Since we already have such support for libxl all we need is qemu
driver adjustment. And a test case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1434451
Just like in 9324f67a57 we need to put default sata alias
(which is hardcoded to "ide", obvious, right?) onto the command
line instead of the one provided by user.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Give a better name to the capability for the sclpconsole device.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Up until now we assumed the spapr-vty device would always be
present, which is not very nice. Check for its availability before
using it instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Starting from qemu 2.11, the `-device vmcoreinfo` will create a fw_cfg
entry for a guest to store dump details, necessary to process kernel
dump with KASLR enabled and providing additional kernel details.
In essence, it is similar to -fw_cfg name=etc/vmcoreinfo,file=X but in
this case it is not backed by a file, but collected by QEMU itself.
Since the device is a singleton and shouldn't use additional hardware
resources, it is presented as a <feature> element in the libvirt
domain XML.
The device is arm/x86 only for now (targets that support fw_cfg+dma).
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1395248
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.
Generated using
$ git grep -El '[[:blank:]][[:blank:]]\\$' | \
grep -E '*\.([chx]|am|mk)$$' | \
while read f; do \
sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
done
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Since the virStorageEncryptionPtr encryption; is a member of
_virStorageSource it really should be allowed to be a subelement
of the disk <source> for various disk formats:
Source{File|Dir|Block|Volume}
SourceProtocol{RBD|ISCSI|NBD|Gluster|Simple|HTTP}
NB: Simple includes sheepdog, ftp, ftps, tftp
That way we can set up to allow the <encryption> element to be
formatted within the disk source, but we still need to be wary
from whence the element was read - see keep track and when it
comes to format the data, ensure it's written in the correct place.
Modify the qemuxml2argvtest to add a parse failure when there is an
<encryption> as a child of <disk> *and* an <encryption> as a child
of <source>.
The virschematest will read the new test files and validate from a
RNG viewpoint things are fine.
Since the virStorageAuthDefPtr auth; is a member of _virStorageSource
it really should be allowed to be a subelement of the disk <source>
for the RBD and iSCSI prototcols. That way we can set up to allow
the <auth> element to be formatted within the disk source.
Since we've allowed the <auth> to be a child of <disk>, we'll need
to keep track of how it was read so that when writing out we'll know
whether to format as child of <disk> or <source>. For the argv2xml
parsing, let's format under <source> as a preference. Do not allow
<auth> to be both a child of <disk> and <source>.
Modify the qemuxml2argvtest to add a parse failure when there is an
<auth> as a child of <disk> *and* an <auth> as a child of <source>.
Add tests to validate that if the <auth> was found in <source>, then
the resulting xml2xml and xml2arg works just fine. The two new .args
file are exact copies of the non "-source" version of the file.
The virschematest will read the new test files and validate from a
RNG viewpoint things are fine
Update the virstoragefile, virstoragetest, and args2xml file to show
the "preference" to place <auth> as a child of <source>.
Somewhere around commit 9ff9d9f reserving entire PCI slots was
eliminated, as demonstrated by commit 6cc2014.
Reserve the functions required by the implicit devices:
00:01.0 ISA Bridge
00:01.1 IDE Controller
00:01.2 USB Controller (unless USB is disabled)
00:01.3 Bridge
https://bugzilla.redhat.com/show_bug.cgi?id=1460143
qemu 2.7.0 introduces multiqueue virtio-blk(commit 2f27059).
This patch introduces a new attribute "queues". An example of
the XML:
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2' queues='4'/>
The corresponding QEMU command line:
-device virtio-blk-pci,scsi=off,num-queues=4,id=virtio-disk0
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The test suite has hardcoded /etc/pki/qemu as the cert dir, but this
only works if configure has --sysconfdir=/etc passed. We must set the
vxhs cert dir to a stable path in the test suite.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Alter qemu command line generation in order to possibly add TLS for
a suitably configured domain.
Sample TLS args generated by libvirt -
-object tls-creds-x509,id=objvirtio-disk0_tls0,dir=/etc/pki/qemu,\
endpoint=client,verify-peer=yes \
-drive file.driver=vxhs,file.tls-creds=objvirtio-disk0_tls0,\
file.vdisk-id=eb90327c-8302-4725-9e1b-4e85ed4dc251,\
file.server.type=tcp,file.server.host=192.168.0.1,\
file.server.port=9999,format=raw,if=none,\
id=drive-virtio-disk0,cache=none \
-device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,\
id=virtio-disk0
Update the qemuxml2argvtest with a couple of examples. One for a
simple case and the other a bit more complex where multiple VxHS disks
are added where at least one uses a VxHS that doesn't require TLS
credentials and thus sets the domain disk source attribute "tls = 'no'".
Update the hotplug to be able to handle processing the tlsAlias whether
it's to add the TLS object when hotplugging a disk or to remove the TLS
object when hot unplugging a disk. The hot plug/unplug code is largely
generic, but the addition code does make the VXHS specific checks only
because it needs to grab the correct config directory and generate the
object as the command line would do.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
If a test expects either a parse error or a failure but then there is
neither a parse error nor a failure, then properly mark the test as
failing, instead of failing later on (e.g. trying to open a
non-existing .args file).
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
The guest of usb-bus-missing does not cause a parse error, but a
validation issue -- hence, switch from DO_TEST_PARSE_ERROR to
DO_TEST_FAILURE.
Fixes commit b003b9781b.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
The VxHS block device will only use the newer formatting options and
avoid the legacy URI syntax.
An excerpt for a sample QEMU command line is:
-drive file.driver=vxhs,file.vdisk-id=eb90327c-8302-4725-9e1b-4e85ed4dc251,\
file.server.type=tcp,file.server.host=192.168.0.1,\
file.server.port=9999,format=raw,if=none,id=drive-virtio-disk0,cache=none \
-device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,\
id=virtio-disk0
Update qemuxml2argvtest with a simple test.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1075520
Apart from generic checks, we need to constrain netmask/prefix
length a bit. Thing is, with current implementation QEMU needs to
be able to 'assign' some IP addresses to the virtual network. For
instance, the default gateway is at x.x.x.2, dns is at x.x.x.3,
the default DHCP range is x.x.x.15-x.x.x.30. Since we don't
expose these settings yet, it's safer to require shorter prefix
to have room for the defaults.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: laine@laine.org
Add a couple of tests to "validate" checks in domain_conf that either
a missing secrettype (CONFIG_UNSUPPORTED) or an mismatched secrettype
of ceph for an iSCSI disk (INTERNAL_ERROR) will cause a parsing error.
arm/aarch64 -M virt on KVM doesn't and will never work with standard
VGA card emulation. The recommended method is to use type=virtio, so
let's make it the default for video devices without an explicit type
set by the user.
https://bugzilla.redhat.com/show_bug.cgi?id=1404112
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Currently while parsing domain XML we clear the UNIX path if it matches
one of the auto-generated paths by libvirt. After that when the guest
is started new path is generated but the mode is also changed to "bind".
In the real-world use-case the mode should not change, it only happens
if a user provides a mode='connect' and path that matches one of the
auto-generated path or not provides a path at all.
Before *reconnect* feature was introduced there was no issue, but with
the new feature we need to make sure that it's used only with "connect"
mode, therefore we need to move the mode change into parsing in order
to have a proper error reported by validation code.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Split one of the existing tests to ensure both configuration
errors it contained cause a failure, and introduce a new
test case.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
There's some specific logic in qemuBuildCpuCommandLine to support
auto adding -cpu qemu 32 for arch=i686 with an x86_64 qemu binary.
Add a test case for it
https://bugzilla.redhat.com/show_bug.cgi?id=1458638
This code is so complicated because we allow enabling the same
bits at many places. Just like in this case: huge pages can be
enabled by global <hugepages/> element under <memoryBacking> or
on per <memory/> basis. To complicate things a bit more, users
are allowed to omit the page size which case the default page
size is used. And this is what is causing this bug. If no page
size is specified, @pagesize is keeping value of zero throughout
whole function. Therefore we need yet another boolean to hold
[use, don't use] information as we can't sue @pagesize for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Validate that we can pass QEMU command line options using a default
namespace, instead of a prefixed namespace
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This is a preparation for following patches where we switch to
virFileCache for QEMU capabilities cache
The host arch will always remain the same but virCaps may change. Now
the host arch is stored while creating new qemu capabilities cache.
It removes the need to pass virCaps into virQEMUCapsCache*() functions.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This patch addresses the same aspects on PPC the bug 1103314 addressed
on x86.
PCI expander bus creates multiple primary PCI busses, where each of these
busses can be assigned a specific NUMA affinity, which, on x86 is
advertised through ACPI on a per-bus basis.
For SPAPR, a PHB's NUMA affinities are assigned on a per-PHB basis, and
there is no mechanism for advertising NUMA affinities to a guest on a
per-bus basis. So, even if qemu-ppc manages to get some sort of multi-bus
topology working using PXB, there is no way to expose the affinities
of these busses to the guest. It can only be exposed on a per-PHB/per-domain
basis.
So patch enables NUMA node tag in pci-root controller on PPC.
The way to set the NUMA node is through the numa_node option of
spapr-pci-host-bridge device. However for the implicit PHB, the only way
to set the numa_node is from the -global option. The -global option applies
to all the PHBs unless explicitly specified with the option on the
respective PHB of CLI. The default PHB has the emulated devices only, so
the patch prevents setting the NUMA node for the default PHB.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
When looking for slots suitable for a PCI device, libvirt
might need to add an extra PCI controller: for pSeries guests,
we want that extra controller to be a PHB (pci-root) rather
than a PCI bridge.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
PCI bus has to be numbered sequentially, and no index can be
missing, so libvirt will fill in the blanks automatically for
the user.
Up until now, it has done so using either pci-bridge, for machine
types based on legacy PCI, or pcie-root-port, for machine types
based on PCI Express. Neither choice is good for pSeries guests,
where PHBs (pci-root) should be used instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
These tests demonstrate that, while it's now possible for the
user to create PHB explicitly and manually assign devices to
them, libvirt still defaults to extending the guest PCI
topology using PCI bridges and making suboptimal device
placement choices.
The next few commits will improve on these behaviors and the
tests outputs will automatically be updated to reflect this.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Later on we're going to need access to information about IOMMU
groups for host devices. Implement the support in virpcimock,
and start using that mock library in a few QEMU test cases.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Every qemu version we support has QEMU_CAPS_CHARDEV, so stop
explicitly tracking it and blacklist it like we've done for many
other feature flags.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Several tests are intending to test some serial/console related
bits but aren't setting QEMU_CAPS_CHARDEV. This will soon be enabled
unconditionally so let's add it ahead of time.
* q35-virt-manager-basic: Intended to test a virt-manager q35 config,
which will include a serial/console device
* console-compat*: console/serial XML compat handling
* bios: Needs a serial device for sgabios CLI
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
These tests are exercising old style -serial command lines. That
code will soon be removed, so drop these tests.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
AFAIK there aren't any qemu arch/machine types with platform parallel
devices that would require old style -parallel config, so we shouldn't
ever need this nowadays.
Remove a now redundant test
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This demonstrates that the previous qemu caps changes will use
-chardev for pci-serial on aarch64 machvirt
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Check for the LOADPARM capabilility and potentially add a loadparm=x to
the "-machine" string for the QEMU command line.
Also add xml2argv test cases for loadparm.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
When added in multiple previous commits, it was used only with -device
qxl(-vga), but for some QEMUs (< 1.6) we need to add this
functionality when using -vga qxl as well.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1283207
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1214369
My fix 671d18594f was incomplete. If domain doesn't have
hugepages enabled, because of missing condition we would still be
putting hugepages path onto qemu cmd line. Clean up the
conditions so that it's more visible next time.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1214369
Consider the following XML:
<memoryBacking>
<hugepages>
<page size='2048' unit='KiB' nodeset='1'/>
</hugepages>
<source type='file'/>
<access mode='shared'/>
</memoryBacking>
<numa>
<cell id='0' cpus='0-3' memory='512000' unit='KiB'/>
<cell id='1' cpus='4-7' memory='512000' unit='KiB'/>
</numa>
The following cmd line is generated:
-object
memory-backend-file,id=ram-node0,mem-path=/var/lib/libvirt/qemu/ram,
share=yes,size=524288000 -numa node,nodeid=0,cpus=0-3,memdev=ram-node0
-object
memory-backend-file,id=ram-node1,mem-path=/var/lib/libvirt/qemu/ram,
share=yes,size=524288000 -numa node,nodeid=1,cpus=4-7,memdev=ram-node1
This is obviously wrong as for node 1 hugepages should have been
used. The hugepages configuration is more specific than <source
type='file'/>.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
