Commit id '4f846170' added printing of a new field 'part_separator';
however, neglected to do so when there was an "freeExtent" defined
for the device (as there would be when the disk pool was started).
This patch adjusts the logic to appropriately format the device path and
if there the part_separator attribute.
Commit 'ef2ab8fd' moved just the virDomainConfNWFilterTeardown and left
the logic to save/restore the current error essentially doing nothing
in the error path for qemuBuildCommandLine. So move it to where it
was meant to be.
Although the original code would reset the filter on command creation
errors after building the network command portion and commit 'ef2ab8fd'
altered that logic, the teardown is called during qemuProcessStop from
virDomainConfVMNWFilterTeardown and that code has the save/restore
last error logic, so just allow that code to handle the teardown rather
than running it twice. The qemuProcessStop would be called in the failure
path of qemuBuildCommandLine.
Currently we spawn couple of binaries in our test suite.
Moreover, we provide some spoofed versions of system binaries
hoping that those will be executed instead of the system ones.
For instance, for testing SSH socket we have written our own ssh
binary for producing predictable results. We certainly don't want
to execute the system ssh binary.
However, in order to prefer our binaries over system ones, we
need to set PATH environment variable. But this is done only at
the Makefile level. So if anybody runs a test by hand that
expects our spoofed binary, the test ends up executing real
system binaries. This is not good. In fact, it's terribly wrong.
The fix lies in a small trick - putting our build directory at
the beginning of the PATH environment variable in each test.
Hopefully, since every test has this VIRT_TEST_MAIN* wrapper, we
can fix this at a single place.
Moreover, while this removes setting PATH for our tests written
in bash, it's safe as we are not calling anything ours that would
require PATH change there.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We include the file in plenty of places. This is mostly due to
historical reasons. The only place that needs something from the
header file is storage_backend_fs which opens _PATH_MOUNTED. But
it gets the file included indirectly via mntent.h. At no other
place in our code we need _PATH_.*. Drop the include and
configure check then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Missing modules is a common expected scenario for most libvirt usage on
RPM distributions like Fedora, so it doesn't really warrant logging at
WARN level. Use INFO instead
https://bugzilla.redhat.com/show_bug.cgi?id=1274849
It does not have a suffix ByName because there are no other means of
looking up the server and since the name is known, this should be the
preferred one.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Mostly it is just passing new parameter here and there. In case
of zero value we fallback to auto selecting port and thus keep
backward compatibility.
Also we need to fix places of auto selected port managment.
We should bother only when auto selected was done that is
when externally specified port is not 0.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Some hypervisors (namely qemu) can have a separate connecton for
non-shared disks migration of active domains. Currently we have
no means to control the port of such a connection. At the same
time we have options to control port of memory migration traffic
(thru migration uri) as well as interfaces that target server
is bound to for incoming migration (thru VIR_MIGRATE_PARAM_LISTEN_ADDRESS).
Let's add the option for setting disks port too.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1271183
We only wait 0.5 seconds for the session daemon to start up and present
its socket, which isn't sufficient for many users. Bump up the sleep
interval and retry amount so we wait for a total of 5.0 seconds.
Refactor series 0b231195 worked with virLogDestination type which, depending
on the compiler, might be (and probably will be) an unsigned data type.
However, virEnumFromString may return -1 in case of an error. So, when enum
happens to be unsigned, some compilers will naturally complain about foo:
'if (foo < 0)'
Each version of virtuozzo supports only one type of SCSI controller
So if we add disk on SCSI bus, we should set SCSI controller model.
We can take it from vzCapabilities structure.
Because Vz6 supports SCSI(BUSLOGIC), IDE and SATA controllers only and
Vz7 supports SCSI(VIRTIO_SCSI) and IDE only we add list of supported
controllers and scsi models to vzCapabilities structure.
When a new connection opens, we select proper capabilities values according
to Virtuozzo version and check them in XMLPostParse.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
We should report correct disk format depending on vz version and domain type.
Since we support only one disk format for each domain type, we can take it
from vzCapabilities structure.
As long as we have another function checking disk parameters correctness,
let's have them in one place. Here we change prefix of the moved function and
start to call it from vzCheckUnsupportedDisks rather than add disk.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
As far as Virtuozzo6 and Virtuozzo7 support different disk types for virtual
machines (ploop and qcow2 respectively) and different buses (vz6: IDE, SCSI,
SATA; vz7: IDE SCSI) we add vzCapabilities structure to help undestand which
disk formats and buses are supported in the context of a current connection.
When a new connection opens, we select proper capabilities in accordance to
current Virtuozzo version.
The problem with the original virLogParseOutputs method was that the way it
parsed the input, walking the string char by char and using absolute jumps
depending on the virLogDestination type, was rather complicated to read.
This patch utilizes virStringSplit method twice, first time to filter out any
spaces and split the input to individual log outputs and then for each
individual output to tokenize it by to the parts according to our
PRIORITY:DESTINATION?(:DATA) format. Also, to STREQLEN for matching destination
was replaced with virDestinationTypeFromString call.
In order to refactor the ugly virLogParseOutputs method, this is a neat way of
finding out whether the destination type (in the form of a string) user
provided is a valid one. As a bonus, if it turns out it is valid, we get the
actual enum which will later be passed to any of virLogAddOutput methods right
away.
Patch adds a generic DO_TEST_FULL macro, some PASS/FAIL macros to better
visually distinguish tests that should fail and tests that should pass. Also,
some cosmetic changes like renames and direct call to fprintf is replaced with
our VIR_TEST_DEBUG macro, as using testutils should be our preferred way of
reporting errors in tests.
Just a cleanup I stumbled upon in one of my older branches I did when
browsing through some code and forgot to send it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In qemuConnectDomainXMLToNative() we set up the monitor, but we never
memset() it to zeros. Thanks to the introduction of the logfile
parameter of chardevs (and the logfile member of the struct), we started
checking whether that's non-NULL and that exposed this old error.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reverting to a snapshot may change domain configuration. New
configuration should be saved if domain has persistent flag.
VIR_DOMAIN_EVENT_DEFINED_FROM_SNAPSHOT is emitted in case of
configuration update.
Add new function to manage adding the panic device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the NVRAM device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the RNG device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also modify the qemuBuildRNGDevStr to use const virDomainDef instead
of virDomainDefPtr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the memballoon device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also modify the qemuBuildMemballoonDevStr to use const virDomainDef
instead of virDomainDefPtr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the host device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also modify qemuBuildPCIHostdevDevStr, qemuBuildUSBHostdevDevStr,
and qemuBuildSCSIHostdevDevStr to use const virDomainDef instead
of virDomainDefPtr.
Make qemuBuildPCIHostdevPCIDevStr and qemuBuildUSBHostdevUSBDevStr
static to the qemu_command.c.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the redirdev device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also move the qemuBuildRedirdevDevStr closer to the new function and
modify to use the const virDomainDef instead of virDomainDefPtr
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the watchdog device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also since qemuBuildWatchdogDevStr was only local here, make it static as
well as modifying the const virDomainDef.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the sound device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also since qemuBuildSoundDevStr was only local here, make it static as
well as modifying the const virDomainDef.
Signed-off-by: John Ferlan <jferlan@redhat.com>
These comments explain the difference between a virPCIDevice
instance used for lookups and an actual device instance; some
information is also provided for specific uses.
virHostdevGetPCIHostDeviceList() is similar but does not filter out
devices that are not in the active list; that said, we are looking
up the device in the active list just a few lines after anyway, so
we might as well just keep a single function around.
This also helps stress the fact the objects contained in pcidevs are
only for looking up the actual devices, which is something later
commits will make even more explicit.
The docs claims the cache attribute of the disk <driver>
element supports 'default' as one of its permissible values,
but such configuration fails virt-xml-validate. Add 'default'
as one of the cache attribute choices in domaincommon.rng.
We're in the hostdev module, so mgr is not an ambiguous name, and
in fact it's already used in some cases. Switch all the code over.
Take the chance to shorten declaration of
virHostdevIsPCINodeDeviceUsedData structures.
When we want to look up a device in a device list and we already
have the IDs from another source, we can simply use
virPCIDeviceListFindByIDs() instead of creating a temporary device
object.
If 'last_processed_hostdev_vf != -1' is false then, since the
loop counter 'i' starts at 0, 'i <= last_processed_hostdev_vf'
can't possibly be true and the loop body will never be executed.
However, since 'i' is unsigned and 'last_processed_hostdev_vf'
is signed, we can't just get rid of the check completely; what
we can do is move it outside of the loop to avoid checking its
value on every iteration and cluttering the actual loop
condition.
Since commit 9c14a9ab we have broken active domain listing
because reworked prlsdkLoadDomain doesn't set dom->def->id
propely. It just looses it when a new def structure is set.
Now we make prlsdkConvertDomainState function return void
and move calling it after an old dom->def is replaces with
a new one within prlsdkLoadDomain function.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
This function can be called over a domain definition that has no
video configured. The
tests/qemuxml2argvdata/qemuxml2argv-minimal.xml file could serve
as an example. Problem is, before the check that domain has some
or none video configured, def->videos is dereferenced causing a
segmentation fault in case there's none video configured.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add new function to manage adding the video device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Signed-off-by: John Ferlan <jferlan@redhat.com>
