Proposed formal coding conventions encourage defining typedefs for
vir[Blah] and vir[Blah]Ptr separately from the associated struct named
_vir[Blah]:
typedef struct _virBlah virBlah;
typedef virBlah *virBlahPtr;
struct _virBlah {
...
};
At some point in the past, I had submitted several patches using a
more compact style that I prefer, and they were accepted:
typedef struct _virBlah {
...
} virBlah, *virBlahPtr;
Since these are by far a minority among all struct definitions, this
patch changes all those definitions to reflect the style prefered by
the proposal so that there is 100% consistency.
After the system has been booted, it should not change.
Cache the return value of virSystemdHasMachined.
Allow starting and terminating machines with just one
DBus call, instead of three, reducing the chance of
the call timing out.
Also introduce a small function for resetting the cache
to be used in tests.
Both virSystemdTerminateMachine and virSystemdCreateMachine
propagate the error to tell between a non-systemd system
and a hard error.
In virSystemdGetMachineNameByPID both are treated the same,
but an error is ignored by the callers.
Split out the checks into a separate function.
Make common helpers testNetworkObjFindByUUID and testStoragePoolObjFindByUUID
which will replace the repeated patter for each to find objects by UUID.
As a bonus, the error message processing will also provide the failed uuidstr
rather than a generic error message.
Rather than have multiple places using the same pattern to find
a network by name using virNetworkObjFindByName, create a common
helper which will provide a consistent error message as well.
Rather than have continued repeated sequences of :
testDriverLock()
xxx = vir*ObjFindByName()
testDriverUnlock()
if (xxx == NULL) {
virReportError
goto cleanup;
}
Make some common helpers which will use the pattern and make a single
reference using a single common error message.
Altered for Interfaces, Storage Pools, Storage Volumes, and Node Devices.
For each the common error message can now also indicate which 'name' was
not found. For Storage Volumes, the "new" error will be more specific
rather than just invalid argument.
In an effort to be consistent with the source module, alter the function
prototypes to follow the similar style of source with the "type" on one
line followed by the function name and arguments on subsequent lines with
with argument getting it's own line.
Alter the format of the code to follow more recent style guidelines of
two empty lines between functions, function decls with "[static] type"
on one line followed by function name with arguments to functions each
on one line.
Now that we have some qemuSecurity wrappers over
virSecurityManager APIs, lets make sure everybody sticks with
them. We have them for a reason and calling virSecurityManager
API directly instead of wrapper may lead into accidentally
labelling a file on the host instead of namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The implementation matches virStringListFreeCount. The only difference
between the two functions is the ordering of their parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Changes in commit id 'dec6d9df' caused a compilation failure on a RHEL6
CI build environment. So just replace 'system' with 'syscap' as a name.
cc1: warnings being treated as errors
../../src/conf/node_device_conf.c: In function 'virNodeDevCapSystemParseXML':
../../src/conf/node_device_conf.c:1415: error: declaration of 'system' shadows a global declaration [-Wshadow]
In an effort to be consistent with the source module, alter the function
prototypes to follow the similar style of source with the "type" on one
line followed by the function name and arguments on subsequent lines with
with argument getting it's own line.
Alter the format of the code to follow more recent style guidelines of
two empty lines between functions, function decls with "[static] type"
on one line followed by function name with arguments to functions each
on one line.
Move all the NodeDeviceObj API's into their own module virnodedeviceobj
from the node_device_conf
Purely code motion at this point, plus adjustments to cleanly build.
AArch64 kernels are technically capable of running armv7l binaries.
Though some vendors disable this feature during kernel build, we
need to allow it in LXC.
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
All existing Haswell CPUID data were gathered from CPUs with broken TSX.
Let's add new data for Haswell with correct TSX implementation.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
All Intel Haswell processors (except Xeon E7 v3 with stepping >= 4) have
TSX disabled by microcode update. As not all CPUs are guaranteed to be
patched with microcode updates we need to explicitly disable TSX on
affected CPUs to avoid its accidental usage.
https://bugzilla.redhat.com/show_bug.cgi?id=1406791
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The original test didn't use family/model numbers to make better
decisions about the CPU model and thus mis-detected the model in the two
cases which are modified in this commit. The detected CPU models now
match those obtained from raw CPUID data.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Converted by running the following command, renaming the files as
*.new, and committing only the *.new files.
(cd tests/cputestdata; ./cpu-convert.py *.json)
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Instantiating "host" CPU and querying it using qom-get has been the only
way of probing host CPU via QEMU until 2.9.0 implemented
query-cpu-model-expansion for x86_64. Even though libvirt never really
used the old way its result can be easily converted into the one
produced by query-cpu-model-expansion. Thus we can reuse the original
test data and possible get new data from hosts where QEMU does not
support the new QMP command.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The static CPU model expansion is designed to return only canonical
names of all CPU properties. To maintain backwards compatibility libvirt
is stuck with different spelling of some of the features, but we need to
use the full expansion to get the additional spellings. In addition to
returning all spelling variants for all properties the full expansion
will contain properties which are not guaranteed to be migration
compatible. Thus, we need to combine both expansions. First we need to
call the static expansion to limit the result to migratable properties.
Then we can use the result of the static expansion as an input to the
full expansion to get both canonical names and their aliases.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Querying "host" CPU model expansion only makes sense for KVM. QEMU 2.9.0
introduces a new "max" CPU model which can be used to ask QEMU what the
best CPU it can provide to a TCG domain is.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
While query-cpu-model-expansion returns only boolean features on s390,
but x86_64 reports some integer and string properties which we are
interested in.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
While reviewing a patch from Andrea that modified this test case, I
realized that although it was "properly failing" (it's a negative
test), that it was failing for the wrong reason (the MULTIFUNCTION cap
wasn't set in the test case, so it was saying that multifunction=on
wasn't supported by the QEMU binary; instead it should have been
complaining that it had run out of PCI slots of the appropriate type
and couldn't automatically add any more).
This improper failure had started when I added the patch to
automatically aggregate pcie-root-ports onto multiple functions of
each pcie-root slot, but I hadn't noticed it because the test still
failed.
This patch corrects the test case to 1) set the MULTIFUNCTION flag in
the caps, and 2) attempt to add 241 pcie-root-ports to a domain. Since
there are 30 slots available on a pcie-root (slot 0 is reserved, and
slot 31 is used by the integrated SATA controller), and a
pcie-root-port can only be placed on a function of a slot on
pcie-root, the maximum number of pcie-root-ports in any domain is 240.
The build system for libvirt correctly detects the location of blkid
using PKG_CONFIG_PATH environment variable. The file blkid.pc states
that the include flags should be: 'Cflags: -I${includedir}/blkid' but
libvirt searches for blkid.h inside ${includedir}/blkid/blkid, which is
wrong. Until now, the compilation for libvirt succeeded because of pure
luck, as it had -I/usr/include as a CFLAG. This issue was faced while
compiling libvirt on Ubuntu 16.04.2 with bare minimum dev packages and a
custom compiled blkid kept in a non-standard $prefix.
Signed-off-by: Nehal J Wani <nehaljw.kkd1@gmail.com>
The generated HTML will contain <ul></ul> otherwise, which
triggers an error during 'make check'.
The proper fix would be not to generate the problematic
HTML in the first place but, while I'm working on it, this
workaround will do.
