The libxl driver will handle all domain destruction and cleanup
when receiving a domain shutdown event from libxl. Commit fa30ee04a2
introduced the ignoreDeathEvent boolean in the DomainObjPrivate struct
to ignore subsequent death events from libxl. But libxl already provides
a mechanism to disable death events via libxl_evdisable_domain_death.
This patch partially reverts commit fa30ee04a2 and instead uses
libxl_evdisable_domain_death to disable subsequent death events when
processing a shutdown event.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In qemuConnectGetAllDomainStats() there a loop that iterates over
all domains that stats are to be fetched for. Within this loop
the qemuDomainGetStats() is called which is responsible for
fetching stats for an individual domain. Now, the code that
handles successful and failure cases is almost the same. Rework
it, so that the code is deduplicated. Note, that the check for
!tmp is dropped because upon successful return from
qemuDomainGetStats() it is always allocated.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since f29d7c3e69 we have an option for checking capabilities
required for given type of statistics upfront, instead of the
callback. Switch qemuDomainGetStatsIOThread() callback to the new
style.
This will now error out properly if user requests IOTHREAD stats
forcibly (via VIR_CONNECT_GET_ALL_DOMAINS_STATS_ENFORCE_STATS
flag) but QEMU doesn't support IOThreads. Previously, this was
silently ignored.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The idea of queryDirtyRateRequired[] is that it lists QEMU
capabilities required for given domstats record
(VIR_DOMAIN_STATS_DIRTYRATE in this particular case) and
QEMU_CAPS_LAST is used as a sentinel. Therefore, there can never
be anything after it. Drop the comma to make it more obvious.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For some weird reason we are ignoring errors when creating veth
pair that netlink reports. This affects the LXC driver which
creates interfaces for container in
virLXCProcessSetupInterfaces(). If creating a veth pair fails, no
error is reported and the control jumps onto cleanup label where
some cryptic error message is reported instead (something about
inability to remove veth pair).
Let's report error that netlink returned - it's probably the most
accurate reason anyways.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/225
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The generic "rpc-worker" name becomes a name of the associated task,
which may than appear in logs and bring some confusion. Let's add a
server name to it so that one can easily see which daemon the task
belongs to, which is especially useful for split daemons. And since the
name would be too long, we can drop the "-worker" part and just keep it
as "rpc-*" and "prio-rpc-*".
Such confusing entries can, for example, be found in audit log when
SELinux is complaining that "rpc-worker" was denied access to something.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The file used a pretty inconsistent style for formatting function
headers. Return types were both separate and on the same line as
function names and functions were separated by one, two, and sometimes
even three empty lines. Let's make it consistent by honoring our
preferred coding style.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently virThreadPoolNewFull relies on the caller to ensure the job
name outlives the thread pool. Which basically enforces static strings.
Let's drop this implicit requirement by making a copy of the job name.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We pass through to glib's hash table functions so we can also use glibs
function prototype definition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The code was converted to stop using this function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Use 'g_clear_pointer(&ptr, g_hash_table_unref)' instead.
In few instances it allows us to also remove explicit clearing of
pointers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Use separate automatically cleared variables for the x86_64 and s390
versions of the QAPI schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Additionally we no longer need the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
'blockNamedNodeData' is declared for automatic freeing but we also free
it manually and reuse which is a code pattern we don't normally allow.
Rewrite the code to have actually two separate hash tables.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
No need for the cleanup section once we switch to g_autoptr.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Allocate the hash table only after the log file is opened so that we
don't need to deallocate it on failure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
After the conversion to g_autofree, the cleanup label is no longer
needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The function is used also to compare virStorageSource which may not be
resolved to the image at that point in which case the 'path' is not yet
populated and the actual type is not yet set. This means that the
function fails to consider two identical volume-based disks as pointing
to the same thing.
Add a special case for both images being type=volume in which case we
compare only the pool/volume names.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/240
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
It makes it easier to see what's going on when trying to figure out why
the disk definition was not updated on a finalized blockjob.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In other places we use strspn to validate a character subset. Convert
the in-place loop and simplify the error message.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new STRLIM macro and unify it with the empty string check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As a microoprimization when checking whether length of a string fits
into a limit we don't necessarily need to calculate the full length but
can use strnlen to check only LIMIT+1 chars. Add a macro which will
simplify the expressions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reduce the extent of custom logic and custom error messages by using
virXMLPropTristateBool.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The helpers will update the passed boolean if the tristate's value is
not _ABSENT.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The run script tries to detect when a daemon is being run in order to
shutdown other systemd unit files that clash. As implemented this
only works if the daemon name is the first argument. This won't be the
case if running via GDB or strace eg
./run strace -e trace=openat ./build/src/virtqemud
We need to check all argv to find which might be a daemon path/name.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The domain capabilities won't report TPM support unless SWTPM can be
initialized. To avoid relying on the swtpm install in the host, mock
the entire initialization method, since all it needs todo is return
a non-error value.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This reports what TPM features QEMU supports, provided that swtpm is
installed in the host.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This adds reporting of available TPM models and backends to the domain
capabilities schema
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The QEMU domain capabilities code wants to quietly know whether swtpm is
available on the host.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Many methods merely want to know that the swtpm binaries have been
found, and don't care about probing for capabilities. Even when
starting a guest, the QEMU driver may not need the capabilities.
Skipping probing ensures the VM startup path is as fast as possible
when capabilities are not required. It also removes various error
scenarios from the main init method.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virTPMEmulatorInit method updates various global variables
and holds a lock while doing so. Other methods which access
these variables, however, don't reliably hold locks over all
of their accesses.
Since virTPMEmulatorInit is no longer exported, we can push
the locking up into all the callers and achieve proper safety
for concurrent usage.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Every other exported API from virtpm.h will internally call
virTPMEmulatorInit, so there is no reason for this initializer
to be exported on its own.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virTPMEmulatorInit function defines a struct that gets filled with
pointers to global variables. It will be simpler to just use the struct
for the global variables directly.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The TPM helper methods for querying the binary path and capabilities
have the same patterns across all swtpm binaries. This code duplication
can be reduced by introducing helper methods.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>