The new forward mode 'open' is just like mode='route', except that no
firewall rules are added to assure that any traffic does or doesn't
pass. It is assumed that either they aren't necessary, or they will be
setup outside the scope of libvirt.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=846810
==18324== 32 bytes in 1 blocks are still reachable in loss record 41 of 114
==18324== at 0x4C2C070: calloc (vg_replace_malloc.c:623)
==18324== by 0x4EA479B: virAlloc (viralloc.c:144)
==18324== by 0x4EA674A: virBitmapNewQuiet (virbitmap.c:77)
==18324== by 0x4EA67F7: virBitmapNew (virbitmap.c:106)
==18324== by 0x4EC777D: dnsmasqCapsNewEmpty (virdnsmasq.c:801)
==18324== by 0x4EC781B: dnsmasqCapsNewFromBuffer (virdnsmasq.c:815)
==18324== by 0x407CF4: mymain (networkxml2conftest.c:99)
==18324== by 0x409CF0: virTestMain (testutils.c:982)
==18324== by 0x4080EA: main (networkxml2conftest.c:136)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch fixes a bug which occurs when we check a bus and unit number
for a new attached disk. We should do this check in ValidadionCallback,
not in PostParse callback. Because in PostParse we have not initialized
disk->info.addr.drive struct yet.
Move part of code from domainPostParseCallback to domainValidateCallback
and part from devicesPostParseCallback to deviceValidateCallback.
PostParse callbacks are for modification data.
ValidateCallbacks are only for checks.
While dettaching/attaching device in OpenStack, nova
calls vzDomainDettachDevice twice, because the update of the internal
configuration of the ct comes a bit latter than the update event.
As the result, we suffer from the second call to dettach the same device.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
If we are going to ignore return value of a functions
that can raise an error, it's not enough to use ignore_value
construction. We should explicitly call virResetLastError
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
First, make function logPrlEventErrorHelper be void and only
print information (if any) from an event.
Second, don't rewrite original error with any errors we get
during parsing event info.
Third, ignore PRL_ERR_NO_DATA at all.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
The script was returning success unless it failed on the last file.
This went unnoticed because sc_prohibit_long_lines forbids lines
longer than 90 characters in .arg[sv] files.
Check whether the disable-legacy property is present on the following
devices:
virtio-balloon-pci
virtio-blk-pci
virtio-scsi-pci
virtio-serial-pci
virtio-9p-pci
virtio-net-pci
virtio-rng-pci
virtio-gpu-pci
virtio-input-host-pci
virtio-keyboard-pci
virtio-mouse-pci
virtio-tablet-pci
Assuming that if QEMU knows other virtio devices where this property
is applicable, it will have at least one of these devices.
Added in QEMU by:
commit e266d421490e0ae83044bbebb209b2d3650c0ba6
virtio-pci: add flags to enable/disable legacy/modern
https://bugzilla.redhat.com/show_bug.cgi?id=1182074
Since libvirt still uses a legacy qemu arg format to add a disk, the
manner in which the 'password-secret' argument is passed to qemu needs
to change to prepend a 'file.' If in the future, usage of the more
modern disk format, then the prepended 'file.' can be removed.
Fix based on Jim Fehlig <jfehlig@suse.com> posting and subsequent
upstream list followups, see:
http://www.redhat.com/archives/libvir-list/2016-August/msg00777.html
for details. Introduced by commit id 'a1344f70'.
Modify virDomainDefGetVcpuSched to emit an error message if
virDomainDefGetVcpu returns NULL meaning the vcpu could not
be found. Prior to commit id '9cc931f0b' the error message
would have been issued in virDomainDefGetVcpu.
The code that setups listen types may change a listen type from address to
socket based on configuration from qemu.conf. This needs to be done before we
reserve/allocate ports that won't be used.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1364843
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Ports are valid only for listen types 'address' and 'network', other listen
types doesn't use them so we should not try to reserve any ports.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The first argument should be const char ** instead of
char **, because this is a search function and as such it
doesn't, and shouldn't, alter the haystack in any way.
This change means we no longer have to cast arrays of
immutable strings to arrays of mutable strings; we still
have to do the opposite, though, but that's reasonable.
When commit id '6dfb4507' refactored where the iothreadsched data was
stored, the error message for when the virDomainIOThreadIDFind failed
to find an iothreadid ("iothreadsched attribute 'iothreads' uses
undefined iothread ids") was lost. This led to the possibility that
someone would try to use it, but receive the generic message "An error
occurred, but the cause is unknown".
This patch adds the error message back so that someone will know that
they have an invalid configuration.
Signed-off-by: John Ferlan <jferlan@redhat.com>
All other modes of qemuDomainSetVcpusFlags have helpers so finish the
work by splitting the regular code into a new function.
This patch also touches up the coding (spacing) style.
If any of the devices referenced a USB hub that does not exist,
defining the domain would either fail with:
error: An error occurred, but the cause is unknown
(if only the last hub in the path is missing)
or crash.
Return a proper error instead of crashing.
https://bugzilla.redhat.com/show_bug.cgi?id=1367130
Mention whether it was the live or persistent definition which caused an
error reported and explicitly error out in case when attempting to set
maximum vcpu count for a live domain.
<filesystem type='ram' accessmode='passthrough'>
<source usage='524288' units='KiB'/>
<target dir='/dev/shm'/>
</filesystem>
would lead to lxcContainerMountAllFS calling STRPREFIX
on a NLL pointer because it failed to check if fs->src->path
was non-NULL. This is a regression caused by
commit da665fbd48
Author: Olga Krishtal <okrishtal@virtuozzo.com>
Date: Thu Jul 14 16:52:38 2016 +0300
filesystem: adds possibility to use storage pool as fs source
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
<filesystem type='ram' accessmode='passthrough'>
<source usage='524288' units='KiB'/>
<target dir='/dev/shm'/>
</filesystem>
would lead to lxcContainerResolveSymlinks calling
access(NULL) because it failed to check if fs->src->path
was non-NULL. This is a regression caused by
commit da665fbd48
Author: Olga Krishtal <okrishtal@virtuozzo.com>
Date: Thu Jul 14 16:52:38 2016 +0300
filesystem: adds possibility to use storage pool as fs source
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Because of change in caaa1bd357 this macro is no under
#ifdef block. That means it needs to be re-intended correctly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 11567cf added some libxl tests into domaincapstest and
added libvirt_driver_libxl_impl.la to domaincapstest_LDADD.
This causes link fail on systems without GNU regex implementation:
gmake[2]: Entering directory '/usr/home/novel/code/libvirt/tests'
CCLD domaincapstest
../src/.libs/libvirt_driver_libxl_impl.a(libvirt_driver_libxl_impl_la-libxl_capabilities.o):
In function `libxlMakeCapabilities':
libxl/libxl_capabilities.c:(.text+0x6b2): undefined reference to
`rpl_regcomp'
libxl/libxl_capabilities.c:(.text+0x6d0): undefined reference to
`rpl_regerror'
libxl/libxl_capabilities.c:(.text+0x803): undefined reference to
`rpl_regexec'
libxl/libxl_capabilities.c:(.text+0xa58): undefined reference to
`rpl_regfree'
clang-3.8: error: linker command failed with exit code 1 (use -v to
see invocation)
This happens because on these system it tries to use gnulib's builtin
regex implementation, but doesn't link to gnulib.
Fix by adding $(GNULIB_LIBS) along with libvirt_driver_libxl_impl.la to
domaincapstest_LDADD.
Commit eee7bd4e introduced two functions: libxlDiskPathToID and
libxlDiskSectorSize.
However, as they're used only by code under #ifdef __linux__,
on non-Linux platforms it results in errors similar to this:
CC libxl/libvirt_driver_libxl_impl_la-libxl_driver.lo
libxl/libxl_driver.c:5263:1: error: unused function 'libxlDiskPathToID' [-Werror,-Wunused-function]
libxlDiskPathToID(const char *virtpath)
^
libxl/libxl_driver.c:5312:1: error: unused function 'libxlDiskSectorSize' [-Werror,-Wunused-function]
libxlDiskSectorSize(int domid, int devno)
^
2 errors generated.
Fix that by moving these functions under the #ifdef __linux__ block.
This event is emitted when a nodedev XML definition is updated,
like when cdrom media is changed in a cdrom block device.
Also includes node device update event implementation for udev
backend, virsh nodedev-event support, and event-test support
https://bugzilla.redhat.com/show_bug.cgi?id=1366611
When commit id 'cb2e3e50' reworked the cmdSecretGetValue call to use
VIR_DISPOSE_STRING for base64, it neglected to initialize the base64
value to NULL since the cleanup: label could be reached prior to the
base64 value being set or not. This resulted in a core dump, adding
the initialization will avoid the issue.
Setting heads to 0 in case that *max_outputs* is not supported while building
command line doesn't have any real effect. It only removes *heads* attribute
from live XML, but after restarting libvirt the default value is restored.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
It may happen that a developer wants to run just a specific
subset of tests:
tests $ VIR_TEST_RANGE=22 ../run ./virschematest
This now fails miserably:
==6840== Invalid read of size 8
==6840== at 0x4F397C0: virXMLValidatorValidate (virxml.c:1216)
==6840== by 0x402B72: testSchemaFile (virschematest.c:53)
==6840== by 0x403737: virTestRun (testutils.c:180)
==6840== by 0x402CF5: testSchemaDir (virschematest.c:98)
==6840== by 0x402EB1: testSchemaDirs (virschematest.c:131)
==6840== by 0x40314D: mymain (virschematest.c:194)
==6840== by 0x4051AF: virTestMain (testutils.c:982)
==6840== by 0x4035A9: main (virschematest.c:217)
==6840== Address 0x10 is not stack'd, malloc'd or (recently) free'd
Problem is, we are trying to do two types of tests here: validate
RNG schema itself, and validate XML files against RNG schemas.
And the latter tries to re-use a resource allocated in the
former. Therefore if the former is skipped (due to
VIR_TEST_RANGE) we have to allocate the resource manually.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When starting a guest and copying host vendor cpuid to the guest
cpu, libvirtd would crash if the host cpu contained a NULL vendor
field. Avoid the crash by checking for a valid vendor in the host
cpu before copying the cpuid to the guest cpu.
For completeness, here is a backtrace from the crash
(gdb) bt
f0 0x00007ffff739bf33 in x86DataCpuid (cpuid=0x8, cpuid=0x8,
data=data@entry=0x7fffb800ee78) at cpu/cpu_x86.c:287
f1 virCPUx86DataAddCPUID (data=data@entry=0x7fffb800ee78, cpuid=0x8)
at cpu/cpu_x86.c:355
f2 0x00007ffff739ef47 in x86Compute (host=<optimized out>, cpu=0x7fffb8000cc0,
guest=0x7fffecca7348, message=<optimized out>) at cpu/cpu_x86.c:1580
f3 0x00007fffd2b38e53 in qemuBuildCpuModelArgStr (migrating=false,
hasHwVirt=<synthetic pointer>, qemuCaps=0x7fffb8001040, buf=0x7fffecca7360,
def=0x7fffc400ce20, driver=0x1c) at qemu/qemu_command.c:6283
f4 qemuBuildCpuCommandLine (cmd=cmd@entry=0x7fffb8002f60,
driver=driver@entry=0x7fffc80882c0, def=def@entry=0x7fffc400ce20,
qemuCaps=qemuCaps@entry=0x7fffb8001040, migrating=<optimized out>)
at qemu/qemu_command.c:6445
(gdb) f2
(gdb) p *host_model
$23 = {name = 0x7fffb800ec50 "qemu64", vendor = 0x0, signature = 0, data = {
len = 2, data = 0x7fffb800e720}}
Since we now pick the default USB controller model when parsing
the guest XML, we can get rid of some duplicated code so that
the default model selection happens in one place only.
Add some comments as well.
Now that the default USB controller model is explicit rather
than implicit for i440fx machines, we have to tweak the
conditions for dropping it in order to keep migration towards
libvirt <= 0.9.4 working.
When the user doesn't specify any model for a USB controller,
we use an architecture-dependent default, but we don't reflect
it in the guest XML.
Pick the default USB controller model when parsing the guest
XML instead of when creating the QEMU command line, so that
our choice is saved back to disk.
==8630== Invalid read of size 8
==8630== at 0x4EA4F0F: virFree (viralloc.c:582)
==8630== by 0x4F398F0: virXMLValidatorFree (virxml.c:1257)
==8630== by 0x40305C: mymain (virschematest.c:191)
==8630== by 0x405159: virTestMain (testutils.c:982)
==8630== by 0x403553: main (virschematest.c:215)
==8630== Address 0xcd72243 is 131 bytes inside a block of size 177 free'd
==8630== at 0x4C2B1F0: free (vg_replace_malloc.c:473)
==8630== by 0x4EA4F19: virFree (viralloc.c:582)
==8630== by 0x4ED0973: virFindFileInPath (virfile.c:1646)
==8630== by 0x405149: virTestMain (testutils.c:980)
==8630== by 0x403553: main (virschematest.c:215)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1353296
On UNIX like systems there are no constraints on what characters
can be in file/dir names (except for NULL, obviously). Moreover,
some values that we think of as paths (e.g. disk source) are not
necessarily paths at all. For instance, some hypervisors take
that as an arbitrary identifier and corresponding file is then
looked up by hypervisor in its table. Instead of trying to fix
our regular expressions (and forgetting to include yet another
character there), lets drop the validation completely.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Usually, this variable is used to hold the return value for a
function of ours. Well, this is not the case. Its use does not
match our pattern and therefore it is very misleading. Drop it
and define an alternative @rc variable, but only in that single
block where it is needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This variable is very misleading. We use VIR_FORCE_CLOSE to set
it to -1 and returning it even though it does not refer to a FD
at all. It merely holds 0 or -1. Drop it completely. Also, at the
same time some corner cases are fixed too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1240439
In this function we create a macvtap device and open its tap
device. Possibly multiple times. Now the thing is, if opening the
tap device fails, that is virNetDevMacVLanTapOpen() returns a
negative value, we unroll all the changes BUT return 0 fooling
caller into thinking everything went okay.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since a9331394 (first release v2.1.0), specifying a manual
security_driver setting in qemu.conf causes the daemon to fail to
start, erroring with 'Duplicate security driver X'.
The duplicate checking was incorrectly comparing every entry
against itself, guaranteeing a false positive.
https://bugzilla.redhat.com/show_bug.cgi?id=1365607
