When trying to set numatune mode directly using virsh numatune command,
correct error is raised, however numatune structure was not deallocated,
thus resulting in creating an empty numatune element in the guest XML,
if none was present before. Running the same command aftewards results
in a successful change with broken XML structure. Patch fixes the
deallocation problem as well as checking for invalid attribute
combination VIR_DOMAIN_NUMATUNE_PLACEMENT_AUTO + a nonempty nodeset.
Resolves https://bugzilla.redhat.com/show_bug.cgi?id=1129998
Currently, qemu driver uses qemuTranslateDiskSourcePool()
to translate disk volume information. This function is
general enough and could be used for other drivers as well,
so move it to conf/domain_conf.c along with its helpers.
- qemuTranslateDiskSourcePool: move to storage/storage_driver.c
and rename to virStorageTranslateDiskSourcePool,
- qemuAddISCSIPoolSourceHost: move to storage/storage_driver.c
and rename to virStorageAddISCSIPoolSourceHost,
- qemuTranslateDiskSourcePoolAuth: move to storage/storage_driver.c
and rename to virStorageTranslateDiskSourcePoolAuth,
- Update users of qemuTranslateDiskSourcePool to use a
new name.
Introduce a new structure to handle an iSCSI host device based on the
existing virDomainHostdevSubsysSCSI by adding a "protocol='iscsi'" to
the <source/> element. The existing scsi_host subsystem RNG was modified
to read an optional "protocol='adapter'", although it won't be written
out nor is it documented as an option (by choice).
The new hostdev structure mimics the existing <disk/> element for an
iSCSI device (network) device. New XML is:
<hostdev mode='subsystem' type='scsi' managed='yes'>
<source protocol='iscsi' name='iqn.1992-01.com.example'>
<host name='example.org' port='3260'/>
<auth username='myname'>
<secret type='iscsi' usage='mycluster_myname'/>
</auth>
</source>
<address type='drive' controller='0' bus='0' target='2' unit='5'/>
</hostdev>
The controller element will mimic the existing scsi_host code insomuch
as when 'lsi' and 'virtio-scsi' are used.
Use better detection of hugetlbfs mount points. Yes, there can be
multiple mount points each serving different huge page size.
Since we already have ability to override the mount point in the
qemu.conf file, this crazy backward compatibility code is brought in.
Now we allow multiple mount points, so the "hugetlbfs_mount" option
must take an list of strings (mount points). But previously, it was
just a string, so we must accept both types now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently, we only bind the whole QEMU domain to memory nodes
specified in nodemask altogether. That, however, doesn't make much
sense when one wants to control from where the memory for particular
guest nodes should be allocated. QEMU allows us to do that by
specifying 'host-nodes' parameter for the 'memory-backend-ram' object,
so let's use that.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In XML format, by definition, order of fields should not matter, so
order of parsing the elements doesn't affect the end result. When
specifying guest NUMA cells, we depend only on the order of the 'cell'
elements. With this patch all older domain XMLs are parsed as before,
but with the 'id' attribute they are parsed and formatted according to
that field. This will be useful when we have tuning settings for
particular guest NUMA node.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch adds support for the QEMU vhost-user feature to libvirt.
vhost-user enables the communication between a QEMU virtual machine
and other userspace process using the Virtio transport protocol.
It uses a char dev (e.g. Unix socket) for the control plane,
while the data plane based on shared memory.
The XML looks like:
<interface type='vhostuser'>
<mac address='52:54:00:3b:83:1a'/>
<source type='unix' path='/tmp/vhost.sock' mode='server'/>
<model type='virtio'/>
</interface>
Signed-off-by: Michele Paolino <m.paolino@virtualopensystems.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1066894
With current code it's possible to have for instance:
virsh dumpxml mydomain | grep seclabel
<seclabel type='dynamic' model='selinux' relabel='yes'/>
<seclabel type='dynamic' model='selinux' relabel='yes'/>
<seclabel type='dynamic' model='selinux' relabel='yes'/>
<seclabel type='dynamic' model='selinux' relabel='yes'/>
<seclabel type='dynamic' model='selinux' relabel='yes'/>
what doesn't make any sense. We should reject the XML in the config
parsing phase.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This introduces two new attributes "cmd_per_lun" and "max_sectors" same
with the names QEMU uses for virtio-scsi. An example of the XML:
<controller type='scsi' index='0' model='virtio-scsi' cmd_per_lun='50'
max_sectors='512'/>
The corresponding QEMU command line:
-device virtio-scsi-pci,id=scsi0,cmd_per_lun=50,max_sectors=512,
bus=pci.0,addr=0x3
Signed-off-by: Mike Perez <thingee@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
There are no options to parse here other than the name of the device,
and all three possible device names have the same prefix
("virtio-balloon" with "-ccw", "-pci", or "-device" appended), so the
code is fairly simple. It has been implemented such that it will be
easier to add handling for other -device entries that aren't otherwise
recognized - just add another "else if (STRPREFIX(opts, ....)" clause.
qemuParseCommandLineString() previously would always add a <memballoon
model='virtio'/> to every result (the comments erroneously say that it
is adding a <memballoon model='none'/>) This has been changed to add
model='none', and 84 test case xml's updated accordingly (so that
qemuxml2argvtest won't fail).
Now that the memballoon device is properly parsed, we can safely add a
test for properly ignoring -nodefconfig and -nodefaults. Rather than
adding an entire new test case for this (and memballoon), we just
randomly pick the clock-utc test and modify it slightly to fulfill the
purpose.
Coverity checks for patterns of handling return values of functions.
Some recent addition must have tripped a threshold where coverity now
complains that we usually check the return value of virUUIDGenerate but
don't do it in one place. Add a check to make coverity happy.
QEMU ppce500 board uses the legacy -serial option.
Other PPC boards don't give any way to explicitly wire in a -chardev
except pseries which uses -device spapr-vty with -chardev.
Add test case for -serial option for ppce500
Signed-off-by: Olivia Yin <Hong-Hua.Yin@freescale.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
QEMU commit 5e2ac51 added a boolean '-msg timestamp=[on|off]'
option, which can enable timestamps on errors:
$ qemu-system-x86_64 -msg timestamp=on zghhdorf
2014-04-09T13:25:46.779484Z qemu-system-x86_64: -msg timestamp=on: could
not open disk image zghhdorf: Could not open 'zghhdorf': No such file or
directory
Enable this timestamp if the QEMU binary supports it.
Add a 'log_timestamp' option to qemu.conf for disabling this behavior.
This uses the new QEMU_CAPS_HOST_PCI_MULTIDOMAIN capability when
present, for -devivce pci-assign, -device vfio-pci, and -pcidevice.
While creating tests for this new functionality, I noticed that the
xmls for two existing tests had erroneously specified an
until-now-ignored domain="0x0002", so I corrected those two tests, and
also added two failure tests to be sure that we alert users who
attempt to use a non-zero domain with a qemu that doesn't support it.
When building packages in a clean chroot the QEMU_USER and QEMU_GROUP
don't exist making VirQemuDriverConfigNew fail with privileged=true.
Avoid that by not requiring privileged mode upfront but setting it later
so we skip the user/group existence check.
This solution was suggested by Daniel P. Berrange and tested by Martin
Kletzander.
I noticed that depending on the <driver> attributes the user passed
in, the output may omit the <driver> element altogether. For example,
the rerror_policy has had this problem since commit 4bb4109 in Oct
2011. But in adding testsuite coverage to expose it, I found another
problem: the C code is just fine without a driver name, but the
XML validator required either a name or a cache mode.
* src/conf/domain_conf.c (virDomainDiskDefFormat): Update
conditional.
* docs/schemas/domaincommon.rng (diskDriver): Simplify.
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-copy-on-read.xml:
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-copy-on-read.args:
New files.
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-discard.xml:
Enhance test.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-drive-discard.xml:
Likewise.
* tests/qemuxml2argvtest.c (mymain): New test.
* tests/qemuxml2xmltest.c (mymain): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Currently, <cputune><shares>0</shares></cputune> is treated
as if it were not specified.
Treat is as a valid value if it was explicitly specified
and write it to the cgroups.
Commit a1cbe4b5 added a check for spaces around assignments and this
patch extends it to checks for spaces around '=='. One exception is
virAssertCmpInt where comma after '==' is acceptable (since it is a
macro and '==' is its argument).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The previous OOM testing support would re-run the entire "main"
method each iteration, failing a different malloc each time.
When a test suite has 'n' allocations, the number of repeats
requires is (n * (n + 1) ) / 2. This gets very large, very
quickly.
This new OOM testing support instead integrates at the
virtTestRun level, so each individual test case gets repeated,
instead of the entire test suite. This means the values of
'n' are orders of magnitude smaller.
The simple usage is
$ VIR_TEST_OOM=1 ./qemuxml2argvtest
...
29) QEMU XML-2-ARGV clock-utc ... OK
Test OOM for nalloc=36 .................................... OK
30) QEMU XML-2-ARGV clock-localtime ... OK
Test OOM for nalloc=36 .................................... OK
31) QEMU XML-2-ARGV clock-france ... OK
Test OOM for nalloc=38 ...................................... OK
...
the second lines reports how many mallocs have to be failed, and thus
how many repeats of the test will be run.
If it crashes, then running under valgrind will often show the problem
$ VIR_TEST_OOM=1 ../run valgrind ./qemuxml2argvtest
When debugging problems it is also helpful to select an individual
test case
$ VIR_TEST_RANGE=30 VIR_TEST_OOM=1 ../run valgrind ./qemuxml2argvtest
When things get really tricky, it is possible to request that just
specific allocs are failed. eg to fail allocs 5 -> 12, use
$ VIR_TEST_RANGE=30 VIR_TEST_OOM=1:5-12 ../run valgrind ./qemuxml2argvtest
In the worse case, you might want to know the stack trace of the
alloc which was failed then VIR_TEST_OOM_TRACE can be set. If it
is set to 1 then it will only print if it thinks a mistake happened.
This is often not reliable, so setting it to 2 will make it print
the stack trace for every alloc that is failed.
$ VIR_TEST_OOM_TRACE=2 VIR_TEST_RANGE=30 VIR_TEST_OOM=1:5-5 ../run valgrind ./qemuxml2argvtest
30) QEMU XML-2-ARGV clock-localtime ... OK
Test OOM for nalloc=36 !virAllocN
/home/berrange/src/virt/libvirt/src/util/viralloc.c:180
virHashCreateFull
/home/berrange/src/virt/libvirt/src/util/virhash.c:144
virDomainDefParseXML
/home/berrange/src/virt/libvirt/src/conf/domain_conf.c:11745
virDomainDefParseNode
/home/berrange/src/virt/libvirt/src/conf/domain_conf.c:12646
virDomainDefParse
/home/berrange/src/virt/libvirt/src/conf/domain_conf.c:12590
testCompareXMLToArgvFiles
/home/berrange/src/virt/libvirt/tests/qemuxml2argvtest.c:106
virtTestRun
/home/berrange/src/virt/libvirt/tests/testutils.c:250
mymain
/home/berrange/src/virt/libvirt/tests/qemuxml2argvtest.c:418 (discriminator 2)
virtTestMain
/home/berrange/src/virt/libvirt/tests/testutils.c:750
??
??:0
_start
??:?
FAILED
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch changes network device type used by default from rtl8139
to virtio when architecture type is aarch64 and machine type is virt.
Qemu doesn't support any other machine types for aarch64 right now and
we can't make any other aarch64-specific tuning in this function yet.
Signed-off-by: Oleg Strikov <oleg.strikov@canonical.com>
Format qemu command line for USB keyboard
and add test cases for it.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Add a new backend for any character device. This backend uses channel
in spice connection. This channel is similar to spicevmc, but
all-purpose in contrast to spicevmc.
Apart from spicevmc, spiceport-backed chardev will not be formatted
into the command-line if there is no spice to use (with test for that
as well). For this I moved the def->graphics counting to the start
of the function so its results can be used in rest of the code even in
the future.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Add a new <timer> for the HyperV reference time counter enlightenment
and the iTSC reference page for Windows guests.
This feature provides a paravirtual approach to track timer events for
the guest (similar to kvmclock) with the option to use real hardware
clock on systems with a iTSC with compensation across various hosts.
According to the documentation describing various tunables for domain
timers not all the fields are supported by all the driver types. Express
these in the RNG:
- rtc, platform: Only these support the "track" attribute.
- tsc: only one to support "frequency" and "mode" attributes
- hpet, pit: tickpolicy/catchup attribute/element
- kvmclock: no extra attributes are supported
Additionally the attributes of the <catchup> element for
tickpolicy='catchup' are optional according to the parsing code. Express
this in the XML and fix a spurious space added while formatting the
<catchup> element and add tests for it.
With my recent work on the test, both time() and localtime() are used.
While mocking the former one, we get predictable result for UTC. But
since the latter function uses timezone to get local time, the result of
localtime() is not so predictive. Therefore, we must set the TZ variable
at the beginning of the test. To be able to catch some things that work
just by a blind chance, I'm choosing a virtual timezone that (hopefully)
no libvirt developer resides in.
When trying to introduce a test for previous patch, I've
noticed that the command line is constructed using current
time. This won't work in our test suite (unless you guys
wants to set a specific time prior to each test run :) ).
Therefore we need to mock calls to time(2) to return the
same value every time it's called.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
spice-server offers an API to disable file transfer messages
on the agent channel between the client and the guest.
This is supported in qemu through the disable-agent-file-xfer option.
This patch exposes this option to libvirt.
Adds a new element 'filetransfer', with one property,
'enable', which accepts a boolean.
Default is enabled, for backward compatibility.
Depends on the capability exported in the first patch of the series.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Any test suite which involves a virDomainDefPtr should
call virDomainDefCheckABIStability with itself just as
a basic sanity check that the identity-comparison always
succeeds. This would have caught the recent NULL pointer
access crash.
Make sure we cope with def->name being NULL since the
VMWare config parser produces NULL names.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
AArch64 qemu has similar behavior as armv7l, like use of mmio etc.
This patch adds similar bypass checks what we have for armv7l to aarch64.
E.g. we are enabling mmio transport for Nicdev.
Making addDefaultUSB and addDefaultMemballoon to false etc.
V3:
- Adding missing domain rng schema for aarcg64 and test case in
testutilsqemu.c which was causing test suite failure
while running make check.
V2:
- Added testcase to qemuxml2argvtest as suggested
during review comments of V1.
V1:
- Initial patch.
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Do not leave the PCI address of the primary video card set
to the legacy default (0000:00:02.0) if we're doing two-pass
allocation.
Since QEMU 1.6 (QEMU_CAPS_VIDEO_PRIMARY) we allow the primary
video card to be on other slots than 0000:00:02.0 (as we use
-device instead of -vga).
However we fail to assign it an address if:
* another device explicitly uses 0000:00:02.0 and
* the primary video device has no address specified
On the first pass, we have set the address to default, then checked
if it's available, leaving it set even if it wasn't. This address
got picked up by the second pass, resulting in a conflict:
XML error: Attempted double use of PCI slot 0000:00:02.0
(may need "multifunction='on'" for device on function 0)
Also fix the test that was supposed to catch this.
Map the new <panic> device in XML to the '-device pvpanic' command
line of qemu. Clients can then couple the <panic> device and the
<on_crash> directive to control behavior when the guest reports
a panic to qemu.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
When changing memtune limits to unlimited with AFFECT_CONFIG, the
values in virDomainDef are set to PARAM_UNLIMITED, which causes the
whole <memtune> to be formatted. This can be changed in all drivers,
but it also makes sense to use the default (0) as another value for
"unlimited", since zero memory limit makes no sense.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=888635
(which was already closed as CANTFIX because the qemu "-boot strict"
commandline option wasn't available at the time).
Problem: you couldn't have a domain that used PXE to boot, but also
had an un-bootable disk device *even if that disk wasn't listed in the
boot order*, because if PXE timed out (e.g. due to the bridge
forwarding delay), the BIOS would move on to the next target, which
would be the unbootable disk device (again - even though it wasn't
given a boot order), and get stuck at a "BOOT DISK FAILURE, PRESS ANY
KEY" message until a user intervened.
The solution available since sometime around QEMU 1.5, is to add
"-boot strict=on" to *every* qemu command. When this is done, if any
devices have a boot order specified, then QEMU will *only* attempt to
boot from those devices that have an explicit boot order, ignoring the
rest.
To support testing of "volume" disk backing, we need to implement a few
disk driver backend functions.
The fake storage driver uses files in storagepoolxml2xmlout/POOLNAME.xml
as XML files for pool definitions and volume names are in format
"VOL_TYPE+VOL_PATH". By default type "block" is assumed (for iSCSI test
compatibility).
The choice of this approach along with implemented functions was made so
that <disk type='volume'> can be tested in the xml2argv test.
While trying to debug a failure of virpcitest during 'make distcheck',
I noticed that with a VPATH build, 'cd tests; ./virpcitest' fails for
an entirely different reason. To reproduce the distcheck failure, I
had to run 'cd tests; abs_srcdir=/path/to/src ./virpcitest'. But we
document in HACKING that all of our tests are supposed to be runnable
without requiring extra environment variables.
The solution: hardcode the location of srcdir into the just-built
binaries, rather than requiring make to prepopulate environment
variables. With this, './virpcitest' passes even in a VPATH build
(provided that $(srcdir) is writable; a followup patch will fix the
conditions required by 'make distcheck'). [Note: the makefile must
still pass on directory variables to the test environment of shell
scripts, since those aren't compiled. So while this solves the case
of a compiled test, it still requires environment variables to pass
a VPATH build of any shell script test case that relies on srcdir.]
* tests/Makefile.am (AM_CFLAGS): Define abs_srcdir in all compiled
tests.
* tests/testutils.h (abs_srcdir): Quit declaring.
* tests/testutils.c (virtTestMain): Rely on define rather than
environment variable.
* tests/virpcimock.c (pci_device_new_from_stub): Rely on define.
* tests/cputest.c (mymain): Adjust abs_top_srcdir default.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxmlnstest.c (mymain): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
These changes allow the correct virtio-blk-device and virtio-net-device
devices to be used for the 'virt' machine type for armv7 rather than the
PCI virtio devices.
A test case was added to qemuxml2argvtest for this change.
Signed-off-by: Clark Laughlin <clark.laughlin@linaro.org>
https://bugzilla.redhat.com/show_bug.cgi?id=1027096
If there's the following snippet in the domain XML, the domain will be
lost upon the daemon restart (if the domain is started prior restart):
<seclabel type='dynamic' relabel='yes'/>
The problem is, the 'label', 'imagelabel' and 'baselabel' are parsed
whenever the VIR_DOMAIN_XML_INACTIVE is *not* present or the label is
static. The latter is not our case, obviously. So, when libvirtd starts
up, it finds domain state xml and parse it. During parsing, many XML
flags are enabled but VIR_DOMAIN_XML_INACTIVE. Hence, our parser tries
to extract 'label', 'imagelabel' and 'baselabel' from the XML which
fails for model='none'. Err, this model - even though not specified in
XML - can be taken from qemu wide config file: /etc/libvirtd/qemu.conf.
However, in order to know we are dealing with model='none' the code in
question must be moved forward a bit. Then a new check must be
introduced. This is what the first two chunks are doing.
But this alone is not sufficient. The domain state XML won't contain the
model attribute without slight modification. The model should be
inserted into the XML even if equal to 'none' and the state XML is being
generated - what if the origin (the @security_driver variable in
qemu.conf) changes during libvirtd restarts?
At the end, a test to catch this scenario is introduced.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The linux kernel recently added support for paravirtual spinlock
handling to avoid performance regressions on overcomitted hosts. This
feature needs to be turned in the hypervisor so that the guest OS is
notified about the possible support.
This patch adds a new feature "paravirt-spinlock" to the XML and
supporting code to enable the "kvm_pv_unhalt" pseudo CPU feature in
qemu.
https://bugzilla.redhat.com/show_bug.cgi?id=1008989
QEMU has support for SASL auth for SPICE guests, but libvirt
has no way to enable it. Following the example from VNC where
it is globally enabled via qemu.conf
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Prefer using VFIO (if available) to the legacy KVM device passthrough.
With this patch a PCI passthrough device without the driver configured
will be started with VFIO if it's available on the host. If not legacy
KVM passthrough is checked and error is reported if it's not available.
The following XML is the recommended default clock configuration for
qemu:
<clock offset='utc'>
<timer name='rtc' tickpolicy='catchup'/>
<timer name='pit' tickpolicy='delay'/>
<timer name='hpet' present='no'/>
</clock>
However we weren't testing any of those timer elements.
The test case average timing code has not been used by any test
case ever. Delete it to remove complexity.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since commit 297c99a5 an invalid source definition XML of a character
device that is used as backend for RNG devices, smartcards and redirdevs
causes crash of the daemon when parsing such a definition.
The device types mentioned above are not a part of a regular character
device but are backends for other types. Thus when parsing such device
NULL is passed as the argument @chr_def. Later when checking the
validity of the definition @chr_def was dereferenced when parsing a UNIX
socket backend with missing path of the socket and crashed the daemon.
Sample offending configuration:
<devices>
...
<rng model='virtio'>
<backend model='egd' type='unix'>
<source mode='bind' service='1024'/>
</backend>
</rng>
</devices>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1012196
This resolves one of the issues in:
https://bugzilla.redhat.com/show_bug.cgi?id=1003983
This device is identical to qemu's "intel-hda" device (known as "ich6"
in libvirt), but has a different PCI device ID (which matches the ID
of the hda audio built into the ich9 chipset, of course). It's not
supported in earlier versions of qemu, so it requires a capability
bit.
qemu/KVM also supports a tftp URL while specifying the cdrom ISO image.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='tftp' name='/url/path'>
<host name='host.name' port='69'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
The ftps protocol is another protocol supported by qemu/KVM while specifying
the cdrom ISO image.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='ftps' name='/url/path'>
<host name='host.name' port='990'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
The https protocol is also accepted by qemu/KVM when specifying the cdrom ISO
image.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='https' name='/url/path'>
<host name='host.name' port='443'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
Commit ef5d51d fixed a crash for numatune with auto placement and
nodeset specified:
<numatune>
<memory mode='preferred' placement='auto' nodeset='0'/>
</numatune>
Starting with qemu 1.6, the qemu-system-arm vexpress-a9 model has a
hardcoded virtio-mmio transport which enables attaching all virtio
devices.
On the command line, we have to use virtio-XXX-device rather than
virtio-XXX-pci, thankfully s390 already set the precedent here so
it's fairly straight forward.
At the XML level, this adds a new device address type virtio-mmio.
The controller and addressing don't have any subelements at the
moment because we they aren't needed for this usecase, but could
be added later if needed.
Add a test case for an ARM guest with one of every virtio device
enabled.
Similar to the chardev bit, ARM boards depend on the old style '-net nic'
for actually instantiating net devices. But we can't block out
-netdev altogether since it's needed for upcoming virtio support.
And add tests for working ARM XML with console, disk, and networking.
Add an attribute named 'removable' to the 'target' element of disks,
which controls the removable flag. For instance, on a Linux guest it
controls the value of /sys/block/$dev/removable. This option is only
valid for USB disks (i.e. bus='usb'), and its default value is 'off',
which is the same behaviour as before.
To achieve this, 'removable=on' (or 'off') is appended to the '-device
usb-storage' parameter sent to qemu when adding a USB disk via
'-disk'. A capability flag QEMU_CAPS_USB_STORAGE_REMOVABLE was added
to keep track if this option is supported by the qemu version used.
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=922495
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Allow use of the usb-storage device only if the new capability flag
QEMU_CAPS_DEVICE_USB_STORAGE is set, which it is for qemu(-kvm)
versions >= 0.12.1.2-rhel62-beta.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
QEMU commit 3984890 introduced the "pci-hole64-size" property,
to i440FX-pcihost and q35-pcihost with a default setting of 2 GB.
Translate <pcihole64>x<pcihole64/> to:
-global q35-pcihost.pci-hole64-size=x for q35 machines and
-global i440FX-pcihost.pci-hole64-size=x for i440FX-based machines.
Error out on other machine types or if the size was specified
but the pcihost device lacks 'pci-hole64-size' property.
https://bugzilla.redhat.com/show_bug.cgi?id=990418
The ftp protocol is already recognized by qemu/KVM so add this support to
libvirt as well.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='ftp' name='/url/path'>
<host name='host.name' port='21'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
QEMU/KVM already allows a HTTP URL for the cdrom ISO image so add this support
to libvirt as well.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='http' name='/url/path'>
<host name='host.name' port='80'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=924153
Commit 904e05a2 (v0.9.9) added a per-<disk> seclabel element with
an attribute relabel='no' in order to try and minimize the
impact of shutdown delays when an NFS server disappears. The idea
was that if a disk is on NFS and can't be labeled in the first
place, there is no need to attempt the (no-op) relabel on domain
shutdown. Unfortunately, the way this was implemented was by
modifying the domain XML so that the optimization would survive
libvirtd restart, but in a way that is indistinguishable from an
explicit user setting. Furthermore, once the setting is turned
on, libvirt avoids attempts at labeling, even for operations like
snapshot or blockcopy where the chain is being extended or pivoted
onto non-NFS, where SELinux labeling is once again possible. As
a result, it was impossible to do a blockcopy to pivot from an
NFS image file onto a local file.
The solution is to separate the semantics of a chain that must
not be labeled (which the user can set even on persistent domains)
vs. the optimization of not attempting a relabel on cleanup (a
live-only annotation), and using only the user's explicit notation
rather than the optimization as the decision on whether to skip
a label attempt in the first place. When upgrading an older
libvirtd to a newer, an NFS volume will still attempt the relabel;
but as the avoidance of a relabel was only an optimization, this
shouldn't cause any problems.
In the ideal future, libvirt will eventually have XML describing
EVERY file in the backing chain, with each file having a separate
<seclabel> element. At that point, libvirt will be able to track
more closely which files need a relabel attempt at shutdown. But
until we reach that point, the single <seclabel> for the entire
<disk> chain is treated as a hint - when a chain has only one
file, then we know it is accurate; but if the chain has more than
one file, we have to attempt relabel in spite of the attribute,
in case part of the chain is local and SELinux mattered for that
portion of the chain.
* src/conf/domain_conf.h (_virSecurityDeviceLabelDef): Add new
member.
* src/conf/domain_conf.c (virSecurityDeviceLabelDefParseXML):
Parse it, for live images only.
(virSecurityDeviceLabelDefFormat): Output it.
(virDomainDiskDefParseXML, virDomainChrSourceDefParseXML)
(virDomainDiskSourceDefFormat, virDomainChrDefFormat)
(virDomainDiskDefFormat): Pass flags on through.
* src/security/security_selinux.c
(virSecuritySELinuxRestoreSecurityImageLabelInt): Honor labelskip
when possible.
(virSecuritySELinuxSetSecurityFileLabel): Set labelskip, not
norelabel, if labeling fails.
(virSecuritySELinuxSetFileconHelper): Fix indentation.
* docs/formatdomain.html.in (seclabel): Document new xml.
* docs/schemas/domaincommon.rng (devSeclabel): Allow it in RNG.
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.xml:
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.args:
* tests/qemuxml2xmloutdata/qemuxml2xmlout-seclabel-*-labelskip.xml:
New test files.
* tests/qemuxml2argvtest.c (mymain): Run the new tests.
* tests/qemuxml2xmltest.c (mymain): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
q35 machines have an implicit ahci (sata) controller at 00:1F.2 which
has no "id" associated with it. For this reason, we can't refer to it
as "ahci0". Instead, we don't give an id on the commandline, which
qemu interprets as "use the first ahci controller". We then need to
specify the unit with "unit=%d" rather than adding it onto the bus
arg.
This patch adds in special handling for a few devices that need to be
treated differently for q35 domains:
usb - there is no implicit/default usb controller for the q35
machinetype. This is done because normally the default usb controller
is added to a domain by just adding "-usb" to the qemu commandline,
and it's assumed that this will add a single piix3 usb1 controller at
slot 1 function 2. That's not what happens when the machinetype is
q35, though. Instead, adding -usb to the commandline adds 3 usb
(version 2) controllers to the domain at slot 0x1D.{1,2,7}. Rather
than having
<controller type='usb' index='0'/>
translate into 3 separate devices on the PCI bus, it's cleaner to not
automatically add a default usb device; one can always be added
explicitly if desired. Or we may decide that on q35 machines, 3 usb
controllers will be automatically added when none is given. But for
this initial commit, at least we aren't locking ourselves into
something we later won't want.
video - qemu always initializes the primary video device immediately
after any integrated devices for the machinetype. Unless instructed
otherwise (by using "-device vga..." instead of "-vga" which libvirt
uses in many cases to work around deficiencies and bugs in various
qemu versions) qemu will always pick the first unused slot. In the
case of the "pc" machinetype and its derivatives, this is always slot
2, but on q35 machinetypes, the first free slot is slot 1 (since the
q35's integrated peripheral devices are placed in other slots,
e.g. slot 0x1f). In order to make the PCI address of the video device
predictable, that slot (1 or 2, depending on machinetype) is reserved
even when no video device has been specified.
sata - a q35 machine always has a sata controller implicitly added at
slot 0x1F, function 2. There is no way to avoid this controller, so we
always add it. Note that the xml2xml tests for the pcie-root and q35
cases were changed to use DO_TEST_DIFFERENT() so that we can check for
the sata controller being automatically added. This is especially
important because we can't check for it in the xml2argv output (it has
no effect on that output since it's an implicit device).
ide - q35 has no ide controllers.
isa and smbus controllers - these two are always present in a q35 (at
slot 0x1F functions 0 and 3) but we have no way of modelling them in
our config. We do need to reserve those functions so that the user
doesn't attempt to put anything else there though. (note that the "pc"
machine type also has an ISA controller, which we also ignore).
This PCI controller, named "dmi-to-pci-bridge" in the libvirt config,
and implemented with qemu's "i82801b11-bridge" device, connects to a
PCI Express slot (e.g. one of the slots provided by the pcie-root
controller, aka "pcie.0" on the qemu commandline), and provides 31
*non-hot-pluggable* PCI (*not* PCIe) slots, numbered 1-31.
Any time a machine is defined which has a pcie-root controller
(i.e. any q35-based machinetype), libvirt will automatically add a
dmi-to-pci-bridge controller if one doesn't exist, and also add a
pci-bridge controller. The reasoning here is that any useful domain
will have either an immediate (startup time) or eventual (subsequent
hot-plug) need for a standard PCI slot; since the pcie-root controller
only provides PCIe slots, we need to connect a dmi-to-pci-bridge
controller to it in order to get a non-hot-plug PCI slot that we can
then use to connect a pci-bridge - the slots provided by the
pci-bridge will be both standard PCI and hot-pluggable.
Since pci-bridge devices themselves can not be hot-plugged into a
running system (although you can hot-plug other devices into a
pci-bridge's slots), any new pci-bridge controller that is added can
(and will) be plugged into the dmi-to-pci-bridge as long as it has
empty slots available.
This patch is also changing the qemuxml2xml-pcie test from a "DO_TEST"
to a "DO_DIFFERENT_TEST". This is so that the "before" xml can omit
the automatically added dmi-to-pci-bridge and pci-bridge devices, and
the "after" xml can include it - this way we are testing if libvirt is
properly adding these devices.
This controller is implicit on q35 machinetypes. It provides 31 PCIe
(*not* PCI) slots as controller 0.
Currently there are no devices that can connect to pcie-root, and no
implicit pci controller on a q35 machine, so q35 is still
unusable. For a usable q35 system, we need to add a
"dmi-to-pci-bridge" pci controller, which can connect to pcie-root,
and provides standard pci slots that can be used to connect other
devices.
Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports
all share the same namespace, they are all defined as controllers of
type='pci' in libvirt (but with a differing model attribute). Each of
these controllers has a certain connection type upstream, allows
certain connection types downstream, and each can either allow a
single downstream connection at slot 0, or connections from slot 1 -
31.
Right now, we only support the pci-root and pci-bridge devices, both
of which only allow PCI devices to connect, and both which have usable
slots 1 - 31. In preparation for adding other types of controllers
that have different capabilities, this patch 1) adds info to the
qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets
those capabilities appropriately for pci-root and pci-bridge devices,
and 3) validates that the controller being connected to is the proper
type when allocating slots or validating that a user-selected slot is
appropriate for a device..
Having this infrastructure in place will make it much easier to add
support for the other PCI controller types.
While it would be possible to do all the necessary checking by just
storing the controller model in the qemyuDomainPCIAddressBus, it
greatly simplifies all the validation code to also keep a "flags",
"minSlot" and "maxSlot" for each - that way we can just check those
attributes rather than requiring a nearly identical switch statement
everywhere we need to validate compatibility.
You may notice many places where the flags are seemingly hard-coded to
QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI
This is currently the correct value for all PCI devices, and in the
future will be the default, with small bits of code added to change to
the flags for the few devices which are the exceptions to this rule.
Finally, there are a few places with "FIXME" comments. Note that these
aren't indicating places that are broken according to the currently
supported devices, they are places that will need fixing when support
for new PCI controller models is added.
To assure that there was no regression in the auto-allocation of PCI
addresses or auto-creation of integrated pci-root, ide, and usb
controllers, a new test case (pci-bridge-many-disks) has been added to
both the qemuxml2argv and qemuxml2xml tests. This new test defines a
domain with several dozen virtio disks but no pci-root or
pci-bridges. The .args file of the new test case was created using
libvirt sources from before this patch, and the test still passes
after this patch has been applied.
<hyperv>
<spinlocks state='off'/>
</hyperv>
results in:
error: XML error: missing HyperV spinlock retry count
Don't require retries when state is off and use virXPathUInt
instead of virXPathString to simplify parsing.
https://bugzilla.redhat.com/show_bug.cgi?id=784836#c19
Since 0d70656afd, it starts to access the sysfs files to build
the qemu command line (by virSCSIDeviceGetSgName, which is to find
out the scsi generic device name by adpater🚌target:unit), there
is no way to work around, qemu wants to see the scsi generic device
like "/dev/sg6" anyway.
And there might be other places which need to access sysfs files
when building qemu command line in future.
Instead of increasing the arguments of qemuBuildCommandLine, this
introduces a new callback for qemuBuildCommandLine, and thus tests
can register their own callbacks for sysfs test input files accessing.
* src/qemu/qemu_command.h: (New callback struct
qemuBuildCommandLineCallbacks;
extern buildCommandLineCallbacks)
* src/qemu/qemu_command.c: (wire up the callback struct)
* src/qemu/qemu_driver.c: (Use the new syntax of qemuBuildCommandLine)
* src/qemu/qemu_hotplug.c: Likewise
* src/qemu/qemu_process.c: Likewise
* tests/testutilsqemu.[ch]: (Helper testSCSIDeviceGetSgName;
callback struct testCallbacks;)
* tests/qemuxml2argvtest.c: (Use testCallbacks)
* src/tests/qemuxmlnstest.c: (Like above)
If the <sysinfo> system table 'uuid' field is improperly formatted,
then qemu will fail to start the guest with the error:
virsh start dom
error: Failed to start domain dom
error: internal error process exited while connecting to monitor: Invalid SMBIOS UUID string
This was because the parsing rules were lax with respect to allowing extraneous
spaces and dashes in the provided UUID. As long as there were 32 hexavalues
that matched the UUID for the domain the string was accepted. However startup
failed because the string format wasn't correct. This patch will adjust the
string format so that when it's presented to the driver it's in the expected
format.
Added a test for uuid comparison within sysinfo.
QEMU introduced "discard" option for drive since commit a9384aff53,
<...>
@var{discard} is one of "ignore" (or "off") or "unmap" (or "on") and
controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
requests are ignored or passed to the filesystem. Some machine types
may not support discard requests.
</...>
This patch exposes the support in libvirt.
QEMU supported "discard" for "-drive" since v1.5.0-rc0:
% git tag --contains a9384aff53
contains
v1.5.0-rc0
v1.5.0-rc1
So this only detects the capability bit using virQEMUCapsProbeQMPCommandLine.
Adding a VNC WebSocket support for QEMU driver. This functionality is
in upstream qemu from commit described as v1.3.0-982-g7536ee4, so the
capability is being recognized based on QEMU version for now.
QEMU introduced command line "-mem-merge=on|off" (defaults to on) to
enable/disable the memory merge (KSM) at guest startup. This exposes
it by new XML:
<memoryBacking>
<nosharepages/>
</memoryBacking>
The XML tag is same with what we used internally for old RHEL.
Files ending in -invalid.xml are expected to violate the
XML schema check. The RBD file does not so must have a
different filename.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The QEMU command line syntax for RBD disks is
file=rbd:pool/image:opt1=val1:opt2=val2...
There is no way to escape the ':' if it appears in the
pool or image name. Thus it must be explicitly forbidden
if it occurs in the libvirt XML. People are known to
be abusing the lack of escaping in current libvirt to
pass arbitrary args to QEMU.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Except the scsi host device's controller is "lsilogic", mapping
between the libvirt attributes and scsi-generic properties is:
libvirt qemu
-----------------------------------------
controller bus ($libvirt_controller.0)
bus channel
target scsi-id
unit lun
For scsi host device with "lsilogic" controller, the mapping is:
('target (libvirt)' must be 0, as it's not used; 'unit (libvirt)
must <= 7).
libvirt qemu
----------------------------------------------------------
controller && bus bus ($libvirt_controller.$libvirt_bus)
unit scsi-id
It's not good to hardcode/hard-check limits of these attributes,
and even worse, these limits are not documented, one has to find
out by either testing or reading the qemu code, I'm looking forward
to qemu expose limits like these one day). For example, exposing
"max_target", "max_lun" for megasas:
static const struct SCSIBusInfo megasas_scsi_info = {
.tcq = true,
.max_target = MFI_MAX_LD,
.max_lun = 255,
.transfer_data = megasas_xfer_complete,
.get_sg_list = megasas_get_sg_list,
.complete = megasas_command_complete,
.cancel = megasas_command_cancel,
};
Example of the qemu command line (lsilogic controller):
-drive file=/dev/sg2,if=none,id=drive-hostdev-scsi_host7-0-0-0 \
-device scsi-generic,bus=scsi0.0,scsi-id=8,\
drive=drive-hostdev-scsi_host7-0-0-0,id=hostdev-scsi_host7-0-0-0
Example of the qemu command line (virtio-scsi controller):
-drive file=/dev/sg2,if=none,id=drive-hostdev-scsi_host7-0-0-0 \
-device scsi-generic,bus=scsi0.0,channel=0,scsi-id=128,lun=128,\
drive=drive-hostdev-scsi_host7-0-0-0,id=hostdev-scsi_host7-0-0-0
Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
Signed-off-by: Osier Yang <jyang@redhat.com>
Print an error instead of crashing when a TPM device without
a backend is specified.
Add a test for tpm device with no backend, which should fail
with a parse error.
https://bugzilla.redhat.com/show_bug.cgi?id=961252
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
In the past we automatically added a USB controller and assigned
it a PCI address (0:0:1.2) even on machines without a PCI bus.
This didn't break machines with no PCI bus because the command
line for it is just '-usb', with no mention of the PCI bus.
The implicit IDE controller (reserved address 0:0:1.1) has
no command line at all.
Commit b33eb0dc removed the ability to reserve PCI addresses
on machines without a PCI bus. This made them stop working,
since there would always be the implicit USB controller.
Skip the reservation of addresses for these controllers when
there is no PCI bus, instead of failing.
The device option for vfio-pci is nearly identical to that for
pci-assign - only the configfd parameter isn't supported (or needed).
Checking for presence of the bootindex parameter is done separately
from constructing the commandline, similar to how it is done for
pci-assign.
This patch contains tests to check for proper commandline
construction. It also includes tests for parser-formatter-parser
roundtrips (xml2xml), because those tests use the same data files, and
would have failed had they been included before now.
qemu: xml/args tests for VFIO hostdev and <interface type='hostdev'/>
These should be squashed in with the patch that adds commandline
handling of vfio (they would fail at any earlier time).
When all usb controllers connected to the same bus have <master
startport='x'/> specified, none of them have 'id=usb' assigned and
thus qemu fails due to invalid masterport specification (we use 'usb'
for that purpose). Adding a check that at least one of the
controllers is specified without <master startport='x'/> and in case
this happens, error out due to invalid configuration.
Add a "dry run" address allocation to figure out how many bridges
will be needed for all the devices without explicit addresses.
Auto-add just enough bridges to put all the devices on, or up to the
bridge with the largest specified index.
It will simplify later work if the sub-drivers have dedicated
APIs / field names. ie virNetworkDriver should have
virDrvNetworkOpen and virDrvNetworkClose methods
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure that the driver struct field names match the public
API names. For an API virXXXX we must have a driver struct
field xXXXX. ie strip the leading 'vir' and lowercase any
leading uppercase letters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently, -device xxx still doesn't work well for ppc64 platform.
It's better use legacy USB option with default for ppc64.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To avoid the collision for creating USB controllers in machine->init()
and -device xx command line, it needs to set usb=off to avoid one USB
controller created in machine->init(). So that libvirt can use -device
or -usb to create USB controller sucessfully.
So QEMU_CAPS_MACHINE_USB_OPT capability is added, and it is for QEMU
v1.3.0 onwards which supports USB option.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
This introduce a new attribute "num_queues" (same with the good name
QEMU uses) for virtio-scsi controller. An example of the XML:
<controller type='scsi' index='0' model='virtio-scsi' num_queues='8'/>
The corresponding QEMU command line:
-device virtio-scsi-pci,id=scsi0,num_queues=8,bus=pci.0,addr=0x3 \
This patch removes the defaultDiskDriverName from the virCaps
structure. This particular default value is used only in the qemu driver
so this patch uses the recently added callback to fill the driver name
if it's needed instead of propagating it through virCaps.
This patch is the result of running:
for i in $(git ls-files | grep -v html | grep -v \.po$ ); do
sed -i -e "s/virDomainXMLConf/virDomainXMLOption/g" -e "s/xmlconf/xmlopt/g" $i
done
and a few manual tweaks.
Currently, -machine option is used only when dump-guest-core is set.
To use options defined in machine option for newer version of QEMU,
it needs to use -machine xxx, and to be compatible with older version
-M, this patch adds QEMU_CAPS_MACHINE_OPT capability for newer
version which supports -machine option.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This does nothing more than adding the new device and capability.
The device is present since QEMU 1.2.0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A better way to do this would be to use a configuration file like
[iscsi "target-name"]
user = name
password = pwd
and pass it via -readconfig. This would remove the username and password
from the "ps" output. For now, however, keep this solution.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
libiscsi provides a userspace iSCSI initiator.
The main advantage over the kernel initiator is that it is very
easy to provide different initiator names for VMs on the same host.
Thus libiscsi supports usage of persistent reservations in the VM,
which otherwise would only be possible with NPIV.
libiscsi uses "iscsi" as the scheme, not "iscsi+tcp". We can change
this in the tests (while remaining backwards-compatible manner, because
QEMU uses TCP as the default transport for both Gluster and NBD).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The "dtb" option sets the filename for the device tree.
If without this option support, "-dtb file" will be converted into
<qemu:commandline> in domain XML file.
For example, '-dtb /media/ram/test.dtb' will be converted into
<qemu:commandline>
<qemu:arg value='-dtb'/>
<qemu:arg value='/media/ram/test.dtb'/>
</qemu:commandline>
This is not very friendly.
This patchset add special <dtb> tag like <kernel> and <initrd>
which is easier for user to write domain XML file.
<os>
<type arch='ppc' machine='ppce500v2'>hvm</type>
<kernel>/media/ram/uImage</kernel>
<initrd>/media/ram/ramdisk</initrd>
<dtb>/media/ram/test.dtb</dtb>
<cmdline>root=/dev/ram rw console=ttyS0,115200</cmdline>
</os>
Signed-off-by: Eric Blake <eblake@redhat.com>
QEMU 1.3 and newer support an alternative URI-based syntax to specify
the location of an NBD server. Libvirt can keep on using the old
syntax in general, but only the URI syntax supports IPv6 addresses.
The URI syntax also supports relative paths to Unix sockets. These
should never be used but aren't explicitly blocked either by the parser,
so support it just in case.
The URI syntax is intentionally compatible with Gluster's, and the
code can be reused.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This reuses the XML format that was introduced for Gluster.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
These are supported by nbd-server and by the NBD server that QEMU
embeds for live image access.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Adding test cases for virtio-scsi and virtio-rng. Since ccw is covering
the superset of the s390 bus handling, these are deemed to be sufficient.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
QEMU_CAPS_VIRTIO_SCSI_PCI implies that virtio-scsi is only supported
for the PCI bus, which is not the case. Remove the _PCI suffix.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
The virCaps structure gathered a ton of irrelevant data over time that.
The original reason is that it was propagated to the XML parser
functions.
This patch aims to create a new data structure virDomainXMLConf that
will contain immutable data that are used by the XML parser. This will
allow two things we need:
1) Get rid of the stuff from virCaps
2) Allow us to add callbacks to check and add driver specific stuff
after domain XML is parsed.
This first attempt removes pointers to private data allocation functions
to this new structure and update all callers and function that require
them.
Code that validates the whitelist for the RNG device filename
didn't account for fact that filename may be NULL. This led
to a NULL reference crash. This wasn't caught since the test
suite was not covering this XML syntax
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To avoid confusion between 'virCapsPtr' and 'qemuCapsPtr'
do some renaming of various fucntions/variables. All
instances of 'qemuCapsPtr' are renamed to 'qemuCaps'. To
avoid that clashing with the 'qemuCaps' typedef though,
rename the latter to virQEMUCaps.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To enable virCapabilities instances to be reference counted,
turn it into a virObject. All cases of virCapabilitiesFree
turn into virObjectUnref
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The data files for testing QEMU command line generation are
hardcoded to use /etc/pki, so we should explicitly set that
in the test case, avoiding the dynamic SYSCONFDIR value.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Valgrind deterimined that fakeSecretGetValue() was using the secret
value without checking validity. Returning NULL causes the caller
to emit a message and results in failure.
Additionally commit 'b090aa7d' changes leaked vncSASLdir and vncTLSx509certdir
Currently the virQEMUDriverPtr struct contains an wide variety
of data with varying access needs. Move all the static config
data into a dedicated virQEMUDriverConfigPtr object. The only
locking requirement is to hold the driver lock, while obtaining
an instance of virQEMUDriverConfigPtr. Once a reference is held
on the config object, it can be used completely lockless since
it is immutable.
NB, not all APIs correctly hold the driver lock while getting
a reference to the config object in this patch. This is safe
for now since the config is never updated on the fly. Later
patches will address this fully.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Hosts for rbd are ceph monitor daemons. These have fixed IP addresses,
so they are often referenced by IP rather than hostname for
convenience, or to avoid relying on DNS. Using IPv4 addresses as the
host name works already, but IPv6 addresses require rbd-specific
escaping because the colon is used as an option separator in the
string passed to qemu.
Escape these colons, and enclose the IPv6 address in square brackets
so it is distinguished from the port, which is currently mandatory.
Acked-by: Osier Yang <jyang@redhat.com>
Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
Coverity determined that 'emulator' could no longer be set and determined the
code was dead. Looking through the history, I discovered commit-id ed769e18
removed code originally added by commit-id 9237e955 and further modified by
commit-id 6a7e7c4f.
This is the QEMU backend code for the SCLP console support.
It includes SCLP capability detection, QEMU command line generation
and a test case.
Signed-off-by: J.B. Joret <jb@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
'-device VGA' maps to '-vga std'
'-device cirrus-vga' maps to '-vga cirrus'
'-device qxl-vga' maps to '-vga qxl'
(there is also '-device qxl' for secondary devices)
'-device vmware-svga' maps to '-vga vmware'
For qemu(>=1.2), we can use -device to replace -vga for video
device. For the primary video device, the patch tries to use 0x2
slot for matching old qemu. If the 0x2 slot is allocated already,
the addr property could help for using any available slot.
For qemu(< 1.2), we keep using -vga for primary device.
QEMU supports setting vendor and product strings for disk since
1.2.0 (only scsi-disk, scsi-hd, scsi-cd support it), this patch
exposes it with new XML elements <vendor> and <product> of disk
device.
Remove the obsolete 'qemud' naming prefix and underscore
based type name. Introduce virQEMUDriverPtr as the replacement,
in common with LXC driver naming style
Currently it's assumed that qemu always supports VNC, however it is
definitely possible to compile qemu without VNC support so we should at
the very least check for it and handle that correctly.
When both kvmclock and kvm_pv_eoi are configured (either disabled or
enabled) libvirt will generate invalid CPU specification due to the
fact that even though kvmclock causes the CPU to be specified, it
doesn't set have_cpu flag to true (and the new kvm_pv_eoi as well).
This patch fixes the issue and adds a test exactly for that to show
that it is fixed correctly (and also to keep it that way in the future
of course).
When launching a QEMU guest the binary is probed to discover
the list of supported CPU names. Remove this probing with a
simple lookup of CPU models in the qemuCapsPtr object. This
avoids another invocation of the QEMU binary during the
startup path.
As a nice benefit we can now remove all the nasty hacks from
the test suite which were done to avoid having to exec QEMU
on the test system. The building of the -cpu command line
can just rely on data we pre-populate in qemuCapsPtr.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When XML for a new guest is received, the machine type is
immediately canonicalized into the version specific name.
This involves probing QEMU for supported machine types.
Replace this probing with a lookup of the machine types
in the (hopefully cached) qemuCapsPtr object
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Remove all use of the existing APIs for querying QEMU
capability flags. Instead obtain a qemuCapsPtr object
from the global cache. This avoids the execution of
'qemu -help' (and related commands) when launching new
guests.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
All of ide-drive, ide-hd, ide-cd, scsi-disk, scsi-hd, and scsi-cd
supports wwn property. (NB, scsi-block doesn't support to set wwn).
* src/qemu/qemu_command.c: Error out if underlying QEMU doesn't
support wwn property for the device; Set wwn for the device otherwise.
* tests/qemuxml2argvdata/qemuxml2argv-disk-ide-wwn.args: New test
* tests/qemuxml2argvdata/qemuxml2argv-disk-ide-wwn.xml: Likewise
* tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-wwn.args: Likewise
* tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-wwn.xml: Likewise
* tests/qemuxml2argvtest.c: Add the new tests.
This patch adds full support for EOI setting for domains. Because this
is CPU feature (flag), the model needs to be added even when it's not
specified. Fortunately this problem was already solved with kvmclock,
so this patch simply abuses that.
And due to the size of the patch (17 lines) I dared to include the tests.
The current qemu capabilities are stored in a virBitmapPtr
object, whose type is exposed to callers. We want to store
more data besides just the flags, so we need to move to a
struct type. This object will also need to be reference
counted, since we'll be maintaining a cache of data per
binary. This change introduces a 'qemuCapsPtr' virObject
class. Most of the change is just renaming types and
variables in all the callers
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
After discussion with DB we decided to rename the new iolimit
element as it creates the impression it would be there to
limit (i.e. throttle) I/O instead of specifying immutable
characteristics of a block device.
This is also backed by the fact that the term I/O Limits has
vanished from newer storage admin documentation.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Implementation of iolimits for the qemu driver with
capability probing for block size attribute and
command line generation for block sizes.
Including testcase for qemuxml2argvtest.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Qemu command line generation for geometry override and testcases.
Signed-off-by: J.B. Joret <jb@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Rename qemuDefaultScsiControllerModel to qemuCheckScsiControllerModel.
When scsi model is given explicitly in XML(model > 0) checking if the
underlying QEMU supports it or not first, raise an error on checking
failure.
When the model is not given(mode <= 0), return LSI by default, if
the QEMU doesn't support it, raise an error.
This converts the following public API datatypes to use the
virObject infrastructure:
virConnectPtr
virDomainPtr
virDomainSnapshotPtr
virInterfacePtr
virNetworkPtr
virNodeDevicePtr
virNWFilterPtr
virSecretPtr
virStreamPtr
virStorageVolPtr
virStoragePoolPtr
The code is significantly simplified, since the mutex in the
virConnectPtr object now only needs to be held when accessing
the per-connection virError object instance. All other operations
are completely lock free.
* src/datatypes.c, src/datatypes.h, src/libvirt.c: Convert
public datatypes to use virObject
* src/conf/domain_event.c, src/phyp/phyp_driver.c,
src/qemu/qemu_command.c, src/qemu/qemu_migration.c,
src/qemu/qemu_process.c, src/storage/storage_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xend_internal.c,
tests/qemuxml2argvtest.c, tests/qemuxmlnstest.c,
tests/sexpr2xmltest.c, tests/xmconfigtest.c: Convert
to use virObjectUnref/virObjectRef
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch enables the "none" USB controller for qemu guests and adds
valdiation on hot-plugged devices if the guest has USB disabled.
This patch also adds a set of tests to check parsing of domain XMLs that
use the "none" controller and some forbidden situations concerning it.
This patch enhances qemuxml2argvtest to deal with semantically incorrect
domain XMLs, that generate errors while parsing.
This patch cleans up macros that invoke the tests and changes boolean
flags to a bit array flag variable.
Add minimal s390-virtio domain testcase and testcases for virtio serial,
net, disk for the virtio-s390 bus.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Rewrote the device assignment parts in tests to use qemuDomainAssignAddresses.
This way the tests will work for new device address types as they show
up in the future (like s390 device types).
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
I came across a bug that the command line generated for passthrough
of the host parallel port /dev/parport0 by libvirt for QEMU is incorrect.
It currently produces:
-chardev tty,id=charparallel0,path=/dev/parport0
-device isa-parallel,chardev=charparallel0,id=parallel0
The first parameter is "tty". It sould be "parport".
If I launch qemu with -chardev parport,... it works as expected.
I have already filled a bug report (
https://bugzilla.redhat.com/show_bug.cgi?id=823879 ), the topic was
already on the list some months ago:
https://www.redhat.com/archives/libvirt-users/2011-September/msg00095.html
Signed-off-by: Eric Blake <eblake@redhat.com>
Though numad will manage the memory allocation of task dynamically,
it wants management application (libvirt) to pre-set the memory
policy according to the advisory nodeset returned from querying numad,
(just like pre-bind CPU nodeset for domain process), and thus the
performance could benefit much more from it.
This patch introduces new XML tag 'placement', value 'auto' indicates
whether to set the memory policy with the advisory nodeset from numad,
and its value defaults to the value of <vcpu> placement, or 'static'
if 'nodeset' is specified. Example of the new XML tag's usage:
<numatune>
<memory placement='auto' mode='interleave'/>
</numatune>
Just like what current "numatune" does, the 'auto' numa memory policy
setting uses libnuma's API too.
If <vcpu> "placement" is "auto", and <numatune> is not specified
explicitly, a default <numatume> will be added with "placement"
set as "auto", and "mode" set as "strict".
The following XML can now fully drive numad:
1) <vcpu> placement is 'auto', no <numatune> is specified.
<vcpu placement='auto'>10</vcpu>
2) <vcpu> placement is 'auto', no 'placement' is specified for
<numatune>.
<vcpu placement='auto'>10</vcpu>
<numatune>
<memory mode='interleave'/>
</numatune>
And it's also able to control the CPU placement and memory policy
independently. e.g.
1) <vcpu> placement is 'auto', and <numatune> placement is 'static'
<vcpu placement='auto'>10</vcpu>
<numatune>
<memory mode='strict' nodeset='0-10,^7'/>
</numatune>
2) <vcpu> placement is 'static', and <numatune> placement is 'auto'
<vcpu placement='static' cpuset='0-24,^12'>10</vcpu>
<numatune>
<memory mode='interleave' placement='auto'/>
</numatume>
A follow up patch will change the XML formatting codes to always output
'placement' for <vcpu>, even it's 'static'.
Error: RESOURCE_LEAK:
/libvirt/tests/qemuxml2argvtest.c:47:
alloc_arg: Calling allocation function "virAlloc" on "ret".
/libvirt/src/util/memory.c:101:
alloc_fn: Storage is returned from allocation function "calloc".
/libvirt/src/util/memory.c:101:
var_assign: Assigning: "*((void **)ptrptr)" = "calloc(1UL, size)".
/libvirt/tests/qemuxml2argvtest.c:54:
leaked_storage: Variable "ret" going out of scope leaks the storage it points to.
A "ide-drive" device can be either a hard disk or a CD-ROM,
if there is ",media=cdrom" specified for the backend, it's
a CD-ROM, otherwise it's a hard disk.
Upstream qemu splitted "ide-drive" into "ide-hd" and "ide-cd"
since commit 1f56e32, and ",media=cdrom" is not required for
ide-cd anymore. "ide-drive" is still supported for backwards
compatibility, but no doubt we should go foward.
A "scsi-disk" device can be either a hard disk or a CD-ROM,
if there is ",media=cdrom" specified for the backend, it's
a CD-ROM, otherwise it's a hard disk.
But upstream qemu splitted "scsi-disk" into "scsi-hd" and
"scsi-cd" since commit b443ae, and ",media=cdrom" is not
required for scsi-cd anymore. "scsi-disk" is still supported
for backwards compatibility, but no doubt we should go
foward.
When building on Fedora 17 (which uses gcc 4.7.0) with -O0 in CFLAGS,
three of the tests failed to compile.
cputest.c and qemuxml2argvtest.c had non-static structs defined
inside the macro that was being repeatedly invoked. Due to some so-far
unidentified change in gcc, the stack space used by variables defined
inside { } is not recovered/re-used when the block ends, so all these
structs have become additive (this is the same problem worked around
in commit cf57d345b). Fortunately, these two files could be fixed with
a single line addition of "static" to the struct definition in the
macro.
virnettlscontexttest.c was a bit different, though. The problem structs
in the do/while loop of macros had non-constant initializers, so it
took a bit more work and piecemeal initialization instead of member
initialization to get things to be happy.
In an ideal world, none of these changes should be necessary, but not
knowing how long it will be until the gcc regressions are fixed, and
since the code is just as correct after this patch as before, it makes
sense to fix libvirt's build for -O0 while also reporting the gcc
problem.
Return statements with parameter enclosed in parentheses were modified
and parentheses were removed. The whole change was scripted, here is how:
List of files was obtained using this command:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$'
Found files were modified with this command:
sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
Then checked for nonsense.
The whole command looks like this:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$' | xargs sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
This is similiar with physical world, one will be surprised if the
box starts with medium exists while the tray is open.
New tests are added, tests disk-{cdrom,floppy}-tray are for the qemu
supports "-device" flag, and disk-{cdrom,floppy}-no-device-cap are
for old qemu, i.e. which doesn't support "-device" flag.
One of the recent commits introduced support for
spice agent-mouse. However, test for this feature
require some tweaking: pass QEMU_CAPS_CHARDEV_SPICEVMC |
QEMU_CAPS_NODEFCONFIG and add "-vga cirrus".
This patch makes sure that each network device ("interface") of
type='hostdev' appears on both the hostdevs list and the nets list of
the virDomainDef, and it modifies the qemu driver startup code so that
these devices will be presented to qemu on the commandline as hostdevs
rather than as network devices.
It does not add support for hotplug of these type of devices, or code
to honor the <mac address> or <virtualport> given in the config (both
of those will be done in separate patches).
Once each device is placed on both lists, much of what this patch does
is modify places in the code that traverse all the device lists so
that these hybrid devices are only acted on once - either along with
the other hostdevs, or along with the other network interfaces. (In
many cases, only one of the lists is traversed / a specific operation
is performed on only one type of device. In those instances, the code
can remain unchanged.)
There is one special case - when building the commandline, interfaces
are allowed to proceed all the way through
networkAllocateActualDevice() before deciding to skip the rest of
netdev-specific processing - this is so that (once we have support for
networks with pools of hostdev devices) we can get the actual device
allocated, then rely on the loop processing all hostdevs to generate
the correct commandline.
(NB: <interface type='hostdev'> is only supported for PCI network
devices that are SR-IOV Virtual Functions (VF). Standard PCI[e] and
USB devices, and even the Physical Functions (PF) of SR-IOV devices
can only be assigned to a guest using the more basic <hostdev> device
entry. This limitation is mostly due to the fact that non-SR-IOV
ethernet devices tend to lose mac address configuration whenever the
card is reset, which happens when a card is assigned to a guest;
SR-IOV VFs fortunately don't suffer the same problem.)
Commit b170eb99 introduced a bug: domains that had an explicit
<seclabel type='none'/> when started would not be reparsed if
libvirtd restarted. It turns out that our testsuite was not
exercising this because it never tried anything but inactive
parsing. Additionally, the live XML for such a domain failed
to re-validate. Applying just the tests/ portion of this patch
will expose the bugs that are fixed by the other two files.
* docs/schemas/domaincommon.rng (seclabel): Allow relabel under
type='none'.
* src/conf/domain_conf.c (virSecurityLabelDefParseXML): Per RNG,
presence of <seclabel> with no type implies dynamic. Don't
require sub-elements for type='none'.
* tests/qemuxml2xmltest.c (mymain): Add test.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-none.xml: Add file.
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-none.args: Add file.
Reported by Ansis Atteka.
When support for the rombar option was added, it was only added for
PCI passthrough devices, configured with <hostdev>. The same option is
available for any network device that is attached to the guest's PCI
bus. This patch allows setting rombar for any PCI network device type.
After adding cases to test this to qemuxml2argv-hostdev-pci-rombar.*,
I decided to rename those files (to qemuxml2argv-pci-rom.*) to more
accurately reflect the additional tests, and also noticed that up to
now we've only been performing a domainschematest for that case, so I
added the "pci-rom" test to both qemuxml2argv and qemuxml2xml (and in
the process found some bugs whose fixes I squashed into previous
commits of this series).
QEMU supports a bunch of CPUID features that are tied to the kvm CPUID
nodes rather than the processor's. They are "kvmclock",
"kvm_nopiodelay", "kvm_mmu", "kvm_asyncpf". These are not known to
libvirt and their CPUID leaf might move if (for example) the Hyper-V
extensions are enabled. Hence their handling would anyway require some
special-casing.
However, among these the most useful is kvmclock; an additional
"property" of this feature is that a <timer> element is a better model
than a CPUID feature. Although, creating part of the -cpu command-line
from something other than the <cpu> XML element introduces some
ugliness.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There was missing capability for blkiotune and thus specifying these
settings caused libvirt to run qemu with invalid parameters and then
reporting qemu error instead of the standard libvirt one. The support
for blkiotune setting was added in upstream qemu repo under commit
0563e191516289c9d2f282a8c50f2eecef2fa773.
This introduces new attribute wrpolicy with only supported
value as immediate. This will be an optional
attribute with no defaults. This helps specify whether
to skip the host page cache.
When wrpolicy is specified, meaning when wrpolicy=immediate
a writeback is explicitly initiated for the dirty pages in
the host page cache as part of the guest file write operation.
Usage:
<filesystem type='mount' accessmode='passthrough'>
<driver type='path' wrpolicy='immediate'/>
<source dir='/export/to/guest'/>
<target dir='mount_tag'/>
</filesystem>
Currently this only works with type='mount' for the QEMU/KVM driver.
Signed-off-by: Deepak C Shetty <deepakcs@linux.vnet.ibm.com>
