Rewrite the code to improve maintainability and also re-do construction
of error messages which are assembled from non-translatable parts.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/455
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit dbf1f68410 ("security: do not remember/recall labels for VFIO")
rightly changed the DAC and SELinux labeling parameters to fix a problem
with "VFIO hostdevs" but really only addressed the PCI codepaths.
As a result, we can still encounter this with VFIO MDEVs such as
vfio-ccw and vfio-ap, which can fail on a hotplug:
[test@host ~]# mdevctl stop -u 11f2d2bc-4083-431d-a023-eff72715c4f0
[test@host ~]# mdevctl start -u 11f2d2bc-4083-431d-a023-eff72715c4f0
[test@host ~]# cat disk.xml
<hostdev mode='subsystem' type='mdev' model='vfio-ccw'>
<source>
<address uuid='11f2d2bc-4083-431d-a023-eff72715c4f0'/>
</source>
<address type='ccw' cssid='0xfe' ssid='0x0' devno='0x3c51'/>
</hostdev>
[test@host ~]# virsh attach-device guest ~/disk.xml
error: Failed to attach device from /home/test/disk.xml
error: Requested operation is not valid: Setting different SELinux label on /dev/vfio/3 which is already in use
Make the same changes as reported in commit dbf1f68410, for the mdev paths.
Reported-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
igb is a new network device which will be introduced with QEMU 8.0.0.
It is a successor of e1000e so it has PCIe interface and is understands
virtio-net headers as e1000e does.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
During qemu driver shutdown, objects are freed in qemuStateCleanup that
could still be used by active worker threads, resulting in crashes. E.g.
a worker thread could be processing a monitor EOF event after the
security manager is already disposed
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x00007fd9a9a1e1fe in virSecurityManagerMoveImageMetadata (mgr=0x7fd948012160, pid=-1, src=src@entry=0x7fd98c072c90, dst=dst@entry=0x0)
at ../../src/security/security_manager.c:468
#1 0x00007fd9646ff0f0 in qemuSecurityMoveImageMetadata (driver=driver@entry=0x7fd948043830, vm=vm@entry=0x7fd98c066db0, src=src@entry=0x7fd98c072c90,
dst=dst@entry=0x0) at ../../src/qemu/qemu_security.c:182
#2 0x00007fd96462c7b0 in qemuBlockRemoveImageMetadata (driver=driver@entry=0x7fd948043830, vm=vm@entry=0x7fd98c066db0, diskTarget=0x7fd98c072530 "vda",
src=<optimized out>) at ../../src/qemu/qemu_block.c:2628
#3 0x00007fd9646929d6 in qemuProcessStop (driver=driver@entry=0x7fd948043830, vm=vm@entry=0x7fd98c066db0, reason=reason@entry=VIR_DOMAIN_SHUTOFF_SHUTDOWN,
asyncJob=asyncJob@entry=QEMU_ASYNC_JOB_NONE, flags=<optimized out>) at ../../src/qemu/qemu_process.c:7585
#4 0x00007fd9646fc842 in processMonitorEOFEvent (vm=0x7fd98c066db0, driver=0x7fd948043830) at ../../src/qemu/qemu_driver.c:4794
#5 qemuProcessEventHandler (data=0x561a93febb60, opaque=0x7fd948043830) at ../../src/qemu/qemu_driver.c:4900
#6 0x00007fd9a9971a31 in virThreadPoolWorker (opaque=opaque@entry=0x561a93fb58e0) at ../../src/util/virthreadpool.c:163
(gdb) p mgr->drv
$2 = (virSecurityDriverPtr) 0x0
Prior to commit 7cf76d4e3a, the worker thread pool was freed before
disposing any driver objects. Let's return to that pattern, but leave
the other changes made by 7cf76d4e3a.
Signed-off-by: Tamara Schmitz <tamara.schmitz@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Introduce a small kludge in the parser to avoid unnecessarily
blocking incoming migration from a range of recent libvirt
releases.
https://bugzilla.redhat.com/show_bug.cgi?id=2184966
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The canonical order for <os> child elements is <firmware>
then <loader>.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In an effort to separate the validation steps from the Parse stage,
a few validation checks of virDomainGraphicsListenDef have been moved from
virDomainGraphicsListenDefParseXML() in domain_conf.c to
virDomainGraphicsDefListensValidate() in domain_validate.c
Signed-off-by: K Shiva <shiva_kr@riseup.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently translated at 86.1% (8958 of 10400 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/cs/
Co-authored-by: Pavel Borecki <pavel.borecki@gmail.com>
Signed-off-by: Pavel Borecki <pavel.borecki@gmail.com>
Historically the snapshot code attempted to forbid internal snapshots
with UEFI both in active and inactive case. Unfortunately due to the
intricacies of UEFI probing this didn't really work for inactive VMs
which made users rely on the feature.
Now with the changes to store detected UEFI environment also in the
inactive definition this broke the feature for those users.
Since the varstore doesn't really change that much in the lifecycle of a
VM it usually is okay to simply leave it as is.
Restore the functionality for inactive snapshots by disabling the check.
In the future when uefi snapshotting will be added the rest of the
condition will also be removed.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/460
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that all tests were converted to use real capabilities we don't need
it any more. Remove it so that no new tests are added with it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace them with full files so that potential fallout from conversion
to real capabilities is more obvious and the test is simpler to add.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patch will be modifying all of them to use real capabilities.
This way it will be more obvious what will change.
Keeping the symlinks around is tedious for humans to do. Waste some
storage instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported qemu versions at this point support both 'qemu-xhci' and
'nec-xhci' controllers. To allow using real capabilities restructure the
tests so that we test both controllers explicitly as well as the
selection of the default model.
Also add a xml2xml test invocation of the unified test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The fake-caps version was kept as an example that the code behaves the
same with real capabilities. Now it's not needed any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With all supported qemu versions we'll pick PCIe to use for the implicit
address busses (those lacking an explicit controller) and thus the
addresses must reflect that.
Update the test to add the new flags, and fix the addresses.
Additionally add a real-caps version of the test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make the output changes of upcoming modernization more visible.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use real caps and clear out flags for PCIe so that we have a real-ish
example of an aarch64 machine using mmio.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test data is effectively identical to the
'aarch64-virtio-pci-default' case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a version for 'latest' caps as well as '4.2.0'. The test
demonstrates that with a real qemu PCIe will be used instead of MMIO.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the two negative cases to use real capapbilities as well as the
positive case for situations when KVM is not used by stripping the
QEMU_CAPS_KVM flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert 'aarch64-gic-default' and 'aarch64-gic-none' cases to use real
capabilities both latest and locked to 4.2.0 to show what would happen
with a real qemu.
Note that the qemuTestSetHostArch() calls are needed as real caps
override the setting once used. Once we convert all tests to real data
this can be dropped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will be modifying the tests for selecting the GIC
version to use real capabilities. This in certain cases will show that a
different version is picked.
Using symlinks makes it inconvenient to do the modifications and
unobvious what changed.
Remove the symlinks and replace them by real output files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function always returns 0. Remove the return value and refactor
caller.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Inside of virAcpiParseIORTNodeHeader() there's an
virReportError() which reports size of a structure using sizeof()
operator. Well, it's not well documented but the returned type of
sizeof() is apparently size_t but the format string uses %lu.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In my previous commit v9.2.0-rc1~3 I've made virt-host-validate
to report host IOMMU check pass if IORT table is present. This is
not sufficient though, because IORT describes much more than just
IOMMU (well, it's called SMMU in ARM world). In fact, this can be
seen in previous commit which adds test cases: there are tables
(IORT_virt_aarch64) which does not contain any SMMU records.
But after previous commits, we can parse the table so switch to
that.
Fixes: 2c13a2a7c9
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2178885
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduce a test that checks newly introduced virAcpi module.
There are three IORT tables from a real HW (IORT_ampere,
IORT_gigabyte and IORT_qualcomm), then there's one from a VM
(IORT_virt_aarch64) and one that I handcrafted to be empty
(IORT_empty).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The aim of this new module is to contain code that's parsing ACPI
tables. For now, only parsing of IORT table is implemented (it's
ARM specific table). And since we only need to check whether the
table contains SMMU record, the code is very simplified.
I've followed the specification published here:
https://developer.arm.com/documentation/den0049/latest/
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Currently translated at 84.9% (8830 of 10400 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/cs/
Co-authored-by: Pavel Borecki <pavel.borecki@gmail.com>
Signed-off-by: Pavel Borecki <pavel.borecki@gmail.com>
In our coding style document we have examples of good and bad
code, which we mark as:
// Good
// Bad
respectively. But in the very same document we advocate for using
C style of comments over C++. Follow our own advice and switch
annotation to:
/* Good */
/* Bad */
And while at it, align these annotations within their blocks for
better readability.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This flag is intended to be used exclusively in the context of
building GLib itself and should not be passed to the compiler
by a third-party project such as libvirt.
Reverts: 77d1fa5 ("tests: Compile virgdbusmock.c with GIO_COMPILATION enabled")
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All of the tests that use this mock (networkxml2firewalltest,
virsystemdtest, virpolkittest) are either no-ops on Windows, or
are not compiled at all on the target.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Left behind by commit 35eb484 ("tests: remove firewalld
backend tests from virfirewalltest.c").
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This unbreaks the various $CROSS-$NAME-local-env jobs.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Attaching disk into running VM the offline definition may not be
updated and we will end up with that disk existing only in live
definition. Creating snapshot with this state saves both live and
offline definition into snapshot metadata.
When we are deleting an external snapshot we are updating these
definitions in the snapshot metadata so we should just skip over
non-existing disks instead of reporting error.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2174700
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
