Annotate arguments which can be unintentionally parsed positionally.
(See previous commits for explanation.)
Annotate '--migrateuri', '--graphicsuri', '--listen-address', '-dname',
'--timeout', '--xml', '--migrate-disks' and '--disks port' as
'unwanted_positional'. These were declared in chronological order per
git history.
All others are annotated with VSH_OFLAG_REQ_OPT which makes the parser
require the '--optionname'. This is due to the fact that '--disks-uri'
was introduced later and put in front of others declared earlier
breaking the order they would be accepted, thus changing the behaviour
between versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make all of the tunable parameter flags require the option name (don't
parse them positionally).
While techically this would be a breaking change if anyone were to
specify the tunable values positionally this is not the case as the
first two tunables are not compatible with each other:
$ virsh blkdeviotune cd vda 4 5
error: Unable to change block I/O throttle
error: invalid argument: total and read/write of bytes_sec cannot be set at the same time
The above is produced by all implementations of the API (qemu and test
drivers). It is true that the first tunable can be specified
positionally (--total-bytes-sec) but it is misleading and shoud not be
allowed either.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While previous fixes kept the help output unchanged as base for the
refactors it turns out that the formatting of help for argv options is
wrong.
Specifically in SYNOPSIS the non-positional _ARGV would have the option
name in square brackets (which in other cases means that given thing is
optional) despite being required.
Similarly in the DESCRIPTION section positional versions would not show
the optional argument name and also didn't use the three dots to signal
that it can be used multiple times.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In most cases it's the usual/recommended way to use those commands:
$ virsh qemu-monitor-command VMNAME cmd args args args
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our documentation in most places explicitly mentions --diskspec and it
was never meant to be positional, although we can't change the parser
any more. Annotate them as 'unwanted_positional'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Based on the rationale in previous commit, all commands which were
parsed as positional but not documented as such will be annotated with
this flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While the virsh option definitions specify (either explicitly after
recent refactors, or implicitly before) whether an argument is
positional or not, the actual parser is way more lax and actually and
allows also arguments which were considered/documented as non-positional
to be filled positionally unless VSH_OFLAG_REQ_OPT is used in the flags.
This creates situations such as 'snapshot-create-as' which has the
following docs:
SYNOPSIS
snapshot-create-as <domain> [--name <string>] [--description <string>]
[--print-xml] [--no-metadata] [--halt] [--disk-only]
[--reuse-external] [--quiesce] [--atomic] [--live] [--validate]
[--memspec <string>] [[--diskspec] <string>]...
Thus showing as if '--name' and '--description' required the option, but
in fact the following happens when only positionals are passed:
$ virsh snapshot-create-as --print-xml 1 2 3 4 5
<domainsnapshot>
<name>2</name>
<description>3</description>
<disks>
<disk name='4'/>
<disk name='5'/>
</disks>
</domainsnapshot>
In the above example e.g. '--memspec' is not populated.
This disconnect makes it impossible to refactor the parser itself and
allows users to write buggy interactions with virsh.
In order to address this we'll be annotating every single of these
unwanted positional options as such so that this doesn't happen in the
future, while still preserving the quirk in the parser.
This patch introduces a tool which outputs list of options which are not
marked as positional but are lacking the VSH_OFLAG_REQ_OPT flag.
This tool will be removed once all the offenders found by it will be
addressed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The macro is used in just one place and the definition of the option is
going to be modified. Inline the macro.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The macro is used in one place only and the command definition will be
altered. Inline it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will need to tweak some of the properties of the
command. Since the macro is used in just two places expand it inline.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
- move the check that completer_flags are 0 if no completer is set
into a common place and remove duplication
- add check that _BOOL arguments are not positional
- add missing checks to _ALIAS
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All virsh commands in non-quiet mode append another separator line thus
having two is unnecessary and in quiet mode it still has a trailing
blank line. Remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As this command was introduced in this release add the flag requiring to
pass optionname.
This is needed to actually disallow positional parsing of the value
despite documenting that the flag name is required.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
vshAdmCatchDisconnect requires non-NULL structure vshControl for
getting connection name (stored at opaque), but
virAdmConnectRegisterCloseCallback at vshAdmConnect called it
with NULL.
Signed-off-by: Adam Julis <ajulis@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The flag was replaced by the 'required' field in the option definition.
Remove last few uses and all assignments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new 'positional' field to do decisions rather than have a
special type for positional strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new flags to do the decisions which will also fix the case when
an _INT option is required but non-positional.
This fixes the help for the 'timeout' argument of 'daemon-timeout'
virt-admin command:
SYNOPSIS
- daemon-timeout <timeout>
+ daemon-timeout --timeout <number>
[...]
OPTIONS
- [--timeout] <number> number of seconds the daemon will run without any active connection
+ --timeout <number> number of seconds the daemon will run without any active connection
Resolves: https://issues.redhat.com/browse/RHEL-25993
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the code was refactored and proved identical, remove the checks
so that they don't impede further refactors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is logically enforced by existing checks, thus we can formalize it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In at least one case we've wanted a mandatory argument which requires
the explicit flag. Fix the assumption before converting everything over
to the new flags.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add 'positional' and 'required' fields to vshCmdOptDef, which will
explicitly track the two properties of arguments.
To ensure that we have proper coverage, add checks to
vshCmddefCheckInternals validating the state of the above flags by
infering it from existing data.
This conversion will allow us:
- remove VSH_OT_DATA in favor of VSH_OT_STRING
- use VSH_OT_INT when required both as positional and non-positional
- properly annotate which VSH_OT_ARGV are positional and which are not
(currently inferred by whether an previous positional option exists)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's just one command taking a list of domains as argument, thus
declare it inline.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Declare one argument per line, separate disticnt conditions by newline,
move some checks earlier.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract flag check to a separate variable and replace ternary operators
by normal conditions and use allocated buffer instead of a static one
to improve readability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract flag check to a separate variable and replace ternary operators
by normal conditions and directly output the text rather than using
extra variable to improve readability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Store the pointers to 'help' and 'description' information in the struct
directly rather than in a key-value list.
The generic approach never got any extra use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The new option dumps the full help outputs for every command so that
it's possible to conveniently check that subsequent refactors will not
impact any of the external functionality.
No man page entry is needed as the command is internal/undocumented.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some description of virsh commands referenced itself in a multi-line
example of usage, which is pointless as virsh help already shows how to
use the command:
.data = N_("Get or set the current memory parameters for a guest"
" domain.\n"
" To get the memory parameters use following command: \n\n"
" virsh # memtune <domain>")
Change it to just state what the command does and leave the example for
the help printer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use a switch statement to cover all cases and check for missing
completers for arguments declared as VSH_OT_ARGV.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's obvious that a command is an alias when the 'alias' property is
set, thus an extra flag is redundant. Remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a check that the default 0 assignment will not mean that an option
is considered to be VSH_OT_BOOL.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The command invoking the code is internal and meant for developers,
there's no point in translating the errors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
None of the clients use the 'command set' approach and other pieces of
code such as the command validator already assume that command groups
are in use. Remove the unused 'command set' stuff.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove some code repetition between desc and net-desc commands.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When editing the title of a domain or network via the `desc` or
`net-desc` commands, we strip the final newline that is added by some
editors.
Do the same when editing the description as well.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce the domdisplay-reload command to make the domain reload
its graphics certificates
#virsh domdisplay-reload <domain> --type <type>
Signed-off-by: Zheng Yan <yanzheng759@huawei.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Trying to print pages of a size larger than the UINT_MAX of the
given platform (for example, 4G on 64-bit ARM), results in a
system error even though this is a legitimate request.
The vshCommandOptScaledInt() used for parsing the pagesize is
given UINT_MAX as the upper limit. The parsed value is then
divided by 1024 and fed to virNodeGetFreePages() which expects an
unsigned int. We can't change the public API but the upper limit
can be raised by the factor of 1024.
Resolves: https://issues.redhat.com/browse/RHEL-23608
Signed-off-by: Adam Julis <ajulis@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow to modify a node device by using virNodeDeviceDefineXML() to align
its behavior with other drivers define methods.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we can filter persistent and transient node devices in
virConnectListAllNodeDevices(), add these switches also to the
virsh nodedev-list command.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow to dump the XML of the persistent mdev when the mdev has been
started instead of the current state only.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Adam Julis <ajulis@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The virshGetDBusDisplay() function is declared to return a
pointer and yet, in one error path false is returned. Switch the
statement to return NULL, which is what other error paths use to
indicate an error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The admin connection defaults to the system-wide 'libvirtd' daemon to
manage (libvirtd:///system). As we've now switched to modular daemons
this will not work for most users out of the box:
$ virt-admin version
error: Failed to connect to the admin server
error: no valid connection
error: Failed to connect socket to '/run/user/1000/libvirt/libvirt-admin-sock': No such file or directory
As we don't want to assume which daemon the user wants to manage in the
modular topology there's no reasonable default to pick.
Give a hint to the users to use the '-c' if the connection to the
default URI fails:
$ virt-admin version
NOTE: Connecting to default daemon. Specify daemon using '-c' (e.g. virtqemud:///system)
error: Failed to connect to the admin server
error: no valid connection
error: Failed to connect socket to '/run/user/1000/libvirt/libvirt-admin-sock': No such file or directory
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
virsh already stores the connection URI in 'ctl->connname', use that
instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Probe the current URI so that other places don't need to do that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virsh already stores the connection URI in 'ctl->connname', use that
instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
