This will be used later when a save cookie will become part of the
snapshot XML using new driver specific parser/formatter functions.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
There are three virStreamDriver's currently supported:
* virFDStream
* remote driver
* ESX driver
For now, backend virStreamRecvFlags support for only remote driver and
ESX driver is sufficient. Future patches will update virFDStream.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far our code is full of the following pattern:
dom = virGetDomain(conn, name, uuid)
if (dom)
dom->id = 42;
There is no reasong why it couldn't be just:
dom = virGetDomain(conn, name, uuid, id);
After all, client domain representation consists of tuple (name,
uuid, id).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
New line character in name of domain is now forbidden because it
mess virsh output and can be confusing for users.
Validation of name is done in drivers, after parsing XML to avoid
problems with dissappeared domains which was already created with
new-line char in name.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We want to pass the proper opaque pointer instead of NULL to
virDomainDefParse and subsequently virDomainDefParseNode too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When fetching domains with virConnectListAllDomains() and when filtering
by snapshot existence is requested the ESX driver first lists all the
domains and then check one-by-one for snapshot existence. This process
takes unnecessarily long time.
To significantly improve the time necessary to finish the query we can
request the snapshot related info directly when querying the list of
domains from VMware.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
I'm tired of mistyping this all the time, so let's do it the same all
the time (similar to how we changed all "Pci" to "PCI" awhile back).
(NB: I've left alone some things in the esx and vbox drivers because
I'm unable to compile them and they weren't obviously *not* a part of
some API. I also didn't change a couple of variables named,
e.g. "somethingIptables", because they were derived from the name of
the "iptables" command)
The virConnectOpenInternal method opens the libvirt client
config file and uses it to resolve things like URI aliases.
There may be driver specific things that are useful to
store in the config file too, so rather than have them
re-parse the same file, pass the virConfPtr down to the
drivers.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
So the idea is as follows: firstly we obtain a list of all the
luns, then iterate over it trying to find the one we want to work
with and after all the iterations we detect whether we have found
something. Now, the last check is broken, because it compares a
value form previous iteration, not the one we've just been
through.
Then, when computing md5 sum of lun's UUID, we use wrong variable
again. Well, @hostScsiDisk which is type of esxVI_HostScsiDisk
extends esxVI_ScsiLun type so they both have the uuid member, but
it just doesn't feel right to access the data via two different
variables in one function call.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch fixes an issue where screenshot API call was failing when
the esx/vcenter password contains special characters such as
apostrophee. The reason for failures was that passwords were escaped
for XML and stored in esxVI_Context which was then passed to raw CURL
API calls where the password must be passed in original form to
authenticate successfully. So this patch addresses this by storing
original passwords in the esxVI_Context struct and escape only for
esxVI_Login call.
A login session with the vSphere API might expire after some idle time.
The esxVI_EnsureSession function uses the SessionIsActive function to
check if the current session has expired and a relogin needs to be done.
But the SessionIsActive function needs the Sessions.ValidateSession
privilege that is considered as an admin level privilege.
Only vCenter actually provides the SessionIsActive function. This results
in requiring an admin level privilege even for read-only operations on
a vCenter server.
ESX and VMware Server don't provide the SessionIsActive function and
the code already works around that. Use the same workaround for vCenter
again.
This basically reverts commit 5699034b65.
The virDomainSnapshotDefFormat calls into virDomainDefFormat,
so should be providing a non-NULL virCapsPtr instance. On the
qemu driver we change qemuDomainSnapshotWriteMetadata to also
include caps since it calls virDomainSnapshotDefFormat.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
And use the newly added caps->host.netprefix (if it exists) for
interface names that match the autogenerated target names.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
This change ensures to call driver specific post-parse code to modify
domain definition after parsing hypervisor config the same way we do
after parsing XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Our domain_conf.* files are big enough. Not only they contain XML
parsing code, but they served as a storage of all functions whose
name is virDomain prefixed. This is just wrong as it gathers not
related functions (and modules) into one big file which is then
harder to maintain. Split virDomainObjList module into a separate
file called virdomainobjlist.[ch].
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tool such as libguestfs need the datacenter path to get access to disk
images. The ESX driver knows the correct datacenter path, but this
information cannot be accessed using libvirt API yet. Also, it cannot
be deduced from the connection URI in a robust way.
Expose the datacenter path in the domain XML as <vmware:datacenterpath>
node similar to the way the <qemu:commandline> node works. The new node
is ignored while parsing the domain XML. In contrast to <qemu:commandline>
it is output only.
This needs to specified in way too many places for a simple validation
check. The ostype/arch/virttype validation checks later in
DomainDefParseXML should catch most of the cases that this was covering.
Before this patch, when connected via vCenter, the free memory returned
was from the resorcePool (usually a cluster). This is in conflict with
e.g esxNodeGetInfo which always pulls info from the ESX host.
Since libvirt ESX driver works primarily with ESX hosts, this patch
changes esxNodeGetFreeMemory to pull that information from ESX host so
it's consistent with behavior of esxNodeGetInfo.
Return 0 instead of ERR_NO_SUPPORT in each driver
where we don't support managed save or -1 if
the domain does not exist.
This avoids spamming daemon logs when 'virsh dominfo' is run.
https://bugzilla.redhat.com/show_bug.cgi?id=1095637
For stateless, client side drivers, it is never correct to
probe for secondary drivers. It is only ever appropriate to
use the secondary driver that is associated with the
hypervisor in question. As a result the ESX & HyperV drivers
have both been forced to do hacks where they register no-op
drivers for the ones they don't implement.
For stateful, server side drivers, we always just want to
use the same built-in shared driver. The exception is
virtualbox which is really a stateless driver and so wants
to use its own server side secondary drivers. To deal with
this virtualbox has to be built as 3 separate loadable
modules to allow registration to work in the right order.
This can all be simplified by introducing a new struct
recording the precise set of secondary drivers each
hypervisor driver wants
struct _virConnectDriver {
virHypervisorDriverPtr hypervisorDriver;
virInterfaceDriverPtr interfaceDriver;
virNetworkDriverPtr networkDriver;
virNodeDeviceDriverPtr nodeDeviceDriver;
virNWFilterDriverPtr nwfilterDriver;
virSecretDriverPtr secretDriver;
virStorageDriverPtr storageDriver;
};
Instead of registering the hypervisor driver, we now
just register a virConnectDriver instead. This allows
us to remove all probing of secondary drivers. Once we
have chosen the primary driver, we immediately know the
correct secondary drivers to use.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Clang found possible dereference of NULL pointer which is right.
Function 'esxVI_LookupTaskInfoByTask' should find a task info. The issue
is that we could return 0 and leave 'taksInfo' pointer NULL because if
there is no match we simply end the search loop end set 'result' to 0.
Every caller count on the fact that if the return value is 0 than it's
safe to dereference 'taskInfo'. We should return 0 only in case we found
something and the '*taskInfo' is not NULL.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The virDomainDefineXMLFlags and virDomainCreateXML APIs both
gain new flags allowing them to be told to validate XML.
This updates all the drivers to turn on validation in the
XML parser when the flags are set
The virDomainDefParse* and virDomainDefFormat* methods both
accept the VIR_DOMAIN_XML_* flags defined in the public API,
along with a set of other VIR_DOMAIN_XML_INTERNAL_* flags
defined in domain_conf.c.
This is seriously confusing & error prone for a number of
reasons:
- VIR_DOMAIN_XML_SECURE, VIR_DOMAIN_XML_MIGRATABLE and
VIR_DOMAIN_XML_UPDATE_CPU are only relevant for the
formatting operation
- Some of the VIR_DOMAIN_XML_INTERNAL_* flags only apply
to parse or to format, but not both.
This patch cleanly separates out the flags. There are two
distint VIR_DOMAIN_DEF_PARSE_* and VIR_DOMAIN_DEF_FORMAT_*
flags that are used by the corresponding methods. The
VIR_DOMAIN_XML_* flags received via public API calls must
be converted to the VIR_DOMAIN_DEF_FORMAT_* flags where
needed.
The various calls to virDomainDefParse which hardcoded the
use of the VIR_DOMAIN_XML_INACTIVE flag change to use the
VIR_DOMAIN_DEF_PARSE_INACTIVE flag.
Since virDomainFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Store version numbers in this format
version = 1000000 * major + 1000 * minor + micro
produced by virParseVersionString instead of dedicated enums.
Split the complex esxVI_ProductVersion enum into a simpler
esxVI_ProductLine enum and a product version number.
Relax API and product version number checks to accept everything that
is equal or greater than the supported minimum version. VMware ESX
went through 3 major versions and the vSphere API always stayed
backward compatible. This commit assumes that this will also be true
for future VMware ESX versions.
Also reword error messages in esxConnectTo* to say what was expected
and what was found instead (suggested by Richard W.M. Jones).
Since the secondary drivers are only active when the primary
driver is also the ESX driver, there is no need to use the
different type specific privateData fields.
To prepare for introducing a single global driver, rename the
virDriver struct to virHypervisorDriver and the registration
API to virRegisterHypervisorDriver()
This implementation uses the https://esx-server/screen?id=<id> way to get
a screenshot of a running domain. Compared to the CreateScreenshot_Task
way this works since ESX 2.5 while CreateScreenshot_Task was added in
version 4.0.
The newly added libcurl stream driver is used to directly provide the
downloaded data without saving it to a temporary file first.
This allows to implement libvirt functions that use streams, such as
virDoaminScreenshot, without the need to store the downloaded data in
a temporary file first. The stream driver directly interacts with
libcurl to send and receive data.
The driver uses the libcurl multi interface that allows to do a transfer
in multiple curl_multi_perform() calls. The easy interface would do the
whole transfer in a single curl_easy_perform() call. This doesn't work
with the libvirt stream API that is driven by multiple calls to the
virStreamSend() and virStreamRecv() functions.
The curl_multi_wait() function is used to do blocking operations. But it
was added in libcurl 7.28.0. For older versions it is emulated using the
socket callback of the multi interface.
The current driver only supports blocking operations. There is already
some code in place for non-blocking mode but it is not complete.
Replace:
if (virBufferError(&buf)) {
virBufferFreeAndReset(&buf);
virReportOOMError();
...
}
with:
if (virBufferCheckError(&buf) < 0)
...
This should not be a functional change (unless some callers
misused the virBuffer APIs - a different error would be reported
then)
