'. Then, @ret should be set to value representing
success as the last statement before the 'cleanup' label.
And while I am at this function, lets enumerate all the possible
enum items (virDomainDiskDevice) and avoid using 'default' in
switch(). Pooh. Also, nothing bad happens if we look up the disk
to change in the domain upfront. In fact, it's going to be
helpful later when we want to keep some old values for performing
a rollback.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This new private API should return true iff sources of two disks
differs in sense that qemu should be instructed to change the
disk backend. For instance, ejecting a CDROM is such case, or
pointing disk into a different ISO location, and so on.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While we currently only allow changing a media in a disk, this is
going to change in a while, so the function name would be
invalid. Moreover, the old name does not match the pattern laid
out by other update functions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1159219
So, in 11e058ca58 I've tried to make UpdateDevice update
startupPolicy too. And it worked well until somebody came around
and pushed d0dc6c0369 which accidentally removed my
contribution. Redo my commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When persistently migrating a domain to a destination host where the
same domain already exists (i.e., it is persistent and shutdown at the
destination), we would happily throw away the original persistent
definition without properly freeing it. And when updating the definition
fails for some reason we don't properly revert to the original state
leaving the domain broken.
In addition to fixing these issues, the patch also makes sure the domain
definition parsed from a migration cookie is either used or freed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
For quite a long time we don't need to postpone queueing events until
the end of the function since we no longer have the big driver lock.
Let's make the code of qemuMigrationFinish simpler by queuing events at
the time we generate them.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Every single call to qemuDomainEventQueue() uses the following pattern:
if (event)
qemuDomainEventQueue(driver, event);
Let's move the check for valid event to qemuDomainEventQueue and
simplify all callers.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Finish is the final state in v2 of our migration protocol. If something
fails, we have no option to abort the migration and resume the original
domain. Non fatal errors (such as failure to start guest CPUs or make
the domain persistent) has to be treated as success. Keeping the domain
running while reporting the failure was just asking for trouble.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Whenever something fails during incoming migration in Finish phase
before we started guest CPUs, we need to kill the domain in addition to
reporting the failure.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When we save status XML at the point during migration where we have
already started the domain on destination, we can't really go back and
abort migration. Thus the only thing we can do is to log a warning and
report success.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Offline migration is quite special because we don't really need to do
anything but make the domain persistent. Let's do it separately from
normal migration to avoid cluttering the code with
!(flags & VIR_MIGRATE_OFFLINE).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
After attach-device a <hostdev> with --config, new device doesn't
show up in dumpxml and in guest.
To fix that, set dev->data.hostdev = NULL after work so that the
pointer is not freed, since vmdef has the pointer and still need it.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Tool such as libguestfs need the datacenter path to get access to disk
images. The ESX driver knows the correct datacenter path, but this
information cannot be accessed using libvirt API yet. Also, it cannot
be deduced from the connection URI in a robust way.
Expose the datacenter path in the domain XML as <vmware:datacenterpath>
node similar to the way the <qemu:commandline> node works. The new node
is ignored while parsing the domain XML. In contrast to <qemu:commandline>
it is output only.
Commit id 'f1f68ca33' added code to remove the directory paths for
auto-generated sockets, but that code could be called before the
paths were created resulting in generating error messages from
virFileDeleteTree indicating that the file doesn't exist.
Rather than "enforce" all callers to make the non-NULL and existence
checks, modify the virFileDeleteTree API to silently ignore NULL on
input and non-existent directory trees.
When looking for a QEMU binary suitable for running ppc64le guests
we have to take into account the fact that we use the QEMU target
as key for the hash, so direct comparison is not good enough.
Factor out the logic from virQEMUCapsFindBinaryForArch() to a new
virQEMUCapsFindTarget() function and use that both when looking
for QEMU binaries available on the system and when looking up
QEMU capabilities later.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1260753
libxl/libxl_conf.c: In function 'libxlDriverConfigNew':
libxl/libxl_conf.c:1560:30: error: 'log_level' may be used uninitialized
in this function [-Werror=maybe-uninitialized]
Instead of a hardcoded DEBUG log level, use the overall
daemon log level specified in libvirtd.conf when opening
a log stream with libxl. libxl is very verbose when DEBUG
log level is set, resulting in huge log files that can
potentially fill a disk. Control of libxl verbosity should
be placed in the administrator's hands.
Fixes the following error when attempting to add a disk with bus='virtio'
to a machine which actually supports virtio-mmio (caught with ARM virt):
virtio disk cannot have an address of type 'virtio-mmio'
The problem has been likely introduced by
e8d5517254. Before that
qemuAssignDevicePCISlots() was never called for ARM "virt" machine.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1124841
If running in session mode it may happen that we fail to set
correct SELinux label, but the image may still be readable to
the qemu process. Take this into account.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We may want to do some decisions in drivers based on fact if we
are running as privileged user or not. Propagate this info there.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We have plenty of callbacks in the driver. Some of these
callbacks require more than one argument to be passed. For that
we currently have a data type (struct) per each callback. Well,
so far for only one - SELinuxSCSICallbackData. But lets turn it
into more general name so it can be reused in other callbacks too
instead of each one introducing a new, duplicate data type.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit f1f68ca334 tried fixing running multiple domains under various
users, but if the user can't browse the directory, it's hard for the
qemu running under that user to create the monitor socket.
The permissions need to be fixed in two places in the spec file due to
support for both installations with and without driver modules.
Creating a directory with '$(MKDIR_P) -m' shouldn't fail even on systems
where autoconf needs to fallback to 'install-sh -d'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146886
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit 8125113c added code that should remove the disk backend if the
fronted hotplug failed for any reason. The code had a bug though as it
used the disk string for unplug rather than the backend alias. Fix the
code by pre-creating an alias string and using it instead of the disk
string. In cases where qemu does not support QEMU_CAPS_DEVICE, we ignore
the unplug of the backend since we can't really create an alias in that
case.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1262399
There's a couple reports of things failing in this area (bug 1259070),
but it's tough to tell what's going wrong without stderr from
qemu-bridge-helper. So let's report stderr in the error message
Couple new examples:
virbr0 is inactive:
internal error: /usr/libexec/qemu-bridge-helper --use-vnet --br=virbr0 --fd=21: failed to communicate with bridge helper: Transport endpoint is not connected
stderr=failed to get mtu of bridge `virbr0': No such device
bridge isn't on the ACL:
internal error: /usr/libexec/qemu-bridge-helper --use-vnet --br=br0 --fd=21: failed to communicate with bridge helper: Transport endpoint is not connected
stderr=access denied by acl file
The xenXMConfigCacheRefresh method scans /etc/xen and loads
all config files it finds. It then scans its internal hash
table and purges any (previously) loaded config files whose
refresh timestamp does not match the timestamp recorded at
the start of xenXMConfigCacheRefresh(). There is unfortunately
a subtle flaw in this, because if loading the config files
takes longer than 1 second, some of the config files will
have a refresh timestamp that is 1 or more seconds different
(newer) than is checked for. So we immediately purge a bunch
of valid config files we just loaded.
To avoid this flaw, we must pass the timestamp we record at
the start of xenXMConfigCacheRefresh() into the
xenXMConfigCacheAddFile() method, instead of letting the
latter call time(NULL) again.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
commit 4b53d0d4ac "libxl: don't remove persistent domain on start
failure" cleans up the vm object and sets it to NULL if the vm is not
persistent, however at end job vm (now NULL) is dereferenced via the call to
libxlDomainObjEndJob. Avoid this by skipping "endjob" and going
straight to "cleanup" in this case.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Up until now, the default has been rtl8139, but no check was in
place to make sure that device was actually available.
Now we try rtl8139, e1000 and virtio-net in turn, checking for
availability before using any of them: this means we have a much
better chance for the guest to be able to boot.
Commit f1f68ca334 did not report an error if virFileMakePath()
returned -1. Well, who would've guessed function with name starting
with 'vir' sets an errno instead of reporting an error the libvirt way.
Anyway, let's fix it, so the output changes from:
$ virsh start arm
error: Failed to start domain arm
error: An error occurred, but the cause is unknown
to:
$ virsh start arm
error: Failed to start domain arm
error: Cannot create directory '/var/lib/libvirt/qemu/domain-arm': Not
a directory
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146886
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If the current live definition does not have memory hotplug enabled, but
the persistent one does libvirt would reject migration if the
destination does not support memory hotplug even if the user didn't want
to persist the VM at the destination and thus the XML containing the
memory hotplug definition would not be used. To fix this corner case the
code will check for memory hotplug in the newDef only if
VIR_MIGRATE_PERSIST_DEST was used.
Commit 35847860f6 Added the virFileUnlink function, but failed to add
a version for mingw build, causing the following error:
Cannot export virFileUnlink: symbol not defined
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1260846
Introduced by 8fedbbdb, if we parse an unordered NUMA cell, will
get a segfault. This is because of a check for overlapping @cpus
sets we have there. However, since the array to hold guest NUMA
cells is allocated upfront and therefore it contains all zeros,
an out of order cell will break our assumption that cell IDs have
increasing character. At this point we try to access yet NULL
bitmap and therefore segfault.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Running valgrind on a very simplistic program consisting only of
opening and closing admin connection (virAdmConnect{Open,Close}) shows a
leak in remoteAdminPrivNew, because the last reference to privateData is
not decremented, thus the object won't be disposed. This patch unrefs
the privateData object once we closed the active connection to daemon,
making further use of this connection useless.
==24577== at 0x4A089C7: calloc (in /usr/lib64/valgrind/vgpreload_***linux.so)
==24577== by 0x4E8835F: virAllocVar (viralloc.c:560)
==24577== by 0x4EDFA5C: virObjectNew (virobject.c:193)
==24577== by 0x4EDFBD4: virObjectLockableNew (virobject.c:219)
==24577== by 0x4C14DAF: remoteAdminPrivNew (libvirt-admin.c:152)
==24577== by 0x4C1537E: virAdmConnectOpen (libvirt-admin.c:308)
==24577== by 0x400BAD: main (listservers.c:39)
==24577== LEAK SUMMARY:
==24577== definitely lost: 80 bytes in 1 blocks
==24577== indirectly lost: 840 bytes in 6 blocks
==24577== possibly lost: 0 bytes in 0 blocks
==24577== still reachable: 12,179 bytes in 199 blocks
==24577== suppressed: 0 bytes in 0 blocks
