Clean up all _virDomainMemoryStat.
Signed-off-by: James <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Clean up all _virDomainBlockStats.
Signed-off-by: James <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Clean up all _virDomainInterfaceStats.
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Add an iothread parameter to allow attaching to an IOThread, such as:
virsh attach-disk $dom $source $target --live --config --iothread 2 \
--targetbus virtio --driver qemu --subdriver raw --type disk
Coverity complained that checking the return of virDomainCreate()
was not consistent amongst the callers - so added the return check
to the objecteventtest.c and adjust the virt-login-shell to compare
< 0 rather than just non zero for the failure condition.
Coverity complains that on the first pass through the for loop that
'params' cannot be true, thus the ternary setting to "&" cannot be
done. Since we can only ever get to this point once, drop the ternary
When a domain is undefined, there are options to remove it's
managed save state or snapshots. However, there's another file
that libvirt creates per domain: the NVRAM variable store file.
Make sure that the file is not left behind if the domain is
undefined.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Coverity notes that after we VIR_ALLOC_N(params, nparams) a failed call to
virDomainGetCPUStats could result in nparams being set to -1. In that case,
the subsequent virTypedParamsFree in cleanup will pass -1 which isn't good.
Use the returned value as the number of stats to display in the loop as
it will be the value reported from the hypervisor and may be less than
nparams which is OK
Signed-off-by: John Ferlan <jferlan@redhat.com>
Coverity points out that if 'dom' isn't returned from virDomainQemuAttach,
then the code already jumps to cleanup, so there was no need for the
subsequent if (dom != NULL) check.
I moved the error message about failure into the goto cleanup on failure
and then removed the if (dom != NULL)
Signed-off-by: John Ferlan <jferlan@redhat.com>
Coverity points out that by using EMPTYSTR(type) we are guarding against
the possibility that it could be NULL; however, based on how 'type' was
initialized to NULL, then using nested ternary if-then-else's (?:?:)
setting either "ipv4", "ipv6", or "" - there is no way it could be NULL.
Since "-" is supposed to mean something empty in a field - modify the
nested ternary to an easier to read/process if-then-else leaving the
initialization to NULL to mean "-" in the formatted output.
Also changed the name from 'type' to 'typestr'.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since 0766783abb
Coverity complains that the EDIT_FREE definition results in DEADCODE.
As it turns out with the change to use the EDIT_FREE macro the call to
vir*Free() wouldn't be necessary nor would it happen...
Prior code to above commitid would :
vir*Ptr foo = NULL;
...
foo = vir*GetXMLDesc()
...
vir*Free(foo);
foo = vir*DefineXML()
...
And thus the free was needed. With the change to use EDIT_FREE the
same code changed to:
vir*Ptr foo = NULL;
vir*Ptr foo_edited = NULL;
...
foo = vir*GetXMLDesc()
...
if (foo_edited)
vir*Free(foo_edited);
foo_edited = vir*DefineXML()
...
However, foo_edited could never be set in the code path - even with
all the goto's since the only way for it to be set is if vir*DefineXML()
succeeds in which case the code to allow a retry (and thus all the goto's)
never leaves foo_edited set
All error paths lead to "cleanup:" which causes both foo and foo_edited
to call the respective vir*Free() routines if set.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Tweak the messages so that they mention "title" rather than
"description" when operating in title mode. Also fixes one missing "%s"
before non-formatted gettext message.
Before:
$ virsh desc --title dom
No description for domain: dom
After:
$ virsh desc --title dom
No title for domain: dom
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140034
Total time of a migration and total downtime transfered from a source to
a destination host do not count with the transfer time to the
destination host and with the time elapsed before guest CPUs are
resumed. Thus, source libvirtd remembers when migration started and when
guest CPUs were paused. Both timestamps are transferred to destination
libvirtd which uses them to compute total migration time and total
downtime. Obviously, this requires the time to be synchronized between
the two hosts. The reported times are useless otherwise but they would
be equally useless if we didn't do this recomputation so don't lose
anything by doing it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The parser accepts P and E, so the formatter should too.
* tools/virsh.c (vshPrettyCapacity): Handle larger units.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit c1d75de caused this warning on 32-bit platforms (fatal when
-Werror is enabled):
virsh-domain.c: In function 'cmdBlockCopy':
virsh-domain.c:2003:17: error: comparison is always false due to limited range of data type [-Werror=type-limits]
Forcing the left side of the < to be ull instead of ul shuts up
the 32-bit compiler while still protecting 64-bit code from overflow.
* tools/virsh-domain.c (cmdBlockCopy): Add type coercion.
Signed-off-by: Eric Blake <eblake@redhat.com>
Expose the new power of virDomainBlockCopy through virsh (well,
all but the finer-grained bandwidth, as that is its own can of
worms for a later patch). Continue to use the older API where
possible, for maximum compatibility.
The command now requires either --dest (with optional --format
and --blockdev), to directly describe the file destination, or
--xml, to name a file that contains an XML description such as:
<disk type='network'>
<driver type='raw'/>
<source protocol='gluster' name='vol1/img'>
<host name='red'/>
</source>
</disk>
[well, it may be a while before the qemu driver is actually patched
to act on that particular xml beyond just parsing it, but the virsh
interface won't need changing at that time]
Non-zero option parameters are converted into virTypedParameters,
and if anything requires the new API, the command can synthesize
appropriate XML even if the --dest option was used instead of --xml.
The existing --raw flag remains for back-compat, but the preferred
spelling is now --format=raw, since the new API now allows us
to specify all formats rather than just a boolean raw to suppress
probing.
I hope I did justice in describing the effects of granularity and
buf-size on how they get passed through to qemu.
* tools/virsh-domain.c (cmdBlockCopy): Add new options --xml,
--granularity, --buf-size, --format. Make --raw an alias for
--format=raw. Call new API if new parameters are in use.
* tools/virsh.pod (blockcopy): Document new options.
Signed-off-by: Eric Blake <eblake@redhat.com>
I'm about to extend the capabilities of blockcopy. Hiding a few
common lines of implementation gets in the way of the new required
logic, and putting the new logic in the common implementation won't
benefit any of the other blockjob operations. Therefore, it is
simpler to just do the work inline. There should be no semantic
change in this patch.
* tools/virsh-domain.c (blockJobImpl): Move block copy guts...
(cmdBlockCopy): ...into their lone caller.
Signed-off-by: Eric Blake <eblake@redhat.com>
To date, anyone performing a block copy and pivot ends up with
the destination being treated as <disk type='file'>. While this
works for data access for a block device, it has at least one
noticeable shortcoming: virDomainGetBlockInfo() reports allocation
differently for block devices visited as files (the size of the
device) than for block devices visited as <disk type='block'>
(the maximum sector used, as reported by qemu); and this difference
is significant when trying to manage qcow2 format on block devices
that can be grown as needed.
Of course, the more powerful virDomainBlockCopy() API can already
express the ability to set the <disk> type. But a new API can't
be backported, while a new flag to an existing API can; and it is
also rather inconvenient to have to resort to the full power of
generating XML when just adding a flag to the older call will do
the trick. So this patch enhances blockcopy to let the user flag
when the resulting XML after the copy must list the device as
type='block'.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_REBASE_COPY_DEV):
New flag.
* src/libvirt.c (virDomainBlockRebase): Document it.
* tools/virsh-domain.c (opts_block_copy, blockJobImpl): Add
--blockdev option.
* tools/virsh.pod (blockcopy): Document it.
* src/qemu/qemu_driver.c (qemuDomainBlockRebase): Allow new flag.
(qemuDomainBlockCopy): Remember the flag, and make sure it is only
used on actual block devices.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Expose the new flag just added to virDomainGetBlockJobInfo.
With --raw, the presence or absence of --bytes determines which
flag to use in the single API call. Without --raw, the use of
--bytes forces an error if the server doesn't support it,
otherwise, the code tries to silently fall back to scaling the
MiB/s value.
My goal is to eventually also support --bytes in bandwidth mode;
but that's a bit further down the road (and needs a new API flag
added in libvirt.h first).
This changes the human output, but the previous patch added
raw output precisely so that we can have flexibility with the
human output. For this commit, I used qemu-monitor-command to
force an unusual bandwidth, but the same will be possible once
qemu implements virDomainBlockCopy:
Before:
Block Copy: [100 %] Bandwidth limit: 2 MiB/s
After:
Block Copy: [100 %] Bandwidth limit: 1048577 bytes/s (1.000 MiB/s)
The cache avoids having to repeatedly checking whether the flag
works when talking to an older server, when multiple blockjob
commands are issued during a batch session and the user is
manually polling for job completion.
* tools/virsh.h (_vshControl): Add a cache.
* tools/virsh.c (cmdConnect, vshReconnect): Initialize the cache.
* tools/virsh-domain.c (opts_block_job): Add --bytes.
* tools/virsh.pod (blockjob): Document this.
Signed-off-by: Eric Blake <eblake@redhat.com>
The current output of 'blockjob [--info]' is a single line
designed for human consumption; it's not very nice for machine
parsing. Furthermore, I have plans to modify the line in
response to the new flag for controlling bandwidth units.
Solve that by adding a --raw parameter, which outputs
information closer to the C struct.
$ virsh blockjob testvm1 vda --raw
type=Block Copy
bandwidth=1
cur=197120
end=197120
The information is indented, because I'd like for a later patch
to add a mode that iterates over all the vm's disks with status
for each; in that mode, each block name would be listed unindented
before information (if any) about that block.
Now that we have a raw mode, we can guarantee that it won't change
format over time. Any app that cares about parsing the output can
try --raw, and if it fails, know that it was talking to an older
virsh and fall back to parsing the human-readable format which had
not changed until now; meanwhile, when not using --raw, we have
freed future virsh to change the output to whatever makes sense.
My first change to human mode: this command now guarantees a line
is printed on successful use of the API, even when the API did
not find a current block job (consistent with the rest of virsh).
Bonus: https://bugzilla.redhat.com/show_bug.cgi?id=1135441
complained that this message was confusing:
$ virsh blockjob test1 hda --async --bandwidth 10
error: conflict between --abort, --info, and --bandwidth modes
even though the man page already documents that --async implies
abort mode, all because '--abort' wasn't present in the command
line. Since I'm adding another case where options are tied
to or imply a mode, I changed that error to:
error: conflict between abort, info, and bandwidth modes
* tools/virsh-domain.c (cmdBlockJob): Add --raw parameter; tweak
error wording.
* tools/virsh.pod (blockjob): Document it.
Signed-off-by: Eric Blake <eblake@redhat.com>
I have plans to make future enhancements to the job list mode,
which will be easier to do if the common blockJobImpl function
is not mixing a query command with multiple modify commands.
Besides, it just feels weird that all callers to blockJobImpl
had to supply both a bandwidth input argument (unused for info
mode) and an info output argument (unused for all other modes);
not to mention I just made similar cleanups on the libvirtd
side.
The only reason blockJobImpl returned int was because of info
mode returning -1/0/1 (all other job API are -1/0), so that
can also be cleaned up. No user-visible changes in this commit.
* tools/virsh-domain.c (blockJobImpl): Change signature and return
value. Drop info handling.
(cmdBlockJob): Handle info here.
(cmdBlockCommit, cmdBlockCopy, cmdBlockPull): Adjust callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add "domstats" command that excercises both of the new APIs depending if
you specify a domain list or not. The output is printed as a key=value
list of the returned parameters.
resolves https://bugzilla.redhat.com/show_bug.cgi?id=1132305:
The error message for an out-of-range argument was confusing:
virsh -k 9999999999
error: option --k requires a positive numeric argument
After this patch, it is:
error: Invalid value for option -k
Signed-off-by: Eric Blake <eblake@redhat.com>
While prepping for virDomainBlockJob patches, I found some dead code.
* tools/virsh-domain.c (blockJobImpl): Kill unused 'name'.
Signed-off-by: Eric Blake <eblake@redhat.com>
net-undefine doesn't only undefine an inactive network,
but also an active network(persistent), it just cannot
undefine a transient network.
Signed-off-by: Li Yang <liyang.fnst@cn.fujitsu.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
* tools/virsh.pod (migrate): Add --auto-converge flag
Signed-off-by: Pradipta Kr. Banerjee <bpradip@in.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
A possible fix to issue:
http://www.redhat.com/archives/libvir-list/2014-August/thread.html#00227
While doing migration on KVM host, found problem sometimes:
VM is already running on the target host and disappears from source
host, but 'virsh migrate' command line hangs, cannot exit normally.
If pressing "ENTER" key, it will exit.
The code hangs at tools/virsh-domain.c: cmdMigrate
->vshWatchJob->poll():
poll() is trying to select pipe_fd, which is used to receive message
from doMigrate thread. In debugging, found that doMigrate finishes
and at the end it does call safewrite() to write the retval ('0' or
'1') to pipe_fd, and the write is completed. But cmdMigrate poll()
cannot get the event. If pressing "ENTER" key, poll() can get the
event and select pipe_fd, then command line can exit.
In current code, authentication thread which is called by vshConnect
will use stdin, and at the same time, in cmdMigrate main process,
poll() is listening to stdin, that probably affect poll() to get
pipe_fd event. Better to move authentication before vshWatchJob. With
this change, above problem does not exist.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Implement ZFS storage backend driver. Currently supported
only on FreeBSD because of ZFS limitations on Linux.
Features supported:
- pool-start, pool-stop
- pool-info
- vol-list
- vol-create / vol-delete
Pool definition looks like that:
<pool type='zfs'>
<name>myzfspool</name>
<source>
<name>actualpoolname</name>
</source>
</pool>
The 'actualpoolname' value is a name of the pool on the system,
such as shown by 'zpool list' command. Target makes no sense
here because volumes path is always /dev/zvol/$poolname/$volname.
User has to create a pool on his own, this driver doesn't
support pool creation currently.
A volume could be used with Qemu by adding an entry like this:
<disk type='volume' device='disk'>
<driver name='qemu' type='raw'/>
<source pool='myzfspool' volume='vol5'/>
<target dev='hdc' bus='ide'/>
</disk>
This makes the paragaph about attach-interface more descriptive and
correct, adding in a few bits of information that were previously
missing, e.g. --script is only allowed for bridge interfaces of Xen
domains, target name is regenerated if it starts with vnet, mac
address will be autogenerated if not specified.
(I did this in response to an email asking why a script couldn't be
specified for a bridge interface of a qemu domain, and why an
interface of type='ethernet' couldn't be created with
attach-interface)
We parse the bandwidth rates as unsinged long long,
then try to fit them in VIR_TYPED_PARAM_UINT.
Report an error if they exceed UINT_MAX instead of
quietly using wrong values.
https://bugzilla.redhat.com/show_bug.cgi?id=1043735
https://bugzilla.redhat.com/show_bug.cgi?id=1072653
Upon successful upload of a volume, the target volume and storage pool
were not updated to reflect any changes as a result of the upload. Make
use of the existing stream close callback mechanism to force a backend
pool refresh to occur in a separate thread once the stream closes. The
separate thread should avoid potential deadlocks if the refresh needed
to wait on some event from the event loop which is used to perform
the stream callback.
