This parameter represents top level period cgroup
that limits whole domain enforcement period for a quota
Signed-off-by: Alexander Burluka <aburluka@virtuozzo.com>
When there isn't a ssh -X type session running and a user has not
been added to the libvirt group, attempts to run 'virsh -c qemu:///system'
commands from an otherwise unprivileged user will fail with rather
generic or opaque error message:
"error: authentication failed: no agent is available to authenticate"
This patch will adjust the error code and message to help reflect the
situation that the problem is the requested mechanism is UNAVAILABLE and
a slightly more descriptive error. The result on a failure then becomes:
"error: authentication unavailable: no polkit agent available to
authenticate action 'org.libvirt.unix.manage'"
A bit more history on this - at one time a failure generated the
following type message when running the 'pkcheck' as a subprocess:
"error: authentication failed: polkit\56retains_authorization_after_challenge=1
Authorization requires authentication but no agent is available."
but, a patch was generated to adjust the error message to help provide
more details about what failed. This was pushed as commit id '96a108c99'.
That patch prepended a "polkit: " to the output. It really didn't solve
the problem, but gave a hint.
After some time it was deemed using DBus API calls directly was a
better way to go (since pkcheck calls them anyway). So, commit id
'1b854c76' (more or less) copied the code from remoteDispatchAuthPolkit
and adjusted it. Then commit id 'c7542573' adjusted the remote.c
code to call the new API (virPolkitCheckAuth). Finally, commit id
'308c0c5a' altered the code to call DBus APIs directly. In doing
so, it reverted the failing error message to the generic message
that would have been received from DBus anyway.
This API is merely a convenience API, i.e. when managing clients connected to
daemon's servers, we should know (convenience) which server the specific client
is connected to. This implies a client-side representation of a server along
with a basic API to let the administrating client know what servers are actually
available on the daemon.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This is the key structure of all management operations performed on the
daemon/clients. An admin client needs to be able to identify
another client (either admin or non-privileged client) to perform an
action on it. This identification includes a server the client is
connected to, thus a client-side representation of a server is needed.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
In my previous commit a70f3b1c77 I've tried to fix case
when building from VPATH and a file wasn't being installed.
However, my fix broke non-VPATH build.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The libvirt-common.h is build time generated file from .in.
Obviously, it's generated into builddir and not srcdir. Problem
is, the list of header files to install, virinc_HEADERS contains
only $(srcdir)/*.h and this misses libvirt-common.h. This problem
is pretty obvious when doing a VPATH build.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This new algorithm adds support for wiping volumes using TRIM.
It does not overwrite all the data in a volume, but it tells the
backing storage pool/driver that all bytes in a volume can be
discarded.
It depends on the backing storage pool how this is handled.
A SCSI backend might send UNMAP commands to remove all data present
on a LUN.
A Ceph backend might use rbd_discard() to instruct the Ceph cluster
that all data on that RBD volume can be discarded.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
The VIR_DOMAIN_EVENT_ID_MIGRATION_ITERATION event will be triggered
whenever VIR_DOMAIN_JOB_MEMORY_ITERATION changes its value, i.e.,
whenever a new iteration over guest memory pages is started during
migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
So after da176bf6b7 and friend we have switched to $(wildcard
some/path/*.xml) instead of enumerating the files explicitly.
This is nice, however it makes distcheck build from VPATH fail.
The reason is that it's is not obvious to what does the wildcard
refer to: srcdir or builddir?
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
memory_dirty_rate corresponds to dirty-pages-rate in QEMU and
memory_iteration is what QEMU reports in dirty-sync-count.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commmit df8192aa introduced admin related rename and some minor
(caused by automated approach, aka sed) and some more severe isues along with
it. First reason to revert is the inconsistency with libvirt library.
Although we deal with the daemon directly rather than with a specific
hypervisor, we still do have a connection. That being said, contributors might
get under the impression that AdmDaemonNew would spawn/start a new daemon
(since it's admin API, why not...), or AdmDaemonClose would do the exact
opposite or they might expect DaemonIsAlive report overall status of the daemon
which definitely isn't the case.
The second reason to revert this patch is renaming virt-admin client. The
client tool does not necessarily have to reflect the names of the API's it's
using in his internals. An example would be 's/vshAdmConnect/vshAdmDaemon'
where noone can be certain of what the latter function really does. The former
is quite expressive about some connection magic it performs, but the latter does
not say anything, especially when vshAdmReconnect and vshAdmDisconnect were
left untouched.
https://bugzilla.redhat.com/show_bug.cgi?id=830056
Add flags handling to the virStoragePoolCreate and virStoragePoolCreateXML
API's which will allow the caller to provide the capability for the storage
pool create API's to also perform a pool build during creation rather than
requiring the additional buildPool step. This will allow transient pools
to be defined, built, and started.
The new flags are:
* VIR_STORAGE_POOL_CREATE_WITH_BUILD
Perform buildPool without any flags passed.
* VIR_STORAGE_POOL_CREATE_WITH_BUILD_OVERWRITE
Perform buildPool using VIR_STORAGE_POOL_BUILD_OVERWRITE flag.
* VIR_STORAGE_POOL_CREATE_WITH_BUILD_NO_OVERWRITE
Perform buildPool using VIR_STORAGE_POOL_BUILD_NO_OVERWRITE flag.
It is up to the backend to handle the processing of build flags. The
overwrite and no-overwrite flags are mutually exclusive.
NB:
This patch is loosely based upon code originally authored by Osier
Yang that were not reviewed and pushed, see:
https://www.redhat.com/archives/libvir-list/2012-July/msg01328.html
virAdmConnect was named after virConnect, but after some discussions,
most of the APIs called will be working with remote daemon and starting
them virAdmDaemon will make more sense. Only possibly controversal name
is CloseCallback (de)registration, and connecting to the daemon (which
will still be Open/Close), but even this makes sense if one thinks about
the daemon being opened and closed, e.g. as file, etc.
This way all the APIs working with the daemon will start with
virAdmDaemon prefix, they will accept virAdmDaemonPtr as first parameter
and that will better suit with other namings as well (virDomain*,
virAdmServer*, etc.).
Because in virt-admin, the connection name does not refer to a struct
that would have a connect in its name, also adjust 'connname' in
clients. And because it is not used anywhere in the vsh code, move it
from there into each client.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Introduce a new API to get libvirt version. It is worth noting, that
libvirt-admin and libvirt share the same version number. Unfortunately,
our existing API isn't generic enough to be used with virAdmConnectPtr
as well. Also this patch wires up this API to the virt-admin client
as a generic cmdVersion command.
As we need a client disconnect handler, we also need a mechanism to register
such handlers for a client. This patch introduced both the close callbacks and
also the client vshAdmCatchDisconnect handler to be registered with it. By
registering the handler we still need to make sure the client can react to
daemon's events like disconnect or keepalive, so asynchronous I/O event polling
is necessary to be enabled too.
Since most of our APIs rely on an acive functional connection to a daemon and
we have such a mechanism in libvirt already, there's need to have such a way in
libvirt-admin as well. By introducing a new public API, this patch provides
support to check for an active connection.
Unfortunately, client side version retrieval API virGetVersion uses
one-time initialization (due to the fact we might not have initialized the
library by calling connect prior to this) which is not completely compatible
with admin initialization. This API is rather simplistic and reimplementing
it for admin might be the preferred method of reusing it. Note that even though
the method will be reimplemented, the version number is still the same for both
the libvirt and libvirt-admin library.
As it turned out, we need to share some enums and declarations between
libvirt.h and libvirt-admin.h, but since our policy forbids direct includes of
libvirt*.h, there has to be some header exempt from this rule. This patch moves
the relevant part of code from libvirt.h.in to libvirt-common.h.in. Moreover,
since there is no need to have libvirt.h generated anymore, introduce a new
header libvirt.h which was previosly ignored from git and make the common
header ignored and generated instead.
Copy the virtlockd codebase across to form the initial virlogd
code. Simple search & replace of s/lock/log/ and gut the remote
protocol & dispatcher. This gives us a daemon that starts up
and listens for connections, but does nothing with them.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When a RBD volume has snapshots it can not be removed.
This patch introduces a new flag to force volume removal,
VIR_STORAGE_VOL_DELETE_WITH_SNAPSHOTS.
With this flag any existing snapshots will be removed prior to
removing the volume.
No existing mechanism in libvirt allowed us to pass such information,
so that's why a new flag was introduced.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Also, among with this new API new ACL that restricts rename
capability is invented too.
Signed-off-by: Tomas Meszaros <exo@tty.sk>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is a public library, it shouldn't include anything that is
internal. Including the library in it's current state to an example
application fails the preprocessor phase.
virDomainMigrateFinish* APIs were unfortunately designed to return the
pointer to the domain on destination and NULL on error. This looks OK in
normal cases but the same API is also called when we know migration
failed and thus we expect Finish to return NULL even if it actually did
all it was supposed to do without any error. The call is defined to
return nonnull domain pointer over RPC, which means returning NULL will
always result in an error being send. If this was not in fact an error,
the API itself wouldn't set anything to the thread local virError, which
makes the RPC layer come up with it's own "Library function returned
error but did not set virError" error.
This is quite confusing and also hard to detect by the caller. This
patch adds a special error code which can be used to check that Finish
successfully aborted migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Don't listen on the admin socket in the daemon and comment out the
admin devel files out of specfile.
Library is still being compiled and installed in order to link easily
without any disturbing modifications to the daemon code.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch provides support for a new watchdog action "inject-nmi" which
allows to define an inject of a non-maskable interrupt into a guest.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1203032
Implement a `migrate_disks' parameters for the QEMU driver. This multi-
value parameter can be used to explicitly specify what block devices
are to be migrated using the NBD server. Tunnelled migration using NBD
is to be done.
Signed-off-by: Pavel Boldin <pboldin@mirantis.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The `virTypedParamsAddStringList' function provides interface to add a
NULL-terminated array of string values as a multi-value to the params.
Signed-off-by: Pavel Boldin <pboldin@mirantis.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Just one of the simplest functions that returns string "Clients: X"
where X is the number of connected clients to daemon's first
subserver (the original one), so it can be tested using virsh, ipython,
etc.
The subserver is gathered by incrementing its reference
counter (similarly to getting qemu capabilities), so there is no
deadlock with admin subserver in this API.
Here you can see how functions should be named in the client (virAdm*)
and server (adm*).
There is also a parameter @flags that must be 0, which helps testing
proper error propagation into the client.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Initial scratch of the admin library. It has its own virAdmConnectPtr
that inherits from virAbstractConnectPtr and thus trivially supports
error reporting.
There's pkg-config file added and spec-file adjusted as well.
Since the library should be "minimalistic" and not depend on any other
library, the list of files is especially crafted for it. Most of them
could've been put to it's own sub-libraries that would be LIBADD'd to
libvirt_util, libvirt_net_rpc and libvirt_setuid_rpc_client to minimize
the number of object files being built, but that's a refactoring that
isn't the orginal aim of this commit.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
For setting passwords of users inside the domain.
With the VIR_DOMAIN_PASSWORD_ENCRYPTED flag set, the password
is assumed to be already encrypted by the method required
by the guest OS.
https://bugzilla.redhat.com/show_bug.cgi?id=1174177
On the s/390x architecture, libvirt may already return 0 in the
node_info->mhz field (see src/nodeinfo.c:linuxNodeInfoCPUPopulate).
We may also want to return this on aarch64 in future, because
calculating the proper value requires SMBIOS, which is not available
on non-server-class systems (specifically on systems which don't
adhere to the SBSA standard).
Therefore this change documents the existing behaviour and provides a
valid path for aarch64.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Bug-URL: https://bugzilla.redhat.com/1206353
virDomainGetJobStats is able to report statistics of a completed
migration, however to get usable downtime and total time statistics both
hosts have to keep synchronized time. To provide at least some
estimation of the times even when NTP daemons are not running on both
hosts we can just ignore the time needed to transfer a migration cookie
to the destination host. The result will be also inaccurate but a bit
more predictable. The total/down time will just be at least what we
report.
https://bugzilla.redhat.com/show_bug.cgi?id=1213434
When we shutdown/reboot a guest using agent-mode, if the guest itself blocks infinitely,
libvirt would block in qemuAgentShutdown() forever.
Thus, we set a timeout for shutdown/reboot, from our experience, 60 seconds would be fine.
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Each thread can use a thread local variable to keep the name of a job
which is currently running in the job.
The virThreadJobSetWorker API is supposed to be called once by any
thread which is used as a worker, i.e., it is waiting in a pool, woken
up to do a job, and returned back to the pool.
The virThreadJobSet/virThreadJobClear APIs are to be called at the
beginning/end of each job.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Wikipedia's list of common misspellings [1] has a machine-readable
version. This patch fixes those misspellings mentioned in the list
which don't have multiple right variants (as e.g. "accension", which can
be both "accession" and "ascension"), such misspellings are left
untouched. The list of changes was manually re-checked for false
positives.
[1] https://en.wikipedia.org/wiki/Wikipedia:Lists_of_common_misspellings/For_machines
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When libvirt is starting a domain, it reports the state as SHUTOFF until
it's RUNNING. This is not ideal because domain startup may take a long
time (usually because of some configuration issues, firewalls blocking
access to network disks, etc.) and domain lists provided by libvirt look
awkward. One can see weird shutoff domains with IDs in a list of active
domains or even shutoff transient domains. In any case, it looks more
like a bug in libvirt than a normal state a domain goes through.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Not all NICs (esp. the virtual ones like TUN) must have a hardware
address. Teach our RPC that it's possible.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Define helper function virDomainInterfaceFree, which allows
the upper layer application to free the domain interface object
conveniently.
The API is going to provide multiple methods by flags, e.g.
* Query guest agent
* Parse DHCP lease file
include/libvirt/libvirt-domain.h
* Define virDomainInterfaceAddresses, virDomainInterfaceFree
* Define structs virDomainInterface, virDomainIPAddress
src/driver-hypervisor.h:
* Define domainInterfaceAddresses
src/libvirt-domain.c:
* Implement virDomainInterfaceAddresses
* Implement virDomainInterfaceFree
src/libvirt_public.syms:
* Export the new symbols
Signed-off-by: Nehal J Wani <nehaljw.kkd1@gmail.com>
Add virDomainPinIOThread to allow setting the CPU affinity for a specific
IOThread based on the output generated from virDomainGetIOThreadsInfo
The API supports updating both the --live domain and the --config data
Add virDomainGetIOThreadInfo in order to return a list of
virDomainIOThreadInfoPtr structures which list the IOThread ID
and the CPU Affinity map for each IOThread for the domain.
For an active domain, the live data will be returned, while for
an inactive domain, the config data will be returned.
The API supports either the --live or --config flag, but not both.
Also added virDomainIOThreadsInfoFree in order to free the cpumap
and the IOThreadInfo structure.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Previously when a domain would get stuck in a domain job due to a
programming mistake we'd report the following control state:
$ virsh domcontrol domain
occupied (1424343406.150s)
The timestamp is invalid as the monitor was not entered for that domain.
We can use that to detect that the domain has an active job and report a
better error instead:
$ virsh domcontrol domain
error: internal (locking) error
When creating a RAW file, we don't take advantage
of clone of btrfs.
Add a VIR_STORAGE_VOL_CREATE_REFLINK flag to request
a reflink copy.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The virDomainDefineXMLFlags and virDomainCreateXML APIs both
gain new flags allowing them to be told to validate XML.
This updates all the drivers to turn on validation in the
XML parser when the flags are set
The virDomainDefineXML method is one of the few that still lacks
an 'unsigned int flags' parameter. This will be needed for adding
XML validation to this API. virDomainCreateXML fortunately already
has flags.
The members of struct virSecurityLabel and struct virSecurityModel
were not shown in the libvirt API docs because the corresponding
<field> elements were missing from the libvirt-api.xml.
The reason is that apibuild.py does not cope well with typedef's
using inline struct definitions. It fails to associate the comment
with the typedef and because of this refuses to write out the
field of the struct.
This patch introduces access to allocation information about
a backing chain of a live domain. While querying storage
volumes for read-only disks could provide some of the details,
we do NOT want to read() a file while qemu is writing it.
Also, there is one case where we have to rely on qemu: when
doing a block commit into a backing file, where that file is
stored in qcow2 format on a host block device, we want to know
the current highest write offset into that image, in order to
know if the disk must be resized larger. qemu-img does not
(currently) show this information, and none of the earlier
block APIs were extensible enough to expose it. But
virDomainListGetStats is perfect for the job!
We don't need a new group of statistics, as the existing block
group is sufficient. On the other hand, as existing libvirt
releases already report 1:1 mapping of block.count to <disk>
devices, changing the array size could confuse older clients;
and even with newer clients, the time and memory taken to
report additional statistics is not always necessary (backing
files are generally read-only except for block-commit, so while
read statistics may change, sizing statistics will not). So
the choice here is to add a new flag that only newer callers
will pass, when they are prepared for the additional information.
This patch introduces the new API, but it will take more
patches to get it implemented for qemu.
* include/libvirt/libvirt-domain.h
(VIR_CONNECT_GET_ALL_DOMAINS_STATS_BACKING): New flag.
* src/libvirt-domain.c (virConnectGetAllDomainStats): Document it,
and add a new field when it is in use.
* tools/virsh-domain-monitor.c (cmdDomstats): Use new flag.
* tools/virsh.pod (domstats): Document it.
Signed-off-by: Eric Blake <eblake@redhat.com>
The documentation for virDomainBlockInfo was confusing: it stated
that 'physical' was the size of the container, then gave an example
of it being the amount of storage used by a sparse file (that is,
for a sparse raw image on a regular file, the wording implied
capacity==physical, while allocation was smaller; but the example
instead claimed physical==allocation). Since we use 'physical' for
the last offset of a block device, we should do likewise for
regular files.
Furthermore, the example claimed that for a qcow2 regular file,
allocation==physical. At the time the code was first written,
this was true (qcow2 files were allocated sequentially, and were
never sparse, so the last sector written happened to also match
the disk space occupied); but modern qemu does much better and
can punch holes for a qcow2 with allocation < physical.
Basically, after this patch, the three fields are now reliably
mapped as:
'capacity' - how much storage the guest can see (equal to
physical for raw images, determined by image metadata otherwise)
'allocation' - how much storage the image occupies (similar to
what 'du' would report)
'physical' - the last offset of the image (similar to what 'ls'
would report)
'capacity' can be larger than 'physical' (such as for a qcow2
image that does not vary much from a backing file) or smaller
(such as for a qcow2 file with lots of internal snapshots).
Likewise, 'allocation' can be (slightly) larger than 'physical'
(such as counting the tail of cluster allocations required to
round a file size up to filesystem granularity) or smaller
(for a sparse file). A block-resize operation changes capacity
(which, for raw images, also changes physical); many non-raw
images automatically grow physical and allocation as necessary
when starting with an allocation smaller than capacity; and even
when capacity and physical stay unchanged, allocation can change
when converting sectors from holes to data or back.
Note that this does not change semantics for qcow2 images stored
on block devices; there, we still rely on qemu to report the
highest written extent for allocation. So using this API to
track when to extend a block device because a qcow2 image is
about to exceed a threshold will not see any changes.
Also, note that virStorageVolInfo is unfortunately limited to
just 'capacity' and 'allocation' (we can't expand it to add
'physical', although we can expand the XML to add it there);
historically, that struct's 'allocation' value has reported
file size for qcow2 files (what this patch terms 'physical'
for a domain block device), but disk usage for raw files (what
this patch terms 'allocation'). So follow-up patches will be
needed to make storage volumes report the same allocation
values and get at physical values, where those differ.
* include/libvirt/libvirt-domain.h (_virDomainBlockInfo): Tweak
documentation to match saner definition.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): For regular
files, physical size is capacity, not allocation.
Signed-off-by: Eric Blake <eblake@redhat.com>
The apibuild.py script did not handle whitespace in preprocessor
macros, so it failed to detect constants declared with '# define'
instead of '#define'. Since we now correctly indent our public
header files, we have silently lost all constants from
libvirt-api.xml. This also caused us to not detect formatting
errors in constant docs
This changes the display from:
libvirt-storage: APIs for management of storages
to
libvirt-storage: APIs for management of storage pools and volumes
In making that change I expected my build tree html output to be
regenerated; however, it wasn't because the dependency for the separated
libvirt-storage.h wasn't there. It was only present for libvirt.h.in
So I added each in the order displayed on the docs/html/index.html page
virDomainGetFSInfo returns a list of filesystems information mounted in the
guest, which contains mountpoints, device names, filesystem types, and
device aliases named by libvirt. This will be useful, for example, to
specify mountpoints to fsfreeze when taking snapshot of a part of disks.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
As qemu is now able to notify us about change of the channel state used
for communication with the guest agent we now can more precisely track
the state of the guest agent.
To allow notifying management apps this patch implements a new event
that will be triggered on changes of the guest agent state.
Add support for bps_max and friends in the driver part.
In the part checking if a qemu is running, check if the running binary
support bps_max, if not print an error message, if yes add it to
"info" variable
Signed-off-by: Matthias Gatto <matthias.gatto@outscale.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The cfg.mk rule for checking preprocessor indentation was
mistakenly missing the libvirt.h.in file due to bad file
extension matching rule. Fix that and the resolve the
incorrect indentation that is identified.
Create a new libvirt-host.h file to hold the public
API definitions for the virConnect type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-domain.h file to hold the public
API definitions for the virDomain type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-event.h file to hold the public
API definitions for the virEvent type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-storage.h file to hold the public
API definitions for the virStorage/Vol type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-stream.h file to hold the public
API definitions for the virStream type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Note the definition of virStreamPtr is not moved, since that
must be declared early for all other libvirt APIs to be able
to reference it.
Create a new libvirt-secret.h file to hold the public
API definitions for the virSecret type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-nodedev.h file to hold the public
API definitions for the virNodeDevice type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-nwfilter.h file to hold the public
API definitions for the virNWFilter type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-interface.h file to hold the public
API definitions for the virInterface type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-network.h file to hold the public
API definitions for the virNetwork type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-domain-snapshot.h file to hold the public
API definitions for the virDomainSnapshot type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Aeons ago (commit 34dcbbb4, v0.8.2), we added a new libvirt event
(VIR_DOMAIN_EVENT_ID_IO_ERROR_REASON) in order to tell the user WHY
the guest halted. This is because at least VDSM wants to react
differently to ENOSPC events (resize the lvm partition to be larger,
and resume the guest as if nothing had happened) from all other events
(I/O is hosed, throw up our hands and flag things as broken). At the
time this was done, downstream RHEL qemu added a vendor extension
'__com.redhat_reason', which would be exactly one of these strings:
"enospc", "eperm", "eio", and "eother". In our stupidity, we exposed
those exact strings to clients, rather than an enum, and we also
return "" if we did not have access to a reason (which was the case
for upstream qemu).
Fast forward to now: upstream qemu commit c7c2ff0c (will be qemu 2.2)
FINALLY adds a 'nospace' boolean, after discussion with multiple
projects determined that VDSM really doesn't care about distinction
between any other error types. So this patch converts 'nospace' into
the string "enospc" for compatibility with RHEL clients that were
already used to the downstream extension, while leaving the reason
blank for all other cases (no change from the status quo).
See also https://bugzilla.redhat.com/show_bug.cgi?id=1119784
* src/qemu/qemu_monitor_json.c (qewmuMonitorJSONHandleIOError):
Parse reason field from modern qemu.
* include/libvirt/libvirt.h.in
(virConnectDomainEventIOErrorReasonCallback): Document it.
Signed-off-by: Eric Blake <eblake@redhat.com>
For the new VIR_DOMAIN_EVENT_ID_TUNABLE event we have a bunch of
constants added
VIR_DOMAIN_EVENT_CPUTUNE_<blah>
VIR_DOMAIN_EVENT_BLKDEVIOTUNE_<blah>
This naming convention is bad for two reasons
- There is no common prefix unique for the events to both
relate them, and distinguish them from other event
constants
- The values associated with the constants were chosen
to match the names used with virConnectGetAllDomainStats
so having EVENT in the constant name is not applicable in
that respect
This patch proposes renaming the constants to
VIR_DOMAIN_TUNABLE_CPU_<blah>
VIR_DOMAIN_TUNABLE_BLKDEV_<blah>
ie, given them a common VIR_DOMAIN_TUNABLE prefix.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Use the universal tunable event to report changes to user. All
blkdeviotune values are prefixed with "blkdeviotune".
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
A long time ago in a galaxy far, far away it has been decided
that libvirt will manage not only domains but host as well. And
with my latest work on qemu driver supporting huge pages, we miss
the cherry on top: an API to allocate huge pages on the run.
Currently users are forced to log into the host and adjust the
huge pages pool themselves. However, with this API the problem
is gone - they can both size up and size down the pool.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There are now two places in libvirt which use polkit. Currently
they use pkexec, which is set to be replaced by direct DBus API
calls. Add a common API which they will both be able to use for
this purpose.
No tests are added at this time, since the impl will be gutted
in favour of a DBus API call shortly.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Now we have universal tunable event so we can use it for reporting
changes to user. The cputune values will be prefixed with "cputune" to
distinguish it from other tunable events.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This new event will use typedParameters to expose what has been actually
updated and the reason is that we can in the future extend any tunable
values or add new tunable values. With typedParameters we don't have to
worry about creating some other events, we will just use this universal
event to inform user about updates.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
RDMA Live migration requires registering memory with the hardware, and
thus QEMU offers a new 'capability' to pre-register / mlock() the guest
memory in advance for higher RDMA performance before the migration
begins. This capability is disabled by default, which means QEMU will
register the memory with the hardware in an on-demand basis.
This patch exposes this capability with the following example usage:
virsh migrate --live --rdma-pin-all --migrateuri rdma://hostname domain qemu+ssh://hostname/system
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
RDMA migration uses the 'setup' state in QEMU to optionally lock
all memory before the migration starts. The total time spent in
this state is exposed as VIR_DOMAIN_JOB_SETUP_TIME.
Additionally, QEMU also exports migration throughput (mbps) for both
memory and disk, so let's add them too: VIR_DOMAIN_JOB_MEMORY_BPS,
VIR_DOMAIN_JOB_DISK_BPS.
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This patch implements the VIR_DOMAIN_STATS_BLOCK group of statistics.
To do so, a helper function to get the block stats of all the disks of
a domain is added.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This patch implements the VIR_DOMAIN_STATS_INTERFACE group of
statistics.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This patch implements the VIR_DOMAIN_STATS_VCPU group of statistics. To
do so, this patch also extracts a helper to gather the vCPU information.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This patch implements the VIR_DOMAIN_STATS_CPU_TOTAL group of
statistics.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
We stupidly modeled block job bandwidth after migration
bandwidth, which in turn was an 'unsigned long' and therefore
subject to 32-bit vs. 64-bit interpretations. To work around
the fact that 10-gigabit interfaces are possible but don't fit
within 32 bits, the original interface took the number scaled
as MiB/sec. But this scaling is rather coarse, and it might
be nice to tune bandwidth finer than in megabyte chunks.
Several of the block job calls that can set speed are fed
through a common interface, so it was easier to adjust them all
at once. Note that there is intentionally no flag for the new
virDomainBlockCopy; there, since the API already uses a 64-bit
type always, instead of a possible 32-bit type, and is brand
new, it was easier to just avoid scaling issues. As with the
previous patch that adjusted the query side (commit db33cc24),
omitting the new flag preserves old behavior, and the
documentation now mentions limits of what happens when a 32-bit
machine is on either client or server side.
* include/libvirt/libvirt.h.in (virDomainBlockJobSetSpeedFlags)
(virDomainBlockPullFlags)
(VIR_DOMAIN_BLOCK_REBASE_BANDWIDTH_BYTES)
(VIR_DOMAIN_BLOCK_COMMIT_BANDWIDTH_BYTES): New enums.
* src/libvirt.c (virDomainBlockJobSetSpeed, virDomainBlockPull)
(virDomainBlockRebase, virDomainBlockCommit): Document them.
* src/qemu/qemu_driver.c (qemuDomainBlockJobSetSpeed)
(qemuDomainBlockPull, qemuDomainBlockRebase)
(qemuDomainBlockCommit, qemuDomainBlockJobImpl): Support new flag.
Signed-off-by: Eric Blake <eblake@redhat.com>
When a domain is undefined, there are options to remove it's
managed save state or snapshots. However, there's another file
that libvirt creates per domain: the NVRAM variable store file.
Make sure that the file is not left behind if the domain is
undefined.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
virDomainGetJobStats gains new VIR_DOMAIN_JOB_STATS_COMPLETED flag that
can be used to fetch statistics of a completed job rather than a
currently running job.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
To date, anyone performing a block copy and pivot ends up with
the destination being treated as <disk type='file'>. While this
works for data access for a block device, it has at least one
noticeable shortcoming: virDomainGetBlockInfo() reports allocation
differently for block devices visited as files (the size of the
device) than for block devices visited as <disk type='block'>
(the maximum sector used, as reported by qemu); and this difference
is significant when trying to manage qcow2 format on block devices
that can be grown as needed.
Of course, the more powerful virDomainBlockCopy() API can already
express the ability to set the <disk> type. But a new API can't
be backported, while a new flag to an existing API can; and it is
also rather inconvenient to have to resort to the full power of
generating XML when just adding a flag to the older call will do
the trick. So this patch enhances blockcopy to let the user flag
when the resulting XML after the copy must list the device as
type='block'.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_REBASE_COPY_DEV):
New flag.
* src/libvirt.c (virDomainBlockRebase): Document it.
* tools/virsh-domain.c (opts_block_copy, blockJobImpl): Add
--blockdev option.
* tools/virsh.pod (blockcopy): Document it.
* src/qemu/qemu_driver.c (qemuDomainBlockRebase): Allow new flag.
(qemuDomainBlockCopy): Remember the flag, and make sure it is only
used on actual block devices.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
While reviewing the new virDomainBlockCopy API, Peter Krempa
pointed out that our existing design of using MiB/s for block
job bandwidth is rather coarse, especially since qemu tracks
it in bytes/s; so virDomainBlockCopy only accepts bytes/s.
But once the new API is implemented for qemu, we will be in
the situation where it is possible to set a value that cannot
be accurately reflected back to the user, because the existing
virDomainGetBlockJobInfo defaults to the coarser units.
Fortunately, we have an escape hatch; and one that has already
served us well in the past: we can use the flags argument to
specify which scale to use (see virDomainBlockResize for prior
art). This patch fixes the query side of the API; made easier
by previous patches that split the query side out from the
modification code. Later patches will address the virsh
interface, as well retrofitting all other blockjob APIs to
also accept a flag for toggling bandwidth units.
* include/libvirt/libvirt.h.in (_virDomainBlockJobInfo)
(VIR_DOMAIN_BLOCK_COPY_BANDWIDTH): Document sizing issues.
(virDomainBlockJobInfoFlags): New enum.
* src/libvirt.c (virDomainGetBlockJobInfo): Document new flag.
* src/qemu/qemu_monitor.h (qemuMonitorBlockJobInfo): Add parameter.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJobInfo): Likewise.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockJobInfo):
Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockJobInfo)
(qemuMonitorJSONGetBlockJobInfoOne): Likewise. Don't scale here.
* src/qemu/qemu_migration.c (qemuMigrationDriveMirror): Update
callers.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl): Likewise.
(qemuDomainGetBlockJobInfo): Likewise, and support new flag.
Signed-off-by: Eric Blake <eblake@redhat.com>
While qemu definitely caps granularity to 64 MiB, it places no
limits on buf-size. On a machine beefy enough for lots of
memory, a buf-size larger than 2 GiB is feasible, so we should
pass a 64-bit parameter.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_COPY_BUF_SIZE):
Allow 64 bits.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Let's fix this before we bake in a painful API. Since we know
that we have exactly one non-negative fd on success, we might
as well return the fd directly instead of forcing the user to
pass in a pointer. Furthermore, I found some memory and fd
leaks while reviewing the code - the idea is that on success,
libvirtd will have handed two fds in two different directions:
one to qemu, and one to the RPC client.
* include/libvirt/libvirt.h.in (virDomainOpenGraphicsFD): Drop
unneeded parameter.
* src/driver.h (virDrvDomainOpenGraphicsFD): Likewise.
* src/libvirt.c (virDomainOpenGraphicsFD): Adjust interface to
return fd directly.
* daemon/remote.c (remoteDispatchDomainOpenGraphicsFd): Adjust
semantics.
* src/qemu/qemu_driver.c (qemuDomainOpenGraphicsFD): Likewise,
and plug fd leak.
* src/remote/remote_driver.c (remoteDomainOpenGraphicsFD):
Likewise, and plug memory and fd leak.
Signed-off-by: Eric Blake <eblake@redhat.com>
This commit (finally) adds the virDomainBlockCopy API, with the
intent that it will provide more power to the existing 'virsh
blockcopy' command.
'virsh blockcopy' was first added in Apr 2012 (v0.9.12), which
corresponds to the upstream qemu 1.2 timeframe. It was done as
a hack on top of the existing virDomainBlockRebase() API call,
for two reasons: 1) it was targetting a feature that landed first
in downstream RHEL qemu, but had not stabilized in upstream qemu
at the time (and indeed, 'drive-mirror' only landed upstream in
qemu 1.3 with slight differences to the first RHEL attempt,
and later gained further parameters like granularity and buf-size
that are also worth exposing), and 2) extending an existing API
allowed it to be backported without worrying about bumping .so
versions. A virDomainBlockCopy() API was proposed at that time
[1], but we decided not to accept it into libvirt until after
upstream qemu stabilized, and it ended up getting scrapped.
Whether or not RHEL should have attempted adding a new feature
without getting it upstream first is a debate that can be held
another day; but enough time has now elapsed that we are ready to
do the interface cleanly.
[1] https://www.redhat.com/archives/libvir-list/2012-April/msg00768.html
Delaying the creation of a clean API until now has also had a
benefit: we've only recently learned of a few shortcomings in the
original design: 1) it is unable to target a network destination
(such as a gluster volume) because it hard-coded the assumption
that the destination is a local file name. Because of all the
refactoring we've done to add virStorageSourcePtr, we are in a
better position to declare an API that parses XML describing a
host storage source as the copy destination, which was not
possible had we implemented virDomainBlockCopy as it had been
originally envisioned (although a network target will have to wait
until a later libvirt release compared to the API addition to
actually be implemented). 2) the design of using MiB/sec as the
bandwidth throttle is rather coarse; qemu is actually tuned to
bytes/second, and libvirt is preventing access to that level of
detail. A later patch will add flags to existing block job API
that can request bytes/second instead of back-compat MiB/s, but as
this is a new API, we can get it right to begin with.
At least I had the foresight to create 'virsh blockcopy' as a
separate command at the UI level (commit 1f06c00) rather than
leaking the underlying API overload of virDomainBlockRebase onto
shell users.
A further note on the bandwidth option: virTypedParameters
intentionally lacks unsigned long (since variable-width
interaction between mixed 32- vs. 64-bit client/server setups is
nasty), but we have to deal with the fact that we are interacting
with existing older code that mistakenly chose unsigned long
bandwidth at a point before we decided to prohibit it in all new
API. The typed parameter is therefore unsigned long long, but
the implementation (in a later patch) will have to do overflow
detection on 32-bit platforms, as well as capping the value to
match the LLONG_MAX>>20 cap of the existing MiB/s interfaces.
* include/libvirt/libvirt.h.in (virDomainBlockCopy): New API.
(virDomainBlockJobType, virConnectDomainEventBlockJobStatus):
Update related documentation.
* src/libvirt.c (virDomainBlockCopy): Implement it.
* src/libvirt_public.syms (LIBVIRT_1.2.8): Export it.
* src/driver.h (_virDriver): New driver callback.
Signed-off-by: Eric Blake <eblake@redhat.com>
The motivation for this API is that management layers that use libvirt
usually poll for statistics using various split up APIs we currently
provide. To get all the necessary stuff, the app needs to issue a lot of
calls and aggregate the results.
The APIs I'm introducing here:
1) Returns data in a format that we can expand in the future and is
(pseudo) hierarchical. The data is returned as typed parameters where
the fields are constructed as dot-separated strings containing names and
other stuff in a list of typed params.
2) Stats for multiple (all) domains can be queried at once and are
returned in one call. This will decrease the overhead necessary to issue
multiple calls per domain multiplied by the count of domains.
3) Selectable (bit mask) fields in the returned format. This will allow
to retrieve only specific stats according to the app's need.
The stats groups will be enabled using a bit field @stats passed as the
function argument. A few sample stats groups that this API will support:
VIR_DOMAIN_STATS_STATE
VIR_DOMAIN_STATS_CPU
VIR_DOMAIN_STATS_BLOCK
VIR_DOMAIN_STATS_INTERFACE
(Note that this is only an example, the initial implementation supports
only VIR_DOMAIN_STATS_STATE while others will be added later.)
the returned typed params will use the following scheme
state.state = VIR_DOMAIN_RUNNING
state.reason = VIR_DOMAIN_RUNNING_BOOTED (the actual values according to
the enum)
cpu.count = 8
cpu.0.state = running
cpu.0.time = 1234
Implement ZFS storage backend driver. Currently supported
only on FreeBSD because of ZFS limitations on Linux.
Features supported:
- pool-start, pool-stop
- pool-info
- vol-list
- vol-create / vol-delete
Pool definition looks like that:
<pool type='zfs'>
<name>myzfspool</name>
<source>
<name>actualpoolname</name>
</source>
</pool>
The 'actualpoolname' value is a name of the pool on the system,
such as shown by 'zpool list' command. Target makes no sense
here because volumes path is always /dev/zvol/$poolname/$volname.
User has to create a pool on his own, this driver doesn't
support pool creation currently.
A volume could be used with Qemu by adding an entry like this:
<disk type='volume' device='disk'>
<driver name='qemu' type='raw'/>
<source pool='myzfspool' volume='vol5'/>
<target dev='hdc' bus='ide'/>
</disk>
Introduce flag for the block rebase API to allow the rebase operation to
leave the chain relatively addressed. Also adds a virsh switch to enable
this behavior.
Introduce flag for the block commit API to allow the commit operation to
leave the chain relatively addressed. Also adds a virsh switch to enable
this behavior.
Instead of maintaining two very similar APIs, add the "@mac" parameter
to virNetworkGetDHCPLeases and kill virNetworkGetDHCPLeasesForMAC. Both
of those functions would return data the same way, so making @mac an
optional filter simplifies a lot of stuff.
The new VIR_CONNECT_COMPARE_CPU_FAIL_INCOMPATIBLE flag for
virConnectCompareCPU can be used to get an error
(VIR_ERR_CPU_INCOMPATIBLE) describing the incompatibility instead of the
usual VIR_CPU_COMPARE_INCOMPATIBLE return code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When CPU comparison APIs return VIR_CPU_COMPARE_INCOMPATIBLE, the caller
has no clue why the CPU is considered incompatible with host CPU. And in
some cases, it would be nice to be able to get such info in a client
rather than having to look in logs.
To achieve this, the APIs can be told to return VIR_ERR_CPU_INCOMPATIBLE
error for incompatible CPUs and the reason will be described in the
associated error message.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Only types and macros are documented in libvirt.h, APIs are documented
in the *.c file they are implemented in.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Introduce 3 new APIs, virNetworkGetDHCPLeases, virNetworkGetDHCPLeasesForMAC
and virNetworkDHCPLeaseFree.
* virNetworkGetDHCPLeases: returns the dhcp leases information for a given
virtual network.
For DHCPv4, the information returned:
- Network Interface Name
- Expiry Time
- MAC address
- IAID (NULL)
- IPv4 address (with type and prefix)
- Hostname (can be NULL)
- Client ID (can be NULL)
For DHCPv6, the information returned:
- Network Interface Name
- Expiry Time
- MAC address
- IAID (can be NULL, only in rare cases)
- IPv6 address (with type and prefix)
- Hostname (can be NULL)
- Client DUID
Note: @mac, @iaid, @ipaddr, @clientid are in ASCII form, not raw bytes.
Note: @expirytime can 0, in case the lease is for infinite time.
* virNetworkGetDHCPLeasesForMAC: returns the dhcp leases information for a
given virtual network and specified MAC Address.
* virNetworkDHCPLeaseFree: allows the upper layer application to free the
network interface object conveniently.
There is no support for flags, so user is expected to pass 0 for
both the APIs.
include/libvirt/libvirt.h.in:
* Define virNetworkGetDHCPLeases
* Define virNetworkGetDHCPLeasesForMAC
* Define virNetworkDHCPLeaseFree
src/driver.h:
* Define networkGetDHCPLeases
* Define networkGetDHCPLeasesForMAC
src/libvirt.c:
* Implement virNetworkGetDHCPLeases
* Implement virNetworkGetDHCPLeasesForMAC
* Implement virNetworkDHCPLeaseFree
src/libvirt_public.syms:
* Export the new symbols
The aim of the API is to get information on number of free pages
on the system. The API behaves similar to the
virNodeGetCellsFreeMemory(). User passes starting NUMA cell, the
count of nodes that he's interested in, pages sizes (yes,
multiple sizes can be queried at once) and the counts are
returned in an array.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When the block job event was first added, it was for block pull,
where the active layer of the disk remains the same name. It was
also in a day where we only cared about local files, and so we
always had a canonical absolute file name. But two things have
changed since then: we now have network disks, where determining
a single absolute string does not really make sense; and we have
two-phase jobs (copy and active commit) where the name of the
active layer changes between the first event (ready, on the old
name) and second (complete, on the pivoted name).
Adam Litke reported that having an unstable string between events
makes life harder for clients. Furthermore, all of our API that
operate on a particular disk of a domain accept multiple strings:
not only the absolute name of the active layer, but also the
destination device name (such as 'vda'). As this latter name is
stable, even for network sources, it serves as a better string
to supply in block job events.
But backwards-compatibility demands that we should not change the
name handed to users unless they explicitly request it. Therefore,
this patch adds a new event, BLOCK_JOB_2 (alas, I couldn't think of
any nicer name - but at least Migrate2 and Migrate3 are precedent
for a number suffix). We must double up on emitting both old-style
and new-style events according to what clients have registered for
(see also how IOError and IOErrorReason emits double events, but
there the difference was a larger struct rather than changed
meaning of one of the struct members).
Unfortunately, adding a new event isn't something that can easily
be broken into pieces, so the commit is rather large.
* include/libvirt/libvirt.h.in (virDomainEventID): Add a new id
for VIR_DOMAIN_EVENT_ID_BLOCK_JOB_2.
(virConnectDomainEventBlockJobCallback): Document new semantics.
* src/conf/domain_event.c (_virDomainEventBlockJob): Rename field,
to ensure we catch all clients.
(virDomainEventBlockJobNew): Add parameter.
(virDomainEventBlockJobDispose)
(virDomainEventBlockJobNewFromObj)
(virDomainEventBlockJobNewFromDom)
(virDomainEventDispatchDefaultFunc): Adjust clients.
(virDomainEventBlockJob2NewFromObj)
(virDomainEventBlockJob2NewFromDom): New functions.
* src/conf/domain_event.h: Add new prototypes.
* src/libvirt_private.syms (domain_event.h): Export new functions.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Generate two
different events.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Likewise.
* src/remote/remote_protocol.x
(remote_domain_event_block_job_2_msg): New struct.
(REMOTE_PROC_DOMAIN_EVENT_BLOCK_JOB_2): New RPC.
* src/remote/remote_driver.c
(remoteDomainBuildEventBlockJob2): New handler.
(remoteEvents): Register new event.
* daemon/remote.c (remoteRelayDomainEventBlockJob2): New handler.
(domainEventCallbacks): Register new event.
* tools/virsh-domain.c (vshEventCallbacks): Likewise.
(vshEventBlockJobPrint): Adjust client.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
We have a policy of avoiding enum types in structs in our public
API, because it is possible for a client to choose compiler options
that can change the in-memory ABI of that struct based on whether
the enum value occupies an int or a minimal size. But we missed
this for virDomainBlockJobInfo. We got lucky on little-endian
machines - if the enum fits minimal size (a char), we still end
up padding to the next long before the next field; but on
big-endian, a client interpreting the enum as a char would always
see 0 when the server supplies contents as an int.
* include/libvirt/libvirt.h.in (virDomainBlockJobInfo): Enforce
particular sizing.
Signed-off-by: Eric Blake <eblake@redhat.com>
I noticed that the web page lacked documentation on block jobs:
http://libvirt.org/html/libvirt-libvirt.html#virDomainBlockJobType
not only for the recently added active commit, but also for all
the other job types.
* include/libvirt/libvirt.h.in (virDomainBlockJobType): Document
recent addition.
Signed-off-by: Eric Blake <eblake@redhat.com>
Now that qemu 2.0 allows commit of the active layer, people are
attempting to use virsh blockcommit and getting into a stuck
state, because libvirt is unprepared to handle the two-phase
commit required by qemu.
Stepping back a bit, there are two valid semantics for a
commit operation:
1. Maintain a 'golden' base, and a transient overlay. Make
changes in the overlay, and if everything appears to work,
commit those changes into the base, but still keep the overlay
for the next round of changes; repeat the cycle as desired.
2. Create an external snapshot, then back up the stable state
in the backing file. Once the backup is complete, commit the
overlay back into the base, and delete the temporary snapshot.
Since qemu doesn't know up front which of the two styles is
preferred, a block commit of the active layer merely gets
the job into a synchronized state, and sends an event; then
the user must either cancel (case 1) or complete (case 2),
where qemu then sends a second event that actually ends the
job. However, until commit e6bcbcd, libvirt was blindly
assuming the semantics that apply to a commit of an
intermediate image, where there is only one sane conclusion
(the job automatically ends with fewer elements in the chain);
and getting stuck because it wasn't prepared for qemu to enter
a second phase of the job.
This patch adds a flag to the libvirt API that a user MUST
supply in order to acknowledge that they will be using two-phase
semantics. It might be possible to have a mode where if the
flag is omitted, we automatically do the case 2 semantics on
the user's behalf; but before that happens, I must do additional
patches to track the fact that we are doing an active commit
in the domain XML. Later patches will add support of the flag,
and once 2-phase semantics are working, we can then decide
whether to relax things to allow an omitted flag to cause an
automatic pivot.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_COMMIT_ACTIVE)
(VIR_DOMAIN_BLOCK_JOB_TYPE_ACTIVE_COMMIT): New enums.
* src/libvirt.c (virDomainBlockCommit): Document two-phase job
when committing active layer, through new flag.
(virDomainBlockJobAbort): Document that pivot also occurs after
active commit.
* tools/virsh-domain.c (vshDomainBlockJob): Cover new job.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Explicitly
reject active copy; later patches will add it in.
Signed-off-by: Eric Blake <eblake@redhat.com>
These APIs allow users to get or set time in a domain, which may come
handy if the domain has been resumed just recently and NTP is not
configured or hasn't kicked in yet and the guest is running
something time critical. In addition, NTP may refuse to re-set the clock
if the skew is too big.
In addition, new ACL attribute is introduced 'set_time'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
These will freeze and thaw filesystems within guest specified by
@mountpoints parameters. The parameters can be NULL and 0, then all
mounted filesystems are frozen or thawed. @flags parameter, which are
currently not used, is for future extensions.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The network and nwfilter drivers both have a need to update
firewall rules. The currently share no code for interacting
with iptables / firewalld. The nwfilter driver is fairly
tied to the concept of creating shell scripts to execute
which makes it very hard to port to talk to firewalld via
DBus APIs.
This patch introduces a virFirewallPtr object which is able
to represent a complete sequence of rule changes, with the
ability to have multiple transactional checkpoints with
rollbacks. By formally separating the definition of the rules
to be applied from the mechanism used to apply them, it is
also possible to write a firewall engine that uses firewalld
DBus APIs natively instead of via the slow firewalld-cmd.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
--memory-only option is introduced without compression supported. Now qemu
has support for dumping domain's memory in kdump-compressed format. This
patch adds a new virDomainCoreDumpWithFormat API, so that the format in
which qemu dumps domain's memory can be specified.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Busy enterprise workloads hosted on large sized VM's tend to dirty
memory faster than the transfer rate achieved via live guest migration.
Despite some good recent improvements (& using dedicated 10Gig NICs
between hosts) the live migration may NOT converge.
Recently support was added in qemu (version 1.6) to allow a user to
choose if they wish to force convergence of their migration via a
new migration capability : "auto-converge". This feature allows for qemu
to auto-detect lack of convergence and trigger a throttle-down of the
VCPUs.
This patch includes the libvirt support needed to trigger this
feature. (Testing is in progress)
Signed-off-by: Chegu Vinod <chegu_vinod@hp.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When listening for a subset of monitor events, it can be tedious
to register for each event name in series; nicer is to register
for multiple events in one go. Implement a flag to use regex
interpretation of the event filter.
While at it, prove how much I hate the shift key, by adding a
way to filter for 'shutdown' instead of 'SHUTDOWN'. :)
* include/libvirt/libvirt-qemu.h
(virConnectDomainQemuMonitorEventRegisterFlags): New enum.
* src/libvirt-qemu.c (virConnectDomainQemuMonitorEventRegister):
Document flags.
* tools/virsh-domain.c (cmdQemuMonitorEvent): Expose them.
* tools/virsh.pod (qemu-monitor-event): Document this.
* src/conf/domain_event.c
(virDomainQemuMonitorEventStateRegisterID): Add flags.
(virDomainQemuMonitorEventFilter): Handle regex, and optimize
client side.
(virDomainQemuMonitorEventCleanup): Clean up regex.
Signed-off-by: Eric Blake <eblake@redhat.com>
Several times in the past, qemu has implemented a new event,
but libvirt has not yet caught up to reporting that event to
the user applications. While it is possible to track libvirt
logs to see that an unknown event was received and ignored,
it would be nicer to copy what 'virsh qemu-monitor-command'
does, and expose this information to the end developer as
one of our unsupported qemu-specific commands.
If you find yourself needing to use this API for more than
just development purposes, please ask on the libvirt list
for a supported counterpart event to be added in libvirt.so.
While the supported virConnectDomainEventRegisterAny() API
takes an id which determines the signature of the callback,
this version takes a string filter and always uses the same
signature. Furthermore, I chose to expose this as a new API
instead of trying to add a new eventID at the top level, in
part because the generic option lacks event name filtering,
and in part because the normal domain event namespace should
not be polluted by a qemu-only event. I also added a flags
argument; unused for now, but we might decide to use it to
allow a user to request event names by glob or regex instead
of literal match.
This API intentionally requires full write access (while
normal event registration is allowed on read-only clients);
this is in part due to the fact that it should only be used
by debugging situations, and in part because the design of
per-event filtering in later patches ended up allowing for
duplicate registrations that could potentially be abused to
exhaust server memory - requiring write privileges means
that such abuse will not serve as a denial of service attack
against users with higher privileges.
* include/libvirt/libvirt-qemu.h
(virConnectDomainQemuMonitorEventCallback)
(virConnectDomainQemuMonitorEventRegister)
(virConnectDomainQemuMonitorEventDeregister): New prototypes.
* src/libvirt-qemu.c (virConnectDomainQemuMonitorEventRegister)
(virConnectDomainQemuMonitorEventDeregister): New functions.
* src/libvirt_qemu.syms (LIBVIRT_QEMU_1.2.1): Export them.
* src/driver.h (virDrvConnectDomainQemuMonitorEventRegister)
(virDrvConnectDomainQemuMonitorEventDeregister): New callbacks.
Signed-off-by: Eric Blake <eblake@redhat.com>
GNULIB provides APIs for calculating md5 and sha256 hashes,
but these APIs only return you raw byte arrays. Most users
in libvirt want the hash in printable string format. Add
some helper APIs in util/vircrypto.{c,h} for doing this.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
At this point it has a limited functionality and is highly
experimental. Supported domain operations are:
* define
* start
* destroy
* dumpxml
* dominfo
It's only possible to have only one disk device and only one
network, which should be of type bridge.
Currently the qemuDomainGetBlockInfo will return allocation == physical
for most backing stores. For a qcow2 block backed device it's possible
to return the highest lv extent allocated from qemu for an active guest.
That is a value where allocation != physical and one would hope be less.
However, if the guest is not running, then the code falls back to returning
allocation == physical. This turns out to be problematic for rhev which
monitors the size of the backing store. During a migration, before the
VM has been started on the target and while it is deemed inactive on the
source, there's a small window of time where the allocation is returned
as physical triggering the code to extend the file unnecessarily.
Since rhev uses transient domains and this is edge condition for a transient
domain, rather than returning good status and allocation == physical when
this "window of opportunity" exists, this patch will check for a transient
(or non persistent) domain and return a failure to the caller rather than
returning the defaults. For a persistent domain, the defaults will be
returned. The description for the virDomainGetBlockInfo has been updated
to describe the phenomena.
With this patch, user can setup the throttle blkio cgorup
for domain through the virsh cmd, such as:
virsh blkiotune domain1 --device-read-bytes-sec /dev/sda1,1000000,/dev/sda2,2000000
--device-write-bytes-sec /dev/sda1,1000000 --device-read-iops-sec /dev/sda1,10000
--device-write-iops-sec /dev/sda1,10000,/dev/sda2,0
This patch also add manpage for these new options.
Signed-off-by: Guan Qiang <hzguanqiang@corp.netease.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
While looking at event code, I noticed that the documentation was
trying to refer me to functions that don't exist. Also fix some
typos and poor formatting.
* src/libvirt.c (virConnectDomainEventDeregister)
(virConnectDomainEventRegisterAny)
(virConnectDomainEventDeregisterAny)
(virConnectNetworkEventRegisterAny)
(virConnectNetworkEventDeregisterAny): Link to correct function.
* include/libvirt.h.in (VIR_DOMAIN_EVENT_CALLBACK)
(VIR_NETWORK_EVENT_CALLBACK): Likewise.
(virDomainEventID, virConnectDomainEventGenericCallback)
(virNetworkEventID, virConnectNetworkEventGenericCallback):
Improve docs.
Signed-off-by: Eric Blake <eblake@redhat.com>
Recent addition of the gluster pool type omitted fixing the virsh and
virConnectListAllStoragePool filters. A typecast of the converting
function in virsh showed that also the sheepdog pool was omitted in the
command parser.
This patch adds gluster pool filtering support and fixes virsh to
properly convert all supported storage pool types. The added typecast
should avoid doing such mistakes in the future.
Define the public API for (de-)registering network events
and the callbacks for receiving lifecycle events. The lifecycle
event includes a 'detail' parameter to match the domain lifecycle
event data, but this is currently unused.
The network events related code goes into its own set of internal
files src/conf/network_event.[ch]
Avoid a nested comment compilation error, caused by me editing
Chen's patch.
* include/libvirt/libvirt.h.in: Fix typo.
Signed-off-by: Eric Blake <eblake@redhat.com>
s/causes/cause/
Each event callback has a single detail parameter, and can
thus only report a single cause. Also, make all the sub-event
documentation use similar wording.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
In the 'directory' and 'netfs' storage pools, a user can see
both 'file' and 'dir' storage volume types, to know when they
can descend into a subdirectory. But in a network-based storage
pool, such as the upcoming 'gluster' pool, we use 'network'
instead of 'file', and did not have any counterpart for a
directory until this patch. Adding a new volume type
'network-dir' is better than reusing 'dir', because it makes
it clear that the only way to access 'network' volumes within
that container is through the network mounting (leaving 'dir'
for something accessible in the local file system).
* include/libvirt/libvirt.h.in (virStorageVolType): Expand enum.
* docs/formatstorage.html.in: Document it.
* docs/schemasa/storagevol.rng (vol): Allow new value.
* src/conf/storage_conf.c (virStorageVol): Use new value.
* src/qemu/qemu_command.c (qemuBuildVolumeString): Fix client.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePool): Likewise.
* tools/virsh-volume.c (vshVolumeTypeToString): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemVolDelete): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Added a macro similar to the GLib's GLIB_CHECK_VERSION so that one can
simply do something like:
#if LIBVIR_CHECK_VERSION(1,1,3)
/* Call function here that appeared in 1.1.3 and newer */
virSomeNewFunction();
#endif
Noticed while revieweing the patches for qemu's new migration state.
* include/libvirt/libvirt.h.in (_virDomainJobInfo): Fix typo,
grammar.
* src/libvirt.c (virDomainGetJobInfo): Add cross reference.
Signed-off-by: Eric Blake <eblake@redhat.com>
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up offenders in the public API. Note that this is an API change;
but see commit 6ac6f59, where we first argued that this change is
harmless (but with that commit not actually making the change that it
claimed to be making):
Although this is an API change (not ABI though), real callers won't be
impacted. Why?
1. these callback members are read-only, so it is less likely that
someone is trying to assign into the struct members.
2. The only way to register a virConnectDomainEventGraphicsCallback is
to cast it through a call to virConnectDomainEventRegisterAny. That is,
even if the user's callback function leaves out the const, we never use
the typedef as the direct type of any API parameter. Since they are
already casting their function pointer into a munged type before
registering it, their code will continue to compile.
* include/libvirt/libvirt.h.in
(virConnectDomainEventGraphicsCallback): Use intended type.
The parameter allows overriding default listen address for '-incoming'
cmd line argument on destination.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We currently have other error codes in singular form, e.g.
VIR_ERR_NETWORK_EXIST. Cleanup the previous patch to match the form.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I created a storage volume(eg: test) from a storage pool(eg:vg10) using
the following command:"virsh vol-create-as --pool vg10 --name test --capacity 300M."
When I re-executed the above command, the output was as the following:
"error: Failed to create vol test
error: Storage volume not found: storage vol 'test' already exists"
I think the output "Storage volume not found" is not appropriate. Because in fact storage
vol test has been found at this time. And then I think virErrorNumber should includes
VIR_ERR_STORAGE_EXIST which can also be used elsewhere. So I make this patch. The result
is as following:
"error: Failed to create vol test
error: storage volume 'test' exists already"
The new function virConnectGetCPUModelNames allows to retrieve the list
of CPU models known by the hypervisor for a specific architecture.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
In commit 6d41cb8, the interface for virEventAddHandleFunc was changed.
This patch updates the documentation for virEventAddHandle to reflect
the new significance of the return value. Also, both functions now
mention -1 for failure.
Currently the virConnectBaselineCPU API does not expose the CPU features
that are part of the CPU's model. This patch adds a new flag,
VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES, that causes the API to explicitly
list all features that are part of that model.
Signed-off-by: Don Dugger <donald.d.dugger@intel.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Go through disks of guest, if one disk doesn't exist or its backing
chain is broken, with 'optional' startupPolicy, for CDROM and Floppy
we only discard its source path definition in xml, for disks we drop
it from disk list and free it.
The VIR_DOMAIN_PAUSED_GUEST_PANICKED constant is badly named,
leaking the QEMU event name. Elsewhere in the API we use
'CRASHED' rather than 'PANICKED', and the addition of 'GUEST'
is redundant since all events are guest related.
Thus rename it to VIR_DOMAIN_PAUSED_CRASHED, which matches
with VIR_DOMAIN_RUNNING_CRASHED and VIR_DOMAIN_EVENT_CRASHED.
It was added in commit 14e7e0ae8d
which post-dates v1.1.0, so is safe to rename before 1.1.1
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The VIR_DOMAIN_SHUTDOWN_CRASHED state constant does not appear
to be used in the QEMU code anyway. It also doesn't make much
(any) sense, since the 'shutdown' state is a transient state
between 'running' and 'shutoff' and when a guest crashes, it
does not end up in a 'shutdown' state, only 'shutoff'.
It was added in commit 14e7e0ae8d
which post-dates v1.1.0, so is safe to remove before 1.1.1
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To register virtual machines and containers with systemd-machined,
and thus have cgroups auto-created, we need to talk over DBus.
This is somewhat tedious code, so introduce a dedicated function
to isolate the DBus call in one place.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Doing DBus method calls using libdbus.so is tedious in the
extreme. systemd developers came up with a nice high level
API for DBus method calls (sd_bus_call_method). While
systemd doesn't use libdbus.so, their API design can easily
be ported to libdbus.so.
This patch thus introduces methods virDBusCallMethod &
virDBusMessageRead, which are based on the code used for
sd_bus_call_method and sd_bus_message_read. This code in
systemd is under the LGPLv2+, so we're license compatible.
This code is probably pretty unintelligible unless you are
familiar with the DBus type system. So I added some API
docs trying to explain how to use them, as well as test
cases to validate that I didn't screw up the adaptation
from the original systemd code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
With container based virt, it is useful to be able to pass
pre-opened file descriptors to the container init process.
This allows for containers to be auto-activated from incoming
socket connections, passing the active socket into the container.
To do this, introduce a pair of new APIs, virDomainCreateXMLWithFiles
and virDomainCreateWithFiles, which accept an array of file
descriptors. For the LXC driver, UNIX file descriptor passing
will be used to send them to libvirtd, which will them pass
them down to libvirt_lxc, which will then pass them to the container
init process.
This will only be implemented for LXC right now, but the design
is generic enough it could work with other hypervisors, hence
I suggest adding this to libvirt.so, rather than libvirt-lxc.so
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add new API in order to set the balloon memory driver statistics collection
period in order to allow dynamic period adjustment for the virsh dommemstats to
display balloon stats data
This patch introduces two new APIs virDomainMigrate3 and
virDomainMigrateToURI3 that may be used in place of their older
variants. These new APIs take optional migration parameters (such as
bandwidth, domain XML, ...) in an array of virTypedParameters, which
makes adding new parameters easier as there's no need to introduce new
APIs whenever a new migration parameter needs to be added. Both APIs are
backward compatible and will automatically use older migration calls in
case the new calls are not supported as long as the typed parameters
array does not contain any parameter which was not supported by the
older calls.
This patch introduces the virAccessManagerPtr class as the
interface between virtualization drivers and the access
control drivers. The viraccessperm.h file defines the
various permissions that will be used for each type of object
libvirt manages
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Paolo Bonzini pointed out that it's actually possible to migrate a qemu
instance that was paused due to I/O error and it will be able to work on
the destination if the storage is accessible.
This patch introduces flag VIR_MIGRATE_ABORT_ON_ERROR that cancels the
migration in case an I/O error happens while it's being performed and
allows migration without this flag. This flag can be possibly used for
other error reasons that may be introduced in the future.
This patch fixes changes done in commit 29c1e913e4
that was pushed without implementing review feedback.
The flag introduced by the patch is changed to VIR_DOMAIN_VCPU_GUEST and
documentation makes the difference between regular hotplug and this new
functionality more explicit.
The virsh options that enable the use of the new flag are changed to
"--guest" and the documentation is fixed too.
This flag will allow to use qemu guest agent commands to disable
(offline) and enable (online) processors in a live guest that has the
guest agent running.
For future work we need _virDomainEventGraphicsAddress and
_virDomainEventGraphicsSubjectIdentity members to be char * not const
char *. We are strdup()-ing them anyway, so they should have been char *
anyway (from const correctness POV). However, we don't want users to
change passed values, so we need to make the callback's argument const.
Although this is an API change (not ABI though), real callers won't be
impacted. Why?
1. these callback members are read-only, so it is less likely that
someone is trying to assign into the struct members.
2. The only way to register a virConnectDomainEventGraphicsCallback is
to cast it through a call to virConnectDomainEventRegisterAny. That is,
even if the user's callback function leaves out the const, we never use
the typedef as the direct type of any API parameter. Since they are
already casting their function pointer into a munged type before
registering it, their code will continue to compile.
Apps using libvirt will often have code like
if (virXXXX() < 0) {
virErrorPtr err = virGetLastError();
fprintf(stderr, "Something failed: %s\n",
err && err->message ? err->message :
"unknown error");
return -1;
}
Checking for a NULL error object or message leads to very
verbose code. A virGetLastErrorMessage() helper from libvirt
can simplify this to
if (virXXXX() < 0) {
fprintf(stderr, "Something failed: %s\n",
virGetLastErrorMessage());
return -1;
}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The existing virNodeDeviceDettach() assumes that there is only a
single PCI device assignment backend driver appropriate for any
hypervisor. This is no longer true, as the qemu driver is getting
support for PCI device assignment via VFIO. The new API
virNodeDeviceDetachFlags adds a driverName arg that should be set to
the exact same string set in a domain <hostdev>'s <driver name='x'/>
element (i.e. "vfio", "kvm", or NULL for default). It also adds a
flags arg for good measure (and because it's possible we may need it
when we start dealing with VFIO's "device groups").
With this patch, include public headers in "" form is only allowed
for "internal.h". And only the external tools (examples|tools|python
|include/libvirt) can include the public headers in <> form.
Add a virCgroupIsolateMount method which looks at where the
current process is place in the cgroups (eg /system/demo.lxc.libvirt)
and then remounts the cgroups such that this sub-directory
becomes the root directory from the current process' POV.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
VIR_CONNECT_LIST_NODE_DEVICES_CAP_FC_HOST to filter the FC HBA,
and VIR_CONNECT_LIST_NODE_DEVICES_CAP_VPORTS to filter the FC HBA
which supports vport.
Introduce a local object virIdentity for managing security
attributes used to form a client application's identity.
Instances of this object are intended to be used as if they
were immutable, once created & populated with attributes
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new virDomainLxcEnterSecurityLabel() function as a
counterpart to virDomainLxcEnterNamespaces(), which can
change the current calling process to have a new security
context. This call runs client side, not in libvirtd
so we can't use the security driver infrastructure.
When entering a namespace, the process spawned from virsh
will default to running with the security label of virsh.
The actual desired behaviour is to run with the security
label of the container most of the time. So this changes
virsh lxc-enter-namespace command to invoke the
virDomainLxcEnterSecurityLabel method.
The current behaviour is:
LABEL PID TTY TIME CMD
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 1 pts/0 00:00:00 systemd
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 3 pts/1 00:00:00 sh
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 24 ? 00:00:00 systemd-journal
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 29 ? 00:00:00 dhclient
staff_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 47 ? 00:00:00 ps
Note the ps command is running as unconfined_t, After this patch,
The new behaviour is this:
virsh -c lxc:/// lxc-enter-namespace dan -- /bin/ps -eZ
LABEL PID TTY TIME CMD
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 1 pts/0 00:00:00 systemd
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 3 pts/1 00:00:00 sh
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 24 ? 00:00:00 systemd-journal
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 32 ? 00:00:00 dhclient
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 38 ? 00:00:00 ps
The '--noseclabel' flag can be used to skip security labelling.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since the name (like scsi_host10) is not stable for vHBA, (it can
be changed either after recreating or system rebooting), current
API virNodeDeviceLookupByName is not nice to use for management app
in this case. (E.g. one wants to destroy the vHBA whose name has
been changed after system rebooting, he has to find out current
name first).
Later patches will support the persistent vHBA via storage pool,
with which one can identify the vHBA stably by the wwnn && wwpn
pair.
So this new API comes.
In commit 3ac26e2645 parameter "path" was
renamed to "disk" but this change was not reflected in the documentation.
Additionally, documentation of the "opaque" parameter was missing.
Working with virTypedParameters in clients written in C is ugly and
requires all clients to duplicate the same code. This set of APIs makes
this code for manipulating with virTypedParameters integral part of
libvirt so that all clients may benefit from it.
The api builder always associates comments to the last member it read,
not to the current member even if there was a comment for the previous
member and a comma was already seen.
This has the effect that the comment for the previous member gets
overwritten and the current member has no comment at all.
This patch introduces support for LXC specific public APIs. In
common with what was done for QEMU, this creates a libvirt_lxc.so
library and libvirt/libvirt-lxc.h header file.
The actual APIs are
int virDomainLxcOpenNamespace(virDomainPtr domain,
int **fdlist,
unsigned int flags);
int virDomainLxcEnterNamespace(virDomainPtr domain,
unsigned int nfdlist,
int *fdlist,
unsigned int *noldfdlist,
int **oldfdlist,
unsigned int flags);
which provide a way to use the setns() system call to move the
calling process into the container's namespace. It is not
practical to write in a generically applicable manner. The
nearest that we could get to such an API would be an API which
allows to pass a command + argv to be executed inside a
container. Even if we had such a generic API, this LXC specific
API is still useful, because it allows the caller to maintain
the current process context, in particular any I/O streams they
have open.
NB the virDomainLxcEnterNamespace() API is special in that it
runs client side, so does not involve the internal driver API.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
With the most recent patch from Claudio, I realized how many
indentation flaws we have in the libvirt.h.in file. Even though
they are harmless, it's still worth fixing them.
This patch adds a new API, virDomainOpenChannel, that uses streams to
connect to a virtio channel on a guest. This creates a secure
communication channel between a guest and a libvirt client.
This behaves the same as virDomainOpenConsole, except on channels
instead of console/serial/parallel devices.
Offline migration transfers inactive definition of a domain (which may
or may not be active). After successful completion, the domain remains
in its current state on source host and is defined but inactive on
destination host. It's a bit more clever than virDomainGetXMLDesc() on
source host followed by virDomainDefineXML() on destination host, as
offline migration will run pre-migration hook to update the domain XML
on destination host. Currently, copying non-shared storage is not
supported during offline migration.
Offline migration can be requested with a new migration flag called
VIR_MIGRATE_OFFLINE (which has to be combined with
VIR_MIGRATE_PERSIST_DEST flag).
Add VIR_STORAGE_VOL_CREATE_PREALLOC_METADATA flag to virStorageVolCreateXML
and virStorageVolCreateXMLFrom. This flag requests metadata
preallocation when creating/cloning qcow2 images, resulting in creating
a sparse file with qcow2 metadata. It has only slightly larger disk usage
compared to new image with no allocation, but offers higher performance.
The virDomainShutdownFlags and virDomainReboot APIs allow the caller
to request the operation is implemented via either acpi button press
or a guest agent. For containers, a couple of other methods make
sense, a message to /dev/initctl, and direct kill(SIGTERM|HUP) of
the container init process.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To be able todo controlled shutdown/reboot of containers an
API to talk to init via /dev/initctl is required. Fortunately
this is quite straightforward to implement, and is supported
by both sysvinit and systemd. Upstart support for /dev/initctl
is unclear.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add an API for sending signals to arbitrary processes in the
guest OS. This is primarily useful for container based virt,
but can be used for machine virt too, if there is a suitable
guest agent,
* include/libvirt/libvirt.h.in: Add virDomainSendProcessSignal
and virDomainProcessSignal enum
* src/driver.h: Driver entry point
* src/libvirt.c, src/libvirt_public.syms: Impl for new API
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This will call FITRIM within guest. The API has 4 arguments,
however, only 2 will be used for now (@dom and @minumum).
The rest two are there if in future qemu guest agent learns them.
As we enable more modes of snapshot creation, it becomes more important
to be able to quickly filter based on snapshot properties. This patch
introduces new filter flags; subsequent patches will introduce virsh
back-compat filtering, as well as actual libvirt filtering.
* include/libvirt/libvirt.h.in (virDomainSnapshotListFlags): Add
five new flags in two new groups.
* src/libvirt.c (virDomainSnapshotNum, virDomainSnapshotListNames)
(virDomainListAllSnapshots, virDomainSnapshotNumChildren)
(virDomainSnapshotListChildrenNames)
(virDomainSnapshotListAllChildren): Document them.
* src/conf/snapshot_conf.h (VIR_DOMAIN_SNAPSHOT_FILTERS_STATUS)
(VIR_DOMAIN_SNAPSHOT_FILTERS_LOCATION): Add new convenience filter
collection macros.
* tools/virsh-snapshot.c (cmdSnapshotList): Add 5 new flags.
* tools/virsh.pod (snapshot-list): Document them.
Lately there were a few reports of the output of the virsh nodeinfo
command being inaccurate. This patch tries to avoid that by checking if
the topology actually makes sense. If it doesn't we then report a
synthetic topology that indicates to the user that the host capabilities
should be checked for the actual topology.
This is supposed to be thrown every time we need to pause domain
because of API execution (e.g. qemuDomainSaveInternal) but fails
to restore it back after. In this case, domain remains paused,
however, none of existing reasons can fit this scenario.
The default behavior while creating external checkpoints is to pause the
guest while the memory state is captured. We want the users to sacrifice
space saving for creating the memory save image while the guest is live
to minimize downtime.
This patch adds a flag that causes the guest not to be paused before
taking the snapshot.
*include/libvirt/libvirt.h.in:
- add new paused reason: VIR_DOMAIN_PAUSED_SNAPSHOT
- add new flag for taking snapshot: VIR_DOMAIN_SNAPSHOT_CREATE_LIVE
*tools/virsh-domain-monitor.c:
- add string representation for VIR_DOMAIN_PAUSED_SNAPSHOT
*tools/virsh-snapshot.c:
- add support for VIR_DOMAIN_SNAPSHOT_CREATE_LIVE
*tools/virsh.pod:
- add docs for --live option added to use
VIR_DOMAIN_SNAPSHOT_CREATE_LIVE flag
Handle the new type of block copy event and info. Of course,
this patch does nothing until a later patch actually allows the
creation/abort of a block copy job.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_JOB_READY): New
block job status.
* src/libvirt.c (virDomainBlockRebase): Document the event.
* src/qemu/qemu_monitor_json.c (eventHandlers): New event.
(qemuMonitorJSONHandleBlockJobReady): New function.
(qemuMonitorJSONGetBlockJobInfoOne): Translate new job type.
(qemuMonitorJSONHandleBlockJobImpl): Handle new event and job type.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Recognize
the event to minimize snooping.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Snoop a successful
info query to save effort on a pivot request.
New macro VIR_CPU_USED added to facilitate the interpretation of
cpu maps.
Further, hardened the other cpumap macros against invocations
like VIR_CPU_USE(cpumap + 1, cpu)
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Adding a new API to obtain information about the
host node's present, online and offline CPUs.
int virNodeGetCPUMap(virConnectPtr conn,
unsigned char **cpumap,
unsigned int *online,
unsigned int flags);
The function will return the number of CPUs present on the host
or -1 on failure;
If cpumap is non-NULL virNodeGetCPUMap will allocate an array
containing a bit map representation of the online CPUs. It's
the callers responsibility to deallocate cpumap using free().
If online is non-NULL, the variable pointed to will contain
the number of online host node CPUs.
The variable flags has been added to support future extensions
and must be set to 0.
Extend the driver structure by nodeGetCPUMap entry in support of the
new API virNodeGetCPUMap.
Added implementation of virNodeGetCPUMap to libvirt.c
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit 12ad7435 added new functions (virNodeGetMemoryParameters,
virNodeSetMemoryParameters) into the section of the file reserved
for deprecated names. Fix this by moving things earlier; split
into two patches to make git diff easier to read.
* include/libvirt/libvirt.h.in: Move virNodeGetMemoryParameters
and friends earlier, add a note to prevent relapse.
Commit 12ad7435 added new functions (virNodeGetMemoryParameters,
virNodeSetMemoryParameters) into the section of the file reserved
for deprecated names. Fix this by moving things earlier; split
into two patches to make git diff easier to read.
* include/libvirt/libvirt.h.in: Move virTypedParameter earlier.
The previously introduced virFile{Lock,Unlock} APIs provide a
way to acquire/release fcntl() locks on individual files. For
unknown reason though, the POSIX spec says that fcntl() locks
are released when *any* file handle referring to the same path
is closed. In the following sequence
threadA: fd1 = open("foo")
threadB: fd2 = open("foo")
threadA: virFileLock(fd1)
threadB: virFileLock(fd2)
threadB: close(fd2)
you'd expect threadA to come out holding a lock on 'foo', and
indeed it does hold a lock for a very short time. Unfortunately
when threadB does close(fd2) this releases the lock associated
with fd1. For the current libvirt use case for virFileLock -
pidfiles - this doesn't matter since the lock is acquired
at startup while single threaded an never released until
exit.
To provide a more generally useful API though, it is necessary
to introduce a slightly higher level abstraction, which is to
be referred to as a "lockspace". This is to be provided by
a virLockSpacePtr object in src/util/virlockspace.{c,h}. The
core idea is that the lockspace keeps track of what files are
already open+locked. This means that when a 2nd thread comes
along and tries to acquire a lock, it doesn't end up opening
and closing a new FD. The lockspace just checks the current
list of held locks and immediately returns VIR_ERR_RESOURCE_BUSY.
NB, the API as it stands is designed on the basis that the
files being locked are not being otherwise opened and used
by the application code. One approach to using this API is to
acquire locks based on a hash of the filepath.
eg to lock /var/lib/libvirt/images/foo.img the application
might do
virLockSpacePtr lockspace = virLockSpaceNew("/var/lib/libvirt/imagelocks");
lockname = md5sum("/var/lib/libvirt/images/foo.img");
virLockSpaceAcquireLock(lockspace, lockname);
NB, in this example, the caller should ensure that the path
is canonicalized before calculating the checksum.
It is also possible to do locks directly on resources by
using a NULL lockspace directory and then using the file
path as the lock name eg
virLockSpacePtr lockspace = virLockSpaceNew(NULL);
virLockSpaceAcquireLock(lockspace, "/var/lib/libvirt/images/foo.img");
This is only safe to do though if no other part of the process
will be opening the files. This will be the case when this
code is used inside the soon-to-be-reposted virlockd daemon
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch adds support for SUSPEND_DISK event; both lifecycle and
separated. The support is added for QEMU, machines are changed to
PMSUSPENDED, but as QEMU sends SHUTDOWN afterwards, the state changes
to shut-off. This and much more needs to be done in order for libvirt
to work with transient devices, wake-ups etc. This patch is not
aiming for that functionality.
Upstream kernel introduced new sysfs knob "merge_across_nodes" to
specify if pages from different numa nodes can be merged. When set
to 0, only pages which physically reside in the memory area of
same NUMA node can be merged. When set to 1, pages from all nodes
can be merged.
This patch supports the tuning by adding new param field
"shm_merge_across_nodes".
Using VIR_DOMAIN_XML_MIGRATABLE flag, one can request domain's XML
configuration that is suitable for migration or save/restore. Such XML
may contain extra run-time stuff internal to libvirt and some default
configuration may be removed for better compatibility of the XML with
older libvirt releases.
This flag may serve as an easy way to get the XML that can be passed
(after desired modifications) to APIs that accept custom XMLs, such as
virDomainMigrate{,ToURI}2 or virDomainSaveFlags.
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
These enums originally were put into the flags for virNetworkUpdate,
and when they were moved into their own enum, the numbers weren't
appropriately changed, causing the commands to start with value 2
instead of 1. This causes problems for things like ENUM_IMPL, which
wants a string for every value in the requested range, including those
not used in the enum.
This patch adds a new public API virNetworkUpdate that will permit
updating an existing network configuration without requiring that the
network be destroyed/restarted for the changes to take effect.
A block commit moves data in the opposite direction of block pull.
Block pull reduces the chain length by dropping backing files after
data has been pulled into the top overlay, and is always safe; block
commit reduces the chain length by dropping overlays after data has
been committed into the backing file, and any files that depended
on base but not on top are invalidated at any point where they have
unallocated data that is now pointing to changed contents in base.
Both directions are useful, however: a qcow2 layer that is more than
50% allocated will typically be faster with a pull operation, while
a qcow2 layer with less than 50% allocation will be faster as a
commit operation. Committing across multiple layers can be more
efficient than repeatedly committing one layer at a time, but
requires extra support from the hypervisor.
This API matches Jeff Cody's proposed qemu command 'block-commit':
https://lists.gnu.org/archive/html/qemu-devel/2012-09/msg02226.html
Jeff's command is still in the works for qemu 1.3, and may gain
further enhancements, such as the ability to control on-error
handling (it will be comparable to the error handling Paolo is
adding to 'drive-mirror', so a similar solution will be needed
when I finally propose virDomainBlockCopy with more functionality
than the basics supported by virDomainBlockRebase). However, even
without qemu support, this API will be useful for _offline_ block
commits, by wrapping qemu-img calls and turning them into a block
job, so this API is worth committing now.
For some examples of how this will be implemented, all starting
with the chain: base <- snap1 <- snap2 <- active
+ These are equivalent:
virDomainBlockCommit(dom, disk, NULL, NULL, 0, 0)
virDomainBlockCommit(dom, disk, NULL, "active", 0, 0)
virDomainBlockCommit(dom, disk, "base", NULL, 0, 0)
virDomainBlockCommit(dom, disk, "base", "active", 0, 0)
but cannot be implemented for online qemu with round 1 of
Jeff's patches; and for offline images, it would require
three back-to-back qemu-img invocations unless qemu-img
is patched to allow more efficient multi-layer commits;
the end result would be 'base' as the active disk with
contents from all three other files, where 'snap1' and
'snap2' are invalid right away, and 'active' is invalid
once any further changes to 'base' are made.
+ These are equivalent:
virDomainBlockCommit(dom, disk, "snap2", NULL, 0, 0)
virDomainBlockCommit(dom, disk, NULL, NULL, 0, _SHALLOW)
they cannot be implemented for online qemu, but for offline,
it is a matter of 'qemu-img commit active', so that 'snap2'
is now the active disk with contents formerly in 'active'.
+ Similarly:
virDomainBlockCommit(dom, disk, "snap2", NULL, 0, _DELETE)
for an offline domain will merge 'active' into 'snap2', then
delete 'active' to avoid leaving a potentially invalid file
around.
+ This version:
virDomainBlockCommit(dom, disk, NULL, "snap2", 0, _SHALLOW)
can be implemented online with 'block-commit' passing a base of
snap1 and a top of snap2; and can be implemented offline by
'qemu-img commit snap2' followed by 'qemu-img rebase -u
-b snap1 active'
* include/libvirt/libvirt.h.in (virDomainBlockCommit): New API.
* src/libvirt.c (virDomainBlockCommit): Implement it.
* src/libvirt_public.syms (LIBVIRT_0.10.2): Export it.
* src/driver.h (virDrvDomainBlockCommit): New driver callback.
* docs/apibuild.py (CParser.parseSignature): Add exception.
* include/libvirt/libvirt.h.in: (Add macros for the param fields,
declare the APIs).
* src/driver.h: (New methods for the driver struct)
* src/libvirt.c: (Implement the public APIs)
* src/libvirt_public.syms: (Export the public symbols)
This is to list the secret objects. Supports to filter the secrets
by its storage location, and whether it's private or not.
include/libvirt/libvirt.h.in: Declare enum virConnectListAllSecretFlags
and virConnectListAllSecrets.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllSecrets)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
This is to list the network filter objects. No flags are supported
include/libvirt/libvirt.h.in: Declare enum virConnectListAllNWFilterFlags
and virConnectListAllNWFilters.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllNWFilters)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
This is to list the node device objects, supports to filter the results
by capability types.
include/libvirt/libvirt.h.in: Declare enum virConnectListAllNodeDeviceFlags
and virConnectListAllNodeDevices.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllNodeDevices)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
This is to list the interface objects, supported filtering flags
are: active|inactive.
include/libvirt/libvirt.h.in: Declare enum virConnectListAllInterfaceFlags
and virConnectListAllInterfaces.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllInterfaces)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
This is to list the network objects, supported filtering flags
are: active|inactive, persistent|transient, autostart|no-autostart.
include/libvirt/libvirt.h.in: Declare enum virConnectListAllNetworkFlags
and virConnectListAllNetworks.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllNetworks)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
Simply returns the storage volume objects. No supported filter
flags.
include/libvirt/libvirt.h.in: Declare the API
python/generator.py: Skip the function for generating. virStoragePool.py
will be added in later patch.
src/driver.h: virDrvStoragePoolListVolumesFlags
src/libvirt.c: Implementation for the API.
src/libvirt_public.syms: Export the symbol to public
This introduces a new API to list the storage pool objects,
4 groups of flags are provided to filter the returned pools:
* Active or not
* Autostarting or not
* Persistent or not
* And the pool type.
include/libvirt/libvirt.h.in: New enum virConnectListAllStoragePoolFlags;
Declare the API.
python/generator.py: Skip the generating
src/driver.h: (virDrvConnectListAllStoragePools)
src/libvirt.c: Implementation for the API.
src/libvirt_public.syms: Export the symbol.
Currently, when guest agent is configured but not responsive
(e.g. due to appropriate service not running in the guest)
we return VIR_ERR_INTERNAL_ERROR. Both are wrong. Therefore
we need to introduce new error code to reflect this case.
Add @seconds variable to qemuAgentSend().
When @timemout is true, @seconds controls how long to wait for a
response (if @seconds is VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT,
default to QEMU_AGENT_WAIT_TIME).
In addition, @seconds must be >= 0 or VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT.
If @timeout is false, @seconds is ignored.
Signed-off-by: MATSUDA Daiki <matsudadik@intellilink.co.jp>
This patch adds two macros: VIR_DOMAIN_SCHEDULER_EMULATOR_PERIOD,
VIR_DOMAIN_SCHEDULER_EMULATOR_QUOTA for controlling cpu bandwidth
for emulator activities not tied to vcpus
Introduce 2 APIs to set/get physical cpu pinning info of emulator threads.
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
This patch adds helper functions that enable us to use libssh2 in
conjunction with libvirt's virNetSockets for ssh transport instead of
spawning "ssh" client process.
This implemetation supports tunneled plaintext, keyboard-interactive,
private key, ssh agent based and null authentication. Libvirt's Auth
callback is used for interaction with the user. (Keyboard interactive
authentication, adding of host keys, private key passphrases). This
enables seamless integration into the application using libvirt. No
helpers as "ssh-askpass" are needed.
Reading and writing of OpenSSH style "known_hosts" files is supported.
Communication is done using SSH exec channel, where the user may specify
arbitrary command to be executed on the remote side and reads and writes
to/from stdin/out are sent through the ssh channel. Usage of stderr is
not (yet) supported.
This patch updates libvirt's API to allow applications to inspect the
full list of security labels of a domain.
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Move the functions the parse/format, and validate PCI addresses to
their own file so they can be conveniently used in other places
besides device_conf.c
Refactoring existing code without causing any functional changes to
prepare for new code.
This patch makes the code reusable.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
This patch introduces a new error code VIR_ERR_OPERATION_UNSUPPORTED to
mark error messages regarding operations that failed due to lack of
support on the hypervisor or other than libvirt issues.
The code is first used in reporting error if qemu does not support block
IO tuning variables yielding error message:
error: Unable to get block I/O throttle parameters
error: Operation not supported: block_io_throttle field
'total_bytes_sec' missing in qemu's output
instead of:
error: Unable to get block I/O throttle parameters
error: internal error cannot read total_bytes_sec
Parallels Cloud Server is a cloud-ready virtualization
solution that allows users to simultaneously run multiple virtual
machines and containers on the same physical server.
More information can be found here: http://www.parallels.com/products/pcs/
Also beta version of Parallels Cloud Server can be downloaded there.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Define new virConnect{Register,Unregister}CloseCallback() public APIs
which allows registering/unregistering a callback to be invoked when
the connection to a hypervisor is closed. The callback is provided
with the reason for the close, which may be 'error', 'eof', 'client'
or 'keepalive'.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This is a follow up patch of commit f9ce7dad6, it modifies all
the files which declare the copyright like "See COPYING.LIB for
the License of this software" to use the detailed/consistent one.
And deserts the outdated comments like:
* libvirt-qemu.h:
* Summary: qemu specific interfaces
* Description: Provides the interfaces of the libvirt library to handle
* qemu specific methods
*
* Copy: Copyright (C) 2010, 2012 Red Hat, Inc.
Uses the more compact style like:
* libvirt-qemu.h: Interfaces specific for QEMU/KVM driver
*
* Copyright (C) 2010, 2012 Red Hat, Inc.
to query a guests's hostname. Containers like LXC and OpenVZ allow to
set a hostname different from the hosts name and QEMU's guest agent
could provide similar functionality.
When the guest changes its memory balloon applications may want
to know what the new value is, without having to periodically
poll on XML / domain info. Introduce a "balloon change" event
to let apps see this
* include/libvirt/libvirt.h.in: Define the
virConnectDomainEventBalloonChangeCallback callback
and VIR_DOMAIN_EVENT_ID_BALLOON_CHANGE constant
* python/libvirt-override-virConnect.py,
python/libvirt-override.c: Wire up helpers for new event
* daemon/remote.c: Helper for serializing balloon event
* examples/domain-events/events-c/event-test.c,
examples/domain-events/events-python/event-test.py: Add
example of balloon event usage
* src/conf/domain_event.c, src/conf/domain_event.h: Handling
of balloon events
* src/remote/remote_driver.c: Add handler of balloon events
* src/remote/remote_protocol.x: Define wire protocol for
balloon events
* src/remote_protocol-structs: Likewise.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Storage is one of the last domains in libvirt where we don't fully
utilize inactive and live XML. Okay, it might be because we don't
have support for that. So implement such support. However, we need
to fallback when talking to old daemon which doesn't support this
new flag called VIR_STORAGE_XML_INACTIVE.
There was an inherent race between virDomainSnapshotNum() and
virDomainSnapshotListNames(), where an additional snapshot could
be created in the meantime, or where a snapshot could be deleted
before converting the name back to a virDomainSnapshotPtr. It
was also an awkward name: the function operates on domains, not
domain snapshots. virDomainSnapshotListChildrenNames() suffered
from the same inherent race, although its naming was nicer.
This patch makes things nicer by grabbing a snapshot list
atomically, in the format most useful to the user.
* include/libvirt/libvirt.h.in (virDomainListAllSnapshots)
(virDomainSnapshotListAllChildren): New declarations.
* src/libvirt.c (virDomainSnapshotListNames)
(virDomainSnapshotListChildrenNames): Add cross-references.
(virDomainListAllSnapshots, virDomainSnapshotListAllChildren):
New functions.
* src/libvirt_public.syms (LIBVIRT_0.9.13): Export them.
* src/driver.h (virDrvDomainListAllSnapshots)
(virDrvDomainSnapshotListAllChildren): New callbacks.
* python/generator.py (skip_function): Prepare for later
hand-written versions.
It turns out that one-bit filtering makes it hard to select the inverse
set, so it is easier to provide filtering groups. For back-compat,
omitting all bits within a group means the group is not used for
filtering, and by definition of a group (each snapshot matches exactly
one bit within the group, and the set of bits in the group covers all
snapshots), selecting all bits also makes the group useless.
Unfortunately, virDomainSnapshotListChildren defined the bit
VIR_DOMAIN_SNAPSHOT_LIST_DESCENDANTS as an expansion rather than a
filter, so we cannot make it part of a filter group, so that bit
(and its counterpart VIR_DOMAIN_SNAPSHOT_LIST_ROOTS for
virDomainSnapshotList) remains a single control bit.
* include/libvirt/libvirt.h.in (virDomainSnapshotListFlags): Add a
couple more flags.
* src/libvirt.c (virDomainSnapshotNum)
(virDomainSnapshotNumChildren): Document them.
(virDomainSnapshotListNames, virDomainSnapshotListChildrenNames):
Likewise, and add thread-safety caveats.
* src/conf/virdomainlist.h (VIR_DOMAIN_SNAPSHOT_FILTERS_*): New
convenience macros.
* src/conf/domain_conf.c (virDomainSnapshotObjListCopyNames)
(virDomainSnapshotObjListCount): Support the new flags.
This patch adds a new public api that lists domains. The new approach is
different from those used before. There are key points to this:
1) The list is acquired atomically and contains both active and inactive
domains (guests). This eliminates the need to call two different list
APIs, where the state might change in between the calls.
2) The returned list consists of virDomainPtrs instead of names or ID's
that have to be converted to virDomainPtrs anyways using separate calls
for each one of them. This is more convenient and saves hypervisor calls.
3) The returned list is auto-allocated. This saves a lot of hassle for
the users.
4) Built in support for filtering. The API call supports various
filtering flags that modify the output list according to user needs.
Available filter groups:
Domain status:
VIR_CONNECT_LIST_DOMAINS_ACTIVE, VIR_CONNECT_LIST_DOMAINS_INACTIVE
Domain persistence:
VIR_CONNECT_LIST_DOMAINS_PERSISTENT,
VIR_CONNECT_LIST_DOMAINS_TRANSIENT
Domain state:
VIR_CONNECT_LIST_DOMAINS_RUNNING, VIR_CONNECT_LIST_DOMAINS_PAUSED,
VIR_CONNECT_LIST_DOMAINS_SHUTOFF, VIR_CONNECT_LIST_DOMAINS_OTHER
Existence of managed save image:
VIR_CONNECT_LIST_DOMAINS_MANAGEDSAVE,
VIR_CONNECT_LIST_DOMAINS_NO_MANAGEDSAVE
Auto-start option:
VIR_CONNECT_LIST_DOMAINS_AUTOSTART,
VIR_CONNECT_LIST_DOMAINS_NO_AUTOSTART
Existence of snapshot:
VIR_CONNECT_LIST_DOMAINS_HAS_SNAPSHOT,
VIR_CONNECT_LIST_DOMAINS_NO_SNAPSHOT
5) The python binding returns a list of domain objects that is very neat
to work with.
The only problem with this approach is no support from code generators
so both RPC code and python bindings had to be written manually.
*include/libvirt/libvirt.h.in: - add API prototype
- clean up whitespace mistakes nearby
*python/generator.py: - inhibit generation of the bindings for the new
api
*src/driver.h: - add driver prototype
- clean up some whitespace mistakes nearby
*src/libvirt.c: - add public implementation
*src/libvirt_public.syms: - export the new symbol
Right now, starting from just a virDomainSnapshotPtr, and wanting to
know if it is the current snapshot for its respective domain, you have
to use virDomainSnapshotGetDomain(), then virDomainSnapshotCurrent(),
then compare the two names returned by virDomainSnapshotGetName().
It is a bit easier if we can directly query this information from the
snapshot itself.
Right now, it is possible to filter a snapshot listing based on
whether snapshots have metadata that would prevent domain deletion,
but the only way to learn if an individual snapshot has metadata is
to see if that snapshot appears in the list returned by a listing.
Additionally, I hope to expand the qemu driver in a future patch to
use qemu-img to reconstruct snapshot XML corresponding to internal
qcow2 snapshot names not otherwise tracked by libvirt (in part, so
that libvirt can guarantee that new snapshots are not created with
a name that would silently corrupt the existing portion of the qcow2
file); if I ever get that in, then it would no longer be an all-or-none
decision on whether snapshots have metadata, and becomes all the more
important to be able to directly determine that information from a
particular snapshot.
Other query functions (such as virDomainIsActive) do not have a flags
argument, but since virDomainHasCurrentSnapshot takes a flags argument,
I figured it was safer to provide a flags argument here as well.
* include/libvirt/libvirt.h.in (virDomainSnapshotIsCurrent)
(virDomainSnapshotHasMetadata): New declarations.
* src/libvirt.c (virDomainSnapshotIsCurrent)
(virDomainSnapshotHasMetadata): New functions.
* src/libvirt_public.syms (LIBVIRT_0.9.13): Export them.
* src/driver.h (virDrvDomainSnapshotIsCurrent)
(virDrvDomainSnapshotHasMetadata): New driver callbacks.
virDomainSnapshotPtr has a refcount member, but no one was able
to use it. Furthermore, all of our other vir*Ptr objects have
a *Ref method to match their *Free method. Thankfully, this is
client-side only, so we can use this new function regardless of
how old the server side is! (I have future patches to virsh
that want to use it.)
* include/libvirt/libvirt.h.in (virDomainSnapshotRef): Declare.
* src/libvirt.c (virDomainSnapshotRef): Implement it.
* src/libvirt_public.syms (LIBVIRT_0.9.13): Export it.
Add a VIR_ERR_DOMAIN_LAST sentinel for virErrorDomain and
replace the virErrorDomainName function by a VIR_ENUM_IMPL
In the process the naming of error domains is sanitized
* src/util/virterror.c: Use VIR_ENUM_IMPL for converting
error domains to strings
* include/libvirt/virterror.h: Add VIR_ERR_DOMAIN_LAST
This patch adds support for a new storage backend with RBD support.
RBD is the RADOS Block Device and is part of the Ceph distributed storage
system.
It comes in two flavours: Qemu-RBD and Kernel RBD, this storage backend only
supports Qemu-RBD, thus limiting the use of this storage driver to Qemu only.
To function this backend relies on librbd and librados being present on the
local system.
The backend also supports Cephx authentication for safe authentication with
the Ceph cluster.
For storing credentials it uses the built-in secret mechanism of libvirt.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Currently virDomainGetCPUStats gets total cpu usage, which consists
of:
1. vcpu usage: the physical cpu time consumed by virtual cpu(s) of
domain
2. hypervisor: `total cpu usage' - `vcpu usage'
The param 'vcpu_time' is for getting vcpu usages.
This patch introduces a new block job, useful for live storage
migration using pre-copy streaming. Justification for including
this under virDomainBlockRebase rather than adding a new command
includes: 1) there are now two possible block jobs in qemu, with
virDomainBlockRebase starting either type of command, and
virDomainBlockJobInfo and virDomainBlockJobAbort working to end
either type; 2) reusing this command allows distros to backport
this feature to the libvirt 0.9.10 API without a .so bump.
Note that a future patch may add a more powerful interface named
virDomainBlockJobCopy, dedicated to just the block copy job, in
order to expose even more options (such as setting an arbitrary
format type for the destination without having to probe it from a
pre-existing destination file); adding a new command for targetting
just block copy would be similar to how we already have
virDomainBlockPull for targetting just the block pull job.
Using a live VM with the backing chain:
base <- snap1 <- snap2
as the starting point, we have:
- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
VIR_DOMAIN_BLOCK_REBASE_COPY)
creates /path/to/copy with the same format as snap2, with no backing
file, so entire chain is copied and flattened
- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_COPY_RAW)
creates /path/to/copy as a raw file, so entire chain is copied and
flattened
- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_SHALLOW)
creates /path/to/copy with the same format as snap2, but with snap1 as
a backing file, so only snap2 is copied.
- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_REUSE_EXT)
reuse existing /path/to/copy (must have empty contents, and format is
probed[*] from the metadata), and copy the full chain
- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_REUSE_EXT|
VIR_DOMAIN_BLOCK_REBASE_SHALLOW)
reuse existing /path/to/copy (contents must be identical to snap1,
and format is probed[*] from the metadata), and copy only the contents
of snap2
- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_REUSE_EXT|
VIR_DOMAIN_BLOCK_REBASE_SHALLOW|VIR_DOMAIN_BLOCK_REBASE_COPY_RAW)
reuse existing /path/to/copy (must be raw volume with contents
identical to snap1), and copy only the contents of snap2
Less useful combinations:
- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_SHALLOW|
VIR_DOMAIN_BLOCK_REBASE_COPY_RAW)
fail if source is not raw, otherwise create /path/to/copy as raw and
the single file is copied (no chain involved)
- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_REUSE_EXT|
VIR_DOMAIN_BLOCK_REBASE_COPY_RAW)
makes little sense: the destination must be raw but have no contents,
meaning that it is an empty file, so there is nothing to reuse
The other three flags are rejected without VIR_DOMAIN_BLOCK_COPY.
[*] Note that probing an existing file for its format can be a security
risk _if_ there is a possibility that the existing file is 'raw', in
which case the guest can manipulate the file to appear like some other
format. But, by virtue of the VIR_DOMAIN_BLOCK_REBASE_COPY_RAW flag,
it is possible to avoid probing of raw files, at which point, probing
of any remaining file type is no longer a security risk.
It would be nice if we could issue an event when pivoting from phase 1
to phase 2, but qemu hasn't implemented that, and we would have to poll
in order to synthesize it ourselves. Meanwhile, qemu will give us a
distinct job info and completion event when we either cancel or pivot
to end the job. Pivoting is accomplished via the new:
virDomainBlockJobAbort(dom, disk, VIR_DOMAIN_BLOCK_JOB_ABORT_PIVOT)
Management applications can pre-create the copy with a relative
backing file name, and use the VIR_DOMAIN_BLOCK_REBASE_REUSE_EXT
flag to have qemu reuse the metadata; if the management application
also copies the backing files to a new location, this can be used
to perform live storage migration of an entire backing chain.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_JOB_TYPE_COPY):
New block job type.
(virDomainBlockJobAbortFlags, virDomainBlockRebaseFlags): New enums.
* src/libvirt.c (virDomainBlockRebase): Document the new flags,
and implement general restrictions on flag combinations.
(virDomainBlockJobAbort): Document the new flag.
(virDomainSaveFlags, virDomainSnapshotCreateXML)
(virDomainRevertToSnapshot, virDomainDetachDeviceFlags): Document
restrictions.
* include/libvirt/virterror.h (VIR_ERR_BLOCK_COPY_ACTIVE): New
error.
* src/util/virterror.c (virErrorMsg): Define it.
DBus connection. The HAL device code further requires that
the DBus connection is integrated with the event loop and
provides such glue logic itself.
The forthcoming FirewallD integration also requires a
dbus connection with event loop integration. Thus we need
to pull the current event loop glue out of the HAL driver.
Thus we create src/util/virdbus.{c,h} files. This contains
just one method virDBusGetSystemBus() which obtains a handle
to the single shared system bus instance, with event glue
automagically setup.
Block job cancellation can take a while. Now that upstream qemu 1.1
has asynchronous block cancellation, we want to expose that to the user.
Therefore, the following updates are made to the virDomainBlockJob API:
A new block job event type VIR_DOMAIN_BLOCK_JOB_CANCELED is managed by
libvirt. Regardless of the flags used with virDomainBlockJobAbort, this
event will be raised: 1. when using synchronous block_job_cancel (the
event will be synthesized by libvirt), and 2. whenever it is received
from qemu (via asynchronous block-job-cancel). Note that the event
may be detected by libvirt even before the virDomainBlockJobAbort
completes (always true when it is synthesized, but also possible if
cancellation was fast).
A new extension flag VIR_DOMAIN_BLOCK_JOB_ABORT_ASYNC is added to the
virDomainBlockJobAbort API. When enabled, this function will allow
(but not require) asynchronous operation (ie, it returns as soon as
possible, which might be before the job has actually been canceled).
When the API is used in this mode, it is the responsibility of the
caller to wait for a VIR_DOMAIN_BLOCK_JOB_CANCELED event or poll via
the virDomainGetBlockJobInfo API to check the cancellation status.
This patch also exposes the new flag through virsh, and makes virsh
slightly easier to use (--async implies --abort, and lack of any options
implies --info), although it leaves the qemu implementation for later
patches.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Right now, it is appallingly easy to cause qemu disk snapshots
to alter a domain then fail; for example, by requesting a two-disk
snapshot where the second disk name resides on read-only storage.
In this failure scenario, libvirt reports failure, but modifies
the live domain XML in-place to record that the first disk snapshot
was taken; and places a difficult burden on the management app
to grab the XML and reparse it to see which disks, if any, were
altered by the partial snapshot.
This patch adds a new flag where implementations can request that
the hypervisor make snapshots atomically; either no changes to
XML occur, or all disks were altered as a group. If you request
the flag, you either get outright failure up front, or you take
advantage of hypervisor abilities to make an atomic snapshot. Of
course, drivers should prefer the atomic means even without the
flag explicitly requested.
There's no way to make snapshots 100% bulletproof - even if the
hypervisor does it perfectly atomic, we could run out of memory
during the followup tasks of updating our in-memory XML, and report
a failure. However, these sorts of catastrophic failures are rare
and unlikely, and it is still nicer to know that either all
snapshots happened or none of them, as that is an easier state to
recover from.
* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_CREATE_ATOMIC): New flag.
* src/libvirt.c (virDomainSnapshotCreateXML): Document it.
* tools/virsh.c (cmdSnapshotCreate, cmdSnapshotCreateAs): Expose it.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Document
it.
Recent changes have caused build failures on systems where pdwtags works:
commit a26a196 mistakenly exported a public variable
commits a26a196, 57ddcc2, 487c063 all had copy-paste bugs in
hand-updating the golden API rather than rerunning pdwtags
* include/libvirt/libvirt.h.in (virDomainEventTrayChangeReason):
Make this a typedef, not external storage.
* src/remote_protocol-structs (remote_procedure): Fix spelling.
This introduces a new running reason VIR_DOMAIN_RUNNING_WAKEUP,
and new suspend event type VIR_DOMAIN_EVENT_STARTED_WAKEUP.
While a wakeup event is emitted, the domain which entered into
VIR_DOMAIN_PMSUSPENDED will be transferred to "running"
with reason VIR_DOMAIN_RUNNING_WAKEUP, and a new domain lifecycle
event emitted with type VIR_DOMAIN_EVENT_STARTED_WAKEUP.
This introduces a new domain state pmsuspended to represent
the domain which has been suspended by guest power management,
e.g. (entered itno s3 state). Because a "running" state could
be confused in this case, one will see the guest is paused
actually while playing. And state "paused" is for the domain
which was paused by virDomainSuspend.
This patch introduces a new event type for the QMP event
SUSPEND:
VIR_DOMAIN_EVENT_ID_PMSUSPEND
The event doesn't take any data, but considering there might
be reason for wakeup in future, the callback definition is:
typedef void
(*virConnectDomainEventSuspendCallback)(virConnectPtr conn,
virDomainPtr dom,
int reason,
void *opaque);
"reason" is unused currently, always passes "0".
This patch introduces a new event type for the QMP event
WAKEUP:
VIR_DOMAIN_EVENT_ID_PMWAKEUP
The event doesn't take any data, but considering there might
be reason for wakeup in future, the callback definition is:
typedef void
(*virConnectDomainEventWakeupCallback)(virConnectPtr conn,
virDomainPtr dom,
int reason,
void *opaque);
"reason" is unused currently, always passes "0".
This patch introduces a new event type for the QMP event
DEVICE_TRAY_MOVED, which occurs when the tray of a removable
disk is moved (i.e opened or closed):
VIR_DOMAIN_EVENT_ID_TRAY_CHANGE
The event's data includes the device alias and the reason
for tray status' changing, which indicates why the tray
status was changed. Thus the callback definition for the event
is:
enum {
VIR_DOMAIN_EVENT_TRAY_CHANGE_OPEN = 0,
VIR_DOMAIN_EVENT_TRAY_CHANGE_CLOSE,
\#ifdef VIR_ENUM_SENTINELS
VIR_DOMAIN_EVENT_TRAY_CHANGE_LAST
\#endif
} virDomainEventTrayChangeReason;
typedef void
(*virConnectDomainEventTrayChangeCallback)(virConnectPtr conn,
virDomainPtr dom,
const char *devAlias,
int reason,
void *opaque);
Thanks to cgroups, providing user vs. system time of the overall
guest is easy to add to our existing API.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_CPU_STATS_USERTIME)
(VIR_DOMAIN_CPU_STATS_SYSTEMTIME): New constants.
* src/util/virtypedparam.h (virTypedParameterArrayValidate)
(virTypedParameterAssign): Enforce checking the result.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Fix offender.
(qemuDomainGetTotalcpuStats): Implement new parameters.
* tools/virsh.c (cmdCPUStats): Tweak output accordingly.
Overflow can be user-induced, so it deserves more than being called
an internal error. Note that in general, 32-bit platforms have
far more places to trigger this error (anywhere the public API
used 'unsigned long' but the other side of the connection is a
64-bit server); but some are possible on 64-bit platforms (where
the public API computes the product of two numbers).
* include/libvirt/virterror.h (VIR_ERR_OVERFLOW): New error.
* src/util/virterror.c (virErrorMsg): Translate it.
* src/libvirt.c (virDomainSetVcpusFlags, virDomainGetVcpuPinInfo)
(virDomainGetVcpus, virDomainGetCPUStats): Use it.
* daemon/remote.c (HYPER_TO_TYPE): Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockResize): Likewise.
Qemu supports sizing by bytes; we shouldn't force the user to
round up if they really wanted an unaligned total size.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_RESIZE_BYTES):
New flag.
* src/libvirt.c (virDomainBlockResize): Document it.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockResize): Take
size in bytes.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextBlockResize):
Likewise. Pass bytes, not megabytes, to monitor.
* src/qemu/qemu_driver.c (qemuDomainBlockResize): Implement new
flag.
No thanks to 64-bit windows, with 64-bit pid_t, we have to avoid
constructs like 'int pid'. Our API in libvirt-qemu cannot be
changed without breaking ABI; but then again, libvirt-qemu can
only be used on systems that support UNIX sockets, which rules
out Windows (even if qemu could be compiled there) - so for all
points on the call chain that interact with this API decision,
we require a different variable name to make it clear that we
audited the use for safety.
Adding a syntax-check rule only solves half the battle; anywhere
that uses printf on a pid_t still needs to be converted, but that
will be a separate patch.
* cfg.mk (sc_correct_id_types): New syntax check.
* src/libvirt-qemu.c (virDomainQemuAttach): Document why we didn't
use pid_t for pid, and validate for overflow.
* include/libvirt/libvirt-qemu.h (virDomainQemuAttach): Tweak name
for syntax check.
* src/vmware/vmware_conf.c (vmwareExtractPid): Likewise.
* src/driver.h (virDrvDomainQemuAttach): Likewise.
* tools/virsh.c (cmdQemuAttach): Likewise.
* src/remote/qemu_protocol.x (qemu_domain_attach_args): Likewise.
* src/qemu_protocol-structs (qemu_domain_attach_args): Likewise.
* src/util/cgroup.c (virCgroupPidCode, virCgroupKillInternal):
Likewise.
* src/qemu/qemu_command.c(qemuParseProcFileStrings): Likewise.
(qemuParseCommandLinePid): Use pid_t for pid.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* src/conf/domain_conf.h (_virDomainObj): Likewise.
* src/probes.d (rpc_socket_new): Likewise.
* src/qemu/qemu_command.h (qemuParseCommandLinePid): Likewise.
* src/qemu/qemu_driver.c (qemudGetProcessInfo, qemuDomainAttach):
Likewise.
* src/qemu/qemu_process.c (qemuProcessAttach): Likewise.
* src/qemu/qemu_process.h (qemuProcessAttach): Likewise.
* src/uml/uml_driver.c (umlGetProcessInfo): Likewise.
* src/util/virnetdev.h (virNetDevSetNamespace): Likewise.
* src/util/virnetdev.c (virNetDevSetNamespace): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput): Likewise.
* src/conf/storage_conf.h (_virStoragePerms): Use mode_t, uid_t,
and gid_t rather than int.
* src/security/security_dac.c (virSecurityDACSetOwnership): Likewise.
* src/conf/storage_conf.c (virStorageDefParsePerms): Avoid
compiler warning.
This patch adds a set of flags to be used with the virDomainOpenConsole
API call to specify if the user wishes to interrupt an existing console
session or just to try open a new one.
VIR_DOMAIN_CONSOLE_SAFE - specifies that the console connection should
be opened only if the hypervisor supports
mutually exclusive access to console devices
VIR_DOMAIN_CONSOLE_FORCE - specifies that the caller wishes to interrupt
existing session and force a creation of a
new one.
This patch adds VIR_MIGRATE_UNSAFE flag for migration APIs and new
VIR_ERR_MIGRATION_UNSAFE error code. The error code should be returned
whenever migrating a domain is considered unsafe (e.g., it's configured
in a way that does not ensure data integrity once it is migrated).
VIR_MIGRATE_UNSAFE flag may be used to force migration even though it
would normally be considered unsafe and forbidden.
Unlike .cvsignore under CVS, git allows for ignoring nested
names. We weren't very consistent where new tests were
being ignored (some in .gitignore, some in tests/.gitignore),
and I found it easier to just consolidate everything.
* .gitignore: Subsume entries from subdirectories.
* daemon/.gitignore: Delete.
* docs/.gitignore: Likewise.
* docs/devhelp/.gitignore: Likewise.
* docs/html/.gitignore: Likewise.
* examples/dominfo/.gitignore: Likewise.
* examples/domsuspend/.gitignore: Likewise.
* examples/hellolibvirt/.gitignore: Likewise.
* examples/openauth/.gitignore: Likewise.
* examples/domain-events/events-c/.gitignore: Likewise.
* include/libvirt/.gitignore: Likewise.
* src/.gitignore: Likewise.
* src/esx/.gitignore: Likewise.
* tests/.gitignore: Likewise.
* tools/.gitignore: Likewise.
When libvirt's virDomainDestroy API is shutting down the qemu process,
it first sends SIGTERM, then waits for 1.6 seconds and, if it sees the
process still there, sends a SIGKILL.
There have been reports that this behavior can lead to data loss
because the guest running in qemu doesn't have time to flush its disk
cache buffers before it's unceremoniously whacked.
This patch maintains that default behavior, but provides a new flag
VIR_DOMAIN_DESTROY_GRACEFUL to alter the behavior. If this flag is set
in the call to virDomainDestroyFlags, SIGKILL will never be sent to
the qemu process; instead, if the timeout is reached and the qemu
process still exists, virDomainDestroy will return an error.
Once this patch is in, the recommended method for applications to call
virDomainDestroyFlags will be with VIR_DOMAIN_DESTROY_GRACEFUL
included. If that fails, then the application can decide if and when
to call virDomainDestroyFlags again without
VIR_DOMAIN_DESTROY_GRACEFUL (to force the issue with SIGKILL).
(Note that this does not address the issue of existing applications
that have not yet been modified to use VIR_DOMAIN_DESTROY_GRACEFUL.
That is a separate patch.)
Qemu is adding the ability to do a partial rebase. That is, given:
base <- intermediate <- current
virDomainBlockPull will produce:
current
but qemu now has the ability to leave base in the chain, to produce:
base <- current
Note that current qemu can only do a forward merge, and only with
the current image as the destination, which is fully described by
this API without flags. But in the future, it may be possible to
enhance this API for additional scenarios by using flags:
Merging the current image back into a previous image (that is,
undoing a live snapshot), could be done by passing base as the
destination and flags with a bit requesting a backward merge.
Merging any other part of the image chain, whether forwards (the
backing image contents are pulled into the newer file) or backwards
(the deltas recorded in the newer file are merged back into the
backing file), could also be done by passing a new flag that says
that base should be treated as an XML snippet rather than an
absolute path name, where the XML could then supply the additional
instructions of which part of the image chain is being merged into
any other part.
* include/libvirt/libvirt.h.in (virDomainBlockRebase): New
declaration.
* src/libvirt.c (virDomainBlockRebase): Implement it.
* src/libvirt_public.syms (LIBVIRT_0.9.10): Export it.
* src/driver.h (virDrvDomainBlockRebase): New driver callback.
* src/rpc/gendispatch.pl (long_legacy): Add exemption.
* docs/apibuild.py (long_legacy_functions): Likewise.
This patch adds API to modify domain metadata for running and stopped
domains. The api supports changing description, title as well as the
newly added <metadata> element. The API has support for storing data in
the metadata element using xml namespaces.
* include/libvirt/libvirt.h.in
* src/libvirt_public.syms
- add function headers
- add enum to select metadata to operate on
- export functions
* src/libvirt.c
- add public api implementation
* src/driver.h
- add driver support
* src/remote/remote_driver.c
* src/remote/remote_protocol.x
- wire up the remote protocol
* include/libvirt/virterror.h
* src/util/virterror.c
- add a new error message note that metadata for domain are
missing
We already provide ways to detect when a domain has been paused as a
result of I/O error, but there was no way of getting the exact error or
even the device that experienced it. This new API may be used for both.
Our existing virDomainBlockResize takes an unsigned long long
argument; if that command is later taught a DELTA and SHRINK flag,
we cannot change its type without breaking API (but at least such
a change would be ABI compatible). Meanwhile, the only time a
negative size makes sense is if both DELTA and SHRINK are used
together, but if we keep the argument unsigned, applications can
pass the positive delta amount by which they would like to shrink
the system, and have the flags imply the negative value. So,
since this API has not yet been released, and in the interest of
consistency with existing API, we swap virStorageVolResize to
always pass an unsigned value.
* include/libvirt/libvirt.h.in (virStorageVolResize): Use unsigned
argument.
* src/libvirt.c (virStorageVolResize): Likewise.
* src/driver.h (virDrvStorageVolUpload): Adjust clients.
* src/remote/remote_protocol.x (remote_storage_vol_resize_args):
Likewise.
* src/remote_protocol-structs: Regenerate.
Suggested by Daniel P. Berrange.
The bottom of the public header is reserved for deprecated APIs;
it's nicer to arrange things in logical groups.
* include/libvirt/libvirt.h.in (virConnectSetKeepAlive)
(virDomainGetCPUStats): Float earlier in the file.
add new API virDomainGetCPUStats() for getting cpu accounting information
per real cpus which is used by a domain. The API is designed to allow
future extensions for additional statistics.
based on ideas by Lai Jiangshan and Eric Blake.
* src/libvirt_public.syms: add API for LIBVIRT_0.9.10
* src/libvirt.c: define virDomainGetCPUStats()
* include/libvirt/libvirt.h.in: add virDomainGetCPUStats() header
* src/driver.h: add driver API
* python/generator.py: add python API (as not implemented)
Signed-off-by: Eric Blake <eblake@redhat.com>
This API allows a domain to be put into one of S# ACPI states.
Currently, S3 and S4 are supported. These states are shared
with virNodeSuspendForDuration.
However, for now we don't support any duration other than zero.
The same apply for flags.
Add a new function to allow changing of capacity of storage volumes.
Plan out several flags, even if not all of them will be implemented
up front.
Expose the new command via 'virsh vol-resize'.
Signed-off-by: Eric Blake <eblake@redhat.com>
And hook it up for policykit auth. This allows virt-manager to detect
that the user clicked the policykit 'cancel' button and not throw
an 'authentication failed' error message at the user.
Currently, we support only filling a volume with zeroes on wiping.
However, it is not enough as data might still be readable by
experienced and equipped attacker. Many technical papers have been
written, therefore we should support other wiping algorithms.
Add a new API virDomainShutdownFlags and define:
VIR_DOMAIN_SHUTDOWN_DEFAULT = 0,
VIR_DOMAIN_SHUTDOWN_ACPI_POWER_BTN = (1 << 0),
VIR_DOMAIN_SHUTDOWN_GUEST_AGENT = (1 << 1),
Also define some flags for the reboot API
VIR_DOMAIN_REBOOT_DEFAULT = 0,
VIR_DOMAIN_REBOOT_ACPI_POWER_BTN = (1 << 0),
VIR_DOMAIN_REBOOT_GUEST_AGENT = (1 << 1),
Although these two APIs currently have the same flags, using
separate enums allows them to expand separately in the future.
Add stub impls of the new API for all existing drivers
Although this is a public API break, it only affects users that
were compiling against *_LAST values, and can be trivially
worked around without impacting compilation against older
headers, by the user defining VIR_ENUM_SENTINELS before using
libvirt.h. It is not an ABI break, since enum values do not
appear as .so entry points. Meanwhile, it prevents users from
using non-stable enum values without explicitly acknowledging
the risk of doing so.
See this list discussion:
https://www.redhat.com/archives/libvir-list/2012-January/msg00804.html
* include/libvirt/libvirt.h.in: Hide all sentinels behind
LIBVIRT_ENUM_SENTINELS, and add missing sentinels.
* src/internal.h (VIR_DEPRECATED): Allow inclusion after
libvirt.h.
(LIBVIRT_ENUM_SENTINELS): Expose sentinels internally.
* daemon/libvirtd.h: Use the sentinels.
* src/remote/remote_protocol.x (includes): Don't expose sentinels.
* python/generator.py (enum): Likewise.
* tests/cputest.c (cpuTestCompResStr): Silence compiler warning.
* tools/virsh.c (vshDomainStateReasonToString)
(vshDomainControlStateToString): Likewise.