Add virStringHasControlChars that checks if the string has
any control characters other than \t\r\n,
and virStringStripControlChars that removes them in-place.
In one of my previous commits (49ed6cff9) I've introduced a test
among with some files stored under virnetdevtestdata folder.
While this works perfectly within a git tree, the folder was not
getting into .tar.gz and therefore the dist-check would fail.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds checks for empty bitmaps right after the calls of
virBitmapParse. These only include spots where set API's are called and
where domain's XML is parsed.
Also, it partially reverts commit 983f5a which added a check for
invalid nodeset "0,^0" into virBitmapParse function. This change broke
the logic, as an empty bitmap should not cause an error.
https://bugzilla.redhat.com/show_bug.cgi?id=1210545
rfc3986 states that the separator in URI path is a single slash.
Multiple slashes may potentially lead to different resources and thus we
should not remove them.
This new internal API checks if given CGroup controller is
available. It is going to be needed later when we need to make a
decision whether pin domain memory onto NUMA nodes using cpuset
CGroup controller or using numa_set_membind().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit cd5dc30 added this test, but it fails if
LIBXL_HAVE_BUILDINFO_USBDEVICE_LIST is not defined:
6) Xen XM-2-XML Format fullvirt-multiusb
... libvirt: error : unsupported configuration: multiple USB
devices not supported
FAILED
Instead of always using controller 0 and incrementing port number,
respect the maximum port numbers of controllers and use all of them.
Ports for virtio consoles are quietly reserved, but not formatted
(neither in XML nor on QEMU command line).
Also rejects duplicate virtio-serial addresses.
https://bugzilla.redhat.com/show_bug.cgi?id=890606https://bugzilla.redhat.com/show_bug.cgi?id=1076708
Test changes:
* virtio-auto.args
Filling out the port when just the controller is specified.
switched from using
maxport + 1
to:
first free port on the controller
* virtio-autoassign.args
Filling out the address when no <address> is specified.
Started using all the controllers instead of 0, also discards
the bus value.
* xml -> xml output of virtio-auto
The port assignment is no longer done as a part of XML parsing,
so the unspecified values stay 0.
The 7c3c7f217e and f5c2d6 commits introduced a nodeinfo test.
In order to do that, some parts of sysfs had to be copied.
However, sysfs is full of symlinks, so during copying some
symlinks broke. Remove them, as on different systems they can
point to different files or be broken. At the same time, we don't
need all files added in those commits. For instance we don't care
about 'uevent' files, 'power' folders, and others.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the order of appearance:
* MAX_LISTEN - never used
added by 23ad665c (qemud) and addec57 (lock daemon)
* NEXT_FREE_CLASS_ID - never used, added by 07d1b6b
* virLockError - never used, added by eb8268a4
* OPENVZ_MAX_ARG, CMDBUF_LEN, CMDOP_LEN
unused since the removal of ADD_ARG_LIT in d8b31306
* QEMU_NB_PER_CPU_STAT_PARAM - unused since 897808e
* QEMU_CMD_PROMPT, QEMU_PASSWD_PROMPT - unused since 1dc10a7
* TEST_MODEL_WORDSIZE - unused since c25c18f7
* TEMPDIR - never used, added by 714bef5
* NSIG - workaround around old headers
added by commit 60ed1d2
unused since virExec was moved by commit 02e8691
* DO_TEST_PARSE - never used, added by 9afa006
* DIFF_MSEC, GETTIMEOFDAY - unused since eee6eb6
We need to mock virFileExists to return true for "/dev/kvm" because the
test should not depend on host system.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
On IRC, Hydrar pointed a problem where 'virsh edit' failed on
his domain created through an ISCSI pool managed by virt-manager,
all because the XML included a block device with colons in the
name.
* docs/schemas/basictypes.rng (absFilePath): Add colon as safe.
* tests/qemuxml2argvdata/qemuxml2argv-disk-iscsi.xml: New file.
* tests/qemuxml2argvdata/qemuxml2argv-disk-iscsi.args: Likewise.
* tests/qemuxml2argvtest.c (mymain): Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Starting a qemu VM with a memory module that has the base address
specified results in the following error:
error: internal error: early end of file from monitor: possible problem:
2015-03-26T03:45:52.338891Z qemu-kvm: -device pc-dimm,node=0,memdev=memdimm0,
id=dimm0,slot=0,base=4294967296: Property '.base' not found
The correct property name for the base address is 'addr'.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
QEMU 2.3 adds these new models to cover Haswell and Broadwell CPUs with
updated microcode. Luckily, they also reverted former the machine type
specific changes to existing models. And since these changes were never
released, we don't need to hack around them in libvirt.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Recently we've fixed a bug where the status XML could not be parsed as
the parser used absolute path XPath queries. This test enhancement tests
all XML files used in the qemu-xml-2-xml test as a part of a status XML
snippet to see whether they are parsed correctly. The status XML-2-XML is
currently tested in 223 cases with this patch.
The current auto-indentation buffer code applies indentation only on
complete strings. To allow adding a string containing newlines and
having it properly indented this patch adds virBufferAddStr.
To allow adding more tests, refactor the XML-2-XML test so that the
files are not reloaded always and clarify the control flow.
Result of this changes is that the active and inactive portions of the
XML are tested in separate steps rather than one test step.
Function virQEMUCapsInitGuestFromBinary detect kvm support by testing
whether /dev/kvm exists or whether we pass path to kvmbin. Provide the
path we are testing via kvmbin for testing purpose instead of detecting
presence of /dev/kvm to successfully run the tests on all hosts.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commit 2360fe5d updated formating of <domain> element but forgot to
update qemucaps2xmldata xml files. In addition the test code was broken
too. Update the xml files and return -1 if testCompareXMLToXML fails
together with indentation fix.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Add support to start qemu instance with 'pc-dimm' device. Thanks to the
refactors we are able to reuse the existing function to determine the
parameters.
This patch adds code that parses and formats configuration for memory
devices.
A simple configuration would be:
<memory model='dimm'>
<target>
<size unit='KiB'>524287</size>
<node>0</node>
</target>
</memory>
A complete configuration of a memory device:
<memory model='dimm'>
<source>
<pagesize unit='KiB'>4096</pagesize>
<nodemask>1-3</nodemask>
</source>
<target>
<size unit='KiB'>524287</size>
<node>1</node>
</target>
</memory>
This patch preemptively forbids use of the <memory> device in individual
drivers so the users are warned right away that the device is not
supported.
To enable memory hotplug the maximum memory size and slot count need to
be specified. As qemu supports now other units than mebibytes when
specifying memory, use the new interface in this case.
Add a XML element that will allow to specify maximum supportable memory
and the count of memory slots to use with memory hotplug.
To avoid possible confusion and misuse of the new element this patch
also explicitly forbids the use of the maxMemory setting in individual
drivers's post parse callbacks. This limitation will be lifted when the
support is implemented.
Lets not give a bad example and check for return values of
virNetwork* APIs called within the test. Even though it's
unlikely that any API will fail, it can happen. We're connected
to the test driver after all, and our API sequence is correct. So
test driver should fail only in case of bug or OOM.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Midonet is an opensource virtual networking that over lays the IP
network between hypervisors. Currently, such networks can be made
with the openvswitch virtualport type.
This patch, defines the schema and documentation that will serve
as basis for the follow up patches that will add support to libvirt
for using Midonet virtual ports for its interfaces. The schema
definition requires that the port profile expresses its interfaceid
as part of the port profile. For that reason, this is part of the
patch too.
Signed-off-by: Antoni Segura Puimedon <toni+libvirt@midokura.com>
By querying the qemu guest agent with the QMP command
"guest-network-get-interfaces" and converting the received JSON
output to structured objects.
Although "ifconfig" is deprecated, IP aliases created by "ifconfig"
are supported by this API. The legacy syntax of an IP alias is:
"<ifname>:<alias-name>". Since we want all aliases to be clubbed
under parent interface, simply stripping ":<alias-name>" suffices.
Note that IP aliases formed by "ip" aren't visible to "ifconfig",
and aliases created by "ip" do not have any specific name. But
we are lucky, as qemu guest agent detects aliases created by both.
src/qemu/qemu_agent.h:
* Define qemuAgentGetInterfaces
src/qemu/qemu_agent.c:
* Implement qemuAgentGetInterface
src/qemu/qemu_driver.c:
* New function qemuGetDHCPInterfaces
* New function qemuDomainInterfaceAddresses
src/remote_protocol-sructs:
* Define new structs
tests/qemuagenttest.c:
* Add new test: testQemuAgentGetInterfaces
Test cases for IP aliases, 0 or multiple ipv4/ipv6 address(es)
Signed-off-by: Nehal J Wani <nehaljw.kkd1@gmail.com>
All the devices we have format their address as its last sub-element, so
let's change memballoon to follow suit. Also adjust RNG to allow any
order of them so 'virsh edit' doesn't shout at us.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Now that the size of guest's memory can be inferred from the NUMA
configuration (if present) make it optional to specify <memory>
explicitly.
To make sure that memory is specified add a check that some form of
memory size was specified. One side effect of this change is that it is
no longer possible to specify 0KiB as memory size for the VM, but I
don't think it would be any useful to do so. (I can imagine embedded
systems without memory, just registers, but that's far from what libvirt
is usually doing).
Forbidding 0 memory for guests also fixes a few corner cases where 0 was
not interpreted correctly and caused failures. (Arguments for numad when
using automatic placement, size of the balloon). This fixes problems
described in https://bugzilla.redhat.com/show_bug.cgi?id=1161461
Test case changes are added to verify that the schema change and code
behave correctly.
Use the NUMA total instead of the configured size both in XML and for
uses in the code once NUMA is enabled for a domain.
One test case change is necessary as the rounding of the individual cell
sizes was not matching the rounding of the total size.
In Xen>=4.3, libxl supports new syntax for USB devices:
usbdevice=[ "DEVICE", "DEVICE", ... ]
Add support for that in xenconfig driver. When only one device is
defined, keep using old syntax for backward compatibility.
Adjust tests for changed options order.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
So far it's just a structure which happens to have 'Obj' in its
name, but otherwise it not related to virObject at all. No
reference counting, not virObjectLock(), nothing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Use the new single function instead of calling
qemuMonitorJSONGetBlockStatsInfo and
qemuMonitorJSONGetBlockStatsParamsNumber. This will allow to delete the
functions later while still maintaining coverage.
Add a different version of parser for "info blockstats" that basically
parses the same information as the existing copy of the function.
This will allow us to remove the single device version
qemuMonitorGetBlockStatsInfo in the future.
The new implementation uses few new helpers so it should be more
understandable and provides a test case to verify that it works.
qemu HMP commands sent by libvirt are terminated just by a '\r'. The
fake monitor used in tests wasn't prepared to handle this and the
communication would hang on an attempt to do a HMP conversation.
Add a special case for handling commands separated by \r in case HMP is
used.
Our code supports that for ages. When using a <filterref/> to an
<interface/> several parameters can be passed to the filter. Later,
when building firewall rules, parameters are substituted for their
values. However, our RNG schema allowed only one parameter to be
passed.
Reported-by: Brian Rak <brak@gameservers.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 5aee81a0 introduced a new test for disk-serial. The test fails
on i686 arch because there is no need to add "-cpu qemu32" to command
line. To fix the test update emulator in XML to "/usr/bin/qemu" so we
don't add the "-cpu qemu32" to command while running the test on i686 or
x86_64 host.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We don't usually do tests purely for one change, but one change was
special because when users will migrate to OVMF/AAVMF, commit 18f9f69b
makes their lives easier by allowing them to interleave <type/> inside
<os/>. It would be nice of us to keep the possibility of them pasting
the loader and nvram elements wherever it is valid, hence this test.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit 3e4b783e fixed an issue with RNG schema where this address type
was missing, this commit adds a test for it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We have something like pvpanic device. However, in some cases it does
not have any address assigned, in which case we produce this ugly XML
(still valid though):
<devices>
<emulator>/usr/bin/qemu</emulator>
...
<panic>
</panic>
</devices>
Lets format "<panic/>" instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There was a mess in the way how we store unlimited value for memory
limits and how we handled values provided by user. Internally there
were two possible ways how to store unlimited value: as 0 value or as
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED. Because we chose to store memory
limits as unsigned long long, we cannot use -1 to represent unlimited.
It's much easier for us to say that everything greater than
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED means unlimited and leave 0 as valid
value despite that it makes no sense to set limit to 0.
Remove unnecessary function virCompareLimitUlong. The update of test
is to prevent the 0 to be miss-used as unlimited in future.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146539
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Since the APIs support just one element per namespace and while
modifying an element all duplicates would be removed, let's do this
right away in the post parse callback.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1190590
Adding functionality to libvirt that will allow it
query the ethtool interface for the availability
of certain NIC HW offload features
Here is an example of the feature XML definition:
<device>
<name>net_eth4_90_e2_ba_5e_a5_45</name>
<path>/sys/devices/pci0000:00/0000:00:03.0/0000:08:00.1/net/eth4</path>
<parent>pci_0000_08_00_1</parent>
<capability type='net'>
<interface>eth4</interface>
<address>90:e2:ba:5e:a5:45</address>
<link speed='10000' state='up'/>
<feature name='rx'/>
<feature name='tx'/>
<feature name='sg'/>
<feature name='tso'/>
<feature name='gso'/>
<feature name='gro'/>
<feature name='rxvlan'/>
<feature name='txvlan'/>
<feature name='rxhash'/>
<capability type='80203'/>
</capability>
</device>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
In commit edd1295e1d I've introduced an
XML element that allows to configure state of the network interface
link. Somehow the RNG schema hunk ended up in a weird place in the
network schema definition. Move it to the right place and add a test
case.
Note that the link state is set up via the monitor at VM startup so I
originally didn't think of adding a test case.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1173468
https://bugzilla.redhat.com/show_bug.cgi?id=1142631
This patch resolves a situation where the same "<target dev='$name'...>"
can be used for multiple disks in the domain.
While the $name is "mostly" advisory regarding the expected order that
the disk is added to the domain and not guaranteed to map to the device
name in the guest OS, it still should be unique enough such that other
domblk* type operations can be performed.
Without the patch, the domblklist will list the same Target twice:
$ virsh domblklist $dom
Target Source
------------------------------------------------
sda /var/lib/libvirt/images/file.qcow2
sda /var/lib/libvirt/images/file.img
Additionally, getting domblkstat, domblkerror, domblkinfo, and other block*
type calls will not be able to reference the second target.
Fortunately, hotplug disallows adding a "third" sda value:
$ qemu-img create -f raw /var/lib/libvirt/images/file2.img 10M
$ virsh attach-disk $dom /var/lib/libvirt/images/file2.img sda
error: Failed to attach disk
error: operation failed: target sda already exists
$
BUT, it since 'sdb' doesn't exist one would get the following on the same
hotplug attempt, but changing to use 'sdb' instead of 'sda'
$ virsh attach-disk $dom /var/lib/libvirt/images/file2.img sdb
error: Failed to attach disk
error: internal error: unable to execute QEMU command 'device_add': Duplicate ID 'scsi0-0-1' for device
$
Since we cannot fix this issue at parsing time, the best that can be done so
as to not "lose" a domain is to make the check prior to starting the guest
with the results as follows:
$ virsh start $dom
error: Failed to start domain $dom
error: XML error: target 'sda' duplicated for disk sources '/var/lib/libvirt/images/file.qcow2' and '/var/lib/libvirt/images/file.img'
$
Running 'make check' found a few more instances in the tests where this
duplicated target dev value was being used. These also exhibited some
duplicated 'id=' values (negating the uniqueness argument of aliases) in
the corresponding .args file and of course the *xmlout version of a few
input XML files.
In virStorageVolCreateXML, add VIR_VOL_XML_PARSE_NO_CAPACITY
to the call parsing the XML of the new volume to make the capacity
optional.
If the capacity is omitted, use the capacity of the old volume.
We already do that for values that are less than the original
volume capacity.
Commit f7afeddc added code to report to systemd an array of interface
indexes for all tap devices used by a guest. Unfortunately it not only
didn't add code to report the ifindexes for macvtap interfaces
(interface type='direct') or the tap devices used by type='ethernet',
it ended up sending "-1" as the ifindex for each macvtap or hostdev
interface. This resulted in a failure to start any domain that had a
macvtap or hostdev interface (or actually any type other than
"network" or "bridge").
This patch does the following with the nicindexes array:
1) Modify qemuBuildInterfaceCommandLine() to only fill in the
nicindexes array if given a non-NULL pointer to an array (and modifies
the test jig calls to the function to send NULL). This is because
there are tests in the test suite that have type='ethernet' and still
have an ifname specified, but that device of course doesn't actually
exist on the test system, so attempts to call virNetDevGetIndex() will
fail.
2) Even then, only add an entry to the nicindexes array for
appropriate types, and to do so for all appropriate types ("network",
"bridge", and "direct"), but only if the ifname is known (since that
is required to call virNetDevGetIndex().
Well, not that we are not formatting invalid XML, rather than not as
beautiful as we can:
<cpu mode='host-passthrough'>
</cpu>
If there are no children, let's use the singleton element.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This API joins the following two lines:
char *s = virBufferContentAndReset(buf1);
virBufferAdd(buf2, s, -1);
into one:
virBufferAddBuffer(buf2, buf1);
With one exception: there's no re-indentation applied to @buf1.
The idea is, that in general both can have different indentation
(like the test I'm adding proves)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since s390 does not support usb the default creation of a usb controller
for a domain should not occur.
Also adjust s390 test cases by removing usb device instances since
usb devices are no longer created by default for s390 the s390
test cases need to be adjusted.
Signed-off-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
For historical reasons data regarding NUMA configuration were split
between the CPU definition and numatune. We cannot do anything about the
XML still being split, but we certainly can at least store the relevant
data in one place.
This patch moves the NUMA stuff to the right place.
It's easier to recalculate the number in the one place it's used as
having a separate variable to track it. It will also help with moving
the NUMA code to the separate module.
The mask was stored both as a bitmap and as a string. The string is used
for XML output only. Remove the string, as it can be reconstructed from
the bitmap.
The test change is necessary as the bitmap formatter doesn't "optimize"
using the '^' operator.
Rewrite the function to save a few local variables and reorder the code
to make more sense.
Additionally the ncells_max member of the virCPUDef structure is used
only for tracking allocation when parsing the numa definition, which can
be avoided by switching to VIR_ALLOC_N as the array is not resized
after initial allocation.
The "virDomainGetInfo" will get for running domain only live info and for
offline domain only config info. There was no way how to get config info
for running domain. We will use "vshCPUCountCollect" instead to get the
correct cpu count that we need to pass to "virDomainGetVcpuPinInfo".
Also cleanup some unnecessary variables and checks that are done by
drivers.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1160559
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Not all machine types support all devices, device properties, backends,
etc. So until we create a matrix of [machineType, qemuCaps], lets just
filter out some capabilities before we return them to the consumer
(which is going to make decisions based on them straight away).
Currently, as qemu is unable to tell which capabilities are (not)
enabled for given machine types, it's us who has to hardcode the matrix.
One day maybe the hardcoding will go away and we can create the matrix
dynamically on the fly based on a few monitor calls.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So, when building the '-numa' command line, the
qemuBuildMemoryBackendStr() function does quite a lot of checks to
chose the best backend, or to check if one is in fact needed. However,
it returned that backend is needed even for this little fella:
<numatune>
<memory mode="strict" nodeset="0,2"/>
</numatune>
This can be guaranteed via CGroups entirely, there's no need to use
memory-backend-ram to let qemu know where to get memory from. Well, as
long as there's no <memnode/> element, which explicitly requires the
backend. Long story short, we wouldn't have to care, as qemu works
either way. However, the problem is migration (as always). Previously,
libvirt would have started qemu with:
-numa node,memory=X
in this case and restricted memory placement in CGroups. Today, libvirt
creates more complicated command line:
-object memory-backend-ram,id=ram-node0,size=X
-numa node,memdev=ram-node0
Again, one wouldn't find anything wrong with these two approaches.
Both work just fine. Unless you try to migrated from the older libvirt
into the newer one. These two approaches are, unfortunately, not
compatible. My suggestion is, in order to allow users to migrate, lets
use the older approach for as long as the newer one is not needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Well, we can pretend that we've asked numad for its suggestion and let
qemu command line be built with that respect. Again, this alone has no
big value, but see later commits which build on the top of this.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In order for QEMU vCPU (and other) threads to run with RT scheduler,
libvirt needs to take care of that so QEMU doesn't have to run privileged.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1178986
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In our RNG schema we do allow multiple (different) seclabels per-domain,
but don't allow this for devices, yet we neither have a check in our XML parser,
nor in a post-parse callback. In that case we should allow multiple
(different) seclabels for devices as well.
Move the alias name right after the object type for rng-egd backend so
that we can later use the JSON to commandline generator to create the
command line.
Libvirt didn't prefix the random number generator backend object alias
with any string thus the device alias and object alias were identical.
To avoid possible problems, rename the alias for the backend object and
tweak tests to comply with the change.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
It is only supported for virtio adapters.
Silently drop it if it was specified for other models,
as is done for other virtio attributes.
Also mention this in the documentation.
https://bugzilla.redhat.com/show_bug.cgi?id=1147195
If a storage file would be backed with a NBD device without path
(nbd://localhost) libvirt would crash when parsing the backing path for
the disk as the URI structure's path element is NULL in such case but
the NBD parser would access it shamelessly.
Some code paths have special logic depending on the page size
reported by sysconf, which in turn affects the test results.
We must mock this so tests always have a consistent page size.
Change done by commit f309db1f4d wrongly
assumes that qemu can start with a combination of NUMA nodes specified
with the "memdev" option and the appropriate backends, and the legacy
way by specifying only "mem" as a size argument. QEMU rejects such
commandline though:
$ /usr/bin/qemu-system-x86_64 -S -M pc -m 1024 -smp 2 \
-numa node,nodeid=0,cpus=0,mem=256 \
-object memory-backend-ram,id=ram-node1,size=12345 \
-numa node,nodeid=1,cpus=1,memdev=ram-node1
qemu-system-x86_64: -numa node,nodeid=1,cpus=1,memdev=ram-node1: qemu: memdev option must be specified for either all or no nodes
To fix this issue we need to check if any of the nodes requires the new
definition with the backend and if so, then all other nodes have to use
it too.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1182467
QEMU's command line visitor as well as the JSON interface take bytes by
default for memory object sizes. Convert mebibytes to bytes so that we
can later refactor the existing code for hotplug purposes.
QEMU's qapi visitor code allows yes/on/y for true and no/off/n for false
value of boolean properities. Unify the used style so that we can
generate it later and fix test cases.
Unlike -device, qemu uses a JSON object to add backend "objects" via the
monitor rather than the string that would be passed on the commandline.
To be able to reuse code parts that configure backends for various
devices, this patch adds a helper that will allow generating the command
line representations from the JSON property object.
Adding or reordering test cases is usually a pain due to static test
case names that are then passed to virtTestRun(). To ease the numbering
of test cases, this patch adds two simple helpers that generate the test
names according to the order they are run. The test name can be
configured via the reset function.
This will allow us to freely add test cases in middle of test groups
without the need to re-number the rest of test cases.
https://bugzilla.redhat.com/show_bug.cgi?id=1170492
In one of our previous commits (dc8b7ce7) we've done a functional
change even though it was intended as pure refactor. The problem is,
that the following XML:
<vcpu placement='static' current='2'>6</vcpu>
<cputune>
<emulatorpin cpuset='1-3'/>
</cputune>
<numatune>
<memory mode='strict' placement='auto'/>
</numatune>
gets translated into this one:
<vcpu placement='auto' current='2'>6</vcpu>
<cputune>
<emulatorpin cpuset='1-3'/>
</cputune>
<numatune>
<memory mode='strict' placement='auto'/>
</numatune>
We should not change the vcpu placement mode. Moreover, we're doing
something similar in case of emulatorpin and iothreadpin. If they were
set, but vcpu placement was auto, we've mistakenly removed them from
the domain XML even though we are able to set them independently on
vcpus.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There are some interface types (notably 'server' and 'client')
which instead of allowing the default set of elements and
attributes (like the rest do), try to enumerate only the elements
they know of. This way it's, however, easy to miss something. For
instance, the <address/> element was not mentioned at all. This
resulted in a strange behavior: when such interface was added
into XML, the address was automatically generated by parsing
code. Later, the formatted XML hasn't passed the RNG schema. This
became more visible once we've turned on the XML validation on
domain XML changes: appending an empty line at the end of
formatted XML (to trick virsh think the XML had changed) made
libvirt to refuse the very same XML it formatted.
Instead of trying to find each element and attribute we are
missing in the schema, lets just allow all the elements and
attributes like we're doing that for the rest of types. It's no
harm if the schema is wider than our parser allows.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Well, even though users can pass the list of UEFI:NVRAM pairs at the
configure time, we may maintain the list of widely available UEFI
ourselves too. And as arm64 begin to rises, OVMF was ported there too.
With a slight name change - it's called AAVMF, with AAVMF_CODE.fd
being the UEFI firmware and AAVMF_VARS.fd being the NVRAM store file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Up until now there are just two ways how to specify UEFI paths to
libvirt. The first one is editing qemu.conf, the other is editing
qemu_conf.c and recompile which is not that fancy. So, new
configure option is introduced: --with-loader-nvram which takes a
list of pairs of UEFI firmware and NVRAM store. This way, the
compiled in defaults can be passed during compile time without
need to change the code itself.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For stateless, client side drivers, it is never correct to
probe for secondary drivers. It is only ever appropriate to
use the secondary driver that is associated with the
hypervisor in question. As a result the ESX & HyperV drivers
have both been forced to do hacks where they register no-op
drivers for the ones they don't implement.
For stateful, server side drivers, we always just want to
use the same built-in shared driver. The exception is
virtualbox which is really a stateless driver and so wants
to use its own server side secondary drivers. To deal with
this virtualbox has to be built as 3 separate loadable
modules to allow registration to work in the right order.
This can all be simplified by introducing a new struct
recording the precise set of secondary drivers each
hypervisor driver wants
struct _virConnectDriver {
virHypervisorDriverPtr hypervisorDriver;
virInterfaceDriverPtr interfaceDriver;
virNetworkDriverPtr networkDriver;
virNodeDeviceDriverPtr nodeDeviceDriver;
virNWFilterDriverPtr nwfilterDriver;
virSecretDriverPtr secretDriver;
virStorageDriverPtr storageDriver;
};
Instead of registering the hypervisor driver, we now
just register a virConnectDriver instead. This allows
us to remove all probing of secondary drivers. Once we
have chosen the primary driver, we immediately know the
correct secondary drivers to use.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The function may return NULL if something went wrong. In some places
in the tests we are not checking the return value rather than
accessing the pointer directly resulting in SIGSEGV.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Coverity reports that my commit af1c98e introduced
two memory leaks:
the cpumap if ncpus == 0 in virCgroupGetPercpuStats
and the params array in the test of the function.
My commit af1c98e4 broke the build on RHEL-6:
vircgrouptest.c: In function 'testCgroupGetPercpuStats':
vircgrouptest.c:566: error: nested extern declaration of
'_gl_verify_function2' [-Wnested-externs]
The only thing that needs checking is that the array size
is at least EXPECTED_NCPUS, to prevent access beyond the array.
We can ensure the minimum size also by specifying the array
size upfront.
Per-cpu stats are only shown for present CPUs in the cgroups,
but we were only parsing the largest CPU number from
/sys/devices/system/cpu/present and looking for stats even for
non-present CPUs.
This resulted in:
internal error: cpuacct parse error
https://bugzilla.redhat.com/show_bug.cgi?id=1130390
The listen address is not mandatory for <interface type='server'>
but when it's not specified, we've been formatting it as:
-netdev socket,listen=(null):5558,id=hostnet0
which failed with:
Device 'socket' could not be initialized
Omit the address completely and only format the port in the listen
attribute.
Also fix the schema to allow specifying a model.
When libvirt is configured --without-xen, building the xlconfigtest
fails with
CCLD xlconfigtest
/usr/lib/gcc/x86_64-linux-gnu/4.7/../../../x86_64-linux-gnu/crt1.o
In function `_start': (.text+0x20): undefined reference to `main'
collect2: error: ld returned 1 exit status
Introduced in commit 4ed5fb91 by too much copy and paste from
xmconfigtest.
This adds a new "localOnly" attribute on the domain element of the
network xml. With this set to "yes", DNS requests under that domain
will only be resolved by libvirt's dnsmasq, never forwarded upstream.
This was how it worked before commit f69a6b987d, and I found that
functionality useful. For example, I have my host's NetworkManager
dnsmasq configured to forward that domain to libvirt's dnsmasq, so I can
easily resolve guest names from outside. But if libvirt's dnsmasq
doesn't know a name and forwards it to the host, I'd get an endless
forwarding loop. Now I can set localOnly="yes" to prevent the loop.
Signed-off-by: Josh Stone <jistone@redhat.com>
Do not run ZFS tests when ZFS is unsupported in the environment.
The recent patch b4af40226d adds tests
to storagepoolxml2xmltest for the optional ZFS feature. When ZFS is
not included in the configuration these tests should not / cannot be
run. Modify the test source file to check for use of the feature and
compile in the tests accordingly.
Signed-off-by: Gary R Hook <gary.hook@nimboxx.com>
Ploop is a pseudo device which makeit possible to access
to an image in a file as a block device. Like loop devices,
but with additional features, like snapshots, write tracker
and without double-caching.
It used in PCS for containers and in OpenVZ. You can manage
ploop devices and images with ploop utility
(http://git.openvz.org/?p=ploop).
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
systemd-machined introduced a new method CreateMachineWithNetwork
that obsoletes CreateMachine. It expects to be given a list of
VETH/TAP device indexes for the host side device(s) associated
with a container/machine.
This falls back to the old CreateMachine method when the new
one is not supported.
Add disk and spice config tests for the xen_xl config parser
Signed-off-by: Kiarie Kahurani <davidkiarie4@gmail.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
There's this function virNetDevBandwidthParse which parses the
bandwidth XML snippet. But it's not clever much. For the
following XML it allocates the virNetDevBandwidth structure even
though it's completely empty:
<bandwidth>
</bandwidth>
Later in the code there are some places where we check if
bandwidth was set or not. And since we obtained pointer from the
parsing function we think that it is when in fact it isn't.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The virDomainDefParse* and virDomainDefFormat* methods both
accept the VIR_DOMAIN_XML_* flags defined in the public API,
along with a set of other VIR_DOMAIN_XML_INTERNAL_* flags
defined in domain_conf.c.
This is seriously confusing & error prone for a number of
reasons:
- VIR_DOMAIN_XML_SECURE, VIR_DOMAIN_XML_MIGRATABLE and
VIR_DOMAIN_XML_UPDATE_CPU are only relevant for the
formatting operation
- Some of the VIR_DOMAIN_XML_INTERNAL_* flags only apply
to parse or to format, but not both.
This patch cleanly separates out the flags. There are two
distint VIR_DOMAIN_DEF_PARSE_* and VIR_DOMAIN_DEF_FORMAT_*
flags that are used by the corresponding methods. The
VIR_DOMAIN_XML_* flags received via public API calls must
be converted to the VIR_DOMAIN_DEF_FORMAT_* flags where
needed.
The various calls to virDomainDefParse which hardcoded the
use of the VIR_DOMAIN_XML_INACTIVE flag change to use the
VIR_DOMAIN_DEF_PARSE_INACTIVE flag.
The virCPUDefFormat* methods were relying on the VIR_DOMAIN_XML_*
flag definitions. It is not desirable for low level internal
functions to be coupled to flags for the public API, since they
may need to be called from several different contexts where the
flags would not be appropriate.
QEMU supports feature specification with -cpu host and we just skip
using that. Since QEMU developers themselves would like to use this
feature, this patch modifies the code to work.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1178850
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Well, apparently it's possible for a patch to sneak in through
review process and break 'make check'. It happened just lately
with 0e502466ac which changed the default of vgamem_mb for
qxl device. However, there were left some domain XMLs within our
test suite relying on the old default. These should be updated to
match the change.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
VMware ESX does not always set the "serialX.fileType" tag in VMX files. The
default value for this tag is "device", and when adding a new serial port
of this type VMware will omit the fileType tag. This caused libvirt to
fail to parse the VMX file. Fixed by making this tag optional and using
"device" as a default value. Also updated vmx2xmltest to test for this
case.
Signed-off-by: Eric Blake <eblake@redhat.com>
Make use of the ebtables functionality to be able to filter certain
parameters of icmpv6 packets. Extend the XML parser for icmpv6 types,
type ranges, codes, and code ranges. Extend the nwfilter documentation,
schema, and test cases.
Being able to filter icmpv6 types and codes helps extending the DHCP
snooper for IPv6 and filtering at least some parameters of IPv6's NDP
(Neighbor Discovery Protocol) packets. However, the filtering will not
be as good as the filtering of ARP packets since we cannot
check on IP addresses in the payload of the NDP packets.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Add the possibility to have more than one IP address configured for a
domain network interface. IP addresses can also have a prefix to define
the corresponding netmask.
Add tests to testing HVM default features (pae, acpi, apic)
conversion from xm config to libvirt xml. If no pae|acpi|apic
specified in xm config, after conversion, libvirt xml should
by default include:
<features>
<pae/>
<apic/>
<acpi/>
</features>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
The <domain/> element under /capabilities/guest/arch/ can have no
child elements. If that's the case we format:
<domain type='xen'>
</domain>
instead of simpler:
<domain type='xen'/>
This commit fixes that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There are two more places after commit 3865941b that need to be adapted
in order to get rid of some test failures when building as root.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Some of the nwfilter tests are now failing since --concurrent shows
up in the ebtables command. To avoid this, implement a function
preventing the probing for lock support in the eb/iptables tools
and use it in the tests.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Libvirt BZ: https://bugzilla.redhat.com/show_bug.cgi?id=1175397
QEMU BZ: https://bugzilla.redhat.com/show_bug.cgi?id=1170093
In qemu there are two interesting arguments:
1) -numa to create a guest NUMA node
2) -object memory-backend-{ram,file} to tell qemu which memory
region on which host's NUMA node it should allocate the guest
memory from.
Combining these two together we can instruct qemu to create a
guest NUMA node that is tied to a host NUMA node. And it works
just fine. However, depending on machine type used, there might
be some issued during migration when OVMF is enabled (see QEMU
BZ). While this truly is a QEMU bug, we can help avoiding it. The
problem lies within the memory backend objects somewhere. Having
said that, fix on our side consists on putting those objects on
the command line if and only if needed. For instance, while
previously we would construct this (in all ways correct) command
line:
-object memory-backend-ram,size=256M,id=ram-node0 \
-numa node,nodeid=0,cpus=0,memdev=ram-node0
now we create just:
-numa node,nodeid=0,cpus=0,mem=256
because the backend object is obviously not tied to any specific
host NUMA node.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Volume and pool formatting functions took different approaches to
unspecified uids/gids. When unknown, it is always parsed as -1, but one
of the functions formatted it as unsigned int (wrong) and one as
int (better). Due to that, our two of our XML files from tests cannot
be parsed on 32-bit machines.
RNG schema needs to be modified as well, but because both
storagepool.rng and storagevol.rng need same schema for permission
element, save some space by moving it to storagecommon.rng.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1173507
It occurred to me that OpenStack uses the following XML when not using
regular huge pages:
<memoryBacking>
<hugepages>
<page size='4' unit='KiB'/>
</hugepages>
</memoryBacking>
However, since we are expecting to see huge pages only, we fail to
startup the domain with following error:
libvirtError: internal error: Unable to find any usable hugetlbfs
mount for 4 KiB
While regular system pages are not huge pages technically, our code is
prepared for that and if it helps OpenStack (or other management
applications) we should cope with that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1160995
In our config files users are expected to pass several integer values
for different configuration knobs. However, majority of them expect a
nonnegative number and only a few of them accept a negative number too
(notably keepalive_interval in libvirtd.conf).
Therefore, a new type to config value is introduced: VIR_CONF_ULONG
that is set whenever an integer is positive or zero. With this
approach knobs accepting VIR_CONF_LONG should accept VIR_CONF_ULONG
too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The macTableManager attribute of a network's bridge subelement tells
libvirt how the bridge's MAC address table (used to determine the
egress port for packets) is managed. In the default mode, "kernel",
management is left to the kernel, which usually determines entries in
part by turning on promiscuous mode on all ports of the bridge,
flooding packets to all ports when the correct destination is unknown,
and adding/removing entries to the fdb as it sees incoming traffic
from particular MAC addresses. In "libvirt" mode, libvirt turns off
learning and flooding on all the bridge ports connected to guest
domain interfaces, and adds/removes entries according to the MAC
addresses in the domain interface configurations. A side effect of
turning off learning and unicast_flood on the ports of a bridge is
that (with Linux kernel 3.17 and newer), the kernel can automatically
turn off promiscuous mode on one or more of the bridge's ports
(usually only the one interface that is used to connect the bridge to
the physical network). The result is better performance (because
packets aren't being flooded to all ports, and can be dropped earlier
when they are of no interest) and slightly better security (a guest
can still send out packets with a spoofed source MAC address, but will
only receive traffic intended for the guest interface's configured MAC
address).
The attribute looks like this in the configuration:
<network>
<name>test</name>
<bridge name='br0' macTableManager='libvirt'/>
...
This patch only adds the config knob, documentation, and test
cases. The functionality behind this knob is added in later patches.
If probing capabilities via QMP fails, we now have a check
that prevents us falling back to -help parsing. Unfortunately
the error message
"Failed to probe capabilities for /usr/bin/qemu-kvm:
unsupported configuration: QEMU 2.1.2 is too new for help parsing"
is proving rather unhelpful to the user. We need to be telling
them why QMP failed (the root cause), rather than they can't
use -help (the side effect).
To do this we should capture stderr during QMP probing, and
if -help parsing then sees a new QEMU version, we know that
QMP should have worked, and so we can show the messages from
stderr. The message thus becomes
"Failed to probe capabilities for /usr/bin/qemu-kvm:
internal error: QEMU / QMP failed: Could not access
KVM kernel module: No such file or directory
failed to initialize KVM: No such file or directory"
When trying clang, it found out that we were comparing sizeof with 0
even though we wanted to check the return value of memcmp. That showed
us that the test was wrong and it needs a fix as well.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
It looks like it was copy-pasted, so in case anyone wonders what some of
those methods do without looking at them, and for the sake of
completeness, fix them.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit 2aa167ca tried to fix the DBus interaction code to allow
callers to use native types instead of 4-byte bools. But in
fixing the issue, I missed the case of an arrayref; Conrad Meyer
shows the following valid complaint issued by clang:
CC util/libvirt_util_la-virdbus.lo
util/virdbus.c:956:13: error: cast from 'bool *' to 'dbus_bool_t *' (aka 'unsigned int *') increases required alignment from 1 to 4 [-Werror,-Wcast-align]
GET_NEXT_VAL(dbus_bool_t, bool_val, bool, "%d");
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/virdbus.c:858:17: note: expanded from macro 'GET_NEXT_VAL'
x = (dbustype *)(*xptrptr + (*narrayptr - 1)); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated.
But fixing that points out that we have NEVER supported arrayrefs
of sub-int types (byte, i16, u16, and now bool). Again, while raw
types promote, arrays do not; so the macros HAVE to deal with both
size possibilities rather than assuming that an arrayref uses the
same sizing as the promoted raw type.
Obviously, our testsuite wasn't covering as much as it should have.
* src/util/virdbus.c (GET_NEXT_VAL): Also fix array cases.
(SET_NEXT_VAL): Fix uses of sub-int arrays.
* tests/virdbustest.c (testMessageArray, testMessageArrayRef):
Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add attribute to set vgamem_mb parameter of QXL device for QEMU. This
value sets the size of VGA framebuffer for QXL device. Default value in
QEMU is 8MB so reuse it also in libvirt to not break things.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
So far we didn't have any option to set video memory size for qemu video
devices. There was only the vram (ram for QXL) attribute but it was valid
only for the QXL video device.
To provide this feature to users QEMU has a dedicated device attribute
called 'vgamem_mb' to set the video memory size. We will use the 'vram'
attribute for setting video memory size for other QEMU video devices.
For the cirrus device we will ignore the vram value because it has
hardcoded video size in QEMU.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
QEMU has two different type of QXL display device. The first "qxl-vga"
is for primary video device and second "qxl" is for secondary video
device.
There are also two different ways how to specify those devices on qemu
command line, the first one and obsolete is using "-vga" option and the
current new one is using "-device" option. The "-vga" could be used only
to setup primary video device, so the "-vga qxl" equal to
"-device qxl-vga". Unfortunately the "-vga qxl" doesn't support setting
additional parameters for the device and "-global" option must be used
for this purpose. It's mandatory to use "-global qxl-vga...." to set the
parameters of primary video device previously defined with "-vga qxl".
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The vram attribute was introduced to set the video memory but it is
usable only for few hypervisors excluding QEMU/KVM and the old XEN
driver. Only in case of QEMU the vram was used for QXL.
This patch updates the documentation to reflect current code in libvirt
and also changes the cases when we will set the default vram attribute.
It also fixes existing strange default value for VGA devices 9MB to 16MB
because the video ram should be rounded to power of two.
The change of default value could affect migrations but I found out that
QEMU always round the video ram to power of two internally so it's safe
to change the default value to the next closest power of two and also
silently correct every domain XML definition. And it's also safe because
we don't pass the value to QEMU.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
There are two special cases, if the input number is 0 or the number is
larger then 2^31 (for 32bit unsigned int). For the special cases the
return value is 0 because they cannot be rounded.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Add test cases for qemuAgentGetFSInfo, with a sample agent response for
the qemu-get-fsinfo command and a configuration xml.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Improve the monitor function to also retrieve the guest state of
character device (if provided) so that we can refresh the state of
virtio-serial channels and perhaps react to changes in the state in
future patches.
This patch changes the returned data from qemuMonitorGetChardevInfo to
return a structure containing the pty path and the state for all the
character devices.
The change to the testsuite makes sure that the data is parsed
correctly.
To be able to express some use cases of the RBD backing with libvirt, we
need to be able to specify a config file for the RBD client to qemu as
that is one of the commonly used options.
Some storage systems have internal support for snapshots. Libvirt should
be able to select a correct snapshot when starting a VM.
This patch adds a XML element to select a storage source snapshot for
the RBD protocol which supports this feature.
As we now have a common function to parse backing store string for RBD
backing store we can reuse it in the backing store walker so that we
don't fail on files backed by RBD storage.
This patch also adds a few tests to verify that the parsing works as
expected.
To track state of virtio channels this patch adds a new output-only
attribute called 'state' to the <target> element of virtio channels.
This will be later populated with the guest state of the channel.
To unify future additions that require information from "query-chardev"
rename qemuMonitorGetPtyPaths and friends to qemuMonitorGetChardevInfo
and move the allocation of the returned hash into the top level
function.
To simplify looking for a problem instrument the XML comparator function
with possibility to print the filename of the failed/expected XML
output.
This is necessary as the VIR_TEST_DIFFERENT macro possibly tests two XML
files for the inactive/active state and the resulting error may not be
obvious.
Use of an 'int' to represent a 'bool' value is confusing. Just
because dbus made the mistake of cementing their 4-byte wire
format of dbus_bool_t into their API doesn't mean we have to
repeat the mistake. With a little bit of finesse, we can
guarantee that we provide a large-enough value to the DBus
code, while still copying only the relevant one-byte bool
to the client code, and isolate the rest of our code base from
the DBus stupidity.
* src/util/virdbus.c (GET_NEXT_VAL): Add parameter.
(virDBusMessageIterDecode): Adjust all clients.
* src/util/virpolkit.c (virPolkitCheckAuth): Use nicer type.
* tests/virdbustest.c (testMessageSimple, testMessageStruct):
Test new behavior.
Signed-off-by: Eric Blake <eblake@redhat.com>
The recent commit to add support for block_set_io_throttle parameters
from version 1.7 of qemu did not add any tests - this adds the tests
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since QEMU 1.2.0, we switched to QMP probing instead of parsing -help
(and other commands, such as -cpu ?) output. However, if QMP probing
failed, we still tried starting QEMU with various options and parsing
the output, which was guaranteed to fail because the output changed.
Let's just refuse parsing -help for QEMU >= 1.2.0.
https://bugzilla.redhat.com/show_bug.cgi?id=1160318
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We used to set migration capabilities only when a user asked for them in
flags. This is fine when migration succeeds since the QEMU process is
killed in the end but in case migration fails or if it's cancelled, some
capabilities may remain turned on with no way to turn them off. To fix
that, migration capabilities have to be turned on if requested but
explicitly turned off in case they were not requested but QEMU supports
them.
https://bugzilla.redhat.com/show_bug.cgi?id=1163953
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Rather than just picking the first CD (or failing that, HDD) we come
across, if the user has picked a boot device ordering with <boot
order=''>, respect that (and just try to boot the lowest-index device).
Adds two sets of tests to bhyve2xmlargv; 'grub-bootorder' shows that we
pick a user-specified device over the first device in the domain;
'grub-bootorder2' shows that we pick the first (lowest index) device.
As I was reviewing bhyve commits, I've noticed qemuxml2argvtest
failing for some test cases. This is not bug in qemu driver code
rather than being unable to load qemuxml2argvmock on non-Linux
platforms. For instance:
318) QEMU XML-2-ARGV numatune-memnode
... libvirt: error : internal error: NUMA node 0 is unavailable
FAILED
Rather than disabling qemuxml2argvtest on BSD (we do compile qemu
driver there) disable only those test cases which require mocking.
To achieve that goal new DO_TEST_LINUX() macro is introduced which
invokes the test case on Linux only and consume arguments on other
systems.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1160926
Introduce a 'managed' attribute to allow libvirt to decide whether to
delete a vHBA vport created via external means such as nodedev-create.
The code currently decides whether to delete the vHBA based solely on
whether the parent was provided at creation time. However, that may not
be the desired action, so rather than delete and force someone to create
another vHBA via an additional nodedev-create allow the configuration of
the storage pool to decide the desired action.
During createVport when libvirt does the VPORT_CREATE, set the managed
value to YES if not already set to indicate to the deleteVport code that
it should delete the vHBA when the pool is destroyed.
If libvirtd is restarted all the memory only state was lost, so for a
persistent storage pool, use the virStoragePoolSaveConfig in order to
write out the managed value.
Because we're now saving the current configuration, we need to be sure
to not save the parent in the output XML if it was undefined at start.
Saving the name would cause future starts to always use the same parent
which is not the expected result when not providing a parent. By not
providing a parent, libvirt is expected to find the best available
vHBA port for each subsequent (re)start.
At deleteVport, use the new managed value to decide whether to execute
the VPORT_DELETE. Since we no longer save the parent in memory or in
XML when provided, if it was not provided, then we have to look it up.
Add support for bps_max and friends in the driver part.
In the part checking if a qemu is running, check if the running binary
support bps_max, if not print an error message, if yes add it to
"info" variable
Signed-off-by: Matthias Gatto <matthias.gatto@outscale.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add the capability to detect if the qemu binary have the capability
to use bps_max and friends
Add a value in the enum virQEMUCapsFlags for the qemu capability.
Set it with virQEMUCapsSet if the binary suport bps_max and they friends.
Signed-off-by: Matthias Gatto <matthias.gatto@outscale.com>
Modify the structure _virDomainBlockIoTuneInfo to support these the new
options.
Change the initialization of the variable expectedInfo in qemumonitorjsontest.c
to avoid compiling problem.
Add documentation about the new xml options
Signed-off-by: Matthias Gatto <matthias.gatto@outscale.com>
CPU numa topology implicitly allows memory specification in 'KiB'.
Enabling this to accept the 'unit' in which memory needs to be specified.
This now allows users to specify memory in units of choice, and
lists the same in 'KiB' -- just like other 'memory' elements in XML.
<numa>
<cell cpus='0-3' memory='1024' unit='MiB' />
<cell cpus='4-7' memory='1024' unit='MiB' />
</numa>
Also augment test cases to correctly model NUMA memory specification.
This adds the tag 'unit="KiB"' for memory attribute in NUMA cells.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This introduces a testcase for PowerPC compat mode cpu specification.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extending the iothread disk support from pci to pci and ccw.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
This is a reaction to Michal's fix [1] for non-NUMA systems that also
splits out conf/ out of util/ because libvirt_util shouldn't require
libvirt_conf if it is the other way around. This particular use case
worked, but we're trying to avoid it as mentioned [2], many times.
The only functions from virnuma.c that needed numatune_conf were
virDomainNumatuneNodesetIsAvailable() and virNumaSetupMemoryPolicy().
The first one should be in numatune_conf as it works with
virDomainNumatune, the second one just needs nodeset and mode, both of
which can be passed without the need of numatune_conf.
Apart from fixing that, this patch also fixes recently added
code (between commits d2460f85^..5c8515620) that doesn't support
non-contiguous nodesets. It uses new function
virNumaNodesetIsAvailable(), which doesn't need a stub as it doesn't use
any libnuma functions, to check if every specified nodeset is available.
[1] https://www.redhat.com/archives/libvir-list/2014-November/msg00118.html
[2] http://www.redhat.com/archives/libvir-list/2011-June/msg01040.html
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Patch 43b67f2e disallowed network tuning only with qemu driver, however
this patch moved the check for root privileges into
virNetDevBandwidthSet function, so the call should now
fail in all possible cases. A mock function was created so that the test
suite doesn't fail because of unsufficient privileges.
There was no check for 'nodeset' attribute in numatune-related
elements. This patch adds validation that any nodeset specified does
not exceed maximum host node.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Particularly in qemuBuildNumaArgStr(), there was a need for the advice
due to memory backing, which needs to know the nodeset it will be pinned
to. With newer qemu this caused the following error when starting
domain:
error: internal error: Advice from numad is needed in case of
automatic numa placement
even when starting perfectly valid domain, e.g.:
...
<vcpu placement='auto'>4</vcpu>
<numatune>
<memory mode='strict' placement='auto'/>
</numatune>
<cpu>
<numa>
<cell id='0' cpus='0' memory='524288'/>
<cell id='1' cpus='1' memory='524288'/>
</numa>
</cpu>
...
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1138545
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The code that parses the schema from the URI touches the "hosts[0]"
member of the storage file source structure in case the URI contains a
schema. The hosts array was not yet allocated at the point in the code
where the transport protocol was parsed and set. This lead to a crash of
libvirtd.
Fix the code by allocating the "hosts" array upfront and add a test case
to verify this scenario. (Unfortunately this requires shuffling the test
case numbers too).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1156288
C guarantees that static variables are zero-initialized. Some older
compilers (and also gcc -fno-zero-initialized-in-bss) create larger
binaries if you explicitly zero-initialize a static variable.
* tests/eventtest.c: Fix initialization.
* tests/testutils.c: Likewise.
* tests/virhostdevtest.c: Likewise.
* tests/virportallocatortest.c: Likewise.
* tests/virscsitest.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
In a clean build system (Ubuntu 14.04), the viridentitytest failed to compile.
Even if all the SELINUX libraries and depedencies are installed. See the error
message below:
[...]
CC viridentitytest.o
CCLD viridentitytest
/usr/bin/ld: viridentitytest.o: undefined reference to symbol
'security_disable'
//lib/x86_64-linux-gnu/libselinux.so.1: error adding symbols: DSO missing
from command line
collect2: error: ld returned 1 exit status
make: *** [viridentitytest] Error 1
Simply adding the variable SELINUX_LIBS in viridentitytest rules of
Makefile.am to include SELINUX libraries into viridentitytest solved that
compilation issue.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
VIR_TEST_DEBUG=2 ./qemuxml2argvtest generates the following output:
409) QEMU XML-2-ARGV shmem-invalid-size
... Got expected error: unsupported configuration: ivshmem device is not \
supported with this QEMU binary
OK
410) QEMU XML-2-ARGV shmem-small-size
... Got expected error: unsupported configuration: ivshmem device is not \
supported with this QEMU binary
OK
We should have:
409) QEMU XML-2-ARGV shmem-invalid-size
... Got expected error: XML error: shmem size must be a power of two
OK
410) QEMU XML-2-ARGV shmem-small-size
... Got expected error: XML error: shmem size must be at least 1 MiB
OK
This commit fixes the issue by providing QEMU_CAPS_DEVICE_IVSHMEM caps
for shmem-invalid-size, shmem-small-size test.
Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
The mode attribute is required for the source element of vhost-user.
Thus virDomainNetDefFormat should always generate a xml with it and not
only when the mode is server.
The commit fixes the issue. And it adds a vhostuser interface in
'client' mode to qemuxml2argv-net-vhostuser.(args|xml) to test this
usecase.
Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
if specifying migration_host to an Ipv6 address without brackets,
it was resolved to an incorrect address, such as:
tcp:2001:0DB8::1428:4444,
but the correct address should be:
tcp:[2001:0DB8::1428]:4444
so we should add brackets when parsing it.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
This function can be called at any time to get the current status of a
guest's network device rx-filter. In particular it is useful to call
after libvirt recieves a NIC_RX_FILTER_CHANGED event - this event only
tells you that something has changed in the rx-filter, the details are
retrieved with the query-rx-filter monitor command (only available in
the json monitor). The command sent to the qemu monitor looks like this:
{"execute":"query-rx-filter", "arguments": {"name":"net2"} }'
and the results will look something like this:
{
"return": [
{
"promiscuous": false,
"name": "net2",
"main-mac": "52:54:00:98:2d:e3",
"unicast": "normal",
"vlan": "normal",
"vlan-table": [
42,
0
],
"unicast-table": [
],
"multicast": "normal",
"multicast-overflow": false,
"unicast-overflow": false,
"multicast-table": [
"33:33:ff:98:2d:e3",
"01:80:c2:00:00:21",
"01:00:5e:00:00:fb",
"33:33:ff:98:2d:e2",
"01:00:5e:00:00:01",
"33:33:00:00:00:01"
],
"broadcast-allowed": false
}
],
"id": "libvirt-14"
}
This is all parsed from JSON into a virNetDevRxFilter object for
easier consumption. (unicast-table is usually empty, but is also an
array of mac addresses similar to multicast-table).
(NB: LIBNL_CFLAGS was added to tests/Makefile.am because virnetdev.h
now includes util/virnetlink.h, which includes netlink/msg.h when
appropriate. Without LIBNL_CFLAGS, gcc can't find that file (if
libnl/netlink isn't available, LIBNL_CFLAGS will be empty and
virnetlink.h won't try to include netlink/msg.h anyway).)
This new attribute will control whether or not libvirt will pay
attention to guest notifications about changes to network device mac
addresses and receive filters. The default for this is 'no' (for
security reasons). If it is set to 'yes' *and* the specified device
model and connection support it (currently only macvtap+virtio) then
libvirt will watch for NIC_RX_FILTER_CHANGED events, and when it
receives one, it will issue a query-rx-filter command, retrieve the
result, and modify the host-side macvtap interface's mac address and
unicast/multicast filters accordingly.
The functionality behind this attribute will be in a later patch. This
patch merely adds the attribute to the top-level of a domain's
<interface> as well as to <network> and <portgroup>, and adds
documentation and schema/xml2xml tests. Rather than adding even more
test files, I've just added the net attribute in various applicable
places of existing test files.
This patch implements support for the ivshmem device in QEMU.
Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Ivshmem is supported by QEMU since 0.13 release.
Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch adds parsing/formatting code as well as documentation for
shared memory devices. This will currently be only accessible in QEMU
using it's ivshmem device, but is designed as generic as possible to
allow future expansion for other hypervisors.
In the devices section in the domain XML users may specify:
- For shmem device using a server:
<shmem name='shmem0'>
<server path='/tmp/socket-ivshmem0'/>
<size unit='M'>32</size>
<msi vectors='32' ioeventfd='on'/>
</shmem>
- For ivshmem device not using an ivshmem server:
<shmem name='shmem1'>
<size unit='M'>32</size>
</shmem>
Most of the configuration is made optional so it also allows
specifications like:
<shmem name='shmem1/>
<shmem name='shmem2'>
<server/>
</shmem>
Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Right now when building the qemu command line, we try to do various
unconditional validations of the guest CPU against the host CPU. However
this checks are overly applied. The only time we should use the checks
are:
- The user requests host-model/host-passthrough, or
- When KVM is requsted. CPU features requested in TCG mode are always
emulated by qemu and are independent of the host CPU, so no host CPU
checks should be performed.
Right now if trying to specify a CPU for arm on an x86 host, it attempts
to do non-sensical validation and falls over.
Switch all the test cases that were intending to test CPU validation to
use KVM, so they continue to test the intended code.
Amend some aarch64 XML tests with a CPU model, to ensure things work
correctly.
Spawning the pkcheck program every time a permission check is
required is hugely expensive on CPU. The pkcheck program is just
a dumb wrapper for the DBus API, so rewrite the code to use the
DBus API directly. This also simplifies error handling a bit.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add options for tuning segment offloading:
<driver>
<host csum='off' gso='off' tso4='off' tso6='off'
ecn='off' ufo='off'/>
<guest csum='off' tso4='off' tso6='off' ecn='off' ufo='off'/>
</driver>
which control the respective host_ and guest_ properties
of the virtio-net device.
Add a new parameter to virStorageFileGetMetadata that will break the
backing chain detection process and report useful error message rather
than having to use virStorageFileChainGetBroken.
This patch just introduces the option, usage will be provided
separately.
We are not detecting the presence of FIPS from QEMU, but from procfs and
that means it's not QEMU capability. It was decided that we will pass
this flag to QEMU even if it's not supported by old QEMU binaries.
This patch also reverts changes done by commit a21cfb0f to
qemucapabilitestest and implements a new test case in qemuxml2argvtest.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1135431
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
- Provide an implementation for buildPool and deletePool operations
for the ZFS storage backend.
- Add VIR_STORAGE_POOL_SOURCE_DEVICE flag to ZFS pool poolOptions
as now we can specify devices to build pool from
- storagepool.rng: add an optional 'sourceinfodev' to 'sourcezfs' and
add an optional 'target' to 'poolzfs' entity
- Add a couple of tests to storagepoolxml2xmltest
Commit f05b6a91 added virQEMUDriverConfigPtr argument to the
virQEMUCapsFillDomainCaps function and it uses forward declaration
of virQEMUDriverConfig and virQEMUDriverConfigPtr that casues clang
build to fail:
gmake[3]: Entering directory `/usr/home/novel/code/libvirt/src'
CC qemu/libvirt_driver_qemu_impl_la-qemu_capabilities.lo
In file included from qemu/qemu_capabilities.c:43:
In file included from qemu/qemu_hostdev.h:27:
qemu/qemu_conf.h:63:37: error: redefinition of typedef 'virQEMUDriverConfig'
is a C11 feature [-Werror,-Wtypedef-redefinition]
typedef struct _virQEMUDriverConfig virQEMUDriverConfig;
^
qemu/qemu_capabilities.h:328:37: note: previous definition is here
typedef struct _virQEMUDriverConfig virQEMUDriverConfig;
^
Fix that by passing loader and nloader config attributes directly
instead of passing complete config.
Commit b20d39a introduced a new argument for the
virNetDevTapCreateInBridgePort function, however, its mock
in bhyve tests wasn't updated, so the build failed.
Fix build by adding this new argument to the mock version.
https://bugzilla.redhat.com/show_bug.cgi?id=1135396
There are two ways how to tell qemu to use huge pages. The first one
is suitable for domains with NUMA nodes: the path to hugetlbfs mount
is appended to NUMA node definition on the command line. The second
one is suitable for UMA domains: here there's this global '-mem-path'
argument that accepts path to the hugetlbfs mount point. However, the
latter case was not used for all the cases that it should be. For
instance:
<memoryBacking>
<hugepages>
<page size='2048' unit='KiB' nodeset='0'/>
</hugepages>
</memoryBacking>
didn't trigger the '-mem-path' so the huge pages - despite being
configured - were not used at all.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
As of 136ad4974 it is possible to specify different huge pages per
guest NUMA node. However, there's no check if nodeset specified in
./hugepages/page contains only those guest NUMA nodes that exist.
In other words with current code it is possible to define meaningless
combination:
<memoryBacking>
<hugepages>
<page size='1048576' unit='KiB' nodeset='0,2-3'/>
<page size='2048' unit='KiB' nodeset='1,4'/>
</hugepages>
</memoryBacking>
<vcpu placement='static'>4</vcpu>
<cpu>
<numa>
<cell id='0' cpus='0' memory='1048576'/>
<cell id='1' cpus='1' memory='1048576'/>
<cell id='2' cpus='2' memory='1048576'/>
<cell id='3' cpus='3' memory='1048576'/>
</numa>
</cpu>
Notice the node 4 in <hugepages/>?
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
As of f05b6a918e the test produces the list of paths that can
be passed to <loader/> and libvirt knows about them. However,
during the process of generating the list the paths are checked
for their presence. This may produce different results on
different systems. Therefore, the path - if missing - is
added to pretend it's there.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Check to see if the UEFI binary mentioned in qemu.conf actually
exists, and if so expose it in domcapabilities like
<loader ...>
<value>/path/to/ovmf</value>
</loader>
We introduce some generic domcaps infrastructure for handling
a dynamic list of string values, it may be of use for future bits.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Up till now the virQEMUCapsFillDomainCaps() was type of void as
there was no way for it to fail. This is, however, going to
change in the next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
As of 542899168c we learned libvirt to use UEFI for domains.
However, management applications may firstly query if libvirt
supports it. And this is where virConnectGetDomainCapabilities()
API comes handy.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For tuning the network, alternative devices
for creating tap and vhost devices can be specified via:
<backend tap='/dev/net/tun' vhost='/dev/net-vhost'/>
We already are checking for negative value, reporting an error, but
using wrong function and the check only succeeds when a value that
cannot be converted to number successfully is encountered. This patch
provides just a minor change in call of the right version
of function virStrToLong.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1138539
I noticed this with the recent iothread pinning code, but the
problem existed longer than that. The XML validation required
users to supply <cputune> children in a strict order, even though
there was no conceptual reason why they can't occur in any order.
docs/ changes best viewed with -w
* docs/schemas/domaincommon.rng (cputune): Add interleave.
* tests/qemuxml2argvdata/qemuxml2argv-cputune-iothreads.xml: Swap
up order, copying canonical form...
* tests/qemuxml2xmloutdata/qemuxml2xmlout-cputune-iothreads.xml:
...here.
* tests/qemuxml2xmltest.c (mymain): Mark the difference.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1101574
Add an option 'iothreadpin' to the <cpuset> to allow for setting the
CPU affinity for each IOThread.
The iothreadspin will mimic the vcpupin with respect to being able to
assign each iothread to a specific CPU, although iothreads ids start
at 1 while vcpu ids start at 0. This matches the iothread naming scheme.
Coverity complained that checking the return of virDomainCreate()
was not consistent amongst the callers - so added the return check
to the objecteventtest.c and adjust the virt-login-shell to compare
< 0 rather than just non zero for the failure condition.
Upstream qemu 1.4 added some drive-mirror tunables not present
when it was first introduced in 1.3. Management apps may want
to set these in some cases (for example, without tuning
granularity down to sector size, a copy may end up occupying
more bytes than the original because an entire cluster is
copied even when only a sector within the cluster is dirty,
although tuning it down results in more CPU time to do the
copy). I haven't personally needed to use the parameters, but
since they exist, and since the new API supports virTypedParams,
we might as well expose them.
Since the tuning parameters aren't often used, and omitted from
the QMP command when unspecified, I think it is safe to rely on
qemu 1.3 to issue an error about them being unsupported, rather
than trying to create a new capability bit in libvirt.
Meanwhile, all versions of qemu from 1.4 to 2.1 have a bug where
a bad granularity (such as non-power-of-2) gives a poor message:
error: internal error: unable to execute QEMU command 'drive-mirror': Invalid parameter 'drive-virtio-disk0'
because of abuse of QERR_INVALID_PARAMETER (which is supposed to
name the parameter that was given a bad value, rather than the
value passed to some other parameter). I don't see that a
capability check will help, so we'll just live with it (and it
has since been improved in upstream qemu).
* src/qemu/qemu_monitor.h (qemuMonitorDriveMirror): Add
parameters.
* src/qemu/qemu_monitor.c (qemuMonitorDriveMirror): Likewise.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDriveMirror):
Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDriveMirror):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockCopyCommon): Likewise.
(qemuDomainBlockRebase, qemuDomainBlockCopy): Adjust callers.
* src/qemu/qemu_migration.c (qemuMigrationDriveMirror): Likewise.
* tests/qemumonitorjsontest.c (qemuMonitorJSONDriveMirror): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Rename the VIR_MOCK_IMPL* macros to VIR_MOCK_WRAP*
and add new VIR_MOCK_IMPL macros which let you directly
implement overrides in the preloaded source.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Test suites using the port allocator don't want to have different
behaviour depending on whether a port is in use on the host. Add
a VIR_PORT_ALLOCATOR_SKIP_BIND_CHECK which test suites can use
to skip the bind() test. The port allocator will thus only track
ports in use by the test suite process itself. This is fine when
using the port allocator to generate guest configs which won't
actually be launched
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Coverity complains that the various checks for autoincrement and changed
variables are DEADCODE - seems to me to be a false positive - so mark it.
Signed-off-by: John Ferlan <jferlan@redhat.com>
When using split UEFI image, it may come handy if libvirt manages per
domain _VARS file automatically. While the _CODE file is RO and can be
shared among multiple domains, you certainly don't want to do that on
the _VARS file. This latter one needs to be per domain. So at the
domain startup process, if it's determined that domain needs _VARS
file it's copied from this master _VARS file. The location of the
master file is configurable in qemu.conf.
Temporary, on per domain basis the location of master NVRAM file can
be overridden by this @template attribute I'm inventing to the
<nvram/> element. All it does is holding path to the master NVRAM file
from which local copy is created. If that's the case, the map in
qemu.conf is not consulted.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
QEMU now supports UEFI with the following command line:
-drive file=/usr/share/OVMF/OVMF_CODE.fd,if=pflash,format=raw,unit=0,readonly=on \
-drive file=/usr/share/OVMF/OVMF_VARS.fd,if=pflash,format=raw,unit=1 \
where the first line reflects <loader> and the second one <nvram>.
Moreover, these two lines obsolete the -bios argument.
Note that UEFI is unusable without ACPI. This is handled properly now.
Among with this extension, the variable file is expected to be
writable and hence we need security drivers to label it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Up to now, users can configure BIOS via the <loader/> element. With
the upcoming implementation of UEFI this is not enough as BIOS and
UEFI are conceptually different. For instance, while BIOS is ROM, UEFI
is programmable flash (although all writes to code section are
denied). Therefore we need new attribute @type which will
differentiate the two. Then, new attribute @readonly is introduced to
reflect the fact that some images are RO.
Moreover, the OVMF (which is going to be used mostly), works in two
modes:
1) Code and UEFI variable store is mixed in one file.
2) Code and UEFI variable store is separated in two files
The latter has advantage of updating the UEFI code without losing the
configuration. However, in order to represent the latter case we need
yet another XML element: <nvram/>. Currently, it has no additional
attributes, it's just a bare element containing path to the variable
store file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
To date, anyone performing a block copy and pivot ends up with
the destination being treated as <disk type='file'>. While this
works for data access for a block device, it has at least one
noticeable shortcoming: virDomainGetBlockInfo() reports allocation
differently for block devices visited as files (the size of the
device) than for block devices visited as <disk type='block'>
(the maximum sector used, as reported by qemu); and this difference
is significant when trying to manage qcow2 format on block devices
that can be grown as needed.
Of course, the more powerful virDomainBlockCopy() API can already
express the ability to set the <disk> type. But a new API can't
be backported, while a new flag to an existing API can; and it is
also rather inconvenient to have to resort to the full power of
generating XML when just adding a flag to the older call will do
the trick. So this patch enhances blockcopy to let the user flag
when the resulting XML after the copy must list the device as
type='block'.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_REBASE_COPY_DEV):
New flag.
* src/libvirt.c (virDomainBlockRebase): Document it.
* tools/virsh-domain.c (opts_block_copy, blockJobImpl): Add
--blockdev option.
* tools/virsh.pod (blockcopy): Document it.
* src/qemu/qemu_driver.c (qemuDomainBlockRebase): Allow new flag.
(qemuDomainBlockCopy): Remember the flag, and make sure it is only
used on actual block devices.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit fba6bc4 introduced support for the 'invtsc' feature,
which blocks migration. We should not include it in the
host-model CPU by default, because it's intended to be used
with migration.
https://bugzilla.redhat.com/show_bug.cgi?id=1138221
