Since the daemon can manage and add (at fresh start) multiple servers,
we also should be able to add them from a JSON state file in case of a
daemon restart, so post exec restart support for multiple servers is also
provided. Patch also updates virnetdaemontest accordingly.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The method will now return 0 on success and -1 on error, rather than number of
items which it iterated over before it returned back to the caller. Since the
only place where we actually check the number of elements iterated is in
virhashtest, return value of 0 and -1 can be a pretty accurate hint that it
iterated over all the items. However, if we really want to know the number of
items iterated over (like virhashtest does), a counter has to be provided
through opaque data to each iterator call. This patch adjusts return value of
virHashForEach, refactors the body, so it returns as soon as one of the
iterators fail and adjusts virhashtest to reflect these changes.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Our existing virHashForEach method iterates through all items disregarding the
fact, that some of the iterators might have actually failed. Errors are usually
dispatched through an error element in opaque data which then causes the
original caller of virHashForEach to return -1. In that case, virHashForEach
could return as soon as one of the iterators fail. This patch changes the
iterator return type and adjusts all of its instances accordingly, so the
actual refactor of virHashForEach method can be dealt with later.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
When adding disk images to ACL we may call those functions on NFS
shares. In that case we might get an EACCES, which isn't really relevant
since NFS would not hold a block device. This patch adds a flag that
allows to stop reporting an error on EACCES to avoid spaming logs.
Currently there's no functional change.
Since commit 47e5b5ae virCgroupAllowDevice allows to pass -1 as either
the minor or major device number and it automatically uses '*' in place
of that. Reuse the new approach through the code and drop the duplicated
functions.
After removing capability check for fd migration the code that was left
behind didn't make quite sense. The old exec migration would be used in
case when pipe() failed. Remove the old code and make failure of pipe()
a hard error.
This additionally removes usage of virCgroupAllowDevicePath outside of
qemu_cgroup.c.
Since no value in the virGICVersion enumeration is negative, a clever
enough compiler can report an error such as
src/conf/domain_conf.c:15337:75: error: comparison of unsigned enum
expression < 0 is always false [-Werror,-Wtautological-compare]
if ((def->gic_version = virGICVersionTypeFromString(tmp)) < 0 ||
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~
virGICVersionTypeFromString() can, however, return a negative value if
the input string is not part of the enumeration, so we definitely need
that check.
Work around the problem by storing the return value in a temporary int
variable.
Create new modules qemu_domain_address.c and qemu_domain_address.h to
contain all the new functions and header data. Additionally move any
supporting static functions.
Make qemuDomainSupportsPCI non static.
Also, move and rename the following:
qemuSetSCSIControllerModel to qemuDomainSetSCSIControllerModel
qemuCollectPCIAddress to qemuDomainCollectPCIAddress
qemuValidateDevicePCISlotsPIIX3 to qemuDomainValidateDevicePCISlotsPIIX3
qemuAssignDevicePCISlots to qemuDomainAssignDevicePCISlots
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move the misplaced function from qemu_command.c to qemu_interface.c
since it's closer in functionality there and had less to do with building
the command line.
Rename function to qemuInterfaceBridgeConnect and modify callers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move the misplaced function from qemu_command.c to qemu_interface.c
since it's closer in functionality there and had less to do with building
the command line.
Rename function to qemuInterfaceDirectConnect and modify callers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move function closer to where it's used in qemuBuildTPMCommandLine
Also fix function header to match current coding practices
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move function closer to where it's called in qemuBuildTPMCommandLine
Also adjust function header to fit current coding guidelines
Signed-off-by: John Ferlan <jferlan@redhat.com>
Test all kinds of scenarios, including guests asking for GIC but
failing to specify a version, guests specifying an invalid version
and guests trying to use GIC with non-virt or even non-ARM machines.
Unify the naming to prepare for new test cases that will be added
later on.
Convert a couple of output XML files for the qemuxml2xml test to
symlinks while at it, since they were identical to the corresponding
input XML files anyways.
Moreover, since we're only interested in testing GIC support here,
simplify XML files by getting rid of the unrelevant bits.
This change allows to use "host" as a GIC version in the domain XML.
Since we'll need to update the virGICVersion enumeration to support
new GIC versions anyway, it makes sense to be a bit more strict in
the schema as well and reject values that are not in the enumeration.
We currently blindly accept any numeric value as a GIC version, even
though only GIC v2 and GIC v3 actually exist; on the other hand, we
reject "host", which is a perfectly legitimate value for QEMU guests.
This new enumeration contains all GIC versions libvirt is aware of.
Currently, on hot unplug of PCI devices with VFIO driver for QEMU, libvirt is
trying to restore the host devices to it's previous value (basically a chown
on the previous user/group).
However for devices with VFIO driver, when the device is unbinded it is
removed from the /dev/vfio file system causing the restore label to fail.
The fix is to not restore the label for those PCI devices since they are going
to be teared down anyway.
Signed-off-by: Ludovic Beliveau <ludovic.beliveau@windriver.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The macro would eat the first parameter. In some cases the format string
for vshPrint was eaten. In other cases the calls referenced variables
which did not exist in the given context. Avoid errors by doing compile
time checking.
When we hit OOM it doesn't really make sense to format the error message
by attempting to allocate it. Introduce a simple helper that prints a
static message and terminates the execution.
The existing log messages for this have several problems; there are
two lines of log when one will suffice, they duplicate the function
name in log message (when it's already included by VIR_DEBUG), they're
missing some useful bits, they get logged even when the call is a NOP.
This patch cleans up the problems with those existing logs, and also
adds a new VIR_INFO-level log down at the function that is actually
creating and sending the netlink message that logs *everything* going
into the netlink message (which turns out to be much more useful in
practice for me; I didn't want to eliminate the logs at the existing
location though, in case they are useful in some scenario I'm
unfamiliar with; anyway those logs are remaining at debug level, so it
shouldn't be a bother to anyone).
There are three functions that deal with allocating and freeing
devices from a networks netdev/pci device pool:
network(Allocate|Notify|Release)ActualDevice(). These functions also
maintain a counter of the number of domains currently using a network
(regardless of whether or not that network uses a device pool). Each
of these functions had multiple log messages (output using VIR_DEBUG)
that were in slightly different formats and gave varying amounts of
information.
This patch creates a single function to log the pertinent information
in a consistent manner for all three of these functions. Along with
assuring that all the functions produce a consistent form of output
(and making it simpler to change), it adds the MAC address of the
domain interface involved in the operation, making it possible to
verify which interface of which domain the operation is being done for
(assuming that all MAC addresses are unique, of course).
All of these messages are raised from DEBUG to INFO, since they don't
happen that often (once per interface per domain/libvirtd start or
domain stop), and can be very informative and helpful - eliminating
the need to log debug level messages makes it much easier to sort
these out.
networkReleaseActualDevice() and networkNotifyActualDevice() both were
updating the individual devices' connections count in two separate
places (unlike networkAllocateActualDevice() which does it in a single
unified place after success:). The code is correct, but prone to
confusion / later breakage. All of these updates are anyway located at
the end of if/else clauses that are (with the exception of a single
VIR_DEBUG() in each case) immediately followed by the success: label
anyway, so this patch replaces the duplicated ++/-- instructions with
a single ++/-- inside a qualifying "if (dev)" down below success:.
(NB: if dev != NULL, by definition we are using a device (either pci
or netdev, doesn't matter for these purposes) from the network's pool)
The VIR_DEBUG args (which will be replaced in a followup patch anyway)
were all adjusted to account for the connection count being out of
date at the time.
Since Ceph version Infernalis (9.2.0) the new fast-diff mechanism
of RBD allows for querying actual volume usage.
Prior to this version there was no easy and fast way to query how
much allocation a RBD volume had inside a Ceph cluster.
To use the fast-diff feature it needs to be enabled per RBD image
and is only supported by Ceph cluster running version Infernalis
(9.2.0) or newer.
Without the fast-diff feature enabled libvirt will report an allocation
identical to the image capacity. This is how libvirt behaves currently.
'virsh vol-info rbd/image2' might output for example:
Name: image2
Type: network
Capacity: 1,00 GiB
Allocation: 124,00 MiB
Newly created volumes will have the fast-diff feature enabled if the
backing Ceph cluster supports it.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
In commit 0b15f920 there is a #ifdef which requires LIBRBD_VERSION_CODE
266 or newer for rbd_diff_iterate2()
rbd_diff_iterate2() is available since 266, so this if-statement should
require anything newer than 265.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
As more and more features are added to RBD volumes we will need to
call this method more often.
By moving it into a internal function we can re-use code inside the
storage backend.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Commit d82170d introduced a workaround for domtop: in that example
program, we define a symbol called ERROR for our own use, but since
a symbol with the same name is already defined in one of mingw's
header files, we get a warning when using that compiler.
domsuspend defines the same problematic symbol, so the workaround
has been copied over.
It is highly unlikely that a backend will know how to create a
volume from a different volume (buildVolFrom) and not know how to
create an empty volume (createVol). But:
1) we call the function without any prior check so if that's the
case we would SIGSEGV immediatelly
2) it's better to be safe than sorry.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Firstly, we realloc internal list to hold new item (=volume that
will be potentially created) and then we check whether we
actually know how to create it. If we don't we consume more
memory than we really need for no good reason.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We have the same argument to many other commands that produce an
XML based on what user typed. But unfortunately vol-create-as
was missing it. Maybe nobody had needed it yet. Well, I did
just now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The way we usually write functions is that we start the work and
if something goes bad we goto cleanup and roll back there. Or
just free resources that are no longer needed. Do the same here.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After the rework of mocking of our tests there's the
virportallocator test failing to link on mingw. Well, it's the
mocking library actually:
../gnulib/lib/.libs/libgnu.a(bind.o): In function `rpl_bind':
/home/jenkins/libvirt-mingw/build32/gnulib/lib/../../../gnulib/lib/bind.c:33: multiple definition of `rpl_bind'
.libs/virportallocatormock_la-virportallocatormock.o:/home/jenkins/libvirt-mingw/build32/tests/../../tests/virportallocatormock.c:79: first defined here
I've no idea why this matters to mingw and does not to others.
Nevertheless, if we make the test linux only the problem goes
away.
Apparently, our test for RTLD_NEXT is not sufficient because
mingw32 defines it. Lets put aside for a while fact that it has
the same value as RTLD_DEFAULT which by description has different
meaning, shall we?
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Race condition:
User calls defineXML to create new instance.
The main thread from vzDomainDefineXMLFlags() creates new instance by prlsdkCreateVm.
Then this thread calls prlsdkAddDomain to add new domain to domains list.
The second thread receives notification from hypervisor that new VM was created.
It calls prlsdkHandleVmAddedEvent() and also tries to add new domain to domains list.
These two threads call virDomainObjListFindByUUID() from prlsdkAddDomain() and don't find new domain.
So they add two domains with the same uuid to domains list.
This fix splits logic of prlsdkAddDomain() into two functions.
1. vzNewDomain() creates new empty domain in domains list with the specific uuid.
2. prlsdkLoadDomain() add data from VM to domain object.
New algorithm for creating an instance:
In vzDomainDefineXMLFlags() we add new domain to domain list by calling vzNewDomain()
and only after that we call CreateVm() to create VM.
It means that we "reserve" domain object with the specific uuid.
After creation of new VM we add info from this VM
to reserved domain object by calling prlsdkLoadDomain().
Before this patch prlsdkLoadDomain() worked in 2 different cases:
1. It creates and initializes new domain. Then updates it from sdk handle.
2. It updates existed domain from sdk handle.
In this patch we remove code which creates new domain from LoadDomain()
and move it to vzNewDomain().
Now prlsdkLoadDomain() only updates domain from skd handle.
In notification handler prlsdkHandleVmAddedEvent() we check
the existence of a domain and if it doesn't exist we add new domain by calling
vzNewDomain() and load info from sdk handle via prlsdkLoadDomain().
