After this commit, all man pages are generated using the same two
steps:
1. Process a source $command.pod file with pod2man(1) to obtain
a valid man page in $command.$section.in
2. Process $command.$section.in with sed(1) to obtain the final
man page in $command.$section
The values are currently limited to LLONG_MAX which causes some
problems. QEMU conveniently changed their maximum to 1e15 (1 PB) which
is enough for some time and we need to adapt to that so that we don't
throw "Unknown error" messages. Strictly limiting these values actually
fixes some corner case values (off-by-one checks in QEMU probably).
Since values out of the new specified range do not overflow anything,
change the type of error as well.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1317531
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
$ echo -n 'log_level=1' > ~/.config/libvirt/libvirtd.conf
$ libvirtd --timeout=10
2014-10-10 10:30:56.394+0000: 6626: info : libvirt version: 1.1.3.6, package: 1.fc20 (Fedora Project, 2014-09-08-17:50:42, buildvm-05.phx2.fedoraproject.org)
2014-10-10 10:30:56.394+0000: 6626: error : main:1261 : Can't load config file: configuration file syntax error: /home/rjones/.config/libvirt/libvirtd.conf:1: expecting a value: /home/rjones/.config/libvirt/libvirtd.conf
Rather than try to fix this in the depths of the parser, just catch
the case when a config file doesn't end in a newline, and manually
append a newline to the content before parsing
https://bugzilla.redhat.com/show_bug.cgi?id=1151409
According to the dnsmasq manpage, the netmask for IPv4 address ranges
will be auto-deteremined from the interface dnsmasq is listening on,
but it can't do this for IPv6 for some reason - it instead assumes a
network prefix of 64 for all IPv6 address ranges. If this is
incorrect, dnsmasq will refuse to give out an address to clients,
instead logging this message:
dnsmasq-dhcp[2380]: no address range available for DHCPv6 request via virbr0
The solution is for libvirt to add ",$prefix" to all IPv6 dhcp-range
arguments when building the dnsmasq.conf file.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1033739
FreeBSD's sed(1) doesn't support using "\n" to insert a newline,
so the installed default.xml file ends up containing a literal
"n" between tags; to work around this problem, add a tr(1)
invocation as suggested by the sed FAQ[1].
[1] http://sed.sourceforge.net/sedfaq4.html (4.1 c)
The stream serial number is the serial number of the RPC call
that initiated a data transfer. And as such can never be
negative. Moreover, when looking up internal state for a stream,
the serial numbers are compared. But hey, the serial number in
message header is unsigned too!
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
According to the autoconf manual, using '$(LN_S) -f' is not
portable; remove the target explicitly beforehand to work around
this limitation.
Adjust some slightly awkward indentation while at it.
My commit 0d1579572 crashes on a URI without a scheme, like via
'virsh --connect frob'
Add a check on uri->server too while we are at it, and centralize
them all
The current rule fails if the target already exists:
cd /home/jenkins/build/libvirt/lib && \
ln -s libnss_libvirt.so.1 nss_libvirt.so.1
ln: nss_libvirt.so.1: File exists
Makefile:3357: recipe for target 'install-exec-hook' failed
However, all other rules concerned with installation are
idempotent and will happily overwrite an existing target,
so this one should as well.
We don't have input devices in SDK thus for define/dumpxml
operations to be consistent we need to:
1. on dumpxml: infer input devices from other parts of config.
It is already done in prlsdkLoadDomain.
2. on define: check that input devices are the same that
will be infer back on dumpxml operation.
The second part should be fixed.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Remove all the plumbing needed for the different qcow-create/kvm-img
non-raw file creation.
We can drop the error messages because CreateQemuImg will thrown an
error for us but with slightly less fidelity (unable to find qemu-img),
which I think is acceptable given the unlikeliness of that error in
practice.
This an ubuntu/debian packaging convention. At one point it may have
been an actually different binary, but at least as of ubuntu precise
(the oldest supported ubuntu distro, released april 2012) kvm-img is
just a symlink to qemu-img for back compat.
I think it's safe to drop support for it
qcow-create was a crippled qemu-img impl that shipped with xen. I
think supporting this was only relevant for really old distros
that didn't have a proper qemu package, like early RHEL5. I think
it's fair to drop support
VIR_ERR_NO_SUPPORT maps to the error string
this function is not supported by the connection driver
and is largely only used for when a driver doesn't have any
implementation for a public API. So its usage with invalid
net-update requests is a bit out of place. Instead use
VIR_ERR_OPERATION_UNSUPPORTED which maps to:
Operation not supported
And is what qemu's hotplug routines use in similar scenarios
QEMU introduced the query-gic-capabilities QMP command
with commit 4468d4e0f383: use the command, if available,
to probe available GIC capabilities.
The information obtained is stored in a virQEMUCaps
instance, and will be later used to fill in a
virDomainCaps instance.
The struct contains a single boolean field, 'supported':
the meaning of this field is too generic to be limited to
devices only, and in fact it's already being used for
other things like loaders and OSs.
Instead of trying to come up with a more generic name just
get rid of the struct altogether.
libvirt handles empty source as NULL, while vz sdk as
"" thus we need a bit of conversion.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Current implementation does not detect all incompatible configurations.
For example if we have in vzsdk bootorder "cdrom1, cdrom0" (that is
"hdb, hda" in case of ide cdroms) and cdroms do not have disk
images inserted. In this case boot order check code fails to
distiguish them at all as for both PrlVmDev_GetFriendlyName gives "".
Well the consequences are only missing warnings but as
we just have introduced all the necessary tools to face the problem -
let's fix it.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Actually using disk PrlVmDev_GetFriendlyName as id on
detaching volumes is not a problem. We can only detach
hard disks and these can not have empty friendly names.
But upcoming update device functionality for cdroms
can not use disk source as id at all as update operation
typically change this same source value. Thus we will need
to use cdrom bus and cdrom target name as cdrom id. So in attempt
to use same id scheme for all purpuses lets fix hard disk
detach function to use new id.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Our intention is to use disk bus and disk target name pair
as disk id instead of name returned by PrlVmDev_GetFriendlyName.
We already have the code that extracts this pair from vzsdk
data. Let's factor it out into a function.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Prior to this patch we didn't make any attempt to prevent two entries
in the array of interfaces/PCI devices from pointing to the same
device.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1002423
The common idiom in the driver API implementations is roughly:
- ACL check
- BeginJob (if needed)
- AgentAvailable (if needed)
- !IsActive
A few calls had an extra !IsActive before BeginJob, which doesn't
seem to serve much use. Drop them
It isn't implemented and does not work:
error: internal error: guest failed to start: /usr/lib/libvirt/libvirt_lxc: option '--veth' requires an argument
syntax: /usr/lib/libvirt/libvirt_lxc [OPTIONS] ...
We previously threw an explicit error, but this changed in
22cff52a2b , which I suspect was
untested for LXC
So in glibc-2.23 sys/sysmacros.h is no longer included from sys/types.h
and we don't build because of the usage of major/minor/makedev macros.
Autoconf already has AC_HEADER_MAJOR macro that check where exactly
these functions/macros are defined, so let's use that.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
These API already support VIR_DOMAIN_AFFECT_* flags. But the
documentation does not mention it. Eww.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since threadpool increments the current number of threads according to current
load, i.e. how many jobs are waiting in the queue. The count however, is
constrained by max and min limits of workers. The logic of this new API works
like this:
1) setting the minimum
a) When the limit is increased, depending on the current number of
threads, new threads are possibly spawned if the current number of
threads is less than the new minimum limit
b) Decreasing the minimum limit has no possible effect on the current
number of threads
2) setting the maximum
a) Icreasing the maximum limit has no immediate effect on the current
number of threads, it only allows the threadpool to spawn more
threads when new jobs, that would otherwise end up queued, arrive.
b) Decreasing the maximum limit may affect the current number of
threads, if the current number of threads is less than the new
maximum limit. Since there may be some ongoing time-consuming jobs
that would effectively block this API from killing any threads.
Therefore, this API is asynchronous with best-effort execution,
i.e. the necessary number of workers will be terminated once they
finish their previous job, unless other workers had already
terminated, decreasing the limit to the requested value.
3) setting priority workers
- both increase and decrease in count of these workers have an
immediate impact on the current number of workers, new ones will be
spawned or some of them get terminated respectively.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
New API to retrieve current server workerpool specs. Since it uses typed
parameters, more specs to retrieve can be further included in the pool of
supported ones.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
In order for the client to see all thread counts and limits, current total
and free worker count getters need to be introduced. Client might also be
interested in the job queue length, so provide a getter for that too. As with
the other getters, preparing for the admin interface, mutual exclusion is used
within all getters.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
So far, the values the affected getters retrieve are static, i.e. there's no
way of changing them during runtime. But admin interface will later enable
not only getting but changing them as well. So to prevent phenomenons like
torn reads or concurrent reads and writes of unaligned values, use mutual
exclusion when getting these values (writes do, understandably, use them
already).
Signed-off-by: Erik Skultety <eskultet@redhat.com>
When either creating a threadpool, or creating a new thread to accomplish a job
that had been placed into the jobqueue, every time thread-specific data need to
be allocated, threadpool needs to be (re)-allocated and thread count indicators
updated. Make the code clearer to read by compressing these operations into a
more complex one.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
virTypedParamsValidate currently uses an index based check to find
duplicate parameters. This check does not work. Consider the following
simple example:
We have only 2 keys
A (multiples allowed)
B (multiples NOT allowed)
We are given the following list of parameters to check:
A
A
B
If you work through the validation loop you will see that our last iteration
through the loop has i=2 and j=1. In this case, i > j and keys[j].value.i will
indicate that multiples are not allowed. Both conditionals are satisfied so
an incorrect error will be given: "parameter '%s' occurs multiple times"
This patch replaces the index based check with code that remembers
the name of the last parameter seen and only triggers the error case if
the current parameter name equals the last one. This works because the
list is sorted and duplicate parameters will be grouped together.
In reality, we hit this bug while using selective block migration to migrate
a guest with 5 disks. 5 was apparently just the right number to push i > j
and hit this bug.
virsh migrate --live guestname --copy-storage-all
--migrate-disks vdb,vdc,vdd,vde,vdf
qemu+ssh://dsthost/system
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Migration API allows to specify a destination domain configuration.
Offline domain has only inactive XML and it is replaced by configuration
specified using VIR_MIGRATE_PARAM_DEST_XML param. In case of live
migration VIR_MIGRATE_PARAM_DEST_XML param is applied for active XML.
This commit introduces the new VIR_MIGRATE_PARAM_PERSIST_XML param
that can be used within live migration to replace persistent/inactive
configuration.
Required for: https://bugzilla.redhat.com/show_bug.cgi?id=835300
By default, `zfs create -V ...` reserves space for the entire volsize,
plus some extra (which attempts to account for overhead).
If `zfs create -s -V ...` is used instead, zvols are (fully) sparse.
A middle ground (partial allocation) can be achieved with
`zfs create -s -o refreservation=... -V ...`. Both libvirt and ZFS
support this approach, so the ZFS storage backend should support it.
Signed-off-by: Richard Laager <rlaager@wiktel.com>
Commit id '4b75237f' seems to have triggered Coverity into finding
at least one memory leak in xen_xl.c for error path for cleanup where
the listenAddr would be leaked. Reviewing other callers, it seems that
qemu_parse_command.c would have the same issue, so just it too.
To ensure the libvirt libxl driver will build with future versions
of Xen where the libxl API may change in incompatible ways,
explicitly use LIBXL_API_VERSION 0x040200. The libxl driver
does use new libxl APIs that have been added since Xen 4.2, but
currently it does not make use of any changes made to existing
APIs such as libxl_domain_create_restore or libxl_set_vcpuaffinity.
The version can be bumped if/when the libxl driver consumes the
changed APIs.
Further details can be found in the following discussion thread
https://www.redhat.com/archives/libvir-list/2016-April/msg00178.html
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
When creating the master key, we used mode 0600 (which we should) but
because we were creating it as root, the file is not readable by any
qemu running as non-root. Fortunately, it's just a matter of labelling
the file. We are generating the file path few times already, so let's
label it in the same function that has access to the path already.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In a few places in libvirt we busy-wait for events, for example qemu
creating a monitor socket. This is problematic because:
- We need to choose a sufficiently small polling period so that
libvirt doesn't add unnecessary delays.
- We need to choose a sufficiently large polling period so that
the effect of busy-waiting doesn't affect the system.
The solution to this conflict is to use an exponential backoff.
This patch adds two functions to hide the details, and modifies a few
places where we currently busy-wait.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
In case of ploop volume, target path of the volume is the path to the
directory that contains image file named root.hds and DiskDescriptor.xml.
While using uploadVol and downloadVol callbacks we need to open root.hds
itself.
Upload or download operations with ploop volume are only allowed when
images do not have snapshots. Otherwise operation fails.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Refreshes meta-information such as allocation, capacity, format, etc.
Ploop volumes differ from other volume types. Path to volume is the path
to directory with image file root.hds and DiskDescriptor.xml.
https://openvz.org/Ploop/format
Due to this fact, operations of opening the volume have to be done once
again. get the information.
To decide whether the given volume is ploops one, it is necessary to check
the presence of root.hds and DiskDescriptor.xml files in volumes' directory.
Only in this case the volume can be manipulated as the ploops one.
Such strategy helps us to resolve problems that might occure, when we
upload some other volume type from ploop source.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Recursively deletes whole directory of a ploop volume.
To delete ploop image it has to be unmounted.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
These callbacks let us to create ploop volumes in dir, fs and etc. pools.
If a ploop volume was created via buildVol callback, then this volume
is an empty ploop device with DiskDescriptor.xml.
If the volume was created via .buildFrom - then its content is similar to
input volume content.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Ploop image consists of directory with two files: ploop image itself,
called root.hds and DiskDescriptor.xml that contains information about
ploop device: https://openvz.org/Ploop/format.
Such volume are difficult to manipulate in terms of existing volume types
because they are neither a single files nor a directory.
This patch introduces new volume type - ploop. This volume type is used
by ploop volume's exclusively.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Rather than trying some magic calculations on our side query the monitor
for the current size of the memory balloon both on hotplug and
hotunplug.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1220702
Now that there is just one format of the memory balloon command line
used the code can be merged into a single function.
Additionally with some tweaks to the control flow the code is easier to
read.
The change that made qemu not add the memballoon by default happened
prior to 0.12.0. Additionaly the comment was misleading due to the code
that was added below. Since we always need to add a balloon on the
commandline drop the comment.
The only caller of this code is:
for (i = 0; i < dom->def->ngraphics; i++) {
if (dom->def->graphics[i]->type == VIR_DOMAIN_GRAPHICS_TYPE_SPICE) {
if (!(mig->graphics =
qemuMigrationCookieGraphicsAlloc(driver, dom->def->graphics[i])))
return -1;
mig->flags |= QEMU_MIGRATION_COOKIE_GRAPHICS;
break;
}
}
So this is never triggered for VNC, and in fact VNC has no support for
seamless migration anyways so that seems correct. Drop the dead VNC
handling.
Since vz driver is now lives as a part of daemon we can benefit from
this fact and allow vz clients to use shared drivers API like storage,
network, nwfilter etc.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
This is backed by the qemu device pxb-pcie, which will be available in
qemu 2.6.0.
As with pci-expander-bus (which uses qemu's pxb device), the busNr
attribute and <node> subelement of <target> are used to set the bus_nr
and numa_node options.
During post-parse we validate that the domain's machinetype is
q35-based (since the device shows up for 440fx-based machinetypes, but
is unusable), as well as checking that <node> specifies a node that is
actually configured on the guest.
This controller provides a single PCIe port on a new root. It is
similar to pci-expander-bus, intended to provide a bus that can be
associated with a guest-identifiable NUMA node, but is for
machinetypes with PCIe rather than PCI (e.g. q35-based machinetypes).
Aside from PCIe vs. PCI, the other main difference is that a
pci-expander-bus has a companion pci-bridge that is automatically
attached along with it, but pcie-expander-bus has only a single port,
and that port will only connect to a pcie-root-port, or to a
pcie-switch-upstream-port. In order for the bus to be of any use in
the guest, it must have either a pcie-root-port or a
pcie-switch-upstream-port attached (and one or more
pcie-switch-downstream-ports attached to the
pcie-switch-upstream-port).
The pxb device is a PCIe expander bus that can be added to any
Q35-based machinetype. A single PCIe port (*not* hotpluggable) is
provided; if more than one device is desired, or if hotplug
support is needed, either a pcie-root-port, or some combination of
pcie-switch-upstream-port and pcie-swith-downstream-ports must be
added to it. It can have a NUMA node number associated with it, as
well as a bus number.
This is backed by the qemu device "pxb".
The pxb device always includes a pci-bridge that is at the bus number
of the pxb + 1.
busNr and <node> from the <target> subelement are used to set the
bus_nr and numa_node options for pxb.
During post-parse we validate that the domain's machinetype is
440fx-based (since the pxb device only works on 440fx-based machines),
and <node> also gets a sanity check to assure that the NUMA node
specified for the pxb (if any - it's optional) actually exists on the
guest.
This is a standard PCI root bus (not a bridge) that can be added to a
440fx-based domain. Although it uses a PCI slot, this is *not* how it
is connected into the PCI bus hierarchy, but is only used for
control. Each pci-expander-bus provides 32 slots (0-31) that can
accept hotplug of standard PCI devices.
The usefulness of pci-expander-bus relative to a pci-bridge is that
the NUMA node of the bus can be specified with the <node> subelement
of <target>. This gives guest-side visibility to the NUMA node of
attached devices (presuming that management apps only assign a device
to a bus that has a NUMA node number matching the node number of the
device on the host).
Each pci-expander-bus also has a "busNr" attribute. The expander-bus
itself will take the busNr specified, and all buses that are connected
to this bus (including the pci-bridge that is automatically added to
any expander bus of model "pxb" (see the next commit)) will use
busNr+1, busNr+2, etc, and the pci-root (or the expander-bus with next
lower busNr) will use bus numbers lower than busNr.
The pxb device is a PCI expander bus that can be added to any
440fx-based machinetype. The PCI bus that is created has 32 standard
PCI slots (hotpluggable). It can have a NUMA node number associated
with it, as well as a bus number.
There are two places in qemu_domain_address.c where we have a switch
statement to convert PCI controller models
(VIR_DOMAIN_CONTROLLER_MODEL_PCI*) into the connection type flag that
is matched when looking for an upstream connection for that model of
controller (VIR_PCI_CONNECT_TYPE_*). This patch makes a utility
function in conf/domain_addr.c to do that, so that when a new PCI
controller is added, we only need to add the new model-->connect-type
in a single place.
The flags used to determine which devices could be plugged into which
controllers were quite confusing, as they tried to create classes of
connections, then put particular devices into possibly multiple
classes, while sometimes setting multiple flags for the controllers
themselves. The attempt to have a single flag indicate, e.g. that a
root-port or a switch-downstream-port could connect was not only
confusing, it was leading to a situation where it would be impossible
to specify exactly the right combinations for a new controller.
The solution is for the VIR_PCI_CONNECT_TYPE_* flags to have a 1:1
correspondence with each type of PCI controller, plus a flag for a PCI
endpoint device and another for a PCIe endpoint device (the only
exception to this is that pci-bridge and pcie-expander-bus controllers
have their upstream connection classified as
VIR_PCI_CONNECT_TYPE_PCI_DEVICE since they can be plugged into
*exactly* the same ports as any endpoint device). Each device then
has a single flag for connect type (plus the HOTPLUG flag if that
device can e hotplugged), and each controller sets the CONNECT bits
for all controllers that can be plugged into it, as well as for either
type of endpoint device that can be plugged in (and the HOTPLUG flag
if it can accept hotplugged devices).
With this change, it is *slightly* easier to understand the matching
of connections (as long as you remember that the flag for a
device/upstream-facing connection of a controller is the same as that
device's type, while the flags for a controller's downstream
connections is the OR of all device types that can be plugged into
that controller). More importantly, it will be possible to correctly
specify what can be plugged into a pcie-switch-expander-bus, when
support for it is added.
When support for dmi-to-pci-bridge was added, it was assumed that,
just as with the pci-root bus, slot 0 was reserved. This is not the
case - it can be used to connect a device just like any other slot, so
remove the restriction and update the test cases that auto-assign an
address on a dmi-to-pci-bridge.
Every other maxSlot was either set to 0 or to
VIR_PCI_ADDRESS_SLOT_LAST, but this one was for some reason set to the
literal value 31 (which is the same as VIR_PCI_ADDRESS_SLOT_LAST).
This makes them all consistent.
We use device-mapper to enumerate all dm devices, and filter out
the list of multipath devices by checking the target_type string
name. The code however cancels all scanning if we encounter
target_type=NULL
I don't know how to reproduce that situation, but a user was hitting
it in their setup, and inspecting the lvm2/device-mapper code shows
many places where !target_type is explicitly ignored and processing
continues on to the next device. So I think we should do the same
https://bugzilla.redhat.com/show_bug.cgi?id=1069317
The watchdog cli refactoring in 4666b762 dropped the temporary variable
we use to convert to action=dump to action=pause for the qemu cli, and
stored the converted value in the domain structure. Our other watchdog
handling code then treated it as though the user requested action=pause,
which broke action=dump handling.
Revive the temporary variable to fix things.
I tried compiling libvirt with older gcc and probably because I used
different configure options I got some shadowed declarations.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Add codes to support creating domain with network defition of assigning
SRIOV VF from a pool.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
commit 30c61901 added new functions to libvirt_private.syms
not alpabetically sorted and erroneously added vz sources to
STATEFUL_DRIVER_SOURCE_FILES, which triggered check-aclrules
running while vz driver isn't ready for it yet.
Pushing under build-breaker rule.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
SDK does not allocate memory when getting strings thus we
need to call every function that returns string twice.
First to obtain string length, second to obtain string
itself. It is tedious so let's create helper functions
for cases when we know length of the result beforehand
and we are not.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
remove unnecessary vzConnectClose prototype and make
local structure vzDomainDefParserConfig be static
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
We don't need them anymore as all pointers within vzDriver structure
are not changed during the time it exists.
Where we still need to synchronize we use virObjectLock/Unlock as far
as vzDriver is lockable object.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Lock driver when a new domain is created in prlsdkNewDomainByHandle
and try to find it in the list under lock again because it can race
with vzDomainDefineXMLFlags when a domain with the same uuid is added
via vz dispatcher directly and libvirt define.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
This patch introduces a new 'vzDriver' lockable object and provides
helper functions to allocate/destroy it and we pass it to prlsdkXxx
functions instead of virConnectPtr.
Now we store domain related objects such as domain list, capabitilies
etc. within a single vz_driver vzDriver structure, which is shared by
all driver connections. It is allocated during daemon initialization or
in a lazy manner when a new connection to 'vz' driver is established.
When a connection to vz daemon drops, vzDestroyConnection is called,
which in turn relays disconnect event to all connection to 'vz' driver.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Make it possible to build vz driver as a module and don't link it with
libvirt.so statically.
Remove registering it on client's side as far as we start relying on daemon
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
GCC in RHEL-6 complains about listen:
../../src/conf/domain_conf.c:23718: error: declaration of 'listen' shadows a global declaration [-Wshadow]
/usr/include/sys/socket.h:204: error: shadowed declaration is here [-Wshadow]
This renames all the listen to gListen.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Trying to reload/SIGUSR1 virtlogd or virtlockd fails with:
error : virNetDaemonRun:747 : internal error: Not all servers restored, cannot run server
Commit 252610f7 changed the daemon state json to allow tracking
multiple servers. However it missed clearing dmn->srvObject after
the json is empty, like the previous code paths handled. Later on in
virNewDaemonRun, dmn->srvObject is expected to be empty otherwise we
throw the above error.
https://bugzilla.redhat.com/show_bug.cgi?id=1311013
Since qemu is now able to notify us that the guest rejected the memory
unplug operation we can relay this to the user and make the API fail
right away.
Additionally document the possible values from the ACPI docs for future
reference.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1320447
The event is emitted on ACPI OSPM Status Indication events.
ACPI standard documentation describes the method as:
This object is an optional control method that is invoked by OSPM to
indicate processing status to the platform. During device ejection,
device hot add, or other event processing, OSPM may need to perform
specific handshaking with the platform. OSPM may also need to indicate
to the platform its inability to complete a requested operation; for
example, when a user presses an ejection button for a device that is
currently in use or is otherwise currently incapable of being ejected.
In this case, the processing of the ACPI Eject Request notification by
OSPM fails. OSPM may indicate this failure to the platform through the
invocation of the _OST control method. As a result of the status
notification indicating ejection failure, the platform may take certain
action including reissuing the notification or perhaps turning on an
appropriate indicator light to signal the failure to the user.
Since we didn't opt to use one single event for device lifecycle for a
VM we are missing one last event if the device removal failed. This
event will be emitted once we asked to eject the device but for some
reason it is not possible.
Similarly to the DEVICE_DELETED event we will be able to tell when
unplug of certain device types will be rejected by the guest OS. Wire up
the device deletion signalling code to allow handling this.
Neither of the callers cares whether the DEVICE_DELETED event isn't
supported or the event was received. Simplify the code and callers by
unifying the two values and changing the return value constants so that
a temporary variable can be omitted.
Callers ignore if this function returns -1 and continue as though the
DEVICE_DELETED event was not received. Since we can't be sure that the
event was not received we should behave as if the event was not
supported and remove the device definition right away. The error
fortunately won't really happen here.
The address assigning code might add new pci bridges.
We need them to have an alias when building the command line.
In real word usage, this is not a problem because all the code
paths already call qemuDomainAssignAddresses. However moving
this call lets us remove one extra call from qemuxml2argvtest.
Essentially revert commit 3a6204c which added these to allow the test
suite to pass without depending on the host system state.
Since commit 4b527c1 we already mock virSCSIDeviceGetSgName, so these
callbacks are useless.
Instead of calling the virDomainGraphicsListensParseXML function for all
graphics types and ignore the wrong ones move the call only to graphics
types where we supports listen elements.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Those are the last two places that uses the getter functions. Use a
direct access instead and remove those getters.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Removes the check for graphics type, it's not a public API and developer
know what he's doing and this check makes no sense. It also removes
the ability to allocate a new array if there is none. This was used by
the virDomainGraphicsListenAdd* functions and isn't used anymore.
This is now a simple getter with simple check for listens array presence
and whether the index in out of bounds.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This effectively removes virDomainGraphicsListenSetAddress which was
used only to change the address of listen structure and possible change
the listen type. The new function will auto-expand the listens array
and append a new listen.
The old function was used on pre-allocated array of listens and in most
cases it only "add" a new listen. The two remaining uses can access the
listen structure directly.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Rest of the fields of the iotune data structure did not check for
malformed integers. Use the previously defined macro to extract them
which will simplify the code and add error reporting.
Since the structure was pre-initialized to 0 we don't need to set every
single member to 0 if it's not present in the XML. Additionally if we
put the name of the field into the error message the code can be
simplified using a macro to parse the members.
No need to remember connection name and have corresponding
domain type to keep backward compatibility with former
'parallels' driver. It is enough to be able to accept 'parallels'
uri and domain types.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
we don't need to allocate macstr at all as it is an array
and already has the the space it needs.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
If we encounter a video device with primary=yes, we insert it
at def->videos[0].
There is no need to record this in a separate variable,
just check if there already is a primary video at def->videos[0].
We call VIR_INSERT_ELEMENT_INPLACE either with 0 (for primary video)
or def->nvideos (for the rest).
Use a variable with more semantic name, since j is usually used
for iterating.
We start with both i and def->nvideos at 0 and increment both
after every successful iteration.
Use i directly, instead of passing the def->nvideos value through j.
Commit 119cd06 started setting the primary bool for the first
user-specified video even if user omitted the 'primary' attribute.
However this was done before the addition of the implicit device.
This broke startup of transient qemu domains with no <video>:
https://bugzilla.redhat.com/show_bug.cgi?id=1325757
Move this default to virDomainDefPostParseInternal,
after the addition of the implicit video device, to catch the implicit
video as well.
Quite straigthforward as vz sdk memory setting function makes
just what we want to that is set "amount of physical memory
allocated to a domain".
'useflags' is introduced for non flag function implementation.
We can't just use combination of flags like "live | config" or
we fail for inactive domains. Other combinations have drawbacks
too.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Actually this is not pure refactoring. Part of common code is
replaced with virDomainObjUpdateModificationImpact and this
a good replacement. It includes removed check of inactive
domain and active flags set. Additionally we resolve
current flag in accordance with current state of domain.
Thus it becames possible to attach/detach devices for
inactive domains if this flag is set.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Commit dc98a5bc refactored the code a lot and forget about checking if
listen attribute is specified. This ensures that listen attribute and
first listen element are compared only if both exist.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
fdstream.c: In function 'virFDStreamWrite':
fdstream.c:390:29: error: logical 'or' of equal expressions [-Werror=logical-op]
if (errno == EAGAIN || errno == EWOULDBLOCK) {
^~
Fedora rawhide now uses gcc 6.0 and there is a bug with -Wlogical-op
producing false warnings.
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69602
Use GCC pragma push/pop and ignore -Wlogical-op for GCC that supports
push/pop pragma and also has this bug.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Replace the nonsensical debug statement by adding the expected event
code into the existing debug statement.
Since the monitor code always notifies the agent on guest
reboot/shutdown even if that was not initiated by the agent the warning
emitted later is bogus and pollutes the logs in such cases. Delete it
and keep just the original debug message where this info can be
inferred.
Move including of gnutls/gnutls.h in qemu/qemu_domain.c under the
"ifdef WITH_GNUTLS" check because otherwise it fails like this:
CC qemu/libvirt_driver_qemu_impl_la-qemu_domain.lo
qemu/qemu_domain.c:50:10: fatal error: 'gnutls/gnutls.h' file not found
in case if gnutls is not installed on the system.
Some places already check for "virt-" prefix as well as plain "virt".
virQEMUCapsHasPCIMultiBus did not, resulting in multiple PCI devices
having assigned the same unnumbered "pci" alias.
Add a test for the "virt-2.6" machine type which also omits the
<model type='virtio'/> in <interface>, to check if
qemuDomainDefaultNetModel works too.
https://bugzilla.redhat.com/show_bug.cgi?id=1325085
virSocketAddrFormat() wants a single pointer, not a double pointer.
Fixes the following compilation error on FreeBSD:
util/virnetdev.c:1448:72: error: incompatible pointer types passing
'virSocketAddr **' to parameter of type 'const virSocketAddr *';
remove & [-Werror,-Wincompatible-pointer-types]
if (VIR_SOCKET_ADDR_VALID(peer) && !(peerstr = virSocketAddrFormat(&peer)))
^~~~~
./util/virsocketaddr.h:92:48: note: passing argument to parameter 'addr' here
char *virSocketAddrFormat(const virSocketAddr *addr);
^
FreeBSD lacks ENODATA, and viruuid.c redefines it to EIO, but it's not
actually using it. On the other hand, we have virrandom.c that's using
ENODATA. So make this re-definition common by moving it to internal.h,
so all the current and possible future users don't need to care about
that.
In the latest libxenlight code, libxl_domain_create_restore accepts a
new argument. Update libvirt's libxl driver for that. Use the macro
provided by libxenlight to detect which version should be used.
The new parameter (send_back_fd) is set to -1 because libvirt provides
no such fd.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Message-id: 1459866012-27081-1-git-send-email-wei.liu2@citrix.com
Our use of gnutls_rnd(), introduced with commit ad7520e8, is
conditional to the availability of the <gnutls/crypto.h> header
file.
Such check, however, turns out not to be strict enough, as there
are some versions of GnuTLS (eg. 2.8.5 from CentOS 6) that provide
the header file, but not the function itself, which was introduced
only in GnuTLS 2.12.0.
Introduce an explicit check for the function.
As usual we try to deal correctly with vz domains that were
created by other means and thus can have all range of SDK domain
parameters. If vz domain boot order can't be represented
in libvirt os boot section let's give warning and make os boot section
represent SDK to some extent.
1. Os boot section supports up to 4 boot devices. Here we just
cut SDK boot order up to this limit. Not too bad.
2. If there is a floppy in boot order let's just skip it.
Anyway we don't show it in the xml. Not too bad too.
3. SDK boot order with unsupported disks order. Say we have "hdb, hda" in
SDK. We can not present this thru os boot order. Well let's just
give warning but leave double <boot dev='hd'/> in xml. It's
kind of misleading but we warn you!
SDK boot order have an extra parameters 'inUse' and 'sequenceIndex'
which makes our task more complicated. In realitly however 'inUse'
is always on and 'sequenceIndex' is not less than 'boot position index'
which simplifies out task back again! To be on a safe side let's explicitly
check for this conditions!
We have another exercise here. We want to check for unrepresentable
condition 3 (see above). The tricky part is that in contrast to
domains defined thru this driver 3-rd party defined domains can
have device ordering different from default. Thus we need
some id to check that N-th boot disk of os boot section is same as
N-th boot disk of SDK boot. This is what prlsdkBootOrderCheck
for. It uses disks sources paths as id for disks and iface names
for network devices.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
We want to report boot order in dumpxml for vz domains.
Thus we want disks devices to be sorted in output compatible with boot
ordering specification. So let's just use virDomainDiskInsert
which makes appropriate sorting.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
The patch makes some refactoring of the existing code. Current boot order spec code
makes very simple thing in somewhat obscure way. In case of VMs
it sets the first hdd as the only bootable device. In case of CTs it
doesn't touch the boot order at all if one of the filesystems is mounted to root.
Otherwise like in case of VMs it sets the first hdd as the only bootable
device and additionally sets this device mount point to root. Refactored
code makes all this explicit.
The actual boot order support is simple. Common libvirt domain xml parsing
code makes the exact ordering of disks devices as described in docs
for boot ordering (disks are sorted by bus order first, device target
second. Bus order is the order of disk buses appearence in original
xml. Device targets order is alphabetical). We add devices in the
same order and SDK designates device indexes sequentially for each
device type. Thus device index is equal to its boot index. For
example N-th cdrom in boot specification refers to sdk cdrom with
it's device index N.
If there is no boot spec in xml the parsing code will add <boot dev='hdd'>
for HVMs automatically and we backward compatibly set fist hdd as
bootable.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
The new perf code didn't bother to clear a pointer in 'priv' causing a
double free or other memory corruption goodness if a VM failed to start.
Clear the pointer after freeing the memory.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1324757
For device hotplug, the new alias ID needs to be checked in the list
rather than using the count of devices. Unplugging a device that is not
last in the array will make further hotplug impossible due to alias
collision.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1324551
For device hotplug, the new alias ID needs to be checked in the list
rather than using the count of devices. Unplugging a device that is not
last in the array will make further hotplug impossible due to alias
collision.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1324551
Commit id 'fb2bd208' essentially copied the qemuGetSecretString
creating an libxlGetSecretString. Rather than have multiple copies
of the same code, create src/secret/secret_util.{c,h} files and
place the common function in there.
Modify the the build in order to build the module as a library
which is then pulled in by both the qemu and libxl drivers for
usage from both qemu_command.c and libxl_conf.c
If the -object secret capability exists, then get the path to the
masterKey file and provide that to qemu. Checking for the existence
of the file before passing to qemu could be done, but causes issues
in mock test environment.
Since the qemuDomainObjPrivate is not available when building the
command line, the qemuBuildHasMasterKey API will have to suffice
as the primary arbiter for whether the capability exists in order
to find/return the path to the master key for usage.
Created the qemuDomainGetMasterKeyAlias API which will be used by
later patches to define the 'keyid' (eg, masterKey) to be used by
other secrets to provide the id to qemu for the master key.
Add a masterKey and masterKeyLen to _qemuDomainObjPrivate to store a
random domain master key and its length in order to support the ability
to encrypt/decrypt sensitive data shared between libvirt and qemu. The
key will be base64 encoded and written to a file to be used by the
command line building code to share with qemu.
New API's from this patch:
qemuDomainGetMasterKeyFilePath:
Return a path to where the key is located
qemuDomainWriteMasterKeyFile: (private)
Open (create/trunc) the masterKey path and write the masterKey
qemuDomainMasterKeyReadFile:
Using the master key path, open/read the file, and store the
masterKey and masterKeyLen. Expected use only from qemuProcessReconnect
qemuDomainGenerateRandomKey: (private)
Generate a random key using available algorithms
The key is generated either from the gnutls_rnd function if it
exists or a less cryptographically strong mechanism using
virGenerateRandomBytes
qemuDomainMasterKeyRemove:
Remove traces of the master key, remove the *KeyFilePath
qemuDomainMasterKeyCreate:
Generate the domain master key and save the key in the location
returned by qemuDomainGetMasterKeyFilePath.
This API will first ensure the QEMU_CAPS_OBJECT_SECRET is set
in the capabilities. If not, then there's no need to generate
the secret or file.
The creation of the key will be attempted from qemuProcessPrepareHost
once the libDir directory structure exists.
The removal of the key will handled from qemuProcessStop just prior
to deleting the libDir tree.
Since the key will not be written out to the domain object XML file,
the qemuProcessReconnect will read the saved file and restore the
masterKey and masterKeyLen.
Using the existing virUUIDGenerateRandomBytes, move API to virrandom.c
rename it to virRandomBytes and add it to libvirt_private.syms.
This will be used as a fallback for generating a domain master key.
Add a capability bit for the qemu secret object.
Adjust the 2.6.0-1 caps/replies to add the secret object. For the
.replies it's take from the '{"execute":"qom-list-types"}' output.
When a hostdev is attached to the guest (and removed from the host),
the order of operations is call qemuHostdevPreparePCIDevices to remove
the device from the host, call qemuSetupHostdevCgroup to setup the cgroups,
and virSecurityManagerSetHostdevLabel to set the labels.
When the device is removed from the guest, the code didn't use the
reverse order leading to possible issues (especially if the path to
the device no longer exists). This patch will move the call to
qemuTeardownHostdevCgroup to prior to reattaching the device to
the host.
When a hostdev is attached to the guest (and removed from the host),
the order of operations is call qemuHostdevPreparePCIDevices to remove
the device from the host, call qemuSetupHostdevCgroup to setup the cgroups,
and virSecurityManagerSetHostdevLabel to set the labels.
When the device is removed from the guest, the code didn't use the
reverse order leading to possible issues (especially if the path to
the device no longer exists). This patch will move the call to
virSecurityManagerRestoreHostdevLabel to prior to reattaching the
device to the host.
Commit id '3992ff14' added the prototype for networkGetActualType
with 1 parameter, but added 2 ATTRIBUTE_NONNULL's (assume from a
cut-n-paste), just remove (2).
Commit d77ffb6876 added not only reporting of the PCI header type, but
also parsing of that information. However, because there was no parsing
done for the other sub-PCI capabilities, if there was any other
capability then a valid header type name (like phys_function or
virt_functions) the parsing would fail. This prevented passing node
device XMLs that we generated into our own functions when dealing with,
e.g. with SRIOV cards.
Instead of reworking the whole parsing, just fix this one occurence and
remove a test for it for the time being. Future patches will deal with
the rest.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Starting with commit f8e712fe, if you start a domain that has an
<interface type='hostdev' (or that has <interface type='network'>
where the network is a pool of devices for hostdev assignment), when
you later try to add *another* interface (of any kind) with hotplug,
the function qemuAssignDeviceNetAlias() fails as soon as it sees a
"hostdevN" alias in the list of interfaces), causing the attach to
fail.
This is because (starting with f8e712fe) the device alias names are
assigned during the new function qemuProcessPrepareDomain(), which is
called *before* networkAllocateActualDevice() (which is called from
qemuProcessPrepareHost(), which is called from
qemuProcessLaunch()). Prior to that commit,
networkAllocateActualDevice() was called first.
The problem with this is that the alias for interfaces that are really
a hostdev (<interface type='hostdev'>) is of the form "hostdevN" (just
like other hostdevs), while other interfaces are "netN". But if you
don't know that the interface is going to be a hostdev at the time you
assign the alias name, you can't name it differently. (As far as I've
seen so far, the change in name by itself wouldn't have been a problem
(other than just an outwardly noticeable change in behavior) except
for the abovementioned failure to attach/detach new interfaces.
Rather than take the chance that there may be other not-yet-revealed
problems associated with changing the alias name, this patch changes
the way that aliases are assigned to restore the old behavior.
Old: In the past, assigning an alias to an interface was skipped if it
was seen that the interface was type='hostdev' - we knew that the
hostdev part of the interface was also in the list of hostdevs (that's
part of what happens in networkAllocateActualDevice()) and it would be
assigned when all the other hostdev aliases were assigned.
New: When assigning an alias to an interface, we haven't yet called
networkAllocateActualDevice() to construct the hostdev part of the
interface, so we can't just wait for the loop that creates aliases for
all the hostdevs (there's nothing on that list for this device
yet!). Instead we handle it immediately in the loop creating interface
aliases, by calling the new function networkGetActualType() to
determine if it is going to be hostdev, and if so calling
qemuAssignDeviceHostdevAlias() instead.
Some adjustments have to be made to both
qemuAssignDeviceHostdevAlias() and to qemuAssignDeviceNetAlias() to
accommodate this. In both of them, an error return from
qemuDomainDeviceAliasIndex() is no longer considered an error; instead
it's just ignored (because it almost certainly means that the alias
string for the device was "net" when we expected "hostdev" or vice
versa). in qemuAssignDeviceHostdevAlias() we have to look at all
interface aliases for hostdevN in addition to looking at all hostdev
aliases (this wasn't necessary in the past, because both the interface
entry and the hostdev entry for the device already pointed at the
device info; no longer the case since the hostdev entry hasn't yet
been setup).
Fortunately the buggy behavior hasn't yet been in any official release
of libvirt.
In certain cases, we need to assign a hostdevN-style alias in a case
when we don't have a virDomainHostdevDefPtr (instead we have a
virDomainNetDefPtr). Since qemuAssignDeviceHostdevAlias() doesn't use
anything in the virDomainHostdevDef except the alias string itself
anyway, this patch just changes the arguments to pass a pointer to the
alias pointer instead.
There are times when it's necessary to learn the actual type of a
network connection before any resources have been allocated
(e.g. during qemuProcessPrepareDomain()), but in the past it was
necessary to call networkAllocateActualDevice() in order to have the
actual type filled in.
This new function returns the type of network that *will be* setup
once it actually happens, but without making any changes on the host.
The paths have the domain ID in them. Without cleaning them, they would
contain the same ID even after multiple restarts. That could cause
various problems, e.g. with access.
Add function qemuDomainClearPrivatePaths() for this as a counterpart of
qemuDomainSetPrivatePaths().
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The directory name changed in a89f05ba8d.
This unbreaks launching QEMU/KVM VMs with apparmor enabled. It also adds
the directory for the qemu guest-agent socket which is not known when
parsing the domain XML.
This reverts commit ee4cfb5643.
Since we're still not persisting our bookkeeping lists across
daemon restarts, we might have lost some information
virPCIDeviceReattach() relies on, for example whether the
device needs to be unbound from the stub driver.
As a result, if the daemon has been restarted in the meantime,
the device might end up remaining bound to the stub driver even
after 'virsh nodedev-reattach' or similar has been called, with
no way of giving it back to the host short of messing with
sysfs behind libvirt's back.
Revert back to the previous behavior of always trying to bind
the device to the host driver, regardless of its status when it
was detached, until persistent bookkeeping lists have been
implemented.
Commit 08cc14f moved the conversion of MiB/s to B/s out of the
qemuMonitor APIs, but forgot to adjust the qemuMigrationDriveMirror
caller.
This patch will convert the migrate_speed value from MiB/s to its
mirror_speed equivalent in bytes/s.
Signed-off-by: Rudy Zhang <rudyflyzhang@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
@flags have a valid modification impact only after calling
virDomainObjUpdateModificationImpact. virDomainObjGetOneDef calls it but
doesn't update them in the caller.
Chunyan sent a nice cleanup patch for libxlDomainDetachNetDevice
https://www.redhat.com/archives/libvir-list/2016-March/msg00926.html
which I incorrectly modified before pushing as commit b5534e53. My
modification caused network devices of type hostdev to no longer
be removed. This patch changes b5534e53 to resemble Chunyan's
original, correct patch.
Chunyan sent a correct patch to fix a resource leak on error in
libxlDomainAttachNetDevice
https://www.redhat.com/archives/libvir-list/2016-March/msg00924.html
I made what was thought to be an improvement and pushed the patch as
commit e6336442. As it turns out, my change broke adding net devices
that are actually hostdevs to the list of nets in virDomainDef. This
patch changes e6336442 to resemble Chunyan's original, correct
patch.
Compilation for xdg-app failed due to a buggy SASL headers present on
the used runtime (org.gnome.Sdk 3.18).
In file included from rpc/virnetsaslcontext.h:24:0,
from rpc/virnetsaslcontext.c:25:
/usr/include/sasl/sasl.h:230:38: error: unknown type name 'size_t'
typedef void *sasl_realloc_t(void *, size_t);
^
/usr/include/sasl/sasl.h:235:5: error: unknown type name 'sasl_realloc_t'
sasl_realloc_t *,
Use the same workaround as commit 1be3dfd did.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
We use _LAST items in enums to mark the last position in given
enum. Now, if and enum is passed to switch(), compiler checks
that all the values from enum occur in 'case' enumeration.
Including _LAST. But coverity spots it's a dead code. And it
really is. So to resolve this, we tend to put a comment just
above 'case ..._LAST' notifying coverity that we know this is a
dead code but we want to have it that way.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Do I really need to explain why?
Well, if read() is interrupted int the middle of reading, we will
never read the rest (even though it's highly unlikely as we are
reading just 8 bytes).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Even though we have the machine locked throughout whole APIs we
are querying/modifying domain internal state. We should grab a
job whilst doing that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have @flags we can support changing perf events just
in active or inactive configuration regardless of the other.
Previously, calling virDomainSetPerfEvents set events in both
active and inactive configuration at once. Even though we allow
users to set perf events that are to be enabled once domain is
started up. The virDomainGetPerfEvents API was flawed too. It
returned just runtime info.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I've noticed that these APIs are missing @flags argument. Even
though we don't have a use for them, it's our policy that every
new API must have @flags.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
They recently were extracted to a separate function. They don't belong
together though. Since -numa formatting is pretty compact, move it to
the main function and rename qemuBuildNumaCommandLine to
qemuBuildMemoryDeviceCommandLine.
When starting up a VM libvirtd asks numad to place the VM in case of
automatic nodeset. The nodeset would not be passed to the memory device
formatter and the user would get an error.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1269715
Commit 7068b56c introduced several hyperv features. Not all hyperv
features are supported by old enough kernels and we shouldn't allow to
start a guest if kernel doesn't support any of the hyperv feature.
There is one exception, for backward compatibility we cannot error out
if one of the RELAXED, VAPIC or SPINLOCKS isn't supported, for the same
reason we ignore invtsc, to not break restoring saved domains with older
libvirt.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This check is there to allow restore saved domain with older libvirt
where we included invtsc by default for host-passthrough model. Don't
skip the whole function, but only the part that checks for invtsc.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Remove disabling domain death events from libxlDomainStart error
path. The domain death event is already disabled in libxlDomainCleanup.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
libxlDomainStart allocates and reserves resources that were not
being released in error paths. libxlDomainCleanup already handles
the job of releasing resources, and libxlDomainStart should call
it when encountering a failure.
Change the error handling logic to call libxlDomainCleanup on
failure. This includes acquiring the lease sooner and allowing
it to be released in libxlDomainCleanup on failure, similar to
the way other resources are reclaimed. With the lease now
released in libxlDomainCleanup, the release_dom label can be
renamed to cleanup_dom to better reflect its changed semantics.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Create a bitmap of iothreads that have scheduler info set so that the
transformation algorithm does not have to iterate the empty bitmap many
times. By reusing self-expanding bitmaps the bitmap size does not need
to be pre-calculated.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1264008
In some cases it's impractical to use the regular APIs as the bitmap
size needs to be pre-declared. These new APIs allow to use bitmaps that
self expand.
The new code adds a property to the bitmap to track the allocation of
memory so that VIR_RESIZE_N can be used.
Since commit v1.3.2-119-g1e34a8f which enabled debug-threads in QEMU
qemuGetProcessInfo would fail to parse stats for any thread with a space
in its name.
https://bugzilla.redhat.com/show_bug.cgi?id=1316803
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemu won't ever add those functions directly to QMP. They will be
replaced with 'blockdev-add' and 'blockdev-del' eventually. At this time
there's no need to keep the stubs around.
Additionally the drive_del stub in JSON contained dead code in the
attempt to report errors. (VIR_ERR_OPERATION_UNSUPPORTED was never
reported). Since the text impl does have the same message it is reported
anyways.
This patch adds new xml element, and so we can have the option of
also having perf events enabled immediately at startup.
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-6-git-send-email-qiaowei.ren@intel.com
This patch implement a set of interfaces for perf event. Based on
these interfaces, we can implement internal driver API for perf,
and get the results of perf conuter you care about.
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-4-git-send-email-qiaowei.ren@intel.com
API agreed on in
https://www.redhat.com/archives/libvir-list/2015-October/msg00872.html
* include/libvirt/libvirt-domain.h (virDomainGetPerfEvents,
virDomainSetPerfEvents): New declarations.
* src/libvirt_public.syms: Export new symbols.
* src/driver-hypervisor.h (virDrvDomainGetPerfEvents,
virDrvDomainSetPerfEvents): New typedefs.
* src/libvirt-domain.c: Implement virDomainGetPerfEvents and
virDomainSetPerfEvents.
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-2-git-send-email-qiaowei.ren@intel.com
If the pool creation thread happens to detect the luns in
the scsi target, the size parameters will be calculated as
part of the refreshPool called from storagePoolCreate().
This means the virStoragePoolFCRefreshThread (commit id
'512b874') waiting to run and "refresh" the pool will
essentially double the allocation and capacity values.
A separate refresh would correct the values.
To avoid this, the FCRefreshThread needs to reinitialize
the pool size values prior to calling virStorageBackendSCSIFindLUs
which eventually calls virStorageBackendSCSINewLun and
updates the size values for each volume found.
After the recent commits the build didn't work for me. Fix it by
using size_t as the callback argument is using and the correct
formatter. The attempted fixup to use %llu as a formatter was wrong.
Commit e6336442 changed the 'out:' label to 'cleanup' in
libxlDomainAttachNetDevice(), but missed a comment referencing
the 'out:' label. Remove it from the comment since it is no
longer accurate anyhow.
This patch adds support for "vpindex", "runtime", "synic",
"stimer", and "vendor_id" features available in qemu 2.5+.
- When Hyper-V "vpindex" is on, guest can use MSR HV_X64_MSR_VP_INDEX
to get virtual processor ID.
- Hyper-V "runtime" enlightement feature allows to use MSR
HV_X64_MSR_VP_RUNTIME to get the time the virtual processor consumes
running guest code, as well as the time the hypervisor spends running
code on behalf of that guest.
- Hyper-V "synic" stands for Synthetic Interrupt Controller, which is
lapic extension controlled via MSRs.
- Hyper-V "stimer" switches on Hyper-V SynIC timers MSR's support.
Guest can setup and use fired by host events (SynIC interrupt and
appropriate timer expiration message) as guest clock events
- Hyper-V "reset" allows guest to reset VM.
- Hyper-V "vendor_id" exposes hypervisor vendor id to guest.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
1. All hyperv features are tristate ones. So make tristate generating part common.
2. Reduce nesting on spinlocks.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
1. All hyperv features are tristate ones. So make tristate parsing code common.
2. Reindent switch statement.
3. Reduce nesting in spinlocks parsing.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
After the patches that added tracking of in-use macvtap names (commit
370608, first appearing in libvirt-1.3.2), if the function to allocate
a new macvtap device came to a device name created outside libvirt, it
would retry the same device name MACVLAN_MAX_ID (8191) times before
finally giving up in failure.
The problem was that virBitmapNextClearBit was always being called
with "0" rather than the value most recently checked (which would
increment each time through the loop), so it would always return the
same id (since we dutifully release that id after failing to create a
new device using it).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1321546
Signed-off-by: Laine Stump <laine@laine.org>
For those VF allocated from a network pool, we need to set its backend
to be VIR_DOMAIN_HOSTDEV_PCI_BACKEND_XEN so that later work can be
correct.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
This reverts commit bb5f2dc91f.
The "if (vol->target.format != VIR_STORAGE_FILE_RAW)" check in the
createVol backend. This check is bogus because virStorageVolDefParseXML()
in conf/storage_conf.c sets target.format only if volOptions in
virStoragePoolTypeInfo has formatFromString set, and that's not the
case the zfs backend.
So the check always fails and breaks volume creation.
This reverts commit 6682d6219d.
The "if (vol->target.format != VIR_STORAGE_FILE_RAW)" check in the
createVol backend. This check is bogus because virStorageVolDefParseXML()
in conf/storage_conf.c sets target.format only if volOptions in
virStoragePoolTypeInfo has formatFromString set, and that's not the
case the logical backend.
So the check always fails and breaks volume creation.
When hostdev parent is network device, should call
libxlDomainDetachNetDevice to detach the device from a higher level.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
When AttachNetDevice failed, should call networkReleaseActualDevice
to release actual device, and if actual device is hostdev, should
remove the hostdev from vm->def->hostdevs.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
networkStartNetwork() and networkShutdownNetwork() were calling the
wrong type-specific function in the case of networks that were
configured for macvtap ("direct") bridge mode - they were instead
calling the functions for a tap+bridge network. Currently none of
these functions does anything (they just return 0) so it hasn't
created any problems, but that could change in the future.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1316465
An attempt to simplify the code for the VIR_NETWORK_FORWARD_BRIDGE
case of networkUpdateState in commit b61db335 (first in release
1.2.14) resulted in networks based on macvtap bridge mode being
erroneously marked as inactive any time libvirtd was restarted.
The problem is that the original code had differentiated between a
network using tap devices to connect to an existing host-bridge device
(forward mode of VIR_NETWORK_FORWARD_BRIDGE and a non-NULL
def->bridge), and one using macvtap bridge mode to connect to any
ethernet device (still forward mode VIR_NETWORK_FORWARD_BRIDGE, but
null def->bridge), but the changed code assumed that all networks with
VIR_NETWORK_FORWARD_BRIDGE were tap + host-bridge networks, so a null
def->bridge was interpreted as "inactive".
This patch restores the original code in networkUpdateState
The adminDispatchConnectListServers() function is generated by
our great perl script. However, it has a tiny flaw: if
adminConnectListServers() it calls fails, the control jumps onto
cleanup label where we try to free any list of servers built so
far. However, in the loop @i is unsigned (size_t) while @nresults
is signed (int). Currently, it does no harm because of the check
for @result being non-NULL. But if that ever changes in the
future, this bug will be hard to chase.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If a user specify network type ethernet, then create it via libvirt and run
script if it provided. After this commit user does not need to
run external script to create tap device or add root permissions to qemu
process.
Signed-off-by: Vasiliy Tolstov <v.tolstov@selfip.ru>
Instead of forcing the values for the unbind_from_stub, remove_slot
and reprobe properties, look up the actual device and use that when
calling virPCIDeviceReattach().
This ensures the device is restored to its original state after
reattach: for example, if it was not bound to any driver before
detach, it will not be bound forcefully during reattach.
We would be just fine looking up the information in pcidevs most
of the time; however, some corner cases would not be handled
properly, so look up the actual device instead.
After this patch, ownership of virPCIDevice instances is very easy
to keep track of: for each host PCI device, the only instance that
actually matters is the one inside one of the bookkeeping list.
Whenever some operation needs to be performed on a PCI device, the
actual device is looked up first; when this is not the case, a
comment explains the reason.
Unmanaged devices, as the name suggests, are not detached
automatically from the host by libvirt before being attached to a
guest: it's the user's responsability to detach them manually
beforehand. If that preliminary step has not been performed, the
attach operation can't complete successfully.
Instead of relying on the lower layers to error out with cryptic
messages such as
error: Failed to attach device from /tmp/hostdev.xml
error: Path '/dev/vfio/12' is not accessible: No such file or directory
prevent the situation altogether and provide the user with a more
useful error message.
Unmanaged devices are attached to guests in two steps: first,
the device is detached from the host and marked as inactive;
subsequently, it is marked as active and attached to the guest.
If the daemon is restarted between these two operations, we lose
track of the inactive device.
Steps 5 and 6 of virHostdevPreparePCIDevices() already subtly
take care of this situation, but some planned changes will make
it so that's no longer the case. Plus, explicit is always better
than implicit.
This will skip few steps from qemuProcessStart in order to create only
qemu CMD. Use a VIR_QEMU_PROCESS_START_PRETEND for all the qemuProcess*
functions called by this one to not modify or check host.
This new function will be used later on for XMLToNative API and also for
qemuxml2argvtest to make sure that both API and test uses the same code
as qemuProcessStart.
We need also update qemuProcessInit to wrap few lines of code with check
that VIR_QEMU_PROCESS_START_PRETEND that makes sense only for
qemuProcessStart.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Move all code that checks host and domain. Do not check host if we use
VIR_QEMU_PROCESS_START_PRETEND flag.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Move all code that modifies only live XML to this function. The new
VIR_QEMU_PROCESS_START_PRETEND flag will be used by qemuXMLToNative and
qemuxml2argvtest later in order to reuse the same code as
qemuProcessStart uses.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The postParse callback is the correct place to generate default values
that should be present in offline XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
QEMU changed the error message to:
"Tray of device 'drive-sata0-0-1' is not open"
and they may change the error massage in the future.
This updates the code to not depend on the text from the error message
but only on error itself.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When reading in an XML definition for a SCSI target device, the name
property of struct scsi_target refers to the @target element.
Let's fix this obvious typo and also extend the XML schema to provide
validation.
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Until now, the libxl driver ignored any <hap> setting in domain XML
and deferred to libxl, which enables hap if not specified. While
this is a good default, it prevents disabling hap if desired.
This change allows disabling hap with <hap state='off'/>. hap is
explicitly enabled with <hap/> or <hap state='on/>. Absense of <hap>
retains current behavior of deferring default state to libxl.
hap is enabled by default in xm and xl config and usually only
specified when it is desirable to disable hap (hap = 0). Change
the xm,xl <-> xml converter to behave similarly. I.e. only
produce 'hap = 0' when <hap state='off'/> and vice versa.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Most hypervisors use Hardware Assisted Paging by default and don't
require specifying the feature in domain conf. But some hypervisors
support disabling HAP on a per-domain basis. To enable HAP by default
yet provide a knob to disable it, extend the <hap> feature with a
'state=on|off' attribute, similar to <pvspinlock> and <vmport> features.
In the absence of <hap>, the hypervisor default (on) is used. <hap>
without the state attribute would be the same as <hap state='on'/> for
backwards compatibility. And of course <hap state='off'/> disables hap.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The function already takes two bool arguments, switching to flags makes
it a lot easier to read. Especially in case we need to add another
boolean in the future.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In post-copy mode none of the hosts has a complete guest state and
rolling back migration is impossible. Thus aborting it would be
equivalent to destroying the domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When migration fails in the post-copy mode, it's impossible to just kill
the destination domain and resume the source since the source no longer
contains current guest state. Let's mark domains on both sides as
VIR_DOMAIN_PAUSED_POSTCOPY_FAILED to let the upper layer decide what to
do with them.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When destination libvirtd is restarted during migration in Finish phase
just after the point we started guest CPUs, we should not kill the
domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Migration enters "postcopy-active" state after QEMU switches to
post-copy and pauses guest CPUs. From libvirt's point of view this state
is similar to "completed" because we need to transfer guest execution to
the destination host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
To use post-copy one has to start the migration with
VIR_MIGRATE_POSTCOPY flag and, while migration is in progress, call
virDomainMigrateStartPostCopy() to switch from pre-copy to post-copy.
Signed-off-by: Cristian Klein <cristiklein@gmail.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
VIR_DOMAIN_EVENT_SUSPENDED_POSTCOPY and VIR_DOMAIN_PAUSED_POSTCOPY are
used on the source host once migration enters post-copy mode (which
means the domain gets paused on the source. After the destination host
takes over the execution of the domain, its virtual CPUs are resumed and
the domain enters VIR_DOMAIN_RUNNING_POSTCOPY state and
VIR_DOMAIN_EVENT_RESUMED_POSTCOPY event is emitted.
In case migration fails during post-copy mode and none of the hosts have
complete state of the domain, both domains will remain paused with
VIR_DOMAIN_PAUSED_POSTCOPY_FAILED reason and an upper layer may decide
what to do.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This allows setting the address in host and/or network order and makes
the naming consistent. Now you don't need to call [hn]to[nh]l()
functions as that is taken care of by these functions. Also, now
the *NetOrder take the address in network order, the other functions in
host order so the naming and usage is consistent. Some places were
having the address in network order and calling ntohl() just so the
original function can call htonl() again. This makes it nicer to read.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If a <graphics type='spice'> has no port nor tlsPort set, the generated
QEMU command line will contain -spice port=0.
This is later going to be ignored by spice-server, but it's better not
to add it at all in this situation.
As an empty -spice is not allowed, we still need to append port=0 if we
did not add any other argument.
The end goal is to avoid adding -spice port=0,addr=127.0.0.1 to QEMU command
line when no SPICE port is specified in libvirt XML.
Currently, the code relies on port=xx to always be present, so subsequent
args can be unconditionally appended with a leading ','. Since port=0
will no longer be added in a subsequent commit, we append a ',' to every
arg instead of prepending, and remove the last one before adding it to
the arg list.
It's just a combination of AddImplicitControllers, and AddConsoleCompat.
Every caller that wants ImplicitControllers also wants the ConsoleCompat
AFAICT, so lump them together. We also need it for future patches.
Judging by how the whitelist has skewed quite far from the original
error message, I think it's better to just drop these.
If someone wants to revive this check I suggest implementing it on
a per-HV driver basis with PostParse callbacks.
If we expose this information, which is one byte in every PCI config
file, we let all mgmt apps know whether the device itself is an endpoint
or not so it's easier for them to decide whether such device can be
passed through into a VM (endpoint) or not (*-bridge).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1317531
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Best viewed with '-w' as this is just an adjustment for future patch to
be readable without that.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The implementation is pretty straightforward. Moreover, because
of the nature of things, gethostbyname_r and gethostbyname2_r can
be implemented at the same time too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is a missing counterpart for virSocketAddrSetIPv4Addr()
and is going to be needed later in the tests.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This function is going to be used later in such context where the
argument makes no sense. Teach this function to cope with that
instead of the caller having to deal with passing some dummy
argument.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
These functions are going to be reused very shortly. So instead
of duplicating the code, lets move them into utils module.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit id '4f846170' added printing of a new field 'part_separator';
however, neglected to do so when there was an "freeExtent" defined
for the device (as there would be when the disk pool was started).
This patch adjusts the logic to appropriately format the device path and
if there the part_separator attribute.
Commit 'ef2ab8fd' moved just the virDomainConfNWFilterTeardown and left
the logic to save/restore the current error essentially doing nothing
in the error path for qemuBuildCommandLine. So move it to where it
was meant to be.
Although the original code would reset the filter on command creation
errors after building the network command portion and commit 'ef2ab8fd'
altered that logic, the teardown is called during qemuProcessStop from
virDomainConfVMNWFilterTeardown and that code has the save/restore
last error logic, so just allow that code to handle the teardown rather
than running it twice. The qemuProcessStop would be called in the failure
path of qemuBuildCommandLine.
We include the file in plenty of places. This is mostly due to
historical reasons. The only place that needs something from the
header file is storage_backend_fs which opens _PATH_MOUNTED. But
it gets the file included indirectly via mntent.h. At no other
place in our code we need _PATH_.*. Drop the include and
configure check then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Missing modules is a common expected scenario for most libvirt usage on
RPM distributions like Fedora, so it doesn't really warrant logging at
WARN level. Use INFO instead
https://bugzilla.redhat.com/show_bug.cgi?id=1274849
It does not have a suffix ByName because there are no other means of
looking up the server and since the name is known, this should be the
preferred one.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Mostly it is just passing new parameter here and there. In case
of zero value we fallback to auto selecting port and thus keep
backward compatibility.
Also we need to fix places of auto selected port managment.
We should bother only when auto selected was done that is
when externally specified port is not 0.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1271183
We only wait 0.5 seconds for the session daemon to start up and present
its socket, which isn't sufficient for many users. Bump up the sleep
interval and retry amount so we wait for a total of 5.0 seconds.
Refactor series 0b231195 worked with virLogDestination type which, depending
on the compiler, might be (and probably will be) an unsigned data type.
However, virEnumFromString may return -1 in case of an error. So, when enum
happens to be unsigned, some compilers will naturally complain about foo:
'if (foo < 0)'
Each version of virtuozzo supports only one type of SCSI controller
So if we add disk on SCSI bus, we should set SCSI controller model.
We can take it from vzCapabilities structure.
Because Vz6 supports SCSI(BUSLOGIC), IDE and SATA controllers only and
Vz7 supports SCSI(VIRTIO_SCSI) and IDE only we add list of supported
controllers and scsi models to vzCapabilities structure.
When a new connection opens, we select proper capabilities values according
to Virtuozzo version and check them in XMLPostParse.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
We should report correct disk format depending on vz version and domain type.
Since we support only one disk format for each domain type, we can take it
from vzCapabilities structure.
As long as we have another function checking disk parameters correctness,
let's have them in one place. Here we change prefix of the moved function and
start to call it from vzCheckUnsupportedDisks rather than add disk.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
As far as Virtuozzo6 and Virtuozzo7 support different disk types for virtual
machines (ploop and qcow2 respectively) and different buses (vz6: IDE, SCSI,
SATA; vz7: IDE SCSI) we add vzCapabilities structure to help undestand which
disk formats and buses are supported in the context of a current connection.
When a new connection opens, we select proper capabilities in accordance to
current Virtuozzo version.
The problem with the original virLogParseOutputs method was that the way it
parsed the input, walking the string char by char and using absolute jumps
depending on the virLogDestination type, was rather complicated to read.
This patch utilizes virStringSplit method twice, first time to filter out any
spaces and split the input to individual log outputs and then for each
individual output to tokenize it by to the parts according to our
PRIORITY:DESTINATION?(:DATA) format. Also, to STREQLEN for matching destination
was replaced with virDestinationTypeFromString call.
In order to refactor the ugly virLogParseOutputs method, this is a neat way of
finding out whether the destination type (in the form of a string) user
provided is a valid one. As a bonus, if it turns out it is valid, we get the
actual enum which will later be passed to any of virLogAddOutput methods right
away.
Just a cleanup I stumbled upon in one of my older branches I did when
browsing through some code and forgot to send it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In qemuConnectDomainXMLToNative() we set up the monitor, but we never
memset() it to zeros. Thanks to the introduction of the logfile
parameter of chardevs (and the logfile member of the struct), we started
checking whether that's non-NULL and that exposed this old error.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reverting to a snapshot may change domain configuration. New
configuration should be saved if domain has persistent flag.
VIR_DOMAIN_EVENT_DEFINED_FROM_SNAPSHOT is emitted in case of
configuration update.
Add new function to manage adding the panic device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the NVRAM device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the RNG device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also modify the qemuBuildRNGDevStr to use const virDomainDef instead
of virDomainDefPtr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the memballoon device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also modify the qemuBuildMemballoonDevStr to use const virDomainDef
instead of virDomainDefPtr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the host device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also modify qemuBuildPCIHostdevDevStr, qemuBuildUSBHostdevDevStr,
and qemuBuildSCSIHostdevDevStr to use const virDomainDef instead
of virDomainDefPtr.
Make qemuBuildPCIHostdevPCIDevStr and qemuBuildUSBHostdevUSBDevStr
static to the qemu_command.c.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the redirdev device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also move the qemuBuildRedirdevDevStr closer to the new function and
modify to use the const virDomainDef instead of virDomainDefPtr
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the watchdog device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also since qemuBuildWatchdogDevStr was only local here, make it static as
well as modifying the const virDomainDef.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the sound device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also since qemuBuildSoundDevStr was only local here, make it static as
well as modifying the const virDomainDef.
Signed-off-by: John Ferlan <jferlan@redhat.com>
These comments explain the difference between a virPCIDevice
instance used for lookups and an actual device instance; some
information is also provided for specific uses.
virHostdevGetPCIHostDeviceList() is similar but does not filter out
devices that are not in the active list; that said, we are looking
up the device in the active list just a few lines after anyway, so
we might as well just keep a single function around.
This also helps stress the fact the objects contained in pcidevs are
only for looking up the actual devices, which is something later
commits will make even more explicit.
We're in the hostdev module, so mgr is not an ambiguous name, and
in fact it's already used in some cases. Switch all the code over.
Take the chance to shorten declaration of
virHostdevIsPCINodeDeviceUsedData structures.
When we want to look up a device in a device list and we already
have the IDs from another source, we can simply use
virPCIDeviceListFindByIDs() instead of creating a temporary device
object.
If 'last_processed_hostdev_vf != -1' is false then, since the
loop counter 'i' starts at 0, 'i <= last_processed_hostdev_vf'
can't possibly be true and the loop body will never be executed.
However, since 'i' is unsigned and 'last_processed_hostdev_vf'
is signed, we can't just get rid of the check completely; what
we can do is move it outside of the loop to avoid checking its
value on every iteration and cluttering the actual loop
condition.
Since commit 9c14a9ab we have broken active domain listing
because reworked prlsdkLoadDomain doesn't set dom->def->id
propely. It just looses it when a new def structure is set.
Now we make prlsdkConvertDomainState function return void
and move calling it after an old dom->def is replaces with
a new one within prlsdkLoadDomain function.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
This function can be called over a domain definition that has no
video configured. The
tests/qemuxml2argvdata/qemuxml2argv-minimal.xml file could serve
as an example. Problem is, before the check that domain has some
or none video configured, def->videos is dereferenced causing a
segmentation fault in case there's none video configured.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add new function to manage adding the video device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the input device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Make qemuBuildUSBInputDevStr static since only this module calls it.
Also the change to use const virDomainDef forces other changes.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Modify the argument order and types to match other similar helpers.
Also modify called functions to use the def->emulator instead of passing
def->emulator and def.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the console device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the channel device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the parallels device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Alter logic slight to reduce indention level.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the serial device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Using const virDomainDef causes collateral damage in other called APIs
which need to make the similar adjustment
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the smartcard device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Alter the logic slightly to make !nsmartcards check first so that remainder
of the code is less indented.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Let's call it modern_ret_as_list as opposed to single_ret_as_list. The
latter was able to return list of things. However the new, more modern,
version came and it is used since listAllDomains till nowadays in
ListServers.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We were using parentheses for grouping admin|remote even though we didn't
need to capture what's in it. That caused some changes to be greater
than needed and, to be honest, some confusion as well. Let's use it as
it should be used. It'll also make future changes more consistent.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
For now it does not matter which ones we return as the code is similarly
complex, however it will fit in with other constructs in the future,
mainly when we will be able to generate dispatch helpers.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
virHashForEach() returns 0 if everything went nice, so our session
daemon was timing out even when there was a client connected.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1315606
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This serves the same purpose as VIR_ERR_NO_xxx where xxx is any object
that API can be called upon. Only this particular one is used for
daemon's servers.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since servers know their name, there is no need to supply such
information twice. Also defeats inconsistencies.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
At first I did not want to do this, but after trying to implement some
newer feaures in the admin API I realized we need that to make our lives
easier. On the other hand they are not saved redundantly and the
virNetServer objects are still kept in a hash table.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Function virAdmConnectListServers() forgot to check for flags at all,
virAdmConnectOpen() on the other hand checked them but did no dispatch
the error. virCheckFlags() should be used only when there should be no
other thing done after erroring out and since they are used on different
places then just public API, they cannot dispatch errors. So let's use
virCheckFlagsGoto instead.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Add new function to manage adding the network device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the -fsdev options to the
command line removing that task from the mainline qemuBuildCommandLine.
Alter the code slightly to perform the !caps and fsdev failure check
up front.
Since both qemuBuildFSStr and qemuBuildFSDevStr are local, make them
static and fix their prototypes to use the const virDomainDef as well.
Make some minor formatting changes for long lines.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the disk -drive options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also since using const virDomainDef in new function, that means other
functions called needed to change their usage.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the hub -device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also make qemuBuildHubDevStr static to the module since it's only
used here.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the controller -device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also adjust to using const virDomainDef instead of virDomainDefPtr.
This causes collateral damage in order to modify called APIs to use
the const virDomainDef instead as well.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the -global controller options to
the command line removing that task from the mainline qemuBuildCommandLine.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the -boot options to the command
line removing that task from the mainline qemuBuildCommandLine.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the power management options to the
command line removing that task from the mainline qemuBuildCommandLine.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the '-clock' options to the command
line removing that task from the mainline qemuBuildCommandLine.
Also includes some minor formatting cleanups.
Signed-off-by: John Ferlan <jferlan@redhat.com>
When debug-threads is enabled, individual threads are given a separate
name (on Linux)
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1140121
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
QEMU (somewhere around 2.0) added a new sub-option to the -name flag
-name debug-threads=on.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Currently the file based character devices let QEMU write
directly to a file on disk. This allows a malicious QEMU
to inflict a denial of service by consuming all free space.
Switch QEMU to use a pipe to virtlogd, which will enforce
file rollover.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If use of virtlogd is enabled, then use it for backing the
character device log files too. This avoids the possibility
of a guest denial of service by writing too much data to
the log file.
The virtlogd daemon currently opens all files for append, but
in some cases the user may wish to discard existing data. Define
a new flag to indicate that logfiles should be truncated when
opening.
The functions for handling FD passing when building command line
arguments need to be used by many different bits of code, so need
to be at the start of the source file
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The act of formatting a chardev backend value may need to
append command line arguments for passing FDs. If we append
the -chardev arg before formatting the value, then the
resulting arguments will end up interspersed
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Honour the <log file='...'/> element in chardevs to output
data to a file. This requires QEMU >= 2.6
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Extend the chardev source XML so that there is a new optional
<log/> element, which is applicable to all character device
backend types. For example, to log output of a TCP backed
serial port
<serial type='tcp'>
<source mode='connect' host='127.0.0.1' service='9999'/>
<protocol type='raw'/>
<log file='/var/log/libvirt/qemu/demo-serial0.log' append='on'/>
<target port='0'/>
</serial>
Not all hypervisors will support use of logfiles.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Not all callers of virLogManagerDomainOpenLogFile will
care about getting the current inode/offset, so we should
allow those parameters to be NULL
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Now that the function was extracted we can get rid of some temp
variables. Additionally formatting of the bitmap string for the event
code should be checked.
Allow pinning for inactive vcpus. The pinning mask will be automatically
applied as we would apply the default mask in case of a cpu hotplug.
Setting the scheduler settings for a vcpu has the same semantics.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1306556
Introduce VIR_DOMAIN_DEF_FEATURE_OFFLINE_VCPUPIN domain feature flag
whcih will allow to skip ignoring of the pinning information for
hypervisor drivers which will want to implement forward-pinning of
vcpus.
Introduce a helper to check supported device and domain config and move
the memory hotplug checks to it.
The advantage of this approach is that by default all new features are
considered unsupported by all hypervisors unless specifically changed
rather than the previous approach where every hypervisor would need to
declare that a given feature is unsupported.
To avoid having to forbid new features added to domain XML in post parse
callbacks for individual hypervisor drivers the feature flag mechanism
will allow to add a central check that will be disabled for the drivers
that will add support.
As a first example flag, the 'hasWideSCSIBus' is converted to the new
bitmap.
The VIR_DOMAIN_EVENT_ID_JOB_COMPLETED event will be triggered once a job
(such as migration) finishes and it will contain statistics for the job
as one would get by calling virDomainGetJobStats. Thanks to this event
it is now possible to get statistics of a completed migration of a
transient domain on the source host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We would happily report and free statistics of a completed migration
even before it actually completed (on the source host while migration is
in the Finish phase).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Computing a total downtime during a migration requires us to store a
time stamp when guest CPUs get stopped. The value (and all other
statistics) is then transferred to the destination to compute the
downtime. Because the stopped time stamp is stored by a STOP event
handler while the statistics which will be sent over to the destination
are copied synchronously within qemuMigrationWaitForCompletion.
Depending on the timing of STOP and MIGRATION events, we may end up
copying (and transferring) statistics without the stopped time stamp
set. Let's make sure we always use the correct time stamp.
https://bugzilla.redhat.com/show_bug.cgi?id=1282744
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
With a very old QEMU which doesn't support events we need to explicitly
call qemuMigrationSetOffline at the end of migration to update our
internal state. On the other hand, if we talk to QEMU using QMP, we
should just wait for the STOP event and let the event handler update the
state and trigger a libvirt event.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We should not overwrite all migration statistics on the source with the
numbers sent by the destination since the source may have an updated
view in some cases (such as post-copy migration). It's safer to update
just the timing info we need to get from the destination and be prepared
for the future. And we should only do all this after a successful
migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Statistics for a completed migration only make sense if the migration
was successful. Let's not store them in priv->job.completed until we
are sure it was a success.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The comment claimed that virPCIDeviceReattach() does not reattach
a device to the host driver; except it actually does, so the
comment is just confusing and we're better off removing it.
Replace the term "loop" with the more generic "step". This allows us
to be more flexible and eg. have a step that consists in a single
function call.
Don't include the number of steps in the first comment of the
function, so that we can add or remove steps without having to worry
about keeping that comment in sync.
For the same reason, remove the summary contained in that comment.
Clean up some weird vertical spacing while we're at it.
If the stars are in the right position and you're building with
VBox >= 4.2.0 it will happen that compiler thinks an array
allocated on the stack may be unbounded:
In file included from vbox/vbox_V4_2.c:13:0:
vbox/vbox_tmpl.c: In function '_virtualboxCreateMachine':
vbox/vbox_tmpl.c:2811:1: error: stack usage might be unbounded [-Werror=stack-usage=]
_virtualboxCreateMachine(vboxGlobalData *data, virDomainDefPtr def, IMachine **machine, char *uuidstr ATTRIBUTE_UNUSED)
^
Well, given how the variable is declared, I had some hard time
seeing it is actually bounded. Surprisingly compiler does not
complain because of -Wframe-larger-than. This is because
variable length arrays do not count into that warning.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The code does not handle renaming of the save state file. In addition to
that the resuming code would need to be tweaked to handle the name
change since the XML is extracted from the save image. The easies option
is to make the rename API even less useful by forbiding this.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1314594
This is an error message I've just seen. Fix it by initializing
@inode.
CC lxc/libvirt_driver_lxc_impl_la-lxc_process.lo
lxc/lxc_process.c: In function 'virLXCProcessMonitorInitNotify':
lxc/lxc_process.c:767:23: error: 'inode' may be used uninitialized in this function [-Werror=maybe-uninitialized]
virDomainAuditInit(vm, initpid, inode);
^
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Original current flag expansion does not filter out non
_CONFIG and _LIVE flags explicitly but they are prohibited
earlier by virCheckFlags.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Flag expansion is the same as in virDomainObjUpdateModificationImpact
which virDomainLiveConfigHelperMethod calls internally. The difference
is merely in implementation. Note that VIR_DOMAIN_MEM_CONFIG is the
same as VIR_DOMAIN_AFFECT_CONFIG. Additionally, the called functions
will properly use flag OR and thus handle the VIR_DOMAIN_MEM_MAXIMUM case.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
While trying to build with -Os couple of compile errors showed
up.
conf/domain_conf.c: In function 'virDomainChrRemove':
conf/domain_conf.c:13666:24: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized]
virDomainChrDefPtr ret, **arrPtr = NULL;
^
Compiler fails to see that @ret is used only if set in the loop,
but whatever, there's no harm in initializing the variable.
In vboxAttachDrivesNew and _vboxAttachDrivesOld compiler thinks
that @rc may be used uninitialized. Well, not directly, but maybe
after some optimization. Yet again, no harm in initializing a
variable.
In file included from ./util/virthread.h:26:0,
from ./datatypes.h:28,
from vbox/vbox_tmpl.c:43,
from vbox/vbox_V3_1.c:37:
vbox/vbox_tmpl.c: In function '_vboxAttachDrivesOld':
./util/virerror.h:181:5: error: 'rc' may be used uninitialized in this function [-Werror=maybe-uninitialized]
virReportErrorHelper(VIR_FROM_THIS, code, __FILE__, \
^
In file included from vbox/vbox_V3_1.c:37:0:
vbox/vbox_tmpl.c:1041:14: note: 'rc' was declared here
nsresult rc;
^
Yet again, one uninitialized variable:
qemu/qemu_driver.c: In function 'qemuDomainBlockCommit':
qemu/qemu_driver.c:17194:9: error: 'baseSource' may be used uninitialized in this function [-Werror=maybe-uninitialized]
qemuDomainPrepareDiskChainElement(driver, vm, baseSource,
^
And another one:
storage/storage_backend_logical.c: In function 'virStorageBackendLogicalMatchPoolSource.isra.2':
storage/storage_backend_logical.c:618:33: error: 'thisSource' may be used uninitialized in this function [-Werror=maybe-uninitialized]
thisSource->devices[j].path))
^
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While trying to build with -Os I've encountered some build
failures.
util/vircommand.c: In function 'virCommandAddEnvFormat':
util/vircommand.c:1257:1: error: inlining failed in call to 'virCommandAddEnv': call is unlikely and code size would grow [-Werror=inline]
virCommandAddEnv(virCommandPtr cmd, char *env)
^
util/vircommand.c:1308:5: error: called from here [-Werror=inline]
virCommandAddEnv(cmd, env);
^
This function is big enough for the compiler to be not inlined.
This is the error message I'm seeing:
Then virDomainNumatuneNodeSpecified is exported and called from
other places. It shouldn't be inlined then.
In file included from network/bridge_driver_platform.h:30:0,
from network/bridge_driver_platform.c:26:
network/bridge_driver_linux.c: In function 'networkRemoveRoutingFirewallRules':
./conf/network_conf.h:350:1: error: inlining failed in call to 'virNetworkDefForwardIf.constprop': call is unlikely and code size would grow [-Werror=inline]
virNetworkDefForwardIf(const virNetworkDef *def, size_t n)
^
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
More fallout from changing to using virPolkitAgent and handling error
paths. Needed to clear the 'cmd' once stored and of course add the
virCommandFree(cmd) in the error: label.
Older compilers fail to see that 'close' is not used a function
rather than a variable and produce the following error:
cc1: warnings being treated as errors
../../src/datatypes.c: In function 'virConnectCloseCallbackDataReset':
../../src/datatypes.c:149: error: declaration of 'close' shadows a global declaration [-Wshadow]
Replace all the 'close' occurrences with 'closeData' to resolve
this.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In virPolkitAgentCreate neglected to initialize agent to NULL. If
there was an error in the pipe, then we jump to error and would have
an issue. Found by coverity.
libxlDomainPinVcpuFlags calls virDomainLiveConfigHelperMethod which will
call virDomainObjUpdateModificationImpact make the same AFFECT_LIVE flags
and !active check, so remove this duplicated check.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Prior to commit id '3d021381' virDomainObjUpdateModificationImpact was
part of virDomainLiveConfigHelperMethod and the *flags if condition
VIR_DOMAIN_AFFECT_CONFIG checked the ->persistent boolean and made the
virDomainObjGetPersistentDef call.
Since the functions were split the ->persistent check is all that remained
and thus could be combined into one if statement.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
When SPICE graphics is configured for a domain but we did not ask the
client to switch to the destination, we should not wait for
SPICE_MIGRATE_COMPLETED event (which will never come).
https://bugzilla.redhat.com/show_bug.cgi?id=1151723
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Migration statistics are not available on the destination host and
starting a query job during incoming migration is not allowed. Trying to
do that would result in
Timed out during operation: cannot acquire state change lock (held
by remoteDispatchDomainMigratePrepare3Params)
error. We should not even try to start the job.
https://bugzilla.redhat.com/show_bug.cgi?id=1278727
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This parameter represents top level period cgroup
that limits whole domain enforcement period for a quota
Signed-off-by: Alexander Burluka <aburluka@virtuozzo.com>
If connect close is fired then following unregister will fail
as we set callback to NULL and thus callback equality checking
will fail.
Callback is set to NULL to make it fired only one time probabaly.
Instead lets use connection equality to NULL to check if callback
is already fired.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
We have reference to connection object in virConnectCloseCallbackData
object thus we have to refcount it. Obviously we have problems
in dispose and call functions. Let's fix it.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Make register and unregister functions return void because
we can check the state of callback object beforehand via
virConnectCloseCallbackDataGetCallback. This can be done
without race conditions if we use higher level locks for registering
and unregistering. The fact they return void simplifies
task of consistent registering/unregistering.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
qemuProcessSetupEmulator runs at a point in time where there is only
the qemu main thread. Use virCgroupAddTask to put just that one task
into the emulator cgroup. That patch makes virCgroupMoveTask and
virCgroupAddTaskStrController obsolete.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Move qemuProcessSetupEmulator up under qemuSetupCgroup. That way
we move the one main thread right into the emulator cgroup, instead
of moving multiple threads later on. And we do not actually want any
threads running in the parent cgroups (cpu cpuacct cpuset).
Signed-off-by: Henning Schild <henning.schild@siemens.com>
This attribute is used to extend secondary PCI bar and expose it to the
guest as 64bit memory. It works like this: attribute vram is there to
set size of secondary PCI bar and guest sees it as 32bit memory,
attribute vram64 can extend this secondary PCI bar. If both attributes
are used, guest sees two memory bars, both address the same memory, with
the difference that the 32bit bar can address only the first part of the
whole memory.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1260749
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We always place primary video device at first place, to make it easier
to create a qemu command or format an xml, but we should also set the
primary boolean for primary video device to 'true'.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Introduce virPolkitAgentCreate and virPolkitAgentDestroy
virPolkitAgentCreate will run the polkit pkttyagent image as an asynchronous
command in order to handle the local agent authentication via stdin/stdout.
The code makes use of the pkttyagent --notify-fd mechanism to let it know
when the agent is successfully registered.
virPolkitAgentDestroy will close the command effectively reaping our
child process
When there isn't a ssh -X type session running and a user has not
been added to the libvirt group, attempts to run 'virsh -c qemu:///system'
commands from an otherwise unprivileged user will fail with rather
generic or opaque error message:
"error: authentication failed: no agent is available to authenticate"
This patch will adjust the error code and message to help reflect the
situation that the problem is the requested mechanism is UNAVAILABLE and
a slightly more descriptive error. The result on a failure then becomes:
"error: authentication unavailable: no polkit agent available to
authenticate action 'org.libvirt.unix.manage'"
A bit more history on this - at one time a failure generated the
following type message when running the 'pkcheck' as a subprocess:
"error: authentication failed: polkit\56retains_authorization_after_challenge=1
Authorization requires authentication but no agent is available."
but, a patch was generated to adjust the error message to help provide
more details about what failed. This was pushed as commit id '96a108c99'.
That patch prepended a "polkit: " to the output. It really didn't solve
the problem, but gave a hint.
After some time it was deemed using DBus API calls directly was a
better way to go (since pkcheck calls them anyway). So, commit id
'1b854c76' (more or less) copied the code from remoteDispatchAuthPolkit
and adjusted it. Then commit id 'c7542573' adjusted the remote.c
code to call the new API (virPolkitCheckAuth). Finally, commit id
'308c0c5a' altered the code to call DBus APIs directly. In doing
so, it reverted the failing error message to the generic message
that would have been received from DBus anyway.
This new API will allocate the secret, assign the def pointer, and
insert the secret onto the passed list. Whether that's the temporary
list in loadSecrets which gets loaded into the driver list or driver
list during secretDefineXML.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add a temporary helper to search for a specific secret by address
on the list and remove it if it's found. The following patch will
introduce a common allocation and listInsert helper. That means
error paths of the routines calling would need a way to remove the
secret off the list.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This patch removes need for secretBase64Path and secretComputePath. Similar
to the configFile, create an entry for base64File, which will be generated
as the driver->configDir, the UUID value, plus the ".base" suffix. Rather
than generating on the fly, store this in the virSecretObj.
The buildup of the pathname done in loadSecrets where the failure to build
is ignored which is no different than the failure to generate the name
in secretLoadValue which would have been ignored in the failure path
after secretLoad.
This also removes the need for secretComputPath and secretBase64Path.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This patch removes the need for secretXMLPath. Instead save 'path' during
loadSecret as 'configFile'. The secretXMLPath is nothing more than an
open coded virFileBuildPath. All that code did was concantenate the
driver->configDir, the UUID of the secret, and the ".xml" suffix to form
the configFile name which we now will generate and save instead.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The 'secretLoad' was essentially open coding virFileBuildPath.
Adjust the logic to have the caller build the path and pass it. The net
sum of ignoring the virFileBuildPath failure is the same as before where
the failure to virAsprintf the path would have been ignored anyway in
the secretLoad error path.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Remove the need for the local 'secret' in secretConnectListAllSecrets.
A subsequent patch will rename the ObjPtr entry to secret.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than having it interspersed with other changes, do it once.
Remove a couple ^L, 1 argument per line for functions, less than 80 chars
per line, use of spacing between logical groups of code, use of one line
if statements when doing fetch followed by comparison, use direct return
when no cleanup to be done.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Use virCgroupAddTaskController in virCgroupAddTask so we have one
single point where we add tasks to cgroups.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
We honour the placement bitmaps when starting up, so there's no point in
having this check. Additionally the check was buggy since it checked
vm->def all the time even if the user requested to modify the persistent
definition which had different configuration.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1308317
Add Spice graphics gl attribute. qemu 2.6 should have -spice gl=on argument to
enable opengl rendering context (patches on the ML). This is necessary to
actually enable virgl rendering.
Add a qemuxml2argv test for virtio-gpu + spice with virgl.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Per-domain directories were introduced in order to be able to
completely separate security labels for each domain (commit
f1f68ca334). However when the domain
name is long (let's say a ridiculous 110 characters), we cannot
connect to the monitor socket because on length of UNIX socket address
is limited. In order to get around this, let's shorten it in similar
fashion and in order to avoid conflicts, throw in an ID there as well.
Also save that into the status XML and load the old status XMLs
properly (to clean up after older domains). That way we can change it
in the future.
The shortening can be seen in qemuxml2argv tests, for example in the
hugepages-pages2 case.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Found by inspection - after calling virStoragePoolObjAssignDef the
pool is part of the driver->pools.objs list and the failure path
for the virStoragePoolObjSaveDef will use virStoragePoolObjRemove
to remove the pool from the objs list which will unlock and free
the pool pointer (as pools->objs[i] during the loop). Since the call
doesn't clear the pool address from the callee, we need to set it
to NULL; otherwise, the virStoragePoolObjUnlock in the cleanup: code
will fail miserably.
While reviewing how storage driver used ObjListPtr's for reference
in some recent secret driver patches to use the same mechanism, I came
across an instance where the wrong API was called for error paths after
successfully allocating the storage pool pointer and inserting into
the driver pool list.
The path is after virStoragePoolObjAssignDef succeeds - the 'def' passed
in is assigned to pool->def (or newDef) so it shouldn't be the only thing
deleted. The pool is now part of driver->pools.objs, so it would need to
be removed (as happens in the storagePoolCreateXML error paths).
Rather than calling virStoragePoolDefFree to free the def which is now
assigned to the pool, call virStoragePoolObjRemove to ensure the pool
element is removed from the driver list and that anything stored in pool
is properly handled by virStoragePoolObjFree including the call to
virStoragePoolDefFree for the pool->{def|newDef} element.
Commit f1a89a8 allowed parsing configs from /etc/libvirt
without validating the emulator capabilities.
Check for the presence of a machine type in the qemu driver's
post parse function instead of crashing.
https://bugzilla.redhat.com/show_bug.cgi?id=1267256
libxlMakeNic opens a virConnect object and takes a reference on a
virNetwork object, but doesn't drop the references on all error
paths. Rework the function to follow the standard libvirt pattern
of using a local 'ret' variable to hold the function return value,
performing all cleanup and returning 'ret' at a 'cleanup' label.
Generates a false positive for Coverity, but it turns out there's no need
to check ret == -1 since if VIR_APPEND_ELEMENT is successful, the local
vol pointer is cleared anyway.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Found by my Coverity checker - virCheckFlags call could return -1, but
not virCommandFree(destroy_cmd).
Signed-off-by: John Ferlan <jferlan@redhat.com>
When parsing the barrier:limit values, use virStringSplitCount in order
to split the pair and make the approriate checks to get the data.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The virHostdevIsVirtualFunction() was called exactly twice, and in
both cases the return value was saved to a temporary variable before
being checked. This would be okay if it improved readability, but in
this case is pretty pointless.
Get rid of the temporary variable and check the return value
directly; while at it, change the check from '<= 0' to '!= 1' to
align it with the way other similar *IsVirtualFunction() functions
are used thorough the code.
virNetDevIsVirtualFunction() returns 1 if the interface is a
virtual function, 0 if it isn't and -1 on error. This means that,
despite the name suggesting otherwise, using it as a predicate is
not correct.
Fix two callers that were doing so adding an explicit check on
the return value.
Introduce support for domainInterfaceStats API call for querying
network interface statistics. Consequently it also enables the use of
`virsh domifstat <dom> <interface name>` command plus seeing the
interfaces names instead of "-" when doing `virsh domiflist <dom>`.
After successful guest creation we fill the network interfaces names
based on domain, device id and append suffix if it's emulated in the
following form: vif<domid>.<devid>[-emu]. We extract the network
interfaces info from the libxl_domain_config object in
libxlDomainCreateIfaceNames() to generate ifname. On domain cleanup we
also clear ifname, in case it was set by libvirt (i.e. being prefixed
with "vif"). We also skip these two steps in case the name of the
interface was manually inserted by the administrator. Since the
introduction of netprefix (commit a040ba9), ifnames with a registered
prefix will be freed on virDomain{Obj,Def}Format*, thus eliminating
the migration issues observed with the reverted commit d2e5538 whereas
source and destination would have the same ifname.
For getting the interface statistics we resort to virNetInterfaceStats
and let libvirt handle the platform specific nits. Note that the
latter is not yet supported in FreeBSD.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
%zu is not always synonymous with uint64_t; on 32-bit machines,
size_t is only 32 bits. Prefer "%lld"/'unsigned long long' when
the variable is under our control, and "%"PRIu64 when we are
stuck with 'uint64_t' from RBD.
Fixes errors such as:
../../src/storage/storage_backend_rbd.c: In function 'virStorageBackendRBDVolWipe':
../../src/storage/storage_backend_rbd.c:1281:15: error: format '%zu' expects argument of type 'size_t', but argument 8 has type 'uint64_t {aka long long unsigned int}' [-Werror=format=]
VIR_DEBUG("Need to wipe %zu bytes from RBD image %s/%s",
^
../../src/util/virlog.h:90:73: note: in definition of macro 'VIR_DEBUG_INT'
virLogMessage(src, VIR_LOG_DEBUG, filename, linenr, funcname, NULL, __VA_ARGS__)
^
../../src/storage/storage_backend_rbd.c:1281:5: note: in expansion of macro 'VIR_DEBUG'
VIR_DEBUG("Need to wipe %zu bytes from RBD image %s/%s",
^
Signed-off-by: Eric Blake <eblake@redhat.com>
There's this check when building command line that whenever
domain has no graphics card configured we put -nographics onto
qemu command line. The check is 'if (!def->graphics)'. This
makes coverity think that def->graphics can be NULL, which is
true. But later in the code every access to def->graphics is
guarded by check for def->ngraphics, so no crash occurs. But this
is something that coverity fails to deduct.
In order to shut coverity up lets change the condition to
'if (!def->ngraphics)'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After 6604a3dd9f in which new helper function has been
introduced, the code calls virStringReplace and dereference the
result immediately. The string function can, however, return NULL
so this would SIGSEGV right away. Check for the return value of
the string function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After 457ff97fa there are two defects in our code. In both of
them we use a signed variable to hold up a number of snapshots
that domain has. We use a helper function to count the number.
However, the helper function may fail in which case it returns
a negative one and control jumps to cleanup label where an
unsigned variable is used to iterate over array of snapshots. The
loop condition thus compare signed and unsigned variables which
in this specific case ends up badly for us.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
xl/libxl already supports qemu's network-based block backends
such as nbd and rbd. libvirt has supported configuring such
<disk>s for long time too. This patch adds support for rbd
disks in the libxl driver by generating a rbd device URL from
the virDomainDiskDef object. The URL is passed to libxl via the
pdev_path field of libxl_device_disk struct. libxl then passes
the URL to qemu for cosumption by the rbd backend.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The target= setting in xl disk configuration can be used to encode
meta info that is meaningful to a backend. Leverage this fact to
support qdisk network disk types such as rbd. E.g. <disk> config
such as
<disk type='network' device='disk'>
<driver name='qemu' type='raw'/>
<source protocol='rbd' name='pool/image'>
<host name='mon1.example.org' port='6321'/>
<host name='mon2.example.org' port='6322'/>
<host name='mon3.example.org' port='6322'/>
</source>
<target dev='hdb' bus='ide'/>
<address type='drive' controller='0' bus='0' target='0' unit='1'/>
</disk>
can be converted to the following xl config (and vice versa)
disk = [ "format=raw,vdev=hdb,access=rw,backendtype=qdisk,
target=rbd:pool/image:auth_supported=none:mon_host=mon1.example.org\\:6321\\;mon2.example.org\\:6322\\;mon3.example.org\\:6322"
]
Note that in xl disk config, a literal backslash in target= must
be escaped with a backslash. Conversion of <auth> config is not
handled in this patch, but can be done in a follow-up patch.
Also add a test for the conversions.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The most formal form of xl disk configuration uses key=value
syntax to define each configuration item, e.g.
format=raw, vdev=xvda, access=rw, backendtype=phy, target=disksrc
Change the xl disk formatter to produce this syntax, which allows
target= to contain meta info needed to setup a network-based
disksrc (e.g. rbd, nbd, iscsi). For details on xl disk config
format, see $xen-src/docs/misc/xl-disk-configuration.txt
Update the disk config in the tests to use the formal syntax.
But add tests to ensure disks specified with the positional
parameter syntax are correctly converted to <disk> XML.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
It may be useful in some cases to call TristateSwitch helper with TristateBool.
Document that enum values equivalency in the code.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
In case you will specify graphics like this:
<graphics type='spice' port='-1'/>
or
<graphics type='spice' port='-1' tlsPort='6000'/>
libvirt will automatically add autoport='no'. This leads to an issue
that in qemuProcessStop() we don't release that port because we are
releasing both port if autoport=yes or only port marked as reserved.
If autoport=no but we request to generate port via '-1' we need to mark
that port as reserved in order to release it.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1299696
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Checking whether x > 0 before looping over [0..x] items doesn't make
sense and multi-line body must have curly brackets around it.
Best viewed with '-w'.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This does nothing more than adding the new device and capability.
The device is present since QEMU 2.6.0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There's a check if a domain definition has any graphics card and
if so, we iterate over each one of them. This makes no sense,
because even if it has none we can still iterate over.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
GIC v2 is the default, but checking against that specific version when
we want to know whether the default has been selected is potentially
error prone; using an alias instead makes it safer.
Similarly to VM startup always set the legacy affinity. Additionally we
don't need to report an explicit error since virProcessSetAffinity
reports them themselves.
Similarly to VM startup always set the legacy affinity. Additionally we
don't need to report an explicit error since virProcessSetAffinity
reports them themselves.
PostParse handles it for us now.
This causes some test suite churn; qemu's custom PostParse could is
now invoked before the generic AddImplicitControllers, so PCI
controllers end up sequentially in the XML before the generically
added IDE controllers. So it's just some XML reordering
Seems like the natural fit, since we are already adding other XML bits
in the PostParse routine.
Previously AddImplicitControllers was only called at the end of XML
parsing, meaning code that builds a DomainDef by hand had to manually
call it. Now those PostParse callers get it for free.
There's some test churn here; xen xm and sexpr test suite bits weren't
calling this before, but now they are, so you'll see new IDE controllers.
I don't think this will cause problems in practice, since the code already
needs to handle these implicit controllers like in the case when a user
defines their own XML.
virDomainObjWait is designed to be called in a loop. Make sure we break
the loop in case the domain dies to avoid waiting for an event which
will never happen.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Calling qemuProcessStop without a job opens a way to race conditions
with qemuDomainObjExitMonitor called in another thread. A real world
example of such a race condition:
- migration thread (A) calls qemuMigrationWaitForSpice
- another thread (B) starts processing qemuDomainAbortJob API
- thread B signals thread A via qemuDomainObjAbortAsyncJob
- thread B enters monitor (qemuDomainObjEnterMonitor)
- thread B calls qemuMonitorSend
- thread A awakens and calls qemuProcessStop
- thread A calls qemuMonitorClose and sets priv->mon to NULL
- thread B calls qemuDomainObjExitMonitor with priv->mon == NULL
=> monitor stays ref'ed and locked
Depending on how lucky we are, the race may result in a memory leak or
it can even deadlock libvirtd's event loop if it tries to lock the
monitor to process an event received before qemuMonitorClose was called.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Stopping a domain without a job risks a race condition with another
thread which started a job a which does not expect anyone else to be
messing around with the same domain object.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Only a small portion of processGuestPanicEvent was enclosed within a
job, let's make sure we use the job for all operations to avoid race
conditions.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When destroying a domain we need to make sure we will be able to start a
job no matter what other operations are running or even stuck in a job.
This is done by killing the domain before starting the destroy job.
Let's introduce qemuProcessBeginStopJob which combines killing a domain
and starting a job in a single API which can be called everywhere we
need a job to stop a domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Ending a nested job is no different from ending any other (non-async)
job, after all the code in qemuDomainBeginJobInternal does not handle
them differently either. Thus we should call qemuDomainObjEndJob to stop
nested jobs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuDomainHelperGetVcpus would correctly return an array of
virVcpuInfoPtr structs for online vcpus even for sparse topologies, but
the loop that fills the returned typed parameters would number the vcpus
incorrectly. Fortunately sparse topologies aren't supported yet.
