Console/channel devices have their pty devices assigned when the emulator is
actually started. If time is spent in guest preparation, someone attempts
to open the console/channel, the libvirt crashes in virChrdevLockFilePath().
The patch attempts to fix the crash by adding a check before attempting to
open.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
There was a couple of problems with the style fixes applied to the original
patch:
1.) virFileReadAllQuiet comparison was incorrectly parenthesized when moved
into a condition, causing the len to be set to the result of comparison. This,
together with the removed underflow check would underflow the phy buffer.
2.) The logic was broken. Failure to call "ip" would abort the function, thus
the "iw" branch would never be reached.
This aims to fix the issues and work around possible style complains :)
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Refactor the function to return the bitmap instead of an integer and the
inner workings so that they make more sense.
This patch also fixes possible segfault on old systems that was
introduced by commit:
commit f1a43a8e41
Author: Hu Tao <hutao@cn.fujitsu.com>
Date: Fri Sep 14 15:46:59 2012 +0800
use virBitmap to store cpu affinity info
Since commit 55ace7c478, the sockettest
fails without VIR_TEST_DEBUG set. The problem is found by test number
42 (co-incidence?), which tests range '192.168.122.1' -
'192.168.122.255' in network '192.168.122.0/24'. That is supposed to
fail because the end address is equal to the broadcast address.
When comparing these two in 'virSocketAddrEqual(end, &broadcast)',
there is a check for sin_addr as well as for sin_port. That port,
however, is different when we do not enable test debugging. With the
testing enabled, the port is 0 (correctly initialized), but without that
it has a random number there. And that's because the structure is not
initialized anywhere.
By zeroing the structure before filling in the info, we make sure we
return only the address and not any information that was not requested.
And the test work once again.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When watching a job (save, managedsave, dump, migrate) virsh spawns a
thread to call the appropriate API and waits for the result while
watching for interruption signals (SIGINT, Ctrl-C on the terminal).
Whenever such signal is caught, virsh calls virDomainAbortJob, stops
waiting for the job, and returns the result of virDomainAbortJob.
This is wrong because the job might have finished in the meantime or it
might have been cancelled by someone else and virsh would just report
the failure to abort the job. However, we are not interested in the
virDomainAbortJob's result at all, we need to keep waiting for the main
job to finish and report its result instead.
https://bugzilla.redhat.com/show_bug.cgi?id=1131755
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Since the monitor code now supports ullongs when setting balloon size,
drop the legacy code with overflow checking.
Additionally the comment mentioning that the job is treated as a sync
job does not make sense any more since the monitor is entered
asynchronously.
Since some functions can be optimized by reusing the buffers that they
already have instead of allocating and copying new ones, lets split
virBitmapToData to two functions where one only converts the data and
the second one is a wrapper that allocates the buffer if necessary.
Store the emulator pinning cpu mask as a pure virBitmap rather than the
virDomainPinDef since it stores only the bitmap and refactor
qemuDomainPinEmulator to do the same operations in a much saner way.
As a side effect virDomainEmulatorPinAdd and virDomainEmulatorPinDel can
be removed since they don't add any value.
In case when <vcpu ... cpuset=""> is not specified, the vcpupin array is
not guaranteed to be allocated to def->vcpus. This would cause a crash
for TCG since it does not report thread IDs for vCPUs.
We remember driver name in a new field 'drivername' within
private parallels connection structure. When a new domain
is defined we use this name to set corresponding virtType.
We set VIR_DOMAIN_VIRT_VZ for 'vz' driver and
VIR_DOMAIN_VIRT_PARALLELS for 'Parallels'.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
Though parallels:///system is still accepted we will encourage users
to use vz:///system instead.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
We add this connection driver just as an exact copy with different
name to keep backward compatibility.
Vz stands for Virtuozzo, which is a new name of Parallels Cloud Server.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
If 'parallels:///system' uri is specified then connection is made to
'Parallels' driver and domain type will be VIR_DOMAIN_VIRT_PARALLELS.
In case of 'vz:///system' connection is established to 'vz' driver
and domain type will be VIR_DOMAIN_VIRT_VZ.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
As soon as we keep backward compatibility we treat this constant
as synonym to VIR_DOMAIN_VIRT_PARALLELS.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
Commit id '980b265d' neglected to check for a successful status when
deciding whether to release the device address for the RNG attach thus
the address would be released even though the device was added.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Commit id '862473fa' neglected to return the status from the
qemuDomainRemoveRNGDevice call in qemuDomainRemoveDevice causing
the function to always fail when receiving an RNG device unplug
event. Additionally the domain status/state would not be updated
in the processDeviceDeletedEvent path.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Newer binutils 'ar' has added an option 'D' for deterministic
builds, and at least on rawhide, this option is enabled by default.
But it conflicts with the 'u' optimization where the linker only
modifies libraries based on file timestamps, but can result in
different library ordering based on which files were touched last.
Thus, it results in some noisy compilation, for every CCLD line:
CCLD libvirt_driver_qemu_impl.la
ar: `u' modifier ignored since `D' is the default (see `U')
Upstream automake has decided that defaulting ARFLAGS to 'cru' is
no longer beneficial, and that switching the default to 'cr' will
both silence the noise and not penalize modern build systems.
https://lists.gnu.org/archive/html/automake-patches/2015-06/msg00000.html
But rather than wait for newer automake to propagate to all systems
that already have newer binutils, we might as well just use the new
default ourselves, even on older platforms.
* configure.ac: Default AR[_]FLAGS to 'cr', not 'cru'.
Signed-off-by: Eric Blake <eblake@redhat.com>
There are now many more reasons that virSocketAddrGetRange() could
fail, so it is much more informative to report the error there instead
of in the caller. (one of the two callers was previously assuming
success, which is almost surely safe based on the parsing that has
already happened to the config by that time, but it still is nicer to
account for an error "just in case")
Part of fix for: https://bugzilla.redhat.com/show_bug.cgi?id=985653
This loop had automatic variable definitions mixed with code. This
patch moves the definitions to the top of the function and puts
cleanup for them at the bottom. No functional change.
Part of fix for: https://bugzilla.redhat.com/show_bug.cgi?id=985653
virSocketAddrGetRange() has been updated to take the network address
and prefix, and now checks that both the start and end of the range
are within that network, thus validating that the entire range of
addresses is in the network. For IPv4, it also checks that ranges to
not start with the "network address" of the subnet, nor end with the
broadcast address of the subnet (this check doesn't apply to IPv6,
since IPv6 doesn't have a broadcast or network address)
Negative tests have been added to the network update and socket tests
to verify that bad ranges properly generate an error.
This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=985653
This was revealed when I made a cut-paste mistake in an upgrade to
virSocketAddrGetRange(), leading to failure to check for the end
address being outside of the defined network, but a negative test case
that should have caught the error instead returned success.
The problem was that testRange in sockettest.c was written so that
when it expected a failure, even an "unexpected success" would be
considered as an "expected failure" because of the way the check in
testRange was done. testRange had this:
if (gotsize < 0 || gotsize != size) {
return pass ? -1 : 0;
} else {
return pass ? 0 : -1;
}
but all the tests that expected a failure give "-1" as the expected
size. So in a case where we expect a failure, we would have pass ==
false and size == -1. If virSocketAddrGetRange() was incorrectly
*successful* (returned some positive number), then "gotsize != size"
would be, e.g. "276 != -1", so we would take the if clause and, since
pass == false, we would return 0 (success i.e. expected failure).
The solution is that in the case where we expect failure, we should
just ignore size - virSocketAddrGetRange() must return -1 in order for
us to report "expected failure == success".
Part of fix for: https://bugzilla.redhat.com/show_bug.cgi?id=985653
This will allow us to use vshError() to report errors from inside
vshCommandOpt*(), instead of replicating the same logic and error
messages all over the place.
We also have more context inside the vshCommandOpt*() functions,
for example the actual value used on the command line, which means
we can produce more detailed error messages.
vshCommandOptBool() is the exception here, because it's explicitly
designed not to report any error.
The new tests deal with numeric options of three kinds: regular,
scaled and timeouts. For each, both valid and invalid inputs
are provided, hopefully covering all cases: this should allow us
to avoid regressions when changing the relevant code in virsh.
We do update pool volume object list before we actually create any
volume. If buildVol fails, we then try to delete the volume in the
storage as well as remove it from our structures. The problem is, that
any backend that supports both buildVol and deleteVol would fail in this
case which is completely unnecessary. This patch causes the update to
take place after we know a volume has been created successfully, thus no
removal in case of a buildVol failure is necessary.
https://bugzilla.redhat.com/show_bug.cgi?id=1223177
We allocate 16 bytes for IPv4 address and 55 bytes for interface
key, therefore we should read up to 15/54 bytes and let the last byte
reserved for terminating null byte in sscanf.
https://bugzilla.redhat.com/show_bug.cgi?id=1226400
Incorporates fixes for cross-compiling to mingw on rawhide, where
gcc 5.1 changes detection of how to properly determine PRIdMAX.
Also picks up some improvements for compilation on Mac OS X.
* .gnulib: Update to latest, for at least mingw.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit 198cc1d3 introduced libxl-lockd and libxl-sanlock config
files but forgot to add them to the spec file. Follow-up commit
62b18d98 added the files to daemon-driver-libxl, but missed adding
them to the daemon package when configuring libvirt
--without-driver-modules. In addition, commit 62b18d98 added
libxl-sanlock to daemon-driver-libxl, but it should be included
in lock-sanlock when libvirt is configured --with-sanlock.
