Just like the more common split builds, these are of type
QEMU_FIRMWARE_DEVICE_FLASH; however, they have no associated
NVRAM template, so we can't access the corresponding structure
member unconditionally or we'll trigger a crash.
https://bugzilla.redhat.com/show_bug.cgi?id=2196178
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The documentation states that, just like the Modern() variant,
this function should return 1 if a match wasn't found. It
currently doesn't do that, and returns 0 instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In mu previous commits I've moved internals of
qemuDomainChrDefDropDefaultPath() into a separate function
(qemuDomainChrMatchDefaultPath()) but forgot to remove @buf and
@regexp variables which are now unused.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For historical reasons (i.e. unknown reason) we put channel
sockets into a path derived from cfg->libDir which is a path that
survives host reboots (e.g. /var/lib/libvirt/...). This is not
necessary and in fact for session daemon creates a longer prefix:
XDG_CONFIG_HOME -> /home/user/.config
XDG_RUNTIME_DIR -> /run/user/1000
Worse, if host is rebooted suddenly (e.g. due to power loss) then
we leave files behind and nobody will ever remove them.
Therefore, place the channel target dir into state dir.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2173980
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
A <channel/> device is basically an UNIX socket into guest.
Whatever is sent from the host, appears in the guest and vice
versa. But because of that, the length of the path to the socket
is important (underscored by fact that we derive the path from
domain short name). But there are still cases where we might not
fit into UNIX_PATH_MAX limit (usually 108 characters), because
the path is derived also from other variables, e.g.
XDG_CONFIG_HOME for session domains.
There are two components though, that are needless: "/target/"
and "domain-" prefix. Drop them. This is safe to do, because
running domains have their path saved in status XML and even
though paths are dropped on migration, they are not part of guest
ABI and thus we are free to change them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
If a user passes a list of disks to migrate but don't actually use
'VIR_MIGRATE_NON_SHARED_DISK' or 'VIR_MIGRATE_NON_SHARED_INC' flags the
parameter would be simply ignored without informing the user of the
error.
Add a proper error in such case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When VIR_MIGRATE_TUNNELLED is used without
VIR_MIGRATE_NON_SHARED_DISK/VIR_MIGRATE_NON_SHARED_INC
an error was reported without actually returning failure.
This was caused by a refactor which dropped many error paths.
Fixes: 6111b23522
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The '/dev' filesystem convenience directory for a LVM volume group is
not created when the volume group is empty.
The logic in 'virStorageBackendLogicalCheckPool' which is used to see
whether a pool is active was first checking presence of the directory,
which failed for an empty VG.
Since the second step is virStorageBackendLogicalMatchPoolSource which
is checking mapping between configured PVs and the VG, we can simply
rely on the function to also check presence of the pool.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2228223
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In case of invalid placement its value should
be passed as a parameter of virReportError
instead of mode.
Fixes: 93e82727ec ("numatune: Encapsulate numatune configuration in order to unify results")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When spawning a new container (via clone()) we allocate stack for
lxcContainerChild(). So far, we allocate 4 pages for the stack
and this used to be enough until we started rewriting everything
to glib. With glib we switched to g_strerror() which localizes
errno strings and thus increases stack usage, while the
previously used strerror_r() was more compact.
Fortunately, the solution is easy - just increase how much stack
the child can use (16 pages ought to be enough for anybody).
And while at it, lets use mmap() for allocation which offer some
nice features:
MAP_STACK - align allocation to be suitable for stack (even
though, currently ignored on Linux),
MAP_GROWSDOWN - kernel guards out of bounds access from child
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/511
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This fixes
commit 38abf9c34d
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Wed Jun 21 13:22:40 2023 +0100
src: set max open file limit to match systemd >= 240 defaults
The bug referenced in that commit had suggested to set
LimitNOFile=512000:1024
on the basis that matches current systemd default behaviour and is
compatible with old systemd. That was good except
* The setting is LimitNOFILE and these are case sensitive
* The hard and soft limits were inverted - soft must come
first and so it would have been ignored even if the
setting name was correct.
* The default hard limit is 524288 not 512000
Reported-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When a query for an interface via virInterfaceLookupByMACString finds
multiple interfaces an error is returned. Treat such error with the same
'debug' priority as we treat when the interface was not found to avoid
spamming logs with such configurations.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/514
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Since the error message originates from a log file it contains a
trailing newline. Strip it as all error handling adds it's own newline.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The caller passes in a 1k buffer, which when debug logging is in use is
easily filled with debug messages only. Thus after the first pass which
is common if the controller process already terminated the buffer will
not contain the real error, but rather a truncated debug message,
which will result in an error such as:
error: internal error: guest failed to start: 2023-08-01 12:58:31.948+0000: 798195: i
instead of the proper error:
error: internal error: guest failed to start: Failure in libvirt_lxc startup: Failed to create /home/rootfs/.oldroot: Permission denied
To fix the above retry the reading loop if the filtering function made
space in the buffer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Avoid logging multiline debug logs so that the function which attempts
to extract a non-debug log error message can work properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
If one of previous commits taught us something, it's that:
sizeof(variable) and sizeof(type) are not the same. Especially
because for live enough code the type might change (e.g. as we
use autoptr more). And since we don't get any warnings when an
incorrect length is passed to memset() it is easy to mess up. But
with sizeof(variable) instead, it's not as easy. Therefore,
switch to using memset(variable, 0, sizeof(*variable)), or its
alternatives, depending on level of pointers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
There are some cases left after previous commit which were not
picked up by coccinelle. Mostly, becuase the spatch was not
generic enough. We are left with cases like: two variables
declared on one line, a variable declared in #ifdef-s (there are
notoriously difficult for coccinelle), arrays, macro definitions,
etc.
Finish what coccinelle started, by hand.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
This is a more concise approach and guarantees there is
no time window where the struct is uninitialized.
Generated using the following semantic patch:
@@
type T;
identifier X;
@@
- T X;
+ T X = { 0 };
... when exists
(
- memset(&X, 0, sizeof(X));
|
- memset(&X, 0, sizeof(T));
)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Ideally, these would be fixed by coccinelle (see next commit),
but because of various reasons they aren't. Fix them manually.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Instead of suggesting to zero structs out using memset() we
should suggest initializing structs with zero initializer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
The fds variable inside of virNetlinkCommand() is not used
really. It's passed to memset() (hence compilers do not
complain), but that's about it. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
This is a residue of v6.8.0-rc1~100. The error variable inside of
virFirewallDApplyRule() is already initialized to NULL. There's
no need to memset() it to zero again.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Inside of remoteAuthSASL() the sargs variable is already
initialized to zero during declaration. There's no need to
memset() it again as it's unused in between it's declaration and
said memset().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
When a VSERPORT_CHANGE event is processed, we firstly do a little
detour and try to detect whether the event is coming from guest
agent. If so, we notify threads that are currently talking to the
agent about this fact. Then we proceed with usual event
processing (BeginJob(), update domain def, emit event, and so
on).
In both cases we use the same @dev variable to refer to domain
device. While this works, it will make writing semantic patch
unnecessary harder (see next commit(s)). Therefore, introduce a
separate variable for the detour code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
There are couple of variables that are declared at function
beginning but then used solely within a block (either for() loop
or if() statement). And just before their use they are zeroed
explicitly using memset(). Decrease their scope, use struct zero
initializer and drop explicit memset().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
This is similar to the previous commit, except this is for a
different type (vahControl) and also fixes the case where _ctl is
passed not initialized to vah_error() (via ctl pointer so that's
probably why compilers don't complain).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
When I implemented passt support in libvirt, I saw the --mac-addr
option on the passt commandline, immediately assumed that this was
used for setting the guest interface's mac address somewhere within
passt, and read no further. As a result, "--mac-addr" is always added
to the passt commandline, specifying the setting from <mac
addr='blah'/> in the guest's interface config.
But as pointed out in this bugzilla comment:
https://bugzilla.redhat.com/2184967#c8
That is *not at all* what passt's --mac-addr option does. Instead, it
is used to force the *remote* mac address for incoming traffic to a
specific value. So setting --mac-addr results in all traffic on the
interface having the same (the guest's) mac address for both source
and destination in all traffic. Surprisingly, this still works, so
nobody noticed it during testing.
The proper thing is to not specify any mac address to passt - the
remote MAC addresses can and should remain untouched, and the local
MAC address will end up being known to passt just by the guest sending
out packets with that MAC address.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
This reverts commit 8511b96a31.
Turns out, we need to do a bit more than just plain
qemuSecurityDomainSetPathLabel() which sets svirt_image_t. Passt
has its own SELinux policy and as a part of that they invent
passt_log_t for log files. Right now, I don't know how libvirt
could query that and even if I did, passt SELinux policy would
need to permit relabelling from svirt_t to passt_log_t, which it
doesn't [1].
Until these problems are addressed we shouldn't be pre-creating
the file as it puts users into way worse position - even
scenarios that used to work don't work. But then again - using
log file for passt is usually valuable for developers only and
not regular users.
1: https://bugzilla.redhat.com/show_bug.cgi?id=2209191#c10
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This reverts commit 83686f1eea.
This is needed only so that the next revert is clean.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We dropped our private virXXXPtr typedefs in v7.3.0-rc1~229 but
somehow v7.9.0-rc1~292 introduced one back:
virDomainEventMemoryDeviceSizeChangePtr. There's no need for it
and it's internal only. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
A new bug was introduced as a part of use-after-free fix below:
commit 411cbe7199
Author: Oleg Vasilev <oleg.vasilev@virtuozzo.com>
Date: Tue Jul 4 13:10:22 2023 +0600
remote: fix stream use-after-free
When the message was processed partially, it is actually supposed to
stay in the queue to be processed again. In such case, reinsert it back.
Signed-off-by: Oleg Vasilev <oleg.vasilev@virtuozzo.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The virRandomGenerateWWN() is used solely by nodedev driver to
autogenerate WWNN and WWNP when parsing a nodedev XML. Now, the
idea was (at least during monolithic daemon) that depending on
which hypervisor driver called the nodedev XML parsing (and
virRandomGenerateWWN() under the hood) the corresponding OUI is
used (e.g. "001a4a" for the QEMU driver).
But in era of split daemons things are not that easy. We do not
know which hypervisor driver called us. And there might be no
hypervisor driver at all - users are allowed to connect to
individual drivers directly (e.g. "nodedev:///system").
In this case, we can't use proper OUI. Well, do the next best
thing: pick one (QUMRANET_OUI).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When automatically adding a NUMA node (qemuDomainDefNumaAutoAdd()) the
memory size of the node is computed as:
total_memory - sum(memory devices)
And we have a nice helper for that: virDomainDefGetMemoryInitial() so
it looks logical to just call it. Except, this code runs in post parse
callback, i.e. memory sizes were not validated and it may happen that
the sum is greater than the total memory. This would be caught by
virDomainDefPostParseMemory() but that runs only after driver specific
callbacks (i.e. after qemuDomainDefNumaAutoAdd()) and because the
domain config was changed and memory was increased to this huge
number no error is caught.
So let's do what virDomainDefGetMemoryInitial() would do, but
with error checking.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2216236
Fixes: f5d4f5c8ee
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
This brings the tool's list of features in sync with qemu
commit 6f05a92ddc73ac8aa16cfd6188f907b30b0501e3.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Inside daemonStreamHandleWrite on stream completion (status=OK) we
reuse msg object to send confirmation.
Only after that, msg is poped from the queue and checked for continue.
By that time, msg might've already been processed for the confirmation
and freed.
Signed-off-by: Oleg Vasilev <oleg.vasilev@virtuozzo.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Helped to debug next patch use-after-free.
Signed-off-by: Oleg Vasilev <oleg.vasilev@virtuozzo.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If a per-domain SWTPM state directory exists but is empty our
code still considers it a valid state and skips running
'swtpm_setup' (handled in qemuTPMEmulatorRunSetup()).
While we should not try to inspect individual files created by
swtpm, we can still consider empty folder as non-existent state.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/320
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There might be cases where we want to know whether given
directory is empty or not. Introduce a helper for that:
virDirIsEmpty().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Queues is supported by virtio bus, including virtio-blk and
vhost-user-blk.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we don't use it for probing at all we can remove all the
corresponding monitor code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability code now probes the presence of commands from the QMP
schema instead of using 'query-commands'. Don't call the command and
adjust the '.replies' files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the probing code to extract the data from the QMP schema rather
than invoking 'query-commands'. This patch doesn't yet remove the actual
invocation of 'query-commands', just moves the actual probing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
nodeDeviceUpdateMediatedDevices invokes virMdevctlListDefined and
virMdevctlListActive both of which were passed the same 'errmsg' buffer.
Since virCommandSetErrorBuffer() always allocates the error buffer one
of them was leaked.
Fix it by populating the 'errmsg' buffer only on failure of
virMdevctlListActive|Defined which invoke the command.
Add a comment to nodeDeviceGetMdevctlListCommand reminding how
virCommandSetErrorBuffer() works.
Fixes: 44a0f2f0c8
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
