Simplify construction of a single provider by using
virJSONValueObjectAdd and restructuring the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If a domain is configured to create a macvtap/macvlan but the
target link already exists, startup fails (as expected) with:
error: error creating macvtap interface test@eth0 (52:54:00:d9:0b:db): File exists
Okay, we could make that error message better, but that's not the
point. Since this error originated while generating cmd line
(the caller is qemuProcessStart(), transitively), the cleanup
after failed start is performed (qemuProcessStop()). Here,
virNetDevMacVLanDeleteWithVPortProfile() is called which removes
the macvtap interface we did not create (as it made us fail in
the first place).
Therefore, we need to track which macvtap/macvlan interface was
created successfully and remove only those.
You'll notice that only qemuProcessStop() has the new check. For
the (failed) hotplug case (qemuDomainAttachNetDevice()) this
function is already in place (the @iface_connected variable), or
not needed (qemuDomainRemoveNetDevice() - we're removing an
interface that was already attached to QEMU).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2166235
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Every single caller of the
virNetDevMacVLanDeleteWithVPortProfile() function is calling it
wrapped inside of ignore_value() macro. This is because the
function is annotated as G_GNUC_WARN_UNUSED_RESULT. This makes no
sense. Drop the annotation and the macro envelope.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The hotplug code paths need to be able to pass the FDs to the monitor to
ensure that hotplug works.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
To ensure that we can hot-unplug the disk including the associated fdset
we need to store the fdset ID in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Rollback of FD sets passed to qemu is also needed after possible restart
of libvirtd when we need to serialize the data into status XML. For this
purpose we need to access the fdset ID once it was passed to qemu and
potentially re-create a 'qemuFDPass' struct in passed state.
Introduce 'qemuFDPassNewPassed' and 'qemuFDPassIsPassed'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Until now the code didn't expect that we'd want to rollback/detach a FD
passed on the commandline, but whith disk backend FD passing this can
happen.
Properly mark the 'qemuFDPass' object as passed to qemu even when it was
done on the commandline.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Copy the pointer to qemuFDPass into struct qemuBlockStorageSourceAttachData
so that it can be used from qemuBuildBlockStorageSourceAttachDataCommandline
rather than looping again in qemuBuildDiskSourceCommandLineFDs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Be consistent with other children buffer variable naming scheme.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The iTCO watchdog is part of the q35 machine type since its inception,
we just did not add it implicitly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2137346
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In order for the iTCO watchdog to be operational we must disable the
noreboot pin strap in qemu. This is the default starting from 8.0
machine types, but desirable for older ones as well. And we can safely
do that since that is not guest-visible.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is already possible with qemu, and actually already happening with
q35 machines and a specified watchdog since q35 already includes a
watchdog we do not include in the XML. In order to express such
posibility multiple watchdogs need to be supported.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The g_hash_table_unref() function does not accept NULL. Passing
NULL results in a glib warning being triggered. Check whether the
hash table is not NULL and unref it only then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Support virtio-crypto device, also support cryptodev types:
- builtin
- lkcf
Finally, we can launch a VM(QEMU) with one or more crypto devices by
libvirt.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Changes in this commit:
- docs: formatdomaincaps.rst
- conf: crypto related domain caps
- qemu: crypto related
- tests: crypto related test
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce crypto device like:
<crypto model='virtio' type='qemu'>
<backend model='builtin' queues='1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
</crypto>
<crypto model='virtio' type='qemu'>
<backend model='lkcf'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>
</crypto>
Currently, crypto model supports virtio only, type supports qemu only
(vhost-user in the plan). For the qemu type, backend supports modle
builtin/lkcf, and the queues is optional.
Changes in this commit:
- docs: formatdomain.rst
- schemas: domaincommon.rng
- conf: crypto related domain conf
- qemu: crypto related
- tests: crypto related test
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The field is no longer used so we can remove it and the code filling it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
All callers pass 'false' so we no longer need it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Commit b7798a07f9 (in fall of 2016) changed the way we generate aliases
for 'dimm' memory devices as the alias itself is part of the migration
stream section naming and thus must be treated as ABI.
The code added compatibility layer for VMs with memory hotplug started
with the old scheme to prevent from generating wrong aliases. The
compatibility layer broke though later when 'nvdimm' and 'pmem' devices
were introduced as it wrongly detected them as old configuration.
Now rather than attempting to fix the legacy compat layer to treat other
devices properly we'll be better off simply removing it as it's
extremely unlikely that somebody has a VM started in 2016 running with
today's libvirt and attempts to hotplug more memory.
This fixes a corner case when a user hot-adds a 'dimm' into a VM with a
'dimm' and a 'nvdimm' after restart of libvirtd and then attempts to
migrate the VM.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2158701
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In error case, unref event->vm instead of vm. This makes it
easier for the reader to understand as it is the event struct
that's holding the reference.
Signed-off-by: Shaleen Bathla <shaleen.bathla@oracle.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have virDomainGetCPUStats() API which offers querying
statistics on host CPU usage by given guest. And it works in two
modes: getting overall stats (@start_cpu == -1, @ncpus == 1) or
getting per host CPU usage.
For the QEMU driver it is implemented by looking into values
stored in corresponding cpuacct CGroup controller. Well, this
works for system instances, where libvirt has permissions to
create CGroups and place QEMU process into them. But it does not
fly for session connection, where no CGroups are set up.
Fortunately, we can do something similar to v8.8.0-rc1~95 and use
virProcessGetStatInfo() to fill the overall stats. Unfortunately,
I haven't found any source of per host CPU usage, so we just
continue throwing an error in that case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Firstly, the virProcessGetStatInfo() does not fail really. But
even if it did, it sets correct errno only sometimes (and even
that is done in a helper it's calling - virProcessGetStat() and
even there it's the case only in very few error paths).
Therefore, using virReportSystemError() to report errors is very
misleading. Use plain virReportError() instead. Luckily, there
are only two places where the former was used:
chDomainHelperGetVcpus() and qemuDomainHelperGetVcpus() (not a
big surprise since CH driver is heavily inspired by QEMU driver).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In a recent commit of v9.0.0-rc1~192 I've tried to forbid case
where a TAP device already exists, but at the same time it's
managed by Libvirt (<interface type='ethernet'> <target
dev='tap0' managed='yes'/> </interface>). NB, if @managed
attribute is missing then it's assumed to be managed by Libvirt.
Anyway, I've mistakenly put setting of
VIR_NETDEV_TAP_CREATE_ALLOW_EXISTING flag into managed='yes'
branch instead of managed='no' branch in
qemuInterfaceEthernetConnect().
Move the setting of the flag into the correct branch.
Fixes: a2ae3d299c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The systemd service files of the qemu and libxl driver currently have a
'Requires' dependency on virtlockd, which is too strong since virtlockd
is not enabled by default in either driver. Change the dependency to a
'Wants' to avoid a package dependency between the driver subpackages and
the new libvirt-daemon-lock subpackage.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This commented-out option was pointed out by jtomko during review, but
I missed taking it out when addressing his comments.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This attribute was added to support setting the --interface option for
passt, but in a post-push/pre-9.0-release review, danpb pointed out
that it would be better to use the existing <source dev='xxx'/>
attribute to set --interface rather than creating a new attribute (in
the wrong place). So we remove backend/upstream, and change the passt
commandline creation to grab the name for --interface from source/dev.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Currently, the ThreadContext object is generated whenever we see
.host-nodes attribute for a memory-backend-* object. The idea was
that when the backend is pinned to a specific set of host NUMA
nodes, then the allocation could be happening on CPUs from those
nodes too. But this may not be always possible.
Users might configure their guests in such way that vCPUs and
corresponding guest NUMA nodes are on different host NUMA nodes
than emulator thread. In this case, ThreadContext won't work,
because ThreadContext objects live in context of the emulator
thread (vCPU threads are moved around by us later, when emulator
thread finished its setup and spawned vCPU threads - see
qemuProcessSetupVcpus()). Therefore, memory allocation is done by
emulator thread which is pinned to a subset of host NUMA nodes,
but tries to create a ThreadContext object with a disjoint subset
of host NUMA nodes, which fails.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2154750
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Jumping to the error label and reading the pidfile does not make sense
until we reached qemuSecurityCommandRun which creates the pidfile.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The pidfile is guaranteed to be non-NULL (thanks to glib allocation
functions) and it's dereferenced two lines above anyway.
Reported by coverity:
/src/qemu/qemu_passt.c: 278 in qemuPasstStart()
272 return 0;
273
274 error:
275 ignore_value(virPidFileReadPathIfLocked(pidfile, &pid));
276 if (pid != -1)
277 virProcessKillPainfully(pid, true);
>>> CID 404360: Null pointer dereferences (REVERSE_INULL)
>>> Null-checking "pidfile" suggests that it may be null, but it
>>> has already been dereferenced on all paths leading to the check.
278 if (pidfile)
279 unlink(pidfile);
280
281 return -1;
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
To ensure same behaviour when remote driver is or is not used we must
not steal the FDs and array holding them passed to qemuDomainFDAssociate
but rather duplicate them. At the same time the remote driver must close
and free them to prevent leak.
Pointed out by Coverity as FD leak on error path:
*** CID 404348: Resource leaks (RESOURCE_LEAK)
/src/remote/remote_daemon_dispatch.c: 7484 in remoteDispatchDomainFdAssociate()
7478 rv = 0;
7479
7480 cleanup:
7481 if (rv < 0)
7482 virNetMessageSaveError(rerr);
7483 virObjectUnref(dom);
>>> CID 404348: Resource leaks (RESOURCE_LEAK)
>>> Variable "fds" going out of scope leaks the storage it points to.
7484 return rv;
Fixes: abd9025c2f
Fixes: f762f87534
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This consists of (1) adding the necessary args to the qemu commandline
netdev option, and (2) starting a passt process prior to starting
qemu, and making sure that it is terminated when it's no longer
needed. Under normal circumstances, passt will terminate itself as
soon as qemu closes its socket, but in case of some error where qemu
is never started, or fails to startup completely, we need to terminate
passt manually.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
passt support requires "-netdev stream", which was added to QEMU in
qemu-7.2.0.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This fits better with the element containing the value (<driver>), and
allows us to use virDomainNetBackend* for things in the <backend>
element.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Assert support for VIR_DOMAIN_DEF_FEATURE_DISK_FD in the qemu driver
now that all code paths are adapted.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Probing stats and block copy to a FD passed image is not yet supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We assume that FD passed images already exist so all existance checks
are skipped.
For the case that a FD-passed image is passed without a terminated
backing chain (thus forcing us to detect) we attempt to read the header
from the FD.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Prepare the internal data for passing FDs instead of having qemu open
the file internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When starting up a VM with FD-passed images we need to look up the
corresponding named FD set and associate it with the virStorageSource
based on the name.
The association is brought into virStorageSource as security labelling
code will need to access the FD to perform selinux labelling.
Similarly when startup is complete in certain cases we no longer need to
keep the copy of FDs and thus can close them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The new helper qemuDomainStartupCleanup is used to perform cleanup after
a startup of a VM (successful or not). The initial implementation just
calls qemuDomainSecretDestroy, which can be un-exported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Implement passing and storage of FDs for the qemu driver. The FD tuples
are g_object instances stored in a per-domain hash table and are
automatically removed once the connection is closed.
In the future we can consider supporting also to not tie the lifetime of
the passed FDs bound to the connection.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The patch moving the code didn't faithfully represent the typecasting
of the 'bandwidth' variable needed to properly convert from the legacy
'unsigned long' argument which resulted in a build failure on 32 bit
systems:
../src/qemu/qemu_block.c: In function ‘qemuBlockCommit’:
../src/qemu/qemu_block.c:3249:23: error: comparison is always false due to limited range of data type [-Werror=type-limits]
3249 | if (bandwidth > LLONG_MAX >> 20) {
| ^
Fix it by returning the check into qemuDomainBlockCommit as it's needed
only because of the legacy argument type in the old API and use
'unsigned long long' for qemuBlockCommit.
Fixes: f5a77198bf
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Some compilers aren't happy when an automatically freed variable is used
just to free something (thus it's only assigned in the code):
When compiling qemuSnapshotDelete after recent commits they complain:
../src/qemu/qemu_snapshot.c:3153:61: error: variable 'delData' set but not used [-Werror,-Wunused-but-set-variable]
g_autoslist(qemuSnapshotDeleteExternalData) delData = NULL;
^
To work around the issue we can restructure the code which also has the
following semantic implications:
- since qemuSnapshotDeleteExternalPrepare does validation we error out
sooner than attempting to start the VM
- we read the temporary variable at least in one code path
Fixes: 4a4d89a925
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
If the daemon crashes or is restarted while the snapshot delete is in
progress we have to handle it gracefully to not leave any block jobs
active.
For now we will simply abort the snapshot delete operation so user can
start it again. We need to refuse deleting external snapshots if there
is already another active job as we would have to figure out which jobs
we can abort.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When daemon is restarted and libvirt tries to recover domain jobs we
need to know if the snapshot job was a snapshot delete in order to
safely abort running QEMU block jobs.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When deleting external snapshots the operation may fail at any point
which could lead to situation that some disks finished the block commit
operation but for some disks it failed and the libvirt job ends.
In order to make sure that the qcow2 images are in consistent state
introduce new element "<snapshotDeleteInProgress/>" that will mark the
disk in snapshot metadata as invalid until the snapshot delete is
completed successfully.
This will prevent deleting snapshot with the invalid disk and in future
reverting to snapshot with the invalid disk.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
With external snapshots we need to modify the metadata bit more then
what is required for internal snapshots. Mainly the storage source
location changes with every external snapshot.
This means that if we delete non-leaf snapshot we need to update all
children snapshots and modify the disk sources for all affected disks.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When deleting snapshot we are starting block-commit job over all disks
that are part of the snapshot.
This operation may fail as it writes data changes to the backing qcow2
image so we need to wait for all the disks to finish the operation and
wait for correct signal from QEMU. If deleting active snapshot we will
get `ready` signal and for inactive snapshots we need to disable
autofinalize in order to get `pending` signal.
At this point if commit for any disk fails for some reason and we abort
the VM is still in consistent state and user can fix the reason why the
deletion failed.
After that we do `pivot` or `finalize` if it's active snapshot or not to
finish the block job. It still may fail but there is nothing else we can
do about it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In order to save some CPU cycles we will collect all the necessary data
to delete external snapshot before we even start. They will be later
used by code that deletes the snapshots and updates metadata when
needed.
With external snapshots we need data that libvirt gets from running QEMU
process so if the VM is not running we need to start paused QEMU process
for the snapshot deletion and kill at afterwards.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Deleting external snapshots will require to run it as async domain job,
the same way as we do for snapshot creation.
For internal snapshots modify the job mask in order to forbid any other
job to be started.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Deleting internal snapshot when the currently active disk image is
different than where the internal snapshot was taken doesn't work
correctly.
This applies to a running VM only as we are using QMP command and
talking to the QEMU process that is using different disk.
This works correctly when the VM is shut of as in this case we spawn
qemu-img process to delete the snapshot.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Prepare the validation function for external snapshot delete support.
There is one exception when deleting `children-only` snapshots. If the
snapshot tree is like this example:
snap1 (external)
|
+- snap2 (internal)
|
+- snap3 (internal)
|
+- snap4 (internal)
and user calls `snapshot-delete snap1 --children-only` the current
snapshot is external but all the children snapshots are internal only
and we are able to delete it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Extract the code deleting external snapshot metadata to separate
function.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Previously the reparent happened before the actual snapshot deletion.
This change moves the code closer to the rest of the code handling
snapshot metadata when deletion happens. This makes the metadate
deletion happen after the data files are deleted.
Following patch will extract it into separate function
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This simplifies the code a bit by reusing existing parts that deletes
a single snapshot.
The drawback of this change is that we will now call the re-parent bits
to keep the metadata in sync for every child even though it will get
deleted as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Extract code that deletes children of specific snapshot to separate
function.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Extract code that deletes single snapshot to separate function.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Move code around to make it clear what is called when deleting single
snapshot or children snapshots.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
QEMU emits this signal when the job finished its work and is about to be
finalized. If the job is started with autofinalize disabled the job
waits for user input to finalize the job.
This will be used by snapshot delete code.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The created job will be needed by external snapshot delete code so
rework qemuBlockCommit to return that pointer.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
External snapshots will use this to synchronize qemu block jobs.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Deleting external snapshots will require configuring autofinalize to
synchronize the block jobs for disks withing single snapshot in order to
be able safely abort of one of the jobs fails.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Upcoming snapshot deletion code will require that multiple commit jobs
are finished in sync. To allow aborting then if one fails we will need
to use manual finalization of the jobs.
This commit implements the monitor code for `job-finalize`.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This will allow to use it while having async domain job active which we
will use when deleting external snapshots.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This will allow to use it while having async domain job active which we
will use when deleting external snapshots. At the same time we will need
to have the block job started as synchronous.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Move the code for finishing a job in the ready state to qemu_block.c.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Up until commit 629282d884, using mode=restrictive caused
virNumaSetupMemoryPolicy() to be called from qemuProcessHook(),
and that in turn resulted in virNumaNodesetIsAvailable() being
called and the nodeset being validated.
After that change, the only validation for the nodeset is the one
happening in qemuBuildMemoryBackendProps(), which is skipped when
using mode=restrictive.
Make sure virNumaNodesetIsAvailable() is called whenever a
nodeset has been provided by the user, regardless of the mode.
https://bugzilla.redhat.com/show_bug.cgi?id=2156289
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When post-copy migration fails, the domain stays running on the
destination with a VIR_DOMAIN_RUNNING_POSTCOPY_FAILED reason. Both the
state and the reason can later be rewritten in case the domain gets
paused for other reasons (such as an I/O error). Thus we need a separate
place to remember the post-copy migration failed to be able to resume
the migration.
https://bugzilla.redhat.com/show_bug.cgi?id=2111948
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The parameter was only used to select which states correspond to an
active or failed post-copy migration. But these states are either
applicable to both operations or the check would just paper over a code
bug in case of an impossible combination of state and operation. By
dropping the check we can make the code simpler and also reuse existing
virDomainObjIsFailedPostcopy function and only check for active
post-copy states.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The qemu driver uses connection close callbacks in more places requiring
more changes than other drivers, but luckily the changes are very
straightforward. The migration code was written in a way ensuring that
there's just one callback present so this can be preserved directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function can't fail so there's no point in returning anything.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
1.clear passwd in debug log
2.alignment
3.use the same variable name for function definition and declaration
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In a recent commit I've introduced an umount() call. But the
function where the call lives is compiled on all OSes, not just
Linux. But umount() is Linux specific. Other OSes have unmount
(FreeBSD), or maybe something else. But since namespaces are
Linux specific, we can wrap the call in #ifdef __linux__ and not
care about other OSes.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When calling virConnectGetDomainCapabilities() (exposed as virsh
domcapabilities) users have option to specify whatever sub-set of
{ emulatorbin, arch, machine, virttype } they want. Then we have
a logic (hidden in virQEMUCapsCacheLookupDefault()) that picks
qemuCaps that satisfy values passed by user. And whatever was not
specified is then set to the default value as specified by picked
qemuCaps. For instance: if no machine type was provided but
emulatorbin was, then the machine type is set to the default one
as defined by the emulatorbin.
Or, when just virttype was set then the remaining three values
are set to their respective defaults. Except, we have a crasher
in this case:
# virsh domcapabilities --virttype hvf
error: Disconnected from qemu:///system due to end of file
error: failed to get emulator capabilities
error: End of file while reading data: Input/output error
This is because for 'hvf' virttype (at least my) QEMU does not
have any machine type. Therefore, @machine is set to NULL and the
rest of the code does not expect that.
What we can do about this is to validate all arguments. Well,
except for the emulatorbin which is obtained from passed
qemuCaps. This also fixes the issue when domcapabilities for a
virttype of a different driver are requested, or a different
arch.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When deciding whether to bind mount a path in domain's namespace,
we look at the QEMU mount table (/proc/$pid/mounts) and try to
match prefix of given path with one of mount points. Well, we
do that in a bit clumsy way. For instance, if there's
"/dev/hugepages" already mounted inside the namespace and we are
deciding whether to bind mount "/dev/hugepages1G/..." we decide
to skip over the path and NOT bind mount it. This is because
plain STRPREFIX() is used and yes, the former is prefix of the
latter. What we need to check also is whether the next character
after the prefix is slash.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Our code relies on mount events propagating into the namespace we
create for a domain. However, there's one caveat. In v8.8.0-rc1~8
I've tried to make us detect differences in mount tables between
the namespace in which libvirtd runs and the domain namespace.
This is crucial for any mounts that happen after the domain was
started (for instance new hugetlbfs can be mounted on say
/dev/hugepages1G).
Therefore, we take a look into /proc/$(pgrep qemu)/mounts to see
what filesystems are mounted under /dev. Now, since we don't
umount the original /dev, just mount a tmpfs over it, we get all
the events (e.g. aforementioned hugetlbfs mount on
/dev/hugepages1G), but we are not really able to access it
because of the tmpfs that's placed on top. This then confuses our
algorithm for detecting which filesystems are mounted (the
algorithm is implemented in qemuDomainGetPreservedMounts()).
To break the link between host's and guest's /dev we just need to
umount() the original /dev in the namespace. Just before our
artificially created tmpfs is moved into its place.
Fixes: 46b03819ae
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2151869#c6
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Inside of qemuCaps (for the corresponding accelerator) we have
full host CPU expansion stored, among with supported Hyper-V
Enlightenments. To report them in the domain capabilities, we
just have to pick those starting with "hv-" and see if we know
them.
You may notice that neither of our domaincapsdata test shows any
enlightenment. This is because the test works by parsing
corresponding qemucapabilitiesdata/caps_*.xml file and none of
these store the full host CPU expansion (hostCPU.fullQEMU)
because that is runtime piece of information and not formatted
into virQEMUCaps XML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1717611
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now that we have qemuMonitorGetCPUModelExpansion() aware of
Hyper-V Enlightenments, we can start querying it. Two conditions
need to be met:
1) KVM is in use,
2) Arch is either x86 or arm.
It may look like modifying the first call to
qemuMonitorGetCPUModelExpansion() inside of
virQEMUCapsProbeQMPHostCPU() would be sufficient but it is not.
We really need to ask QEMU for full expansion and the first call
does not guarantee that.
For the test data, I've just copied whatever
'query-cpu-model-expansion' returned earlier, therefore there are
no hv-* props. But that's okay - the full expansion is not stored
in cache (and thus not formatted in
tests/qemucapabilitiesdata/caps_*.replies files either). This is
purely runtime thing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This continues and finishes propagation of the @hv_passthrough
argument started in the previous commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Apart from setting @migratable prop to the
query-cpu-model-expansion command, we will need @hv-passthrough
so that we can query for expansion of Hyper-V Enlightenments
supported on the current host. The idea is to run:
{
"execute": "query-cpu-model-expansion",
"arguments": {
"type": "full",
"model": {
"name": "host",
"props": {
"hv-passthrough": true
}
}
}
}
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In a recent commit, when ditching virXPathULong() the parsing of
<selfvers/> was changed. But it was changed to virXMLPropUInt()
which is not correct because the value we're interested in is not
in an attribute but element itself.
Fixes: a3c7426839
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The @hash variable inside of virQEMUCapsProbeQMPHostCPU() is used
only within a block, but declared at the beginning of the
function. Bring the variable declaration into the said block.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
After previous cleanup this function is no longer used and thus
can be dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When starting swtpm binary, the qemuSecurityStartTPMEmulator() is
called which sets seclabel on the TPM state and then uses
qemuSecurityCommandRun() to execute the swtpm binary with proper
seclabel. Well, the aim is to ditch
qemuSecurityStartTPMEmulator() because it entangles two distinct
operations. Just call functions for them separately.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
